in diluting the standard solutions, 0.01 m hno3 is used. in the dilution, is it more important to use the correct volume or the correct concentration of the hno3 solution for the dilution? explain.

The amount of Ca(OH)₂ produced = 5.2 g which is calculated in the below section.

NUMBER OF MOLES of HCl = Molarity of solution x Volume of Solution

# of moles of HCl = (0.40 mol/L ) x 350 mL

                              = (0.40 mol/L ) x 0.350 L

                              = 0.14 mol

The mass of HCl that makes 0.14 mol of HCl

Mass of HCl= # of moles x molar mass of HCl

Mass of HCl = 0.14 mol x 36.5 g/ mol

Mass of HCl = 5.11g

As per Stoichiometry , 1g of HCl reacts with 1.015 g of Ca (OH)₂

So, 5.11g of HCl can react with 5.11 x 1.015  g

                                                 = 5.1865 g or 5.2 g of Ca(OH)₂

To learn more about number of moles check the link below-

https://brainly.com/question/29367909

#SPJ4

To solve this problem, we can use the combined gas law formula, which relates the initial and final states of a gas:

V1/T1 = V2/T2
Where:
V1 = initial volume = 2.5 L
T1 = initial temperature = 273 K (since STP is 0°C, which is 273 K)
V2 = final volume (what we need to find)
T2 = final temperature = 373 K

Rearrange the formula to find V2:
V2 = V1 * (T2 / T1)
Substitute the known values:
V2 = 2.5 L * (373 K / 273 K)
V2 ≈ 3.42 L
So, the new volume of the gas when the temperature is raised to 373 K and the pressure remains constant will be approximately 3.42 L.

For more questions on: combined

https://brainly.com/question/25290815

#SPJ11

To differentiate between AgCl(s) and PbCl₂(s), we can use a reagent that reacts differently with each compound. One such reagent is a solution of ammonia (NH₃).

When ammonia is added to AgCl(s), it will dissolve the solid and form a colorless, soluble complex ion, [Ag(NH₃)2]+. This is because AgCl is soluble in ammonia due to the formation of the complex ion.

AgCl(s) + 2NH₂(aq) → [Ag(NH₃)2]+(aq) + Cl^-(aq)

On the other hand, when ammonia is added to PbCl₂(s), it will not dissolve the solid, and there will be no observable reaction. This is because PbCl₂ is not soluble in ammonia, and the complex ion does not form.

PbCl₂(s) + 2NH₃(aq) → No observable reaction

Therefore, the addition of ammonia to the test tube containing the white solid will help differentiate between AgCl and PbCl₂.

If the solid is AgCl, it will dissolve in the ammonia solution and form a colorless complex ion, while if the solid is PbCl₂, there will be no observable reaction.

to know more about reagents refer here:

https://brainly.com/question/31228572#

#SPJ11

The pH of the resulting solution is 1.08 (rounded to two decimal places).

First, we need to calculate the amount of acid and base present:

moles of HCl = (0.10 mol/L) * (0.025 L) = 0.0025 mol \\moles of NaOH = (0.10 mol/L) * (0.005 L) = 0.0005 mol

Since HCl and NaOH react in a 1:1 ratio, all of the NaOH will be used up in the reaction and 0.0005 moles of HCl will be left unreacted.

So, total volume of the solution will be [tex]25.0 ml + 5.0 ml = 30.0 ml = 0.03 L[/tex]

The concentration of unreacted HCl will be:

C(HCl) = (0.0025 mol) / (0.03 L) = 0.0833 M

Now we can calculate the pH :  pH = -log[H+]

[H+] = 0.0833 M \\pH = -log(0.0833) = 1.08

To know more about solution, here

brainly.com/question/30665317

#SPJ4

Answer:

pH = 1.18

Explanation:

First, calculate the moles of acid in the solution:

(0.0250 L )(0.10molL)=0.0025 mol acid

Next, calculate the moles of base:

(0.0050 L)(0.10molL)=0.00050 mol base

The strong acid and strong base will dissociate completely to generate the same number of moles of hydronium and hydroxide, respectively. The amount of acid exceeds the amount of base, so all the added hydroxide will neutralize an equivalent amount of hydronium. To find the remaining amount of hydronium, we subtract the moles of hydroxide added (equal to the moles of hydronium neutralized) from the moles of hydronium added:

0.0025 mol H3O+−0.00050 mol OH−=0.0020 mol H3O+

To find the concentration of hydronium, we must divide this number of moles by the total volume of solution, being sure to add the volumes of acid and base added together:

0.0020 mol H3O+0.0300 L≈0.06667 M H3O+

Finally, take the negative logarithm of this amount to obtain the pH.

