Please answer the correct question and I will give you 50 points
1) Consider a ring, sphere and solid cyclinder all with the same mass. They are all held at the top of an inclined plane which is at 20° to the horizontal. The top of the inclined plane is 1 m high. The shapes are released simultaneously and allowed to roll down the inclined plane. Assume the objects roll without slipping and that they are all made from the same material. Assume the coefficient of static friction between the objects and plane to be 0.3.
A ) calculate the tangential (linear) Velocity of each shapes-
B) determine the linear acceleration(a)
C) which shapes have the greater moment of inertia ?
D) How long will it take each shape to reach the bottom of the Slope ?

E) workout what order they would get to the bottom of the Slope.


​

Answer:

Approximately [tex]5.94\; {\rm N}[/tex].

Explanation:

The gravitational force between two objects of uniform mass is:

[tex]\displaystyle F = \frac{k\, M\, m}{r^{2}}[/tex],

Where:

Rearrange this equation to find [tex]r[/tex]:

[tex]\begin{aligned} r &= \sqrt{\frac{k\, M\, m}{F}} \\ &= \sqrt{\frac{(6.67 \times 10^{-11})\, (75.0)\, (60.0)}{8.50 \times 10^{-9}}}\; {\rm kg} \\ &\approx 5.94\; {\rm kg}\end{aligned}[/tex].

It takes source B 40 s to complete two half lives.

The half-life of a chemical is the amount of time it takes for half of the atoms in a sample to decay. This concept is widely used to describe how quickly a substance decays radioactively in nuclear physics and radiochemistry. Each radioactive substance has a unique half-life due to the properties of each atomic nucleus.

Looking at the graph, we can see that the half life of the source B is 20s .

Hence the time taken to complete two half lives = 2(20 s) =  40 s.

Learn more about half life:https://brainly.com/question/24710827

#SPJ1

Answer:

Explanation:

B.  W = mg     m = W/g = (650 N)/(9.8 m/s²) = 66.33 kg

C.  Ff = μN = (0.12)(650 N) = 78 N

D.  F > 78 N

Note:  Brainly doesn't provide drawing tools, so I can't help you with the FBD.  But here's a try at it: N = normal force, F = applied force, W = weight of person + sled, Ff = force of friction,  ⊕ (person and the sled)

       N

       ↑

Ff←   ⊕  →F

       ↓

      W

In the 1600s, a scientist by the name of Robert Boyle made the first known demonstration of the fact that a sound cannot pass through void space. Boyle placed the clock in a glass jar with a tight lid.

Pump out the air from the sealed bell jar while putting an electrical bell inside. Set the electric bell to ringing. We cannot hear the sound that the bell makes with our ears. This indicates that sound waves require a material environment for propagation because they cannot move through a vacuum.

Since sound waves are carried from one location to another by the molecules of solids, liquids, and gases, sound requires a physical medium for propagation, such as a solid, liquid, or gas. Since there are no molecules in the vacuum that can vibrate and convey sound waves, sound cannot travel through it.

To know more about electric visit :

https://brainly.com/question/8971780

#SPJ1

a) The power of the electric golf cart is approximately 1.674 horsepower.

b) The force exerted by the electric golf cart is approximately 2182.5 Newtons.

(a) To convert 1.25 kW to horsepower, we can use the conversion factor:

1 horsepower = 0.746 kW

So, 1.25 kW = (1.25/0.746) horsepower = 1.674 horsepower (approximately)

Therefore, the power of the electric golf cart is approximately 1.674 horsepower.

(b) To calculate the force exerted by the cart, we can use the following formula:

force = power / velocity

where power is in watts, velocity is in meters per second, and force is in Newtons.

First, we need to convert the power of the cart from 1.25 kW to watts:

1 kW = 1000 watts

So, 1.25 kW = 1250 watts

Now, we need to convert the distance traveled by the cart from meters to kilometers, and the time taken from seconds to hours:

200 m = 0.2 km

35.0% = 0.35 hours

Using the formula, we can calculate the force exerted by the cart as:

force = power / velocity

force = 1250 / (0.2/0.35)

force = 1250 / 0.5714

force = 2182.5 N (approximately)

Therefore, the force exerted by the electric golf cart is approximately 2182.5 Newtons.

Learn more on force here https://brainly.com/question/12970081

#SPJ1

Answer:

Explanation:

To find the relative velocity of two cars moving in different directions, we need to subtract their velocities. In this case, one car is moving with a velocity of 70 km/hr and the other car is moving with a velocity in the west direction.

Let's assume that the velocity of the second car is also 70 km/hr. Since the car is moving in the west direction, we can represent its velocity as -70 km/hr (negative sign indicates motion in the opposite direction).

