in a controlled experiment do none of the variables change?

Answer:

7 Newton's East

Explanation:

when the force is going in the same direction in this case east, you add the forces.

Answer:

Convection

Explanation:

Answer:

C. Convection

Explanation:

I just did it

Answer:

102 m

Explanation:

Given that It takes a minimum distance of 48.96 m to stop a car moving at 12.0 m/s by applying the brakes (without locking the wheels). Assume that the same frictional forces apply and find the minimum stopping distance when the car is moving at 25.0 m/s.

Let the stopping distance be equal to S.

According to the definition of speed,

Speed = distance / time.

make time the subject of the formula

Time = distance / speed

then, the equivalent time is:

48.96 / 12 = S / 25

Cross multiply

12S = 48.96 x 25

12S = 1224

S = 1224 / 12

S = 102 m

Therefore, the stopping distance is 102 m

Answer:

b and d is wrong because if you sneezing and cough or other things like wiping your nose on your hand and touching things that other people touch can make people have the flu while you have it and edward jenner discovered cowpox and smallpox, not the flu

Explanation:

Answer:

rotation

Explanation:

The seasons of the year result from Earths movement, or rotation around the sun. The answer for the blanks is rotation .

The Earth orbits the Sun in a counterclockwise pattern above the Northern Hemisphere at an average distance of 149.60 million km.

The Earth revolves around its axis once every 24 hours and orbits the sun once every 365 days. The Earth's rotation on its axis, not its orbit around the sun, causes day and night.

The term 'one day' refers to the time it takes the Earth to rotate once on its axis, which includes both day and night.

A season is a division of the year that is based on variations in weather, ecology, and the number of daylight hours in a certain place.

Seasons on Earth are caused by Earth's orbit around the Sun and its axial tilt relative to the ecliptic plane.

The seasons of the year result from Earths movement, or rotation around the sun.

Hence, the answer for the blanks is rotation .

To learn more about the earth's orbit, refer to the link;

brainly.com/question/15022652

#SPJ2

Answer:

Fy = 14.3 [N]

Explanation:

To be able to solve this problem we must know that the force is a vector and has magnitude and direction, therefore it can be decomposed into the force in the X & y components:

When we have the components on the horizontal and vertical axes we must use the Pythagorean theorem.

[tex]F = \sqrt{F_{x}^{2} +F_{y}^{2} }[/tex]

where:

F = 15 [N]

Fx = horizontal component = 4.5 [N]

Fy = vertical component [N]

[tex]15=\sqrt{4.5^{2}+F_{y}^{2}}\\ 15^{2}= (\sqrt{4.5^{2}+F_{y}^{2}})^{2} \\225 = 4.5^{2}+F_{y} ^{2}\\ F_{y}^{2} =225 -4.5^{2}\\ F_{y}^{2}=204.75\\F_{y}=\sqrt{204.75}\\ F_{y}=14.3 [N][/tex]

Answer:

The average velocity of the stream with a depth of 10 feet is greater.

(a) is correct option.

Explanation:

Given that,

Depth [tex]h_{1}= 10\ feet[/tex]

Depth [tex]h_{2}=6\ feet[/tex]

We need to calculate the average velocity of the stream

According to question,

[tex]h_{1} > h_{2}[/tex]

The velocity for first case,

[tex]v_{1}=u_{1}\dfrac{x_{1}}{h_{1}}[/tex]

[tex]\dfrac{v_{1}}{x_{1}}=\dfrac{u_{1}}{h_{1}}[/tex]

The velocity for second case,

[tex]v_{2}=u_{2}\dfrac{x_{2}}{h_{2}}[/tex]

[tex]\dfrac{v_{2}}{x_{2}}=\dfrac{u_{2}}{h_{2}}[/tex]

For the same velocity profile,

[tex]\dfrac{dv}{dx}=\dfrac{v_{1}}{x_{1}}=\dfrac{v_{2}}{x_{2}}[/tex]

Then,

[tex]\dfrac{u_{1}}{h_{1}}=\dfrac{u_{2}}{h_{2}}[/tex]

