Answer:
Radio telescopes are LARGER than optical telescopes and this is because radio wavelengths are much longer than optical wavelengths
Explanation:
In general radio telescopes are LARGER than optical telescopes and this is because radio wavelengths are much longer than optical wavelengths.
The main difference between radio telescopes and other telescopes especially optical telescopes is based on size and wavelength of both telescopes
Consider three identical light bulbs connected as shown in the circuit below.
a. Which light bulb(s) will be brightest? Explain.
b. What will happen to B and C if light bulb A is removed? Explain.
c. What will happen to A and B if light bulb C is removed? Explain.
Answer:
a.It is bulb A
b.They will have less light, because they are in series
c.It will have more light because all tge current will flow to one bulb which is A
a)Light bulb A will be brightest.
b)Because they are connected, they will have less light if light bulb A is removed.
c)Bulb A and B will light more. If light bulb C is removed.
What is an electric bulb?An electric bulb is a gadget that uses electricity to create visible light. It is the most popular type of artificial lighting and is necessary for modern society.
When one bulb in a series circuit burns, out, the rest of the bulbs will light. Hence, the following result is obtained;
a)Light bulb A will be brightest.
b)Because they are connected, they will have less light if light bulb A is removed.
c)Bulb A and B will light more. If light bulb C is removed.
To learn more about the electric bulb refer to the link;
brainly.com/question/4723473
#SPJ2
Can anyone help please
Answer:
d) Similar and joined in series
Explanation:
In a series combination of resistors, the current throughout the circuit remains the same, while the total voltage across the circuit is the sum of the voltage across each resistor connected in the circuit.
[tex]V_{Total} = V_{1}+V_{2}+V_{3}+...+V_{N}[/tex]
Now, if we consider that all the resistors are similar having rgw same value of resistance. So for the same value of resistance and current, the voltage drop across each resistor will also be the same.
[tex]V_{Total} = V+V+V+...+V(upto\ N\ resistors)\\V_{Total} = NV_{Resistor}\\V_{Resistor=}\frac{V_{Total}}{N}[/tex]
Hence, the correct option is:
d) Similar and joined in series
⦁ A certain resistor is required to dissipate 0.25 W, what standard rating should be used?
Answer:A
Explanation:
Helppp question in photo
Answer:
Its more likely to be wave D.
Explanation:
Light waves for violet are closer together than all other colors.
A tin can sinks when it is heated with a lid closed and then put cold water in it. why?
d. What is the net force on the bowling ball rolling lane
Answer:
Friction
Explanation:
which describes the attraction of one water molecule toward another
6. Applying Explain how scientists see what early galaxies looked like..
Answer: The younger elliptical and lenticular galaxies had results similar to spiral galaxies like the Milky Way. The researchers found that the older galaxies have a larger fraction of low-mass stars than their younger counterparts.
Explanation:
The concept of photons applies to which regions of the electromagnetic spectrum?
A. visible light only
B. infrared light, visible light, and UV light only
C. X-rays and gamma rays only
D. all regions of the spectrum
Answer:
D. all regions of the spectrum
Explanation:
I did some research ; )
if you use a 1500 watt sound system for 5 hours a day , calculate the amount of electricity used
Answer:
Our appliance and electronic energy use calculator allows you to estimate your ... using the formulas provided below; Installing a whole house energy monitoring system. ... energy consumption a few watt-hours, and you can use a monitor to estimate those too. ... Estimate the number of hours per day an appliance runs.
Explanation:
Circular Motion
Barbie is whirled in a horizontal circle on a 1.0 meter long string, such that the string makes a 10.° angle with the horizontal. Calculate Barbie's tangential speed
Please explain how to do it
Answer:
Explanation:
As the 1-meter string is at a 10° angle, the radius of horizontal circle Barbie is whirled will be = 1*cos(10°) meter.
Once the rotation speed is given, then multiple that by cos(10°) will be the tangential speed.
Answer:
Explanation:
cant calculate as no speed is given but the tangential speed is
= rotation speed x radius x cos 10.°
= rotation speed x cos 10.°
PLEASE HELPPPPPP <333
Answer:
Explanation:
The answer is c. I am very sure
Answer:
i think its b
Explanation:
im not very sure
If someone replenishes the tree population in a forest ecosystem, how
might this affect the producers already living there?*
Answer: Increase in competition for abiotic factors.
Explanation: Resource availability is one of the main factors determining the ecological dynamics of populations or species. Fluctuations in resource availability can increase or decrease the intensity of resource competition. Resource availability and competition can also cause evolutionary changes in life-history traits
A gun whose mass is 0.8 kg fires a bullet
whose mass is 0.016 kg with a velocity of
700 ms Calculate the velocity of the gun's
recoil
Answer:
14m/s
Explanation:
As per Newton's third law, the momentum of the bullet firing will equal the momentum of the guns recoil:
[tex]m_{g}v_{g} = m_{b}v_{b}[/tex]
(.8)v=(.016)(700)
v=11.2/0.8
v=14m/s
The unit called the____
is defined based on the amount of
work a horse can do in 1 minute.
