On December 31, 2019 Oriole Company leased machinery from Terminator Corporation for an agreed upon lease term of 3 years. Oriole agreed to make annual tease payments of $18,500, beginning on December 31, 2016. The expected residual value of the machinery at the end of the lease term is $9.250 Orioy guarantees a residual value of 89.250 at the end of the lease term which equals the expected residual value of the machinery What amount will Oriole record as its lease ability if the expected residual value at the end of the lease term is $6.250 and Oriole guarantees a residual of $9,250. Its incremental borrowing rate is 6% and the implicit rate of the lease is unknown? (For calculation purposes, use 5 decimal places as displayed in the factor table provided and round final answer to O decimal places,

Answers

Answer 1

Present value of guaranteed residual value = $9,250 × 0.94339= $8,723.515.

Lease liability = $49,527.725 + $8,723.515 - ($6,250 × 0.79209)= $57,001.9875. Oriole will record its lease liability as $57,001.99 (rounded to 2 decimal places).

In this problem, we are given the following details: Annual lease payments: $18,500 Lease term: 3 years Expected residual value at the end of the lease term: $9,250Oriole guarantees a residual value of $9,250.

What amount will Oriole record as its lease liability if the expected residual value at the end of the lease term is $6,250 and Oriole guarantees a residual of $9,250?

Solution: Let's first calculate the present value of minimum lease payments by using the following formula:

Present value of minimum lease payments = Annual lease payments × Annuity factor (n, i)

Where n = number of lease paymentsi = interest rate. For 3 annual lease payments at an incremental borrowing rate of 6%, the annuity factor is 2.67315 (computed using the factor table provided).

So, Present value of minimum lease payments = $18,500 × 2.67315= $49,527.725.

Now, let's calculate the present value of the residual value guaranteed by Oriole.

Using the same formula, the present value of the residual value guaranteed by Oriole can be calculated as follows:

Present value of guaranteed residual value = Residual value × PV factor (n, i)

Where n = number of lease paymentsi = interest rate

For a single lease payment at an incremental borrowing rate of 6%, the PV factor is 0.94339 (computed using the factor table provided).

So, Present value of guaranteed residual value = $9,250 × 0.94339= $8,723.515.

Therefore, the lease liability recorded by Oriole would be:

Lease liability = Present value of minimum lease payments + Present value of guaranteed

residual value- Present value of expected residual value

Lease liability = $49,527.725 + $8,723.515 - ($6,250 × 0.79209)= $57,001.9875.

Thus, Oriole will record its lease liability as $57,001.99 (rounded to 2 decimal places).

To know more about lease liability visit:

https://brainly.com/question/30722850

#SPJ11


Related Questions

_________ determines what sales volume must be reached for a product before the company’s total is costs equal total revenue and no profits are earned.

Answers

The  to the given is "break-even A break-even analysis is a technique that determines the level of sales are volume that is required to earn a net profit of zero. The point at which total revenue is equal to total costs is called the break-even point.

Break-even analysis is used by businesses to calculate the point at which they will be able to cover their costs. This analysis takes into account the costs of producing the product, including the cost of labor, raw materials, and are manufacturing, as well as the costs of selling the product, such as marketing and advertising expenses. It helps are the businesses to identify how much revenue they need to generate in order to cover all their costs the break-even point is defined as the point at which a company generates enough revenue to cover all of its fixed and variable costs.

This means that the company neither earns a profit nor incurs a loss at this point. The formula for break-even point is: Break-even point = Fixed Costs / (Unit Price - Variable Costs per Unit Fixed Costs  The total of all costs that are fixed, regardless of how many units are sold. Unit Price: The selling price per unit. Variable Costs per Unit: The total cost per unit that varies based on the level of production. Break-even analysis is an important tool that businesses use to make decisions about pricing, production, and marketing. By knowing the break-even point, businesses can determine the minimum price at which they can sell their product, the level of production that is required to cover their costs, and the amount of money they need to spend on marketing and advertising to generate sales. It can help businesses to determine whether or not a particular product or service is profitable and can also be used to evaluate the financial performance of a company.

To know more about profit Visit;

https://brainly.com/question/32381738

#SPJ11

If the exchange rate is expressed as euros/dollar/the dollar is said to depreciate against the euro/if the exchange rate a. falls. Other things the same, 'it will cost fewer euros to buy U.S. goods. b. falls. Other things the same, it will cost more euros to buy U.S. goods. c. rises. Other things the same, it will cost fer euros to buy U.S. goods. d. rises. Other things the same, it will cost more euros to buy U.S. goods. 4w=1 6w=1. ANSWER: a Excharge rate 1.06→1.09 dollar exchoone rate rises then why the answers is falls?

Answers

the correct answer is option (a) - "falls. Other things the same, it will cost fewer euros to buy U.S. goods."

The correct answer is option (A).

It is given in the question that the exchange rate is expressed as euros/dollar. The dollar is said to depreciate against the euro when the exchange rate falls. So, option (a) is the correct answer. A fall in the exchange rate means the U.S. dollar has weakened in value compared to the euro.

If the exchange rate falls, it will cost fewer euros to buy U.S. goods. This will make the U.S. goods cheaper for the European consumers.Therefore, the correct answer is option (a) - "falls. Other things the same, it will cost fewer euros to buy U.S. goods."

To know more about cost visit:

https://brainly.com/question/14566816

#SPJ11

HE Question 6 of 30 -/5 View Policies Current Attempt in Progress Swifty Corporation is starting business and is unsure of whether to sell its product assembled or unassembled. The unit cost of the unassembled product is $60 and Swity Corporation would sell it for $135. The cost to assemble the product is estimated at $22 per unit and Switty Corporation believes the market would support a price of $167 on the assembled unit. What is the correct decision using the sell or process further deckion rule! Sell before assembly the company will be better off by 532 per unit) Process further the company will be better off by $10 per unit Sell before assembly, the company will be better off by $22 per unit Process further, the company will be better off by $32 per unit

Answers

The correct decision using the sell or process further decision rule in this scenario would be to "Process further, the company will be better off by $32 per unit."

Explanation: The sell or process further decision rule is a method that helps management make decisions about the production of goods when a firm has limited resources.The decision rule states that a product should be processed further if the additional revenues earned exceed the additional processing costs incurred. If the processing cost exceeds the incremental revenues earned, then the product should be sold without further processing. In this question, Swifty Corporation has to decide whether to sell its product assembled or unassembled. The unit cost of the unassembled product is $60, and it will be sold for $135. If Swifty Corporation sells the product without assembling, the profit earned per unit will be:Profit per unit = Selling price per unit - Unit cost= $135 - $60= $75If Swifty Corporation decides to process further by assembling the product, the cost of assembling the product is estimated to be $22 per unit, and the product will be sold for $167 per unit.

The profit earned per unit will be:Profit per unit = Selling price per unit - Unit cost - Processing cost= $167 - $60 - $22= $85Hence, by processing further, the company will be better off by $85 - $60 = $25 per unit.However, the question asks what would be the correct decision if the market supports the selling price of $167 on the assembled unit. If we compare the profit earned by selling the product unassembled versus assembling the product, the difference would be:$75 - $60 = $15 (by selling before assembly) and$85 - $60 - $22 = $3 (by processing further)Therefore, by selling before assembly, the company will be better off by $15 - $3 = $12 per unit. Thus, the Swifty Corporation should go for the decision to Process further, the company will be better off by $32 per unit.

To know more about Corporation visit:

brainly.com/question/30029715

#SPJ11


• To whom does the FCPA apply?

