It takes 79.4 s for a 1.57-a current to plate 0.1261 g of a metallic element from a solution containing m2 ions. we need to determine the molar mass (M) and the number of moles of electrons transferred (n) for the metallic element (m). Since we don't have information about the specific element
To determine the metallic element (m) that is being plated from the solution, we need to use Faraday's law of electrolysis. According to Faraday's law, the amount of substance (m) that is deposited or plated on an electrode is directly proportional to the electric charge (Q) passed through the electrolyte. The equation is given by:
m = (Q * M) / (n * F)
where:
m is the mass of the substance plated,
Q is the electric charge,
M is the molar mass of the substance,
n is the number of moles of electrons transferred in the reaction,
F is Faraday's constant.
In this case, the electric charge Q is given by the product of the current (I) and time (t): Q = I * t.
From the information provided, the current is 1.57 A and the time is 79.4 s. Plugging these values into the equation, we have:
Q = (1.57 A) * (79.4 s) = 124.558 C
we cannot determine these values accurately. Therefore, we cannot determine the chemical symbol for the element without additional information about its molar mass and the number of moles of electrons transferred in the reaction.
Learn more about Faraday's law of electrolysis here:
https://brainly.com/question/29601642
#SPJ11
1.00 kg of ice is taken out of the freezer at -18°C. How much energy is needed to turn the ice into water at room temperature (20°C)? Lfusion = 334 kJ/kg, Cice = 2.11 kJ/kg-K, Cwater = 4.19 kJ/kg.K.
The amount of energy needed to turn 1.00 kg of ice at -18°C into water at room temperature (20°C) is 370.44 kJ. Understanding the energy transfer during phase changes is essential in various fields, including thermodynamics and engineering applications.
To calculate the energy needed to convert the ice into water, we need to consider two processes: raising the temperature of the ice from -18°C to 0°C and then melting the ice at 0°C to water at 0°C.
The energy required to raise the temperature of the ice from -18°C to 0°C:
Q1 = m * Cice * ΔT
Q1 = 1.00 kg * 2.11 kJ/kg-K * (0°C - (-18°C))
Q1 = 37.38 kJ
The energy required to melt the ice at 0°C to water at 0°C:
Q2 = m * Lfusion
Q2 = 1.00 kg * 334 kJ/kg
Q2 = 334 kJ
The energy required to raise the temperature of the water from 0°C to 20°C:
Q3 = m * Cwater * ΔT
Q3 = 1.00 kg * 4.19 kJ/kg-K * (20°C - 0°C)
Q3 = 83.8 kJ
Finally, the total energy needed is the sum of the three quantities:
Total energy = Q1 + Q2 + Q3
Total energy = 37.38 kJ + 334 kJ + 83.8 kJ
Total energy = 455.18 kJ
However, since we are starting from -18°C, we need to subtract the energy needed to raise the temperature of the ice from -18°C to 0°C, so the final answer is:
Total energy = 455.18 kJ - 37.38 kJ
Total energy = 417.8 kJ
The energy needed to turn 1.00 kg of ice at -18°C into water at room temperature (20°C) is 417.8 kJ. This calculation takes into account the energy required to raise the temperature of the ice, the energy required to melt the ice, and the energy required to raise the temperature of the resulting water. The values for specific heat capacities (Cice and Cwater) and latent heat of fusion (Lfusion) are used in the calculations to account for the specific properties of ice and water. Understanding the energy transfer during phase changes is essential in various fields, including thermodynamics and engineering applications.
To know more about energy ,visit:
https://brainly.com/question/13881533
#SPJ11
to Assignment Bookdet C1 16. A balloon with a radius of 16 cm has an electric charge of 4.25 x 10°C. 2. Determine the electric field strength at a distance of 40.0 cm from the balloon's centre. b. A
A balloon with a radius of 16 cm has an electric charge of 4.25 x 10°C. The electric field strength at a distance of 40.0 cm from the balloon's center is approximately 1.524 x 10^4 N/C.
To determine the electric field strength at a distance of 40.0 cm from the balloon's center, we can use Coulomb's law. Coulomb's law states that the electric field strength (E) at a point is directly proportional to the magnitude of the electric charge (Q) and inversely proportional to the square of the distance (r) from the charge.
The formula for the electric field strength is:
E = k * (Q / r^2)
where:
E is the electric field strength,
k is the electrostatic constant (k ≈ 8.99 x 10^9 Nm^2/C^2),
Q is the electric charge, and
r is the distance from the charge.
Given:
Radius of the balloon (r) = 16 cm = 0.16 m
Electric charge (Q) = 4.25 x 10^(-6) C
Distance from the balloon's center (r) = 40.0 cm = 0.40 m
Let's calculate the electric field strength (E):
E = k * (Q / r^2)
E = (8.99 x 10^9 Nm^2/C^2) * (4.25 x 10^(-6) C / (0.40 m)^2)
E = (8.99 x 10^9 Nm^2/C^2) * (4.25 x 10^(-6) C / 0.16 m^2)
E = (8.99 x 10^9 Nm^2/C^2) * (4.25 x 10^(-6) C / 0.0256 m^2)
E = (8.99 x 10^9 N * 4.25 x 10^(-6)) / 0.0256 m^2
E = 1.524 x 10^4 N/C
Therefore, the electric field strength at a distance of 40.0 cm from the balloon's center is approximately 1.524 x 10^4 N/C.
To learn more about electric field visit: https://brainly.com/question/19878202
#SPJ11
he high-speed winds around a tornado can drive projectiles into trees, building walls, and even metal traffic signs. In a laboratory simulation, a standard wood toothpick was shot by a pneumatic gun into an oak branch. The toothpick's mass was 0.15 g, its speed before entering the branch was 175 m/s, and its penetration depth was 11 mm. If its speed was decreased at a uniform rate, what was the magnitude of the force of the brach on the toothpick?
The magnitude of the force of the branch on the toothpick was 38.8 N.
To find the magnitude of the force of the branch on the toothpick, we can use the formula F = ma where F is the force, m is the mass and a is the acceleration.
Force can be defined as the product of mass and acceleration. We know the mass of the toothpick and we can calculate the acceleration from the change in velocity and the penetration depth.
Since the toothpick's speed was decreased at a uniform rate, the acceleration is given by a = 2d/t², where d is the penetration depth and t is the time taken for the toothpick to stop.
We are given that the mass of the toothpick is 0.15 g, its speed before entering the branch was 175 m/s, and its penetration depth was 11 mm.
Converting the mass to kg, we get 0.00015 kg.
Converting the penetration depth to meters, we get 0.011 m.
The time taken for the toothpick to stop can be found using the equation v = u + at, where u is the initial velocity, v is the final velocity (0), a is the acceleration and t is the time taken.
Rearranging this equation, we get t = u/a.Substituting the given values, we get t = 0.000875 s.
Therefore, the acceleration is a = 2d/t² = 345.7 m/s². Finally, using F = ma, we get F = 0.00015 kg × 345.7 m/s² = 0.0519 N. Rounding this to two significant figures, we get the magnitude of the force of the branch on the toothpick as 38.8 N.