Now, we can find the relative velocity of the second car with respect to the first car by subtracting the velocity of the first car from the velocity of the second car:

Relative velocity = Velocity of the second car - Velocity of the first car

= (-70 km/hr) - (70 km/hr)

= -140 km/hr

Therefore, the relative velocity of the second car with respect to the first car is -140 km/hr, which means that the two cars are moving away from each other at a speed of 140 km/hr.

PLS MARK ME BRAINLIEST

The true statements regarding VDGS Systems are you must power on and check the system before arrival and a qualified agent must man the Emergency stop.

VDGS stands for Visual Docking Guidance System. It is a technology used in airports to assist pilots in parking their aircraft at the gate by providing visual cues and guidance through the use of lights and/or displays.

The following statements regarding VDGS Systems are true:

Learn more on VDGS here https://brainly.com/question/26507705

#SPJ1

Answer:

a = 0.724 m/s2

Explanation:

Known:

m = 650 kg

F = 897 N

a = ?

Use this formula:

F = ma

a = F/m

a = 650/897

a = 0.724 m/s2

Radar; atomic & molecular research, microwave ovens, cell phones are possible because of microwaves.

Microwave is described as a form of electromagnetic radiation with wavelengths ranging from about one meter to one millimeter corresponding to frequencies between 300 MHz and 300 GHz respectively.

In conclusion, Microwave radiation has its effects as it can heat the body tissue the same way it heats food. Uneccessary exposure to high levels of microwaves can cause a painful burn.

Learn more about microwaves at: https://brainly.com/question/13085297

#SPJ1

Answer: 3.99•10⁴ J

Explanation:

The Heat Formula is: Q = m • C • ΔT

Your given C, m, T₀, and T

C = 0.385 J/g•K

m = 1.55 kg or 1,550 g

T₀ = 33.0 °C

T = 99.9 °C

(ΔT = T - T₀)

Your only remaining variable is Q, heat, so you can now plug in your values to solve.

Q = (1550)(0.385)(99.9 - 33.0)

(ΔT(°C) = ΔT(K) because the conversion is linear)

Q = 39,922.575 J

or

3.99•10⁴ J

The current would decrease if one light bulb is removed from the circuit. Option B is correct.

If one light bulb is removed from a simple circuit with two identical light bulbs that are in series with one another, the total resistance in the circuit would increase. This is because the resistance of the circuit is proportional to the number of resistors in the circuit, and removing one bulb reduces the number of resistors in the circuit.

The total current in the circuit would decrease because the resistance has increased. This is because the current flowing through a circuit is inversely proportional to the resistance of the circuit according to Ohm's law. Option B is correct.

To know more about the Circuit, here

https://brainly.com/question/29098982

#SPJ1

Answer: boiling point is when the object of a liquid is hot enough to start to boil and create bubbles, and even start to evaporate into gas.

Explanation:

The work done by the muscle in stretching the Achilles tendon is 20.04 joules.

To calculate the work done by the muscle in stretching the Achilles tendon, we can use the formula:

Work = Force × Distance

We know that the force exerted on the tendon by the muscle increased from 3230 N to 4787 N, causing the tendon to stretch by 0.500 cm.

converting the distance from centimeters to meters:

Distance = 0.500 cm = 0.005 m

Now we can calculate the work done by the muscle:

Work = Force × Distance

Work = (4787 N + 3230 N)/2 × 0.005 m

Work = 4008.5 N × 0.005 m

Work = 20.04 J

Therefore, the work done by the muscle in stretching the Achilles tendon is 20.04 joules.

For more such questions on work done, click on:

https://brainly.com/question/25573309

#SPJ11

Answer:

F = 5.2324 x 10⁻⁸ N

Explanation:

F = G(m₁ · m₂) / r²

where F is the gravitational force, G is the gravitational constant (6.674 x 10⁻¹¹ N·m²/kg²), m1 and m2 are the masses of the two objects, and r is the distance between them.

Plugging in the given values m1 = m2 = 70.0 kg, r = 2.5 m:

F = (6.674 x 10⁻¹¹)(70.0 kg)² / (2.50 m)²

F = 5.2324 x 10⁻⁸ N

Therefore, the gravitational force between the two 70.0 kg masses separated by 2.50 m is approximately 5.2324 x 10⁻⁸ N.

The acceleration of the racing camel is 1.38 m/s².

From Newton's second law, force is expressed as;

F = m × a

Where is mass of object and a is the acceleration

Given that:

To determine the acceleration of the camel, pug the given values into the abovr formula and solve for a.

F = m × a

897N = 650 kg × a

Note that: Newton N is the same as kg·m/s²

Hence;

897kg·m/s² = 650 kg × a

Divide both sides by 650 kg

a = (897kg·m/s²) / (650 kg)

a = 1.38 m/s²

Therefore, the acceleration is 1.38 meters per second sqaure.

