Answers
Answer:
Explanation:
S2Si
O2
C2H4
N2
CBr4
S2
I think these are correct
Related Questions
Scientists are trying to understand the composition of substances on
different planets. Which best describes how scientists are probably working
on this problem?
A. Scientists share information with other scientists who approach
the problem in the same way so that they get support for their
observations.
B. Scientists with different perspectives approach the problem in
various ways, but they all make observations and look for
patterns.
O C. Scientists with the same perspectives use similar experiments so
that they can compare results and draw the same conclusions.
D. Scientists study the problem in the same way because they have
similar backgrounds and share information with each other.
Answers
Which element is similar to the properties bromine?
Answers
Answer: Fluorine
Explanation: It belongs in the same group as Bromine
Convert 467.00 g AlCl3 to mol AlCl3.
Answers
Answer:
467.000g AICI3 to mol AICI3
Explanation
Answer:
7.49959 mol i hope this is right
What two variables are needed to calculate molarity?
A.Grams of solution, liters of solute
B.Moles of solute, liters of solution
C.Liters of solute, grams of solution
D.Liters of solute, moles of solution
Answers
please answer's these scientist answer's
A scientist observes that the leg bones of cats are similar to the bones in the wings of bats. The scientist concludes the two species share a common ancestor. Which describes why the scientist drew that conclusion?
1. developmental patterns
2. DNA
3. fossil evidence
4 .structural data
Bald eagles might lay up to five eggs at a time, but only one hatchling usually survives. Which feature of natural selection is this an example of?
1 .adaptation
2. genetic variation
3. overproduction
4. selection
Answers
2. Genetic Variation
Hope this helps.
If I place a pot of water over a fire (heat source), what will happen to the water?
None of the water will get warm.
All of the water will get warm.
Only the water on top will get warm.
Only the water closest to the source will get warm
Answers
Answer:
C. All of the water will get warm.
Explanation:
The water will get warm all together but slowly, eventually when it hits a certain high heated temperature it will start to boil.
Which is an example of technology leading to a new discovery?
A. A truck is used to ship goods between two states.
B. A telescope shows that there is a planet past Neptune
C. An irrigation system is installed at a farm.
D. An antibiotic is used to treat an infection.
Answers
Answer:
I think the answer would be B, because there is still stuff past the known exception of out private solar system. (and all the other options don't discover anything.)
A box of pills claims that they will make your cold go away sooner. Who
would be the most impartial source for information on this claim?
A. The company that makes the medicine
B. The store that sells the medicine
C. A company that makes a competing medicine
.
D. A university study that tests medicine
Answers
Answer:D
Explanation:
need help on assignment email me at shahlaalgow g mail . com
Answers
Explanation:
sure I will email you but it says that the email you have put is not correcthave a good day ☺️
Click on an olive tree and read about it. Based on what you read, do you think the climate of Barcelona is very wet or rather dry? Explain.
Answers
Answer:
In the Autumn, Spring, and Winter, It is wet. In the Summer it is dry.
Explanation:
22.4 L is the volume of any gas regardless of atmospheric conditions.
O True
O False
Answers
Pleaseee helpp ASAP!!
How do temperature and pressure affect the volume of a gas?
Answers
The volume of a gas rises as its temperature is raised
Answer:
At constant pressure on increasing the temp volume also increases
and on increasing the pressure volume of given substance decreases !
CsBr formula name???
Answers
Answer
PubChem CID/molecular formula
Explanation:
Cesium bromide
PubChem CID 24592
Molecular Formula CsBr or BrCs
Synonyms CESIUM BROMIDE 7787-69-1 Caesium bromide Cesiumbromide Cesium bromide (CsBr) More...
Molecular Weight 212.81 g/mol
Component Compounds CID 260 (Hydrogen bromide) CID 5354618 (Cesium)
have a good day /night
may i please have a branllist
Write the chemical symbols for three different atomic cations that all have 14 protons.
Answers
Explanation:
The symbols for three different cations with 14 protons are Si²⁺, Si⁴⁺, and Si³⁺. An element with 14 protons must be silicon, Si. Its electron configuration is [Ne] 3s²3p², so it could lose up to four valence electrons. The most likely cations are Si²⁺, Si⁴⁺, and Si³⁺ (or Si⁺)
Part A. Classify each of these soluble solutes as a strong electrolyte, a weak electrolyte, or a nonelectrolyte. Solutes Formula Nitric acid HNO3 Potassium hydroxide KOH Formic acid HCOOH Ethyl amine CH3CH2NH2 Sodium bromide NaBr Butanol C4H9OH Sucrose C12H22O11
Part B. Enter a molecular equation for the reaction that occurs between aqueous HBr and aqueous LiOH.
