Answers
Answer: The value of [tex]K_c[/tex] is 2
Explanation:
Moles of [tex]N_2O_4[/tex] = 1.0 mole
Volume of solution = 1.00 L
Initial concentration of [tex]N_2O_4[/tex] = [tex]\frac{1.0mol}{1.00L}=1.0M[/tex]
Equilibrium concentration of [tex]NO_2[/tex] = [tex]\frac{1.0mol}{1.00L}=1.0M[/tex]
The given balanced equilibrium reaction is,
[tex]N_2O_4(g)\rightleftharpoons 2NO_2(g)[/tex]
Initial conc. 1.0 M 0 M
At eqm. conc. (1.0-x) M (2x) M
The expression for equilibrium constant for this reaction will be,
[tex]K_c=\frac{[NO_2]^2}{[N_2O_4]}[/tex]
Given : 2x = 1.0
x= 0.5
Now put all the given values in this expression, we get :
[tex]K_c=\frac{(1.0)^2}{(1.0-0.5)}[/tex]
[tex]K_c=2[/tex]
Thus the value of [tex]K_c[/tex] is 2
Related Questions
The percentage composition of acetic acid is found to be 39.9% C, 6.7% H, and 53.4% O. What is the empirical formula of acetic acid?
Answers
Answer:
CH₂O
Explanation:
From the question given above, the following data were obtained:
Carbon (C) = 39.9%
Hydrogen (H) = 6.7%
Oxygen (O) = 53.4%
Empirical formula =?
The empirical formula of acetic acid can be obtained as follow:
C = 39.9%
H = 6.7%
O = 53.4%
Divide by their molar mass
C = 39.9 / 12 = 3.3
H = 6.7 / 1 = 6.7
O = 53.4 / 16 = 3.3
Divide by the smallest
C = 3.3 / 3.3 = 1
H = 6.7 / 3.3 = 2
O = 3.3 / 3.3 = 1
The empirical formula => CH₂O
For the balanced equation shown below, how many moles of N2 will react with 0.3034 moles of Mg?
3 Mg + N2 Mg3N2
Round answer to 4 sig-figs.
Answers
Answer:
0.1011 moles of N₂
Explanation:
This is the reaction:
3 Mg + N₂ → Mg₃N₂
3 moles of magnesium can react to 1 mol of nitrogen in order to produce 1 mol of magnesium nitride.
We can solve this by a rule of three:
3 mol of Mg need 1 mol of N₂ for the reaction
Then, 0.3034 moles of Mg may react to (0.3034 . 1) / 3 = 0.1011 moles of nitrogen.
The stoichiometry is 3:1
what is the smallest halogen atom
Answers
Answer:
Hey mate...
Explanation:
This is ur answer.....
This is because fluorine atoms are the smallest of the halogens—the atoms are bonded close together, which leads to repulsion between free electrons in the two fluorine atoms.
Hope it helps you,
mark me as the brainliest....
Follow me! :)
C. Which nonmetal appears to attract electrons the most?
Answers
Answer:
Fluorine appears to attract electrons the most.
Answer: The answer to the question would have to be FLOURINE !!
please helppppppppp. ik I'm no smart dont hate
Answers
The answer is C
Why
take oxygen cylinder?
Nitrogen gas is filled inside the electric bulb. Why?
Answers
Answer:
Nitrogen gas is filled inside the electric bulb because it doesn't react with the hot filament. Then, it will carry heat away form the filament to cool it.
An equilibrium mixture of N2, O2and NO gases at 1500K is determined to consist of 6.4 x 10-3Mof N2, 1.7 x 10-3M O2, and 1.1 x 10-5M NO. Write the equilibrium expression and solve for the equilibrium constant (Keq) for the systemat this temperature?
Answers
Answer
Explanation:O2 = 1.7×10-3M;
N2 = 6.4×10-3M;
NO = 1.1 10-5M.
Emma wrote, 'My investigation was good' , as her conclusion.
Philip said this was not a scientific conclusion.