-log(0.06667)=1.18

Since the hydronium concentration is only precise to two significant figures, the logarithm should be rounded to two decimal places.

Substituted hydrocarbons are organic compounds that consist of hydrocarbons to which one or more functional groups have been substituted for one or more hydrogen atoms or carbon groups.

The functional group is a specific group of atoms that gives the molecule its characteristic properties and reactions.

Substitution is the process by which one or more hydrogen atoms or carbon groups are replaced by a functional group.

By substituting one or more hydrogen atoms or carbon groups in a hydrocarbon chain, we get a new molecule that has its own characteristic properties.

To know more about hydrocarbons visit:

https://brainly.com/question/30907363

#SPJ11

Coach Pollard used about 544 J of kinetic energy during his sprint.

Kinetic energy is the energy possessed by a moving object due to its motion. In this case, Coach Pollard's kinetic energy is directly proportional to his mass and the square of his velocity. As he runs faster or has more mass, his kinetic energy will increase accordingly. This is important to consider in athletics and sports where energy and power are key factors in performance.

The kinetic energy of Coach Pollard can be calculated using the formula KE = 1/2mv², where m is the mass of Coach Pollard and v is his velocity. Substituting the given values, we get KE = 1/2 × 68 kg × (4 m/s)² = 1/2 × 68 kg × 16 m²/s² = 544 J. As a result, Coach Pollard used approximately 544 J of kinetic energy throughout his sprint.

To know more about the Kinetic energy, here

https://brainly.com/question/20411782

#SPJ4

Conductivity is a measure of a material's ability to conduct electricity, which is determined by the flow of charged particles. The correct answer is Option: 1.

The ability to conduct electricity does not depend on the size or shape of the material, but rather on its chemical composition and the mobility of its charged particles. On the other hand, width (Option 2), volume (Option 3), and mass (Option 4) are all size-dependent properties. Width and volume are directly proportional to the size of an object, while mass is a measure of the amount of matter in an object, which is also size-dependent. Hence option 1 is correct.

To know more about Conductivity, here

brainly.com/question/21496559

#SPJ1

--The complete Question is, Which property is size-independent?

1. conductivity

2. width

3. volume

4. mass​--

The temperature of the gas when the volume of the container increases to 1074 mL is 358.15 K or 85.0°C

The behavior of gases is affected by several factors including temperature, pressure, and volume. One important principle that applies to gases is that they tend to occupy the entire volume of their container. Therefore, if the volume of the container increases, the gas will occupy more space.

In this particular scenario, the gas initially occupies 900 mL at a temperature of 27.0°C. When the volume of the container increases to 1074 mL, we need to determine the corresponding temperature of the gas. To do this, we can use the formula:

(V1/T1) = (V2/T2)

Where V1 and T1 represent the initial volume and temperature of the gas, respectively, and V2 and T2 represent the final volume and temperature of the gas, respectively.

Substituting the given values into the formula, we get:

(900/300.15) = (1074/T2)

Simplifying the equation, we can cross-multiply and solve for T2:

900T2 = 1074 x 300.15

T2 = 1074 x 300.15 / 900

T2 = 358.15 K

Therefore, the temperature of the gas when the volume of the container increases to 1074 mL is 358.15 K or 85.0°C (rounded to one decimal place).

To know more about temperature, visit:

https://brainly.com/question/11464844#

#SPJ11

When a 7.15L balloon filled with gas is warmed from 256.1K to 297.1K, the volume of the gas inside the balloon increases to 8.27L.

The volume of the gas in the balloon can be calculated using the Ideal Gas Law, which states that the product of pressure, volume, and temperature is proportional to the number of molecules in the gas.

This law is expressed mathematically as PV = nRT, where P is the pressure of the gas, V is its volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature in Kelvin.

In this case, the pressure and number of molecules of the gas remain constant, so we can simplify the Ideal Gas Law to V1/T1 = V2/T2, where V1 is the initial volume of the gas, T1 is the initial temperature, V2 is the final volume of the gas, and T2 is the final temperature. Solving for V2, we get V2 = (V1 x T2) / T1.

Substituting the given values, we get V2 = (7.15L x 297.1K) / 256.1K = 8.27L. Therefore, the volume of the gas in the balloon after it is heated to 297.1K is 8.27L.