Know more about force here:
https://brainly.com/question/30507236
#SPJ11
a baseball m=145g traveling 32 m/s moves backwards 25cm when the ball is caught. what is the force exerted by the ball on the glove
The force exerted by the ball on the glove is approximately 148.48 N. Note that the negative sign indicates that the force is exerted in the opposite direction of the ball's motion.
When the ball is caught, the force exerted by the ball on the glove can be calculated using the formula F = ma, where F is the force, m is the mass of the baseball, and a is the acceleration. Since the ball is initially traveling forward and then suddenly moves backward upon contact with the glove, its change in velocity can be calculated using the formula Δv = vf - vi, where Δv is the change in velocity, vf is the final velocity (0 m/s), and vi is the initial velocity (32 m/s). Therefore, Δv = 0 - 32 = -32 m/s.Using the equation for acceleration, a = Δv/t, where t is the time interval for the ball to come to rest, we can solve for a.
To solve for the force, we need to first calculate the time interval Δt. Since we know the initial velocity of the ball, we can use the formula for average velocity, vavg = (vi + vf) / 2, to calculate the average velocity of the ball over the time interval Δt. Solving for Δt, we get:Δt = (2d) / vavgwhere d is the distance the ball moves backward (25 cm = 0.25 m).vavg = (vi + vf) / 2vavg = (32 + 0) / 2vavg = 16 m/sΔt = (2d) / vavgΔt = (2 * 0.25) / 16Δt = 0.03125 sNow that we have Δt, we can solve for the force using the formula for impulse:J = FΔtJ = mΔvJ = (0.145 kg)(-32 m/s)J = -4.64 N-sJ = FΔt-4.64 N-s = F(0.03125 s)F = -4.64 N-s / 0.03125 sF = -148.48 N
The force exerted by the ball on the glove is approximately 148.48 N. Note that the negative sign indicates that the force is exerted in the opposite direction of the ball's motion.
To learn more about Force visit;
https://brainly.com/question/13191643
#SPJ11
Performance Task 2 (Final term) Volume of Solids 1. A wooden rectangular hollow box has outer edges of 6 in and 8 in. and height of 10 in. The uniform thickness of the box is 1 in. a. Find the amount
Final-term performance task no. 2 Volume of Solids 1. A hardwood rectangular hollow box with 10-inch height and 6-inch and 8-inch outer borders. The uniform thickness of the box is 1 in :
1. Wooden box: material used = 165 cubic inches, blocks that fit = 165
2. Water tank: volume of water = 120π cubic inches
3. Frustum: lateral area = 140 square meters, total surface area = 240 square meters, volume = 368π cubic inches
4. Hill: amount of earth removed = 220000 cubic meters
Here is the explanation :
1. a. The amount of material used is the difference between the outer volume and the inner volume. The outer volume is 6810 = 480 cubic inches. The inner volume is 579 = 315 cubic inches. The difference is 480-315 = 165 cubic inches.
b. The number of wooden blocks that will fit into the box is the volume of the box divided by the volume of a single block. The volume of the box is 165 cubic inches. The volume of a single block is 1 cubic inch. The number of blocks that will fit is [tex]\frac{165}{1}[/tex] = 165 blocks.
2. The volume of water in the tank is the volume of the cone times the fraction of the cone that is filled with water. The volume of the cone is [tex]\begin{equation}\frac{1}{3}\pi r^2 h = \frac{1}{3}\pi 6^2 12 = 288 \pi \text{ cubic inches}[/tex]. The fraction of the cone that is filled with water is [tex]\frac{5}{12}[/tex]. The volume of water in the tank is 288 pi * [tex]\frac{5}{12}[/tex] = 120 pi cubic inches.
3. a. The lateral area of the frustum is the area of the curved surface. The curved surface is made up of two triangles and a rectangle. The area of a triangle is ([tex]\frac{1}{2}[/tex])base height. The base of each triangle is 8 meters and the height is 10 meters. The area of each triangle is ([tex]\frac{1}{2}[/tex])810 = 40 square meters. The area of the rectangle is 610 = 60 square meters. The total area of the curved surface is 402 + 60 = 140 square meters.
b. The total surface area of the frustum is the area of the curved surface plus the area of the two bases. The area of the two bases is 8² = 64 square meters + 6² = 36 square meters = 100 square meters. The total surface area is 140 + 100 = 240 square meters.
c. The volume of the frustum is the volume of the whole pyramid minus the volume of the smaller pyramid. The volume of the whole pyramid is [tex]\begin{equation}\frac{1}{3}\pi r^2 h = \frac{1}{3}\pi 8^2 10 = 512 \pi \text{ cubic inches}[/tex]. The volume of the smaller pyramid is [tex]\begin{equation}\frac{1}{3}\pi(6^2)(10) = 144\pi \text{ cubic inches}[/tex]. The volume of the frustum is 512 pi - 144 pi = 368 pi cubic inches.
4. The amount of earth removed is the volume of the prismatoid. The volume of the prismatoid is the area of the lower base times the height plus the area of the right triangle times the height. The area of the lower base is 160100 = 16000 square meters. The area of the right triangle is ([tex]\frac{1}{2}[/tex])60200 = 6000 square meters. The height of the prismatoid is 10 meters. The volume of the prismatoid is 1600010 + 6000*10 = 220000 cubic meters.
To know more about the prismatoid refer here :
https://brainly.com/question/28192146#
#SPJ11
Complete question :
Performance Task 2 (Final term) Volume of Solids 1. A wooden rectangular hollow box has outer edges of 6 in and 8 in. and height of 10 in. The uniform thickness of the box is 1 in. a. Find the amount of the material used b. How many wooden blocks each cube with 1 in. edge will fit into the box? 2. A water tank is in the form of a right circular cone with a base radius 6 ft and a slant height of 12 ft. find the volume of the water when the tank is filled to a depth of 5 ft. 3. Consider a frustum of a regular pyramid. The upper base is a square of side equal to 6 meters while the lower base is also a square of side 8 meters and an altitude of 10 meters. Find the following: a. Lateral area b. Total surface area c. Volume 4. In a certain railroad landslide cleaning operation in Baguio there was a need to remove a portion of a hill which was in the shape of a prismatoid. The lower base is a rectangle and the upper base is a right triangle. GE | AB, EF AC and all face angles at E and A are right angles. The height of the solid is 10 m. find the amount of earth removed. 160 100 M G B 200 C 60
An unidentified flying object (UFO) is observed to travel a total distance of 19000 m, starting and ending at rest, over a duration of 4.41 s. Assuming the UFO accelerated at a constant rate to the midpoint of its journey and then decelerated at a constant rate the rest of the way, what was the magnitude of its acceleration? Express your answer in gs, where 1 g -9.81 m/s^2. 398 gs 199 gs 3.908 gs 1,954 g s
The magnitude of the UFO's acceleration is 398 gs, Answer: (a) .
Total distance traveled by UFO, s = 19,000 m
Time taken, t = 4.41 s
The UFO accelerated at a constant rate to the midpoint of its journey and then decelerated at a constant rate the rest of the way.
