when you blow across the top of a soda bottle it acts like a closed pipe. if it creates a fundamental frequency of 680 Hz, how deep is the bottle? (Speed of sound = 343 m/s) (Unit = m)
Answer:
0.125
Explanation:
acellus
A 400 N girl standing on a dock exerts a force of 100 N on a 1000 kg sailboat as she pushes it away from the dock. How much force does the sailboat exert on the girl?
Answer:
The boat pushes back on the girl with an equal force of 100N
Explanation:
Newton's third law of forces explains that action and reaction are equal and opposite. This means that for every action of a force, there is an equal but opposite reaction.
In our case, as the girl pushes on the boat with a force of 100N, the boat pushes back with a force of 100N also, following Newton's third law
4.00 kg glass coffee cup is 30.0°C at room temperature. It is then plunged into hot dishwater at a temperature of 90.0°C, as shown in Figure below. If the temperature of the cup reaches that of the dishwater, how much heat does the cup absorb? C glass = 837 (J/kg.C)*
Answer:
Q = 200800 Joules.
Explanation:
Given the following data;
Mass = 4kg
Initial temperature = 30.0°C
Final temperature = 90.0°C
Specific heat capacity of glass = 837 J/kg°C
To find the quantity of heat absorbed;
Heat capacity is given by the formula;
[tex] Q = mcdt[/tex]
Where;
Q represents the heat capacity or quantity of heat.
m represents the mass of an object.
c represents the specific heat capacity of water.
dt represents the change in temperature.
dt = T2 - T1
dt = 90 - 30
dt = 60°C
Substituting the values into the equation, we have;
[tex] Q = 4*837*60[/tex]
Q = 200800 Joules.
Therefore, the amount of heat absorbed is 200800 Joules.
characteristics of saturn
Saturn is a planet in solar system. It's ring is made out of small covered ice particle. It has over 30 moons.
A yodeler yodels at a cliff 2000 m away. The sound of the echo returns in 9.8 s. If the wavelength of the sound wave is .85 m then what is the period of the sound wave?
Answer:
Hey man, are you who I think you are? ... you used your student number on your account.... anyways im in your class :) guess who I am for free points. so the formula for period is Period=Wavelength/Velocity, so P=.85/velocity, to find velocity would be using the formula speed=distance/time, so the velocity is 2000/9.8 which is around 204.0816327.... so back to period formula, P=.85m/204.08 which gives a period of .004165. But im not entire sure so you have to check that on your own. (gl guessing who I am. hehe)
Explanation:
What are some of the skills required to play floor hockey?
Answer:
Skills required to play floor hockey include passing, receiving passes, shooting, stick- handling (dribbling), defensive skills and goaltending. Players are allowed to use both sides of the blade of the stick. The front side is called the forehand (face) and the back side is called the backhand.
In a series circuit, there is a 2-ohm resistor with a current of 5A. If there is another resistor with a resistance of 5 ohms, what is the current inside that resistor?
Answer:
if 2ohms gives 5A
then 5ohms will give 12.5A
since its directly proportional
V=IR
QUESTION 1
(Show your work)
mi
R
Two children, of masses m1 = m2 = 20 kg,
ride on the perimeter of a small merry-
go-round. The merry-go-round is a disk
of mass M = 30 kg
and radius R = 3 m, as shown in the figure
below.
The moment of inertia of the system
(merry-go-round, child 1, child 2) about
the center of the merry-go-round is
equal to:
M M
m2
Which of Kepler's laws helps you compare the velocities of different planets?
see this and you
try to understand
Kepler's third law of planetary motion helps you compare the velocities of different planets.
What are Kepler's laws?The orbits of planets around the Sun are described by Kepler's laws of planetary motion, which he published between 1609 and 1619.
The laws replaced the circular orbits and epicycles of Nicolaus Copernicus' heliocentric theory with elliptical trajectories and provided an explanation for the variation in planetary velocities. As per the three laws:
A planet's orbit is an ellipse with one of its two foci being the Sun.A line segment connecting a planet and the Sun sweeps out the same amount of space over the same amount of time.A planet's semi-major axis length and orbital period are inversely related to one another.Hence, Kepler's third law of planetary motion helps you compare the velocities of different planets.
Learn more about Kepler's third laws here:
https://brainly.com/question/1086445
#SPJ6
A lady holds a large concave mirror of focal length 1.8m from her face.State two characteristics of her image in the mirror.
Answer:
reflection and refraction?
