If the current in a circuit is 3. 2 mA and the resistance of the wire used in the circuit is 250 Ω, the voltage of the fuel cell being used in the circuit is 0.8 volts.
To calculate the voltage of the fuel cell being used in a circuit, we can use Ohm's law, which states that the voltage (V) equals the current (I) multiplied by the resistance (R): V = I x R.
In this case, the current is 3.2 mA (milliamperes), and the resistance of the wire used in the circuit is 250 Ω (ohms). We first need to convert the current to amperes by dividing it by 1000: 3.2 mA ÷ 1000 = 0.0032 A.
Next, we can substitute these values into the formula to calculate the voltage: [tex]V = 0.0032 \;A \times 250 \;\Omega = 0.8 \;volts.[/tex]
Therefore, the voltage of the fuel cell being used in the circuit is 0.8 volts.
In summary, to calculate the voltage of a fuel cell being used in a circuit, we can use Ohm's law, which states that voltage equals current multiplied by resistance.
By converting the current from milliamperes to amperes and substituting the values into the formula, we can determine the voltage of the fuel cell in volts.
To know more about resistance refer here:
https://brainly.com/question/30155623#
#SPJ11
How does writing work according to Newton's 3rd Law?
Answer:
A short way to say Newton's third law is that for every action, there's an equal but opposite reaction. What this fails to mention is that the action and reaction forces are acting against different objects, so the forces do not neutralize and cause no motion.
When you write, you push the pen on the paper; the pen is pushing the paper. Meanwhile, the paper is pushing back on the pen in equal magnitude. The forces balance making the paper stay in place. The pen moves sideways, but that does not affect the paper or the contact between the two, so the pen remains on the paper an continues to write.
A weightlifter lifts a 13.0-kg barbell from the ground and moves it a distance of 1.30 meters upwards. what is the work she does on the barbell? round
your answer to a whole number. hint mass x gravity is the weight of the barbell
The work done by the weightlifter on the barbell is 166 J.
The work done on an object is given by the equation W = Fd, where W is the work done, F is the force applied, and d is the displacement of the object. In this case, the weightlifter is applying a force to lift the barbell against the force of gravity.
The weight of the barbell can be calculated as W = mg, where m is the mass of the barbell and g is the acceleration due to gravity (approximately 9.8 [tex]m/s^{2}[/tex]).
Substituting the values given, we get: W = (13.0 kg)(9.8 [tex]m/s^{2}[/tex]) = 127.4 N
To find the work done, we need to multiply the force by the distance moved, so: W = (127.4 N)(1.30 m) = 165.6 J
Therefore, the work done by the weightlifter on the barbell is 166 J (rounded to the nearest whole number).
To know more about gravity, refer here:
https://brainly.com/question/31321801#
#SPJ11
You look up and see a helicopter pass directly overhead. 3. 10s later you hear the
sound of the engine. If the air temperature is 23. 0°C, how high was the helicopter
flying?
The helicopter was flying at an approximate height of 1070.13 meters.
To determine the height at which the helicopter was flying, we can use the speed of sound and the time delay between seeing the helicopter and hearing the sound.
The speed of sound in air depends on the temperature of the air. The relationship between the speed of sound (v) and the air temperature (T) can be approximated by the equation:
v = 331.5 m/s + 0.6 m/s/°C * T
Given:
Time delay between seeing the helicopter and hearing the sound = 3.10 s
Air temperature = 23.0°C
First, let's calculate the speed of sound at the given air temperature:
v = 331.5 m/s + 0.6 m/s/°C * T
v = 331.5 m/s + 0.6 m/s/°C * 23.0°C
v ≈ 331.5 m/s + 13.8 m/s
v ≈ 345.3 m/s
Next, we can calculate the distance traveled by the sound in the time delay:
Distance = Speed × Time
Distance = 345.3 m/s × 3.10 s
Distance ≈ 1070.13 m
Since the sound traveled from the helicopter to your location, the distance is equal to the height at which the helicopter was flying.
To know more about height refer here
https://brainly.com/question/29131380#
#SPJ11
Two balloons are separated by a distance of 25. 5 cm. One balloon is charged with a charge of + 6. 25 nC = + 6. 25 x 10-9 C and the other balloon is charges with a charge of - 3. 5 nC = - 3. 5 x 10-9 C. Calculate the magnitude of Coulombic Force between them. Explain what kind of coulombic force will exist between them (attractive or repulsive)?
The magnitude of Coulombic force between the two balloons is [tex]3.17 *10^{-4} N[/tex] and it is an attractive force as the two balloons have opposite charges (+ and - charges).
The Coulombic force between the two charged balloons can be calculated using Coulomb's law:
[tex]F = k * (q1 * q2) / r^2[/tex]
where F is the force, k is the Coulomb constant [tex](9 * 10^9 N*m^2/C^2)[/tex], q1 and q2 are the charges of the two balloons, and r is the distance between them.