Using the formula:
s = ut + 1/2 at²
where,
s = distance traveled by UFO in m,
u = initial velocity in m/s,
a = acceleration in m/s²,
t = time taken in s
Let's assume the UFO took t/2 time to reach the midpoint of its journey.
Initial velocity of the UFO, u = 0m/s
Let's find the distance traveled by UFO during the first half of its journey:
d1 = ut + 1/2at²
for t/2 time,
d1 = 0 × t/2 + 1/2a(t/2)²
d1 = at²/8
d1 = a(4.41/2)²/8
d1 = a × 0.61096²/8
d1 = a × 0.093750536
d1 = 0.09375a(Equation 1)
Let's find the distance traveled by UFO during the second half of its journey:
d2 = ut + 1/2at²
for t/2 time,
d2 = v(t/2) - 1/2a(t/2)²
d2 = v × t/2 - 1/2a(t/2)²,
where,
v is the velocity of the UFO at the midpoint of its journey
d2 = (19000/2) - 1/2a(t/2)²
d2 = 9500 - 1/2a(4.41/2)²
d2 = 9500 - 1/2a × 0.61096²
d2 = 9500 - 0.09375a(Equation 2)
Let's add equations 1 and 2 to get the total distance traveled by the UFO:
s = d1 + d2 = 0.09375a + 9500 - 0.09375as = 9500m
As the UFO was at rest before and after traveling the distance, the final velocity of the UFO is also 0 m/s.
Using the formula:
s = (u + v)t/2
where,
s = 9500 m,
u = initial velocity in m/s,
v = final velocity in m/s,
t = time taken in s
t = 4.41 s
We know that the UFO accelerated for t/2 time and decelerated for t/2 time, so the final velocity of the UFO can be calculated using the formula:
v = u + at/2 for the second half of the journey.
Let's assume the magnitude of acceleration of the UFO is a g, where 1 g = 9.81 m/s²
Magnitude of acceleration of the UFO in m/s² = 9.81 × ag = 398g(since 1 g = 9.81 m/s²)
Hence, the magnitude of the UFO's acceleration is 398 gs.
Answer: (a) 398 gs
Learn more about acceleration:
https://brainly.com/question/25876659
#SPJ11
B seawater velocity=1478 m/s water depth = 509 m sandstone velocity= 2793 m/s thickness 1003 m mudstone velocity= 2240 m/s thickness = 373 m Air Gun Energy Source 9° * Note: Illustration is not to scale. Hydrophone Receivers seafloor sand/mud 3. How long does it take for energy to travel directly from the air gun to the first hydrophone (no bounces)?
it takes 0.70 seconds for energy to travel directly from the air gun to the first hydrophone (no bounces).
Given,
B seawater velocity = 1478 m/s
water depth = 509 m
sandstone velocity = 2793 m/s
thickness = 1003 mmudstone
velocity = 2240 m/s
thickness = 373 m
Energy source is Air GunAngle of incidence = 9°
Let's calculate the time taken for energy to travel directly from the air gun to the first hydrophone (no bounces).
From the given information, we can calculate the distance traveled by energy.Let's calculate the distance travelled by the energy to reach the first hydrophoneDistance travelled in water (d1) = velocity * time takenLet, t1 be the time taken to reach the seafloor
t1 = (2 * depth) / Bw= (2 * 509) / 1478w = 1.37 s
Distance travelled in sandstone (d2) = velocity * time takenLet, t2 be the time taken to travel through sandstone t2 = thickness / Vs= 1003 / 2793t2 = 0.359 s
Distance travelled in mudstone (d3) = velocity * time takenLet, t3 be the time taken to travel through mudstone t3 = thickness / Vm= 373 / 2240t3 = 0.166 s
Let's calculate the distance travelled by the energy to reach the first hydrophoneD1= sin(9°) * Dwhere, D is the distance between the air gun and the first hydrophone.
Using Pythagoras theorem, we can find the distance D.
D² = d1² + d2² + d3² + D1²Now, D = sqrt(d1² + d2² + d3² + D1²)
Time taken to travel directly from the air gun to the first hydrophone (no bounces) = (D1) / (1478) + (D2) / (2793) + (D3) / (2240)
Where D1, D2 and D3 are calculated asD1= sin(9°) * DD² = d1² + d2² + d3² + D1²D = 6560 mD1 = 1034.5 mD2 = D3 = 0By substituting the values, we get
Time taken to travel directly from the air gun to the first hydrophone (no bounces) = (D1) / (1478) + (D2) / (2793) + (D3) / (2240)= 0.70 s
Therefore, it takes 0.70 seconds for energy to travel directly from the air gun to the first hydrophone (no bounces).
learn more about hydrophone here
https://brainly.com/question/2189435
#SPJ11
Air enclosed in a cylinder has density = 1. 4 kg/m3. A. What will be the density of the air if the length of the cylinder is doubled while the radius is unchanged?=______________kg/m3b. What will be the density of the air if the radius of the cylinder is halved while the length is unchanged?
a) Density of air is ρ = m/V (where m is the mass of air enclosed). As the mass of air enclosed remains constant, so ρ'=ρ/2 ; b) New density of air when the length of cylinder is doubled while the radius is unchanged is 0.7 kg/m³.
a. Let's assume the volume of air is V initially and the length of the cylinder is L and radius is R. Now, the new length will be 2L
keeping the radius R. As the volume of the cylinder is given as V = πR²L, the new volume can be written as
V' = πR²(2L).
Hence, the density of air can be written as ρ = m/V (where m is the mass of air enclosed). As the mass of air enclosed remains constant, ρ'=ρ/2
b. Let's assume the initial radius of the cylinder as R. Now, the radius is halved, which means the new radius will be R/2, while the length of the cylinder is unchanged, i.e., L. The new volume can be written as
V' = π(R/2)²L
= πR²L/4.
Now, the density of air can be written as ρ = m/V (where m is the mass of air enclosed). As the mass of air enclosed remains constant, ρ' = ρ*4
We know that Density of air enclosed in the cylinder is given as ρ= 1.4 kg/m³
Now, the volume of cylinder is given as V = πr²h
Given volume is V, we need to find the density when the length of the cylinder is doubled while the radius is unchanged.
New length of the cylinder = 2h (doubled), New volume of the cylinder = πr² (2h)
= 2πr²h
We know that Density is given by ρ = m/V
Given, ρ = 1.4 kg/m³, Initial volume = V, Initial mass of the air enclosed
= m
Let the new density be ρ'.
Now, ρ' = m/2πr²h
We can write the above equation as: ρ' = ρ (V/2V)
= 0.5 ρ
The new density of air when the length of the cylinder is doubled while the radius is unchanged is 0.7 kg/m³.
To know more about density, refer
https://brainly.com/question/26364788
#SPJ11
A point charge 91 = -2.5 μC is placed at x = 0 and y = +5 cm. A second point charge q2 = -6 μC is placed at x = +5 cm and y = 0. Determine the magnitude of the net electric field at the origin and t
The magnitude of the net electric field at the origin, due to the two point charges, is approximately 2.34 × 10^6 N/C.
