Answer: You should have precaution
Explanation:
Which of the following aspects of building construction would a Geotechnical engineer be responsible for?
A.) Effects of tornadoes on structures
B.) Effects of wind speed on building designs
C.) Design of wastewater treatment facilities
D.) Design of underground garages
Answer:I would most likely say D, but I am unsure.
Explanation:
Though my answer might not be correct, a geotechnical engineer is a engineer that specializes in underground projects like tunnels, pipelines, and mines. I hope this helps.
Which of the following are characteristics of open fluid systems?
Constantly pressurized
Depends on a control valve
Enters a reservoir
Generates less heat
Answer:
The correct option is;
Depends on a control valve
Explanation:
An open fluid system is one in which the fluid is not meant to be reused but flows through the system only once, and the fluid is not stored or retained after use. Examples of an open fluid system includes an water flowing in a system used for irrigation, water used in a fire truck system, water supplied in the water utilities system
The fluid in an open fluid system is controlled with the aid of a control valve.
Answer:
Which of the following are characteristics of open fluid systems?
Your answer would be "C" Enters a reservoir !! :D
Explanation:
did it on EDGE 2021 got it right , here is an exact exerpt from EDGE \/ \/ \/
Open Fluid Systems
However, if the fluid leaves the actuator to enter a reservoir, and then fresh fluid leaves the reservoir to enter the pump, then this is an open-loop fluid system. Since the fluid enters a reservoir, the open-loop fluid system generates less heat and is often preferred by engineers over the closed-loop fluid system. Additionally, open-loop systems have no internal pressure when the motor or actuator is idle. Therefore, the motor or actuator must be engaged to create the internal pressure needed for fluid power systems.
In open fluid systems the fluid only flows through the system one time. Civil engineers who work with city water systems analyze open fluid systems.""
do you like soup vovovovovovovov
Answer:
yesssssssssss ma'ammmmmmmmm
Explanation:
fgty4th5e45
How do you find the needed gears and final gear ratio of a two stage transmission that will generate a speed of 15fps? The wheel diameter is 6 inches. And the motor has a RPM of 6380 and a torque of 4.69.
Explanation:
The gear ratio is calculated by dividing the output speed by the input speed (i= Ws/ We) or by dividing the number of teeth of the driving gear by the number of teeth of the driven gear (i= Ze/ Zs)
Help me out kinda confusing.
Answer:
Switch 1 and 3
Explanation:
only bell can pro sound energy, so we just need to make sure the bell within the closed circuit.
Answer:
switch 1 and 3
Explanation:
see attached
what are the possible problems of you are not wearing your PPE's while working?
Answer:
Without PPE, employees are at risk of:
Cuts and punctures. Chemical burns. Electric shocks. Exposure to excessive noise or vibration.
Explanation:
You can end up hurt,
Explanation:
Not wearing PPE can result in severe injury or death. In 2015-16 there were 144 fatalities in the workplace and some 621,000 non-fatal injuries. PPE such as hard hats, goggles, gloves and boots play a vital role in managing Health & Safety risks.
If you're not wearing safety glasses or goggles on the job, you're risking .
If you're not wearing safety glasses or goggles on the job, you're risking permanent eye damage and blindness. Think about all the work activities you may do each day that can cause eye injury: grinding, sanding, brushing, sawing, drilling, buffing, hammering, cutting, welding and working with chemicals.
1. Briefly state the use for each of the following types of engineered lumber : laminatedveneer lumber (LVL ), glue-laminated beams (glulams ), parallel - strand lumber (PSL) , and laminated strand lumber (LSL).
Answer:
see below
Explanation:
laminated veneer lumber (LVL)
It is typically used for headers, beams, rim board, and edge-forming material.glue-laminated beams (glulam)
glulam is an alternative to steel or concrete for constructing the roof of buildings such as swimming pools, sports halls and supermarkets. The laminating process allows a single, large structural member to be manufactured by laminating a number of smaller pieces of timberparallel - strand lumber (PSL)
PSL is a form of engineered wood made from parallel wood strands bonded together with adhesive.It is used for beams, headers, columns, and posts, among others uses.laminated strand lumber (LSL)
LSL is used primarily as structural framing for residential, commercial and industrial construction. Common applications of LSL in construction include headers and beams, tall wall studs, rim board, sill plates, millwork and window framing. LSL also offers good fastener-holding strength.PLZ HELPPPP WILL GIVE BRAINLIEST!!!!!