Substituting the given values, we get:
F =[tex]9 * 10^9 * [(+6.25 * 10^{-9}) * (-3.5 * 10^{-9})] / (0.255)^2[/tex]
F = [tex]-3.17 *10^{-4} N[/tex] (negative sign indicates an attractive force)
To know more about Coulomb's law refer here
https://brainly.com/question/506926#
#SPJ11
Consider an atom that has an electron in an excited state. The electron falls to a lower energy level. What effect does that have on the electron?
A. The electron releases energy in the form of light.
B. The electron absorbs energy in the form of light.
The electron retains its energy without any change.
D. The electron transfers its energy to other electrons.
For the next three questions: A bungee jumper of mass m stands on a platform of height h over a canyon attached to a bungee cord with un-stretched length L and spring constant k.19) Determine the energies and use energy bar charts to illustrate them at the positions a, b, and c (see the figure), as the jumper goes through from the time he starts to jump until the time he stops (at the end of the stretched bungee cord). 20) Determine the energy transfers from position a to b and b to c. 21) Write the energy conservation equation from the start of the jump to the stopping point, which will allow you to find the stretched length AL of the bungee cord. 22) Solve the equation for the stretched length (no numbers, just the variables).
A bungee jumper is a person who jumps off a platform or a tall structure while attached to a bungee cord. The un-stretched length of the bungee cord refers to its length when it is not stretched or extended. Energy transfers refer to the transfer of energy from one form to another, such as from potential energy to kinetic energy or vice versa.
19) When the bungee jumper starts to jump, he has potential energy due to his position above the ground. As he jumps, this potential energy is converted into kinetic energy, which is the energy of motion. At position a, the jumper has all potential energy and no kinetic energy. At position b, he has some potential energy and some kinetic energy. At position c, he has no potential energy and all kinetic energy. The energy bar charts would show the amount of potential and kinetic energy at each position.
20) The energy transfer from position a to b is the transfer of potential energy to kinetic energy. The energy transfer from position b to c is the transfer of kinetic energy back to potential energy as the bungee cord stretches and slows the jumper down.
21) The energy conservation equation is: Potential energy at start = Kinetic energy at stopping point + Potential energy stored in the stretched bungee cord. This equation takes into account that the potential energy is converted into kinetic energy during the jump, and then back into potential energy as the bungee cord stretches and slows the jumper down.
22) Solving for the stretched length AL of the bungee cord would involve using the equation for the potential energy of the bungee cord, which is given by: Potential energy = (1/2)k(AL-L)^2. We would need to use the energy conservation equation to find the total potential energy at the stopping point and then equate it to the potential energy of the bungee cord. We would then solve for AL, the stretched length of the bungee cord.
Learn more about potential energy here:-
https://brainly.com/question/24284560
#SPJ4
A crate (60 kg) is in an elevator traveling upward and slowing down at 6 m/s2. find the normal force exerted on the crate by the elevator. assume g
The normal force exerted on the crate by the elevator is 294 N. The normal force is the force exerted by a surface perpendicular to an object in contact with it.
In this case, the crate is in contact with the floor of the elevator. To solve the problem, we need to find the weight of the crate, which is given by its mass (60 kg) multiplied by the acceleration due to gravity (9.8 m/s2).
So the weight of the crate is 588 N. The force exerted on the crate by the elevator is the normal force.
According to Newton's second law, the sum of the forces acting on the crate is equal to its mass multiplied by its acceleration.
The crate is slowing down at 6 m/s2, so the net force on it is its weight minus the force exerted by the elevator.
Thus, the normal force is equal to the weight of the crate minus the net force acting on it, which is (60 kg)(9.8 m/s2) - (60 kg)(6 m/s2) = 294 N. Therefore, the normal force exerted on the crate by the elevator is 294 N.
To know more about Newton's second law, refer here:
https://brainly.com/question/13447525#
#SPJ11
What is the relationship between the value of the coefficient of friction and the mass of an object for the inclined plane experiment? to what extend does the result confirm this?
The coefficient of friction and mass of an object both affect its acceleration on an inclined plane, and there is a relationship between the two as seen in the net force equation.
The coefficient of friction is a measure of the amount of friction between two surfaces in contact. For an inclined plane experiment, the coefficient of friction between the surface of the plane and the object sliding down it will affect the acceleration of the object. Specifically, a higher coefficient of friction will lead to a lower acceleration.
The mass of the object also affects its acceleration on the inclined plane. A heavier object will have a greater gravitational force acting on it, which will result in a greater acceleration down the plane.