To calculate the net electric field at the origin (0,0), we need to find the individual electric fields produced by each point charge and then add them vectorially.
The electric field produced by a point charge is given by the equation
E = k * (q / r^2),
where k is the electrostatic constant (8.99 × 10^9 N m²/C²),
q is the charge, and
r is the distance from the charge to the point of interest.
For the charge at (0, +5 cm), the distance to the origin is 5 cm = 0.05 m. Using the equation, the electric field produced by this charge is
E1 = (8.99 × 10^9 N m²/C²) * (-2.5 μC) / (0.05 m)^2.
For the charge at (+5 cm, 0), the distance to the origin is also 5 cm = 0.05 m. Using the equation, the electric field produced by this charge is
E2 = (8.99 × 10^9 N m²/C²) * (-6 μC) / (0.05 m)^2.
To find the net electric field at the origin, we need to add the vector components of E1 and E2. Since the charges are placed at right angles to each other, the electric fields will also be perpendicular.
Thus, we can use the Pythagorean theorem to find the magnitude of the net electric field at the origin: |E| = sqrt(E1^2 + E2^2).
Substituting the values, we have |E| = sqrt((-2.36 × 10^6 N/C)^2 + (-9.44 × 10^6 N/C)^2) ≈ 2.34 × 10^6 N/C.
Therefore, the magnitude of the net electric field at the origin is approximately 2.34 × 10^6 N/C.
To know more about "Pythagorean theorem" refer here:
https://brainly.com/question/231802#
#SPJ11
Which best describes how wave intensity and loudness are typically related?
While wave intensity provides a measurable physical quantity, loudness reflects the subjective perception of sound intensity and is influenced by various factors beyond wave intensity alone.
In the context of sound, wave intensity and loudness are closely related but not directly interchangeable terms. Wave intensity refers to the physical measure of the energy carried by a sound wave per unit area. It is quantified in terms of power per unit area and is typically measured in watts per square meter (W/m²). On the other hand, loudness is a subjective perception of the intensity of a sound experienced by a human ear.
While wave intensity and loudness are related, the perception of loudness is influenced by various factors, including the sensitivity of the human ear to different frequencies and the individual's threshold of hearing. The relationship between wave intensity and loudness follows a logarithmic scale known as the decibel (dB) scale.
The decibel scale allows us to quantify and compare different sound intensities based on their relative loudness to the human ear. It is important to note that a doubling of wave intensity does not necessarily result in a doubling of perceived loudness. Instead, a 10-fold increase in wave intensity corresponds to approximately a perceived doubling of loudness.
For such more questions on intensity
https://brainly.com/question/4431819
#SPJ8
Note- The complete question is "Which best describes how wave intensity and loudness are typically related in the context of sound?"
Mixtures of helium and oxygen are used in scuba diving tanks to help prevent "the bends", which is a condition caused by nitrogen bubbles forming in the bloodstream. 114 L of oxygen and 30.0 L of helium at STP (273.15 K and 1.00 bar) are pumped into a scuba tank with a volume of 9.6 L. What is the partial pressure of each gas in the tank, and what is the total pressure in the tank at 25 degrees Celsius?
The partial pressure of helium in the scuba tank is 2803 Pa, and the total pressure in the scuba tank is 13544 Pa. Partial pressure of a gas is the pressure that the gas would exert if it were present alone in the same container. The total pressure in the tank is the sum of the partial pressures of all the gases in the tank.
The partial pressure of each gas can be calculated using the ideal gas law, which relates the pressure, volume, amount, and temperature of a gas. The ideal gas law is given by PV = nRT,
where P is the pressure, V is the volume, n is the amount (in moles), R is the gas constant, and T is the temperature (in Kelvin).
The gas constant R has the value of 8.314 J/(mol K).
Given that 114 L of oxygen and 30.0 L of helium at STP (273.15 K and 1.00 bar) are pumped into a scuba tank with a volume of 9.6 L.
At STP, 1 mole of any gas occupies 22.4 L of volume.
Therefore, the number of moles of oxygen present in the scuba tank is equal to the number of moles of helium present in the scuba tank.
The number of moles of oxygen is equal to 114/22.4 = 5.09 moles.
The number of moles of helium is equal to 30.0/22.4 = 1.34 moles.
The total number of moles of gas present in the scuba tank is equal to 5.09 + 1.34 = 6.43 moles.
The temperature of the scuba tank is given to be 25 degrees Celsius.
To convert this temperature to Kelvin, we add 273.15 to get 298.15 K.
Using the ideal gas law, we can calculate the partial pressure of each gas in the scuba tank as follows:
Partial pressure of oxygen = (nRT/V)O2 = (5.09 mol)(8.314 J/(mol K))(298.15 K)/(9.6 L) = 10741 Pa
Partial pressure of helium = (nRT/V)
He = (1.34 mol)(8.314 J/(mol K))(298.15 K)/(9.6 L)
= 2803 Pa
The total pressure in the scuba tank is the sum of the partial pressures of oxygen and helium.
Total pressure = partial pressure of oxygen + partial pressure of helium
= 10741 Pa + 2803 Pa = 13544 Pa.
Therefore, the partial pressure of oxygen in the scuba tank is 10741 Pa, the partial pressure of helium in the scuba tank is 2803 Pa, and the total pressure in the scuba tank is 13544 Pa.
To learn more about pressure visit;
https://brainly.com/question/30673967
#SPJ11
3.Michelson interferometer a) Find the distance moved by the mirror to observe 25 counts of bright fringes given that the laser wavelength is 632.8 nm: b) If the mirror moved a distance L. produces 30
a) The distance moved by the mirror to observe 25 counts of bright fringes is 15,820 nm.
b) If the mirror moved a distance L produces 30 bright fringes, then 3L will produce 90 bright fringes.
How to solve for Michelson interferometer?a) A Michelson interferometer is an optical instrument that uses interference to measure distances. It consists of two mirrors, a beam splitter, and a detector. The beam splitter divides the light from a laser beam into two beams, which are then reflected by the two mirrors.
The distance moved by the mirror to observe 25 counts of bright fringes is equal to 25 times the wavelength of the light. In this case, the laser wavelength is 632.8 nm, so the distance moved by the mirror is 25 × 632.8 nm = 15,820 nm.
b) The number of bright fringes produced by a Michelson interferometer is proportional to the distance moved by the mirror. In this case, the mirror moved a distance L and produced 30 bright fringes. If the mirror is moved a distance of 3L, then the number of bright fringes will be 3 × 30 = 90.
Find out more on Michelson interferometer here: https://brainly.com/question/16749752
#SPJ4
Complete question:
3.Michelson Interferometer A) Find The Distance Moved By The Mirror To Observe 25 Counts Of Bright Fringes Given That The Laser Wavelength Is 632.8 Nm: B) If The Mirror Moved A Distance L. Produces 30 Counts Of Bright Fringes, When The Mirror Was Moved By 3L How Many Counts Of Bright Fringes Would Be Observed?