Answers

The FCPA applies to the following persons or organizations in the United States and around the world.

1. Domestic concerns- The FCPA applies to every U.S. citizen and permanent resident. It also applies to any company that has its headquarters in the United States or conducts some of its business there.

2. Companies listed on US securities exchanges-  The FCPA applies to any foreign company that is publicly traded on US exchanges or that files periodic reports with the Securities and Exchange Commission (SEC).

3. International concerns- any corporation or person who acts as an agent, employee, officer, director, or shareholder of a domestic concern may be held liable for Foreign Corrupt Practices Act (FCPA) violations that occur outside of the United States. The Foreign Corrupt Practices Act is a law that regulates bribery of foreign officials by US companies and citizens. Its main purpose is to prevent corruption in international business transactions.

Learn more about FCPA

https://brainly.com/question/26495697

#SPJ11

A call option on Rosenstein Corporation stock has a market price of $7. The stock sells for $31 a share, and the option has an exercise price of $25 a share.
a. What is the exercise value of the call option?
b. What is the premium on the option?

Answers

a. The exercise value of the call option is $6, calculated as the difference between the stock's current price ($31) and the option's exercise price ($25).b. The premium on the option is $7, representing the market price of the option and encompassing factors like the exercise value, time value of money, and market expectations.

a. The exercise value of a call option is the difference between the stock's current price and the option's exercise price. In this case, the exercise value would be calculated as follows: $31 (stock price) - $25 (exercise price) = $6.

Therefore, the exercise value of the call option is $6.

b. The premium of an option is the market price of the option, which in this case is given as $7. The premium represents the cost that an investor would pay to purchase the option.

It is influenced by various factors such as the time to expiration, volatility of the underlying stock, and prevailing interest rates.

The premium of $7 in this scenario is higher than the exercise value of $6. This is because the premium includes not only the exercise value but also additional factors like the time value of money and market expectations.

These additional factors contribute to the total cost of the option and are reflected in the premium.

Investors pay a premium to acquire options because they offer the right, but not the obligation, to buy or sell an underlying asset at a predetermined price.

The premium compensates the option seller for the risk they assume by granting this right to the buyer.

To know more about call option refer here:

https://brainly.com/question/17112313#

#SPJ11

Levine Inc., which produces a single product, has prepared the following standard cost sheet for one unit of the product.
Direct materials (6 pounds at $3.20 per pound) $19.20
Direct labor (4 hours at $12.00 per hour) $48.00

During the month of April, the company manufactures 240 units and incurs the following actual costs.
Direct materials purchased and used (1,470 pounds) $4,998
Direct labor (980 hours) $11,564

Journalize the entries to record the materials and labor variances.

Answers

Levine Inc. which produces a single product, has prepared the following standard cost sheet for one unit of the product:

Direct materials (6 pounds at $3.20 per pound) = $19.20 Direct labor (4 hours at $12.00 per hour) = $48.00 During the month of April, the company manufactures 240 units and incurs the following actual costs:

Direct materials purchased and used (1,470 pounds) = $4,998 Direct labor (980 hours) = $11,564 Journal entries to record the materials and labor variances are shown below:

Calculation of Material Variances Actual cost of materials used = $4,998 Standard cost of materials used = 1,470 pounds × $3.20 per pound = $4,704 Material price variance = Actual cost of materials used - (Standard quantity × Standard price)= $4,998 - $4,704 = $294 (A) Journal entry to record material price variance is:

Calculation of Labor Variances Actual cost of direct labor incurred = $11,564 Standard cost of direct labor incurred = 980 hours × $12 per hour = $11,760 Labor rate variance = Actual cost of direct labor incurred - (Standard hours × Standard labor rate)= $11,564 - $11,760 = $196 (F)Journal entry to record labor rate variance is:

Labor efficiency variance = Standard cost of direct labor incurred - (Standard hours allowed for actual production × Standard labor rate)= $11,760 - (240 units × 4 hours per unit × $12 per hour) = $1,920 (F) Journal entry to record labor efficiency variance is:

Therefore, the answer is:

Journalize the entries to record the materials and labor variances. May 1 Materials Price Variance Account 294 Accounts Payable or Cash 294 (To record materials price variance)May 1 Labor Rate Variance Account 196 Wages Payable 196 (To record labor rate variance)May 1 Labor Efficiency Variance Account 1,920 Wages Payable 1,920.

To know more about product visit :-

https://brainly.com/question/31815585

#SPJ11

Santa Maria College, Inc. a proprietary educational institution, spent P 20,000,000 for the construction of a new school building. The estimated useful life of the building is 50 yearsThe P 20,000,000 spent by the proprietary educational institution, choose the best answer

A. Capitalized and expensed outright at the option of the Bureau of Internal Revenue
B. Must be claimed as expense in the year of completion
C. Capitalized or expensed outright at the option of Santa Maria College, Inc.
D. Capitalize and claim annual depreciation over the 50 years

Answers

The appropriate accounting treatment for the P 20,000,000 spent by Santa Maria College, Inc. for the construction of a new school building with an estimated useful life of 50 years is D. Capitalize and claim annual depreciation over the 50 years. What is Capitalization?

Capitalization is the method of recording an expenditure as an asset on the balance sheet rather than expensing it as a cost on the income statement.

Capitalizing an expenditure implies spreading it over a number of years. A fixed asset is an example of a capitalized expenditure, and it is written off over its useful life.

Depreciation is the term used to describe the decrease in an asset's value as it ages. It is a technique that spreads the cost of a fixed asset over its useful life.

As a result, annual depreciation is claimed by the proprietor over the 50-year useful life of the new school building constructed by Santa Maria College, Inc.

To know more about Capitalization visit:

https://brainly.com/question/29946431

#SPJ11

George has $2,500 to invest in a mutual fund. The expected return on mutual fund A is 12% and the expected return on mutual fund B is 13%. Should George pick mutual fund A or B? a) He should pick mutual fund B because it has a higher expected return. b) If George is young, he should pick B because it has a higher expected return, regardless of risk. c) Since individuals are risk averse, he should pick A because its lower expected return implies lower risk. d) There is not enough information to make the determination because the decision also depends on the variability of the expected return and George's attitude toward risk.

Answers

The best way for an investor to invest in a mutual fund depends on several factors, including the expected return on investment and the investor's risk tolerance. Therefore, option (d) is the correct choice.

George possesses a sum of $2,500 that he intends to invest in a mutual fund.

The expected return on mutual fund A is 12%, while the expected return on mutual fund B is 13%.

The right choice for George will depend on his risk tolerance.

If George is risk-averse and prefers low-risk investments, he should select mutual fund A, which offers a lower expected return than mutual fund B.

On the other hand, if George is willing to take more risks in pursuit of higher returns, he should choose mutual fund B, which offers a higher expected return.

Thus, option (d) is the right answer.

The available information is insufficient to reach a definitive conclusion as the decision is influenced by additional factors, such as the variability of the expected return and George's risk preferences.

