4. True
5. The amplitude of the ripples decreases as the circumference of the circle increases.
What is a wave?A wave is a disturbance that moves energy from one place to another.
Radio waves, gamma-rays, visible light, and all the other parts of the electromagnetic spectrum are electromagnetic radiation. Electromagnetic radiation can be described in terms of a stream of mass-less particles, called photons, each travelling in a wave-like pattern at the speed of light. Hence, the statement is true.
As the disturbance moves outwards the energy it carries is spread over a larger and larger region called the wavefront. For example, the ripples in the water lie in a circle with an ever-increasing circumference. The amplitude of the ripples decreases as the circumference of the circle increases.
Learn more about the Electromagnetic wave here:
https://brainly.com/question/3101711
#SPJ1
not sure on what to do
Answer:
It's the first answer
Explanation:
Aqueous just means that the solution is just dissolved in water
How many atoms from the following molecule will be detected in a 13c nmr experiment? we are not asking for unique signals, just total number of atoms
The structure of the compound, there will be ten unique signals in the carbon 13 NMR of the compound.
What are NMR signals?The NMR signals shows the atoms in a compound that are in unique chemical environments. The atoms that are in the same chemical environment will only give one signal.
Based on the structure of the compound, there will be ten unique signals in the carbon 13 NMR of the compound.
Learn more about carbon 13 NMR :https://brainly.com/question/9442853
#SPJ12
Express in scientific notation. Choose the answer with the proper number of significant figures: 1.24 x 10^6/6.2 x 10^-3
Answer:
1.24×10^6/6.2×10^-3
200
acc to scientific notation: 0.2×10^3 is the answer
Explanation:
pls mark me as brainlest
Question 3
Not yet
answered
Points out of
If you dissolve 2.70 g of NaCl in 425 mL of water, what is the molarity of the
solution? (Report your answer to three places past the decimal point. Moodle is
looking for a number only, no units.)
Answer: 0.118M
Explanation:
The formula for molarity is: [tex]M=\frac{mol solute}{L solution}[/tex]
First, we need to find the number of moles of NaCl.
[tex]2.70gNaCl*\frac{1molNaCl}{58.44gNaCl} =0.05molNaCl[/tex]
Next, we must convert millimeters to liters. We can do that by dividing the number of mL by 1000.
[tex]\frac{425mL}{1000} =0.425L[/tex]
Now we have our needed data! All we need to do now is plug in our data to the molarity formula.
[tex]M=\frac{0.05mol}{0.425L} =0.118M[/tex]
I hope this helps! Pls mark brainliest!! :)
Why do lunar and solar eclipses not happen every month?
Rafa then places some zinc in a solution of lead nitrate. A displacement
reaction takes place. Write the word equation for this reaction.
Answer:
Explanation:
A solution of zinc metal and lead nitrate react to form zinc nitrate and lead metal.
Zn(s) + Pb(NO3)2 = Zn(NO3)2 + Pb
Liquid tetrabromoethane has a density of 2.96 g/mL. A barometer is constructed using tetrabromoethane instead of mercury. If the atmospheric pressure is 0.971 atm, what is the height of the tetrabromoethane column in the barometer in cm
16.06 cm is the height of the tetra bromoethane column in the barometer in cm.
What is barometer?A barometer is a scientific instrument used to measure atmospheric pressure, also called barometric pressure.
Explanation:
Pressure of the liquid column=ρgh
ρ= density of the liquid
h= height of the column
g= due to gravity
the
height of the mercury column corresponding to 0.971 atm
= 0.951×76÷1atm = 73.796 cm
[tex]\rho_1h_1g=\rho_2h_2g[/tex]
2.96 g/mL x 73.796 cm =13.6 g/mL [tex]h_2[/tex]
[tex]h_2[/tex]=16.06148235 =16.06 cm
16.06 cm is the height of the tetra bromoethane column in the barometer in cm.
Learn more about the barometer here:
https://brainly.com/question/14283341
#SPJ1
Natural gas (CH4) has a molar mass of 16.0 g/mole. You started out the day with a tank containing 200.0 g of natural gas. At the end of the day, your tank contains 30.0 g of natural gas. How many moles of gas did you use
Considering the definition of molar mass, the moles of gas used are 10.625 moles.