Policies Current Attempt in Progress A partly full paint can has 0.842 US gallons of paint left in it. (a) What is the volume of the paint, in cubic meters? (b) if all the remaining paint is used to coat a wall evenly (wall area-145 m²), how thick is the layer of wet paint? Give your answer in meters (a) Number Units (b) Number Units eTextbook and Media GO Tutorial Attempts: 0 of 3 used S Save for Later Using multiple attempts will impact your score 15% score reduction after attempt 2 Type here to search ii 1842 AM ✔ Question 7 of 10 Current Attempt in Progress Two bicyclists, starting at the same place, are riding toward the same campground by different routes. One cyclist rides 1190 o due east and then turres due north and travels another 1410 m before reaching the campground. The second cyclist starts out by heading due north for 1910 m and then turns and heads directly toward the campground. (a) At the turning point, how far is the second cycet from the campground? (b) in what direction (measured relative to due east within the range (-180, 180) must the second cyclist head during the last part of the trip? ö O hp Type here to search F C 1047 AM Question / of 10 (a) Number (b) Number eTextbook and Media Save for Later Using multiple attempts will impact your score. 15% score reduction after attempt 2- Type here to search O ii Units Units Ĵ Attempts:0 of 3 used Submit Answer 1042 MANG
(a) The volume of paint left in the can is approximately 0.842 US gallons. Converting this volume to cubic meters, we find that it is equivalent to approximately 0.003191 cubic meters.
(b) The thickness of the wet paint layer is approximately 0.000022 meters, or 0.022 millimeters.
(a) To find the volume of paint in cubic meters, we convert the volume of paint left in the can from US gallons to cubic meters. Since 1 US gallon is equal to 0.00378541 cubic meters, we can multiply 0.842 US gallons by 0.00378541 to obtain the volume in cubic meters. This calculation gives us approximately 0.003191 cubic meters.
(b) Next, we calculate the thickness of the wet paint layer by dividing the volume of paint by the wall area. Dividing 0.003191 cubic meters by 145 square meters gives us approximately 0.000022 meters, or 0.022 millimeters, as the thickness of the wet paint layer.
To know more about cubic meters here https://brainly.com/question/30106291
#SPJ4
it is usually harder to create a photograph that has smooth, shallow depth of field with a phone camera because
The main reason why it is usually harder to create a photograph that has a smooth, shallow depth of field with a phone camera is because of its limited aperture.
The aperture of a camera is the opening that allows light to enter the lens. It is the part of the camera that controls the amount of light that is let into the camera's sensor or film.An aperture is measured in f-stops and typically ranges from f/1.2 to f/16. The f-number determines the size of the aperture and how much light is allowed in.
The lower the f-number, the larger the aperture and the more light it allows in. When taking a picture with a shallow depth of field, the photographer will use a low f-number, which will create a large aperture. This will allow the background to blur and the subject to be in focus. However, most phone cameras have a fixed aperture, meaning they cannot be changed by the user. This makes it difficult to create a smooth, shallow depth of field.
Learn more about lens
brainly.com/question/29834071
#SPJ11
What is resilience?
How does total population in an area may affect resilience?
If we compare disasters that occur in the USA vs disasters that occur in Haiti, why does the USA suffer more economic loss, but a lower death toll than the Caribbean country? What are the implications of this?
Is a nation's response to a disaster solely determine by the nation's demographics? Explain your answer.
Thinking about Earth's carrying capacity, what factors are most likely to slow down population growth?
Evaluate the suggestion that the overpopulation problem on Earth can be solved by colonizing other planets.
Resilience refers to the ability to recover and adapt from disasters or shocks. The total population in an area can affect resilience, as a higher population can strain resources and infrastructure.
Resilience is the ability of a system or community to bounce back from a disaster or shock, adapting and recovering effectively. The total population in an area can have an impact on resilience.
In densely populated regions, such as urban areas, a higher population can strain resources, infrastructure, and services, making it more challenging to respond to and recover from disasters. Limited resources and overcrowding can lead to inadequate support and slower recovery.
When comparing the impact of disasters in the USA and Haiti, there are notable differences. While the USA may experience more economic loss, it often has a lower death toll compared to Haiti.
This can be attributed to several factors, including better infrastructure, stronger building codes, advanced warning systems, and greater preparedness measures in the USA. These factors enable the population to evacuate or seek shelter in a timely manner, reducing the loss of life. In contrast, Haiti faces challenges such as poverty, inadequate infrastructure, and limited resources, making it more vulnerable to the impacts of disasters.
A nation's response to a disaster is not solely determined by its demographics but is influenced by a range of factors. Demographics can play a role, as population density and distribution can affect resource allocation and the availability of emergency services.
However, other factors such as access to resources, infrastructure, governance, socio-economic conditions, and preparedness efforts also significantly influence a nation's ability to respond effectively to disasters. Collaborative efforts, international aid, and disaster management strategies are crucial in mitigating the impact of disasters and reducing vulnerability.
When considering Earth's carrying capacity and population growth, various factors are likely to slow down population growth. Improved access to education, particularly for women, can lead to lower birth rates as individuals make informed choices about family planning.
Quality healthcare services, including reproductive health care and access to contraceptives, also contribute to reducing population growth. Additionally, economic development, poverty alleviation, and sustainable practices can create conditions where families opt for smaller family sizes.
The suggestion of solving overpopulation by colonizing other planets is a complex and futuristic concept. While it may seem like a solution, it is crucial to prioritize sustainable practices and resource management on Earth. Colonizing other planets poses significant technological, logistical, and ethical challenges.
Instead, focusing on sustainable development, resource conservation, and addressing socio-economic issues on Earth should be the primary approach to tackling the overpopulation problem. By adopting responsible practices and ensuring equitable distribution of resources, we can strive for a more sustainable future.
Learn more about population density here:
https://brainly.com/question/16894337
#SPJ11
Drag force on a body increases with the increase in speed of the body . Justify with one example from everyday experience
Explanation:
One everyday example that justifies the increase in drag force with the increase in speed is riding a bicycle. When you ride a bicycle, you can feel the resistance against your body as you increase your speed.
At low speeds, the drag force is relatively low. However, as you start pedaling faster and gain speed, you will notice an increasing resistance against your body. This resistance is caused by the drag force acting on you as you move through the air.
As you accelerate on a bicycle, the air molecules in front of you get compressed, creating an area of high pressure. Simultaneously, the air molecules behind you expand, creating an area of low pressure. This pressure difference creates a force that opposes your forward motion, known as drag force or air resistance.
At higher speeds, the drag force becomes more significant and requires more effort to overcome. This is why you need to pedal harder or lean forward to reduce your frontal area and decrease the resistance as you ride faster.
The experience of feeling increased resistance while cycling at higher speeds demonstrates the effect of drag force increasing with speed. This principle applies not only to bicycles but also to various other objects moving through a fluid medium, such as cars, airplanes, or even a person running against the wind.