Learn more about force here: https://brainly.com/question/11737731

#SPJ1

Answer:60 seconds

Explanation: Since we have the boy's initial location si (0m), final location sf (600m) and his velocity v, we can have our position equation like so:

sf = si + vt
600 = 0 + 10t

Solve for t by dividing 600 by 10 and your time t = 60s

The best description of the image is (B) upright, smaller, and virtual is correct option.

To determine the characteristics of the image, we can use the thin lens equation:

1/f = 1/do + 1/di

where f is the focal length of the lens, do is the object distance (distance of the object from the lens), and di is the image distance (distance of the image from the lens).

We can also use the magnification equation:

m = -di/do

where m is the magnification.

First, we need to determine the focal length of the lens. We can use the fact that the lens is centered over the 14 cm ruler at the 7 cm mark, which means the lens is 7 cm from both the left and right sides of the ruler. Since the ruler has a total length of 14 cm, the lens must be in the middle, and the distance from the lens to the ruler is 7 cm. Therefore, the lens has a focal length of 7 cm.

Next, we can use the thin lens equation to find the image distance for the arrow located at the 6 cm mark:

1/7 = 1/(6 - 7) + 1/di

di = -7 cm

The negative sign indicates that the image is inverted.

We can also use the magnification equation to find the magnification of the image:

m = -di/do = -(-7)/(-6) = 7/6

The positive magnification indicates that the image is upright.

Finally, we can use the image distance and magnification to determine the characteristics of the image. Since the image distance is negative, the image is virtual. Since the magnification is less than 1, the image is smaller.

Therefore, the best description of the image is upright, smaller, and virtual.

To know more about image

https://brainly.com/question/12494813

#SPJ1

Answer:

upright, smaller virtual

Explanation:

Answer:

a) The order in which the shapes reach the bottom of the slope will be the sphere, solid cylinder, and ring.

b) The time it takes for each shape to reach the bottom of the slope can be calculated using the following equation:

t = (2d / g)^(1/2)

Where t is the time, d is the height of the inclined plane (1m in this case), and g is the acceleration due to gravity (9.8 m/s^2).

For the sphere:

t = (2 x 1 / 9.8)^(1/2) = 0.45 seconds

For the solid cylinder:

t = (2 x 1 / 9.8)^(1/2) x (5/7) = 0.36 seconds

For the ring:

t = (2 x 1 / 9.8)^(1/2) x (2/5) = 0.28 seconds

c) The moment of inertia depends on the shape of the object and how the mass is distributed around its axis of rotation. For a solid sphere, the moment of inertia is given by I = (2/5)MR^2, for a solid cylinder it is I = (1/2)MR^2, and for a ring it is I = MR^2. Therefore, the order of increasing moment of inertia is the ring, the solid cylinder, and the sphere.

d) The linear acceleration of each shape can be calculated using the following equation:

a = gsinθ / (1 + I / MR^2)

Where a is the linear acceleration, g is the acceleration due to gravity (9.8 m/s^2), θ is the angle of the inclined plane (20° in this case), I is the moment of inertia, M is the mass, and R is the radius.

For the sphere:

a = (9.8 x sin20) / (1 + (2/5)) = 2.34 m/s^2

For the solid cylinder:

a = (9.8 x sin20) / (1 + (1/2)) = 3.29 m/s^2

For the ring:

a = (9.8 x sin20) / (1 + 1) = 4.16 m/s^2

e) The tangential (linear) velocity of each shape at the bottom of the slope can be calculated using the following equation:

v = ωR

Where v is the tangential velocity, ω is the angular velocity, and R is the radius.

The angular velocity can be calculated using the following equation:

ω = (2a / R)^(1/2)

For the sphere:

ω = (2 x 2.34 / 0.05)^(1/2) = 21.8 rad/s

v = 21.8 x 0.05 = 1.09 m/s

For the solid cylinder:

ω = (2 x 3.29 / 0.05)^(1/2) = 30.7 rad/s

v = 30.7 x 0.05 = 1.53 m/s

For the ring:

ω = (2 x 4.16 / 0.05)^(1/2) = 36.4 rad/s

v = 36.4 x 0.05 = 1.82 m/s

mark me brilliant

Answer:

c

Explanation:

To determine the elemental composition of the faraway galaxy, would use spectroscopy to analyze the light that is emitted or absorbed by the galaxy. This technique enables me to determine the types of atoms and molecules that are present in the galaxy, providing insights into its elemental composition.

To determine the galaxy's motion relative to the Milky Way, would use the Doppler effect to measure the galaxy's redshift or blueshift. This would enable me to determine whether the galaxy is moving away from or towards us, and at what speed, providing information about its motion relative to our galaxy.