Explanation:
XOXO
Kit
Pilings are driven into the ground at a building site by dropping a 2250 kg object onto them. What change in gravitational potential energy does the object undergo if it is released from rest 16.0 m above the ground and ends up 1.30 m above the ground ? Change in gravitational potential energy:
Answer: 324.135 kJ
Explanation:
Given
Mass of dropping is [tex]m=2250\ kg[/tex]
The initial height of dropping is [tex]h_1=16\ m[/tex]
The final height of dropping [tex]h_2=1.3\ m[/tex]
Gravitational potential energy is the function of height i.e.
[tex]\Rightarrow \text{G.E.}=mgh[/tex]
Change in Gravitational Energy is
[tex]\Rightarrow \Delta \text{G.E.}=mg(h_1-h_2)=2250\times 9.8\times (16-1.3)\\\\\Rightarrow \Delta \text{G.E.}=3,24,135\ J\approx 324.135\ kJ[/tex]
If a car has a mass of 1,000 kilograms, and a velocity of 35 m/s. What is its momentum?
[tex]\vec{p}=m\vec{v}\\p = 1000 * 35=35000[\frac{kg*m}{s}][/tex]
Energy from the sun is used by solar collectors to heat water or by solar cells to store energy for electricity. One disadvantage of solar energy is that _____
Answer: lots of them
Explanation:
what would be the answer for this and how?
Answer:
B. 6 cm
Explanation:
First, we calculate the spring constant of a single spring:
[tex]k = \frac{F}{\Delta x}\\[/tex]
where,
k = spring constant of single spring = ?
F = Force Applied = 10 N
Δx = extension = 4 cm = 0.04 m
Therefore,
[tex]k = \frac{10\ N}{0.04\ m}\\k = 250\ N/m\\[/tex]
Now, the equivalent resistance of two springs connected in parallel, as shown in the diagram, will be:
[tex]k_{eq} = k + k\\k_{eq} = 2k = 2(250\ N/m)\\k_{eq} = 500\ N/m\\[/tex]
For a load of 30 N, applying Hooke's Law:
[tex]\Delta x = \frac{F}{k_{eq}}\\\\\Delta x = \frac{30\ N}{500\ N/m}\\\\\Delta x = 0.06\ m = 6\ cm\\[/tex]
Hence, the correct option is:
B. 6 cm
please help me please please help me please please
Answer:
3a) k = 500 N/m
3b) x = 0.05 m
3c) F = 2.5 N
4a) W = 120 N
4b) W = 5 N
4c) W = 0.2 N
Explanation:
3a) Force; F = 10 N.
Extension; x = 20 mm = 0.02 m
Formula for spring constant is;
K = F/x = 10/0.02
k = 500 N/m
3b) Force is now; F = 25 N
Since k = 500 N/m
Then x = F/k = 25/500
x = 0.05 m
3c) extension is now 5 mm = 0.005 m
Thus; F = kx = 500 × 0.005
F = 2.5 N
4a) Formula for weight is;
W = mg.
g = 10 N/kg
m = 12 kg
Thus; W = 12 × 10
W = 120 N
4b) Mass; m = 500 g = 0.5 kg
Thus; W = 0.5 × 10
W = 5 N
4c) mass; m = 20 g = 0.02 kg
W = 0.02 × 10
W = 0.2 N
the far point of a miopic person is 80cm in front of eye.what is the nature and power of the lens required to correct the problem
Answer:
Part A
The nature of the lens required is a concave lens
Part B
The power of the lens required is -1.25 D
Explanation:
Part A
Myopia is the eye condition whereby the focus of light entering the eye is in front of the retina such that the vision of a myopic person is blurred
The given far point of the myopic person in question = 80 cm
To correct the problem, the focus of light entering the eye will be moved further to reach the retina, by means of a concave lens which makes distant objects appear to come from (form an image at) 80 cm
Part B
The lens formula is given as follows;
[tex]\dfrac{1}{f} = \dfrac{1}{d_o} + \dfrac{1}{d_i}[/tex]
Where;
f = The focus of the lens (virtual focus)
[tex]d_o[/tex] = The distance of the object = ∞ (infinity)
[tex]d_i[/tex] = The distance of the image = -80 cm (virtual image formed in front of the mirror)
Plugging in the values, gives;
[tex]\dfrac{1}{f} = \dfrac{1}{\infty} + \dfrac{1}{-80 \, cm} = \dfrac{1}{-80 \, cm}[/tex]
[tex]\therefore \dfrac{1}{f} = \dfrac{1}{-80 \, cm}[/tex]
f = -80 cm = -0.8 m
The power of a lens, 'P' is the reciprocal of the focal length, 'f', given in meters
[tex]P = \dfrac{1}{f (in \, meters)}[/tex]
The SI unit for the power of a lens is the dioptre (D)
Therefore;
[tex]P = \dfrac{1}{-0.80 \, m} = -1.25 \, D[/tex]
Therefore, the power of the lens required, P = -1.25 D.