Explain why Emma's conclusion is not scientific
Answers
Answer:
Emma's conclusion is not scientific. She is stating an opinion because she thinks her investigation was good which is not necessarily scientific.
PLEASE HELP!
1) What type of reaction is this?
Zn + 2HCl -----> ZnCl + H
2) Balance the equation (Hint, you need to balance the left side with the right side)
Answers
1) single replacement
2) Zn + 2HCl -----> ZnCl + H
equation is already balanced
After years of hard work you finally come up with a new chemical substance that
will revolutionize the world. What are it's properties? What do you call it? *
Answers
Zit be gone. a chemical that contains many natural healing plants that very quickly gets rid of zits. :) -weak answer but it's an answer I guess
PLEASE HELP ME!!!!!!
1.) List the actual volume of titrant needed to produce a color change for Sample A and Sample B. Answer:
Volume of titrant needed to produce a color change for Sample A: ___ ml Volume of titrant needed to produce a color change for Sample B: ___ ml
2.) There are many aspects to the technique known as titration that are extremely important if results are to be accurate. In a traditional or authentic laboratory setting, these techniques are important and sometimes delicate. List two of the techniques used in this lab that provided you will the most accurate possible results. Describe why these techniques are important and how ignoring the techniques would affect the lab.
Answer:
Technique #1: …
Why technique is important: …
Technique #2: …
Why technique #2 is important: …
3.) The titration procedure you have just performed is similar to what is carried out by water-quality workers throughout the world. They use a kit to perform titration on location instead of in a laboratory. In real-life situations, workers collect water samples in a lake or stream. In lakes and streams calcium carbonate (CaCO3) causes alkalinity. Calcium carbonate acts as a buffer, a substance that serves to resist small changes in acidity or alkalinity in a solution. When acid rain enters lake water, it can be neutralized by the bases present and thus the lake does not become too acidic. Since the key ion is the hydroxide ion, the nature of the location doesn’t matter in this case. All over the world, right now, pollution workers are measuring calcium carbonate in lakes and streams.
If a worker studied two lakes and Lake X had a greater ppm (concentration in parts per million) of calcium carbonate than Lake Z, and both lakes are the exact same size, which of the two lakes would be able to withstand a greater amount of rain that is acidic? Explain your answer.
Answer:
Lake ___ would be able to withstand a greater amount of acid rain.
Explanation: …
Answers
Answer:
the first answer will be for A. 35 and second B. 47 then second no t dude
In the compound H2O electrons are A.gained B.lost C.transferred or D.shared?
Answers
I NEED HELP ASAP!! DO IN A HOUR!! POEASE HELP!!A scientist views different objects using a light microscope. Which features
would the scientist MOST LIKELY see for samples from multicellular organisms?
Select the three correct answers.
small organelle features
cells organized into tissues
large cell size
different types of cells
smaller number of cells
Answers
The features that should the scientist most likely see for the samples from the multicellular organisms should contain different types of cells, Small organelle features, and a smaller number of cells.
What are multicellular organisms?It is considered as the tissue, organ or organism that should be made up of various cells that treated as multicellular. The example involved the animals, plants, and fungi also they have the specialization of distinct cells for many functions.
Therefore, The features that should the scientist most likely see for the samples from the multicellular organisms should contain different types of cells, Small organelle features, and a smaller number of cells.
Learn more about cell here: https://brainly.com/question/8725051
what is the fluid used to make paper?
Answers
Answer:
MSDSs list Liquid Paper as containing titanium dioxide, solvent naphtha, mineral spirits, resins, dispersant, and fragrances. Liquid Paper came under scrutiny in the 1980s, due to concerns over recreational sniffing of the product. The organic solvent 1,1,1-trichloroethane was used as a thinner in the product.
Explanation:
In part A, when you added water to the sodium acetate in the flask, some of the chemical dissolved into the water. Would you call this solution unsaturated, saturated, or supersaturated? Give reasons for your answer.
Answers
Answer: The solution is a SATURATED solution.
Explanation:
Although most substances are soluble in water, some are more soluble than others,that is , their solubilities differ. SOLUBILITY is a means of comparing the extent to which different solutes can dissolve in a particular solvent at a definite temperature.
