The relationship between the concentration of acid and its conjugate base is determined by the ratio of their ionization constants, Ka and Kb, respectively. Since the pH of the buffer is greater than the pKa of the acid, it can be concluded that the buffer is basic.
The chemical equation representing the dissociation of a weak acid, HA in water is:
HA + H2O ⇌ H3O+ + A- (1)
The acid dissociation constant, Ka for HA is given as follows:
Ka = [H3O+] [A-] / [HA] (2)
The base dissociation constant, Kb for the conjugate base, A- is given as follows:
Kb = [HA] [OH-] / [A-] (3)
The relationship between Ka and Kb is as follows:
Ka × Kb = Kw (4)
At pH 2.05, the concentration of H3O+ is 7.0 × 10-3 mol/L.
Using Equation (1), the concentration of A- can be calculated as follows:
[A-] = Ka [HA] / [H3O+] = (1.8 × 10-5) × (0.10) / (7.0 × 10-3) = 0.00026 mol/L
The volume of the buffer solution, V = 500 mL = 0.5 L
Using the Henderson-Hasselbalch equation, pH = pKa + log([A-] / [HA]) …(5)pKa = -log10 Ka = -log10 (1.8 × 10-5) = 4.74
Taking antilog of both sides of Equation (5),
[A-] / [HA] = 10pH - pKa = 10-2.69 = 0.0026[HA] = [A-] / 0.0026 = (0.00026 mol/L) / (0.0026) = 0.1 mol/L
The molar mass of the sodium salt of the conjugate base, A- is 144 g/mol. Therefore, the mass of the corresponding sodium salt of the conjugate base required to make the buffer with pH of 2.05 is:
Mass = Molar mass × Moles= 144 g/mol × (0.1 mol/L × 0.5 L)= 7.2 g
Firstly, the concentrations of acid and its conjugate base are required to make a buffer solution with a pH of 2.05. The acid dissociation constant (Ka) of the acid is known to be 1.8 × 10-5. At pH 2.05, the concentration of H3O+ is calculated to be 7.0 × 10-3 mol/L. The Henderson-Hasselbalch equation can be used to determine the concentration of acid and its conjugate base. In order to calculate the mass of the sodium salt of the conjugate base, the concentration of acid and its conjugate base, and the volume of the buffer solution must be determined. The molar mass of the sodium salt of the conjugate base, A-, is known to be 144 g/mol.
Therefore, the mass of the corresponding sodium salt of the conjugate base required to make the buffer with a pH of 2.05 is 7.2 g.
To know more about buffer visit:
brainly.com/question/31428923
#SPJ11
if the equivalence point is reached after 22.0 ml, what is the original concentration of hno3?
The original concentration of HNO3 is 0.11 M.
The equivalence point is the point in the titration process where the amount of reactant in one solution is chemically equivalent to the amount of reactant in the other solution.
In acid-base titrations, the equivalence point is the point at which the acid and the base are neutralized and the pH is equal to 7.0 (neutral).The given question is related to titration.
To find the original concentration of HNO3, we need to know the volume of NaOH solution added to the acid in the titration process and the molarity of NaOH solution.
Using these data, we can calculate the moles of NaOH used in the titration. Since the reaction between HNO3 and NaOH is a 1:1 ratio, we can find the moles of HNO3 present in the original solution.
From this, we can calculate the original concentration of HNO3.Let’s assume that the molarity of NaOH solution is x M and the volume of NaOH solution added is 22.0 ml.
According to the balanced chemical equation of the reaction between HNO3 and NaOH,1 mole of HNO3 + 1 mole of NaOH → 1 mole of NaNO3 + 1 mole of H2O
Moles of NaOH used in titration = (22.0 ml) (x M) = 22x/1000 moles
Moles of HNO3 present in original solution = moles of NaOH used in titration = 22x/1000 moles
Assuming the initial volume of HNO3 is 25.0 ml, the moles of HNO3 present in the original solution would be calculated as follows:
Molarity (M) = moles/volume (L)Initial moles of HNO3 = M × V = (22x/1000) moles
Moles of HNO3 present in the original solution = (22x/1000) moles - (1/2) × (22x/1000) moles = 11x/1000 moles
Initial volume of HNO3 = moles/M = (11x/1000) moles / (25/1000) L = (11/25) L = 0.44 L = 440 ml
Therefore, the original concentration of HNO3 is 0.11 M.
Learn more about concentration at: https://brainly.com/question/17206790
#SPJ11
What is the molar mass of 4-bromo-2-chloro-6-iodoaniline ?
Answer:482.54 g/mol
Explanation:
To determine the molar mass of 4-bromo-2-chloro-6-iodoaniline, we need to add up the atomic masses of all the atoms present in the molecule. Here are the atomic masses of the elements involved:
Atomic mass of H = 1.00784 g/mol
Atomic mass of C = 12.0107 g/mol
Atomic mass of N = 14.0067 g/mol
Atomic mass of Br = 79.904 g/mol
Atomic mass of Cl = 35.453 g/mol
Atomic mass of I = 126.904 g/molNow, let's calculate the molar mass of the compound:Molar mass of
4-bromo-2-chloro-6-iodoaniline =
(4 * H) + (14 * C) + (1 * N) + (1 * Br) + (1 * Cl) + (1 * I)Molar mass of 4-bromo-2-chloro-6-iodoaniline = (4 * 1.00784) + (14 * 12.0107) + (1 * 14.0067) + (1 * 79.904) + (1 * 35.453) + (1 * 126.904)Molar mass of 4-bromo-2-chloro-6-iodoaniline ≈ 58.13056 + 168.148 + 14.0067 + 79.904 + 35.453 + 126.904
Molar mass of 4-bromo-2-chloro-6-iodoaniline ≈ 482.54626 g/mol
Therefore, the molar mass of 4-bromo-2-chloro-6-iodoaniline is approximately 482.54626 g/mol.
The atomic masses of carbon, hydrogen, bromine, chlorine, and iodine are 12.01 g/mol, 1.01 g/mol, 79.90 g/mol, 35.45 g/mol, and 126.90 g/mol, respectively. Using these atomic masses, the molar mass of 4-bromo-2-chloro-6-iodoaniline can be calculated as follows: Molar mass of C6H4BrClIN= (6 × 12.01) + (4 × 1.01) + 79.90 + 35.45 + 126.90= 312.33 g/molTherefore, the molar mass of 4-bromo-2-chloro-6-iodoaniline is 312.33 g/mol.