Answers
Answer:
1. Strong electrolytes = Nitric acid HNO3,Potassium hydroxide KOH, Sodium bromide NaBr
Weak electrolytes = Formic acid HCOOH Ethyl amine CH3CH2NH2, Butanol C4H9OH
Non-electrolyte = Sucrose C12H22O11
2. The reaction between aqueous HBr and aqueous LiOH is shown innthe equation below:
HBr + LiOH ----> NaBr + H₂O
Explanation:
Electrolytes are substances that when in molten state or in aqueous solution dissociate into ions both positively-charged and negatively-charged ions known as actions and anions, which are then able conduct electricity.
Strong electrolytes are aqueous or molten solutions of compounds which ionize completely to produce anions and actions. Ionic compounds such as organic salts, acids and bases are strong electrolytes.
Weak electrolytes only ionize partially, that is, they produce few ions. Some organic salts, acids and bases are weak elctrolytes
From the compounds given above;
Strong electrolytes = Nitric acid HNO3,Potassium hydroxide KOH, Sodium bromide NaBr
Weak electrolytes = Formic acid HCOOH Ethyl amine CH3CH2NH2, Butanol C4H9OH
Non-electrolyte = Sucrose C12H22O11
2. The reaction between aqueous HBr and aqueous LiOH is shown innthe equation below:
HBr + LiOH ----> NaBr + H₂O
True or False: Without electromagnetic energy, the world as we know it would not exist.
Answers
A piece of Li is
dropped into water
and catches fire
producing LiOH
is a Chemical or physical change
Answers
Asolutioncontains50gofsugarin250g ofwater.Calculatetheconcentrationin termsofmassbymasspercentageofthe solution.
Answers
As an FDA physiologist, you need 0.625 L of phosphoric acid acid / dihydrogen phosphate (H3PO4 (aq) / H2PO4 - (aq) ) buffer with a pH of 2.75. How do you prepare this solution from stock solutions of 1.0 M H3PO4 (formic acid) and 1.5 M NaOH
Answers
Answer:
0.4058L of 1.0M H3PO4
0.2192L of 1.5M NaOH
Explanation:
The pKa of the H3PO4 / H2PO4- buffer is 2.12
To solve this question we must use H-H equation for this system:
pH = pKa + log [H2PO4-] / [H3PO4]
2.75 = 2.12 + log [H2PO4-] / [H3PO4]
0.63 = log [H2PO4-] / [H3PO4]
4.2658 = [H2PO4-] / [H3PO4] (1)
Where [] could be taken as the moles of each reactant
As you have H3PO4 solution, the reaction with NaOH is:
H3PO4 + NaOH → H2PO4- + Na+ + H2O
As you can see, both H3PO4 and H2PO4- comes from the same 1.0M H3PO4 solution
The moles of H3PO4 are:
[H3PO4] = Moles H3PO4 - Moles NaOH
And for H2PO4-:
[H2PO4-] = Moles NaOH added
Replacing in (1):
4.2658 = [Moles NaOH] / [Moles H3PO4 - Moles NaOH]
4.2658 Moles H3PO4 - 4.2658 moles NaOH = Moles NaOH
4.2658 Moles H3PO4 = 5.2658 moles NaOH (1)
In volume:
0.625L = Moles H3PO4 / 1.0M + Moles NaOH / 1.5M
0.625 = Mol H3PO4 + 0.6667 Moles NaOH (2)
Replacing (2) in (1):
4.2658 Moles H3PO4 = 5.2658 (0.625 - Mol H3PO4 / 0.6667)
4.2658 Moles H3PO4 = 5.2658 (0.625 - Mol H3PO4) / 0.6667
4.2658 Moles H3PO4 = 5.2658*(0.9375 - 1.5 mol H3PO4)
4.2658 Moles H3PO4 = 4.9367 -7.8983 mol H3PO4
12.1641 mol H3PO4 = 4.9367
Mol H3PO4 = 0.4058moles * (1L / 1.0moles) =
0.4058L of 1.0M H3PO4
And:
0.625L - 0.4058L =
0.2192L of 1.5M NaOH
Which two changes would make this reaction product-favored? 3H2 + N2 ⇄ 2NH3 + energy  A. Decreasing the pressure  B. Increasing the temperature  C. Increasing the pressure  D. Reducing the temperature
Answers
Answer:C and D
Explanation:Just did it
Increasing the pressure and Decreasing the temperature are the two changes would make this reaction product-favored.
What is Equilibrium ?It is a state when a reaction is reversible and both forward and reverse reaction occur simultaneously at the same rate .
In the process of manufacture of Ammonia , both forward and reverse reaction are taking place
N₂(g) + 3H₂ (g) → 2NH₃ (g)
2NH₃(g) → N₂ (g) + 3H₂ (g)
when these reaction occur at same rate , the state is called equilibrium and is represented by
N₂ (g) + 3H₂(g) ⇔ 2NH₃(g) +Heat
As we can see from the equation , heat is produced in the forward reaction so if we increase the temperature the reverse reaction will be favored ,
On decreasing temperature the reaction will become product favored .
While on increasing the Pressure the manufacture of Ammonia increases.