From the question above, when water was added to the sodium acetate in the flask, SOME of the chemical dissolved into the water, meaning that some remained undissolved. This is because a given volume of water can only dissolve a certain amount of chemical in it at room temperature. If more chemical is added to such a solution, the chemical will remain undissolved. Such a chemical solution is said to be a SATURATED SOLUTION.
A saturated solution of a solute at a particular temperature is on which contains as much solute as it can dissolve at that temperature in the presence of undissolved solute particles.
Unsaturated solution is a type of solution that dissolves all its solutes with no presence of undissolved solute.
Supersaturated solution is one which contains more of the solute than it can normally hold at that temperature. It is an unstable solution which crystallizes out when disturbed.
Answer:
Hello, Im Mack. Hope you are doing well :)
The Correct answer to your Question is: Answer: solution is a SATURATED solution.
Explanation:
-Although most substances are soluble in water, some are more soluble than others,that is , their solubilities differ. SOLUBILITY is a means of comparing the extent to which different solutes can dissolve in a particular solvent at a definite temperature.
-From the question above, when water was added to the sodium acetate in the flask, SOME of the chemical dissolved into the water, meaning that some remained undissolved. This is because a given volume of water can only dissolve a certain amount of chemical in it at room temperature. If more chemical is added to such a solution, the chemical will remain undissolved. Such a chemical solution is said to be a SATURATED SOLUTION.
_________________________________________________________
-A saturated solution of a solute at a particular temperature is on which contains as much solute as it can dissolve at that temperature in the presence of undissolved solute particles.
---Unsaturated solution is a type of solution that dissolves all its solutes with no presence of undissolved solute--
---Supersaturated solution is one which contains more of the solute than it can normally hold at that temperature. It is an unstable solution which crystallizes out when disturbed---
hope this helped you out :)
Comment if you need more help, and I'll reply asap.
Have a great day my Friend, and best of luck to your studies :)
Is the water found in the watershed clean and safe for drinking?
(No plagiarism & will give brainliest)
Answers
What are resistors? please help
Answers
Answer:Resistor Basics
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor's resistance limits the flow of electrons through a circuit.
They are passive components, meaning they only consume power (and can't generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
Resistor units
The electrical resistance of a resistor is measured in ohms. The symbol for an ohm is the greek capital-omega: Ω. The (somewhat roundabout) definition of 1Ω is the resistance between two points where 1 volt (1V) of applied potential energy will push 1 ampere (1A) of current.
As SI units go, larger or smaller values of ohms can be matched with a prefix like kilo-, mega-, or giga-, to make large values easier to read. It's very common to see resistors in the kilohm (kΩ) and megaohm (MΩ) range (much less common to see miliohm (mΩ) resistors). For example, a 4,700Ω resistor is equivalent to a 4.7kΩ resistor, and a 5,600,000Ω resistor can be written as 5,600kΩ or (more commonly as) 5.6MΩ.
Schematic symbol
All resistors have two terminals, one connection on each end of the resistor. When modeled on a schematic, a resistor will show up as one of these two symbols:
Resistor schematic symbols
Two common resistor schematic symbols. R1 is an American-style 1kΩ resistor, and R2 is an international-style 47kΩ resistor.
The terminals of the resistor are each of the lines extending from the squiggle (or rectangle). Those are what connect to the rest of the circuit.
The resistor circuit symbols are usually enhanced with both a resistance value and a name. The value, displayed in ohms, is obviously critical for both evaluating and actually constructing the circuit. The name of the resistor is usually an R preceding a number. Each resistor in a circuit should have a unique name/number. For example, here's a few resistors in action on a 555 timer circuit:
Answer: resistor is
Explanation:
A resistor controls the flow of the electrical current within a circuit. Resistors are made from materials like copper or carbon, which make it difficult for the electrical charges to flow through a circuit. The most common type of resistor is a carbon resistor, which is a general purpose resistor, best suited for lower-powered circuits.