Can anyone help me with this welding assignment!
In the GMAW process, the electrode comes in what form?
What replaces flux in the GMAW process?
In the GMAW process, what two shielding gases are commonly used when welding on steel?
What welding organization has designated GMAW as the proper name for the wire feed welding process?
List two factors that could affect weld quality even before welding begins?
Answer:
hope this helps
Explanation:
Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) welding or metal active gas (MAG) welding, is a welding process in which an electric arc forms between a consumable MIG wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.
MIG welding, uses a continuously fed solid wire electrode that is used for filler metal that welds together two pieces of metal
Carbon dioxide in concentration of 1-2% is commonly used in the mix with argon to reduce the surface tension of the molten metal. Another common blend is 25% carbon dioxide and 75% argon for GMAW. Helium is lighter than air; larger flow rates are required. It is an inert gas, not reacting with the molten metals.
Gas metal arc welding (GMAW)
Welding Processes: The welding process is significant. ...
Base Metal Properties: Properties of the base metal affect welding performance
What is the Median Pay of Advertising, Promotions, or Marketing Managers?
$127,560 per year
$98, 459
$40,502
$75,272
Answer:
$127,560 per year
Explanation:
3/16 equals how many thirty-seconds?
Ratios contrast two figures by ordinarily dividing them. A/B would be your formula if you were comparing one data point (A) to another data point (B). This indicates that you are multiplying information A by information B.
What ways to calculate ratio digits into seconds?You may calculate the amount of time that has passed since the execution of a method by comparing the time values before and after it. The Instant class's now() method returns the Duration and the current time.
The simplest way to figure out how much time has passed is to count up in hours. By deducting the number of minutes in the earliest time from 60, first determine the number of minutes from that time to the following hour. Up until the hour before the end time, count the hours.
Therefore, 3/16 is equivalent to 6 30s. To get 6/32, multiply both digits in 3/16 by 2. For more details, log in.
Learn more about seconds here:
https://brainly.com/question/27266226
#SPJ2
Summarize the role of a structural engineer, including what the job entails, and identify three areas in which they work.
Answer:
The correct answer includes that structural engineering is a specialized branch of mechanical or civil engineering.
Explanation:
These engineers consider load and weight and that a structure must resist weather elements. Three areas they may work in include tall buildings, ports and harbors, and space structures.
Answer:
structural engineering is a specialized branch of mechanical or civil engineering. They consider load and weight and that a structure must resist weather elements. Three areas they may work in include tall buildings, ports and harbors, and space structures.
What is the significance of an extension line in an engineering drawing?
A.
the line shows the limits of a dimension
B.
the line shows dimensions not used in fabrication
C.
the line is perpendicular to the dimension line used to show a feature
D.
the line shows visible features of the figure
E.
the line shows hidden features of the figure
Answer:
c
Explanation:
c
What would your perfect Saturday be like? ...
Which movie sequel do you wish you could erase from history? ...
What would your perfect vacation entail? ...
What's a great book you've read recently? ...
What's the one food you could never bring yourself to eat? ...
What's your dream job? ...
Cake or pie?
Respond to this question if you’re really on Brainly because you’re in quarantine and you have nothing else to do
Answer:
I have nothing to do
Explanation:
I got homework to do,but I'm lazy
Which option identifies the type of engineer most likely to be involved in the following scenario?
Erica works closely with the Air Force, Army, Navy, and private companies in the armor business. The company she works for develops and markets molten-metal-handling equipment.
A.)industrial
B.)mechanical
C.)materials
D.)environmental
Answer:
industrial engineering
Answer:
industrial engineering
What weapon is at the center of the modern carrier battle group?
Answer:
Aircraft Carriers ofc!!
Explanation:
pls mark brainliest :)
What are the properties of an atom? I NEED HELP
Answer:
ummmmmmm
Explanation:
i learnt this last year but I can't remember
Answer: the thing spinning around is an electron, the stuff inside is protons and neutrons
Explanation: The stuff inside an atom has two protons and two neutrons. if you have noticed there are two "somethings" spinning around the atom, those are called an electrons
when you enroll in high school do they look at 8th grade grades during pandemics?