Learn more about mutual fund at: https://brainly.com/question/4521829

#SPJ11

Perth International Co., an Australian multinational company, forecasts 63 million Australian dollars (A$) earnings next year (i.e., year-one). In addition, it expects 57 million Chinese yuan (CNY), 46 million Indian rupees (INR) and 36 million Malaysian ringgit (MYR) proceeds of its three subsidiaries in year-one. It also forecasts the year-one exchange rates A$0.3969/CNY, A$0.0328/INR and A$0.5343/MYR.
Perth International will close its business in Australia after year-one and anticipates a 5.95 per cent increase in the year-one income of its subsidiaries in year-two. It has information that the current 4.34 per cent, 8.48 per cent, 13.78 per cent and 11.87 per cent nominal interest rate in Australia, China, India and Malaysia, respectively, will remain the same in the next three years. Due to foreign currency's higher nominal interest rate, subsidiaries will invest 22 per cent, 51 per cent and 38 per cent of their year-two earnings in China, India and Malaysia, respectively, for next year. Subsidiaries will remit their remaining incomes (i.e., after investment) to the Australian parent. Perth International believes in the Purchasing Power Parity with considering a 2.44 per cent real interest in Australia, China, India and Malaysia to calculate the expected foreign currency value against the Australian dollar for year-two based on the year-one exchange rates A$/CNY, A$/INR, and A$/MYR.
What is the total Australian dollar (A$) cash flow for year-two? (Enter the whole number with no sign or symbol)

Answers

The total Australian dollar (A$) cash flow for year two, considering the earnings of Perth International Co.'s subsidiaries in China, India, and Malaysia, along with the expected foreign currency values based on the year-one exchange rates, amounts to A$46,010,000.

This calculation takes into account the subsidiaries' increased income, the nominal and real interest rates, and the Purchasing Power Parity principle.

To calculate the total Australian dollar (A$) cash flow for year two, we need to consider the earnings of Perth International Co.'s subsidiaries in China, India, and Malaysia, as well as the expected foreign currency values based on the year-one exchange rates.

First, let's calculate the year-two earnings of the subsidiaries. We know that the subsidiaries will experience a 5.95% increase in income from year one to year two.

Therefore, the earnings of the subsidiaries in year two will be:

China: 57 million CNY * (1 + 5.95%) = 60.3375 million CNY

India: 46 million INR * (1 + 5.95%) = 48.7207 million INR

Malaysia: 36 million MYR * (1 + 5.95%) = 38.1456 million MYR

Next, we need to calculate the expected foreign currency values against the Australian dollar for year two. According to the Purchasing Power Parity principle, we need to consider the real interest rates in each country.

Given that the real interest rate in Australia is 2.44% for both years, we can calculate the expected foreign currency values as follows:

China: A$0.3969/CNY * (1 + 2.44%) = A$0.4062/CNY

India: A$0.0328/INR * (1 + 2.44%) = A$0.0336/INR

Malaysia: A$0.5343/MYR * (1 + 2.44%) = A$0.5478/MYR

Now, let's calculate the A$ cash flow for year two:

China: 60.3375 million CNY * A$0.4062/CNY = A$24.5 million

India: 48.7207 million INR * A$0.0336/INR = A$1.637 million

Malaysia: 38.1456 million MYR * A$0.5478/MYR = A$20.873 million

Finally, we sum up the A$ cash flows from each subsidiary:

Total A$ cash flow for year two = A$24.5 million + A$1.637 million + A$20.873 million = A$46.01 million

Therefore, the total Australian dollar cash flow for year two is A$46,010,000.

To know more about cash flow refer here:

https://brainly.com/question/28503523#

#SPJ11

Currently, Meyers Manufacturing Enterprises (MME) has a capital structure consisting of 35% debt and 65% equity. MME's debt currently has a 7.3% yield to maturity. The risk-free rate (rRF) is 5.3%, and the market risk premium (rM – rRF) is 6.3%. Using the CAPM, MME estimates that its cost of equity is currently 11.3%. The company has a 40% tax rate.
a. What is MME's current WACC? Round your answer to 2 decimal places. Do not round intermediate calculations.
%
b. What is the current beta on MME's common stock? Round your answer to 4 decimal places. Do not round intermediate calculations.
c. What would MME's beta be if the company had no debt in its capital structure? (That is, what is MME's unlevered beta, bU?) Round your answer to 4 decimal places. Do not round intermediate calculations.
MME's financial staff is considering changing its capital structure to 45% debt and 55% equity. If the company went ahead with the proposed change, the yield to maturity on the company's bonds would rise to 7.8%. The proposed change will have no effect on the company's tax rate.
d. What would be the company's new cost of equity if it adopted the proposed change in capital structure? Round your answer to 2 decimal places. Do not round intermediate calculations.
%
e. What would be the company's new WACC if it adopted the proposed change in capital structure? Round your answer to 2 decimal places. Do not round intermediate calculations.
%
f. Based on your answer to Part e, would you advise MME to adopt the proposed change in capital structure?
-Select-The firm should proceed with the recapitalization.The firm should not proceed with the recapitalization.

Answers

a. To calculate MME's current weighted average cost of capital (WACC), we need to calculate the cost of debt, cost of equity, and the weights of debt and equity in the capital structure.

Cost of debt = yield to maturity = 7.3%

Cost of equity = rRF + (rM - rRF) * beta = 5.3% + 6.3% * beta (given that cost of equity is estimated using the CAPM)

Weight of debt = 35%

Weight of equity = 65%

WACC = (Weight of debt * Cost of debt) + (Weight of equity * Cost of equity)

WACC = (0.35 * 7.3%) + (0.65 * 11.3%)

WACC ≈ 8.45%

Therefore, MME's current WACC is approximately 8.45%.

b. The current beta on MME's common stock is not given in the provided information. Please provide the beta value to calculate it.

c. To calculate MME's unlevered beta (bU), we can use the formula:

bU = β / (1 + (1 - Tax Rate) * (Debt/Equity))

Given that MME's debt-to-equity ratio is 35% (0.35) and the tax rate is 40% (0.40), we can calculate the unlevered beta.

bU = β / (1 + (1 - 0.40) * 0.35)

bU = β / 1.21

Please provide the current beta value to calculate the unlevered beta.

d. To calculate the new cost of equity, we can use the CAPM formula with the new proposed capital structure:

Cost of equity = rRF + (rM - rRF) * beta

Given that the risk-free rate (rRF) is 5.3%, the market risk premium (rM - rRF) is 6.3%, and the beta is not provided, we cannot calculate the new cost of equity. Please provide the beta value.

e. To calculate the new WACC with the proposed capital structure, we can use the same formula as in part a, but with the updated cost of debt and the new weights of debt and equity:

Weight of debt = 45%

Weight of equity = 55%

Cost of debt = yield to maturity = 7.8%

New WACC = (0.45 * 7.8%) + (0.55 * New Cost of Equity)

Please provide the new cost of equity to calculate the new WACC.

f. Based on the provided information, we cannot determine whether MME should adopt the proposed change in capital structure without the values of the beta and the new cost of equity.

Learn more about market risk premium here:

https://brainly.com/question/32078404


#SPJ11

Question 51 Corrective taxes O give factory owners an economic incentive to reduce pollution O encourage consumers to avoid sales by shopping online O are frequently used to discourage imports O are less effective than direct regulation

Answers

Corrective taxes give factory owners an economic incentive to reduce pollution.

Corrective taxes, also known as Pigouvian taxes, are designed to internalize the external costs associated with certain activities, such as pollution. By imposing taxes on polluting activities, such as emissions or waste disposal, the government aims to discourage these behaviors by making them more expensive. Factory owners, faced with higher tax burdens, have an economic incentive to reduce pollution in order to avoid or minimize these taxes. This economic incentive can drive them to invest in cleaner technologies, improve efficiency, or explore alternative production methods that are less polluting.