Put the value into the formula

[tex]\dfrac{u_{1}}{10}=\dfrac{u_{2}}{6}[/tex]

[tex]u_{1}=\dfrac{5}{3}u_{2}[/tex]

[tex]u_{1}=1.67u_{2}[/tex]

The velocity is [tex]u_{1} > u_{2}[/tex]

We need to calculate the average velocity for first case

Using formula of average velocity

[tex]v_{avg}_{1}=\dfrac{0+u_{1}}{2}[/tex]

Put the value into the formula

[tex]v_{avg}_{1}=\dfrac{0+u_{1}}{2}[/tex]

[tex]v_{avg}_{1}=\dfrac{u_{1}}{2}[/tex]

We need to calculate the average velocity for second case

Using formula of average velocity

[tex]v_{avg}_{2}=\dfrac{0+u_{2}}{2}[/tex]

Put the value into the formula

[tex]v_{avg}_{2}=\dfrac{0+u_{2}}{2}[/tex]

[tex]v_{avg}_{2}=\dfrac{u_{2}}{2}[/tex]

If [tex]u_{1} > u_{2}[/tex] then [tex]\dfrac{u_{1}}{2} >\dfrac{u_{2}}{2}[/tex]

So, we can say that the average velocity of the stream with a depth of 10 feet will be greater than the stream with a depth of 6 feet.

Hence, The average velocity of the stream with a depth of 10 feet is greater.

(a) is correct option.

Answer:

21 s.

I hope this helps!

Answer:21s

Explanation:

Answer:

2.83kg

Explanation:

Answer:

2.83kg

Explanation:

Given

initial density = 1.18 kg/m3

Final density in the tank = 4.95 kg/m3.

Let us write the mass balance first.

Change in the mass of the system=mass of the air entering the system - Mass of air out the system

Mass that entered= M2 - M1

But DENSITY= MASS/ VOLUME

Mass= volume × Density

We can expressed the mass in terms of density since density is given in the question.

Mass that entered= (volume × density)2 - ( volume × density)1

= (V ρ)2 - (V ρ)1

But V1= V2 the volume remains the same

= ( ρ2 - ρ1)v

= (4.95 kg/m3 - 1.18 kg/m3) 0.75 m3

= 3.77× 0.75

= 2.8275kg

Mass that entered= 2.83kg

therefore, mass of air that has entered the tank= 2.83kg

Answer:

25.  Approximately 8.1 meters

26. North 1.31 km, and East 2.81 km

Explanation:

25.

Notice that the displacements: 6 meters east and 5.4 south create the legs of a right angle triangle. The hypotenuse of that triangle will be the distance (d) needed to cover in order to get the ball in the hole in one putt. That is:

[tex]d=\sqrt{6^2+5.4^2} =\sqrt{65.16} \approx 8.072\,\,\,m[/tex]

which can be rounded to 8.1 m.

26.

Notice that the 3.1 km at an angle of 25 degrees north of east, is the hypotenuse of a right angle triangle that has for legs the east and north components of that distance.

We can find the leg corresponding to the east displacement using the cosine function (that relates adjacent side with hypotenuse):

[tex]east\,\, comp=3.1 * cos(25^o)\approx 2.809\,\,km[/tex]

and we can calculate the north component using the sine function that relates the opposite side to the angle with the hypotenuse.

[tex]north\,\,component = 3.1 * sin(25^o) \approx 1.31 \,\,km[/tex]

Answer:

40.0⁰

Explanation:

The formula for calculating the magnetic flux is expressed as:

[tex]\phi = BAcos\theta[/tex] where:

[tex]\phi[/tex] is the magnetic flux

B is the magnetic field

A is the cross sectional area

[tex]\theta[/tex] is the angle that the normal to the plane of the loop make with the direction of the magnetic field.