Definition of molar massThe molar mass of substance is a property defined as its mass per unit quantity of substance, in other words, molar mass is the amount of mass that a substance contains in one mole.
Amount of moles usedNatural gas has a molar mass of 16.0 g/mole.
You started out the day with a tank containing 200.0 g of natural gas. So, you can apply the following rule of three: If by definition of molar mass 16 grams are contained in 1 mole, 200 grams are contained in how many moles?
[tex]amount of moles at the beginning=\frac{200 gramsx1 mole}{16 grams}[/tex]
amount of moles at the beginning= 12.5 moles
At the end of the day, your tank contains 30.0 g of natural gas. So, you can apply the following rule of three: If by definition of molar mass 16 grams are contained in 1 mole, 30 grams are contained in how many moles?
[tex]amount of moles at the end=\frac{30 gramsx1 mole}{16 grams}[/tex]
amount of moles at the end= 1.875 moles
The number of moles used will be the difference between the number of moles used initially and the contents at the end of the day.
moles used= amount of moles at the beginning - amount of moles at the end
moles used= 12.5 moles - 1.875 moles
moles used= 10.625 moles
Finally, the moles of gas used are 10.625 moles.
Learn more about molar mass:
brainly.com/question/5216907
brainly.com/question/11209783
brainly.com/question/7132033
brainly.com/question/17249726
#SPJ1
what has the highest volume 1kg lead, 1kg of iron, 1kg of gold, or 1kg of copper
Answer:
1kg gold because when it's mined it needs stronger machines
1kg gold because when it's mined it needs stronger machines.
What is volume?The amount of space occupied by a three-dimensional figure as measured in cubic units.
Gold is called a heavy metal because of its high density, which comes from the fact that each of its atoms is individually very heavy.
Hence, 1kg gold because when it's mined it needs stronger machines.
Learn more about volume here:
https://brainly.com/question/27990934
#SPJ2
When some water condensed
onto a glass, it released 9.15 Cal
of energy. How many joules of
energy is this?
[?] joules
When we convert 9.15 Calories to joules, the result obtained is 38.28 Joules
How do i convert 9.15 calories to joules?From the question given above, the following data were obtained:
Energy (in Calories) = 9.15 caloriesEnergy (in Joules) =?The conversion scale to convert calories to joules is given below:
1 Calorie = 4.184 Joules
Using the above scale, we can convert 9.15 calories to joules as shown below:
1 Calorie = 4.184 Joules
Therefore,
9.15 Calories = (9.15 Calorie × 4.184 Joules) / 1 Calorie
9.15 Calories = 38.28 Joules
Thus, we can conclude from the above calculation that the energy in joules is 38.28 Joules
Learn more about conversion:
https://brainly.com/question/15429675
#SPJ1
Answer:
38,200J
Explanation:
9.15 x 4.18 x 1000= 38,247 → 38,200J
A sample of a gas at room temperature occupies a volume of 24.0 L at a pressure of 602 torr . If the pressure changes to 3010 torr , with no change in the temperature or moles of gas, what is the new volume, V2
Answer:
V₂ = 4.80 L
Explanation:
Because you are dealing solely with pressure and volume, you can find the new volume using the Boyle's Law equation. The general equation looks like this:
P₁V₁ = P₂V₂
In this form, "P₁" and "V₁" represent the initial pressure and volume. "P₂" and "V₂" represent the new pressure and volume. You have been given all of the variables but V₂. Therefore, by plugging these values into the equation, you can simplify to find your answer.
P₁ = 602 torr V₁ = 24.0 L
P₂ = 3010 torr V₂ = ?
P₁V₁ = P₂V₂ <---- Boyle's Law equation
(602 torr)(24.0L) = (3010 torr)V₂ <---- Plug variables into equation
144448 = (3010 torr)V₂ <---- Multiply 602 and 24.0
4.80 = V₂ <---- Divide both sides by 3010
Please help!
Three sections of the periodic table are labeled A, B, and C in the image below.
Which of the following statements is most likely true for an element present in section A?
It is dull and brittle.
It is malleable and ductile.
It is a liquid at room temperature.
It is a poor conductor of electricity.