URGENT HELP NEEDED PLEASE!
A clay ball (mass = 0.25kg) has a rightward momentum of +1.75 kg∙m/s. A second clay ball (mass = 0.25 kg) has a leftward momentum of -1.75 kg∙m/s. The two collide, stick together, and come to a complete stop after the collision.
a) What was the total energy of the system before the collision?
b) What was the total energy of the system after the collision?
Answer:
the total energy before collision is 12.25J
the total energy after collision is tranfered to sound and heat (by the friction between the two clay balls)
Explanation:
first we should know the velocity of the 2 balls:
momentum=mass ×velocity
we have the momentum and the mass of the 2
so momentum ÷mass=velocity
clay ball 1 velocity=7 m/s & clay ball 2 velocity= -7 m/s
KE=1/2 mv²
1/2 ×0.25×7²=6.125J KE of ball 1
1/2 ×0.25×-7²=6.125J KE of ball 2
add them both we will have 12.25J which is before collision
this energy will then be tranfered to heat and sound as they stop after the collision(velocity =0m/s)
We observe a glowing cloud of gas in space with a spectroscope. We note that many of the familiar lines of hydrogen that we know on Earth seem to be in a different place. They are shifted toward the blue or violet end of the spectrum compared to their positions in the spectrum of glowing hydrogen gas on Earth. From this we can conclude that: Group of answer choices the cloud is moving away from us the cloud is much hotter than hydrogen on Earth the cloud is moving toward us No information can be concluded from this observation alone the cloud is much cooler than hydrogen on Earth
Answer:
No information can be concluded from this observation alone the cloud is much cooler than hydrogen on Earth
Scientists classify stars by color: white, red, blue. The color of a star helps to tells us how
______ The star is.
Answer: Hot
Explanation: Scientist use the color of starts to determine how hot the surface temperature is.
How do you find component velocities of parallel vectors?
Answer:
Velocity is a vector (it has magnitude and direction), so the overall velocity of an object can be found with vector addition of the x and y components: v2 = vx2 + vy2. The units to express the horizontal and vertical distances are meters (m).
Is there any alternative method to find the intensity of earthquake
Answer:
Hey mate....
Explanation:
This is ur answer.....
Another way to measure the strength of an earthquake is to use the Mercalli scale. Invented by Giuseppe Mercalli in 1902, this scale uses the observations of the people who experienced the earthquake to estimate its intensity.
Hope it helps you,
Mark me as the brainliest....
Follow me!!! :)
Define atmospheric pressure
Answer:
tmospheric pressure, force per unit area exerted by an atmospheric column (the entire body of air above the specified area)
Which equation describes the line containing the points (-2, 3) and (1, 2)
Answer:
[tex]y = \frac{ - 1}{3}x + \frac{7}{3} [/tex]
Explanation:
[tex] \frac{y - 3}{2 - 3} = \frac{x + 2}{1 + 2} \\ \ - y + 3 = \frac{x + 2}{3} \\ y = \frac{ - 1}{3}x + \frac{7}{3} [/tex]
¿Qué función trigonométrica describe la manera como el voltaje y la corriente varían con el tiempo en un circuito CA?
Answer:
función sinusoidal
Explanation:
En un circuito de CA, la corriente y el voltaje tienen un voltaje máximo y mínimo. A intervalos regulares, la corriente y el voltaje invierten la dirección y cambian su magnitud continuamente con el tiempo.
Por lo tanto, para representar la corriente y el voltaje en un circuito de CA, se utiliza una función sinusoidal. Una función seno es una función continua con oscilaciones periódicas.
Compare and contrast O2 and F2.
Answer:
1) Similarity:
1. diatomic molecules.
2. nonpolar covalent bond.
3. gaseus state at room temperature.
4. very reactive, with high electronegativity.
A series of four different cylinders were each subjected to a force by placing four different masses on top of them. The mass placed on each cylinder
and dimensions of each cylinder are shown below. Rank the stress on these cylinders from least to greatest.