The relationship between the coefficient of friction and the mass of an object can be seen in the equation for the net force on the object:
[tex]Fnet = mgsin(\theta) - \mu\;mgcos(\theta),[/tex]
where μ is the coefficient of friction, m is the mass of the object, g is the acceleration due to gravity, and θ is the angle of the inclined plane.
To confirm this relationship, experiments can be conducted with different masses and coefficients of friction, and the resulting accelerations can be measured. The data can then be analyzed to see if there is a correlation between the mass and coefficient of friction and the resulting acceleration.
In summary, the coefficient of friction and mass of an object both affect its acceleration on an inclined plane, and there is a relationship between the two as seen in the net force equation. Experiments can be conducted to confirm this relationship.
To know more about mass refer here:
https://brainly.com/question/18064917#
#SPJ11
A mechanical system is used to pull a tarp over a grass tennis
court. On a clear, sunny day, the efficiency of the system is
55%. After a rainstorm, the efficiency is measured to be 65%.
Explain why there is a difference in the efficiencies.
The difference in efficiencies of the mechanical system can be attributed to several factors such as increase in frictional force between the tarp and the system, an increase in tarp weight owing to water absorption, and an overall increase in resistance on the grass court due to wetness.
Firstly, the frictional force between the tarp and the mechanical system may have increased due to water on the tarp, leading to a decrease in efficiency.
Secondly, the weight of the tarp may have increased due to water absorption, leading to a greater load on the mechanical system, which in turn reduces efficiency.
Thirdly, the presence of water on the grass court may have increased the overall resistance to the movement of the tarp, leading to a decrease in efficiency.
These factors combined may explain the observed difference in efficiencies between the clear, sunny day and after a rainstorm.
For more such questions on mechanical system, click on:
https://brainly.com/question/13189455
#SPJ11
A cheetah has 5 joules of kinetic energy and runs up a 5 m hill. When it gets to the top of the hill, it stops. What is the gravitational potential energy of the cheetah?
At the top of the hill, the cheetah has gravitational potential energy of about 5.02 joules. The gravitational potential energy of the cheetah at the top of the hill can be calculated using the formula E=mgh, where E is the potential energy, m is the mass of the cheetah, g is the acceleration due to gravity (which is approximately 9.8 m/s^2), and h is the height of the hill.
Since we don't have information about the mass of the cheetah, we can't use this formula directly. However, we do know that the cheetah used all of its kinetic energy to climb the hill. So, we can use the fact that the work done by the cheetah to climb the hill (which is equal to its initial kinetic energy) is equal to the change in gravitational potential energy:
W = ΔE
where W is the work done and ΔE is the change in energy.
In this case, W = 5 J (the initial kinetic energy of the cheetah), and ΔE is the change in gravitational potential energy. Since the cheetah started at ground level and climbed to a height of 5 m, the change in height (h) is 5 m.
So, we can calculate the gravitational potential energy of the cheetah as:
ΔE = mgh
5 J = m(9.8 m/s^2)(5 m)
Solving for m, we get:
m = 0.102 kg
Now that we know the mass of the cheetah, we can use the formula E=mgh to calculate the gravitational potential energy:
E = (0.102 kg)(9.8 m/s^2)(5 m)
E = 5.02 J
Therefore, the gravitational potential energy of the cheetah at the top of the hill is approximately 5.02 joules.
Know more about gravitational potential energy here:
https://brainly.com/question/3884855
#SPJ11
What is the idea of manifest destiny, and how might it apply to space exploration?
The idea of manifest destiny refers to the 19th-century belief that it was the inevitable and divinely ordained destiny of the United States to expand its territory across North America.
This concept was used to justify the westward expansion of the nation and the acquisition of new territories.
Applying the idea of manifest destiny to space exploration suggests that it might be humanity's destiny to expand our presence beyond Earth and explore the universe.
In this context, manifest destiny would involve colonizing other planets, moons, and celestial bodies, ultimately extending human influence throughout the cosmos.
In space exploration, manifest destiny could be seen as a driving force behind the desire to discover new worlds, resources, and potential habitats for humanity.
This might involve missions to Mars, the Moon, or even more distant celestial bodies.
The concept could also promote international collaboration in space exploration, as humanity's collective destiny could be at stake.
To summarize, the idea of manifest destiny is the belief that a nation or people are destined to expand and conquer new territories. In the context of space exploration,
This concept could inspire the pursuit of discovering and colonizing new celestial bodies, ultimately extending humanity's reach throughout the universe.
To know more about North America refer here
https://brainly.com/question/19339803#
#SPJ11
The figure shows a 25-cm-long metal rod pulled along two frictionless, conducting rails at a constant speed of 3. 5 m/s. The rails have negligible resistance, but the rod has a resistance of 0. 65 Ω
The magnitude of the force required to keep the rod moving at a constant speed is 0.9065 N.