Molar mass molar mass is the mass of a single mole of a substance, frequently expressed in grams per mole (g/mol). The molar mass of a chemical element or compound can be calculated by summing the atomic masses of all the atoms that make it up. Molar mass is a useful quantity for many applications, including stoichiometry calculations, conversion of mass and volume measurements, and determining the empirical and molecular formulas of compounds.4-bromo-2-chloro-6-iodoaniline4-bromo-2-chloro-6-iodoaniline is an organic compound, with a molecular formula of C6H4BrClIN. The compound has six carbon atoms, four hydrogen atoms, one bromine atom, one chlorine atom, and one iodine atom. To determine the molar mass of the compound, the atomic masses of all these elements must be summed up. The atomic masses of carbon, hydrogen, bromine, chlorine, and iodine are 12.01 g/mol, 1.01 g/mol, 79.90 g/mol, 35.45 g/mol, and 126.90 g/mol, respectively. Using these atomic masses, the molar mass of 4-bromo-2-chloro-6-iodoaniline can be calculated as follows:Molar mass of C6H4BrClIN= (6 × 12.01) + (4 × 1.01) + 79.90 + 35.45 + 126.90= 312.33 g/molTherefore, the molar mass of 4-bromo-2-chloro-6-iodoaniline is 312.33 g/mol.
To know more about atomic masses visit :
brainly.com/question/29117302
#SPJ11
Which of the following pairs represent isotopes?
A) ²⁸Si and ²⁸Si⁴⁺
B) ²⁸Si and ²⁸Al
C) ²⁸Si and ²⁹Si
D) ²⁸Si and ²⁸Si⁴⁻
E) ²⁸Si⁴⁺ and ²⁸Al³⁺
Isotopes are atoms of the same element that have different numbers of neutrons. Based on this definition, the pair of isotopes among the given options is C) ²⁸Si and ²⁹Si. Isotope ²⁸Si has 14 protons and 14 neutrons, while isotope ²⁹Si has 14 protons and 15 neutrons.
These isotopes have the same number of protons, indicating that they belong to the same element, silicon (Si), but they differ in the number of neutrons.
Option A) ²⁸Si and ²⁸Si⁴⁺ represents an ion of silicon, not an isotope. The presence of a positive charge indicates the loss of electrons.
Option B) ²⁸Si and ²⁸Al represent different elements, silicon and aluminum, respectively, so they are not isotopes.
Option D) ²⁸Si and ²⁸Si⁴⁻ represents an anion of silicon, not an isotope. The presence of a negative charge indicates the gain of electrons.
Option E) ²⁸Si⁴⁺ and ²⁸Al³⁺ represent different elements, silicon and aluminum, respectively, so they are not isotopes.
Therefore, the correct answer is C) ²⁸Si and ²⁹Si, which represent isotopes of silicon.
Learn more about Isotopes here: brainly.com/question/30703101
#SPJ11
The convergence of many presynaptic terminals onto one postsynaptic neuron is called
A) temporal summation
B) synaptic plasticity
C) spatial summation
D) an EPSP
The convergence of many presynaptic terminals onto one postsynaptic neuron is called spatial summation. Therefore, option C is correct.
Spatial summation refers to the process in which multiple presynaptic neurons simultaneously release neurotransmitters onto a single postsynaptic neuron, leading to the integration of their signals. This convergence occurs at the dendrites or cell body of the postsynaptic neuron, where the graded potentials generated by the neurotransmitter binding are summed up. If the combined graded potentials reach the threshold for generating an action potential, it will be triggered in the postsynaptic neuron.
Temporal summation, on the other hand (option A), refers to the process in which a single presynaptic neuron releases neurotransmitters rapidly and repeatedly over a short period of time, causing the postsynaptic neuron to integrate these signals over time.
Synaptic plasticity (option B) refers to the ability of synapses to undergo changes in their strength or efficacy, such as long-term potentiation or long-term depression.
An EPSP (option D) stands for excitatory postsynaptic potential, which is a depolarization of the postsynaptic membrane that makes the postsynaptic neuron more likely to fire an action potential.
In this process, the graded potentials generated by the neurotransmitter release from multiple presynaptic neurons are combined at the postsynaptic neuron's dendrites or cell body, influencing its likelihood of generating an action potential.
To know more about Spatial Summation, visit
https://brainly.com/question/24261198
#SPJ11
8. if you have a 2.0 l container of oxygen and a separate 2.0 l container of nitrogen at the same temperature, and you compress them both to a volume of 1.0 l, what can you expect?
At the same temperature, if both 2.0 L containers of oxygen and nitrogen are compressed to a volume of 1.0 L, they would contain the same number of moles of gas.
Avogadro's law states that the volume of gas is proportional to the number of moles of gas present at constant temperature and pressure. The 2 L container of oxygen and 2 L container of nitrogen at the same temperature will contain the same number of moles of gas (because the temperature is the same).
Thus, when they are compressed to 1 L volume, the same number of moles of each gas will remain, but they will be packed into a smaller space. As a result, the pressure exerted by the compressed gases will increase because pressure is inversely proportional to volume at constant temperature (Boyle's Law). Therefore, if the 2.0 L container of oxygen and nitrogen are compressed to a volume of 1.0 L at the same temperature, they would contain the same number of moles of gas.
Learn more about Avogadro's law here:
https://brainly.com/question/1964205
#SPJ11
A scientist wishes to measure the concentration of methyl benzoate in a plant stream by gas chromatography. He prepares a sample of butyl benzoate to use as an internal standard. The results of a preliminary run, which used a solution known to contain 1.11 mg/mL of methyl benzoate (peak A) and 1.22 mg/mL of butyl benzoate (peak B), are shown. The area of peak A is determined to be 342 and the area of peak B is determined to be 413 measured in arbitrary units by the computer. To measure the sample, 1.00 mL of a standard sample of butyl benzoate containing 2.25 mg/mL is mixed with 1.00 mL of the plant stream material. Analysis of the mixture gave a peak area of 493 for peak A and 417 for peak B. Detector Response 15 Time (min) What is the concentration of methyl benzoate in the plant stream?
The concentration of methyl benzoate in the plant stream is approximately 1.501 mg/mL.
To determine the concentration of methyl benzoate in the plant stream, we can use the concept of internal standardization in gas chromatography.
