Answer:
1.88 × 10²⁴ atoms
Explanation:
Step 1: Given data
Mass of sulfur: 100 g
Step 2: Calculate the moles corresponding to 100 g of sulfur
The molar mass of sulfur is 32.07 g/mol. The moles corresponding to 100 g of sulfur are:
100 g × (1 mol/32.07 g) = 3.12 mol
Step 3: Calculate the number of atoms in 3.12 moles of sulfur
We will use Avogadro's number: there are 6.02 × 10²³ atoms of sulfur in 1 mole of sulfur.
3.12 mol × (6.02 × 10²³ atoms/1 mol) = 1.88 × 10²⁴ atoms
Question
The total kinetic energy of the tiny particles that make up matter
Object A has a mass of 12g and a volume of 8cm3. object B has a mass of 20g and a volume of 8cm3 . which object has a greater density and by how much
Answer:
Object B has a density of 2.5 g/cm³ which is greater than object A by 1 g/cm³
Explanation:
Since we know that the formula for density is d=m/v, we can divide each mass by its corresponding volume to find the densities
12/8=1.5
20/8=2.5
So we know that object B has a greater density than object A by 1 g/cm³ (gram per cubic centimeter). Also the standard unit for density is kilograms per cubic meter but I used gram per cubic centimeter since they were the given units. 1cm=100m, 1000g=1km
What is the standard enthalpy of the reaction:
2 NO(g) + O2(g) → 2 NO2(g)?
Answer:
-116.2 kJ
Explanation:
Which main type of sedimentary rock forms from solutions?
chemical
clastic
organic
shale
Answer:
The answer is a.
Explanation:
I took the quiz and took notes.
If your questions were the same as mine the answers would be below
Question 1: Which process moves small rock pieces during sedimentary rock formation?
Answer: erosion
------------------------------------
Question 2: Which statement describes one role of minerals during cementation?
Answer: Minerals bind sediments together.
------------------------------------
Question 3: Which correctly lists three factors that contribute to weathering of rock?
Answer: ice, water, wind
------------------------------------
Question 4: The picture shows a sedimentary rock that was formed from crystalized minerals. This is the picture in text form - Orangish red rock with coarse texture.
Actual question number 4: Which type of sedimentary rock is shown?
Answer: chemical
------------------------------------
Question 5: Which type of sedimentary rock forms from weathered sediment?
Answer: clastic
------------------------------------
Question 6: Which statement describes deposition?
Answer: Deposition happens after weathering and erosion.
------------------------------------
Question 7: Which correctly lists three agents that loosen and carry away rock during the erosion process?
Answer: plants, animals, wind
------------------------------------
Question 8: Which processes contribute to the formation of chemical sedimentary rocks?
Answer: Minerals dissolve and crystalize.
------------------------------------
Question 9: The image shows an example of a sedimentary rock. This is the picture in text form - Brown rock containing small pieces of different materials.
Actual question: Which feature of this rock demonstrates that it is a clastic sedimentary rock?
Answer: visible rock fragments
------------------------------------
Question 10: Which process squeezes layers of sediment together?
Answer: compaction
------------------------------------------------------------------------
Pictures used in question four and question nine are in the attached pictures.
God bless! :D
QUICKKKKK ill do 200+ points next question, how would you produce 1L of a .5 M KF solution, from a stock solution of 1 M KF
Answer:
We will take the 0.5 L from the 1M stock solution of KF inorder to form 0.5 M KF of 1L.
Explanation:
Given data:
Final volume = 1L
Final molarity = 0.5 M
Initial molarity = 1 M
Initial volume = ?
Solution:
Formula:
M₁V₁ = M₂V₂
1 M × V₁ = 0.5 M ×1L
V₁ = 0.5 M ×1L /1 M
V₁ = 0.5 L
We will take the 0.5 L from the 1M stock solution of KF inorder to form 0.5 M KF of 1L.