Mass (kg) Diameter (cm) Height (cm)
Case
A
B
С
D
5.2
3.6
4.7
2.9
2.6
2.3
2.7
32.2
32.5
27.3
16.9
Answer:
C, B, D, A
Explanation:
Stress is F/A, where F = 9.8*mass and A = pi(d/2)^2
Do the math for each and the stress from least to greatest is C, B, D, A.
The height column is unnecessary information.
When four different cylinders(A,B,C,D) were each subjected to a force by placing four different masses on top of them. the Rank of stress on these cylinders from least to greatest is D, C, B, A.
What is Stress ?Stress is defined as applied force(F) per unit cross sectional area(A) on which force is applied. it I.e. Stress = F/A. its SI unit is N/m². More force on small area leads to higher stress.
Given,
For A
Mass m = 5.2 kg
Diameter = 2.6 cm
Radius r = 1.3 cm = 0.013 m
Height = 32.5
Stress on A = Force ÷ A = mg ÷ πr²
Stress = (5.2×9.8) ÷ (3.14×0.013²)
Stress = 96031 N/m²
For B
Mass m = 3.6 kg
Diameter = 2.3 cm
Radius r = 1.15 cm = 0.011 m
Height = 27.3
Stress on B = Force ÷ A = mg ÷ πr²
Stress = (3.6 ×9.8) ÷ (3.14×0.011 ²)
Stress = 92856 N/m²
C
Mass m = 4.7 kg
Diameter = 2.7 cm
Radius r = 1.35 cm = 0.0135 m
Height = 16.9
Stress on C= Force ÷ A = mg ÷ πr²
Stress = (4.7 ×9.8) ÷ (3.14×0.0135²)
Stress = 80487 N/m²
D
Mass m = 2.9 kg
Diameter = 32.2 cm
Radius r = 16.1 cm = 0.16 m
Stress on D = Force ÷ A = mg ÷ πr²
Stress = (2.9×9.8) ÷ (3.14×0.16²)
Stress = 353 N/m²
Hence Rank of stresses on the 4 cylinders are D, C, B, A
To know more about Stress, click :
https://brainly.com/question/25632718
#SPJ2
I will give brainliest to whoever answers this in less than 10 minutes.
Answer:
D) No, because of the way work is defined
Explanation:
There is no motion in the direction of the force, then no work is done by that force. ... But the work done on the box is zero since by moving in a straight line at constant speed, its energy is remaining the same.
Hope it helps
Please mark me as the brainliest
Thank you
You push a 22.0 kg box along a rough floor at a constant velocity. The coefficient of kinetic friction between the box and the floor is 0.45. You then release the box and it slows to a stop.
a) For the time where you are pushing the box, draw a free body diagram of the box and calculate the value of each force as you can on your free body diagram.
b) For the time where you have released the box, draw an FBD of the box. Determine the value of the forces on the FBD and determine the unbalanced force.
c) What will the acceleration of the box be when it is released and slowing to a stop?
Which of the following statements is true?
A. An object with stored energy cannot have mechanical energy.
В.An object with mechanical energy is always able to perform work.
C. An object with potential energy is always in motion.
D An object with kinetic energy is always positioned above the ground.
Answer:
В. An object with mechanical energy is always able to perform work.
Explanation:
Energy can be defined as the ability (capacity) to do work. The two (2) main types of energy are;
a. Gravitational potential energy (GPE): it is an energy possessed by an object or body due to its position above the earth.
b. Kinetic energy (KE): it is an energy possessed by an object or body due to its motion.
Furthermore, the mechanical energy of a physical object or body is the sum of the potential energy and kinetic energy possessed by the object or body and it is measured in Joules.
Mathematically, it is given by the formula;
Mechanical energy = G.P.E + K.E
Hence, the true statement is that an object with mechanical energy is always able to perform work.
Answer:
B
Explanation:
Answer:
В. An object with mechanical energy is always able to perform work.
Explanation:
Energy can be defined as the ability (capacity) to do work. The two (2) main types of energy are;
a. Gravitational potential energy (GPE): it is an energy possessed by an object or body due to its position above the earth.
b. Kinetic energy (KE): it is an energy possessed by an object or body due to its motion.
Furthermore, the mechanical energy of a physical object or body is the sum of the potential energy and kinetic energy possessed by the object or body and it is measured in Joules.
Mathematically, it is given by the formula;
Mechanical energy = G.P.E + K.E
Hence, the true statement is that an object with mechanical energy is always able to perform work.
Could someone please help me..?
The effect an electric charge has on other charges in the space around it is the charge's:
friction
electric current
electric field
induction