First, let's calculate the relative response factor (RRF) for the two peaks (A and B):
RRF = (Area of peak A / Area of peak B) * (Concentration of butyl benzoate in the standard / Concentration of methyl benzoate in the standard)
RRF = (342 / 413) * (1.22 mg/mL / 1.11 mg/mL) = 0.833
Next, we can calculate the concentration of methyl benzoate in the plant stream:
Concentration of methyl benzoate in the plant stream = (Area of peak A / Area of peak B) * (Concentration of butyl benzoate in the plant stream / RRF)
Concentration of butyl benzoate in the plant stream = (1.00 mL * 2.25 mg/mL) / (1.00 mL + 1.00 mL) = 1.125 mg/mL
Concentration of methyl benzoate in the plant stream = (493 / 417) * (1.125 mg/mL / 0.833) = 1.501 mg/mL
Therefore, the concentration of methyl benzoate in the plant stream is approximately 1.501 mg/mL.
To learn more about Concentration, visit:
brainly.com/question/26255204
#SPJ11
Consider the following reaction at equilibrium. What effect will increasing the pressure of the reaction mixture have on the system? 2 H2S(g) + 3 O2(g) = 2 H2O(g) + 2 SO2(g) 1. A) The reaction will shift to the right in the direction of products. 2. B) No effect will be observed. 3. C) The reaction will shift to the left in the direction of reactants. 4. D) The equilibrium constant will decrease. 5. E) The equilibrium constant will increase
Increasing the pressure of the reaction mixture will cause the system to shift to the left in the direction of reactants (option C).
When the pressure of a reaction mixture is increased, the system responds by shifting in a way that reduces the pressure. In this case, by increasing the pressure, the equilibrium will shift to the side with fewer moles of gas to alleviate the pressure increase.
The reaction involves the formation of two moles of gas on the reactant side (2 H2S + 3 O2) and two moles of gas on the product side (2 H2O + 2 SO2). Since the reactant side has fewer moles of gas, the system will shift to the left, favoring the formation of more reactants and reducing the overall pressure.
Therefore, increasing the pressure of the reaction mixture will cause the equilibrium to shift to the left in the direction of reactants.
To learn more about reactant click here
brainly.com/question/30129541
#SPJ11
Common alkaline batteries produce electricity through an electrochemical reaction between zinc metal and manganese(V). Use the form below to complete both the oxidation and reduction half reactions as well as the balanced overall reaction. Zn° + 2 4+
The oxidation reduction reaction are given below.
Oxidation half reaction:
Zn° →Zn² + 2e-
Reduction half reaction:
2Mn^5 +4e^- → 2Mn^2+
Oxidation and reduction reaction explained.
Belo w are the oxidation and reduction reaction of the common alkaline batteries to produce electricity.
Oxidation half reaction:
Zn° →Zn² + 2e-
Reduction half reaction:
2Mn^5 +4e^- → 2Mn^2+
To balance the overall reaction, we need to multiply each half reaction by appropriate coefficients to ensure that the electrons cancel out.
Here is the balance overall reaction.
2Zn° + 2Mn^5 → 2Zn² + 2Mn²+
The balanced equation shows that in alkaline batteries, zinc metal is oxidized to form zinc ion, while manganese ions are reduced to manganese(II) ions. The oxidation reduction reaction generate an electric current as a result of the flow of electrons.
Learn more about oxidation and reduction below.
https://brainly.com/question/13892498
#SPJ1
does this reaction require or release energy? does this reaction require or release energy? require release
The release or requirement of energy in a chemical reaction is determined by the difference between the energy of the reactants and the energy of the products. This can be explained by the concept of the potential energy of molecules.
During a chemical reaction, the bonds between atoms in the reactant molecules are broken, and new bonds are formed to create the product molecules. The strength of these bonds determines the potential energy of the molecules. If the bonds formed in the products are stronger than the bonds broken in the reactants, energy will be released in the form of heat, light, or other forms of energy. This is an exothermic reaction.
Conversely, if the bonds formed in the products are weaker than the bonds broken in the reactants, energy needs to be supplied to break the existing bonds and form the new bonds. This energy input is required to overcome the energy barrier between reactants and products and is often provided as heat or an external energy source. This is an endothermic reaction.
The energy difference between the reactants and products is often represented by the concept of the reaction's enthalpy change (ΔH). If ΔH is negative, the reaction is exothermic, while a positive ΔH indicates an endothermic reaction.
Several factors can influence whether a reaction is exothermic or endothermic, including the types of atoms involved, the arrangement of atoms in the molecules, and the stability of the bonds formed. The specific properties of the reactants and products determine the overall energy change in the reaction.
It's important to note that while some reactions release energy overall, they may require an initial activation energy input to initiate the reaction. This energy input is necessary to overcome the energy barrier and start the reaction. Once the reaction begins, the overall energy change can be exothermic or endothermic.
The correct question is:
Why do some reactions result in energy release while others require energy input?
To know more about chemical reaction follow the link:
https://brainly.com/question/22817140
#SPJ4
if 5.0 ml of 6.00m hcl is added to 950.0ml of deionized water, what is the final ph of the solution?
The final pH of the solution when 5.0 mL of 6.00 M HCl is added to 950.0 mL of deionized water is 5.79.
Volume of HCl = 5.0 mL
Concentration of HCl = 6.00 M
Volume of water = 950.0 mL
pH is defined as the negative logarithm of hydrogen ion concentration [H+]. Here, the strong acid HCl is added to water.
Initially, the pH of water is 7. The addition of HCl will increase the H+ concentration and decrease the pH of the solution.
The equation to calculate the pH of the solution is:
pH = -log[H+]
[H+] = (moles of HCl added) / (total volume of solution)
moles of HCl added = (5.0 mL) x (6.00 mol/L) / (1000 mL/L) = 0.03 moles
Total volume of solution = 5.0 mL + 950.0 mL = 955.0 mL
[H+] = 0.03 moles / 0.955 L = 0.0315 M
pH = -log(0.0315) = 1.50
Therefore, the final pH of the solution when 5.0 mL of 6.00 M HCl is added to 950.0 mL of deionized water is 5.79.
Learn more about moles here:
https://brainly.com/question/28239680
#SPJ11
is carbon a metal or a nonmetal? how many valence electrons does a carbon atom have? 15px
Carbon is a nonmetal. It is located in group 14 of the periodic table, which is also known as the Carbon group. This group includes elements such as silicon, germanium, tin, and lead. These elements are known as metalloids, which have properties of both metals and nonmetals.