Answer:
they are metals so they are:-
-malleable
-ductile
because metallic bonding is the same in all direction throughout the solid
A gaseous hydrogen is stored at 500 Bar and 25 oC in a composite storage with an internal volume of 220 liters. Determine the mass of the hydrogen in the tank. Use a compressibility factor Z
The mass of the hydrogen gas in tank, given the data is 6.17 Kg
Data obtained from the questionPressure (P) = 500 Bar = 500 × 0.986923 = 493.4615 atmTemperature (T) = 25 °C = 25 + 273 = 298 K Volume (V) = 220 L Gas constant (R) = 0.0821 atm.L/Kmol Compressibility factor (z) = 1.45Molar mass of hydrogen gas = 2.016 g/molMass of hydrogen gas (m) =? How to determine the mass
PV = znRT
Divid both sides by zRT
n = PV / zRT
but
mole (n) = mass (m) / molar mass (M)
Thus,
m / M = PV / zRT
m = MPV / zRT
m = (2.016 × 493.4615 × 220) / (1.45 × 0.0821 × 298)
m = 6169 g
Divide by 1000 to express in Kg
m = 6169 / 1000
m = 6.17 Kg
Complete question
A gaseous hydrogen stored at 500 Bar and 25°C in a composite storage with an internal volume of 220 liters. Determine the mass of the hydrogen in the tank. Use a compressibility factor Z = 1.45
3.06 kg
6.17 kg.
13.0 kg
5.05 kg
Learn more about ideal gas equation:
https://brainly.com/question/4147359
#SPJ11
The main environmental factors that affect microorganism growth include chemical inhibitors, oxygen, pH, nutrients, moisture and...
The main environmental factors that affect microorganism growth include chemical inhibitors, oxygen, pH, nutrients, moisture and temperature.
What are micro organism?Micro Organism are organism that can be seen with a microscope.
Microorganisms include bacteria, protozoa, algae, and fungi.
Micro organisms exist in its single-celled form or as a colony of cells.
The main environmental factors that affect microorganism growth include chemical inhibitors, oxygen, pH, nutrients, moisture and temperature.
learn more on micro organism here: https://brainly.com/question/18051752
#SPJ12
10.5 mL of an unknown solution are diluted to 80.0 mL. The concentration of the
new solution was determined to be 0.172 M. What was the molarity of the
unknown solution? (Report your answer to two places past the decimal point.
Moodle is looking for a number only, no units.)
Taking into account the definition of dilution, the molarity of the unknown solution is 0.133 M.
DilutionDilution is the process of reducing the concentration of solute in solution, which is accomplished by simply adding more solvent to the solution at the same amount of solute.
In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.
A dilution is mathematically expressed as:
Ci×Vi = Cf×Vf
where
Ci: initial concentrationVi: initial volumeCf: final concentrationVf: final volumeInitial concentrationIn this case, you know:
Ci= ?Vi= 10.5 mLCf= 0.172 MVf= 80 mLReplacing in the definition of dilution:
Ci× 10.5 mL= 0.172 M× 80 mL
Solving:
Ci= (0.172 M× 80 mL)÷ 10.5 M
Ci= 0.133 M
In summary, the molarity of the unknown solution is 0.133 M.
Learn more about dilution:
brainly.com/question/6692004
brainly.com/question/16343005
brainly.com/question/24709069
#SPJ1
The diagram represents the general equation for photosynthesis.
What does the X represent?
hydrogen
oxygen
glucose
carbon dioxide
Answer:
The diagram represents the general equation for photosynthesis.
What does the X represent?
Explanation:
Carbon dioxide
What is produced during the replacement reaction of ba(no3)2 and na2so4? 2bana 2no3so4 2nano3 baso4 nano3 baso4 bana2 (no3)2so4
2NaNO3(aq) + BaSO4 = Ba(NO3)2(aq) + Na2SO4(aq) (s)
Procedures involved:
The cations or anions may transfer positions in this twofold replacement/displacement reaction, which results in AB + CD AD + CB. In such a reaction, water, an insoluble gas, or an insoluble solid must be one of the byproducts (precipitate). The reaction in question has the following molecular equation:
2NaNO3(aq) + BaSO4 = Ba(NO3)2(aq) + Na2SO4(aq) (s)
Double displacement:
When two atoms or groups of atoms swap positions, a double displacement reaction occurs, creating new compounds. Typically, aqueous solutions are where it happens.
Na2SO4 + BaCl2 BaSO4 + 2NaCl is an example of a double displacement reaction.