Help plz!!!!!!!!!!!!!!!
Answer:
Albert Einstein proposed that a beam of light is not a wave propagating through space, but a collection of discrete wave packets—photons.
Explanation:
So the right answer is the first one.
3. Which of the following molecules would want except to have a nonpolar covalent bond
Answer:
polar bonds are caused by different kind of atoms, because almost every atoms have different powers to attract electrons.
the answer will be the two same atoms, F2
1. How does thermal energy move between objects?
A. It moves from objects of lower mass to objects with higher mass
B. It moves from objects of higher mass to object with lower mass
C. It moves from objects of lower temperature to objects with higher temperature
D. It moves from objects of higher temperatures to objects with lower temperature
Answer:
D
Explanation:
Answer:
D
Explanation:
So. Radiation happens when heat moves as energy waves, called infrared waves, directly from its source to something else.... When the heat waves hits the cooler thing, they make the molecules of the cooler object speed up.
How does the temperature of the core compare to the Sun?
The core is colder the surface of the Sun.
o The Sun is hotter than the core.
The core may be as hot as the surface of the Sun.
The core is hot during the day but cooler at nighttime.
Calculate the solubility of Zn(OH)2 in water at 25°C.
Answer:
The solubility of Zn(OH)₂ at 25ºC is 1.96x 10⁻⁶,
Explanation:
The solubility is the maximum amount of a solute that can be dissolved in a certain volume of liquid (usually water) at a given temperature.
First, we write the dissolution reaction of Zn(OH)₂ in water, which is:
Zn(OH)₂ (s) ⇄ Zn²⁺ + 2 OH⁻
We know that the Kps, that is, the dissolution equilibrium constant for this compound at 25ºC is 3.0x 10⁻¹⁷.
Therefore, the Kps is:
Kps= [Zn²⁺][OH⁻]² (since Zn(OH)₂ is solid, it is not accounted for).
Given the reaction, we can see that for every single Zn²⁺ ion, two OH⁻ ions are produced. Therefore, if the concentration of Zn²⁺ dissolved is x M, the concentration of OH⁻ dissolved will be 2x M.
Substituting these values in Kps, we have:
[Zn²⁺][OH⁻]² = (x)(2x)² = 3.0x 10⁻¹⁷
4x³ = 3.0x 10⁻¹⁷
x= ∛ (3.0x 10⁻¹⁷ ÷ 4)
x= 1.96x 10⁻⁶
Therefore, the molar solubility of Zn(OH)₂ at 25ºC will be 1.96x 10⁻⁶.
Which of the following statements is true during a solar eclipse?
The moon's light is blocked by the Earth.
The Sun's light is blocked by the Earth.
The Sun's light is blocked from another planet.
The Sun's light is blocked by the Moon.
Answer:
The sun's light is blocked by the moon.
Explanation:
During the eclipse, the moon rotates right in front of the sun, that's why the eclipse is so rare and only happens every four(?) years/
I Need Help Please ?
Answer:
Not sure dude goodluck
Explanation:
Subject is actually science please answer giving brainliest also!
Answer:
B. They are too small to be seen with only our eyes.
Explanation:
Why? Because if we could have the ability to see the particles that make-up an object, it may look weird. All particles (the types that make up matter) can not be seen with our eyes because they are too small.
Hope this helped!
Pls consider Brainliest-ing my answer! It would help and mean a lot! ; )
PLEASE HELP I WILL GIVE U BRAINLIEST :)
This chart shows four atoms, labeled W, X, Y, and Z. These atoms can combine with each other to form molecules.
Which combination of atoms will form a molecule, but not a compound?
A. W and X
B. X and Y
C. W and Z
D. Y and Z
Answer:
W and Z
Explanation:
Atoms of the SAME element OR two atoms of DIFFERENT elements will form a MOLECULE.
E.g. 2 atoms of hydrogen + 1 atom of oxygen => 1 molecule of water. This 1 molecule of water can also be called a compound.