Therefore Option C and Option D are the two changes would make this reaction product-favored.
To know more about Equilibrium
https://brainly.com/question/13463225
#SPJ2
Which of the following would make experimental results more reliable? A. choosing the data that match the hypothesis B. performing the experiment multiple times C. increasing the number of variables in the experiment D. adding the experimenter's opinion to the conclusions
Answers
I think the answer is C. (Increasing the number of variables in the experiment)
Answer:
ITS B
Explanation:
THE OTHER GUY WAS WRONG
Can somebody please help me!!!!
Answers
Answer and Explanation:
The answer is Motion.
We can see that part of the image is blurry, which shows that the fish are moving fast. Moving = motion, so that means the fish has motion.
#teamtrees #PAW (Plant And Water)
Answer:
motion
Explanation:
7. The lowest whole-number ratio of the elements in a compound is called the
O empirical formula
O binary formula
O molecular formula
O representative formula
Answers
Answer: empirical formula is the answer. ur welcome.
Explanation:
Answer:
empirical formula
Explanation:
just took test
For each of the following, predict the complete, balanced chemical equation for the reaction that occurs when they are mixed. Make sure to label the states.
1. HNO3 & NaOH
2. Sr(OH)2 & HI
.
Answers
Answer:
1. The balanced chemical reaction is:
[tex]HNO_3(aq)+NaOH(aq)\rightarrow NaNO_3(aq)+H_2O(l)[/tex]
2. The balanced chemical reaction is:
[tex]2HI(aq)+Sr(OH)_2(aq)\rightarrow SrI_2(aq)+2H_2O(l)[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reactions, it is necessary to keep in mind the cations and anions are switched around as a result of the bonds rearrangement in these neutralization reactions; therefore, we can proceed as follows:
1. The balanced chemical reaction is:
[tex]HNO_3(aq)+NaOH(aq)\rightarrow NaNO_3(aq)+H_2O(l)[/tex]
Because all atoms are in the same amount at each side of the equation and the resulting salt is soluble.
2. The balanced chemical reaction is:
[tex]2HI(aq)+Sr(OH)_2(aq)\rightarrow SrI_2(aq)+2H_2O(l)[/tex]
Because all atoms are in the same amount at each side of the equation and the resulting salt is soluble.
Best regards!
When the concentration of reactant molecules is increased
Answers
Complete question is;
When the concentrations of reactant molecules are increased, the rate of reaction increases. The best explanation for this phenomenon is that as the reactant concentration increases,
A)the average kinetic energy of molecules increases.
B)the frequency of molecular collisions increases.
C)the rate constant increases.
D)the activation energy increases.
E)the order of reaction increases.
Answer:
B) The frequency of molecular collisions increases.
Explanation:
When we increase number of reactant molecules, the effective collision between the reactant molecules will form a product which also increases. As a result, the overall rate of the reaction will also increase which means the frequency of the molecular collision will also increase as well.
Thus, the correct answer is Option B
Which of these changes would likely occur if the Earth's rotation on its axis
increased in speed? TEKS 8.7(A)
A The length of the seasons would be shorter.
B The length of the seasons would be longer.
C The length of a day would be shorter.
D The length of a day would be longer.
Answers
Answer: its c
Explanation:
A student left a sealed jar of water outside her home. Water can be a solid,
liquid, or gas. When she put it outside, the water was a solid. Twelve hours
later, the water had changed phase and was a liquid. What happened to
the water molecules?
a) Before the student left, the molecules were moving in place. After, the molecules were moving around each other.
b) Before the student left, the molecules were moving around each other. After, the
molecules were moving away from each other.
c) Before the student left, the molecules were moving around each other. After, the
molecules were moving in place.
d) Before the student left, the molecules were moving away from each other. After, the
molecules were moving around each other.
Answers
i think the answer is d) Before the student left, the molecules were moving away from each other. After, the
molecules were moving around each other.
I am sorry if the answer is wrong
Which of the following is an example of a physical property?
A- Luminol reacting with blood stains to create a faint light
B- Bleach changing the color of a Ph test strip
C- The thickness of glass shards from a crime scene
D- Heroin turning purple when it is exposed to Marquis reagent
Answers
Answer:
The answer is C
Explanation:
It just makes the most sense to me
Do alloys require a specific amount of ingredients to form?
Answers
Answer:
No, alloys are independent of the amount of it's constituents.
Alloys depend on the number of it's constituents.
Only strength of alloys depends on the specific amount of ingredients/constituents/elements.
intermolecular dehydration of alkanols will gives what?
Answers
Answer:
One way to synthesize alkenes is by dehydration of alcohols, a process in which alcohols undergo E1 or E2 mechanisms to lose water and form a double bond. The dehydration reaction of alcohols to generate alkene proceeds by heating the alcohols in the presence of a strong acid, such as sulfuric or phosphoric acid, at high tempera (sorry if this is wrong )