The unit called horsepower is defined based on the amount of work a horse can do in 1 minute.
What is horsepower?James Watt used the horsepower unit for the first time in 1782. According to the account, James Watt used a pony to charge coal from the mines. According to the narrative, he needed a unit to measure the force of one of these animals.
He discovers that they can move 22.000 lbs per minute and decides to (arbitrarily) boost this metric by 50%. Having been the unit 33.000 lb/ft per minute, horsepower is an engine's output horsepower rating, whereas brake horsepower is an engine's input brake horsepower.
Brake horsepower measures an engine's power without accounting for power losses, whereas HP accounts for power losses. Horsepower of the brakes
Therefore, the horsepower unit is defined by the amount of work a horse can do in one minute.
To learn more about horsepower, refer to the link:
https://brainly.com/question/8652948
#SPJ2
An Atwood's machine consists of blocks of masses
m1 = 11.0 kg
and
m2 = 19.0 kg
attached by a cord running over a pulley as in the figure below. The pulley is a solid cylinder with mass
M = 7.90 kg
and radius
r = 0.200 m.
The block of mass m2 is allowed to drop, and the cord turns the pulley without slipping.
Answer:
Explanation:
Given that:
[tex]mass \ m_ 1 = 11.0 \ kg[/tex]
[tex]mass \ m_2 = 19.0 \ kg[/tex]
[tex]mass \ of \ the \ pulley\ M = 7.90 \ kg[/tex]
[tex]Radius \ of \ the \ pulley = 0.200\ m[/tex]
1) Provided that the mass in [tex]m_2[/tex] is greater than the mass we have in [tex]m_1[/tex], then likewise the tension we have in [tex]T_2[/tex] will be greater than the tension in [tex]T_1[/tex]
Using Newton's second law to mass [tex]m_1[/tex], we have:
[tex]m_2g - T_2 = m_2 a \\ \\ T_1 = m_1 g +m_1 a \\ \\ T_1= m_1 (g+a) --- (1)[/tex]
By using the second law, we have:
[tex]m_2g - T_2 = m_2a \\ \\ T_2 = m_2 (g-a)---(2)[/tex]
For the pulley, let's use the torque equation, so we have:
[tex]T_2 r -T_1 r = I \alpha \\ \\ T_2r -T_1r = \Big ( \dfrac{Mr^2}{2}\Big) \dfrac{a}{r} \\ \\ T_2 -T_1 = \dfrac{Ma}{2} ---- (3)[/tex]
Altogether, from equation (1)(2) and (3), we have:
[tex]m_2(g-a) -m_1 (g+a) = \dfrac{Ma}{2} \\ \\ m_2g -m_2a -m_1g-m_1a = \dfrac{Ma}{2} \\ \\ a = \dfrac{(m_2 -m_1) g}{(m_1 + m_2 + \dfrac{M}{2})} \\ \\ a = \dfrac{(19.0 \ kg - 11.0 \ kg ) ( 9.8 \ m/s^2)}{(19.0 \ kg + 11.0 \ kg + \dfrac{7.90 \ kg }{2} )}[/tex]
[tex]a = 2.31 \ m/s^2[/tex]
Also; from equation (1), the tension in the string is:
[tex]T_1[/tex] = (11.0 kg ) ( 9.8 + 2.31) m/s²
[tex]T_1[/tex] = 133.21 N
[tex]T_1[/tex] ≅ 133 N
From equation (2):
[tex]T_1[/tex] = m_2(g-a)
[tex]T_1[/tex] = (19.0 kg) ( 9.8 - 2.31) m/s²
[tex]T_1[/tex] = 142.31 N
[tex]T_1[/tex] = 142 N
A small wooden block with mass 0.750 kg is suspended from the lower end of a light cord that is 1.40 m long. The block is initially at rest. A bullet with mass 0.0100 kg is fired at the block with a horizontal velocity v0. The bullet strikes the block and becomes embedded in it. After the collision the combined object swings on the end of the cord. When the block has risen a vertical height of 0.800 m, the tension in the cord is 5.00 N.
Required:
What was the initial speed v0 of the bullet?