In conclusion, when a 7.15L balloon filled with gas is warmed from 256.1K to 297.1K, the volume of the gas inside the balloon increases to 8.27L.

To know more about volume, visit:

https://brainly.com/question/1578538#

#SPJ11

The empirical formula for this compound is H1O1.

To find the empirical formula of a compound with 94.1% oxygen and 5.9% hydrogen, we first assume a 100g sample. This gives us 94.1g of oxygen and 5.9g of hydrogen. Next, we'll convert these values to moles:

Oxygen: 94.1g / 16g/mol (molar mass of O) ≈ 5.88 moles
Hydrogen: 5.9g / 1g/mol (molar mass of H) ≈ 5.9 moles

Now, we'll find the mole ratio by dividing both values by the smallest number of moles:

Oxygen: 5.88 / 5.88 ≈ 1
Hydrogen: 5.9 / 5.88 ≈ 1

The empirical formula for this compound is H1O1, which can be simplified to H2O (water).

To learn more about hydrogen, refer below:

https://brainly.com/question/28937951

#SPJ11

The balanced molecular chemical equation for the reaction below is as follows;

H₂SO₄(aq) + 2CsOH(aq) → Cs₂SO₄(aq) + 2H₂O(l)

A chemical equation is a symbolic representation of a chemical reaction where reactants are represented on the left, and products on the right.

According to this question, a chemical equation occurs between sulfuric acid and caesium hydroxide to produce caesium sulphate and water.

The equation is said to be balanced when the number of atoms of each element on both sides of the equation are the same.

The balanced chemical equation of the reaction is as illustrated above.

Learn more about chemical equation at: https://brainly.com/question/28294176

#SPJ1

Answer:

Welcome to the project on communicating design details for the properties and uses of unsaturated hydrocarbons. This project aims to enhance your understanding of the characteristics and applications of unsaturated hydrocarbons.

Here are the steps to complete this project:

Step 1: Research

Research the different types of unsaturated hydrocarbons, including alkenes and alkynes. Find out their general properties, such as their reactivity, flammability, and solubility. Also, identify their uses in various industries, such as plastics, rubber, and fuel.

Step 2: Create a Design

Using your research findings, create a design to visually communicate the properties and uses of unsaturated hydrocarbons. You can use tools like Canva, PowerPoint, or other design software to create infographics, posters, or slideshows.

Step 3: Incorporate Key Information

Incorporate the key information you gathered in step 1 into your design. Make sure to include the following details:

Definitions of unsaturated hydrocarbons, alkenes, and alkynes

Properties of unsaturated hydrocarbons, including reactivity, flammability, and solubility

Applications of unsaturated hydrocarbons in various industries, such as plastics, rubber, and fuel

Examples of unsaturated hydrocarbons, such as ethene and propene for alkenes, and ethyne for alkynes

Step 4: Review and Refine

Review your design and refine it to make sure it effectively communicates the properties and uses of unsaturated hydrocarbons. Check for spelling and grammar errors, and ensure that the information is accurate and easy to understand.

Step 5: Present Your Design

Present your design to your class or teacher, and explain the properties and uses of unsaturated hydrocarbons. You can also invite feedback and questions to enhance your understanding of the topic.

In conclusion, the properties and uses of unsaturated hydrocarbons are essential for many industries. Through this project, you will gain a better understanding of unsaturated hydrocarbons and develop your communication skills to effectively present your findings. Good luck!

Explanation:

Answer:

Explanation:

The three types of unsaturated hydrocarbons is alkynes, alkenes, and aromatic hydrocarbons. Which is composed of alkynes? acetylene. brainlist

Lead (Pb) is able to react with different elements because it has a relatively low ionization energy, which means that it requires less energy to remove an electron from a lead atom compared to other elements.

Low ionization energy makes it more likely for lead to form compounds with other elements by giving up electrons or sharing them in covalent bonds. Additionally, lead has a relatively high atomic mass, which makes it more likely to form ionic compounds with lighter elements that have lower atomic masses.

The ability of lead to react with different elements also depends on the specific conditions under which the reaction occurs, such as temperature, pressure, and the presence of other reactants or catalysts.

Find out more on lead here: https://brainly.com/question/18110420

#SPJ1

Predicting the substances with the highest volatility, the substances you've provided are ethanol (CH3CH2OH), benzene (C6H6), dimethyl ether (CH3OCH3), and water (H2O). Among these, dimethyl ether (CH3OCH3) has the highest volatility. This is because volatility is directly related to the strength of intermolecular forces.

