The water with the salt boiled at a higher temperature than the water without the salt.
What is elevation in boiling point?When we add any solute or other compound in any pure solvent then the boiling point of the solution will increases.
And elevation in boiling point will be expressed by the following equation:
ΔTb = (Kb)(m)(i), where
Kb = molal boiling point constantm = molalityi = Van't hoff factorSo the pot with salt will have higher boiling point then the simple water.
Hence, pot with salt has a higher boiling point.
To know more about elevation in boiling point, visit the below link:
https://brainly.com/question/22565279
#SPJ1
How can glass be a liquid if it's so hard?
Answer: below
Explanation:
Glass can be heated up and turn into a liquid, its a hard procces, due to the extreme heat, machines are used today.
Answer:
answer
[tex]\huge\tt{\underline{\colorbox{maroon}{✨ANSWER}}}[/tex]
Explanation:
Because glass is hard, it must be a supercooled liquid. Glass, however, is actually neither a liquid—supercooled or otherwise—nor a solid. It is an amorphous solid—a state somewhere between those two states of matter
Na-23 has 11 protons.How many neutrons does it have?
this is how you find it:
23-11=12
the 12 is the amount of neutrons
Hii!
Explain Rutherford's model.
Answer:
Rutherford's model shows that an atom is mostly empty space, with electrons orbiting a fixed, positively charged nucleus in set, predictable paths. This model of an atom was developed by Ernest Rutherford, a New Zealand native working at the University of Manchester in England in the early 1900s
Explanation:
yan na ang exact
Rutherford's atomic model is the model which described the atom as a tiny, dense, positively charged core called a nucleus, in which nearly all the mass is concentrated, around which the light, negative constituents, called electrons, circulate at some distance, much like planets revolving around the Sun.
Calculate the pH of the following solutions at 298 K.
a) 0.25 mol dm-3 HCl.
b) 0.15 mol dm-3 H2SO4.
c) 0.15 mol dm-3 benzoic acid. Ka(benzoic acid) = 6.4 x 10-5 mol dm-3.
d) 0.10 mol dm-3 KOH. Kw(298 K) = 1.0 x 10-14 mol2 dm-6.
The term pH has to do with the hydrogen ion concentration of a solution.
What is pH?The term pH has to do with the hydrogen ion concentration of a solution. Let us now proceed the pH of the solutions;
a) pH of HCl = -log(0.25) = 0.62
b) pH of H2SO4 = -log(0.15) = 0.82
c) We have to set up an ICE table here;
C6H5COOH + H2O ⇄ C6H5COO- + H^+
I 0.15 0 0
C -x +x +x
E 0.15 -x x x
Ka = [C6H5COO-] [ H^+]/[C6H5COOH]
6.4 x 10^-5 = x^2/0.15 - x
6.4 x 10^-5(0.15 - x) = x^2
9.6 * 10^-6 - 6.4 x 10^-5x = x^2
x^2 + 6.4 x 10^-5x - 9.6 * 10^-6 = 0
x=0.003 M
Hence;
[C6H5COO-] = [ H^+] = x = 0.003 M
pH = - log[0.003 M] = 2.5
d) [OH-] [H^+] = 1.0 x 10-14 mol2 dm-6
[H^+] = 1.0 x 10-14 mol2 dm-6/ 0.10 mol dm-3
[H^+] = 1 * 10^-13 M
pH= - log[1 * 10^-13 M] = 13
Learn more about pH of a solution:https://brainly.com/question/15289741
#SPJ1
When will the pain end?
Answer:
(when you get a girl)
Pain is a sensory trigger from your brain to represent the fact that something —or someone— could be hurting you. The pain will end once the thing causing it stops, as in a cause-effect scenario.
Mental health though, can be helped by finding happiness in life, like getting off of clash of clans and touching grass.
___Cu2S (s) + ___O2 (g) → ___Cu (s) + ___SO2 (g)
A. Balance the chemical equation above.
B.hat type of reaction is/are being represented by the chemical reaction in part (a)?
Answer:
(a)Cu2S(s) + O2(g) --> 2Cu(s) + SO2(g)
(b) single displacement reaction
The energy diagram shows the changes in energy during a chemical reaction.