Given

A = 0.250m²

B = 0.020T

[tex]\phi[/tex] = 3.83 × 10⁻³T· m²

3.83 × 10⁻³ = 0.020*0.250cosθ

3.83 × 10⁻³ = 0.005cosθ

cosθ = 0.00383/0.005

cosθ = 0.766

θ = cos⁻¹0.766

θ = 40.0⁰

Hence the angle normal to the plane of the loop make with the direction of the magnetic field is 40.0⁰

Answer:False

Explanation:

Answer:

False

Explanation:

Answer:

A) m[tex]_{T}[/tex] = 0.3025 * 0.0476 * 92.13 = 1.327 Ibm

B) T= 63.32°F

Explanation:

Given data:

1000 gallon tank currently contains 100.0 gallons of liquid toluene

and A gas saturated with toluene vapor at 85°F and 1 atm

A) Calculate quantity of toluene ( Ibm ) that will enter the atmosphere when the tank is filled

m[tex]_{T}[/tex] = [tex]n_{gas} * Y_{T} * M_{T}[/tex]

[tex]n_{gas}[/tex] (total mole of gas) = 0.3025 Ib-mole  ( calculated using : [tex]\frac{PV}{RT}[/tex] )

[tex]Y_{T}[/tex] (mole fraction of toluene) = 0.0476 ( calculated using [tex]\frac{P_{T} }{P}[/tex] )

M[tex]_{T}[/tex] = 92.13 Ibm/Ib-mole

therefore:  m[tex]_{T}[/tex] = 0.3025 * 0.0476 * 92.13 = 1.327 Ibm

B) using Antoine equation to solve for T

Antoine equation : [tex]log_{10} (P_{T} ) = A - \frac{B}{T+C}[/tex]

PT( partial pressure ) = 18.95 ( calculated using : [tex]y_{tb} * P[/tex] )

A = 6.95805

B = 1346.773

T = ?

C = 219.693

to calculate T make T the subject the subject of the equation

T + 219.693 = 1346.773 / 5.68044

∴ T = 17.40°C

convert T to Fahrenheit

T = 1.8 * 17.40 +32

  = 63.32°F

The statement about making of protein on small structure by cell is True.

Therefore, vesicles helps in movement of molecules.

Learn more at: https://brainly.com/question/14540310?referrer=searchResults

Answer:

the answer is 1 and 4

Explanation

Plato users

For the potential energy, statement 1 and statement 4 are correct.

The potential energy of the object the energy of the object in its steady position. When the object is at rest, the energy of the object in that condition is called potential energy.

Let us consider an electron having charge [tex]e[/tex] is moving the distance [tex]d[/tex] in uniform electric field E.

Its potential energy can be written as,

[tex]P = eEd[/tex]

Where P is the potential energy and E is the electric field.

Hence, the potential energy of the electron is associated with the electric field.

The electric force can be written as,

[tex]F =eE[/tex]

Where [tex]F[/tex] is the electric force, [tex]E[/tex] is the electric field and [tex]e[/tex] is the charge on the electron.

So, the potential energy can be written as,

[tex]P=Fd[/tex]

Hence, the potential energy is related to electric force.

For more information, follow the link given below.

https://brainly.com/question/1413008.

Answer:

I dont know sorry,I hope you find what are you looking for.

Answer: C.

Explanation:

For a parallel-plate capacitor where the distance between the plates is d.

The capacitance is:

C = e*A/d

You can see that the distance is in the denominator, then if we double the distance, the capacitance halves.

Now, the stored energy can be written as:

E = (1/2)*Q^2/C

Now you can see that in this case, the capacitance is in the denominator, then we can rewrite this as:

E = (1/2)*Q^2*d/(e*A)

e is a constant, A is the area of the plates, that is also constant, and Q is the charge, that can not change because the capacitor is disconnected.

Then we can define:

K = (1/2)*Q^2/(e*A)

And now we can write the energy as:

E = K*d

Then the energy is proportional to the distance between the plates, this means that if we double the distance, we also double the energy.

If the plates are pulled apart to twice their original separation, then this will double the stored energy. Hence, option (C) is correct.

The given problem is based on the concept of parallel plat capacitor. For a parallel-plate capacitor where the distance between the plates is d.

The capacitance is:

C = e*A/d

here.

e is the permittivity of free space.

Since, the distance is inversely proportional then if we double the distance, the capacitance halves.  Now, the stored energy can be given as,

E = (1/2)*Q^2/C

here,

Q is the charge stored in the capacitor.