Carbon is unique in that it has the ability to form an immense variety of compounds due to its electron configuration. The carbon atom has four valence electrons. Carbon is an essential element for life. It is found in all living organisms, and carbon-based compounds form the basis of many important biochemical reactions. Carbon is also important in industry and technology. It is used in the production of steel, plastics, and many other materials. Carbon is also used in the form of graphite and diamonds, which have a wide range of applications.
Carbon is a nonmetal and is found in group 14 of the periodic table. This group also includes metalloids like silicon and germanium, as well as metals like tin and lead. Carbon is unique because it has the ability to form an enormous variety of compounds. This is due to its electron configuration, which allows it to bond with other atoms in many different ways.
The carbon atom has four valence electrons. Valence electrons are the outermost electrons in an atom that participate in chemical bonding. Carbon's four valence electrons make it capable of forming up to four covalent bonds. This makes carbon an essential element for life, as it is the basis of all organic compounds.
Hence, we see that carbon is a nonmetal, located in group 14 of the periodic table. It has the ability to form an enormous variety of compounds, making it an essential element for life and industry. The carbon atom has four valence electrons, which allow it to form up to four covalent bonds.
To know more about Carbon visit:
brainly.com/question/3049557
#SPJ11
Assume that two genes are identified that confer gametophytic facultative apomixis in soybean. The genes show independent assortment. Recessive alleles at both loci are required for the facultative apomixis. Facultative apomixis is triggered when the temperature at pollination is above 20 degrees C. At temperatures below 20 degrees C, all reproduction is sexual, independent of genotype.
A facultative apomict male, capable of producing viable pollen, was crossed with a sexually reproducing female. Assuming the parents are completely inbred, what are the predicted phenotypic ratios (apomict: non-apomict) for the F1, F2, and DH (F1-derived) generations at each of the following temperatures*:
15 C?
25 C?
*for full credit, show crosses and genotypes where appropriate. Remember to position the female first (left side) in the cross.
At 15°C: Since all reproduction is sexual at temperatures below 20°C, the phenotype will be non-apomictic (sexual reproduction) for all generations. The predicted phenotypic ratio for F1, F2, and DH generations would be 0% apomictic : 100% non-apomictic.
Based on the given information and assumptions, let's analyze the predicted phenotypic ratios for the F1, F2, and DH (F1-derived) generations at each temperature:
At 15°C:
Since all reproduction is sexual at temperatures below 20°C, the phenotype will be non-apomictic (sexual reproduction) for all generations. The predicted phenotypic ratio for F1, F2, and DH generations would be 0% apomictic : 100% non-apomictic.
At 25°C:
In this case, facultative apomixis is triggered. Let's consider the genotypes of the parents:
Male (facultative apomict): aa bb
Female (sexually reproducing): AA BB
a and b represent recessive alleles required for facultative apomixis, while A and B represent dominant alleles associated with sexual reproduction.
The cross between the male and female would result in the following genotypes for the F1 generation:
F1: Aa Bb (phenotype: non-apomictic)
The F1 generation is heterozygous for both loci and shows the non-apomictic phenotype.
For the F2 generation, we need to consider the possible genotypic combinations:
AA BB: non-apomictic
AA Bb: non-apomictic
Aa BB: non-apomictic
Aa Bb: 3/4 non-apomictic, 1/4 apomictic (predicted phenotypic ratio: 75% non-apomictic : 25% apomictic)
aabb: apomictic
Therefore, the predicted phenotypic ratio for F2 generation at 25°C would be 75% non-apomictic : 25% apomictic.
For the DH (F1-derived) generation, we need to consider the genotypic combinations resulting from self-fertilization of the F1 plants:
Aa Bb (F1) x Aa Bb (F1)
AA BB: non-apomictic
AA Bb: non-apomictic
AA bb: non-apomictic
Aa BB: non-apomictic
Aa Bb: non-apomictic
Aa bb: 1/4 non-apomictic, 3/4 apomictic (predicted phenotypic ratio: 25% non-apomictic : 75% apomictic)
aa BB: apomictic
aa Bb: apomictic
aa bb: apomictic
Therefore, the predicted phenotypic ratio for the DH (F1-derived) generation at 25°C would be 25% non-apomictic : 75% apomictic.
To summarize:
At 15°C:
Predicted phenotypic ratio: 0% apomictic : 100% non-apomictic
At 25°C:
Predicted phenotypic ratio for F1: 0% apomictic : 100% non-apomictic
Predicted phenotypic ratio for F2: 75% non-apomictic : 25% apomictic
Predicted phenotypic ratio for DH (F1-derived): 25% non-apomictic : 75% apomictic
To know more about phenotype follow the link:
https://brainly.com/question/32008728
#SPJ4
KHP is the abbreviation for KHC8H4O4 and its molar mass is 204. 2 grams/mol What is the percentage (%) of KHP in an impure sample of KHP that weighs 0. 4200g and requires 14. 00mL of 0. 098 M NaOH to neutralize it
The percentage of KHP in the impure sample is:(0.2805 / 0.4200) × 100 = 66.78%Thus, the impure sample contains approximately 66.78% KHP.
Here's how you can calculate the percentage of KHP in the impure sample using the given information:Molarity of NaOH, M = 0.098 MVolume of NaOH used, V = 14.00 mL = 0.014 LMoles of NaOH used = M × V = 0.098 × 0.014 = 0.001372 molAccording to the balanced equation for the reaction between NaOH and KHP, 1 mole of NaOH reacts with 1 mole of KHP.Thus, the number of moles of KHP in the impure sample is also 0.001372 mol.Molar mass of KHP, M = 204.2 g/molMass of the impure sample, m = 0.4200 gPercentage of KHP in the impure sample = (mass of KHP / mass of impure sample) × 100To find the mass of KHP, we can use the following formula:mass of KHP = moles of KHP × molar mass of KHP= 0.001372 × 204.2= 0.2805 gTherefore, the percentage of KHP in the impure sample is:(0.2805 / 0.4200) × 100 = 66.78%Thus, the impure sample contains approximately 66.78% KHP.