First, let's find the induced electromotive force (EMF) using Faraday's law of electromagnetic induction: EMF = B * L * v, where L is the length of the rod, and v is its velocity. Converting the length to meters: L = 0.25 m.
EMF = 1.4 T * 0.25 m * 3.7 m/s = 1.295 V
Next, let's find the induced current using Ohm's law: I = EMF / R, where R is the resistance of the rod.
I = 1.295 V / 0.50 Ω = 2.59 A
The current induced in the rod is 2.59 A.
Now, let's calculate the magnitude of the force required to keep the rod moving at a constant speed. The force needed to maintain constant speed is equal to the magnetic force acting on the rod, which is given by F = I * L * B.
F = 2.59 A * 0.25 m * 1.4 T = 0.9065 N
The magnitude of the force required to keep the rod moving at a constant speed is 0.9065 N.
To know more about force, refer here:
https://brainly.com/question/12457580#
#SPJ11
Complete question:
The figure shows a 25 cm -long metal rod pulled along two frictionless, conducting rails at a constant speed of 3.7 m/s . The rails have negligible resistance, but the rod has a resistance of 0.50 Ω .
B=1.4T
What is the current induced in the rod?
What is the magnitude of the force is required to keep the rod moving at a constant speed?
20. An astronaut weighs 8.00 × 102
newtons on the
surface of Earth. What is the weight of the astronaut
6.37 × 106
meters above the surface of Earth?
At a height of 6.37 10⁶ meters above the Earth's surface, the astronaut's weight is 195.5 N.
How to determine weight of astronaut?The weight of the astronaut changes as they move away from the surface of Earth due to the decrease in the gravitational force acting on them.
Use the formula:
F = Gm₁m₂/r²
where F = gravitational force,
G = gravitational constant,
m₁ = mass of the Earth,
m₂ = mass of the astronaut, and
r = distance between the center of the Earth and the astronaut.
Since the mass of the astronaut remains the same, use the formula to find the weight of the astronaut at the given distance.
First, calculate the distance from the center of the Earth to the astronaut:
r = radius of the Earth + height above the surface
r = 6,371,000 m + 6,370,000 m = 12,741,000 m
Calculate the gravitational force acting on the astronaut:
F = Gm₁m₂/r²
F = (6.6743 × 10⁻¹¹ N m²/kg²) x (5.972 × 10²⁴ kg) x (80 kg) / (12,741,000 m)²
F = 195.5 N
Therefore, the weight of the astronaut at a height of 6.37 × 10⁶meters above the surface of Earth is 195.5 N.
Find out more on astronaut weight here: https://brainly.com/question/4080619
#SPJ1
according to the laws of thermal radiation, hotter objects emit photons with group of answer choices a lower average energy. a lower average frequency. a shorter average wavelength. a higher average speed.
This phenomenon, often referred to as blackbody radiation, is crucial to many disciplines, including astronomy, where it is used to investigate the temperature and make-up of stars.
According to the laws of thermal radiation, hotter objects emit photons with a shorter average wavelength. This is because the energy of a photon is directly proportional to its frequency, and inversely proportional to its wavelength. As the temperature of an object increases, the average energy of its emitted photons also increases.
This means that the average frequency of emitted photons is higher, which corresponds to a shorter average wavelength. This effect can be observed in everyday life, such as when a hot piece of metal glows red or even white-hot.
At these high temperatures, the emitted photons have very short wavelengths in the visible range, which gives the object its characteristic color. This phenomenon is known as blackbody radiation, and it plays an important role in many fields, including astronomy, where it is used to study the temperature and composition of stars.
This phenomenon, often referred to as blackbody radiation, is crucial to many disciplines, including astronomy, where it is used to investigate the temperature and make-up of stars.
To learn more about : phenomenon
https://brainly.com/question/24431608
#SPJ11
A diver makes 1.0 revolutions on the way from a 9.5-m-high platform to the water. assuming zero initial vertical velocity, find the diver's average angular velocity during a dive.
The average angular velocity (ω) of the diver during the dive can be found using the formula:
1. ω = Δθ / Δt
where Δθ is the change in angle (in radians) and Δt is the time interval over which the change occurred.
In this case, the diver makes one complete revolution (i.e., a change in angle of 2π radians) during the dive, and we are not given the time interval directly.
However, we can use other information to find the time it takes for the diver to complete one revolution.
The diver falls from a height of 9.5 m, which means that the time it takes for the diver to hit the water can be found using the formula:
Δy = [tex]1/2 gt^2[/tex]
where Δy is the displacement (9.5 m), g is the acceleration due to gravity and t is the time interval. Solving for t, we get:
t = √(2Δy/g)
t = √(2 x 9.5 m / 9.8 m/s^2)
t = 1.43 seconds
Therefore, the time it takes for the diver to complete one revolution is twice this time (since the diver completes one revolution on the way down and another on the way up), or:
Δt = 2t = 2 x 1.43 s
Δt = 2.86 seconds
2. we can use this value to find the average angular velocity of the diver:
ω = Δθ / Δt
ω = 2π rad / 2.86 s
ω = 2.19 rad/s (rounded to two decimal places)
Therefore, the diver's average angular velocity during the dive was 2.19 rad/s.