Now you can see that in this case, the capacitance is in the denominator, then we can rewrite this as:

E = (1/2)*Q^2*d/(e*A)

e is a constant, A is the area of the plates, that is also constant, and Q is the charge, that can not change because the capacitor is disconnected.

Then we can define:

K = (1/2)*Q^2/(e*A)

And now we can write the energy as:

E = K*d

So, the energy is proportional to the distance between the plates.

Thus, we can conclude that if the plates are pulled apart to twice their original separation, then this will double the stored energy. Hence, option (C) is correct.

Learn more about the energy stored in a capacitor here:

https://brainly.com/question/3611251

Answer:acbd

Explanation:

Answer:

Plasma, which constitutes 55% of blood fluid, is mostly water (92% by volume), and contains proteins, glucose, mineral ions, hormones, carbon dioxide (plasma being the main medium for excretory product transportation), and blood cells themselves.

Explanation:

Capillary motion is crucial for circulating water. Your body's cells would not hydrate without this flow, and crucial communication between your brain and body would slack off, hence blood contains water 92% water helps in capillary action.

Capillary action, also known as capillary effect or motion, is the process by which liquid moves through constricted areas without the aid of external forces like gravity but rather with the help of intermolecular forces that exist between the liquid and solid surface (s).

Adhesion: The attraction of two different molecules, such as the hydrogen and oxygen molecules found in water and plastic drinking straws.

Proteins, glucose, mineral ions, hormones, carbon dioxide (plasma is the principal medium for excretory product transfer), and blood cells themselves are contained in plasma, which makes up 55% of blood fluid. Plasma is mostly water (92% by volume) and contains water as well as several other substances.

Therefore, the water contains in the blood helps in capillary action.

To know more about Capillary action:

https://brainly.com/question/13228277

#SPJ2

Answer:

The vertical distance is  [tex]d = \frac{2}{k} *[mg + f][/tex]

Explanation:

From the question we are told that

   The mass of the cylinder is  m

    The kinetic frictional force is  f

Generally from the work energy theorem

    [tex]E  =  P +  W_f[/tex]

Here E the the energy of the spring which is increasing and this is mathematically represented as

       [tex]E =  \frac{1}{2} * k  *  d^2[/tex]

Here k is the spring constant

        P is the potential energy of the cylinder which is mathematically represented as

     [tex]P  = mgd[/tex]

And

     [tex]W_f[/tex]  is the workdone by friction which is mathematically represented as

      [tex]W_f  =  f *  d[/tex]

So

    [tex] \frac{1}{2} * k  *  d^2 =  mgd +  f *  d [/tex]

=>    [tex] \frac{1}{2} * k  *  d^2 =  d[mg +  f    ][/tex]

=>  [tex] \frac{1}{2} * k  *  d =  [mg +  f    ][/tex]

=> [tex]d = \frac{2}{k} *[mg + f][/tex]

Complete question is;

The gravitational force acting on a lead ball is much larger than that acting on a wooden ball of the same size. Which statement is true about when they are dropped?

A) The acceleration due to gravity is the same for both balls.

B) The lead ball’s acceleration due to gravity is larger than the wooden ball’s.

C) The lead ball’s acceleration due to gravity is less than the wooden ball’s.

Answer:

Option A) The acceleration due to gravity is the same for both balls.

Explanation:

Density of Lead is 11.34 g/cm³ while density of hard wood is around 1.3 g/cm³

Thus, it means lead is the heavier object when both have same masses.

We are told that the wood and lead both have same size but from the density given above, it's clear that the mass of the lead ball is more than that of the wooden ball and thus, the force from would be more for the lead ball than the wooden ball.

Now, If we were to measure the position of both balls when falling, we will observe that they do not fall fall with a constant speed. This is because they fall with a constant acceleration and as such the speed increases.

Therefore both balls will hit the ground at the same time because they both start from a position of rest and both will have the same acceleration.