Dimethyl ether has weak Van der Waals forces, making it easier for molecules to evaporate from the liquid phase to the gas phase. Ethanol and water both have hydrogen bonding, while benzene has stronger dispersion forces, resulting in lower volatility for these substances.

For the substances with the highest surface tension, the provided substances are water (H2O), methane (CH4), dimethyl ether (CH3OCH3), and methanol (CH3OH). Among these, water (H2O) has the highest surface tension. Surface tension arises from the imbalance of intermolecular forces near the surface of a liquid.

Water has strong hydrogen bonding, causing the molecules at the surface to be attracted to each other, creating a high surface tension. Methane has weak Van der Waals forces, while dimethyl ether and methanol have intermediate forces between hydrogen bonding and Van der Waals forces, resulting in lower surface tensions for these substances.

To know more about highest volatility refer here

brainly.com/question/30354221#

#SPJ11

To solve this problem, we need to use the pH formula:

pH = -log[H+]

where [H+] represents the concentration of hydrogen ions in moles per liter (M).

To find [H+], we can rearrange the formula:

[H+] = 10^(-pH)

Substituting pH = 3.69, we get:

[H+] = 10^(-3.69) = 2.21 × 10^(-4) M

Since hydrochloric acid is a strong acid, it completely dissociates in water to give hydrogen ions and chloride ions:

HCl(aq) → H+(aq) + Cl-(aq)

Therefore, the concentration of hydrochloric acid required to give a solution with a pH of 3.69 is also 2.21 × 10^(-4) M.

The mass of copper sulfate in 30.0 cm3 of this solution is 0.957 g.

The concentration of the copper sulfate solution is given by:

c = n ÷ V

c = 0.100 mol/0.500 dm³

c = 0.200 mol/dm³

To calculate the mass of copper sulfate in 30.0 cm³ of this solution, we first need to calculate the number of moles of copper sulfate in this volume:

n = c x V

n = 0.200 mol/dm³ x (30.0 cm³ ÷ 1000 cm³/dm³)

n = 0.006 mol

The mass of copper sulfate can be calculated using its molar mass:

m = n x Mr

m = 0.006 mol x 159.5 g/mol

m = 0.957 g

To learn more about copper follow the link:

brainly.com/question/22560035

#SPJ4

Dalton's theory of the "indivisible" atom was refuted by the discovery of subatomic particles by J.J. Thompson and the Rutherford model.

Spectral lines of elements are discrete wavelengths of light, unlike the continuous spectrum of white light. Electrons in the ground state have the lowest energy, while those in the excited state have higher energy. The Balmer series produces specific wavelengths, frequencies, and energies when n2=3 and n1=2.

The wave number of a line in the Lyman series is 10282383.75 m^-1, with a frequency of 2.92 x 10^14 Hz and an energy of 1.94 x 10^-19 J. The nucleus accounts for an atom's mass, and the number of protons determines the element's identity.

Atomic masses are not whole numbers because they reflect the abundance of different isotopes. The atomic mass of magnesium is 24.31, calculated using the percent abundance and mass of each isotope.

Learn more about atomic masses, here:

https://brainly.com/question/17067547

#SPJ1

There are so many elements that can be able to bond with oxygen in a covalent manner as shown below.

Elements that can bond covalently with oxygen to form two-atom molecules include carbon (C), nitrogen (N), fluorine (F), chlorine (Cl), and many others.

The specific element that would form a covalent bond with oxygen depends on a variety of factors, including the electronegativity and valence electron configuration of the elements involved as shown.

Learn more about bonds:https://brainly.com/question/30480258

#SPJ1

The solvation of borax in water is an exothermic process. This means that energy is released when borax dissolves in water.

This can be seen in the fact that the temperature of the solution increases as borax dissolves in water, indicating that energy is being released into the surroundings.

The reason for this exothermic behavior is that the solvation process involves the breaking of the ionic bonds between borax molecules and the formation of new bonds between the borax ions and water molecules.

The energy released in the formation of these new bonds is greater than the energy required to break the existing bonds, resulting in a net release of energy.

To know more about borax refer to-

https://brainly.com/question/14724418

#SPJ11

Answer is B) 1:2

The electron configuration of magnesium is 1s2 2s2 2p6 3s2, which means it has two valence electrons that it can lose to form a cation with a +2 charge.