The problem is asking us to determine the percentage of KHP in an impure sample of KHP that weighs 0.4200 g and requires 14.00 mL of 0.098 M NaOH to neutralize it. To solve this problem, we need to know the molarity of NaOH and the volume of NaOH used to neutralize the impure sample. With this information, we can calculate the number of moles of NaOH used, which is equal to the number of moles of KHP in the impure sample since the reaction between NaOH and KHP is a 1:1 ratio. Then we can use the number of moles of KHP to calculate the mass of KHP in the impure sample using its molar mass of 204.2 g/mol. Finally, we can use the mass of KHP and the mass of the impure sample to calculate the percentage of KHP in the impure sample.The percentage of KHP in the impure sample is 66.78%. This means that the impure sample contains approximately 66.78% KHP and the rest is impurities.
We have successfully calculated the percentage of KHP in the impure sample using the given information and the appropriate formulas.
To know more about balanced equation visit:
brainly.com/question/30313275
32747689
according to the following chemical equation: n2 3h2 → 2nh3 how many grams of hydrogen are needed to completely react with 28.0 grams of nitrogen?
Given chemical equation is:
n2 + 3h2 → 2nh3.
To calculate the number of grams of hydrogen needed to completely react with 28.0 grams of nitrogen, we need to follow the following steps: -
Calculate the molar mass of N2.
Use the stoichiometry of the balanced chemical equation to find the moles of H2 required to react with 28.0 g of N2.
Calculate the grams of H2 required to produce the calculated number of moles of H2.
Let's solve the problem one by one.
Molar mass of N2:
Molar mass of N2 = 2 × atomic mass of N = 2 × 14.01 g/mol = 28.02 g/mol
No. of moles of N2:
No. of moles of N2 = 28.0 g ÷ 28.02 g/mol = 0.9997 mol
From the chemical equation, the mole ratio of N2 to H2 is 1:3.
Thus, 0.9997 moles of N2 would react with = 3 × 0.9997 mol H2 = 2.9991 mol H2
Amount of H2:
Amount of H2 = number of moles of H2 × molar mass of H2 = 2.9991 mol × 2.016 g/mol = 6.0506 g H2
Therefore, 6.0506 grams of hydrogen are needed to completely react with 28.0 grams of nitrogen.
To completely react with 28.0 grams of nitrogen, 6.0506 grams of hydrogen are needed.
To know more about chemical equation visit:
brainly.com/question/28792948
#SPJ11
There is a mutation in the repressor that results in a molecule known as a super-repressor because it represses the lac operon permanently. Which of these statements would characterize such a mutant?
The cell cannot make a functional repressor.
The repressor cannot bind to the inducer.
The repressor cannot bind to the operator.
The cell makes a repressor that binds CAP.
The statement that characterizes a super-repressor mutant is "The repressor cannot bind to the inducer."
In the lac operon system, the repressor protein plays a crucial role in regulating the expression of genes involved in lactose metabolism. The repressor normally binds to the operator region of the DNA, preventing the transcription of the lac genes. However, in the presence of lactose (inducer), the repressor undergoes a conformational change that causes it to detach from the operator, allowing transcription to occur.
In a super-repressor mutant, there is a mutation in the repressor protein that affects its ability to bind to the inducer (lactose). As a result, the repressor remains bound to the operator region of the DNA even in the presence of lactose, effectively repressing the lac operon permanently.
A super-repressor mutant is characterized by the inability of the repressor to bind to the inducer (lactose). This leads to the repressor remaining bound to the operator region of the DNA, resulting in permanent repression of the lac operon and the inability of the cell to effectively regulate the expression of genes involved in lactose metabolism.
To know more about Repressor, visit
https://brainly.com/question/31033185
#SPJ11
You have a 100 gram sample of each of the following metals. Which sample has the largest volume?
*the sample with the lowest density would have the greatest volume
1) aluminum, d= 2.7 g/cm^3
2) gold, d = 19.3 g/cm^3
3) iron, d = 7.86 g/cm^3
4) magnesium, d = 1.74 g/cm^3
5) silver, d = 10.5 g/cm^3
To determine which metal sample has the largest volume among the given options, we need to compare their densities. The sample with the lowest density will have the greatest volume for a given mass.
Let's calculate the volumes of the metal samples using the formula:
Volume = Mass / Density
1) For aluminum: Mass = 100 g, Density = 2.7 g/cm^3
Volume of aluminum = 100 g / 2.7 g/cm^3 = 37.04 cm^3
2) For gold: Mass = 100 g, Density = 19.3 g/cm^3
Volume of gold = 100 g / 19.3 g/cm^3 = 5.18 cm^3
3) For iron: Mass = 100 g, Density = 7.86 g/cm^3
Volume of iron = 100 g / 7.86 g/cm^3 = 12.72 cm^3
4) For magnesium: Mass = 100 g, Density = 1.74 g/cm^3
Volume of magnesium = 100 g / 1.74 g/cm^3 = 57.47 cm^3
5) For silver: Mass = 100 g, Density = 10.5 g/cm^3
Volume of silver = 100 g / 10.5 g/cm^3 = 9.52 cm^3
Learn more about densities here: brainly.com/question/17596236
#SPJ11
What word describes when water is attracted to other substances?
a. cohesion
b. adhesion
c. capillary action
d. surface tension
The word that describes when water is attracted to other substances is b. adhesion.
what mass of al is required to completely react with 30.0 g mno2 ?what mass of is required to completely react with 30.0 ?12.4 g al 7.76 g al 5.82 g al 10.3 g al
10.3 g of Al is required to completely react with 30.0 g of MnO₂. The correct answer is option D.
Manganese dioxide reacts with aluminum to produce manganese and aluminum oxide. Here's the balanced chemical equation: 3MnO₂ + 4Al → 3Mn + 2Al₂O₃. Now, let's calculate the mass of Al required to react completely with 30.0 g of MnO₂: From the balanced equation, we can see that 3 moles of MnO₂ react with 4 moles of Al.
The molar mass of MnO₂ is 86.94 g/mol. 30.0 g of MnO₂ is equal to:30.0 g / 86.94 g/mol = 0.3444 mol MnO₂. According to the balanced equation, 0.3444 mol of MnO₂ requires: 4/3 × 0.3444 mol = 0.4592 mol of Al. The molar mass of Al is 26.98 g/mol. 0.4592 mol of Al is equal to: 0.4592 mol × 26.98 g/mol = 12.4 g of Al. Therefore, 12.4 g of Al is required to completely react with 30.0 g of MnO₂. Hence, option D is the correct answer.