Answer:

v₃ = 0.786 m/s

Explanation:

Here, we will use the law of conservation of momentum, which states the following:

Total Momentum of System Before Collision =

Total Momentum of System After Collision

m₁u₁ + m₂u₂ + m₃u₃ = m₁v₁ + m₂v₂ + m₃v₃

where,

m₁ = mass of bullet = 6.13 g = 0.00613 kg

m₂ = mass of 1st block = 1233 g = 1.233 kg

m₃ = mass of 2nd block = 1646 g = 1.646 kg

u₁ = speed of first bullet before collision = 361 m/s

u₂ = speed of first block before collision = 0 m/s

u₃ = speed of 2nd block before collision = 0 m/s

v₁ = speed of bullet after collision

v₂ = speed of 1st block after collision = 0.741 m/s

v₃ = speed of 2nd block after collision = ?

Therefore,

(0.00613 kg)(361 m/s) + (1.233 kg)(0 m/s) + (1.646 kg)(0 m/s) = (0.00613 kg)(v₁) + (1.233 kg)(0.741 m/s) + (1.646 kg)(v₃)

2.2129 kg m/s + 0 kg m/s + 0 kg m/s - 0.9136 kg m/s = (0.00613 kg)(v₁) + (1.233 kg)(0.741 m/s) + (1.646 kg)(v₃)

1.2992 kg m/s = (0.00613 kg)(v₁) + (1.646 kg)(v₃)

since, the bullet is embedded in 2nd block after collision. Thus, there velocities will become same. (v₁ = v₃)

Therefore,

1.2992 kg m/s = (0.00613 kg)(v₃) + (1.646 kg)(v₃)

v₃ = (1.2992 kg m/s)/(1.6521 kg)

v₃ = 0.786 m/s

Answer:

king crimson

Explanation:

bc

Explanation:

It could go either way.

King crimsons ability is to see into the future and erase something, changing the outcome, while The Worlds ability is to Stop time. I believe DIO would beat Diavolo,but thats if certain requirements are met.Like, the fight being at night, but if Diavolo got a good combo of attacks on DIO, theres a high chance he would kill DIO, but DIO could end the fight in seconds by stopping time and killing him in his Stopped time, or his World, hope this helped

Answer:

Taking a look at Newton's third law of motion which states "for every force exerted, their is an opposite force equal in magnitude and opposite in direction on the first force".

Similarly if a bullet had enough forces behind it to hurl someone through the air when they were hit, a similar force would act on the person holding the gun that fired the bullet.  

What we load into the gun is called a 'cartridge' Each piece is composed of four basic substance the casing, the bullet, the primer, and the powder.  

The primer explodes lighting the powder which causes a buildup of pressure behind the bullet. This powder can be used in rifle cartages because the bullet chamber is designed to withstand greater pressures.  

It is difficult in practice to measure the forces within a gun bagel, but the one easily measured parameter is the velocity with which the bullet exits muzzle velocity, therefore assuming that even if a handgun cartridge which generate enough momentum for the bullet to do this,  it is still nonsense on screen in Hollywood and video.  

Answer:

1.5m/s^2

Explanation:

Answer:

1.5 m/s2. accerelation =force ÷mass

Answer :

0.5 Ω

Explanation:

The following data were obtained from the question:

Voltage (V) = 7.2 V

Current (I) = 14.4 A

Resistance (R) =..?

The resistance of the motor can be obtained by applying the ohm's law equation as shown below:

V = IR

7.2 = 14.4 × R

Divide both side by 14.4

R = 7.2/14.4

R = 0.5 Ω

Therefore, the resistance is 0.5 Ω

Answer:

Answer :

0.5 Ω

Explanation:

The following data were obtained from the question:

Voltage (V) = 7.2 V

Current (I) = 14.4 A

Resistance (R) =..?

The resistance of the motor can be obtained by applying the ohm's law equation as shown below:

V = IR

7.2 = 14.4 × R

Divide both side by 14.4

R = 7.2/14.4

R = 0.5 Ω

Therefore, the resistance is 0.5 Ω

Answer:

using sand

Explanation:

We can increase friction by making rough surface.

Answer:

Hyperbole

Explanation:

this is an extreme exaggeration or overstatement/ magnification