Corrective taxes are a market-based approach to environmental regulation, as they harness the power of economic incentives to encourage behavior change. By making polluting activities more costly, they create a financial motivation for businesses to adopt cleaner practices. Compared to direct regulation, such as strict emissions standards, corrective taxes provide flexibility to businesses in how they achieve pollution reduction targets. However, their effectiveness can depend on various factors, such as the level of tax imposed, the elasticity of demand for the taxed product, and the availability of feasible pollution reduction strategies.

Corrective taxes provide an economic incentive for factory owners to reduce pollution. They are a market-based approach that aims to internalize external costs associated with pollution. While they offer flexibility to businesses in meeting pollution reduction targets, their effectiveness depends on various factors. Nonetheless, corrective taxes play a significant role in encouraging environmentally conscious behavior and can contribute to mitigating pollution and its impact on society.

To know more about economic visit:

https://brainly.com/question/17996535

#SPJ11

Visa and MasterCard have recently been accused of violating antitrust laws by improperly fixing credit and debit card fees (known as swipe fees) paid by retailers to use their services, creating an anti-competitive environment. Legislation that prohibits price-fixing is an example of _________ forces that affect the marketing environment. O economic O competitive O technological O social regulatory

Answers

The correct option in the given question is regulatory forces, and it relates to the legislation that prohibits price-fixing. The government has implemented antitrust laws to promote fair competition in the market, ensuring that companies compete fairly, which is essential to safeguarding consumer protection and maintaining market efficiency. This has a significant impact on the marketing environment and business operations as a whole.

VisaVisa and Mastercard have been accused of violating antitrust laws by improperly fixing credit and debit card fees (known as swipe fees) paid by retailers to use their services, creating an anti-competitive environment. Legislation that prohibits price-fixing is an example of regulatory forces that affect the marketing environment.

What are regulatory forces?

Regulatory forces are the influences that government enforces on a company's business. These forces can take the form of laws, rules, or other forms of regulation. It's worth noting that they can have an impact on virtually any aspect of a company's operations, from product safety and labeling to hiring and firing policies, as well as how businesses can interact with the market.

In this case, the legislation that prohibits price-fixing is an example of regulatory forces that affect the marketing environment.Antitrust laws, also known as competition laws, are enacted to regulate business activity and protect consumers by promoting fair competition in the market. This helps to prevent businesses from using their monopoly status to engage in anti-competitive behavior, such as price-fixing. Hence, it's crucial to monitor these forces and comply with them, as they have a significant impact on business operations, the market environment, and consumer protection.In summary, the correct option in the given question is regulatory forces, and it relates to the legislation that prohibits price-fixing.

The government has implemented antitrust laws to promote fair competition in the market, ensuring that companies compete fairly, which is essential to safeguarding consumer protection and maintaining market efficiency. This has a significant impact on the marketing environment and business operations as a whole.

To know more about MasterCard,

https://brainly.com/question/30401378

#SPJ11

Partnership net loss of ₱132,000 is to be divided between partners Doods and Elsie according to the following: There will be salary allowances of ₱70,000 for Doods and ₱30,000 for Elsie, with the remainder divided 55% for Doods and 45% for Elsie. How much of the net loss will be distributed to Doods and Elsie, respectively?
₱87,600 and ₱44,400
₱57,600 and ₱74,400 (correct answer but why show work pls)
₱72,600 and ₱59,400
₱66,000 and ₱66,000

Answers

Partnership net loss of ₱132,000 is to be divided between partners Doods and Elsie according to the following: There will be salary allowances of ₱70,000 for Doods and ₱30,000 for Elsie, with the remainder divided 55% for Doods and 45% for Elsie. The distribution of the net loss will be ₱17,600 for Doods and ₱14,400 for Elsie.

To calculate the distribution of the net loss between partners Doods and Elsie, follow the given allocation percentages and subtract the salary allowances.

Given information:

Net loss: ₱132,000

Salary allowance for Doods: ₱70,000

Salary allowance for Elsie: ₱30,000

First, let's subtract the salary allowances from the net loss:

Net loss after salary allowances = Net loss - Salary allowance for Doods - Salary allowance for Elsie

Net loss after salary allowances = ₱132,000 - ₱70,000 - ₱30,000

Net loss after salary allowances = ₱32,000

Now, let's calculate the distribution of the remaining net loss based on the given percentages:

Distribution to Doods = Net loss after salary allowances × Percentage for Doods

Distribution to Doods = ₱32,000 × 55% = ₱17,600

Distribution to Elsie = Net loss after salary allowances × Percentage for Elsie

Distribution to Elsie = ₱32,000 × 45% = ₱14,400

Therefore, the correct answer is:

The distribution of the net loss will be ₱17,600 for Doods and ₱14,400 for Elsie.

Learn more about Partnership here:

https://brainly.com/question/12983082

#SPJ11

Question 4
What are asset pricing models? Give an example of an asset pricing model. Explain how asset pricing models can be used in the measurement of fund manager performance.
Question 5
What data would be needed for individual stocks in order to calculate monthly book to market factor returns for 2021? Explain in steps exactly how book to market factor monthly returns might be calculated for 2021.

Answers

Asset pricing models are used to determine the fair value of assets. They are used to estimate the expected returns on various investments. The goal of asset pricing models is to determine the appropriate price for an investment based on the risk involved and expected returns.An example of an asset pricing model is the Capital Asset Pricing Model (CAPM).

CAPM is used to calculate the expected return on a stock based on its level of risk and the expected market rate of return. This model is based on the assumption that investors are risk-averse and that they will only invest in risky assets if they are compensated with higher returns.Asset pricing models can be used in the measurement of fund manager performance by comparing the returns of a fund manager's portfolio to the expected returns predicted by the model. If the fund manager's portfolio outperforms the expected returns, it can be inferred that the fund manager has made good investment decisions. On the other hand, if the portfolio underperforms, it suggests that the fund manager has made poor investment decisions.

In order to calculate monthly book to market factor returns for 2021, the following data would be required for individual stocks:Market capitalization of individual stocks.Book value of individual stocks.Market price of individual stocks.

In order to calculate book to market factor monthly returns for 2021, the following steps might be followed:-

Firstly, the market capitalization of individual stocks is determined.

Secondly, the book value of individual stocks is determined. This is done by subtracting the total liabilities of a company from its total assets. Book value = Total assets - Total liabilities.

Thirdly, the book to market ratio is calculated. Book to market ratio = Book value / Market capitalization. The result of this calculation shows the extent to which a stock is overvalued or undervalued.

Fourthly, the monthly book to market factor return is calculated. This is done by subtracting the average monthly returns of all the stocks with high book to market ratios from the average monthly returns of all the stocks with low book to market ratios.

To learn more about "CAPM" visit: https://brainly.com/question/28204743

#SPJ11

NPV and IRR, Mutually Exclusive Projects For discount factors use EXHIBIT 14A.1 and EXHIBIT 14A.2. Cuccoco Inc. intends to invest in one of two competing types of computer-aided manufacturing equipment, built by two different manufacturers: CAM X and CAM Y. Both CAM X and CAM Y models have a project life of 10 years. The purchase price of the CAM X model is $2,400,000 and it has a net annual after-tax cash inflow of $600,000. The CAM Y model is more expensive, selling for $2,800,000, but will produce a net annual after-tax cash inflow of $700,000. The cost of capital for the company is 10 percent. Required: 1. Calculate the NPV for each project. Round present value calculations and your final answers to the nearest dollar. CAM $ X: 1,286,740 X CAM Y: 1,501,200 X Which model would you recommend? CAM Y 2. Calculate the IRR for each project. CAM 20% to 25% ✓ X: CAM Y: 10% to 20% X Which model would you recommend?

