Answer:
Photic Zone
Explanation:
The photic zone is the uppermost layer of the sea that recieves sunlight allowing phytoplankton to perform photosynthesis.
Which is the best way to determine if an object is made of pure silver?
O Determine the solubility of the object.
O Test to see if the object is chemically reactive.
Determine the density of the object and compare the known density of pure silver.
O Compare the mass of the silver object to the mass of a piece of pure silver.
Answer:
The correct option is;
Determine the density of the object and compare the known density of pure Silver
Explanation:
The density of the object is found by finding the weight of the object, and then finding the volume (of water) the object displaces when it is immersed (in water)
The density is then fond by dividing the weighed mass by the volume the object displaces when immersed
Compare the result of the measured density with that of pure silver. If the two have density, as well as other similar physical characteristics, then the object is likely to be pure silver.
A sodium atom has 11 protons, 10 electrons, and 12 neutrons. What is its charge
Answer:
An ion with 11 protons, 11 neutrons, and 10 electrons would have a charge of 1+, also expressed as a charge of positive one or +1.
Methane (CH4) combines with oxygen gas (O2) to form carbon dioxide
(CO2) and water (H20). Describe the number and type of atoms for a
molecule of each substance.
Explanation:
this is the balanced equation
which of these is a balanced chemical equation
Answer:
C
Explanation:
Answer:
C
Explanation:
Balanced equations have the same number of atoms of each element on both sides of the equation (right and left side of the arrow).
First count the number of atoms of each element of the original equation.
CO(g) + O₂(g) ⟶ CO₂(g)
RHS: 1C, 3O
LHS: 1C, 2O
Balancing the O atoms,
2CO(g) + O₂(g) ⟶ 2CO₂(g)
LHS: 2C, 4O
RHS: 2C, 4O
Thus, the equation is balanced.
*General rule: balance O and H atoms last (in this case C atoms were initially balanced)
LHS= left- hand side
RHS= right- hand side
A) Incorrect as there are 3 O atoms on the LHS and only 2 O atoms on the RHS.
B) Incorrect as there is 1 C atom on the LHS and 2 C atoms on the RHS. Also, on the LHS there is 3 O atoms while there is 4 O atoms on the RHS.
D) Incorrect.
LHS: 2C, 6O
RHS: 2C, 4O
A piece of wood that measures 2.7 cm x 5.5 cm x 3.9 cm has a mass of 84 g what is the density of the wood
The density of the wood : 1.45 g/cm³
Further explanationDensity is a quantity derived from the mass and volume
Density is the ratio of mass per unit volume
With the same mass, the volume of objects that have a high density will be smaller than objects with a smaller type of density
The unit of density can be expressed in g/cm³ or kg/m³
Density formula:
[tex]\large {\boxed {\bold {\rho ~ = ~ \frac {m} {V}}}}[/tex]
ρ = density
m = mass
v = volume
Volume of the wood[tex]\tt V=2.7\times 5.5\times 3.9=57.915~cm^3[/tex]
density[tex]\tt \rho=\dfrac{m}{V}\\\\\rho=\dfrac{84~g}{57.915~cm^3}=\boxed{\bold{1.45`g/cm^3}}[/tex]
Which data are shown on topographic maps?
A.)population sizes of major cities
B.)information about elevation and slope
C.)relief of each area laid out in tiled squares
D.)variations in climate between geographic areas
Answer:
B
Explanation:
Answer:
information about elevation and slope
Explanation:
.
Sodium + oxygen
What colour is the flame produces
Answer:
Orange
Explanation:
I used google my b
Answer:
ORANGE
explanation:
Small pieces of sodium burn in air with often little more than an orange glow. Using larger amounts of sodium or burning it in oxygen gives a strong orange flame.
I need help pls brainless if right
Answer: C
Jane Goodall observed the chimpanzees. She noted the chimpanzees, and she studied their bodies closely. This is an example of investigation.
Hope this helps you!
How many minutes are In 3,417 seconds?
Answer:
57 minutes and 35 seconds, or 56.95
Explanation:
Answer:
56.95 minutes
Explanation:
hope it helps
What element would have this electron configuration:
1s22s22p5
How is calculating a weighted average
different than calculating a non-weighted
average (like a mean average)?
Answer:
The Key difference between average vs weighted average is that simple average is nothing but simply adding up all the observation values and dividing the same by the total number of observations to calculate the average whereas weighted average is an average where each observation value will have a frequency assigned.
Explanation:
The weighted average involve the frequency of scores while the non-weighted average do not include the frequency of scores.
To calculate a non-weighted average such as a mean average, all we need to do is to sum up the scores and divide this sum by the number of scores. For a weighted average, each score must have a frequency attached to it. This frequency is called specific weight.
While the non-weighted average such as a mean average is a measure of central tendency, the weighted average tends to be biased towards the scores that have the largest frequency.
Learn more:https://brainly.com/question/14283892
Which types of reactions would result in a color change?
Answer:
reversible redox reaction
Explanation:
1. What is the charge of an oxide ion?
O
2+
3+
2-
оо
3-
Answer:
2+
Explanation:
An oxide ion is diatomic
What is a model and why do scientist use them?
Answer: In science, a model is a representation of an idea, an object or even a process or a system that is used to describe and explain phenomena that cannot be experienced directly. Models are central to what scientists do, both in their research as well as when communicating their explanations.
(hope this helps you ^^)
What is the main difference between gases and liquids
Answer:
1.Liquids have less force of attraction between molecules than solids and more than gases; gases have a very weak force of attraction between the molecules which is the least amongst the three states of matter. 2.Liquids have definite volume; gases do not have definite volume.
