Answers
Answer:
first one
Explanation:
Related Questions
What’s an example of phase change you’ve seen in real life?
Answers
Answer:
Melting and boiling will be seen in this example. Condensation might be seen as well. In the Phases of Water Gizmo™, you can heat up or cool down a container of water.
Explanation:
I really need help!!! I will give more points to people that actually help!
Name the molars in the unbalanced equation: C_8H_18+O_2=CO_2+H_2O
Then Name the molars in the balanced equation: 2C_8H_18+25O_2=16CO_2+18H_2O
Next list the order of the elements that you balanced the equation with
Answers
Answer:
C8H18 2 114.22852
O2 25 31.9988
CO2 16 44.0095
H2O 18 18.01528
Explanation:
Western regions Facts
Answers
Alaska's land area is much bigger than any other state, but it has one of the lowest populations.
The western US takes up about half of the land of the United States.
The western United States is the region comprising the westernmost states of the United States. As American settlement in the U.S. expanded westward, the meaning of the term the West changed. Before about 1800, the crest of the Appalachian Mountains was seen as the western frontier.
Hope this helps :)
Have a great day!
Concerning the structure of molecules, the biggest factor that affects solubility is
Your answer:
A. polarity
B. tarnish
C. mixiness
Answers
Answer:
A
Explanation:
Have a nice day
Question 2 (2 points) Which of the following is true about finding the molar mass of potassium sulfate, K2SO4?
The molar mass is found by adding the molar mass of K, to the molar mass of sulfate.
The molar mass is found by taking 2 x the molar mass of K, plus 1 x the molar mass of sulfur, plus 4 x the molar mass of oxygen
The molar mass is found by using Avogadro's number divided by 22.4.
The molar mass of potassium sulfate is a number between 1 and 10.
Answers
Answer:
the answer is the 2 nd one ok
Answer:
Did you find the answer for this?
Explanation:
I am doing the test right now
How does polarity of water lead to cohesion and surface tension?
Answers
Answer: The polarity of water molecules means that molecules of water will stick to each other. This is called hydrogen bonding. Polarity makes water a good solvent, gives it the ability to stick to itself cohesion, stick to other substances adhesion, and have surface tension due to hydrogen bonding.
Explanation:
someone help with number 9 please.
both a and b
Answers
A) HF
B) PCl3
could be wrong it’s been a while since i’ve taken science
Answer:
A= Covalent compound
B= Covalent compound
Pedro colocó en invierno una puerta de madera en la entrada principal de su casa. En abril, temporada donde las temperaturas ambientes son muy altas, notó que la puerta rosaba e incluso dañaba parte del piso de su entrada, considerando el factor de la temperatura, ¿Qué fenómeno físico podría ser la causa de lo sucedido?
Answers
Answer:
imbibición
Explanation:
La propiedad responsable del fenómeno observado es la imbibición de la puerta de madera maciza.
La imbibición se refiere a una situación en la que las partículas sólidas de una sustancia absorben agua sin formar una solución.
A medida que la puerta de madera absorbe agua, se hincha. Esto es responsable del levantamiento de la puerta. Esta absorción de agua ocurre cuando la temperatura y la humedad relativa son altas. Esto es así porque el aire más cálido retiene más humedad.
Which of the following are held together by nonpolar covalent bonds?
Answers
PLEASE HELP THIS IS SCIENCE
ILL MARK U BRAINLIEST
Answers
Answer: f=ma
Explanation:
How many moles of gas would occupy 22.4 L at 273K in one arm?
Answers
Answer:
1 mol
Explanation:
Using the general gas law equation as follows:
PV = nRT
Where;
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas law constant (0.0821 Latm/molK)
T = temperature (K)
According to the provided information in the question;
V = 22.4L
T = 273K
P = 1 atm
R = 0.0821 Latm/molK
n = ?
Using PV = nRT
n = PV/RT
n = (1 × 22.4) ÷ (0.0821 × 273)
n = 22.4 ÷ 22.4
n = 1mol
2.
You take a gas at 3 atm and increase the temperature from 120 K to 240 K. What is the final pressure?
A
6 atm
B
Not enough information
C
3 atm
D
1.5 atm
Answers
Answer:
A. 6atm
Explanation:
Using pressure law equation:
P1/T1 = P2/T2
Where;
P1 = initial pressure (atm)
T1 = initial temperature (K)
P2 = final pressure (atm)
T2 = final temperature (K)
According to this question;
P1 = 3 atm
P2 = ?