The electron configuration of sulfur is 1s2 2s2 2p6 3s2 3p4, which means it has six valence electrons that it can gain to form an anion with a -2 charge.

Since magnesium can form a cation with a +2 charge and sulfur can form an anion with a -2 charge, the ratio of metal cationic (+) atom to nonmetal anionic (-) atom in the compound will be 1:2. Therefore, the answer is b. 1:2.

To know more about electronic configuration:

https://brainly.com/question/26084288

#SPJ11

The mass of iron(III) sulfate comes out to be 899.73 g, the calculations are shown below.

Considering, the moles of Fe₂(SO₄)₃ to be 2.25 moles.

Molar mass of Fe₂(SO₄)₃ = 399.88 g/mol.

To calculate the number of moles, the below formula is used-

Number of moles = Mass/molar mass

Substituting the known values in the above equation as follows-

2.25 moles = Mass / 399.88 g/mol

Mass = 2.25 moles  x 399.88 g/mol

         = 899.73 g

Therefore, the mass of iron(III) sulfate comes out to be 899.73 g.

To learn more about molar mass check the link below-

https://brainly.com/question/837939

#SPJ4

At STP, 1.5 L of nitrogen gas will produce 3 L of NH₃ gas.

The balanced chemical equation for the reaction is N₂(g) + 3H₂(g) --> 2NH₃(g). According to the stoichiometry, 1 mole of nitrogen gas (N₂) reacts with 3 moles of hydrogen gas (H₂) to produce 2 moles of ammonia gas (NH₃). At STP, the volume of one mole of any gas is 22.4 L.

Step 1: Calculate the moles of N₂ in 1.5 L.
Moles of N₂ = (Volume of N₂ / 22.4 L/mol) = 1.5 L / 22.4 L/mol = 0.067 moles.

Step 2: Use the stoichiometry to find the moles of NH₃ formed.
Moles of NH₃ = 2 * Moles of N₂ = 2 * 0.067 moles = 0.134 moles.

Step 3: Calculate the volume of NH₃ formed at STP.
Volume of NH₃ = (Moles of NH₃ * 22.4 L/mol) = 0.134 moles * 22.4 L/mol = 3 L.

To know more about balanced chemical equation click on below link:

https://brainly.com/question/28294176#

#SPJ11

The volume of the 3.5 m solution containing 9.82 g of Pb(NO3)4 is about 4.103 mL.

To calculate the volume of the solution, we need to use the formula for molality:

Molality (m) = moles of solute / kg of solvent

First, we need to find the moles of Pb(NO3)4 in 9.82 g. The molar mass of Pb(NO3)4 is approximately 683.56 g/mol.

Moles of Pb(NO3)4 = 9.82 g / 683.56 g/mol ≈ 0.01436 mol

Now, we can use the given molality (3.5 m) to find the mass of the solvent:

0.01436 mol = 3.5 m * kg of solvent
kg of solvent = 0.01436 mol / 3.5 m ≈ 0.004103 kg

Since the solvent is water, we can assume that 1 kg of water is equal to 1 L. Therefore, the volume of the solution is:

0.004103 kg * 1000 mL/kg ≈ 4.103 mL

So, the volume of the 3.5 m solution containing 9.82 g of Pb(NO3)4 is approximately 4.103 mL.

To learn more about solvent, refer below:

https://brainly.com/question/30885015

#SPJ11

We need to dissolve 0.0405 mg mass of LiOH in 300.0 mL of water to get a solution with a pH of 11.25.

To find the mass of LiOH needed to make the solution, we need to first calculate the concentration of hydroxide ions in the solution using the pH value. Since pH = 11.25, the [OH⁻] concentration can be found by taking the negative logarithm of 11.25 and converting it to the concentration scale.

[tex][OH^-] = 10^{-11.25} = 5.62 \times 10^{-12} \, \text{M}[/tex]

Since LiOH is a strong base, it will dissociate completely in water, so the amount of LiOH needed can be calculated using the stoichiometry of the balanced equation:

LiOH + H₂O → Li⁺ + OH⁻ + H₂O

Thus, 1 mole of LiOH produces 1 mole of OH⁻. To achieve a concentration of 5.62 x 10⁻¹²M, we need 5.62 x 10⁻¹² moles of LiOH per mL of solution. Therefore, for 300.0 mL of solution, the number of moles of LiOH needed is:

[tex]\[5.62 \times 10^{-12} \, \text{mol/mL} \times 300.0 \, \text{mL} = 1.69 \times 10^{-9} \, \text{mol}\][/tex]

The molar mass of LiOH is 23.95 g/mol, so the mass of LiOH needed is:

1.69 x 10⁻⁹ mol x 23.95 g/mol = 4.05 x 10⁻⁸ g or 0.0405 mg (to 4 significant figures).