I hope I helped
A 60.0-kg child takes a ride on a Ferris wheel that rotates four times each minute and has a diameter of 20.0 m. (a) What is the centripetal acceleration of the child? magnitude m/s² direction: ---Se
The centripetal acceleration of the child on a Ferris wheel that rotates four times each minute and has a diameter of 20.0 m is 1.75 m/s².
What is centripetal acceleration?
The term centripetal acceleration is derived from the centripetal force. Centripetal acceleration is the acceleration that is directed towards the center of rotation of an object following a circular path. An object that follows a circular path experiences a continuous change in the direction of its velocity, although its speed may be constant.The diameter of the Ferris wheel, d = 20.0 m
Radius of the Ferris wheel, r = d/2 = 10.0 m
Frequency of rotation, f = 4 revolutions/minute = 4/60 revolutions/second = 1/15 revolutions/second
The time period of rotation, T = 1/f = 15 seconds
Speed of rotation, v = 2πr/T = 2 x (22/7) x 10/15 = 4.19 m/s
The centripetal acceleration of the child on the Ferris wheel is given by
a_c = v²/r = (4.19)²/10 = 1.75 m/s²
Therefore, the centripetal acceleration of the child on a Ferris wheel that rotates four times each minute and has a diameter of 20.0 m is 1.75 m/s².
Learn more about centripetal acceleration:
https://brainly.com/question/22103069
#SPJ11
Sketch a plot of what Current vs. Voltage data might look like for the light bulb where the resistance starts off roughly constant at low voltage values, but gets increasingly larger for higher voltage values (no numbers needed). Start by sketching the case for constant resistance first and then think about how this plot would change if the resistance were to increase with voltage.
The plot of Current vs. Voltage for a light bulb with increasing resistance with voltage would show a curve that starts with a straight line indicating constant resistance at low voltage values, but then gradually bends upward as the resistance increases with higher voltage values.
In the case of a light bulb with constant resistance, the plot of Current vs. Voltage would be a straight line, as Ohm's Law states that the current is directly proportional to the voltage when the resistance remains constant. As the voltage increases, the current would also increase linearly.
However, if the resistance of the light bulb increases with voltage, the plot would deviate from a straight line. At low voltage values, where the resistance is relatively constant, the plot would resemble the straight line seen in the case of constant resistance. But as the voltage increases, the resistance of the light bulb also increases, leading to a non-linear relationship between current and voltage. This would result in the plot bending upward, indicating a slower increase in current with increasing voltage due to the higher resistance.
Overall, the plot of Current vs. Voltage for a light bulb with increasing resistance with voltage would exhibit a curve that starts with a straight line at low voltages but gradually bends upward as the resistance increases at higher voltages.
To learn more about resistance refer:
https://brainly.com/question/17563681
#SPJ11
A ball is shot from the ground straight up into the air with an initial velocity of 46 ft/sec. Assuming that the air resistance can be ignored, how high does it go?
Equations of Motion:
Recall that when we have linear motion that is undergoing constant acceleration
, then we can write a position function as
The ball reaches a maximum height of 46.94 feet when shot straight up into the air from the ground with an initial velocity of 46 ft/sec. This can be calculated using the equations of motion for linear motion with constant acceleration.
To determine the maximum height, we need to find the time it takes for the ball to reach its highest point. Since the ball is shot straight up, its velocity decreases at a constant rate due to the acceleration of gravity (-32 ft/sec²). The time it takes for the ball to reach its highest point can be found using the equation:
[tex]\[v_f = v_i + at\][/tex]
where [tex]\(v_f\)[/tex] is the final velocity (0 ft/sec at the highest point), [tex]\(v_i\)[/tex] is the initial velocity (46 ft/sec), a is the acceleration (-32 ft/sec²), and t is the time.
Substituting the known values into the equation, we can solve for t:
[tex]\[0 = 46 - 32t\][/tex]
Simplifying the equation, we get:
[tex]32t = 46 \\t = \frac{46}{32} = 1.4375 \text{ seconds}[/tex]
Now that we know the time it takes to reach the highest point, we can calculate the maximum height by using the equation:
[tex]\[h = v_i t + \frac{1}{2} a t^2\][/tex]
Substituting the known values into the equation, we get:
[tex]\[h = 46 \times 1.4375 + \frac{1}{2} (-32) \times (1.4375)^2\][/tex]
Simplifying the equation, we find:
[tex]\[h = 46.94 \text{ feet}\][/tex]
Therefore, the ball reaches a maximum height of approximately 46.94 feet.
To learn more about acceleration refer:
https://brainly.com/question/30595126
#SPJ11
Create a 50-word summary, in your own words, that describes how accurately the circumference of Earth can be measured using the Sun. You should cite specific evidence you have collected in your description. Feel free to reference things learned in specific parts (I and II), or to create label sketches to illustrate your response.
The circumference of the Earth can be accurately measured by observing the Sun. Eratosthenes was an ancient Greek astronomer and mathematician who used this method to estimate the Earth's circumference in the third century BC.
He noticed that on the summer solstice, the Sun shone directly into a deep well in Syene, Egypt while casting a shadow on a stick in Alexandria, about 800 km to the north. By measuring the angle of the shadow in Alexandria, he was able to determine the angle between the Sun and the zenith, which he found to be 1/50th of a circle. He then multiplied this angle by the distance between the two cities to estimate the circumference of the Earth, which he found to be around 39,375 km. This method is still used today, with modern instruments allowing for even greater accuracy.
To know more about circumference visit:
https://brainly.com/question/28757341
#SPJ11
The change in momentum that occurs when a 1kg ball traveling at
4m/s strikes a wall and bounces back at 2m/s is
A) 2 kg m/s
B) 4 kg m/s
C) 6 kg m/s
D) 8 kg m/s
When a 1 kg ball moving at 4 m/s strikes a wall and bounces back at 2 m/s, the change in momentum is 6 kg m/s. The correct answer is option C.
Momentum is defined as the product of mass and velocity, and it is a vector quantity. When an object strikes another object, there is a change in momentum. The law of conservation of momentum states that the total momentum of a system of objects remains constant if there are no external forces acting on the system.
The change in momentum of an object that strikes a stationary wall and bounces back with the same velocity is given by:
Δp = 2mv
Where,
m is the mass of the object,
v is the velocity of the object after the collision.
In this case, the ball has a mass of 1 kg and an initial velocity of 4 m/s. After bouncing back from the wall, its velocity is 2 m/s. Therefore, the change in momentum is:
Δp = 2mv = 2(1 kg)(2 m/s - 4 m/s) = -4 kg m/s
The negative sign indicates that the momentum is in the opposite direction to the initial momentum. To get the absolute value of the change in momentum, we take the magnitude, which is 4 kg m/s. However, since we are interested in the change in momentum, we need to include the direction, which is opposite to the initial momentum.
Therefore, the change in momentum that occurs when a 1 kg ball traveling at 4 m/s strikes a wall and bounces back at 2 m/s is 6 kg m/s, and the correct option is C.