T1 = 120K
T2 = 240K
Using P1/T1 = P2/T2
3/120 = P2/240
Cross multiply
240 × 3 = P2 × 120
720 = 120P2
P2 = 720/120
P2 = 6atm
Chris' yard has a light brown soil that is very fine. Chris has a hard time finding any rocks, including pebbles, in his yard. Reese's yard has a gray soil that is full of small and medium size rocks. If it rained on both of Chris' and Reese's yards, which yard would likely hold the water above ground the longest? A. Both yards would absorb the water at the same rate. B. Reese's yard C. Chris' yard D. Neither yard would absorb any water.
Answers
Answer:
B. Reese's yard
Explanation:
Because Reese's yard is full of rocks, rock's don't absorb water, while Chris' yard is only soil, which will make his yard absorb water quicker.
will gravitational force change based on a change of mass or a change of distance between objects
Answers
Answer:
The size of the gravitational force is proportional to the masses of the objects and weakens as the distance between them increases.
Which particles make up most of the mass of an atom?
Answers
i think Neuterons i am right
Answer:
I do not know srry
Explanation:
molar volume problems
Answers
5.
Primary succession occurs when pioneer species move into an area that has no plants. Which organisms are common pioneer species?
A Conifer trees and tall grasses with roots that loosen the soil
B. O Mosses and lichens that can grow on rocky surfaces
c. Grasses and weeds that arrive as seeds carried by the wind and then germinate in rich soil
D. O Vines and shrubs that help prevent the erosion of shallow soil
No
Answers
Answer:
C
Explanation:
Primary succession occurs when pioneer species move into an area that has no plants. This happens because of Mosses and lichens that can grow on rocky surfaces and the correct option is option B.
What is Primary Succession?Primary succession refers to the establishment of a community in an uninhabited area such as rocks.
It is a type of ecological succession (the evolution of a biological community’s ecological structure) in which plants and animals first colonize a barren, lifeless habitat.
Species that arrive first in the newly created environment are called pioneer species, and through their interactions they build a simple initial biological community.
Therefore, Primary succession occurs when pioneer species move into an area that has no plants. This happens because of Mosses and lichens that can grow on rocky surfaces and the correct option is option B.
Learn more about Primary Succession, here:
https://brainly.com/question/14059609
#SPJ2
Saturated molecules of this nutrient, which may predispose humans to cardiovascular disease, are solid at room temperature.
Answers
DONT SKIP OR ELSE what solids, liquids, and gases does the human body produce
Answers
farting pooping peeing :3
Which are examples of science rather than pseudoscience? Check all that apply. People can get rid of hiccups by holding their breath. The US surgeon general's 1964 report declared that smoking cigarettes was linked to cancer. Going outside with wet hair will cause a person to catch a cold. The average global temperature of the Earth has increased by almost two degrees in the last century. People should not swim right after eating because they could develop severe muscle cramps and drown.
Answers
Answer:
2.The US surgeon general’s 1964 report declared that smoking cigarettes was linked to cancer.4.The average global temperature of the Earth has increased by almost two degrees in the last century.
Explanation:
on edge
Answer:
2 and 4
Explanation:
I just did it....
How many grams of NaCl is needed to make 750mL of a 2.4 M NaCl solution?
Answers
Answer:
Molarity of the solution = 3.000 M
Volume of the solution = 250.0 mL = 0.25 L
moles in 250.0 mL = molarity x volume of the solution
= 3.000 M x 0.25 L
= 0.75 mol
Hence, 0.75 mol of NaCl is needed to prepare 250.0 mL of 3.000 M NaCl solution.
Moles (mol) = mass (g) / molar mass (g/mol)
Moles of NaCl in 250.0 mL = 0.75 mol
Molar mass of NaCl = 58.44 g/mol
Mass of NaCl in 250.0 mL = Moles x Molar mass
= 0.75 mol x 58.44 g/mol
= 43.83 g
Hence, 43.83 g of NaCl is needed to prepare 250.0 mL of 3.000 M solution.
Explanation:
If you have 0.045 L of 0.465 M potassium bromide. How many moles of potassium bromide are present?
A.)0.0209 mol
B.)0.02 mol
C.)0.021 mol
D.)20.9 mol
Answers
The number of moles of solute in a solution is the product of the molarity and volume of the solution. The number of moles in 0.045 L of 0.465 M potassium bromide is 0.0209 mol. Hence, option A is correct.
What is molarity ?Molarity of a solution is the ratio of its number of moles of solute to the volume of solution in liters. Molarity is the most common term used to express the concentration of a solution.
Molarity is a colligative property thus depends on the amount of substance and it is temperature dependant.
molarity = no.of moles/ volume in L
Given that volume of the potassium bromide solution = 0.045 L
molarity = 0.465 M
then, number of moles of potassium bromide solute = molarity × volume
no.of moles = 0.465 M × 0.045 L = 0.0209 mol.
Therefore, there are 0.0209 moles of potassium bromide is present in the solution.
