Magnetic fields and electric fields are similar on the basis of the forces and its application.
What is an electric field?
An electric field is an electric property that is connected with any location in space where a charge exists in any form. The electric force per unit charge is another term for an electric field.
Magnetic and electric fields have certain similarities, are as follows;
1. Both the electric force and magnetic forces are the non-contact forces.
2. Both acts between the two entity having certain mass.
3. Both have their respective ranges.
Hence, magnetic fields and electric fields are similar on the basis of the forces and its application.
To learn more about the electric field, refer to the link;
https://brainly.com/question/26690770
#SPJ1
Compared with the atmosphere of venus, the martian atmosphere has.
Answer:
I think it would be 0.13. I'm not 100% sure.
At approximately what time would a first quarter moon rise?.
Answer:
the internet says it would be about noon
Explanation:
i dont know if its right but if it is could you please give me brainliest
A capacitor that uses 0. 40- mmmm -thick paper as a dielectric is charged to the maximum sustainable voltage. What is the strength of the induced electric field?
The maxiumum strength of the induced electric field in the capacitor that uses thick paper as dielectric material is 16 x 10⁶ V/m.
What is maximum electric field strength?
The maximum electric field strength above which an insulating material begins to break down and conduct is called its dielectric strength.
The dielelectric strength of paper is given as;
E = 16 MV/m = 16 x 10⁶ V/m
Thus, the maxiumum strength of the induced electric field in the capacitor that uses thick paper as dielectric material is 16 x 10⁶ V/m.
Learn more about dielectric strength here: https://brainly.com/question/27017570?source=archive
#SPJ1
the latent heat of fusion of a substance is the amount of energy associated with doing which of the following to 1 kg of the substance
A. Buring it completely
B. Raising its temperature 1 c
C. Boiling it at its boiling point
D Melting it at its melting point
Answer:Boiling at its boiling point
Explanation:
Hello please answer this I need it right now
Nonsense:report
Right answer:brainliest
Answer:
do you have an answer key
Explanation:
What is the initial velocity of the object represented by
the graph?
m/s
Velocity vs Time
1
2.
3
4
ch
5
Time (s)
Answer:
at t=0 , V = 5 so it's 5 m/s
Explanation:
it is 5. 5 is the answer.
Jonathan and Cody’s older brother Josh, who is pictured in the Figure below, is standing at the top of a half-pipe at Newton’s Skate Park. Gravity is exerting a downward force on the skateboard as seen in the picture. Why doesn’t it tip over the edge and start rolling down the side of the half-pipe?
In order to begin moving a Mass (Accelaration) will solve for the force required to move the skateboard. Mass(9.8) will give you the force needed to move the skateboard originally
What is acceleration ?Acceleration can be defined as the rate of change of velocity with respect to time, is a vector quantity associated with both magnitude and direction.
Acceleration can be up two types such as Uniform and Non-uniform acceleration, in a circle where speed remains constant but the direction is changing followed by velocity changes, and the body is said to be accelerated.
The average acceleration can be defined as the total change in velocity in the given interval period of time means the total time taken for the change. For a given interval of time, it is represented as ā.
Instantaneous acceleration can be defined as the ratio of change in velocity in a given time interval such that the time interval goes to zero.
For more details acceleration, visit
brainly.com/question/107797
#SPJ2
What is happening to the potential energy as the ice is melting
When ice is melting, there is a change in the energies in it. Its potential energy increases, but the thermal kinetic energy or temperature remains constant.
What is Melting?Melting is the process when a solid or liquid changes its state. Melting requires latent heat to convert its phase from solid to liquid or liquid to vapor.
Therefore, when ice is melting, Its potential energy increases.
Learn more about melting.
https://brainly.com/question/15873508
#SPJ
what is the kinetic energy of a 500 kg car moving at 18 m/s?
Answer:
81000 j
Explanation:
KE = 1/2 m v^2 = 1/2 500 18^2 =
What could Alex do to make the reaction happen faster than normal?
Answer:
Chris lives farther from the school than Alex lives, and Chris walked to school at a faster rate than Alex walked.
Explanation:
Can someone please answer this, ill give you brainliest Would be very appreciated.
Answer:
Option 3
Explanation:
As the roots of the plant hold soil in place, it helps prevent soil erosion.
The other options are true, but they are not correct explanations as to why plants help prevent erosion.