Also, 2 atoms of Oxygen can combine to form 1 molecule of Oxygen. This 1 molecule of Oxygen cannot be referred to as a compound.
Atoms of DIFFERENT elements form a COMPOUND.
Therefore, compounds are molecules, but molecules are not compounds.
Thus, the combination of atoms that will form a molecule, but not a compound is:
W(oxygen) + Z(oxygen) = molecule
Answer:
W and Z
Explanation:
Can you guys help me answer question 5 on homogeneous mixture tysm
Answer:
Hope this helped :) good luck! ❤️
Explanation:
A coolant solution is a homogeneous mixture because the coolant particles are not chemically combined with the water (keep their properties) and they are evenly distributed throughout the water.
Which of the following best describes the structure of a nucleic acid?
a
Carbon ring(s)
b
Globular or fibrous
c
Single or double helix
d
Hydrocarbon(s)
In the presence of strong acids, which of the oxygen atoms on the carboxyl group is preferentially protonated and why?
a. Protonation occurs at the carbonyl oxygen because the resulting conjugate acid i stabilized by resonance.
b. Protonation occurs at the carbonyl oxygen because the resulting conjugate base is stabilized by the inductive effect.
c. Protonation occurs at the hydroxyl oxygen because the resulting conjugate acid is stabilized by resonance.
d. Protonation occurs at the hydroxyl oxygen because the resulting conjugate base is stabilized by the inductive effect.
Answer:
Protonation occurs at the carbonyl oxygen because the resulting conjugate acid is stabilized by resonance.
Explanation:
The carboxyl group is an organic and a functional group that consists of a carbon atom that's singly bonded to a hydroxyl group and double-bonded to an oxygen atom.
In the presence of strong acids, protonation occurs at the carbonyl oxygen because the resulting conjugate acid is stabilized by resonance.
Suppose a student needs to standardize a sodium thiosulfate, Na2S2O3,Na2S2O3, solution for a titration experiment. To do so, he or she will react it with a solution of iodine. The student adds a 1.00 mL1.00 mL aliquot of 0.0200 M KIO30.0200 M KIO3 solution to a flask, followed by 3 mL3 mL of distilled water, 0.2 g0.2 g of solid KI,KI, and 1 mL H2SO4.1 mL H2SO4. The student then titrates the solution with sodium thiosulfate solution in order to determine the exact concentration of Na2S2O3.Na2S2O3. The end point of the titration is reached after 0.90 mL0.90 mL of Na2S2O3Na2S2O3 is dispensed from a microburet. What is the concentration of the standard sodium thiosulfate solution?
Answer:
0.133
Explanation:
reaction between KIO3 and KI in acidic medium
IO3⁻ +5I⁻ +6h⁺ → 3I₂ + 3H₂O
I₂ reacts with thiosulphate
NaS₂O₃ → 2Na⁺ + S₂O₃²⁻
net reaction
IO⁻₃ + 6H⁺ + 6S₂O₃³⁻ → I⁻ + 3S₄O₆²⁻ + 3H₂O
mole of KIO₃
= molarity x volume
[tex]\frac{0.02mol}{L} *0.01L[/tex]
= 0.00002mol
a mole of KIO₃ has reaction with 6 mol of S₂O₃²⁻
= 2x6x10⁻⁵
= 0.00012 mol
volume = 0.90 ml
1 ml = 0.001L
0.90ML = 0.0009L
to get concentration,
molarity/volume
= 0.00012/0.0009
= 0.133m
The concentration of the standard sodium thiosulfate solution is ; 0.133
The net chemical reaction equation
IO₃⁻ + 6H⁺ + 6S₂O₃³⁻ ----> I⁻ + 3S₄O₆²⁻ + 3H₂O
First step : Determine the moles of KIO₃
number of moles = molarity * volume
= 0.02 mol / L * 0.01 L
= 0.00002 mol
From the net chemical reaction equation
one ( 1 ) mole of KIO₃ reacts with 6 moles of S₂O₃²⁻
∴ number of moles in the reaction = 6 * 0.00002 = 0.00012 mol.