Specify the steps included in the sedimentary rock formation
Answers
Answer:
Sedimentary rocks are the product of 1) weathering of preexisting rocks, 2) transport of the weathering products, 3) deposition of the material, followed by 4) compaction, and 5) cementation of the sediment to form a rock. The latter two steps are called lithification.
What is permafrost? a. dry desert soil c. ice on the tundra b. muddy soil d. soil that is always frozen
Answers
Answer:
d. soil that is always frozen
Explanation:
Permafrost is the layer of ground that remains frozen the complete year. Soil, rocks and sediments collectively together forms the permafrost. Such soil may remain frozen for a period of two or more than two years. A large part of the Earth's surface has been covered by the layer of permafrost. These are found mainly near the high mountains and especially near North and South poles.
1
What is the mass of 0.328 mol of CO2?
Answers
Answer:
use this conversation units to help you hope it helpsIf 45 grams of NaNO3 is dissolved in 100 grams of water at 40 C, how much more is needed to have a saturated solution?
Answers
Answer:
I literally have no idea
Which two statements describe what happens to the nuclei of atoms during a fusion reaction? O A. Large nuclei break apart into two or more smaller nuclei. O B. A small amount of mass in the nuclei that combine is converted to energy. O c. Each nucleus formed has fewer protons than each original nucleus had. O D. Nuclei with small masses combine to form nuclei with larger masses.
Answers
Answer:
D. Nuclei with small masses combine to form nuclei with larger masses.
B. A small amount of mass in the nuclei that combine is converted to energy
Explanation:
A nuclear fusion, in contrary to fission, is the process by which the nuclei of two atoms combine to form a much larger atom with a large nuclei. Likewise, during a fusion reaction, a large amount of energy is released from the small amount of mass in the nuclei (two) that combines.
According to this question, the following are true of a fusion reaction:
- Nuclei with small masses combine to form nuclei with larger masses.
- A small amount of mass in the nuclei that combine is converted to enormous energy.
How many moles are in 5.30 X 1023 molecules of H2O?
Answers
Answer:
0.880 (0.88039867109 to be exact)
Explanation:
To convert from molecules to moles, simply divide by Avogadro's number which is 6.02 x 10^23
So, 5.30x10^23/6.02x10^23 = 0.880
Step 4: Model the energy change in the reaction.
a) Create an energy graph that illustrates the energy change in the reaction.
b) Construct your graph on a blank sheet of paper. Be sure to label the axes, provide a title, and
identify the reactants and products on the graph.
Answers
Answer:
Sorry if this is hard to see, this was the best I could do, but the top line says C3H8 + O2, and the bottom line says CO2 + H20, with the heat input being -2043.96 kJ/mol
Explanation:
This is correct for me
What is the element that lies in group no 29?
Answers
Hope this helps :)
what is the radius of a circle i
s
Answers
who created the system for classfying and naming plants and animals
Answers
Answer:
carolos vonn lennaeus created
Answer:
sapana thapa created
Explanation:
nvhwubyiulrwlucyuyr
the wave pictured represents a sound wave. which label along the wave repeesents a sound with the Lowest energy
Answers
Which of the following is a part of the kinetic-molecular theory?
(PLEASE HELP)
Your answer:
Most of the volume of a gas is occupied by gas particles.
The particles of a gas are in constant, random motion.
The average kinetic energy of a gas is dependent upon the identity of the gas.
Gases have indefinite shape and indefinite volume.
Attractive forces between gas molecules must be accounted for with a gas law calculation.
Answers
Answer:
2)The particles in a liquid are moving past one another constantly.
3)The particles in gas move freely in all directions.
4)The particles in a solid vibrate in a fixed position.
6)The particles in a gas have few attractions between them.
7)The particles in all states of matter are always moving.
Explanation:
What is the molarity of 3 mole of hydrochloride acid in 3 L of water ?
Answers
Answer:
1
Explanation:
Formula of molarity is
[tex]M=\frac{n}{v}[/tex]
M= molarity
n= no of moles
v= volume in liters (if mL then you have to convert it to L)