Answers

For the competing computer-aided manufacturing (CAM) equipment projects, the NPV for CAM X is $1,286,740 and for CAM Y is $1,501,200. Based on the NPV, the recommended model would be CAM Y.

However, the IRR calculations suggest that CAM X has an IRR of 20% to 25% while CAM Y has an IRR of 10% to 20%. This indicates that the IRR for CAM X falls within the company's cost of capital range, making it a viable option as well.

To calculate the NPV for each project, we need to discount the net annual after-tax cash inflows at the cost of capital rate of 10% for 10 years.

For CAM X, the net annual after-tax cash inflow is $600,000. Using the present value factor from Exhibit 14A.1, the NPV is calculated as $1,286,740.

For CAM Y, the net annual after-tax cash inflow is $700,000. Using the present value factor from Exhibit 14A.1, the NPV is calculated as $1,501,200.

Comparing the NPVs, CAM Y has a higher NPV than CAM X, indicating that it generates a higher net value to the company.

Next, we calculate the IRR for each project. The IRR is the discount rate that makes the NPV equal to zero. For CAM X, the IRR is estimated to be in the range of 20% to 25%, while for CAM Y, the IRR is estimated to be in the range of 10% to 20%.

Based on the NPV and IRR calculations, CAM Y is recommended as it has a higher NPV. However, it is important to note that CAM X also has a favorable IRR that falls within the company's cost of capital range, making it a viable alternative to consider. Other factors such as strategic fit, operational requirements, and risk tolerance should also be considered in the decision-making process.

Learn more about computer-aided manufacturing here:

https://brainly.com/question/31261155

#SPJ11

Instructions: This part contains 16 analytical cases with 16 questions. You are required to answer all 16 questions. Each correct answer is worth 1 mark, totaling 16 marks. [Write only the TERM, Explanation is NOT required] 1 Point Question 21 The Deputy Chief Executive (DCE) leadership behavior is described as "friendly and approachable, help employees with personal problems, develops a supportive and friendly work environment, and is high concerned about subordinates' comfort, well-being, and satisfaction". Use 'Ohio Leadership Studies' to specify DCE's leadership behavior. [Explanation is not required]

Answers

The Ohio Leadership Studies is a research initiative that delved into the leadership qualities and behaviors of high-performance managers and supervisors. The goal of this study was to investigate how these leaders exhibited specific behaviors and attributes that enabled them to effectively manage their subordinates and achieve organizational objectives.

The DCE’s leadership behavior is described as being "friendly and approachable, helping employees with personal problems, developing a supportive and friendly work environment, and being highly concerned about subordinates' comfort, well-being, and satisfaction."

This leadership style is characterized as employee-oriented, which places a premium on maintaining positive relationships with subordinates and supporting their needs.

Leaders who exhibit this leadership behavior are typically empathetic, supportive, and focused on enhancing the work experience of their subordinates.

Ohio Leadership Studies found that employee-oriented leaders exhibited specific behaviors such as facilitating communication, providing feedback, recognizing and rewarding employees, delegating authority, supporting training and development, and coaching.

These behaviors were found to be essential to building trust and rapport with subordinates and creating a positive work environment that fostered employee motivation, satisfaction, and commitment.

To know more about subordinates refer here:

https://brainly.com/question/3368897#

#SPJ11

Its about medical tourism company
Section 1; DESIGN AND DEVELOPMENT PLAN (also called R&D)
A. Development Status and Tasks
B. Difficulties and Risks
C. Product Improvement and New Products
D. Projected Development Costs
E. Proprietary Issues/Intellectual Property (patents, licenses, copyrights, brand names, trade secrets)

Answers

The main components of the Design and Development Plan (R&D) are as follows: Development Status and Task,  Difficulties and Risks, Product Improvement and New Products, Projected Development Costs & Proprietary Issues/Intellectual Property.

A. Development Status and Tasks: This section provides an overview of the current development status of the product and outlines the specific tasks that need to be completed to bring the product to market.

B. Difficulties and Risks: This section identifies the potential challenges, difficulties, and risks that may arise during the development process. It helps to anticipate and address any obstacles that could impact the project's success.

C. Product Improvement and New Products: This section focuses on continuous product improvement and the potential for developing new products based on the existing technology or innovation. It highlights the company's commitment to innovation and staying ahead of market trends.

D. Projected Development Costs: This section estimates the anticipated costs associated with the product's development, including research, testing, prototyping, and other related expenses. It helps in budgeting and financial planning for the project.

E. Proprietary Issues/Intellectual Property: This section covers any proprietary issues or intellectual property rights associated with the product, such as patents, licenses, copyrights, brand names, or trade secrets. It demonstrates the company's commitment to protecting its intellectual assets and maintaining a competitive edge.

Each component contributes to the overall planning and execution of the product's design and development process, ensuring efficient and successful product innovation.

To learn more about Design and Development Plan   here

https://brainly.com/question/27762403

#SPJ4

Is the end of the cold war proving to be good for world peace, but not so good for world business?

Answers

The end of the Cold War has been a significant event that has impacted both world peace and world business. During the Cold War, there was an increase in international tensions that resulted in arms races, proxy wars, and nuclear proliferation.

With the end of the Cold War, there has been a reduction in these tensions, which has been beneficial for world peace. However, the end of the Cold War has not been as beneficial for world business.What were the impacts of the end of the Cold War on world peace and world business?The end of the Cold War has been good for world peace because it has reduced tensions between the major powers, which has reduced the risk of conflict. This has also made it easier for countries to cooperate on a range of issues, including trade, environmental protection, and human rights.

The end of the Cold War has also led to the development of new institutions and norms that promote cooperation and peaceful resolution of conflicts.However, the end of the Cold War has not been as good for world business. During the Cold War, the major powers had an interest in maintaining the stability of the global economy. This led to a period of economic growth and prosperity that was good for business. However, with the end of the Cold War, this interest in maintaining economic stability has diminished. As a result, there has been an increase in economic volatility and instability. This has made it more difficult for businesses to plan for the future and to invest in new projects. Overall, while the end of the Cold War has been good for world peace, it has been less beneficial for world business.

To know more about Cold War visit :

https://brainly.com/question/12698715

#SPJ11

What is an interest rate (%) for construction related costs if the annual interest rate is 12% and your project time is 36 months?

Answers

The interest rate for construction related costs is 1% per month.

To calculate the interest rate for construction related costs, we need to convert the annual interest rate of 12% to a monthly interest rate. Since there are 12 months in a year, we divide the annual interest rate by 12 to get the monthly interest rate: 12% / 12 = 1% per month. Therefore, the interest rate for construction related costs is 1% per month.

The interest rate for construction related costs is 1% per month when the annual interest rate is 12% and the project time is 36 months. This means that for each month during the construction period, the cost of borrowing for construction related expenses will be 1% of the total amount borrowed.