Which statement best describes the total energy change of the system?
Potential energy
M
Reaction progress
O A. The reactants have higher potential energy, and energy is released.
O B. The reactants have lower potential energy, and energy is released.
O C. The reactants have lower potential energy, and energy is
absorbed.
O D. The reactants have higher potential energy, and energy is
absorbed.
There is no diagram attached but there are some ways by which you can find it too easily by yourself
Usually energy diagram uses ∆H .
So
If ∆H is +ve means reaction is exothermic and energy is releasedIf ∆H is -ve means reaction is endothermic and energy is absorbedSo observe∆H whether it. is decreasing or increasing ,
If increasing then energy is being released and vice versaare sedimentary rocks formed weathering erosion and deposition?
Answer:
yes
Explanation:
sedimentary rocks are mad from erosion and weathering!
weathering erosion and deposition occur to form every sedimentary rock that exist on Earth weathering is the creation of sediment through its supposed to wind or water tearing off pieces or do I survive a logical activity such as tree roots and animal hooves breaking at rock erosion is the transportation of the sediments from origin to deposition through wind water or glacial ice deposition is the process of the sediments being dropped off by their mode of movement or erosion method by glacial ice when are water.
A mixture of hydrogen (2.02 g) and chlorine (35.90 g) in a container at 300 K has a total gas pressure of 748 mm Hg. What is the partial atmospheric pressure (atm) of hydrogen in the mixture?
The partial atmospheric pressure (atm) of hydrogen in the mixture is 0.59 atm.
How do we calculate the partial pressure of gas?Partial pressure of particular gas will be calculated as:
p = nP, where
P = total pressure = 748 mmHgn is the mole fraction which can be calculated as:n = moles of gas / total moles of gasMoles will be calculated as:
n = W/M, whereW = given massM = molar massMoles of Hydrogen gas = 2.02g / 2.014g/mol = 1 mole
Moles of Chlorine gas = 35.90g / 70.9g/mol = 0.5 mole
Mole fraction of hydrogen = 1 / (1+0.5) = 0.6
Partial pressure of hydrogen = (0.6)(748) = 448.8 mmHg = 0.59 atm
Hence, required partial atmospheric pressure of hydrogen is 0.59 atm.
To know more about partial pressure, visit the below link:
https://brainly.com/question/15302032
#SPJ1
What is the equivalent weight of water
Answer:
Atomic weight of Hydrogen is 1. There are 2 Hydrogen atoms in water molecule. So it is 2. Oxygen atomic weight is 16.0 and adding 2 and 16, we will get 18.18 is the equivalent weight of water.
Explanation:
Hope this helps
13 a plant will start to wilt/sprout without sunlight
Answer:
wilt
Explanation:
Without sunlight, photosynthesis cannot occur, and photosynthesis makes chlorophyll, the plant's food. Therefore, a plant without sunlight will "starve," and begin wilting.
Answer:
it will true
Explanation:
The concentration of a solution refers to the amount of solute that has been dissolved in a given amount of solute. consider the solution seen. here select all the ways that this solution could be made more concentrated.
A.) increase the amount of solute
B.) decrease the amount of solute
C.) decrease the amount of solvent
D.) increase the amounts of solute and solvent
6.45g of lithium reacts with 9.2g of oxygen gas to produce lithium oxide.How many grams of Li20 are formed? Hint: write the balanced chemical equation first.
when water becomes tasty it is called?
Answer:
sour ??
Explanation:
Look at the equation. Which is the Brønsted-Lowry base?
Answer:
the answer is H3O+.......
Answer:
H₂O
Explanation:
A Brønsted-Lowry base accepts protons. As seen in the equation, H₂O gains a proton to become H₃O⁺. It has gained one proton- a hydrogen atom.
C₂H₃O₂⁻ is a conjugate base.
H₃O⁺ is a conjugate acid.
HC₂H₃O₂ is an acid [or a Brønsted-Lowry acid].
A buffer solution made from a generic acid (HA with Ka =4.82 x 10-5 )is 0.110 M in HA and 0.110 M in NaA. How many moles of NaOH can 200 mL of this buffer neutralize before the pH rises by 0.50?