To know more about angular velocity refer here
https://brainly.com/question/29557272#
#SPJ11
How many grams are in 0. 02mol of Mg (25. 3g/mol)
There are 0.506 grams in 0.02 moles of Mg
To find the grams of Mg in 0.02 mol, you can use the formula:
grams = moles × molar mass
In this case, moles = 0.02 mol, and the molar mass of Mg = 25.3 g/mol. Plug in the values:
grams = 0.02 mol × 25.3 g/mol
grams = 0.506 g
So, there are 0.506 grams of Mg in 0.02 mol.
Visit https://brainly.com/question/31597231 to learn more about moles
#SPJ11
Calculate the intensity transmission coefficient TI and reflection coefficient RI for the following interfaces: muscle/kidney, air/ muscle, bone/ muscle. assuming that the ultrasound incidence beam makes angle of 30 degree
The intensity transmission coefficient TI and reflection coefficient RI for the following interfaces: muscle/kidney, air/ muscle, and bone/ muscle. assuming that the ultrasound incidence beam makes an angle of 30 degree, θ' = 9.9 degrees, TI = 0.00061, RI = 0.99939.
To calculate the intensity transmission coefficient (TI) and reflection coefficient (RI) for each interface, we need to use the following equations:
TI = (2Z1cosθ)/(Z1cosθ + Z2cosθ')
RI = (Z2cosθ - Z1cosθ')/(Z2cosθ + Z1cosθ')
where Z1 and Z2 are the acoustic impedance of the two materials at the interface, θ is the angle of incidence (which is given as 30 degrees in this case), and θ' is the angle of transmission.
We can find the acoustic impedance for each material using the equation:
Z = ρc
where ρ is the density of the material and c is the speed of sound in that material. The values for ρ and c are typically given in tables or can be looked up online.
Using these equations, we can calculate the TI and RI for each interface:
Muscle/kidney interface:
- Z1 (muscle) = 1.64 x 10^6 kg/m²s
- Z2 (kidney) = 1.48 x 10^6 kg/m²s
- θ = 30 degrees
Using the equations above, we can find:
- θ' = 19.6 degrees
- TI = 0.71
- RI = 0.29
Air/muscle interface:
- Z1 (air) = 4 x 10^2 kg/m^2s
- Z2 (muscle) = 1.64 x 10^6 kg/m^2s
- θ = 30 degrees
Using the equations above, we can find:
- θ' = 1.9 degrees
- TI = 0.99999
- RI = 0.00001
Bone/muscle interface:
- Z1 (bone) = 7.8 x 10^6 kg/m^2s
- Z2 (muscle) = 1.64 x 10^6 kg/m^2s
- θ = 30 degrees
Using the equations above, we can find:
- θ' = 9.9 degrees
- TI = 0.00061
- RI = 0.99939
Learn more about intensity transmission coefficient here:-
https://brainly.com/question/17136252
#SPJ11
A. 149 kg baseball moving at 17. 7 m/s is caught by a 57 kg catcher at rest on an ice skating rink,
wearing frictionless skates. With what speed does the catcher slide on the ice?
Do NOT put in units or it will be marked wrong! The answer's value only! Please round each
answer to 3 places.
Mava + MbVb = (Ma+b)(Va+b)
The catcher slides on the ice at a speed of 3.09 m/s after catching the baseball. Friction occurs whenever two surfaces come into contact with each other and tends to resist their relative motion.
What is Friction?
Friction is the force that opposes motion or attempted motion between two surfaces in contact with each other. It is a fundamental force of nature that arises due to the interaction between the molecules of the two surfaces in contact.
Using the principle of conservation of momentum:
Initial momentum of the baseball = final momentum of the baseball and the catcher
Therefore, m1v1 = m1v1' + m2v2'
where,
Solving for v2', we get:
v2' = (m1v1 - m1v1') / m2
Substituting the values, we get:
v2' = (149 kg x 17.7 m/s) / (57 kg) = 46.25 m/s
Since the catcher was initially at rest, his initial velocity (v2) is zero.
Therefore, his change in velocity (v2') is equal to his final velocity (v2).
Thus, v2 = 46.25 m/s.
However, since the ice is frictionless, the catcher would continue sliding on the ice at this speed indefinitely. Therefore, the final answer is:
v2 = 3.09 m/s.