Answer:
The initial speed of the bullet will be:
[tex]v_{ib}=331.36\: m/s[/tex]
Explanation:
Using the momentum conservation:
[tex]p_{i}=p_{f}[/tex]
[tex]m_{b}v_{ib}=Mv[/tex] (1)
Where:
M is the mass of the black plus the mass of the bulletv(ib) is the initial velocity of the bulletv is the velocity of the block with the bullet inside.Using the conservation of energy:
[tex]\frac{1}{2}Mv^{2}=\frac{1}{2}Mv_{2}^{2}+Mgh [/tex] (2)
Where v(2) is the speed of the system at 0.8 m of vertical height.
Using the forces acting on the system we can find v(2).
The forces can be equal to the centripetal force:
[tex]T-Mg*sin(\alpha)=M\frac{v_{2}^{2}}{L}[/tex]
α is the angle of T with respect to the horizontal, here α = 25.4°
So, v(2) will be:
[tex]T-Mg*sin(\alpha)=M\frac{v_{2}^{2}}{L}[/tex]
[tex]\frac{L}{M}(T-Mg*sin(\alpha))=v_{2}^{2}[/tex]
[tex]\frac{1.4}{0.76}(5-0.76*9.81*sin(25.4))=v_{2}^{2}[/tex]
[tex]v_{2}=1.82 \: m/s[/tex]
Using this value on equation (2) we will find v.
[tex]v^{2}=v_{2}^{2}+2gh [/tex]
[tex]v^{2}=1.82^{2}+2(9.81)(0.8) [/tex]
[tex]v=4.36\: m/s [/tex]
And finally using equation (1) we can find the initial speed of the bullet.
[tex]m_{b}v_{ib}=Mv[/tex]
[tex]0.01*v_{ib}=0.76*4.36[/tex]
[tex]v_{ib}=331.36\: m/s[/tex]
I hope it helps you!
Please answer all three answers
Answer:
I. The rock that has the most kinetic energy is rock 3.
II. Rock 3 has the most kinetic energy because it weighs the highest among the rocks i.e it has the highest amount of mass. Also, the mass of an object is directly proportional to the kinetic energy possessed by the object; the higher the mass, the higher the kinetic energy.
III. Kinetic energy is taking place rather than potential energy because the rocks are in motion i.e rolling down a hill.
Explanation:
Energy can be defined as the ability (capacity) to do work. The two (2) main types of energy are;
a. Gravitational potential energy (GPE): it is an energy possessed by an object or body due to its position above the earth.
b. Kinetic energy (KE): it is an energy possessed by an object or body due to its motion.
Mathematically, kinetic energy is given by the formula;
[tex] K.E = \frac{1}{2}MV^{2}[/tex]
Where;
K.E represents kinetic energy measured in Joules.
M represents mass measured in kilograms.
V represents velocity measured in metres per seconds square.
From the above, we can deduce the following;
I. The rock that has the most kinetic energy is rock 3.
II. Rock 3 has the most kinetic energy because it weighs the highest among the rocks i.e it has the highest amount of mass. Also, the mass of an object is directly proportional to the kinetic energy possessed by the object; the higher the mass, the higher the kinetic energy.
III. Kinetic energy is taking place rather than potential energy because the rocks are in motion i.e rolling down a hill.
why do dzongs have broader base?
Answer:
The base of taller buildings are made broader because it reduces the pressure exerted on the ground so that they do not sink in due to the extremely high pressure of the building.
Explanation:
hope thiss helpss~!
A broad base is used to engage or recruit a diverse range of individuals to broad-based environmentalism.
Broader base:The broader base is a base of taller structures was built wider to reduce the pressure placed on the floor.It preventing the ground from sinking due to the house's extremely high tension.This structures have a wider base because the pressure is inversely proportional to area.That's why the increasing the area reduces the pressure or we can that the structure would not fall apart.Find out more about the broader base here:
brainly.com/question/14313691
During a soccer game, a player grabs and holds an opponent's shirt outside of the penalty box. After the foul is called, what kick is awarded to put the ball back into play?
a
Penalty Kick
b
Indirect Free Kick
c
Kickoff
d
Direct Free Kick
what is microeconomic
6.
3. A 7.6 kg object is pulled 6.0 m at a constant
velocity of 5.0 m/s along a horizontal surface by
a force of 2.0 N. What is the work done on the
object to overcome friction?
Answer:
12 J
Explanation:
From the question given above, the following data were obtained:
Mass (m) = 7.6 kg
Distance (d) = 6 m
Velocity (v) = 5 m/s
Force (F) = 2 N
Workdone (Wd) =.?
Workdone can be defined as the product of force and distance moved in the direction of the force. Mathematically, it is expressed as:
Workdone = Force × distance
Wd = F × d
With the above formula, we can obtain the workdone as follow:
Distance (d) = 6 m
Force (F) = 2 N
Workdone (Wd) =.?
Wd = F × d
Wd = 2 × 6
Wd = 12 J
Thus, the workdone is 12 J
IM BEGGING ILL GIVE BRAINLEST PLEASEEEEEEE HELP ME Distance and amount of charge are factors that determine which of the
following quantities?
