Answers
Answer:
the last two cant be answerd in science
Answer:
Science can only answer questions about the natural world that can be determined through observation and experimentation. Science cannot tell you what is good, bad, beautiful, or ugly.
Explanation:
hope this helps!!!!!
;-)
Related Questions
Has anyone done this lab yet?
Building a Macromolecule Virtual Lab
Instructions: Complete the Building a Macromolecule Virtual Lab from the lesson assessment page. Select begin and follow the instructions to complete the lab report.
Title:
Objective(s):
Construct an Explanation:
Construct an explanation using what you learned in the lesson.
How are larger macromolecules formed from atoms of smaller macromolecules?
Create Each Molecule:
Once you create each molecule in the virtual lab simulation, take a screen shot of each molecule and place it below. Be sure to label the Carbons (C), Hydrogens (H), and Oxygens (O).
Glucose
Fructose
Sucrose
Revise your Explanation:
Revise your explanation. Be sure to use evidence from the virtual lab simulation.
How are larger macromolecules formed from atoms of smaller macromolecules?
Analysis Questions:
Analysis questions need to be answered using complete sentences. Some questions may require a longer explanation in paragraph form.
How did the carbon, hydrogen and oxygen atoms in glucose and fructose combine to form sucrose? Include in your description which atoms bonded together from fructose and glucose to form sucrose and which atoms reformed to create a water molecule.
What pieces of evidence from the virtual lab could you use to support the following claim?
Claim: Atoms from sugar molecules may combine with other elements via chemical reactions to form other large carbon-based molecules.
Make an inference about what happens to the matter and energy during the formation and breakdown of a complex carbohydrate molecules? When is energy stored or released?
Answers
Answer:
See attached file
Explanation:
In the attached file I have tried my best to answer all the questions. Hope this helps.
help me please ???:)
Answers
When too much water has accumulated in the soil it surfaces and is known as what?
Answers
Answer:
Water logging is the condition, in which too much water accumulates in the soil surface. Water logging can result because of over- irrigation of the agricultural field, the increase of the ground water level and flood. Water logging exerts negative impact on the growth of plants and underground microbial and insect population as water gets accumulated in the soil above it's water retention or absorption capacity. It blocks the pores of soil, where the roots of plants, underground soil microbes and insects receives atmospheric oxygen. It may result in death of soil dependent flora and fauna species.
Explanation:
Heyy, yes, person reading this, I need help plz lol
1. How do glucose levels change when you exercise after meals versus when you don’t exercise?
2. What happens to the rate (speed) of respiration when we exercise?
3. Why would your cells need more glucose when you exercise?
Answers
Answer:
I think:
1. Exercising release reserve suger that is stored in you muscles.
2. When you exercise you start to work your body harder and you use more oxygen and produce mor carbon dioxide so for ur bpdy to cope with this to starts to increase your breathing.
3. your body need more glucose because of your body's exaggerated release of glucose-raising hormones such as adrenaline and glucagon.
Explanation:
I hope this helps.. but I could be wrong on some..
Intro:
Hello!!! Princess Sakura here ^^
Explanation:
1.) Exercising reduces blood glucose concentrations, so when you don't exercise it'll increase.
2.) When you exercise your muscles work harder and then your body will start to need more oxygen and produces more carbon dioxide.
3.) As you exercise, the insulin sensitivity increases, so your muscle cells are able to take up glucose during and after activity.
What cell would pass on to an offspring
Answers
Answer:
the answer is prokaryotes
What best describes the relationship between starch and glucose? A. Starch and glucose are reactants that combine to form proteins. B. Starch is a monomer that is used to make glucose. C. Starch is a polymer made of glucose monomers. D. Starch and glucose are reactants that combine to form nucleic acids.
Answers
Answer:
The correct option is C
Explanation:
Polymers are large molecules that are made up of single monomeric units called monomers. Examples of polymers and there corresponding monomers are
Protein (Polymer) ⇔ Amino acids (monomers)
Starch (polymer) ⇔ glucose (monomers)
polythene (polymer) ⇔ ethene (monomers)
Deoxyribonucleic acid (polymer) ⇔ nucleotide (monomers)
The glucose monomers are linked together in a starch molecule by glycosidic bonds.