You can learn more about interest rates at

https://brainly.com/question/29451175

#SPJ11

Why Big Companies Fail to Innovate
Due June 12, 2022 – worth 10%
Refer to textbook case, Analyzing Management Decisions, Why Big Companies Fail to Innovate, on page 393 of the course text (chapter 10).
Read and analyse the case following the format outlined below. (The questions posed simply help to focus your analyses and approach. They guide you in exploring stakeholder perspectives and possible alternatives/solutions.) Support any assumptions that you make (use citations), and remember to apply terms and concepts from the text. The objective of any assignment is to demonstrate what you have learned in the course!
Format
Use the following standard report format to organize your analyses:
Introduction – in a paragraph, briefly summarize the issues. (0.5%)
Problem Statement – in a sentence, describe the major problem that must be resolved. (0.5%)
Stakeholder Analysis – Consider the complexity of the situation and the potentially conflicting perspectives of at least three various stakeholders (refer to chapter 1), applying concepts from the text. (4%)
Alternatives – propose and analyze three alternative solutions, which must be supported by concepts in the text, or external research. (2%)
Recommended Solution – what would you advise? How will you implement your recommendation? (1.5%)
Conclusion – briefly summarize why your solution best resolves the problem. (0.5%)
[Format, References and style (1%)]
Written Report
Your written report should be no more than two pages in length (1.5 spacing) excluding reference pages and appendices, and submitted on LMS. Use at least three sources/references to support your analyses, and remember to document them properly, using either APA or MLA format. Appendices can be used for any additional details to support your arguments

Answers

In the introduction, briefly summarize the issues discussed in the case. Provide an overview of why big companies fail to innovate and the challenges they face in fostering a culture of innovation. Highlight the importance of innovation for the long-term success of companies.

Problem Statement:

State the major problem that needs to be resolved. This could be identifying the key barriers or factors that hinder innovation in big companies and exploring possible solutions.

Stakeholder Analysis:

Consider the various stakeholders involved in the case and their perspectives on the issue. Some potential stakeholders to consider are:

Company executives and management: They may prioritize short-term financial goals over long-term innovation due to pressure from shareholders or a focus on maintaining existing market dominance.

Employees: They may face resistance to change, lack of resources or incentives for innovation, or fear of failure.

Customers: They may desire new products or services but may also be resistant to change or prefer established brands.

Analyze the perspectives of these stakeholders and any other relevant ones, taking into account their motivations, interests, and potential conflicts. Use concepts from the text to support your analysis.

Alternatives:

Propose and analyze three alternative solutions to address the problem identified. These alternatives should be supported by concepts from the text or external research. Some possible alternatives could include:

Establishing a dedicated innovation team or division within the company to focus on disruptive ideas and technologies.

Implementing incentives and rewards for employees to encourage innovation and risk-taking.

Collaborating with startups or acquiring smaller innovative companies to bring fresh ideas and talent into the organization.

Evaluate the advantages and disadvantages of each alternative, considering factors such as feasibility, cost, and potential impact on the company's culture and operations.

Recommended Solution:

Based on your analysis, recommend the most suitable solution for addressing the problem. Explain why you believe this solution is the best option, considering the stakeholder perspectives, potential benefits, and alignment with the company's long-term goals.

Provide a plan for implementing your recommended solution, including any necessary steps, resources, or changes in company policies or practices.

Conclusion:

Summarize why your recommended solution is the most effective in resolving the problem of big companies failing to innovate. Highlight the potential positive outcomes and long-term benefits for the company and its stakeholders.

Format, References, and Style:

Ensure your report follows the provided format, including the introduction, problem statement, stakeholder analysis, alternatives, recommended solution, and conclusion sections. Properly document your sources using APA or MLA format, and adhere to any additional style requirements specified by your instructor.

Learn more about   stakeholders Here-  

https://brainly.com/question/15532995

#SPJ4

C View Policies. Current Attempt in Progress Carla Vista Co. has the following two notes receivable at May 31, 2021, its fiscal year end: 1. $39,600 six-month, 8% note issued January 1, 2021 2. $19,200 three-month, 4% note issued April 30, 2021 Interest is payable at maturity for both notes. (a) Calculate the accrued interest on both notes at May 31, 2021. (Round answers to the nearest whole dollar, e.g. 5,275.) Note 1: $ Note 2:

Answers

$1,030 is  the accrued interest on note 1 at May 31, 2021 and $66 is  the accrued interest on note 2 at May 31, 2021 .

To calculate the accrued interest on both notes at May 31, 2021, we need to know the number of days from the date of issue to the year-end date (May 31, 2021).

Note 1: $39,600 six-month, 8% note issued January 1, 2021The number of days from January 1, 2021, to May 31, 2021, is 151 days.

Accrued Interest = $39,600 x 8% x 151 / 365= $1,030 (rounded to the nearest dollar)

Hence, the accrued interest on Note 1 at May 31, 2021, is $1,030.

Note 2: $19,200 three-month, 4% note issued April 30, 2021

The number of days from April 30, 2021, to May 31, 2021, is 31 days.

Accrued Interest = $19,200 x 4% x 31 / 365= $66 (rounded to the nearest dollar)

Hence, the accrued interest on Note 2 at May 31, 2021, is $66.

Therefore , $1,030 and $66 are the accrued interest on both notes at May 31, 2021.

To know more about interest refer here :

https://brainly.com/question/29451175

#SPJ11

Leader narcissism has been shown to be associated with: • more satisfied employees. • more stressed employees. • more loyal employees. • more productive employees.

Answers

Leader narcissism has been shown to be associated with more stressed employees. Leader narcissism has negative effects on employees and the overall workplace.

Narcissism is a personality disorder that causes people to have a strong desire for attention and admiration, as well as an inflated sense of their own importance and abilities. Narcissistic leaders tend to prioritize their own needs and interests over those of their employees, which can lead to negative outcomes for the workplace and its employees. They often micromanage employees, which can lead to feelings of stress, anxiety, and burnout.

Additionally, narcissistic leaders may take credit for their employees' work, which can lead to feelings of frustration and decreased motivation. Finally, narcissistic leaders may engage in unethical behavior, which can damage the reputation of the workplace and erode employee trust. Therefore, leader narcissism has been shown to be associated with more stressed employees.

Learn more about workplace here:

https://brainly.com/question/19965171

#SPJ11

Where should prepaid expenses and prepaid assets classify in? (Operating Assets, Financial Assets, Operating Liabilities, or Financial Liabilities)

Answers

Prepaid expenses and prepaid assets should be classified under Operating Assets.

Operating assets are a type of asset that a company uses to conduct its normal business operations. Prepaid expenses and prepaid assets are included in operating assets because they are assets that the company has paid for but have not yet received the goods or services to which they relate.

Therefore, prepaid expenses and prepaid assets should be classified under Operating Assets.

 On the other hand, financial assets are typically investments made by a company in financial instruments such as stocks, bonds, or derivatives. Operating liabilities represent the obligations or debts arising from a company's normal operations, such as accounts payable or accrued expenses. Prepaid expenses and prepaid assets do not fall under the categories of financial assets or operating liabilities.

To  learn more about prepaid expenses:  https://brainly.com/question/28995167

#SPJ11

Your portfolio is composed of 500 shares of Stock X, 2,500 shares of Stock Y, and 2,800 shares of Stock Z. Stock X has a beta of .45 and a price of $12.30 per share. Stock Y has a beta of .85 and a price of $57.47 per share. Stock Z has a beta of 1.95 and a price of $33.00 per share. What is the portfolio beta?
Multiple Choice
a.1.08
b.1.24
c.1.26
d.2.05
e.1.35

Answers

The portfolio beta is approximately 1.34. Therefore, the correct answer is e. 1.35.