Final step : Determine the concentration of sodium thiosulfate solution
Given Volume = 0.90 ml = 0.0009 L
∴ concentration of sodium thiosulfate solution
= 0.00012 / 0.0009 = 0.133
Hence we can conclude that The concentration of the standard sodium thiosulfate solution is ; 0.133
Learn more : https://brainly.com/question/15271672
What is the maximum amount of water (in grams) that can be removed from 15ml of toluene by the addition?
Complete Question
Magnesium sulfate forms a hydrate with the formula [tex]MgSO_4. 7H_20[/tex]. What is the maximum amount of water (in grams) that can be removed from 15 ml of toluene by the addition of 200 mg of anhydrous magnesium sulfate? The molar mass of [tex]MgSO_4[/tex] is 120.4 g/mol; H20 = 18 g/mol.
Answer:
The value is [tex]z = 0.2093 \ g[/tex] of [tex]H_2O[/tex]
Explanation:
From the question we are told that
The volume of toluene is [tex]V = 15 mL[/tex]
The mass of anhydrous magnesium sulfate is [tex]m = 200m g = 200 *10^{-3} \ g[/tex]
The formula of the hydrate is [tex]MgSO_4. 7H_20[/tex]
The molar mass of [tex]MgSO_4[/tex] is [tex]z =120.4 \ g/mol[/tex]
From the formula given we see that
1 mole of [tex]Mg SO_4[/tex] wil remove 7 moles of [tex]H_2O[/tex] to for the given formula
Hence
120.4 g (1 mole) will remove 7 moles (7 * 18 g = 126 g ) of [tex]H_2O[/tex] to for the given formula
Therefore 1 g of [tex]Mg SO_4[/tex] x g of [tex]H_2O[/tex]
So
[tex]x = \frac{x]126 * 1}{ 120.4 }[/tex]
=> [tex]x = 1.0465 \ g [/tex]
From our calculation we obtained that
1 g of [tex]Mg SO_4[/tex] will remove [tex]x = 1.0465 \ g [/tex] of [tex]H_2O[/tex]
Then
[tex]200 *10^{-3} \ g[/tex] of [tex]Mg SO_4[/tex] will remove z g of [tex]x = 1.0465 \ g [/tex] of [tex]H_2O[/tex]
So
[tex]z = 200 *10^{-3} * 1.0465[/tex]
=>[tex]z = 200 *10^{-3} * 1.0465[/tex]
=>[tex]z = 0.2093 \ g[/tex] of [tex]H_2O[/tex]
Which statements about mixture is FALSE?
A. The ingredients ofvthe mixture keep their physical properties
B. Mixture components can be separated
C. All mixtures are food or drink only
D. A mixture contains more than one ingredients
What is cellulose and what does it do?
Answer:
Cellulose is an organic compound with the formula , a polysaccharide consisting of a linear chain of several hundred to many thousands of β linked D-glucose units. Cellulose is an important structural component of the primary cell wall of green plants, many forms of algae and the oomycetes.
Explanation:
Answer:
Hope this helped.
Explanation:
Cellulose is a molecule, consisting of hundreds – and sometimes even thousands – of carbon, hydrogen and oxygen atoms. Cellulose is the main substance in the walls of plant cells, helping plants to remain stiff and upright. Humans cannot digest cellulose, but it is important in the diet as fibre.
Calculate the concentration of buffer components present in 210.00 mL of a buffer solution that contains 0.300 M NH4Cl and 0.300 M NH3 immediately after the addition of 1.00 mL of 6.00 M HNO3.