Answer:
Some school do and don't it all depends on the school.
Explanation:
Which of these would correct Sayid's error?
Change the heading of the chart to “Mechanical.”
Replace “travel in straight lines” with “move in curved paths.”
Add “move due to particles bumping into each other” to the chart.
Change “move only through matter” to “move through space and matter.”
Answer:
D. Change “move only through matter” to “move through space and matter.”
Hope this helps!
Explanation:
which of the following kinds of wood are classified as hardwood?
Hemlock,
redwood,
willow,
spruce
when using materials machinery
Fill in the blank with the correct responses
The blank
is a disposable micro camera used to take images of the digestive system
WILL GIVE BRAINLYIST!!!!!
Answer: capsule endoscopy camera
Explanation:
Answer:
The person above is correct?!!!!
Explanation:
Which sections should you survey while reading difficult material?
a. Diagrams
C. Main ideas
b. Visual Aids
d. All of these
Please select the best answer from the choices provided
Answer:
The answer is D
Explanation:
The sections that should you survey while reading difficult material may include diagrams, main ideas, visual aids, etc. Thus, the correct option for this question is D, i.e. all of these.
What are the points that one must observe in reading?The points that one must observe in reading may significantly include reading comprehension, vocabulary, phonics, fluency, Phonemic awareness, and many more. Each one of them possesses a different role in any literary work.
There are many elements that each and every reader must follow prior to reading. During the process of surveying, you must definitely focus on the diagram very first, This is because it interprets the complete information in a very short period of time. But main ideas and visual aids are equally important for the same process in order to understand the information briefly.
Therefore, the sections that should you survey while reading difficult material may include diagrams, main ideas, visual aids, etc. Thus, the correct option for this question is D, i.e. all of these.
To learn more about Reading strategies, refer to the link:
https://brainly.com/question/28831138
#SPJ2
Find the lowest common denominator for the following pairs of fractions.
4/32 and 5/8
Answer:
1/8 and 5/8
Explanation:
4/32 = 2/16 = 1/8
5/8 cannot be divided into any lowest common denominator
Analyze the example of this band saw wheel and axle. The diameter of the wheel is 14 inches. The diameter of the axle that drives the wheel is 3/4 inch. The actual force needed to cut through a one-inch-thick softwood board is 1.75 pounds. Consider the efficiency of this band saw to be 22%. Considering the efficiency of this system, calculate the actual mechanical advantage of the wheel and axle
Answer:
The actual mechanical advantage of the wheel and axle is approximately 4.1067
Explanation:
The given parameters are;
The diameter of the wheel = 14 inches
The diameter of the axle that drives the wheel = 3/4 inches
The force needed to cut a one-inch-thick softwood board = 1.75 pounds
The efficiency of the band saw = 22%
Mechanical advantage = Force output/Force input = Input distance/(Output distance)
Input distance/(Output distance) = 14/(3/4) ≈ 18.67
Mechanical advantage ≈ 18.67
Given that efficiency = Useful energy output/(Total energy input), we have;
Efficiency = 22% = 0.22 × Expected output, we have;
The actual mechanical advantage = 0.22 × 18.67 ≈ 4.1067
The actual mechanical advantage ≈ 4.1067
what others task at home requires you to wear personal protective equipments?
Answer:
cleaning the bathroom
Explanation:
what flies without wings?
If you competed in my others you will know the rules.Get it right all the good stuff. Wrong and get reported
Answer:
lol time flies
Explanation:
Answer:
Time
Explanation:
what type of transistor is controlled by voltage
Answer: a FET and a Bipolar Transistor
Any VOLTAGE signal used the junction transistor base circuit must be converted (or limited) to a current of suitable size using a resistor or other device. Hence the junction transistor is a current controlled device that can be made to operate with an input voltage and external circuit components.
Explanation:
Not really a Engineering person but I tried and answer correctly
yea yea yea yea yea yes no actually yes
Answer:
yes
Explanation:
Answer:no
Explanation:
Describe an online environment, give at least three indicators.
Answer:
The computer-mediated space in which online distance education occurs, often asynchronous and web-based.
It's indicators are:
1) Climate change
2) Fresh water resources
3) Air quality