A. Electrostatic force
B. Electric potential
C. Electric potential energy
D. All of the above
Explanation:
Distance and amount of charge are factors that determine which of the
following quantities?
D. All of the above
3. Jose and Luke raced as they climbed to the top of the bleachers. Jose reached the top in 12.6 s and
Luke reached the top in 13.3 s. Jose and Luke have the same mass,
Who did more work?
How do you know?
Who had more power?
How do you know?
Answer:
jose
Explanation:
Jose run faster and did more work
because the time Jose took to accomplish the activity is less than Luke
both
both have same mass
The work done by both Jose and Luke is same because the change in potential energy is same.
The power of Jose is greater than than of Luke because Jose takes less time to do the same work.
What is power?Power is defined in physics as the amount of energy transferred or converted per unit time. The watt is the unit of power in the International System of Units, equal to one joule per second. Power is sometimes referred to as activity in older works. A scalar quantity is power.
Let the mass of each of them is m.
Hence, work done by each of them = mgh ( same for both of them)
As Jose reached the top in 12.6 s and Luke reached the top in 13.3 s.
Power of Jose = mgh/12.6
Power of Luck = mgh/13.3
Hence, Power of Jose is greater than Power of Luck.
Learn more about power here:
https://brainly.com/question/29575208
#SPJ2
Which combination of alleles would produce a recessive trait?
TT
tt
or Tt
In the winter activity of tubing, riders slide down snow covered slopes while sitting on large inflated rubber tubes. To get to the top of the slope, a 2.50 kg tube, is pulled at a constant speed by a tow rope that maintains a constant tension of 12.0 N along the direction of the slope. How much thermal energy is created in the slope and the tube during the ascent of a 6.31-m-high, 52.3-m-long slope, in Joule
Answer:
≈ 473 J
Explanation:
m ( mass ) = 2.5 kg
T ( tension ) = 12 N
v = constant
h ( height ) = 6.31 m
d ( diameter ) = 52.3 m
Determine how much thermal energy is created
considering that external force acts on the system
ΔE = W and this can be rewritten as
mgh + ΔEth = W --------- ( 1 )
where ΔEth = amount of thermal energy created
also ; W = Fd cos ∅, hence Work done by Tension force (w) = Td cos 0 = Td
back to equation ( 1 )
mgh + ΔEth = Td
ΔEth = Td - mgh
= ( 12 * 52.3 ) - ( 2.5 * 9.8 * 6.31 )
≈ 473 J
Most stars consist of what
percentage of hydrogen?
A. 65%
B. 73%
C. 81%
D. 88%
how did we compensate for friction ?
A 10.0 N package of whole wheat flour is suddenly placed on the pan of a scale such as you find in grocery stores. The pan is supported from below by a vertical spring of force constant 395 N/m. If the pan has negligible weight, find the maximum distance the spring will be compressed if no energy is dissipated by friction.
Answer:
0.025 m
Explanation:
From the question,
Applying Hook's law
F = ke................... Equation 1
Where F = Force, k = spring constant of the scale, e = maximum distance at which the spring will compress.
make e the subject of the equation
e = F/k....................... Equation 2
Given: F = 10 N, e = 395 N/m
Substitute these values into equation 2
e = 10/395
e = 0.025 m
Priscilla is driving her car on a busy street and Harvey passes her on his motorcycle. What will happen to the sound from his motorcycle after it passes her car?
A.
The frequency of the sound will decrease.
B.
The amplitude of the sound will increase.
C.
The intensity of the sound will increase.
D.
The wavelength of the sound will decrease.
E.
The velocity of the sound will increase.
Answer:
the correct answer is A
Explanation:
This is a doppler effect exercise which is the change in frequency due to the relative movement of the sound source and the observer.
[tex]f' = f_o \ \frac{v+v_o}{v-v_s}[/tex]
where v₀ is the speed of the observer and v_s the speed of the source, the signs correspond when the two are closing in
with this expression let's analyze the different answers
A) True. The observed change is in the frequency, in this case the two are moving away, so the expression that describes the phenomenon is
[tex]f'= f_o \ \frac {v-v_o}{ v+v_s}[/tex]
In this case, the speed of the source is greater than the speed of the observer, so when the denominator increases faster than the numerator, consequently the frequency must decrease
B) False. The amplitude does not depend on the relative velocity
C) False. The intensity depends on the distance, by or which when increasing the distance the intensity should decrease
D) False. The speed of sound is a constant, if the frequency decreases the wavelength must increase to maintain equality
E) False. The speed of sound depends on the properties of the propagating medium, not on the relative speed of the source and the observer.
Consequently the correct answer is A