0.634 mol of NaOH can 200 mL of this buffer neutralize before the pH rises by 0.50.
What is a buffer solution?A buffer is a solution that can resist pH change upon the addition of an acidic or basic components.
Solution:
A buffer consists of 0.11 M HA and 0.11 M NaA.
Ka =[tex]4.82 X 10^-^5[/tex]
pKa = -log ([tex]4.82 X 10^-^5[/tex])
pKa = 11.83
Using Henderson equation to calculate pH of the buffer solution.
pH =PKa -log [tex]\frac{Conjugate \;base}{Acid}[/tex]
pH = 11.83 - [tex]\frac{0.11 M}{0.11 M}[/tex]
pH = 10.83
pOH = 14 - 10.83
pOH = 3.17
Calculating the moles of NaOH added by the addition of 200 mL
Molarity = [tex]\frac{Moles \;of \;NaOH}{0.2 L}[/tex]
3.17 X 0.2 = Moles of NaOH
Moles of NaOH = 0.634 mol
Hence, 0.634 mol of NaOH can 200 mL of this buffer neutralize.
Learn more about the buffer solution here:
https://brainly.com/question/17095772
#SPJ1
A sample of carbon monoxide gas is contained in a 345 mL vessel at a temperature of 25 °C. and a pressure of 985 mm
Hg. The gas is allowed to expand to a new volume of 4.50 liters at constant temperature. What is the new pressure? 1 atm
= 760 mm Hg.
The new pressure is 75.51 mmHg if a sample of carbon monoxide gas is contained in a 345 mL vessel at a temperature of 25 °C. and a pressure of 985 mmHg and the gas is allowed to expand to a new volume of 4.50 litres at a constant temperature.
What is a gas law?The gas laws consist of three primary laws: Charles' Law, Boyle's Law and Avogadro's Law (all of which will later combine into the General Gas Equation and Ideal Gas Law).
The pressure on the gas changes, while the temperature remains constant, and we want to find the new volume. So, we will use Boyle's Law, which states there is an inverse relationship between the pressure on a gas and the volume of the gas. The formula is:
[tex]P_1V_1=P_2V_2[/tex]
[tex]P_1 = 985 mm Hg[/tex]
[tex]V_1 = 345 mL[/tex] =
[tex]P_2 = ?[/tex]
[tex]V_2 = 4.50 liters[/tex]
The pressure of the gas is originally 985 mm Hg and the volume is 345 mL.
We are solving for the new volume, so we must isolate the variable V₂.
Now putting all the values in the equation:
[tex]P_1V_1=P_2V_2[/tex]
[tex]985 X 0.345 L=P_2 X 4.50[/tex]
[tex]P_2[/tex] = 75.51 mmHg
Hence, the new pressure is 75.51 mmHg.
Learn more about gas law here:
https://brainly.com/question/24217642
#SPJ1
You are standing outside in a rural area at night, looking up to the sky and observe many stars. If you were to look up to the sky in the city on that exact same night, what would you observe? (2 points)
Group of answer choices
That only the street lights shine in the sky
That there appears to be little to no stars in the sky
That there appears to be many stars in the sky
Answer:
That there appears to be many stars in the sky
Explanation: hope this helps! <33333
Plants such as _______________ provided much nitrogen to the soil.
Answer:
Abiotic
Explanation:
Its because it includes water, sunlight, tempature and soil
A sodium chloride solution with a Molarity of 0.239 M has a volume of 158 mL. How many grams
of solute are in the solution?
Answer:
2.21 grams
Explanation:
The first thing you need to do is find the chemical formula for sodium chloride which is NaCl (Molar mass: 58.44 g/mol).
The next the thing to do is to convert the mL to L by dividing by 1000 which will give us 0.158 L.
Now we look at the molarity formula M = n/L, plug in the molarity for M and the liters for L. 0.239 M (mol/L) = n/0.158 L.
Solve for n to get the number of moles of NaCl in the solution. You should get 0.037762 moles.
Then we have to multiply this by the molar mass of NaCl, (0.037762 mol)*(58.44 g/mol).