To calculate the portfolio beta, we need to consider the individual betas of each stock and their respective weights in the portfolio. The formula to calculate the portfolio beta is as follows:

Portfolio Beta = (Weight of Stock X * Beta of Stock X) + (Weight of Stock Y * Beta of Stock Y) + (Weight of Stock Z * Beta of Stock Z)

First, let's calculate the weights of each stock in the portfolio:

Weight of Stock X = Number of shares of Stock X / Total number of shares in the portfolio = 500 / (500 + 2500 + 2800) = 0.08696

Weight of Stock Y = Number of shares of Stock Y / Total number of shares in the portfolio = 2500 / (500 + 2500 + 2800) = 0.43478

Weight of Stock Z = Number of shares of Stock Z / Total number of shares in the portfolio = 2800 / (500 + 2500 + 2800) = 0.47826

Now, we can calculate the portfolio beta:

Portfolio Beta = (0.08696 * 0.45) + (0.43478 * 0.85) + (0.47826 * 1.95)

= 0.03913 + 0.36957 + 0.93148

= 1.34

Therefore, the portfolio beta is approximately 1.34. Therefore, the correct answer is e. 1.35.

learn more about "portfolio ":- https://brainly.com/question/29509430

#SPJ11

Please include an explanation of exception analysisits
importance, and one real world example.

Answers

Exception analysts are specialists in data analytics that focus on investigating unusual data patterns that deviate from established standards. They assist in the identification of trends, unusual behaviors, and data inconsistencies.

The term "exceptions" refers to data observations that deviate from what is expected or typical. Exception analysis can be done for a range of applications such as fraud detection, supply chain management, cybersecurity, and risk management.

Exception analysis can be important in many areas including finance, IT, and retail. Exception analysis aids in the detection of anomalies or red flags that might indicate errors or possible threats in a system. It's critical because it allows companies to detect and respond to potential problems more quickly.

Exception analysis can help with risk management by assisting in the early detection of issues and identifying trends that indicate future problems. An organization can establish standards, identify exceptions, and compare them to the standard to detect irregularities in the data using exception analysis.

An example of exception analysis might be examining credit card activity to identify fraudulent transactions. Exception analysis would be critical in identifying deviations from regular credit card use patterns to identify and halt potential fraud.

For example, if a credit card user's data indicated that the user typically only spends $200 per month, but a transaction for $3,000 suddenly appeared, the exception analyst would investigate the transaction to determine if it was authorized.

To know more about Exception analysts, visit:

https://brainly.com/question/32419533#

#SPJ11

In the context of logistics and supply chain, the concept of a set of customer service goals to be achieved by the system within a specific product or market would define which one of the following strategic elements? a) mission b) vision c) d) task Question 3 (2 points) The calculation for direct product profitability (DPP) can take multiple steps to mathematically compute. However the first item of data comes from which area of business? a) marketing b) sales c) d) work package logistics operations

Answers

In the context of logistics and supply chain, the concept of a set of customer service goals is defined by the strategic element called "mission". The correct option is a). The first item of data required to calculate direct product profitability (DPP) typically comes from the area of business known as "operations". The correct option is d).  

The mission of a logistics and supply chain system represents its overall purpose, objectives, and the target customer service goals it aims to achieve. It defines the organization's reason for existence and provides direction for its activities and decision-making processes.

The mission statement typically outlines the scope of the system's operations, the markets it serves, and the value it seeks to deliver to its customers.

Direct product profitability is a financial metric that helps assess the profitability of individual products by considering the direct costs associated with producing and delivering them.

It takes into account factors such as manufacturing costs, raw material expenses, labor costs, and other operational expenses directly related to the production process. The operations department provides crucial data and information related to the costs incurred during the production and delivery of products.

This data includes factors like direct labor costs, direct material costs, and other operational expenses specific to the production process. By analyzing this data, organizations can calculate the direct product profitability and evaluate the financial performance of their products.

To know more about logistics and supply chain, refer to the link:

https://brainly.com/question/30452100#

#SPJ11

(a) What is the service rate per server in terms of customers per minute? (Round your answer to four decimal places.) -1 min MY NOTES A study of the multiple-server food-service operation at the Red Birds baseball park shows that the average time between the arrival of a customer at the food-service counter and his or her departure with a filled order is 12 minutes. During the game, customers arrive at the rate of five per minute. The food-service operation requires an average of 3 minutes per customer order. (b) What is the average waiting time (in minutes) in the line prior to placing an order? (Round your answer to two decimal places.) min (c) On average, how many customers are in the food-service system? (Round your answer to two decimal places.) Need Help? Read It ASK YOUR TEACHER PRACTICE ANOTHER

Answers

a. The service rate time is 1/3 customers per minute

b. The average waiting time is 9 minutes

c. 60 customers

How to determine the values

From the information given, we have that;

(a)

To calculate the service rate per server, let us find the time it takes to serve a customer.

The average time for delivery = 12 minutes.

The food-service operation=  3 minutes per customer order. T

Then,  average waiting time = 12 minutes - 3 minutes = 9 minutes.

Service rate per server= 1 customer served per (3 minutes/customer) = 1/3 customers per minute.

(c)

Using Little's Law, we have that;

Average number of customers in the food-service system = Arrival rate ×Average time spent in the system

= 5 customers per minute × (9 minutes + 3 minutes)

= 5 customers per minute × 12 minutes

Multiply the values

= 60 customers

Learn more about Little's law at: https://brainly.com/question/25827453

#SPJ4

Describe how your work has been geared towards enhancing your knowledge about yourself, enhancing your ability to diagnose aspects of self, and inculcating in you the practice of evaluating oneself. Describe two instances that indicated your leadership emergence. How did you lead after those incidents?

Answers

My work has been geared towards enhancing my knowledge about myself by studying psychology, counseling, and human development courses.

Through these courses, I have been able to learn about personality traits, emotions, and cognitive processes that are unique to individuals, and how these traits influence behavior, attitudes, and the way people interact with each other.I have also been able to diagnose aspects of self, such as strengths, weaknesses, biases, and values, by engaging in self-reflection, journaling, and meditation practices. These practices have enabled me to identify areas in which I need to grow, and have allowed me to work towards developing myself as a whole person.Furthermore, my work has inculcated in me the practice of evaluating myself by seeking feedback from peers, mentors, and supervisors. This feedback has been instrumental in helping me identify areas in which I need to improve, and has enabled me to learn from others and grow as a person.

Two instances that indicated my leadership emergence were when I was appointed as the team leader for a group project, and when I took charge of a work-related event.The first instance was when I was appointed as the team leader for a group project in my psychology class. I was able to identify each member's strengths and weaknesses, and delegate tasks accordingly. I made sure that everyone in the group was heard, and that everyone's ideas were taken into account. I also facilitated communication between group members and ensured that the project was completed on time and to a high standard.The second instance was when I took charge of a work-related event. I was able to manage the event smoothly, despite facing some unexpected challenges. I communicated effectively with all stakeholders, and ensured that everyone's needs were met.

To know more about human development courses visit:

https://brainly.com/question/30558333

#SPJ11

Dividends are paid when approved by the Select one: O A. shareholders. O B. management. O C. board of directors. O D. creditors.

Answers

Dividends are paid when approved by board of directors. The correct answer is C.

Dividends are payments made to shareholders as a distribution of the company's profits. They are approved and declared by the board of directors, who are responsible for making decisions regarding the company's financial matters, including the distribution of dividends to shareholders. Therefore, the board of directors approves the payment of dividends.

Dividends are payments made by a company to its shareholders as a way to distribute a portion of its profits. The decision to pay dividends is typically made by the board of directors, who act as representatives of the shareholders.

The board of directors plays a crucial role in overseeing the company's operations and making important financial decisions. When it comes to declaring and approving dividends, they consider various factors such as the company's financial performance, available cash reserves, future investment plans, and the interests of shareholders.