Learn more about Friction from the given link
https://brainly.com/question/24338873
#SPJ4
Why are relativistic calculations particularly important for electrons
Relativistic calculations are particularly important for electrons because they move at very high speeds, which means they have a significant fraction of the speed of light.
At these speeds, the special theory of relativity developed by Einstein becomes relevant, and classical mechanics can no longer accurately describe the behavior of electrons.
Relativistic calculations take into account the effects of time dilation, length contraction, and mass-energy equivalence, which all play a role in the behavior of electrons at high speeds.
One consequence of relativistic effects on electrons is that their mass increases as they approach the speed of light, which changes their behavior in a number of ways.
For example, the increased mass means that it requires more energy to accelerate an electron to a high speed, and the increased mass also affects the electron's behavior in a magnetic field.
Relativistic calculations are therefore important in a variety of fields where electrons are important, such as particle physics, materials science, and chemistry.
To know more about electrons refer here:
https://brainly.com/question/19448078#
#SPJ11
Two charged spheres electron and proton are 10 cm apart attract each other.
The charge of the spheres are 9. 11 x 10-31 C and 1. 67 x 10-27 C. What force results
from each other? What will be the force if the separation is increased to 30 cm?
Force when The seperation is 10 cm= 1.36 x 10^-45 N and when it is 30 cm= 1.51 x 10^-46 N
To answer your question, we will use Coulomb's Law to calculate the force between the charged spheres (electron and proton). Coulomb's Law states:
F = k * (q1 * q2) / r^2
Where F is the force, k is the electrostatic constant (8.99 x 10^9 Nm^2/C^2), q1 and q2 are the charges of the spheres, and r is the distance between them.
Given the charges q1 = 9.11 x 10^-31 C (electron) and q2 = 1.67 x 10^-27 C (proton), and the initial distance r = 10 cm = 0.1 m, we can calculate the force:
F = (8.99 x 10^9 Nm^2/C^2) * (9.11 x 10^-31 C) * (1.67 x 10^-27 C) / (0.1 m)^2
F ≈ 1.35 x 10^-45 N
Now, let's calculate the force when the separation is increased to 30 cm = 0.3 m:
F_new = (8.99 x 10^9 Nm^2/C^2) * (9.11 x 10^-31 C) * (1.67 x 10^-27 C) / (0.3 m)^2
F_new ≈ 1.50 x 10^-46 N
So, the force between the charged spheres when they are 10 cm apart is approximately 1.35 x 10^-45 N, and when the separation is increased to 30 cm, the force becomes approximately 1.50 x 10^-46 N.
Visit https://brainly.com/question/19886264 to know more about chargecharge
#SPJ11
Anna mixes 200 g of hot coffee at 90 oC with 50 g of cold water at 3 oC to bring down the
temperature of the coffee. Explain what happens to the mixture using kinetic molecular model.
Mixing hot coffee with cold water results in heat transfer from the coffee to the water through conduction until they reach thermal equilibrium. This process is explained by the kinetic molecular model and the laws of thermodynamics.
When Anna mixes hot coffee with cold water, the coffee loses heat to the surroundings and the water gains heat. The kinetic molecular model explains that heat is the energy that molecules possess and is transferred when there is a temperature difference between two objects.
In this case, the coffee molecules at a higher temperature have more kinetic energy than the water molecules at a lower temperature. As the coffee and water are mixed, the faster-moving coffee molecules collide with the slower-moving water molecules, transferring some of their kinetic energy to them.
This results in the coffee losing heat and the water gaining heat, until they reach thermal equilibrium at a new temperature between the initial temperatures of the two substances.
The process of mixing coffee with cold water is an example of heat transfer through conduction. The heat flows from the hot coffee to the cold water until the two substances reach a common temperature.
This process is governed by the laws of thermodynamics, which state that heat flows from hotter objects to cooler objects until thermal equilibrium is achieved.
To know more about equilibrium refer here:
https://brainly.com/question/31315279#
#SPJ11
An astronaut weighs 8.00 × 102
newtons on the
surface of Earth. What is the weight of the astronaut
6.37 × 106
meters above the surface of Earth?
The weight of the astronaut 6.37 × 106 meters above the surface of the Earth would be 160 N.
Weight of an astronautThe weight of an object depends on its mass and the gravitational field it is in. Near the surface of the Earth, the acceleration due to gravity is approximately 9.81 m/s².
We can use the formula F = mg to calculate the weight of the astronaut at the surface of the Earth:
The gravitational field weakens as the distance from the center of the Earth increases, thus, we can use the formula for gravitational acceleration at a distance r from the center of the Earth:
g' = g (R / (R + h))²g' = 9.81 m/s² x (6.37 × 106 m / (6.37 × 106 m + 6.37 × 106 m))²g' = 1.96 m/s²Now we can calculate the weight of the astronaut at this height:
F' = mg'F' = mass x (1.96 m/s²)We don't know the mass of the astronaut, but we can use the weight at the surface of the Earth to find it:
F = mgm = F / g= 8.00 × 102 N / 9.81 m/s²
= 81.63 kg
F' = (81.63 kg) x (1.96 m/s²)
F' = 160 N
Therefore, the weight of the astronaut 6.37 × 106 meters above the surface of the Earth is approximately 160 N.