Learn more about momentum:
https://brainly.com/question/18798405
#SPJ11
1. A current of 1.8 A delivers 2.5 C of charge.
How much time was required?
a. 0.70 s
b. 0.72 s
c. 1.4 s
d. 4.5 s
2. Which are characteristics of a ray when it hits a boundary and reflects, but not when it hits the boundary and refracts? Check all that apply.
1. changes direction
2. changes speed
3. does not change direction
4. does not change speed
5. bounces off the boundary
6. passes through the boundary
Answer:
The answer is 1.4s
The answer is 5
Bounces off the boundary
Explanation:
[tex]curreny = \frac{quantity \: of \: charge}{time} [/tex]
[tex]i = \frac{q}{t} [/tex]
making t the subject of formula
t=Q/I
t=2.5/1.8
t=1.4s
To find the time required, we can use the equation Q = It, where Q is the charge, I is the current, and t is the time. Rearranging the equation to solve for t, we have t = Q/I. Plugging in the given values, t = 2.5 C / 1.8 A. Evaluating this expression gives t ≈ 1.39 s.
Therefore, the correct answer is c. 1.4 s.
1. When a ray of light hits a boundary and reflects, but does not refract, the characteristics observed are:
2. The ray changes direction: When the light ray reflects, it bounces off the boundary at an angle determined by the law of reflection.
3. The ray does not change direction: Refraction refers to the bending of light as it passes from one medium to another. When the ray only reflects, it does not change its direction as it remains within the same medium.
5. The ray bounces off the boundary: Reflection occurs when the ray of light strikes the boundary and returns back into the same medium.
6. The ray does not pass through the boundary: Refraction involves the transmission of light across the boundary, whereas reflection does not allow the light to pass through.
In summary, the characteristics observed when a ray hits a boundary and reflects, but not refracts, are: the ray changes direction, does not change speed, bounces off the boundary, and does not pass through the boundary.
To learn more about current refer:
https://brainly.com/question/1256531
#SPJ11
The magnetic field lines produced by a straight wire with a current entering the paper are:
a. in the parallel direction of the current
b. parallel but in the opposite direction to the current
c. exit the wire in a radially outward direction
d. in concentric circles clockwise around the wire
F. in concentric circles counterclockwise around the wire
The magnetic field lines produced by a straight wire with a current entering the paper are exit the wire in a radially outward direction. Option (C) is correct.
The direction of magnetic field lines produced by a straight wire with a current entering the paper is such that they exit the wire in a radially outward direction. This indicates that the magnetic field is directed in a clockwise direction when viewed from the opposite end.
The concentric circles formed around the wire are counterclockwise, which indicates that the magnetic field is also directed in a counterclockwise direction when viewed from above the wire.
The magnetic field lines produced by a straight wire with a current entering the paper can be determined using the right-hand rule. Curl your right hand such that your fingers point in the direction of the current, and your thumb will point in the direction of the magnetic field.
Know more about magnetic field, here:
https://brainly.com/question/14848188
#SPJ11
Two tugboats pull a disabled supertanker. Each tug exerts a constant force of 2.2x106 N, one an angle 14° west of north and the other an angle 14° east of north, as they pull the tanker a distance 0.68 km toward the north. Part A What is the total work they do on the supertanker? Express your answer in joules. DMG 195] ΑΣΦ W = Submit Provide Feedback Request Answer ? 3
The total work they do on the supertanker is 1360J.
To find the total work done by the two tugboats on the supertanker, we need to calculate the work done by each tugboat and then add them together.
The work done by a force can be calculated using the equation:
Work = Force * Displacement * cos(theta)
where:
Force is the magnitude of the force applied
Displacement is the magnitude of the displacement
theta is the angle between the force and displacement vectors
For the first tugboat:
Force = 2.2 x 10^6 N
Displacement = 0.68 km = 0.68 x 10^3 m=680m
theta = 14° west of north
Using the equation above, we can calculate the work done by the first tugboat:
Work1 = Force * Displacement * cos(theta)
For the second tugboat:
Force = 2.2 x 10^6 N
Displacement = 0.68 km = 0.68 x 10^3 m=680m
theta = 14° east of north
Similarly, we can calculate the work done by the second tugboat:
Work2 = Force * Displacement * cos(theta)
To find the total work done by the two tugboats, we can add the individual works together:
Total Work = 680+680=1360J
Learn more about Force:https://brainly.com/question/12785175
#SPJ11
2) A tennis enthusiast wants to estimate the mean length of
women's
singles matches held during the Wimbledon tennis tournament.
How
many matches should be in a sample to estimate the mean length
with
The best way for a tennis enthusiast to estimate the mean length of tennis matches is to conduct a statistical study by collecting data on the lengths of matches. Two matches should be in a sample to estimate the mean length.
The enthusiast can gather data from various sources such as tournament websites, sports magazines, and databases. Estimating the mean length of tennis matches requires collecting data and conducting a statistical study.
To get a reliable estimate of the mean length of tennis matches, a tennis enthusiast can collect data on the lengths of matches played in various tournaments. They can collect data from tournament websites, sports magazines, and databases such as the International Tennis Federation.
Once the data is collected, the enthusiast can use statistical tools such as mean, median, and mode to estimate the average length of tennis matches. Another way to get a more accurate estimate is to calculate the standard deviation of the data.
By doing this, the enthusiast can get an idea of the spread of the data, which can help to identify outliers or unusual matches that may affect the mean. In conclusion, conducting a statistical study by collecting data is the best way to estimate the mean length of tennis matches.
Know more about mean length, here:
https://brainly.com/question/16526320
#SPJ11
A wind turbine with a blade diameter of 25 m is to be installed in a location where average wind velocity is 6 m/s. If the overall efficiency of the turbine is 34 percent, determine (a) the average electric power output, (b) the amount of electricity produced from this turbine for an annual operating hours of 8000 h, and (c) the revenue generated if the electricity is sold at a price of $0.09/kWh.Take the density of air to be 1.3 kg/m'.
The wind turbine with a blade diameter of 25 m and an average wind velocity of 6 m/s has an average electric power output of 172.34 kW. For an annual operating time of 8000 hours, the turbine will produce approximately 1,378,720 kWh of electricity.
If sold at a price of $0.09/kWh, the revenue generated from the electricity produced by the turbine would be approximately $124,086.72. To calculate the average electric power output, we can use the formula:
[tex]\[P = \frac{1}{2} \times \text{{density of air}} \times A \times v^3 \times \text{{efficiency}}\][/tex]
Substituting the given values into the formula, we can calculate the average electric power output:
[tex]\[P = \frac{1}{2} \times 1.3 \, \text{{kg/m}}^3 \times \left(\frac{\pi}{4} \times (25 \, \text{{m}})^2\right) \times (6 \, \text{{m/s}})^3 \times 0.34 \approx 172340 \, \text{{watts}} \approx 172.34 \, \text{{kW}}\][/tex]
To determine the amount of electricity produced for an annual operating time of 8000 hours, we multiply the average electric power output by the operating time:
[tex]\[\text{{Electricity produced}} = P \times \text{{operating time}} = 172.34 \, \text{{kW}} \times 8000 \, \text{{h}} = 1,378,720 \, \text{{kWh}}\][/tex]
Finally, to calculate the revenue generated, we multiply the electricity produced by the selling price per kilowatt-hour:
[tex]\[\text{{Revenue}} = \text{{Electricity produced}} \times \text{{price per kWh}} = 1,378,720 \, \text{{kWh}} \times \$0.09/\text{{kWh}} \approx \$124,086.72\][/tex]
To learn more about power refer:
https://brainly.com/question/1634438
#SPJ11
A satellite 1000 km above Mars is orbiting Mars every 15 hours.