Explanation:
:) HOPE THIS HELPS
Answer:
particles
Explanation:
particles are buzzing around very quickly when in a gas, but when in a liquid they vibrate.
Carbon-12 and Carbon-14 are elements that are isotopes of each other. What do Carbon-12 and Carbon-14 have in common
Answer: Carbon-12 and Carbon-14 both have the atomic number of 6.
Explanation: They are both isotopes of one another. This means they have different amount of neutrons, resulting in different atomic masses.
Answer:
They have the same atomic number. Carbon has the atomic number of 6 which means that all isotopes have the same proton number. However, the number of neutrons is different, thus giving different mass numbers.
Explanation:
Is this correct?
If the temperature is below the melting point the substance is a solid
If the temperature is above the boiling point the substance is a gas
If the temperature is in between the boiling and melting points the substances a liquid.
If the normal melting point of a substance is below room temperature, the substance is a liquid at room temperature.
If both the normal melting point and the normal boiling point are above room temperature, the substance is a solid.
Using the formula M=dx v, Calculate the mass of a liquid with a density of
17.5 g/mL and a volume of 7mL.
Answer:
The answer is 122.5 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
volume = 7 mL
density = 17.5 g/mL
We have
mass = 17.5 × 7
We have the final answer as
122.5 gHope this helps you
Plz help! :) :D I will mark you as BRAINLIEST!!!
Physical and Chemical Properties of Magnesium
Here is an EXAMPLE of how it has to be like. Instead of Mercury, you HAVE to do Magnesium
Physical Properties of Mercury: ”I’m a highly stable element, so you can count on me”
Chemical Properties of Mercury: ”I love to travel but I do corrode aluminum so we won’t be flying off on adventures in airplanes planes anytime soon”
Answer:
Some of the physical and chemical properties of magnesium are:
-The term ‘magnesium’ is derived from the Greek word magnesia, which refers to the name of the place from where it was extracted.
-Magnesium is closely related to manganese and magnetite.
-About 2.1% of the Earth’s crust contains magnesium. This makes magnesium the 6th most found element.
-The biggest deposits of magnesium is found in the seawater. It has been calculated by scientists that a cubic mile of seawater contains about 6 million tons of this element
2nd answer:
Physical Properties of Magnesium: ”I’m a highly stable element, so you can count on me”
Chemical Properties of Magnesium: ”I love to travel but I do corrode aluminum so we won’t be flying off on adventures in airplanes planes anytime soon
Explanation:
Hope this helps you out! UwU
1. State the properties of matter in the liquid state.
Answer:
Liquids take the shape of their container, they are one of the three stages in between a solid and a gas. A liquids particles are not in a fixed position like a solids, nor do they move as freely as a gas.
HELP ME OUT PLEASE!! I NEED HELP !
This diagram represents one of the four levels of industry. Which term best
completes the diagram?
Factory employees
Oil refinery workers
Butchers
A. Quaternary sector
OB. Secondary sector
C. Tertiary sector
D. Primary sector
Answer: OB. Secondary Sectors.
Explanation: Make sure to study as the text provided, and study guide state manufacturers, butchers, and factory employees are apart of the secondary sector in the world economy. You’ll do great on Quiz 3.2.5! Make sure to study, have a g’day. Please don’t listen to people who say this answer is falsen as many other questions do, don’t be the one to spread false information as this people’s academics, here’s a picture as well ❤︎. Again, its B!
A car with a mass of 800 kg is accelerated with a force of 6000 N. If resisting forces are ignored, what is the acceleration of the car? yen
Answer:
The answer is 7.5 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
f is the force
m is the mass
From the question we have
[tex]a = \frac{6000}{800} = \frac{60}{8} = \frac{15}{2} \\ [/tex]
We have the final answer as
7.5 m/s²Hope this helps you
Which of the following units would be best for measuring the mass of a penny?
A. Grams
B. Kilograms
C. Milligrams
D. Centigrams
Answer:
Grams
Explanation:
The mass of a penny is closer to the mass of a grape than to the mass of a book. So, use grams to measure the mass of a penny.
How do combination circuits help prevent problems in circuits in a home? If it helps, think about a bedroom since all electrical work in a bedroom is on the same circuit.
What is the temperature 128 K expressed in degrees Fahrenheit (just the number with two decimal places)?
Answer:
-229.27°
Explanation:
(128K − 273.15) × 9/5 + 32 = -229.3°F
hello nice ppl(ɔ◔‿◔)ɔ ♥
Answer:
Hi
Explanation:
How has your brainly experience been so far? Are you liking?
Answer:
Thx you are sooo noice
Explanation:
UwU U3U
Chlorine has an atomic number of 17. How many protons are in
the nucleus of a chlorine atom?
Answer:17 protons
Explanation:
An element with 17 protons will always be chlorine. However an element's mass numbers can vary, which means that it can have different numbers of neutrons. So although chlorine has a mass number of 35 which means it has 18 neutrons, it can also have a mass number of 37, which means it has 20 neutrons.
Calculate the molarity of 0.207 grams of Ca(OH)2 in an aqueous solution with a total volume of 40.0 mL
Answer:
40.0 mL. (4 marks)...
Explanation:
?
The group number tells the number of
Elements in the column
Number of valence electrons
O Number of energy levels
O Number of protons in the elements
Answer:
number of valence electrons
Explanation:
elements in the same group has same number of valence electrons
PLEASE HURRY WILL GIVE BRAINLIEST
Click Oil Basics and use the information to complete this passage that discusses how plastic production affects society.
The production of plastics makes life
{answer} , so it benefits society. On the other hand, the production of plastics causes air and water {answer} , so it also harms society.
Answer:
easier and pollution
Explanation:
I just had this question and got it right