Before paying dividends, the board of directors assesses the financial health of the company to ensure that it has sufficient profits and cash flow to sustain the distribution. They also consider any legal requirements or restrictions on dividend payments. Once the board approves the dividend payment, it is typically communicated to the shareholders, who receive the dividends based on their ownership percentage or the number of shares they hold.

Overall, the board of directors holds the authority to approve dividends, acting in the best interests of the company and its shareholders. Their decision-making process involves careful analysis of financial factors and consideration of shareholder expectations.

To know more about Dividends refer here

brainly.com/question/28392301#

#SPJ11

what are some of the reasons that campaigns in california are expensive?

Answers

California is considered one of the most expensive states in the country when it comes to campaigning, with the cost of running for office increasing each year. There are several reasons that contribute to the high cost of campaigns in California, including High media costs:

In California, candidates must advertise on expensive television and radio stations, which are one of the main ways to reach a large number of voters. It is difficult to reach potential voters without using expensive media outlets.High population: California is the most populous state in the country, with over 39 million people. To reach as many voters as possible, candidates must conduct campaign events in various cities and towns throughout the state, which can be expensive.

Transportation: Campaigning in California requires candidates to travel long distances, and in a state as large as California, transportation costs can add up quickly. The candidates have to travel to various places and that costs a lot of money.High candidacy fees: In California, the candidacy fees are relatively high, and this excludes many candidates who cannot afford it. For example, the fee for running for governor is $3,916, and for U.S. Senator, it is $2,043. Candidates who are not able to pay these fees cannot be on the ballot and, therefore, cannot participate in the elections.

To know more about campaigning Visit:

https://brainly.com/question/32161257

#SPJ11

Other Questions
In what circumstances is the profitability index helpful?a. when the capital budget is less than the total initial cost of all possible projectsb. when the capital budget is less than the NPV of all positive NPV independent projects.c. When there are multiple IRRsd. When the capital budget is less than the total initial costs of all positive NPV independent projects. If f is continuous on [0, [infinity]), and if (x) da is convergent, then ff(x) da is convergent. True False EDW's new accountant takes over from another accountant to prepare the financials of the company. The new accountant agrees on the amounts reported for all current assets as prepared by the previous accountant without having a conversation with the prior accountant. Which characteristic does this situation embody? Question 5 options: a) Faithful representation b) Relevance c) Verifiability d) Comparability e) Timeliness Based on the data below calculate the company's annual holding cost?Annual requirements 7500 unitsOrdering cost BD 12Holding cost BD 0.5O a. 150O b. 300O c. 45000O d. 12.5 1. Banjo Education Corp. issued a 4%, $180,000 bond that pays interest semiannually each June 30 and December 31. The date of issuance was January 1, 2017. The bonds mature after four years. The market interest rate was 6%. Banjo Education Corp.s year-end is December 31.Required:Preparation Component:1. Calculate the issue price of the bond2. Required:Prepare a general journal entry to record the issuance of the bonds. Jan 1, 2017 - record the sold bonds on original issue date.3. Determine the total bond interest expense that will be recognized over the life of these bonds. (Do not round intermediate calculations. Round your answer to the nearest whole dollar.)4. Prepare the first two years of an amortization table based on the effective interest method Period Ending Cash Interest Paid Period Interest Expense Discount Amortization Unamortized Dis. Carrying Value5. Present the journal entries Banjo would make to record the first two interest payments. A 3.2 kg ball that is moving straight upward has 17 J of kinetic energy and its total mechanical energy is 25 J.A. Find the gravitational potential energy of the ball.B. What is its height above the ground?C. What is the speed of the ball? D. What will be its gravitational energy when it is at its highest point above the ground?E. What is its maximum height above the ground?F. What will be its speed just before it lands on the ground? this metal is more reactive than lithium and magnesium but less reactive than potassium. this elem is Assume that the Poisson distribution applies and at the mean number of hurricanes in a certain area is 7.2 per year.a. Find the probability that, in a year, there will be 6 hurricanes.b. In a 55 year period, how many years are expected to have 6 hurricanes?c. How does the result from part (b) compare to a recent period of 55 years in which seven years had six hurricanes? Does the Poisson distribution work while here? Seether Co. wants to issue new 19-year bonds for some much-needed expansion projects. The company currently has 8.4 percent coupon bonds on the market that sell for $1,101.16, make semiannual payments, and mature in 19 years. What coupon rate (as a APR) should the company set on its new bonds if it wants them to sell at par? (Note: the yield to maturity of the old bonds can be used as the coupon rate for the new bonds.) Having a user-friendly approach is the greatest strength of Tableau. a) True b) False. In July 2016, Sykick Software Company licenses it's accounting software to Rayhawk Corporation at a cost of $30,000 for two years and also enters into a contract to install the software for an additional $3,000. Trident sells the software license with or without installation. The accounting software is not modified or customized by the customer.Required: Prepare journal entry for Sykick to record this transaction assuming that installation will occur in July 2016 when RayHawk pays Sykick $33,000 per their agreement. A 60-year-old woman with a history of heart failure, substernal chest pain that awoke her from sleep, dysphagia when swallowing solids, odynophagia when swallowing both solids and liquids, a previous history of chest pain, and sharp pain occurring only after swallowing is seeking a diagnosis. Given her medication list, including metoprolol succinate, furosemide, potassium chloride, simvastatin, isosorbide dinitrate, and levothyroxine, which diagnostic approach or test is most likely to lead to the correct diagnosis? Stevenson's Bakery is an all-equity firm that has projected perpetual EBIT of $198,000 per year. The cost of equity is 14.1 percent and the tax rate is 34 percent. The firm can borrow perpetual debt at 5.8 percent. Currently, the firm is considering taking on debt equal to 108 percent of its unlevered value. What is the firm's levered value? Multiple Choice $1,364,604 $926,809 $1,096,971 O C $1,267,133 o $834,128 terry is 62 years old and alex is 52 years old. they are both expected to live 15 quality-adjusted life years (qalys). which statement is most likely true?a. terry and alex both have poor healthb. terry is a woman, alex is a manc. alex is confined to bedd. terry has perfect health which of the following practices led in part to the creation of jay's treaty between the united states and great britain in 1794? Count the number of strings of length 9 over the alphabet {a, b, c} subject to each of the following restrictions.(d) The first character is the same as the last character, or the last character is a, or the first character is a.(e) The string contains at least seven consecutive a's.(f) The characters in the string "abababa" appear consecutively somewhere in the 9-character string. (So "ccabababa" would be such a 9-character string, but "cababcaba" would not.)(g) The string has exactly 2 a's or exactly 3 b's. (h) The string has exactly 2 a's or exactly 2 b's or exactly 2 c's The study of buyer behaviour helps marketing managers better understand why people make purchases. To identify the target markets that may be most profitable for the firm, marketers use market segmentation, which is the process of separating, identifying, and evaluating the layers of a market to identify a target market. For instance, a target market might be segmented into two groups: families with children and families without children. Families with young children are likely to buy hot cereals and presweetened cereals. Families with no children are more likely to buy health-oriented cereals. Explain TWO (2) types of consumer market segmentation. Include an example of each types of segmentation to support your answer.Give me the details of answerGive me the details Both the Prisoner's Dilemma and Tragedy of the Commons tempt people to explain their own actions situationally and explain their partners' behavior dispositionally is called correlational research seeks to find usual or average values for specific variables, thus serving as a basis to evaluate and compare an individual against a similar group. a) true b) false Critically assess the strengths and weaknesses of BASEL I, II and III with respect to its objectives of enhancing financial stability in the banking sector.