The radius of Mars is approximately equal to 3,300 km. How far does
the satellite travel in 1 hour?
The satellite travels approximately 1,798.07 km in 1 hour. The circumference of the satellite's orbit is 8,600π km, and the satellite orbits Mars every 15 hours.
To find out how far the satellite travels in 1 hour, we need to determine its orbital circumference.
The circumference of a circular orbit can be calculated using the formula:
C = 2πr
where C is the circumference and r is the radius of the orbit.
In this case, the satellite is orbiting Mars, which has a radius of approximately 3,300 km. The satellite is 1,000 km above the surface of Mars. Therefore, the radius of the satellite's orbit is the sum of the radius of Mars and the distance above the surface:
r = 3,300 km + 1,000 km = 4,300 km
Now we can calculate the circumference:
C = 2π(4,300 km) = 8,600π km
Since the satellite orbits Mars every 15 hours, the distance traveled in 1 hour is 1/15th of the circumference:
[tex]\begin{equation}\text{Distance traveled in 1 hour} = \frac{1}{15} \cdot 8600\pi \text{ km}[/tex]
Calculating this value gives us:
Distance traveled in 1 hour ≈ 1,798.07 km
Therefore, the satellite travels approximately 1,798.07 km in 1 hour.
To know more about the circumference refer here :
https://brainly.com/question/17191505#
#SPJ11
what volume of oxygen gas is produced when 51.0 g of mercury(ii) oxide reacts completely according to the following reaction at 25oc and 1 atm?
The given reaction is as follows;2HgO(s) → 2Hg(l) + O2(g). First of all, we need to find the moles of mercury oxide used. The molar mass of mercury oxide, HgO = 200.59 g/mol. Thus, the moles of HgO used is; mass/molar mass = 51.0 g / 200.59 g/mol = 0.2544 mol.
The stoichiometry of the given reaction tells us that the molar ratio of HgO to O2 is 2:1.
Thus, the moles of O2 produced will be 0.2544/2 = 0.1272 mol.
Now we can use the ideal gas law to calculate the volume of O2 produced.
The ideal gas law is given as; PV = nRT.
We have the following values:P = 1 atmV = unknown = 0.1272 molR = 0.0821 L atm/mol K (universal gas constant)T = 25°C = 298 K.
Now we can solve for V.V = (nRT)/P = (0.1272 mol)(0.0821 L atm/mol K)(298 K)/(1 atm) = 2.97 L.
Therefore, the volume of O2 gas produced is 2.97 L.
Learn more about ideal gas law here ;
https://brainly.com/question/30458409
#SPJ11
A teflon block of mass 5.00 kg slides to the right on a steel floor under the influence of an external applied force that is directed toward the right and has magnitude 3.00N (as you might have due to the constant pull from a cord attached to it, for instance). Enter all answers in standard units,and do not include the units in the answer fields I) Calculate the magnitude of the normal force with which the floor pushes on the block. 2 Calculate the magnitude of the frictional force acting on the block. 3Calculate the magnitude of the acceleration this block is experiencing. 4-6) Take the same problem as before and add a second external force that points in the same direction as the normal force from the floor on the block with magnitude 8.00 N. Solve the same three problems and report following the same guidance. 4) Calculate the magnitude of the normal force with which the floor pushes on che block. 5 Calculate the magnitude of the frictional force acting on the block 6Calculate the magnitude of the acceleration this block is experiencing
A Teflon block of mass 5.00 kg slides to the right on a steel floor under the influence ofan external applied force that is directed toward the right and has magnitude 3.00 N.(1)The magnitude of the normal force is 49.0 N.(2)Net force = 1.04 N.(3)The magnitude of the acceleration experienced by the block is 0.208 m/s².
(1)The magnitude of the normal force with which the floor pushes on the block is equal to the weight of the block since there is no vertical acceleration.
Weight = mass * gravitational acceleration
Weight = 5.00 kg * 9.8 m/s²
Weight = 49.0 N
Therefore, the magnitude of the normal force is 49.0 N.
The magnitude of the frictional force acting on the block can be calculated using the equation
Frictional force = coefficient of friction * normal force
Assuming a coefficient of friction of 0.04 between steel and Teflon, we can calculate:
Frictional force = 0.04 * 49.0 N
Frictional force = 1.96 N
So, the magnitude of the frictional force acting on the block is 1.96 N.
(2) The magnitude of the acceleration experienced by the block can be calculated using Newton's second law:
Net force = mass * acceleration
The net force acting on the block is the applied force minus the frictional force:
Net force = applied force - frictional force
Net force = 3.00 N - 1.96 N
Net force = 1.04 N
(3)Now, we can calculate the acceleration:
Acceleration = Net force / mass
Acceleration = 1.04 N / 5.00 kg
Acceleration = 0.208 m/s²
So, the magnitude of the acceleration experienced by the block is 0.208 m/s².
To learn more about coefficient of friction visit: https://brainly.com/question/14121363
#SPJ11
delta h for the formation of rust is -826kj/mol. how much energy is involved in the formation of 5 grams of rust?
The energy involved in the formation of 5 grams of rust can be calculated using the given value of ΔH for the formation of rust, which is -826 kJ/mol.
In order to calculate the energy involved in the formation of 5 grams of rust, we need to convert the mass of rust from grams to moles. To do this, we use the molar mass of rust, which is the sum of the atomic masses of the elements in rust (iron and oxygen). The molar mass of rust is approximately 159.69 g/mol.
Next, we calculate the number of moles of rust in 5 grams by dividing the mass by the molar mass:
[tex]\[\text{moles of rust} = \frac{\text{mass of rust (g)}}{\text{molar mass of rust (g/mol)}}\][/tex]
[tex]\[\text{moles of rust} = \frac{5 \, \text{g}}{159.69 \, \text{g/mol}} \approx 0.0313 \, \text{mol}\][/tex]
Finally, we can calculate the energy involved in the formation of 5 grams of rust by multiplying the number of moles by the ΔH value:
[tex]\[\text{Energy} = \text{moles of rust} \times \Delta H\][/tex]
[tex]\[\text{Energy} = 0.0313 \, \text{mol} \times (-826 \, \text{kJ/mol}) \approx -25.8 \, \text{kJ}\][/tex]
Therefore, the energy involved in the formation of 5 grams of rust is approximately -25.8 kJ. The negative sign indicates that the reaction is exothermic, releasing energy.
To learn more about energy refer:
https://brainly.com/question/30337808
#SPJ11