6. Which point on the skate park has the highest potential energy?
7. Which point on the skate park has the highest kinetic energy?
8. Where would the skater's speed be the fastest?
9. Where would the skater's speed be the lowest?
10. What you increasing the friction of the surface do to the skater's speed?
Answer:
6) Point G as it is the steepest.
7) Point G and F.
8) Between D and F.
9) Between C and D.
10) The skater will go slower with more friction and faster with less.
Explanation:
In an internal combustion engine, heat flow into a gas causes it to
.
Answer:
Along path BC of the Otto cycle, heat transfer Qh into the gas occurs at constant volume, causing a further increase in pressure and temperature. This process corresponds to burning fuel in an internal combustion engine, and takes place so rapidly that the volume is nearly constant.
The mass number of an isotope of uranium is 238, and its atomic number is 92. which symbol best represents this isotope of uranium? subscript 92 upper u. superscript 238 subscript 92 upper u. superscript 92 subscript 238 upper u. superscript 92 upper u.
The symbol that represents the isotope that has a mass number of 238, and an atomic number of 92 is 238 subscript 92 upper u.
What is an isotope?Isotopes are any of two or more forms of an element where the atoms have the same number of protons, but a different number of neutrons within their nuclei.
This means that isotopes possess different mass numbers but the same atomic number.
According to this question, the mass number of an isotope of uranium is 238, and its atomic number is 92. This means that the symbol of this isotope is as follows: 238/92 U.
Learn more about isotopes at: https://brainly.com/question/11680817
#SPJ4
Answer:
B. [tex]\frac{238}{92}[/tex] U
Explanation:
edge 2022
What is Sun flare ?
Investigation about Sun flare from NASA
Answer:
An powerful concentrated outburst of electromagnetic radiation in the Sun's atmosphere is known as a Sun flare. They are common in active regions, and they are typically accompanied by coronal mass ejections, solar particle events, and other solar phenomena.
a 50g sample decays to 6.25 g in 6hrs. what's the half life
Answer:
Nuclear half-life expresses the time required for half of a sample to
Explanation:
401.06
As people age, they become unable to control their cardiorespiratory fitness levels.
Answer:
False
Explanation:
A cannonball weighs 124.0 N in air, 89.0 N in salt water, and 30.0 N in an unknown liquid, Find the densities of the following: The cannonball, and the unknown liquid
The densities of the cannonball and the unknown liquid are 3.54kg/m³ and 2.686 kg/m³.
What is the buoyant force?When an object is fully or partially submerged in liquid, the vertical upward thrust is acting on the object, this force is called the buoyant force.
Salt Water exerts a buoyant force to the cannon ball = 124−89 = 35N, which equals the weight of water displaced.
The mass of water displaced is
W/g =35/10 =3.5 kg.
Since the density of salt water is 1kg/L, the volume displaced is 3.5L.
Therefore the density of the cannon ball is
=(124/10) /3.5 =3.54kg/L = 3.54kg/m³
The unknown liquid exerts a buoyant force of 124−30=94 N.
The density of this liquid is (94/10) /( 3.5 )=2.686 kg/liter = 2.686 kg/m³
Thus, the densities of the cannonball and the unknown liquid are 3.54kg/m³ and 2.686 kg/m³.
Learn more about buoyant force.
https://brainly.com/question/21990136
#SPJ1
The strength of the force of friction depends on which two factors?
O A. The objects' sizes and weights
O B. How hard the surfaces push together and the size of the object
C. How hard the surfaces push together and the types of surfaces
involved
о
D. The heat generated by the friction and the types of surfaces
involved
Options A and D are correct. The strength of the force of friction depends on the objects' sizes and weights and the heat generated by the friction and the types of surfaces involved.
What is the friction force?It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. its unit is Newton (N).
Mathematically, it is defined as the product of the coefficient of friction and normal reaction.
On resolving the given force and acceleration in the different components and balancing the equation gets. Components in the x-direction.
The strength of the force of friction depends on the two factors, as;
A. The objects' sizes and weights.
D. The heat generated by the friction and the types of surfaces involved.
Hence, options A and D are correct.
To learn more about the friction force, refer to the link;
https://brainly.com/question/1714663
#SPJ1
Forces (select all that apply) *
1:make objects move
2:have the unit of Newtons (N)
3:can be positive or negative in value
4:can go in any direction (North South East West)
Explanation:
1, 2,3, and 4 is correct.
Forces is a push or pull on an object. It can move an object.