It could also look for any gravitational lensing effects, which could indicate the presence of massive objects that are influencing the galaxy's motion.

To know more about galaxy

https://brainly.com/question/24921394

#SPJ1

Answer:

Explanation:

que ricos puntitos

Answer:

The physical quantities are the quantities that are the base quantities of the measurement. They are known as the fundamental quantities. The units of those units are known as the fundamental units. The derived physical quantities are dependent on the fundamental quantities.

As the pendulum swings from position A to position B, the potential energy decreases while the kinetic energy increases. According to the law of conservation of energy, the total energy in a system remains constant, neglecting friction. Therefore, the potential energy lost by the pendulum is converted into kinetic energy. The correct relationship of kinetic energy to potential energy as the pendulum swings from position A to position B is:

The potential energy decrease is equal to the kinetic energy increase.

So, the answer is option B.

Answer:

The potential energy increase is equal to the kinetic energy decrease.

Sonography uses infrasonic waves to create images of objects found inside other objects.-False

Sonography, commonly known as ultrasound imaging, creates pictures of structures and organs inside the body using high-frequency sound waves (rather than infrared rays). These sound waves are emitted by a transducer, a portable device put on the skin and deliver sound waves through the body. The waves reverberate off internal organs and structures and are picked up by the transducer, which generates a visual representation on a computer screen. Ultrasonic imaging is widely used in obstetrics to monitor fetal development and in other medical specialties to diagnose and treat various disorders.

To learn about Sonography

https://brainly.com/question/30225909

Robert Boyle demonstrated that sound needs a medium through which to travel by observing that an alarm watch in a vacuum did not make a sound. Option 1 is the answer.

Sound is a form of energy that results from the vibration of matter. When an object vibrates, it creates sound waves that travel through a medium and can be perceived by the human ear.

A medium is a substance or material through which waves can travel. In the case of sound, air, water, and solids such as metal or wood can serve as a medium. Without a medium, sound cannot propagate because there are no molecules to vibrate and transmit the waves.

Robert Boyle demonstrated that sound needs a medium through which to travel by observing that an alarm watch in a vacuum did not make a sound. This led him to conclude that sound requires a medium, such as air or water, to propagate.

Learn more on sound here https://brainly.com/question/9349349

#SPJ1

Answer:

Not likely

Explanation:

She might feel a slight shock if she touches a plastic door handle after walking across a carpet, but not nearly as much as when she touches a metal handle. This is because plastic is an insulator, which means it does not conduct electricity very well. Metal is an excellent conductor. When the student drags her feet across a carpet, she builds up a negative electric charge on her body. Free electrons are released from the carpet due to friction between the carpet and her shoes, and the electrons collect on the surface of her body.  If she touches a metal object like a door handle, the electrons flow from her body to the metal, resulting in a static discharge--a shock. However, if she touches a plastic object, the charge will not flow as easily and she is less likely to feel a shock.  The electrons on her body repel the electrons in the metal door knob, leaving the surface of the metal doorknob positively charged, so the electrons jump across a short air gap to the metal door and she feels an electrical shock.  This won't happen so dramatically with a plastic handle because the electrons in plastic won't be as easily repelled as in a metal handle.

Answer:

1.53 N

Explanation:

The force required to stretch a spring is given by Hooke's law: F = k*x, where F is the force, k is the spring constant, and x is the displacement from the equilibrium position.

In this problem, we are given the mass and the displacement of the spring, but we need to find the spring constant before we can calculate the force.

The spring constant can be found using the equation k = F/x, where F is the force required to stretch the spring and x is the corresponding displacement.

Given that the 102 g mass stretches the spring by 4.0 cm, we have:

k = F/x = (mg)/x = (0.102 kg)(9.8 m/s^2)/(0.04 m) = 25.5 N/m

where g is the acceleration due to gravity.

Now, to calculate the force required to stretch the spring by 6.0 cm, we use the same equation with the new displacement:

F = kx = (25.5 N/m)(0.06 m) = 1.53 N

Therefore, the force required to stretch the spring by 6.0 cm is 1.53 N.

According to the given information, regardless of the orientation settings, the two detectors will flash different colors with probability . This prediction is based on quantum mechanics.

In the experiment described, a pair of atoms are produced from a central source and detected by two detectors that are separated by a distance of nearly seven miles.

Each detector has the possibility of being oriented as A, B, or C, and is mounted with two colored lamps, a red lamp, and a green lamp.

According to the predictions of quantum mechanics, if the orientation settings of the two detectors are the same, then the two detectors always flash different colors.

Learn more about detector on

https://brainly.com/question/29569820

#SPJ1