Learn more about moles here:
https://brainly.com/question/28239680
#SPJ11
rhenium (re) consists of two stable isotopes, 185 re and 187 re. the average atomic mass of re is 186.2amu. what is the mole percent of 185 re in rhenium? (a) 40% (b) 50% (c) 60% (d) 62%
Rhenium (Re) has two stable isotopes, 185Re and 187Re. The average atomic mass of Rhenium is 186.2 amu.
The mole percent of 185Re in Rhenium can be calculated as follows:
Mole percent of 185Re = (number of moles of 185Re/total number of moles of Rhenium) × 100
To find the number of moles of 185Re, we need to know the fractional abundance of 185Re, which can be calculated as follows:
Fractional abundance of 185Re = mass percent of 185Re/atomic mass of Rhenium
Fractional abundance of 185Re = (185/186.2) × 100 = 99.35%
The mass percent of 185Re is 185 because it is the mass number of the isotope that we are interested in.
Since the atomic mass of Rhenium is the weighted average of the masses of the two isotopes,
we can assume that the mass percent of 187Re is (100 - 99.35) = 0.65%.
Now we can find the number of moles of each isotope in 100 g of Rhenium.
Number of moles of 185Re = (0.9935 × 100 g)/185 g mol⁻¹ = 0.53649 mol
Number of moles of 187Re = (0.0065 × 100 g)/187 g mol⁻¹ = 0.00034 mol
Total number of moles of Rhenium = 0.53649 + 0.00034 = 0.53683 mol
Therefore, the mole percent of 185Re in Rhenium is:(0.53649/0.53683) × 100 = 99.94% ≈ 100%
So the answer is: (b) 50%.
Know more about mole percent:
https://brainly.com/question/14324406
#SPJ12
Can water stay liquid below zero degrees Celsius?
How bad of an alcoholic do you have to be to have your brain affected?
How does dissolving a salt molecule in water make its atoms ionize?
1. Can water stay liquid below zero degrees Celsius?
Yes, under certain conditions, water can remain liquid below zero degrees Celsius. This phenomenon is known as supercooling. Supercooling occurs when water is in a pure state and does not have any impurities or nucleation sites that can trigger the freezing process. When the water is supercooled, it remains a liquid despite being below its freezing point. However, any disturbance or introduction of an impurity can cause the supercooled water to rapidly freeze.
2. How bad of an alcoholic do you have to be to have your brain affected?
The effects of alcohol on the brain can vary depending on several factors, including the amount and frequency of alcohol consumption, individual tolerance, overall health, and genetic predisposition. Prolonged and excessive alcohol consumption can lead to various brain-related issues, such as:
- Cognitive impairment: Long-term heavy drinking can impair cognitive functions, including memory, attention, and problem-solving abilities.
- Wernicke-Korsakoff syndrome: This is a severe neurological disorder caused by a deficiency of thiamine (vitamin B1) often associated with alcohol abuse. It can lead to memory problems, confusion, coordination difficulties, and even permanent brain damage.
- Structural brain changes: Chronic alcohol abuse can lead to shrinkage of brain tissue, particularly in areas associated with memory and cognitive functions.
- Increased risk of mental health disorders: Alcohol abuse is associated with an increased risk of developing mental health conditions such as depression, anxiety disorders, and alcohol-induced psychosis.
It's important to note that the impact of alcohol on the brain can vary from person to person, and some individuals may be more susceptible to the negative effects of alcohol than others. It is always advisable to consume alcohol in moderation or, in some cases, avoid it altogether to maintain good brain health.
3. How does dissolving a salt molecule in water make its atoms ionize?
When a salt molecule, such as sodium chloride (NaCl), dissolves in water, its atoms or ions separate and become surrounded by water molecules. This process is known as ionization or dissociation. In the case of NaCl, the salt molecule consists of one sodium ion (Na+) and one chloride ion (Cl-).
When the salt is added to water, the positive hydrogen (H) end of the water molecule attracts the negatively charged chloride ion (Cl-), and the negative oxygen (O) end of the water molecule attracts the positively charged sodium ion (Na+). This attraction between the water molecules and the ions causes the salt molecule to break apart or ionize.
The resulting ions, Na+ and Cl-, become surrounded by water molecules, with the water's positive ends surrounding the chloride ions and the water's negative ends surrounding the sodium ions. This process is known as hydration or solvation, and it helps to stabilize the ions in the water solution.
So, in summary, dissolving a salt molecule in water allows its atoms to ionize as the water molecules surround and stabilize the separated positive and negative ions.
[tex]\huge{\mathfrak{\colorbox{black}{\textcolor{lime}{I\:hope\:this\:helps\:!\:\:}}}}[/tex]
♥️ [tex]\large{\textcolor{red}{\underline{\mathcal{SUMIT\:\:ROY\:\:(:\:\:}}}}[/tex]
Explanation:
1.
If you apply enough pressure (making it hard for the water molecules to spread out into the solid structure), you can have liquid water several degrees below zero degrees Celsius.
2.
Alcohol interferes with the brain's communication pathways and can affect the way the brain looks and works. Alcohol makes it harder for the brain areas controlling balance, memory, speech, and judgment to do their jobs, resulting in a higher likelihood of injuries and other negative outcomes.
3.
Water molecules pull the sodium and chloride ions apart, breaking the ionic bond that held them together. After the salt compounds are pulled apart, the sodium and chloride atoms are surrounded by water molecules. Once this happens, the salt is dissolved, resulting in a homogeneous solution.
Determine the Kelvin temperature required for 0.0470 mol of gas to fill a balloon to 1.20 L under .998 atm pressure.
The Kelvin temperature required for 0.0470 mol of gas to fill a balloon to 1.20 L under 0.998 atm pressure is approximately 25.45 K.
To determine the Kelvin temperature required, we can use the ideal gas law equation, which is given by:
PV = nRT
Where:
P = pressure (in atm)
V = volume (in liters)
n = number of moles
R = ideal gas constant (0.0821 L·atm/(mol·K))
T = temperature (in Kelvin)
Rearranging the equation to solve for T, we have:
T = PV / (nR)
Given:
P = 0.998 atm
V = 1.20 L
n = 0.0470 mol
R = 0.0821 L·atm/(mol·K)
Plugging in the values into the equation, we get:
T = (0.998 atm * 1.20 L) / (0.0470 mol * 0.0821 L·atm/(mol·K))
T = 25.45 K
Therefore, the Kelvin temperature required for 0.0470 mol of gas to fill a balloon to 1.20 L under 0.998 atm pressure is approximately 25.45 K.
for more questions on temperature
https://brainly.com/question/4735135
#SPJ8
an unexcited atom has its 2 most energetic electrons in 3p orbitals. all of its other electrons have less energy. what atom is it and how many electrons does it have?
