Answer:
Explanation:
Comment
You could calculate it out by assuming the same starting temperature for each substance. (You have to assume that the substances do start at the same temperature anyway).
That's like shooting 12 with 2 dice. It can be done, but aiming for a more common number is a better idea.
Same with this question.
You should just develop a rule. The rule will look like this
The greater the heat capacity the (higher or lower) the change in temperature.
The greater the heat capacity the lower the change in temperature
That's not your question. You want to know which substance will have the greatest temperature change given their heat capacities.
Answer
lead. It has the smallest heat capacity and therefore it's temperature change will be the greatest.
Find the relationship
[tex]\\ \rm\Rrightarrow Q=mc\Delta T[/tex]
[tex]\\ \rm\Rrightarrow 100=10c\Delta T[/tex]
[tex]\\ \rm\Rrightarrow 10=c\Delta T[/tex]
[tex]\\ \rm\Rrightarrow \dfrac{10}{c}=\Delta T[/tex]
[tex]\\ \rm\Rrightarrow \Delta T\propto \dfrac{1}{c}[/tex]
So lower the c higher ∆T
Lead has the largest change in T as it has least capacity
One principle of civil engineering is that when you design a highway you should have traffic flow in
the same direction and avoid interruptions to that flow as much as possible. Exit ramps tend to be
curved so that cars don't have to stop rather than having 90-degree angles that force stops and
starts. This is an application of which Gestalt principle?
The good continuation is an application of the Gestalt principle.
What is good continuation?
According to the Law of Good Continuation, figures with smooth edges are more likely to be perceived as continuous than those with abrupt or sharp angles.
One rule of civil engineering is that while designing a highway, traffic should move in one direction and be as free of interruptions as feasible.
Instead of having 90-degree angles that require stops and starts, exit ramps typically incorporate curves to prevent motorists from having to halt. Applying the Gestalt concept to a good continuation
Hence the good continuation is an application of the Gestalt principle.
To learn more about the good continuation refer;
https://brainly.com/question/1191526
#SPJ1
A car and a truck, starting from rest, have the same acceleration, but the truck moves twice the length of time. Compared with the car, the truck will travel
Compared with the car, the truck will travel four times as far.
The initial velocity of car and truck, u = 0
The acceleration of both the truck and car = a
The length of time for the acceleration = t
Let the time the truck accelerated be 2t
How to calculate the distance traveled by car and truck?The distance traveled by car is calculated as;
s = ut + ¹/₂at²
s₁ = 0(t) + ¹/₂at²
s₁ = ¹/₂at²
The distance traveled by truck
s = ut + ¹/₂at²
s₂ = 0(2t) + ¹/₂a (2t)²
s₂ = ¹/₂a x 4t²
s₂ = 4 (¹/₂at²)
s₂ = 4(s₁)
We can conclude that the Truck distance is four times the car distance.
Therefore, Compared with the car, the truck will travel four times as far.
Learn more about motion here;
https://brainly.com/question/17113985
#SPJ1
At a given temperature, lighter gas molecules:
A) have an average speed less than heavier gas molecules.
B) have an average speed greater than heavier gas molecules.
C) ll move more slowly than heavier gas molecules.
At a given temperature, lighter gas molecules, have an average speed greater than heavier gas molecules.
What is temperature?Temperature is the measure of degree of hotness or coldness of a body. It is also the measure of average kinetic energy of a body.
As temperature increases, the average kinetic energy of a body increases.
K.E = ¹/₂mv²
v² = 2K.E/m
v = √( 2K.E/m)
where;
m is massv is velocityK.E is kinetic energyFrom the equation above, at a constant temperature, the speed of a gas molecule will decrease with increase in the mass of the molecules and vice versa.
Thus, at a given temperature, lighter gas molecules, have an average speed greater than heavier gas molecules.
Learn more about speed of gases here: https://brainly.com/question/7965890
#SPJ1
a concave lens creates a virtual image at -47.0 cm and a magnification of +1.75. what is the focal length?
The focal length of given concave lens will be -26.85 cm
The height of an image to the height of an object is the ratio that is used to determine a lens' magnification. Additionally, it is provided in terms of object and image distance. It is equivalent to the object distance to image distance ratio.
Given concave lens creates a virtual image at -47.0 cm and a magnification of +1.75.
We have to find focal length
The focal length can be found out by following way:
Magnification = m = +1.75
m = hi/h
hi = -47 cm
1.75 = -47/h
h = -26.85 cm
So the focal length of given concave lens will be -26.85 cm
Learn more about magnification factor here:
https://brainly.com/question/6947486
#SPJ10
Answer:
26.85
Explanation: I got it right on Acellus.
Ivan exerts 20 N of force to lift a basket 2 m. He then carries the basket 5 m across a room to place it on a shelf.
Ivan does work when he
.
The amount of work he does is
The amount of the work done will be 100 J. Work done is denoted by W.