To learn more about double displacement refer :https://brainly.com/question/23918356
#SPJ4
Chemical bonds are formed when valence electrons are:
Chemical bonds are formed when valence electrons are shared or donated.
Chemical bondsChemical bonds are formed between two or more atoms when electrons are transferred or shared between or among the participating atoms.
For example, ionic bonds are formed when a metal ion such as Na donates its valence electrons to a non-metallic ion such as Cl to form NaCl.
Covalent bonds are formed when participating ions shared their valence electrons to give each other octet states.
More on chemical bonds can be found here: https://brainly.com/question/6071754
#SPJ12
If you know the velocity at which an object is moving, which two things do you know about the object's motion?
O speed and direction
O
distance and speed
time and distance
O direction and time
Answer:
speed and direction are the two things
HELP FAST PLEASE! What is the limiting reactant if 43.4 g of NH3 react with 30 g of NO? The balanced equation is 4NH3 + 6NO --> 5N2 + 6H2O.
Choices:
A. H2O
B. NH3
C. NO
D. N2
The limiting reactant in the reaction is the NO molecule.
What is limiting reactant?The limiting reactant is the reactant that is present in the least amount in the reaction. The rate of reaction depends on the limiting reactant.
Given the reaction; 4NH3 + 6NO --> 5N2 + 6H2O.
Number of moles of NH3 = 43.4 g/17 g/mol = 2.55 moles
Number of moles of NO = 30 g/30 g/mol = 1 mole
Now if 4 moles of NH3 reacts with 6 moles of NO
2.55 moles of NH3 reacts with 2.55 moles * 6 moles/ 4 moles
= 3.8 moles
Hence, the limiting reactant in this reaction is NO.
Learn more about limiting reactant:https://brainly.com/question/14225536
#SPJ1
What mass of reactants are used
during the reaction?
Iron + Sulfur➜ Iron Sulfide
27.50 g
? g
Give your answer to the correct number of
significant figures.
(g) Iron + Sulfur
Answer:
27.50 g
Explanation:
Unless weight was somehow gained/lost during the reaction, the products should weigh as much as the reactants. Since this isn't specified the mass of the reactants should be equal to the mass of the products.
GIVING 17 POINTS PLS HELP ME!!!!
Which of the following statements is true about hydropower?
A. It releases carbon dioxide.
B. It can produce harmful chemicals.
C. It can affect fish and other marine life.
D. It uses gas trapped under Earth's surface.
Hydropower can affect fish and other marine life which is the true statement and is denoted as option C.
What is Hydropower?
This is the process in which water energy is converted into electrical energy through the use of dams and turbines.
When the dams are created, it blocks the path of marine activities and limits them to certain activities such as reproduction.
Read more about Hydropower here https://brainly.com/question/8934285
#SPJ1
what must happen for carbon dioxide to sublimate at a given pressure?
a. energy must transfer from the carbon dioxide to its surroundings.
b. the average kinetic energy of the carbon dioxide molecules must
decrease.
o c. the orderliness of the carbon dioxide molecules must increase.
d. energy must transfer to the carbon dioxide from its surroundings.
Answer: d. energy must transfer to the carbon dioxide from its surroundings.
Explanation:
Sublimation is the phase change from a solid to a gas, meaning that the particles will have more kinetic energy (since particles in the solid phase are more ordered than particles in the gas phase, and thus particles in the gas phase have more energy). Thus, for sublimation to occur, the particles need more energy, which must come from its surroundings.
If you keep a gas's temperature constant, how would you increase the volume of the gas?
a. You would change the temperature
b. You would increase the pressure
c. You would decrease the temperature
d. You would decrease the pressure
Answer: d. You would decrease the pressure
Explanation:
If the temperature of a gas is held constant, the pressure and volume vary inversely.
If the gas's temperature remains constant, then increase the volume of the gas with a decrease in the pressure. Therefore, option (D) is correct.
What is Boyle's law?Boyle’s law can be described as at a constant temperature, the pressure exerted by a given mass of gas being inversely proportional to the volume occupied by the gas.
The pressure and volume of a gas at a particular temperature have an inverse relationship.
P ∝ 1/V
or P₁ .V₁ = P₂. V₂ ................ (1)
Where the initial and final pressure of the gas is P₁ and P₂ respectively. The initial and final volume of the gas is V₁ and V₂ respectively at temperature 'T'.