Moles cancel and when we round to sig figs we are left with 2.21 grams.
Hope this helps.
Which organisms are consumers?
Choose all correct answers.
Mushrooms
Snake
Frog
Grasshopper
Monkey
Grass
Answer:
Snake
Frog
Grasshopper
Monkey
Mushroom
True or False - Elemental gases are relatively insoluble in water and should be given the state (g).
Answer:
True
Explanation:
I assume this is refering to gases such as O2, H2, I2, F2, ect. And possibly the nobel gases which are completly insoluable. As gases they should be given the state (g).
Elemental gases are relatively insoluble in water and should be given the state (g). The given statement is true.
An example of elemental gas is Helium (He).
Helium belongs to the class of noble gases, these elements are defined by their low reactivity, also as gases, they do not have color or odor. Helium is part of this group that contains other 5 elements because Helium characteristics are similar to other noble gases, indeed this is the first noble gas in the periodic table. Additionally, helium is an abundant element found in all the universe especially in stars. Helium gas is used to fill balloons.
To know more about gas here
https://brainly.com/question/3965394
#SPJ2
If you add 5.9 mL 4.00 mL of pure water to 28.752 mL 6.00 mL of 0.56 M 0.750 M NaCl solution, what is the concentration of sodium chloride in the diluted solution?
pick one volume and concentration as a sample
5.9 ml + 28.752 ml = 34.652
M1V1=M2V2
0.56 x 28.752 = M2 x 34.652
M2=0.464 M
PLEASE HELPPPP ASAPPPPPP!!!!!!!
Answer:
that the oxygen atom is not equal on both sides
Explanation:
Thus the reaction is not balanced.
Calculate the volume(mo) of 0.50 M NaCl stock solution need to make 100mL of a diluted solution with a concentration of 0.03
Answer:
.006L or 6 mL
Explanation:
When was electricity invented?
Answer:In 1752
Explanation:Benjamin franklin in 1752 to prove that lightning was electrical,he flew a kite during a thundorstorm.He tied a metal key onto the string and as he suspected it would ,electrically from the storms clouds flowed down the string ,which was wet and he received an electrical shock.
Electricity was discovered and understood by many scientists. Benjamin Franklin is given the credit for discovering electricity. In the year 1752, Benjamin Franklin conducted an experiment using a kite and key on a rainy day.
Predict the products of each reaction. Balance the equation, and then write the net ionic equation
A chemical equation is an equation showing the formation of new products from reactants.
What is a chemical reaction?A chemical reaction is a reaction which involves changes in the composition and chemical properties of substances resulting in the formation of new substances.
A chemical reaction is usually represented by chemical equations.
A balanced chemical equation is one in which the atoms of elements are equal on both sides of the equation.
A net ionic equation shows only the ions that form products.
Therefore, a chemical equation is an equation showing the formation of new products from reactants.
Learn more about chemical equations at: https://brainly.com/question/26227625
#SPJ1
Scientists use models to
A - Stop the occurrence of tsunamis due to an earthquake
B - Predict the damages due to an earthquake
C - Change the location of a volcanic eruption
D - Increase the duration of a volcanic eruption
A 49.2 g sample of barium hydroxide is dissolved in water and the solution is diluted to give a final volume of 629.84 mL. What is the final molarity of the solution?
Answer:
.455 M
Explanation:
Ba (OH)^2 has mole weight of (from periodic table) = 171.341 gm/mole
49.2 gm / 171.341 gm/mole = .287 mole
.287 M / .62984 L = .455 M
Which statement(s) about neutrons is/are TRUE?
SELECT ALL THAT APPLY
The major clue to their existence was extra mass in
a atoms that protons and electrons could not
account for.
b They were observed and measured directly, like
protons and electrons were.
C They have the same mass as protons.
d They have a negative charge.
Answer:
C
Explanation:
Because D ask "They have a negative charge" yes and no, but neutrons do, Why? Well because the neutron has a negative charge both in its inner core and its outer edge, with a positive charge sandwiched in between to make the particle electrically neutral. Whilst B is wrong because like protons and electrons they were both measured and observed differently, just as the neutron. So that makes C the only correct answer.