Answer:
[NH3] = 0.270M
[NH4Cl] = 0.327M
Explanation:
The HNO3 will react with the weak base, NH3, as follows:
HNO₃ + NH₃ → NH₄⁺ + NO₃⁻
Initial moles of each specie of the buffer:
NH3 = NH4⁺ 0.210L * (0.300mol/L) = 0.063moles
The moles added of HNO3 = Additional moles of NH4Cl and the moles substracted of NH3:
0.001L * (6mol / L) = 0.006 moles.
After the addition:
Moles NH3 = 0.063mol - 0.006mol = 0.057moles
Moles NH4Cl = 0.063mol + 0.006mol = 0.0069moles
And their concentrations are:
[NH3] = 0.057moles / 0.211L = 0.270M
[NH4Cl] = 0.069moles / 0.211L = 0.327M
Radioactive americium-241 is used in household smoke detectors and in bone mineral analysis.
Give the number of electrons, protons, and neutrons in an atom of americium-241.
Answer:
Electrons- 95
Protons- 95
Neutrons-146
Explanation:
An atoms is made up of three fundamental particles; electrons, protons and neutrons,
Americium belongs to the f block in the periodic table. It is an actinide element.
An atom of Am-241 contains 95 protons, 95 electrons and 146 neutrons.
The pair of elements with the most familiar chemical properties are
A. Mg and S
B. Ca and Br
C. Mg and Ca
D. S and Ar
Answer:
C. mg and Ca
Explanation:
These chemical elements are collectively called as the Alkaline Earth Metals. Calcium and Magnesium are two of the six elements that fall into this category. The outer electronic structure of all these elements is similar due to which they all have similarity in their chemical and physical properties. They are all shiny, though fairly soft but still harder than alkali metals. Further, these are usually white or silvery coloured elements.They react with water to form hydrogen gas and metal hydroxide and with oxygen, they form oxides.
2. (6 pts) In a reaction, 235 mL of 1.50 M HCl solution reacts completely with an excess amount of
aluminum. If the hydrogen gas is collected over water in a container with a volume of 3.60 L and at a
temperature of 25.0 °C, calculate the pressure in the container. The vapor pressure of water is 23.78
mmHg (Table 6.4, page 232).
2Al(s) + 6HCl(aq) + 3H2(g) + 2AlCl3(aq)
Answer:
[tex]P=1.23atm[/tex]
Explanation:
Hello.
In this case, since the total pressure in the container includes the pressures of both hydrogen and water:
[tex]P=P_{H_2}+P_{H_2O}[/tex]
For the reacting solution of HCl, based on the 6:3 mole ratio with hydrogen in the chemical reaction, we can next compute the yielded moles o hydrogen:
[tex]n_{H_2}=0.235L*1.50\frac{molHCl}{L}*\frac{3molH_2}{6molHCl} =0.176molH_2[/tex]
Then, by using the ideal gas equation we compute the pressure of hydrogen for the collected 3.60 L at 25.0 °C (298.15 K):
[tex]P_{H_2}=\frac{n_{H_2}RT}{V} =\frac{0.176mol*0.082\frac{atm*L}{mol*K}*298.15K}{3.60L}=1.20atm[/tex]
Finally, since the vapor pressure of water in at is 0.03129, the total pressure is then:
[tex]P=1.20atm+0.03129atm\\\\P=1.23atm[/tex]
Best regards!
The molar mass of bismuth (Bi) is 208.98 g/mol.
Calculate the mass in grams of a sample of Fli containing 7.35 x 1023 atoms.
Write your answer using three significant figures.
g Bi
Answer:
7.35 x 1023 atoms.
Explanation:
The mass in grams of a sample of Fli containing 7.35 × 10^23 atoms should be 255 grams.
Calculation of mass:Since The molar mass of bismuth (Bi) is 208.98 g/mol.
And, 1 mole Bi = 208.98 g/mol = 6.023×10^23 no of atoms
So, the mass in grams should be
= ( 208.98 g/mol ×7.35 × 10^23) ÷ (6.023×10^23)
= 255 grams.