More on the weight of Astronauts can be found here: https://brainly.com/question/11244838
#SPJ1
Robert and his younger brother Jake decide to go fishing in a nearby lake. Just before they cast off, they are both sitting at the back of the boat and the bow of the boat is touching the pier. Robert notices that they have left the fishing bait on the pier and asks Jake to go get the bait. Jake has a mass of 59. 5 kg and an arm reach of 50. 0 cm, Robert has a mass of 87. 5 kg, and the boat has a mass of 83. 0 kg and is 2. 70 m long. Determine the distance the boat moves away from the pier as Jake walks to the front of th
Since the force is zero, the boat does not move. Therefore, the distance the boat moves away from the pier as Jake walks to the front of the boat is zero.
To solve this problem, we need to use the conservation of linear momentum.
The total mass of the boat and the two brothers is given by:
M = m_boat + m_brother_1 + m_brother_2
= 83.0 kg + 59.5 kg + 50.0 kg
= 192.5 kg
The total momentum of the system before Jake starts walking is given by:
P_total = m_boat * v_boat + m_brother_1 * v_brother_1 + m_brother_2 * v_brother_2
= (83.0 kg) * (v_boat) + (59.5 kg) * (0) + (50.0 kg) * (0)
= 83.0 kg * v_boat + 297.5 kg * 0
= 210.5 kg * v_boat
v_boat is the velocity of the boat, measured in the same direction as the displacement of the boat.
Since the boat is stationary initially, v_boat = 0.
Now, we can apply Newton's second law to the system. The force exerted on the boat by Jake, who is walking towards the front of the boat, is equal to the momentum of the boat relative to Jake. Since Jake is walking away from the pier, the momentum of the boat relative to Jake is negative. Therefore, we have:
F = P_relative - P_initial
= -210.5 kg * v_boat - 297.5 kg * 0
= -408.0 kg * 0
= 0 N
Learn more about force Visit: brainly.com/question/30236242
#SPJ4
one person pulls on a rope with a force of 400 n to the right. another person pulls on the opposite end with a force of 600 n to the left. what is the unbalanced net force?
The unbalanced net force acting on the rope is 200 N to the left. This means that the rope will move in the direction of the net force, which is to the left.
The unbalanced net force is the overall force acting on the object after considering all the forces acting on it.
In this case, one person is pulling on a rope with a force of 400 N to the right and the other person is pulling on the opposite end with a force of 600 N to the left.
To determine the net force, we need to subtract the force acting in the opposite direction from the force acting in the forward direction.
Since the forces are in opposite directions, we need to subtract the smaller force from the larger force:
Net force = 600 N - 400 N = 200 N to the left
To know more about net force refer here
https://brainly.com/question/29261584#
#SPJ11
ACTIVITY 1: AGREE OR DISAGREE
Write AGREE, if you think the statement is correct and DISAGREE if otherwise
1. An RPE of 10 means that the activity is very light
2. Swimming and playing basketball are vigorous activities
3. Street and hip hip dances are active recreational activities
4. Proper execution of dance steps increases the risk of injuries
5. A normal nutritional status means that weight is proportional to the height
6. Physical inactivity and unhealthy diet are risk factors for heart disease.
7. Risk walking and dancing are activities which are moderate intensity
8. One can help the community by sharing his/her knowledge and skills in dancing
9. Surfing on the internet and playing computer games greatly improve one's fitness
10. A physically active person engages in 5-10 minutes of moderately vigorous physical activity three or more
times a week
1. DISAGREE: An RPE of 10 means the activity is extremely hard.
2. AGREE: Swimming and playing basketball are vigorous activities.
3. AGREE: Street and hip-hop dances are active recreational activities.
4. DISAGREE: Proper execution of dance steps reduces the risk of injuries.
5. AGREE: A normal nutritional status means that weight is proportional to the height.
6. AGREE: Physical inactivity and unhealthy diet are risk factors for heart disease.
7. AGREE: Risk walking and dancing are activities which are of moderate intensity.
8. AGREE: One can help the community by sharing his/her knowledge and skills in dancing.
9. DISAGREE: Surfing on the internet and playing computer games do not greatly improve one's fitness.
10. DISAGREE: A physically active person engages in at least 150 minutes of moderately vigorous physical activity per week.
Visit https://brainly.com/question/1133404 to know more about activities
#SPJ11
The farthest bright galaxies that modern telescopes are capable of seeing are up to:.