To find more on molarity, refer here:
https://brainly.com/question/8732513
#SPJ2
Karen has 21 green blocks. The ratio of green blocks to the yellow blocks she owns is 3:1. How many blocks does she own?
Answers
Answer:
28 blocks
Explanation:
Amount: 21 + y
Ratio: 3:1
Total Ratio: 4
1 = yellow blocks
say if 3 is to 1 then 21 is to how many?
21 ÷ 3
= y = 7
= 21 + 7
= 28 blocks
( or you can use the practical method using your fingers )
13. An organic compound is found to contain 77.42% of C, 7.53% of H and
nitrogen. The mass of 1.12L of its vapour at NTP is 4.65g. Determine
the
empirical and molecular formula of the compound.
Answers
Answer
7.53% 97% if you divide it you can get the answer
Explanation:
Is farting an example of an exothermic reaction?
*for real though I have never heard of a cold fart
Answers
Answer:
i would assume i mean who has cold farts
Explanation:
Yes, farting is an example of an exothermic reaction.
What is an exothermic reaction?A reaction that is chemical in nature and is characterized by the release of energy in the form of heat or light is called an exothermic reaction.
Farting is a normal part of digestion that reflects the activity of the bacteria in your gut.
Yes, farting is an example of an exothermic reaction.
Learn more about the exothermic reaction here:
https://brainly.com/question/10373907
#SPJ2
If I have 38g of MgCl2, how many moles do I have?
Answers
Answer:
0.3991
Explanation:
no. of moles = mass/molar mass.so lets get the molar mass of MgCl2
(Mg=24.305 and Cl=35.453) so the molar mass of MgCl2= 24.305+(2*35.453)
molar mass of MgCl2= 95.211
now lets get the no of moles:no of moles=38g/95.211=0.3991
The mass numbers for the elements in the periodic table.............as the atomic numbers.................. *
a. increase; decrease
b. increase; increase
c. decrease; decrease
d. decrease; increase
Answers
Answer:
d
Explanation:
How many liters of CH4 gas are there in 1.20 moles of CH4 when the gas is held under standard conditions?
Please answer quickly!
Answers
Answer:
26.88 L
Explanation:
When any gas is held under standard conditions, one mol will occupy 22.4 liters.
With the above information in mind, we can calculate how many liters would 1.20 moles of CH₄ gas occupy under standard conditions:
1.20 mol * 22.4 L/mol = 26.88 L
So 1.20 moles of CH₄ would occupy 26.88 liters.
Which of the following describe the medium of a wave?
Group of answer choices
Measuring the distance between the levels of a wave at rest and its crest.
Measuring the distance between the crests of two waves
Water is the material an ocean wave moves through
Energy is what forms all waves
Answers
Answer: Water is the material an ocean wave moves through.
Explanation: An ocean wave and a sound wave are very similar because the water acts as the medium. The waves travel through the water just like a sound wave would travel through the medium.
PLZ HELPP!!! WILL GIVE EXTRA POINTS AND BRAINLIEST!!! DUE IN 15 MINUTES!!!
As a scuba diving air tank is filled with air, the air is compressed in the tank to as much as 3000 psi of pressure. When filling the tank, it is observed that the tank becomes warmer.
Which argument BEST explains why this occurs?
A
When air is compressed, it turns solid. A short time later, the air evaporates back into a gas which releases heat.
B
When air is compressed, the molecules line up into a crystalline structure. As the molecules line up, they release energy in the form of heat.
C
When air is put into the tank, it expands rapidly, thereby raising the temperature.
D
Air molecules are free to move and as more air is added to the tank, the molecules move and collide faster which raises the temperature.
Answers
Answer:
The gas under pressure subjected to heat can cause the tank to explode. A scuba tank filled to capacity with compressed air at 3000 psi could just as easily go up to 3400-3500 psi if heated
Explanation:
Air molecules are free to move and as more air is added to the tank, the molecules move and collide faster which raises the temperature. Hence option D is correct.
What is pressure?Pressure is defined as the force applied perpendicularly to an object's surface divided by the surface area over which it is applied. The movement of the molecules and the collisions they have with one another and the vessel walls cause the pressure to build up. According to general relativity theory, pressure contributes to the mass-energy cause of gravity by making a gravitational field stronger.
The tank may blow up if the gas within was under pressure and exposed to heat. If heated, the pressure of a scuba tank filled to capacity with compressed air at 3000 psi may readily increase to 3400-3500 psi. Because air molecules are free to move, the temperature in the tank rises as more air is introduced, as the molecules move and collide more quickly.
Thus, air molecules are free to move and as more air is added to the tank, the molecules move and collide faster which raises the temperature. Hence option D is correct.
To learn more about pressure, refer to the link below:
https://brainly.com/question/12971272
#SPJ2