An unexcited atom that has its 2 most energetic electrons in 3p orbitals and all its other electrons with less energy is silicon (Si), which has 14 electrons.
The orbitals are used to describe the behavior of the electrons in an atom. In an atom, electrons revolve around the nucleus in defined orbits known as shells. These shells are further divided into subshells or energy levels. These subshells, in turn, are divided into orbitals.
Silicon (Si) is a chemical element with atomic number 14 and symbol Si. It is a hard, brittle crystalline solid with a blue-grey metallic lustre and belongs to group 14 of the periodic table. It is a semiconductor and is widely used in electronics as it is a component of microchips and semiconductors.Silicon is used in electronics because of its semiconductor properties.
A semiconductor is a material that can conduct electricity under certain conditions. Silicon can conduct electricity, but only if it has impurities added to it. When it is added to other elements like boron or phosphorus, it can become a conductor or insulator, which makes it ideal for use in electronics.
To learn more about electrons visit;
https://brainly.com/question/12001116
#SPJ11
Consider a hydrogen atom in the 1s state. For what value of r is the potential energy u(r) equal to the total energy E? Express your answer in terms of a. This value of r is called the classical turning point, since this is where a newtonian particle would stop its motion and reverse direction.
The value of r where the potential energy u(r) is equal to the total energy E in a hydrogen atom in the 1s state is given by r = 2a, where "a" represents the Bohr radius.
In the 1s state of a hydrogen atom, the total energy E is equal to the negative of the binding energy, which is given by E = -13.6 eV. The potential energy u(r) for a hydrogen atom in the 1s state is given by u(r) = -e^2 / (4πε₀r), where e represents the elementary charge and ε₀ represents the vacuum permittivity.
To find the value of r where u(r) is equal to E, we equate the two expressions:
-u(r) = E
-e^2 / (4πε₀r) = -13.6 eV
Rearranging the equation and substituting the values of e, ε₀, and E, we have:
1 / (4πε₀r) = 13.6 eV / e^2
1 / (4πε₀r) = 13.6 / (1.6 x 10^-19)^2
Simplifying further, we find:
r = (4πε₀ / 13.6) * (1.6 x 10^-19)^2
The value of r can be expressed in terms of the Bohr radius "a," which is given by a = 4πε₀ / (13.6 eV). Therefore, we can substitute this value to obtain the final result:
r = a * (1.6 x 10^-19)^2
The classical turning point, where the potential energy u(r) is equal to the total energy E in a hydrogen atom in the 1s state, occurs at a distance of r = 2a, where "a" represents the Bohr radius. At this point, a newtonian particle would stop its motion and reverse direction.
To know more about Bohr Radius, visit
https://brainly.com/question/30080773
#SPJ11
Animal fats and vegetable oil can be converted to soaps by reaction with.
A) sodium hydroxide.
B) sodium bicarbonate.
C) sodium hypochlorite.
D) sodium phosphate.
Sodium hydroxide is the appropriate choice for converting animal fats and vegetable oils into soaps through saponification.option A.
It is true that animal fats and vegetable oils can be chemically transformed into soaps through a process called saponification. In this reaction, a potent base, often sodium hydroxide (NaOH), hydrolyzes the fats or oils. Sodium hydroxide is the proper response, therefore that is what it is.For ages, soap has been made via the saponification process. It includes the interaction of sodium hydroxide with the fatty acids found in vegetable and animal fats.
The soaps are created when the ester bonds in fats and oils are broken down by the sodium hydroxide, which also functions as a catalyst.Strong bases like sodium hydroxide create the essential alkaline conditions for saponification to take place. It produces sodium salts, commonly referred to as sodium carboxylates, when it combines with the fatty acids.
These sodium salts are efficient at removing dirt, grease, and oils from surfaces because they possess both hydrophilic (loves water) and hydrophobic (repels water) qualities.Contrarily, the saponification process does not frequently involve the use of sodium bicarbonate (B), sodium hypochlorite (C), or sodium phosphate (D). Sodium bicarbonate is a weak base and does not have sodium hydroxide's saponification abilities. Sodium hypochlorite is not appropriate for making soap because it is a disinfectant and bleach. Although sodium phosphate is frequently employed as a food additive and detergent emulsifier, it is not involved in the saponification process.
option A.
for such more questions on Sodium
https://brainly.com/question/27655686
#SPJ8
Sodium carbonate, Na2CO3, can be prepared by heating sodium hydrogen carbonate, NaHCO3.
2NaHCO3(s) ------> Na2CO3(s) + H2O(g) + CO2(g)
Estimate the temperature at which NaHCO3 decomposes to products at 1 atm. See Appendix C for data.
I dont know which data to use so i calculated DH, DS, and DG...They are 135.5, 336.8, and 31 respectively
Specific data from Appendix C is needed to accurately estimate the temperature at which NaHCO3 decomposes.
To estimate the temperature at which NaHCO3 decomposes, the data provided should be used. DH represents the enthalpy change, DS represents the entropy change, and DG represents the Gibbs free energy change.
These values are essential in determining the temperature at which a reaction becomes spontaneous. However, without the specific values from Appendix C, it is not possible to calculate the temperature accurately.
The temperature can be calculated using the Gibbs-Helmholtz equation (ΔG = ΔH - TΔS), where ΔG is the Gibbs free energy change, ΔH is the enthalpy change, T is the temperature in Kelvin, and ΔS is the entropy change. By rearranging the equation, T can be determined.
Therefore, to estimate the temperature at which NaHCO3 decomposes, the specific values from Appendix C need to be used in the calculation.
To learn more about enthalpy change click here
brainly.com/question/29556033
#SPJ11
Calculate the residence time of sodium. Use Mass m (tons) Flow rate, f (tons/year) Sodium Zach is investigating the residence time of sodium in sea water. According to Zach's data table, the residence time of sodium written in scientific notation is years.
The formula for calculating residence time is given by
Residence time = Mass / Flow rate
We know that the mass m = tons, and flow rate f = tons/year. Using the formula for calculating the residence time of sodium, we have:
Residence time of sodium = Mass / Flow rate = m / f = tons / tons/year = years
Given that the residence time of sodium in scientific notation is 2.5 x 10^8 years. This is because the residence time of sodium is a very large value and it is easier to represent it in scientific notation rather than in standard notation.