Three out of 7 students at the dance were boys if 140 students attended the dance how many were girls enter number of girls here ___
Answers
Answer:
80
Explanation:
We know that 3/7 people are boys. So, we know that 7/7-3/7, or 4/7 are girls.
We can find the total number of girls by multiplying that by 140.
[tex]\frac{4}{7}[/tex]×140 is the same as [tex]\frac{4}{1}[/tex]×20. Multiply 4 by 20, and we get 80!
Select the correct answer.
Which part of the female reproductive system handles embryo growth?
A. fallopian tubes
B.
ovaries
C.
uterus
D.
vagina
Answers
Answer:
uterus
Explanation:
What is the purpose of cellular respiration?
Breathe out CO2
O Make ATP
O Breathe in O2
O Make protein
Answers
Answer:
B. Make ATP
Explanation:
"The ultimate goal of cellular respiration is take carbohydrates, disassemble them into glucose molecules, and then use this glucose to produce energy-rich ATP molecules."
which phrase best describes the difference between these two liquids
A. patterned particle arrangement versus disorganized particle arrangement
B. fixed volume versus changing volume
C. fixed shape versus changing shape
D. high surface tension versus low surface tension
Answers
Answer:
D. High surface tension versus low surface tension.
Explanation:
The metallic liquid has a rounder form rather than the brown liquid which lays flat on the surface.
The phrase that best describes the difference between these two liquids is ; ( D ) High surface tension versus low surface tension
The metallic liquid will easily form rounder drops due to its higher surface tension while the brown liquid will have to lay flat due to its lower surface tension.
Metallic liquids are liquids that have very high surface tension than other types of liquids. and readily forms round drops when spilled on a surface. An example of a metallic liquid is Mercury
Hence we can conclude that The phrase that best describes the difference between these two liquids is ; High surface tension versus low surface tension.
Learn more : https://brainly.com/question/12915567
If you wanted to test whether or not photosynthesis was occurring, what gas would you test for, carbon dioxide or oxygen?
Answers
Answer:
Carbon Dioxide
Explanation:
PLEASE HELP BRAINLIEST PLUS 20 POINTS NEEDED ASAP
Do you think that Biosphere 2 was a success or a failure? Why? Support your answer with specific information from the video and the websites.
Answers
Stage 2 of Photosynthesis. Fill in the blank. The captured light __________, hydrogen, and ___________ are used to produce _____________.
whoever answers this correctly first gets five stars + brainliest.
Answers
Answer:
Hello... Remember me Zoribelle?
Explanation:
I gave you 6 out of 5 brainliests
please help!
Identify two forces through which ocean waves cause erosion
thank you if you do help!!
Answers
Answer:
Abrasion and impact are two forces that lead to erosion by waves
plz mark brainliest !! :DD
which of the following is a physical change?
a. sodium metal explodes on contact with water.
b. iron is oxidized to iron oxide.
c. copper reacts with a strong acid.
d. aluminum metal is pounded into think sheets.
Answers
Answer:
D
Explanation:
The rest are chemical changes
Is water wet?
Pls tell me will do brainliest
Answers
Answer:
yes duh
Explanation:
What substances do each of the letters represent?
ОА Wis O2; X is H2O; Y is CO2; and Z is glucose.
B
W is H20; X is O2; Y is CO2; and Z is glucose.
OC
W is H20; X is O2; Y is glucose; and Z is CO2.
D
W is CO2; X is O2; Y is H20; and Z is glucose.
Answers
Answer:
The answer is B
Explanation:
I had this question for a test.
subject is science
Please help me with this
Answers
Answer:
1st is form a hypothesis. that's all I know. Sorry.
Explanation:
What effect do glaciers have on plant life?
Glaciers bring quantities of minerals that choke plant life as the water runs off melting ice.
Glaciers has no effect on plant life other than helping distribute necessary water.
Glaciers bring quantities of minerals beneficial to plants as the water runs off melting ice.