Forces have a unit of Newton's
Force is a vector so it has direction meaning it can positive or negative, or north, South, East west
Why is red the last color seen at sunset?
A. It is bent by raindrops.
B. It is bent the most by the air.
C. It is scattered the least by the air.
D. It reflects off the atmosphere.
Answer: Within the visible range of light, red light waves are scattered the least by atmospheric gas molecules. So at sunrise and sunset, when the sunlight travels a long path through the atmosphere to reach our eyes, the blue light has been mostly removed, leaving mostly red and yellow light remaining.
Explanation:
what phrase describes scientific law
A phrase which describes a scientific law is: a statement of how volume is related to its temperature.
What is a scientific law?A scientific law is a type of scientific statement and it can be defined as a statement of fact that is generally and universally accepted to be true and verified because it has always been proven and observed to be true.
This ultimately implies that, a statement of how volume is related to its temperature is a phrase which describes a scientific law.
Read more on scientific law here: https://brainly.com/question/9368674
#SPJ1
Suppose that you had an electrically charged stick. If you divided the stick in half, each half would have half the original charge. If you split each of these halves, each piece would have a quarter of the original charge. Can you keep on dividing the charge in this manner forever
Because charge is quantized, the answer is no.
Can someone please answer this, ill give you brainliest Would be very appreciated.
Answer:
Fuel switching
Explanation:
Adaptation
It denotes to be changed according to the change happening in surroundingsIt also denotes not to run away from danger rather than adapting to live with the fear.We know fuel will be finished one day so we are shifting to new fuel sources.
I need severe help
a cat ran west for 30 meters and it took them 5 seconds, what was the average speed of the cat? Don’t forget units!
How long does it take jupiter to rotate on its axis.
Answer:
10 hours
Explanation:
A ringing bell is located in a chamber. when the air is removed from the chamber, why can the bell be seen vibrating but not be heard?
Answer:
sound requires a medium to be propagated
Explanation:
sound is a mechanical wave and thus requires a medium to be propagated. Air this case is a medium of travel for the ringing bell in the chamber that is why sound can be heard. When air in the chamber it becomes a vacuum that is why sound is not heard
Homes with multiple bathrooms have outlets connected in series with a red reset button in the system
Homes with multiple bathrooms have outlets connected in series with a red reset button in the system. The reason for this circuit design is to prevent electrocution.
What is red reset button?The water heater's reset switch provided on the upper thermostat of an electric water heater. If the button is on, the switch would have tripped and the reset is required.
To prevent any kind of injury or killing of a person by electric shock is called as the electrocution. This can be prevented only by outlets connected in series with a red reset button.
Thus, the reason for this circuit design is to prevent electrocution.
Learn more about red reset button.
https://brainly.com/question/7643711
#SPJ1
a ball on a string is swung overhead in a horizontal circle with a radius of 0.66 m. what speed (in m/s) does the ball need to maintain for there to be a centripetal acceleration of 23 m/s2?
Answer:
The ball is moving in a horizontal circle.
The force acting towards the center of the circle is
F = M a = M * V^2 / R
a = V^2 / R simplifying equation
V = (a / R)^1/2 = (23 / .66)^1/2 = 5.90 m/s
The block is pulled to a position xi = 6. 20 cm from equilibrium and released. Find the potential energy stored in the spring when the block is 6. 20 cm from equilibrium
The value of potential energy stored in the spring when the block is 6. 20 cm from equilibrium is 1.65 J.
What is elastic potential energy?The elastic potential energy is the energy which is stored in a stretched spring. The elastic potential energy of a spring can be found by the following formula.
[tex]U_s=\dfrac{1}{2}kx^2[/tex]
Here, (k) is spring constant and (x) is the displacement of the spring.
The block is pulled to a position xi = 6. 20 cm from equilibrium and released. Thus,
[tex]x=6.20\rm \; cm[/tex]
Divide with 100 to convert its unit in meter,
[tex]x=0.062\rm \; m[/tex]
Let the value of spring constant is 860 N/m. Thus, put the values in the formula,
[tex]U_s=\dfrac{1}{2}kx^2\\U_s=\dfrac{1}{2}(860)(0.062)^2\\U_s=1.65\rm\; J[/tex]
Thus, the value of potential energy stored in the spring when the block is 6. 20 cm from equilibrium is 1.65 J.
Learn more about the elastic potential energy here;
https://brainly.com/question/26497164
#SPJ4