The farthest bright galaxies that modern telescopes are currently capable of seeing are up to several billions of light-years away. The exact distance depends on various factors such as the sensitivity and resolution of the telescope, observational techniques, and the brightness of the galaxy itself.
Modern telescopes, such as the Hubble Space Telescope and large ground-based observatories equipped with advanced instruments, have greatly advanced our ability to observe and study distant galaxies. These telescopes can detect and capture the light from galaxies that existed when the universe was relatively young.
Through deep field observations and gravitational lensing techniques, astronomers have been able to observe galaxies that are more than 13 billion light-years away. These observations provide valuable insights into the early universe and its evolution.
It's important to note that the term "bright" is relative and can vary depending on the context and specific criteria used for brightness. Additionally, ongoing advancements in telescope technology continue to push the limits of observation, and future telescopes and space missions are expected to enable us to see even farther into the universe.
To know more about telescopes refer here
https://brainly.com/question/19349900#
#SPJ11
Hunter pushed a couch across the room. He did 800 J of work in 20 seconds.
The couch weighed 500 N. How much power did he have?
A. 40 W
B. 1. 6 W
C. 16,000 W
D. 800 W
SUBMIT
Hunter had a power of 40 watts when he pushed the couch across the room.
To solve this problem, we need to use the formula for power, which is P = W/t, where P is power measured in watts, W is work measured in joules, and t is time measured in seconds.
Given that Hunter did 800 J of work in 20 seconds, we can calculate his power as follows:
P = W/t
P = 800 J / 20 s
P = 40 W
Therefore, Hunter had a power of 40 watts when he pushed the couch across the room.
It's important to note that power is a measure of how quickly work is done. In this case, Hunter did 800 J of work in 20 seconds, which means he was doing work at a rate of 40 J/s (or 40 watts). His power would have been greater if he had done the same amount of work in less time. Conversely, his power would have been lower if he had taken longer to do the work.
Know more about Power here:
https://brainly.com/question/24001284
#SPJ11
What's the mass and weight of each of object if there were placed on mass gmars=3. 8n/kg
The mass of an object is a measure of the amount of matter in the object, while weight is the force exerted on an object due to gravity: the mass of an object will remain the same regardless of its location in the universe, while its weight will vary depending on the gravitational force at that location.
Assuming that the question is referring to the planet Mars, where the gravitational force is approximately 3.8 N/kg, we can calculate the weight of each object based on their mass. For example, if we have an object with a mass of 1 kg, its weight on Mars would be:
Weight = Mass x Gravity
Weight = 1 kg x 3.8 N/kg
Weight = 3.8 N
Therefore, the weight of a 1 kg object on Mars would be 3.8 N. Using the same formula, we can calculate the weight of other objects placed on Mars based on their respective masses.
In conclusion, if an object is placed on Mars, its weight will vary depending on the planet's gravitational force, which is approximately 3.8 N/kg. However, its mass will remain the same regardless of its location in the universe.
To know more about gravitational force, refer here:
https://brainly.com/question/14874038#
#SPJ11
An archer shot a 0. 04 kg arrow at a target. The arrow accelerated at 7,000 m/s2 to reach a speed of 60. 0 m/s as it left the bow. How much force did the arrow have? ___N
The force exerted on the 0.04 kg arrow, which accelerated at 7,000 m/s² to reach a speed of 60.0 m/s, is 280 N.
To calculate the force exerted on the arrow, we can use Newton's second law of motion, which states that the force acting on an object is equal to its mass multiplied by its acceleration (F = m*a). In this case, the mass of the arrow (m) is 0.04 kg, and its acceleration (a) is 7,000 m/s².
Step 1: Identify the mass (m) and acceleration (a) of the arrow.
m = 0.04 kg
a = 7,000 m/s²
Step 2: Apply Newton's second law of motion (F = m*a) to calculate the force (F).
F = 0.04 kg * 7,000 m/s²
Step 3: Multiply the mass and acceleration values to obtain the force.
F = 280 N
Therefore, the force exerted on the arrow is 280 Newtons.
Know more about Newton's second law of motion click here:
https://brainly.com/question/27712854
#SPJ11
The force of __________ will be greater if one object has a larger mass than the other
The force of gravity will be greater if one object has a larger mass than the other.
Gravity is the force of attraction between two objects with mass. According to Newton's law of gravitation, the force of gravity between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.
F = G * (m₁ * m₂) / d²
where:
F = force of gravity
G = gravitational constant (a universal constant)
m₁, m₂ = masses of the two objects
d = distance between the two objects
As we can see from the formula, the force of gravity is directly proportional to the masses of the two objects. Therefore, if one object has a larger mass than the other, the force of gravity between them will be greater.
To know more about force, here
https://brainly.com/question/13191643
#SPJ4