Glacial flooding is destructive to plant life as silt builds in rivers.
Answers
Answer:
CORRECT ANSWER IS Glaciers bring quantities of minerals beneficial to plants as the water runs off melting ice.
Explanation:
The effects that, glaciers have on plant life is glaciers bring quantities of minerals beneficial to plants as the water runs off melting ice. The correct option is c.
What are glaciers?A glacier is a sizable, enduring mass of crystalline ice, snow, rock, silt, and frequently liquid water that forms on land and slides down a slope due to gravity and its own weight. There is melting ice due to global warming.
When glaciers continued to move across Minnesota's landscape thousands of years ago, these lakes were created. When glaciers carved up holes in the earth, ice chunks dropped into them and eventually melted, creating lakes.
Therefore, the correct option is c. Glaciers bring quantities of minerals beneficial to plants as the water runs off melting ice.
To learn more about glaciers, refer to the link:
https://brainly.com/question/20756979
#SPJ2
BRAINLIEST: A satellite was in two separate crashes. In both crashes, the satellite had the same mass. Engineers want to know about the speed and direction of the satellite after the crashes. Why would the crash affect the motion of the satellite, and which crash caused a greater change in motion for the satellite?
Answers
Answer:
Crashing into the asteroid would cause the satellite to slow down, stop, or reverse direction, because it is a force in the opposite direction to the satellite's motion. Whichever crash was a stronger force would cause it to change motion more. It takes a stronger force to change the velocity of a more massive object.
Explanation:
Big change occur in the motion of the satellite when it is hit by a big and heavy object.
The crash greatly affected the motion of the satellite because the other object comes to the satellite in opposite direction which slower down the speed and sometimes also reverse the motion of the satellite.
That crash will bring great change in the motion of the satellite which is hit by a big and heavy object whereas if the object is small than it only slow down the speed of the satellite so we can conclude that the interaction with greater object will greatly affected the motion of the satellite.
Learn more: https://brainly.com/question/18688381
If the manager or worker focuses on the defect prevention to a product, in which quality does he/she performed? *
Answers
Answer:
It enhances working efficiency of the product.
Explanation:
If the worker focuses on the defect prevention to a product, it enhances the working efficiency of the product because in the product there is no defect present which is responsible for better working of the product for a long period of time. So that's why the manager or worker of the company focuses on the quality of the product instead of its quantity.
Ensuring that products made and services rendered by a firm is free of defect and glitch is shouldered by the quality control team. Hence, such manager functions in the control aspect of quality.
The quality control team to a group of employees who checkmates the production and manufacturing process in other to ensure that the required rules and guidelines needed to deliver a flawless product or required service is followed.
Therefore, employees or managers who are in charge of preventing defect in goods and service are the quality control team.
Learn more : https://brainly.com/question/12986921
Wich of the following is a function of the nucleus. A. stores DNA B. Stores sugar C. Builds protein D. Packages proteins
Answers
Answer:
it's a
Explanation:
Which types of mechanical weathering are most likely represented?
A) Frost wedging, B) root wedging, C) salt weathering, D) heat expansion
A) Salt weathering, B) root wedging, C) pressure release, D) lichen growth
A) Heat expansion, B) lichen growth, C) salt weathering, D) abrasion
O A) Abrasion, B) root wedging, C) heat expansion, D) salt weathering
Answers
Answer: Heat expansion
Explanation:
Answer:
A) Frost wedging, B) root wedging, C) salt weathering, D) heat expansion
Explanation:
you have no choice but to trust me, and say thank you later
(IT IS TRUE)
HELP PLS AND THANK YOU. ILL MARK YOU BRAINLIEST.
How does the probability of success of fertilizations change from predators? (specifically fish fertilizations and predators like turtles)
Answers
Answer:
External fertilization usually occurs in aquatic environments where both eggs and sperm are released into the water. After the sperm reaches the egg, fertilization can then take place. Most external fertilization happens during the process of spawning where one or several females release their eggs and the male(s) release sperm in the same area, at the same time. The release of the reproductive material may be triggered by water temperature or the length of daylight. Nearly all fish spawn, as do crustaceans (such as crabs and shrimp), mollusks (such as oysters), squid, and echinoderms (such as sea urchins and sea cucumbers). Pairs of fish that are not broadcast spawners may exhibit courtship behavior. This allows the female to select a particular male. The trigger for egg and sperm release (spawning) causes the egg and sperm to be placed in a small area, enhancing the possibility of fertilization.