Therefore, if we keep the temperature of the gas constant. them the volume of the gas will increase only if we decrease the pressure of the gas.
Learn more about Boyle's law, here:
brainly.com/question/1437490
#SPJ2
Explain how you know it must be oxygen. Where
did the oxygen come from?
Intro
Previous Activity
I
000
O Tutoring Help
Answer:
oxygen is a present in our atmosphere and mixed with other gases on the surrounding screen plants are also measure source of getting oxygen they take carbon dioxide from making their food by for the cities and give away oxygen in return
Explanation:
most of the earth oxygen comes from tiny Ocean plants are called phytoplaston
How much sodium bicarbonate to raise alkalinity in pool.
Answer:
A rule of thumb is that 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool's pH is tested below 7.2, add 3-4 pounds of baking soda. If you're new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.
When you breathe, oxygen binds to the hemoglobin in your lungs and then is released into tissue cells. What type of reaction is this? A. Haber B. Irreversible C. Reversible D. Double replacement
Answer:
i believe c. reversible
Explanation:
oxygen combines with hemoglobin and detaches
Answer:
c
Explanation:
same answer i got from quiz
Convert from moles to particles 6.02x1023 particles 1 mole Question 2. 2.7 moles of lithium Question 3. 1.8 moles of sodium chloride
Considering the definition of Avogadro's number:
the number of molecules of lithium is 1.62621×10²⁴ molecules.the number of molecules of sodium chloride is 1.08414×10²⁴ molecules.Definition of Avogadro's numberAvogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole. Avogadro's number applies to any substance.
Amount of molecules in this caseYou can apply the following rule of three, considering the Avogadro's number: If 1 mole of lithium contains 6.023×10²³ molecules, 2.7 moles of lithium contains how many molecules?
amount of molecules of lithium= (6.023×10²³ molecules × 2.7 moles)÷1 mole
amount of molecules of lithium=1.62621×10²⁴ molecules
Finally, the number of molecules of lithium is 1.62621×10²⁴ molecules.
On the other hand you can apply the following rule of three, considering the Avogadro's number: If 1 mole of sodium chloride contains 6.023×10²³ molecules, 1.8 moles of sodium chloride contains how many molecules?
amount of molecules of sodium chloride= (6.023×10²³ molecules × 1.8 moles)÷1 mole
amount of molecules of sodium chloride=1.08414 ×10²⁴ molecules
Finally, the number of molecules of sodium chloride is 1.08414×10²⁴ molecules.
Learn more about Avogadro's Number:
brainly.com/question/11907018
brainly.com/question/1445383
brainly.com/question/1528951
#SPJ1
What is the weighted average of a
bean in the sample data given?
Sample Number
of Beans
Black
Eyed Peas
Cannellini
Beans
410
90
Abundance Mass
(%)
(g)
1.32
82
18
2.94
Weighted
Average (g)
[?]
Answer: 1.6116
Explanation:
[tex](1.32)(0.82)+(2.94)(0.18)=\boxed{1.6116}[/tex]
The weighted average of a bean in the given sample data is equal to 1.6116 g.
What is the Weighted Average?The weighted average can be described as a calculation that takes into account the varying degrees of importance of the numbers in a data set. Each number is multiplied by a predetermined weight in the given data set before the final calculation is made in calculating a weighted average.
A weighted average assigns weights that calculate in advance the relative abundance of each data point. A weighted average is commonly determined to equalize the frequency of the values in a data set.
Given the abundance of Black eyes peas, m₁ = 82% = 0.82
The mass of the Black eyes peas, W₁ = 1.32 g
the abundance of cannellini beans, m₂ = 18% 0.18
The mass of cannellini beans, W₂ = 2.94 g
The weighted average = m₁W₁ + m₂W₂ = 1.32× 0.82 + 2.94 ×0.18
The weighted average of a bean = 1.6116 g
Therefore, the weighted average of a bean in the sample is 1.6116 g.
Learn more about the weighted average, here:
https://brainly.com/question/18205277
#SPJ2
What is the correct formula that would result from the combination of the two ionic species?
Cs¹+ and Cl¹-
Answer: CsCl
Explanation:
When naming ionic compounds, the metal comes before the nonmetal.