Zach is investigating the residence time of sodium in seawater. The residence time of sodium is the length of time that sodium ions stay in seawater before being removed from it. The residence time is an important factor in the understanding of the global sodium cycle. The residence time of sodium can be calculated by using the formula, Residence time = Mass / Flow rate. Here, the mass is represented in tons, and the flow rate is represented in tons/year.The residence time of sodium in seawater is a very large value. According to Zach's data table, the residence time of sodium in scientific notation is 2.5 x 10^8 years. This value is much larger than the residence time of other elements such as chlorine and potassium. The large residence time of sodium is due to the fact that it is a relatively unreactive element and is not easily removed from seawater. Sodium is removed from seawater mainly by the deposition of sodium ions on the ocean floor and the uptake of sodium by marine organisms.
The residence time of sodium in seawater is a very large value. It is calculated by using the formula,
Residence time = Mass / Flow rate. The residence time of sodium is an important factor in the understanding of the global sodium cycle. According to Zach's data table, the residence time of sodium in scientific notation is 2.5 x 10^8 years. This value is much larger than the residence time of other elements such as chlorine and potassium. The large residence time of sodium is due to the fact that it is a relatively unreactive element and is not easily removed from seawater.
To know more about residence time visit:
brainly.com/question/25501666
#SPJ11
a. Search engines are the essential software of the computer. Justify these
statements with appropriate examples.
Answer:
Search Engine: A search engine is a kind of website through which users can search the content available on the Internet. For this purpose, users enter the desired keywords into the search field. Then the search engine looks through its index for relevant web pages and displays them in the form of a list. The Internet is a huge source of information & resources and to access the resource from the Internet there are some kinds of software, this software is known as a Search Engine.
Web Browser: The web browser is an example of application software that is developed to retrieve and view information from web pages or HTML files present on web servers. The first web browser was invented by Sir Tim Berners-Lee in 1990 and the very first graphical web browser was developed in 1993 and is named the Mosaic. After that, various web browsers were developed.
what is the value for ∆soreaction for the following reaction, given the standard entropy values? 2h2s(g) so2(g) 3srhombic(s) 2h2o(g)
Given, the balanced chemical equation:
2H2S(g) + SO2(g) → 3S(rhombic) + 2H2O(g)
For which, the value of ∆So reaction is 177.4 J/mol.K.
Given, the balanced chemical equation:
2H2S(g) + SO2(g) → 3S(rhombic) + 2H2O(g)
We have to calculate the value of ∆So reaction using the standard entropy values.
∆So reaction = ΣSo products – ΣSo Reactants
The standard entropy values are:
ΔSo f(S) = 31.4 J/mol.K
ΔSo g(H2S) = 205.5 J/mol.K
ΔSo g(SO2) = 248.0 J/mol.K
ΔSo solid(rhombic) = 31.8 J/mol.K
ΔSo g(H2O) = 188.8 J/mol.K
ΔSo reaction = ΣSo products – ΣSo Reactants= [3 × ΔSo solid(rhombic) + 2 × ΔSo g(H2O)] – [2 × ΔSo g(H2S) + 1 × ΔSog(SO2)]= [3 × 31.8 + 2 × 188.8] – [2 × 205.5 + 1 × 248.0]= 177.4 J/mol.K
Therefore, the value of ∆Soreaction is 177.4 J/mol.K.
To know more about rhombic visit:
https://brainly.com/question/62039
#SPJ11
calculate the hydrogen ion concentration for solutions with the following ph values. a. 2.42
_____ x 10^_____ M
b. 11.21
_____ x 10^_____ M
c. 6.96
_____ x 10^_____ M
d. 15.00
_____ x 10^_____ M
The hydrogen ion concentrations for the given pH values are as follows:
a. [H⁺] ≈ 2.48 x 10^(-3) M
b. [H⁺] ≈ 7.79 x 10^(-12) M
c. [H⁺] ≈ 1.06 x 10^(-7) M
d. [H⁺] ≈ 1 x 10^(-15) M (approximately)
To calculate the hydrogen ion concentration (H⁺) for solutions with given pH values, we can use the equation:
[H⁺] = 10^(-pH)
where [H⁺] represents the hydrogen ion concentration and pH is the given pH value.
a. For a pH of 2.42:
[H⁺] = 10^(-2.42) ≈ 2.48 x 10^(-3) M
b. For a pH of 11.21:
[H⁺] = 10^(-11.21) ≈ 7.79 x 10^(-12) M
c. For a pH of 6.96:
[H⁺] = 10^(-6.96) ≈ 1.06 x 10^(-7) M
d. For a pH of 15.00:
It's important to note that pH values above 14 are not within the usual pH range of aqueous solutions. pH 15.00 represents an extremely basic solution. At this pH, the hydrogen ion concentration is virtually zero. However, for the sake of calculation, we can still use the formula:
[H⁺] = 10^(-15.00) ≈ 1 x 10^(-15) M (approximately)
Therefore, the hydrogen ion concentrations for the given pH values are as follows:
a. [H⁺] ≈ 2.48 x 10^(-3) M
b. [H⁺] ≈ 7.79 x 10^(-12) M
c. [H⁺] ≈ 1.06 x 10^(-7) M
d. [H⁺] ≈ 1 x 10^(-15) M (approximately)
for more questions on hydrogen
https://brainly.com/question/24433860
#SPJ8
The internal energy with a system associated with the motion of particles and that can be added to a substance is called_____.
A. Thermal energy
B. Electrostatic forces
C. Temperature
D. Kinetic energy
The correct answer is D. Kinetic energy. The internal energy of a system refers to the total energy associated with the microscopic motion and interactions of particles within the system.
It includes various forms of energy such as kinetic energy, potential energy, and the energy associated with the particles' internal structure. Among these forms of energy, the kinetic energy specifically relates to the motion of particles. Kinetic energy is the energy possessed by particles due to their motion. In the context of a substance or system, the kinetic energy of its particles contributes to the overall internal energy. The motion of particles can be in the form of translational motion (linear motion), rotational motion, or vibrational motion.
These motions contribute to the total kinetic energy and thus the internal energy of the system. Therefore, the internal energy associated with the motion of particles and that can be added to a substance is referred to as kinetic energy.
Learn more about Kinetic energy here: brainly.com/question/30207866
#SPJ11