Explanation:
peru chille Trench
State the names of the tectonic plates on each side of the Bouvet Hot Spot. 1 point
YOU MUST NAME BOTH PLATES.
South
American
Plate
Nazca
Plate
Mid-Atlantic Ridge
St. Helena
Hot Spot
Scotia
Plate
z
Bouvet
Hot Spot
Sandwich
Plate
Your answer
Answers
Answer:
South American Plate
African Plate
Antarctica Plate
Explanation:
The Bouvet Triple Junction is a geologic triple junction of three tectonic plates located on the seafloor of the South Atlantic Ocean. It is named after Bouvet Island, which lies 275 kilometers to the east. The three plates which meet here are the South American Plate, the African Plate, and the Antarctic Plate.
What cellular process is occurring in the organelle labeled A? DS
5 Points)
udents constructed a diagram to represent two related cellular processes.
ATP
ooooo
B
F. Photosynthesis
G. Cellular respiration
H. DNA replication
J. Protein synthesis
Answers
Answer:
Photosynthesis
Explanation:the chloroplast is taking in sunlight
A black coat color in Labrador retriever dogs is dominant over a yellow coat color. A black-coated male that is heterozygous for the trait is crossed with a yellow-coated female. What is the MOST likely result of the cross?
A.
All of the puppies will have black coats.
B.
All of the puppies will have yellow coats.
C.
Some of the puppies will have black coats with yellow spots.
D.
Some of the puppies will have black coats, and some will have yellow coats.
Answers
Answer:
d
Explanation:
Write the equation for photosynthesis.
Explain the purpose of photosynthesis
Answers
Answer:
6 CO2 + 6 H2O + light --> C6H12O6 + 6 O2
Explanation:
the purpose of photosynthesis is to create food for plants
Answer:
To built up food.
Explanation:
Simply put, the plant uses the energy from light together with carbon dioxide from the air to produce sugar molecules to be used as food for itself. Photosynthesis means making something from light, which is what the plant does.
Power plants were built in the Imperial Valley as a means to harness power from geothermal resources. However, the construction of these power plants has led to the loss of habitat for burrowing owls. How can engineers and scientists solve the problem of habitat loss for burrowing owls and other wildlife?
Answers
Some of the ways Engineers and scientist can solve the problem of habitat loss are :
Planting more trees for animals and birds that live on treesCreation of Bird sanctuaries around the power plantsTo compensate for the loss of habitat faced by the birds and animals that were original inhabitants of the imperial valley just like the burrowing owls, scientists and engineers can create artificial bird sanctuaries just around the power plant to encourage the burrowing owls to resettle given that it will look like a familiar habitat to them.
Planting more trees in areas with an average amount of trees will also encourage the resettlement of animals and birds that live on trees because of the abundance of trees.
Hence we can conclude that Some of the ways Engineers and scientist can solve the problem of habitat loss are : Planting more trees for animals and birds that live on trees, Creation of Bird sanctuaries around the power plants.
Learn more : https://brainly.com/question/23383657
The three stages of cellular respiration are glycolysis, pyruvate oxidation and the citric acid cycle, and oxidative phosphorylation. Oxidative phosphorylation consists of the electron transport chain and chemiosmosis. Describe how chemiosmosis couples the electron transport chain to ATP synthesis.
Answers
Chemiosmosos couples electron transport chain in the production of ATP in such a manner electrons are transfered from one molecule to another, and energy released in these electron transfers is used to form an electrochemical gradient.
In chemiosmosis, the energy stored in the gradient is used to synthesize ATP.
ChemiosmosisChemiosmosis is the movement of ions across a semipermeable membrane bound structure, down to their electrochemical gradient
Learn more about chemiosmosis:
https://brainly.com/question/9596152