Learn more about the mass here; https://brainly.com/question/20512522
In an experiment, Lydia added 50 grams of sugar to 200 milliliters of water. She stirred the mixture, and the sugar eventually dissolved into the water and couldn’t be seen. The volume of the solution increased, but there was no noticeable change in color, odor, or temperature. Which statement best describes what happened in Lydia’s experiment? A. A physical change took place during this experiment. B. A chemical change took place during this experiment. C. A compound was formed during this experiment. D. A heterogeneous mixture was formed during this experiment.
Answer:
A. A physical change took place during this experiment
Explanation:
A physical change is one of the changes that occurs in a reaction. It is a kind of change characterized by no change to the chemical composition of the substances involved. It involves reactions such as melting, change of state, freezing, boiling etc.
According to this question, Lydia added 50 grams of sugar to 200 milliliters of water, then, stirred the mixture, until the sugar eventually dissolved into the water and couldn’t be seen. This change involved no change in color, odor, or temperature. Hence, Lydia's experiment represents a PHYSICAL CHANGE because only DISSOLUTION occured.
In an experiment, Lydia added 50 grams of sugar to 200 milliliters of water. She stirred the mixture, and the sugar eventually dissolved into the water and couldn’t be seen. The volume of the solution increased, but there was no noticeable change in color, odor, or temperature. Which statement best describes what happened in Lydia’s experiment? A. A physical change took place during this experiment. B. A chemical change took place during this experiment. C. A compound was formed during this experiment. D. A heterogeneous mixture was
Answer:
A
Explanation:
In this reaction: Mg (s) + I₂ (s) → MgI₂ (s)
If 3.34 moles of Mg react with 3.56 moles of I₂, and 1.76 moles of MgI₂ form, what is the percent yield?
Answer:
52.7%
Explanation:
The balanced equation for the reaction is given below:
Mg (s) + I₂ (s) → MgI₂ (s)
From the balanced equation above,
1 mole of Mg reacted with 1 mole of I₂ to produce 1 mole of MgI₂.
Next, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
1 mole of Mg reacted with 1 mole of I₂.
Therefore, 3.34 moles of Mg will also react with 3.34 moles of I₂.
From the illustration made above, we can see that only 3.34 moles out of 3.56 moles of I₂ reacted completely with 3.34 moles of Mg.
Therefore, Mg is the limiting reactant and I₂ is the excess reactant.
Next, we shall determine the theoretical yield of MgI₂.
In this case, the limiting reactant will be use because it will produce the maximum yield of MgI₂ as all of it is consumed in the reaction.
The limiting reactant is Mg and the theoretical yield of MgI₂ can be obtained as follow:
From the balanced equation above,
1 mole of Mg reacted to produce 1 mole of MgI₂.
Therefore, 3.34 moles of Mg will also react to produce 3.34 moles of MgI₂.
Thus, the theoretical yield of MgI₂ is 3.34 moles.
Finally, we shall determine the percentage yield of MgI₂ as follow:
Actual yield of MgI₂ = 1.76 moles
Theoretical yield of MgI₂ = 3.34 moles.
Percentage yield of MgI₂ =.?
Percentage yield = Actual yield /Theoretical yield × 100
Percentage yield = 1.76/3.34 × 100
Percentage yield of MgI₂ = 52.7%
Why do the leaves outside change colors?
Answer:
because the amount of pigments change as thee leaves prepare to fall from the trees
Please choose the best description, or definition for Principle of Fossil Correlation
Answer:
states that rock layers with the same unique groupings of fossils are of the same geologic age.
Explanation:
The principle of fossil correlation states that the presence of similar fossils of dead organisms in rock layers indicates that the organisms under investigation must have existed around the same geologic time. This principle can be used in dating the periods when the organism being studied lived.
The geological age system follows a chronological format in tracking the age of an item under study by grouping the time periods that organisms lived into strata.