To know more about the LiOH refer here :

https://brainly.com/question/1686138#

#SPJ11

At 280 K and 1.50 atm, the mass of NaCl required to react with F₂ is 115.83 g; at STP, the mass of NaCl required to react with F₂ is 78.39 g.

Using the ideal gas equation, we will first determine the number of moles in F2:

Volume (V) = 15 L

Temperature (T) = 280 K

Pressure (P) = 1.5 atm

Gas constant (R) = 0.0821 atm.L/Kmol

Number of mole (n) =?  

                                F₂ + 2NaCl → Cl₂ + 2NaF

From the balanced equation above,

1 mole of F₂ reacted with 2 moles of NaCl.

0.98 mole of F₂ will react with = 0.98 × 2

                                          = 1.96 moles of NaCl

Mole of NaCl = 1.96 moles

Molar mass of NaCl = 58.5 g/mol

Mass of NaCl =?

At standard temperature and pressure (STP),

22.4 L = 1 mole of F₂

15 L = 15 / 22.4

15 L = 0.67 mole of F₂

                            F₂ + 2NaCl → Cl₂ + 2NaF

From the balanced equation above,

1 mole of F₂ reacted with 2 moles of NaCl.

0.67 mole of F₂ will react with = 0.67 × 2 = 1.34 moles of NaCl

Mole of NaCl = 1.34 moles

Molar mass of NaCl = 58.5 g/mol

Mass of NaCl =?

Learn more about ideal gas law:

brainly.com/question/4147359

#SPJ4

The first substance that Jake collected is likely a base. The slippery feel is a common characteristic of bases, and the ability to conduct electricity in water indicates the presence of ions (typically hydroxide ions, OH-) which are formed when the base dissolves in water.

The second substance that Jake collected is likely an acid. The formation of hydrogen gas when magnesium is added to an acid is a common characteristic of acids. The reaction can be written as:

Mg + 2HCl → MgCl2 + H2

where HCl represents hydrochloric acid. The production of hydrogen gas indicates the presence of H+ ions, which are characteristic of acids.

To know more about substance refer here

https://brainly.com/question/13320535#

#SPJ11

The initial volume is 15.36 L when the pressure changes from 101.3 kPₐ to 1.92 atm, and the final volume is 8.0 L, assuming constant temperature and number of moles.

To find the initial volume in liters when the pressure changes from 101.3 kPₐ to 1.92 atm, and the final volume is 8.0 L. We will assume constant temperature and number of moles.

Step 1: Convert the initial pressure to atm.
1 atm = 101.325 kPₐ, so:
(101.3 kPₐ) × (1 atm / 101.325 kPₐ) = 1.000 atm (approximately)

Step 2: Apply Boyle's Law, which states that P₁×V₁ = P₂×V₂ when temperature and moles are constant.
P₁ = 1.000 atm
P₂ = 1.92 atm
V₂ = 8.0 L

Step 3: Solve for the initial volume, V₁.
1.000 atm × V₁ = 1.92 atm × 8.0 L
V₁ = (1.92 atm * 8.0 L) / 1.000 atm
V₁ = 15.36 L

The initial volume is 15.36 L when the pressure changes from 101.3kPₐ to 1.92 atm, and the final volume is 8.0 L, assuming constant temperature and number of moles.

To know more about Boyle's Law :

https://brainly.com/question/1437490

#SPJ11

The best option to help you see if the crime scene sample can be linked to the suspect would be the suspect's twin brother. The correct answer choice is "The suspect’s twin brother"

This is because twins, specifically identical twins, share almost 100% of their DNA. Comparing the DNA sample from the crime scene to the twin brother's DNA would provide the most accurate and reliable indication of whether the suspect is linked to the crime scene or not.

Other family members, such as the cousin, grandfather, and stepmother, would share a lesser degree of genetic similarity with the suspect, making it less conclusive for establishing a link.

Therefore, "The suspect’s twin brother" is the correct answer choice.

For more such questions on crime scene, click on:

https://brainly.com/question/29025973

#SPJ11