What is work done?Work done is defined as the product of applied force and the distance through which the body is displaced on which the force is applied.
Work may be zero, positive and negative.it depends on the direction of the body displaced. if the body is displaced in the same direction of the force it will be positive.
The given data in the problem is;
F is the force applied = 20 N
d is the displacement = 5.0 m
The work done is found as;
W = F × d
W = 20 N × 5
W= 100 J
Hence, the amount of work done will be 100 J.
To learn more about the work done refer to the link ;
https://brainly.com/question/3902440
#SPJ1
Answer:
lifts the basket, 40J
Explanation:
You are standing in an open field near a train track as a train goes by at a constant speed blowing its horn in all directions (except down, into the ground) at a constant frequency. You are first able to hear it when it is approaching you 1 km away. When it is a quarter of a kilometer past you, by how many decibels has the train's sound level intensity shifted?
(options: 6, 12, 58, 105, 108, or 114)
Answer:
108 is the correct answer
What can a line graph be used to do?
A. Make predictions
B. Make comparisons
C. Identify positive correlation
D. Identify negative correlation
Answer:
B
Explanation:
i's 100% paset bro.....
Please help me!!
1. For objects like insulators (plastics), they can get charged by ___.
2. For metals, where there are more loosely bound electrons, they can get charged without contact by ___.
3. For metals, they can also be charged by direct contact by ___.
Which sentence describes an object that has kinetic energy?
Answer:
Kinetic energy is referred to the energy associated with movement and or motion, thus the only object that is moving would be A boat sailing across the ocean.
Explanation:
A sinewave has a period (duration of one cycle) of 460 μs. What is the corresponding frequency of this sinewave in kHz, expressed to three significant figures (see Study Note 7.1 in the Using numbers (maths) booklet)?
If the frequency of the sinewave is now reduced by a factor of 4.25, what will be the new period value? Express your answer in ms to three significant figures.
Note: in the second part of this question, to avoid rounding errors in your calculations, use the full frequency value from the first part, not the rounded value to three significant figures.
Answer:
See below
Explanation:
Frequency = 1 / period
= 1 / 460 X 10^-6
2173.91 Hz = ~ 2.17 Khz
2.17391 kHz / 4.25 = .511 kHz <====new frequency
period = 1/frequency
= 1955 microseconds =1.96 ms
Answer:
2.17 kHz1.96 msExplanation:
You want to know the frequency in kHz of a sine wave with a period of 460 μs, and its period if the frequency is reduced by a factor of 4.25.
UnitsWhen you are interested in the frequency in kHz, it is convenient to use milliseconds (ms) to express the period. Milliseconds and kilohertz are inverse units.
The period of the given sine wave can be expressed in milliseconds as ...
460 μs = 460×(0.001 ms) = 0.460 ms
FrequencyThe frequency of the wave is 1/(0.460 ms) ≈ 2.17 kHz.
PeriodBecause period and frequency are reciprocals of each other, reducing the frequency by a factor of 4.25 increases the period by the same factor.
The new period is 4.25×0.460 ms = 1.96 ms.
<95141404393>
R S ( M ) = 2 G M c 2 , where G is the gravitational constant and c is the speed of light. It is okay if you do not follow the details of the equation; the basic point is that if you put an amount of mass M or larger in a sphere of radius smaller than RS(M)
What equation is this
The provided question's answer is "Schwarzschild radius".
The conversion factor between mass and energy is the speed of light squared.
GM/r stands for gravitational potential energy, also known as energy per unit mass.
GM/rc² then has "mass per unit mass" units. In other words, as mass/mass splits out in a dimensional analysis, "dimensionless per unit."
The derivation yields a formula for time or space coordinate ratios requiring sqrt(1 - 2GM/rc²). This number becomes 0 when r=2GM/c2, or the formula becomes infinite if in the denominator. However, there is no justification for using c² as a conversion factor there. Consider the initial expression sqrt(1 - 2GM/rc²).
Assume that m is used as the test particle's mass instead of 1. Then you have sqrt(m - 2GMm/rc² and mass units. This expression denotes that the rest energy of the test mass m you introduced into the gravitational field is "gone" at that radius.
The 2 would be absent if the gravitational field were Newtonian. However, at the event horizon, Einstein gravity is slightly stronger than Newton gravity, resulting in the factor 2 in qualitative terms.
So, the given equation is of Schwarzschild radius.
Learn more about Schwarzschild radius here:
https://brainly.com/question/12647190
#SPJ10
A piece of steel expands 10 cm when ur is heated from 20 to 50 degrees Celsius. How much would it expand if it was heated from 20 to 60 degrees Celsius
The steel would expand by 4. 8 * 10^-3 cm
How to determine the linear expansionThe change in length ΔL is proportional to length L. It is dependent on the temperature, substance, and length.
Using the formula:
ΔL= α LΔT
where ΔL is the change in length L = 10cm
ΔT is the change in temperature = 60° - 20° = 40° C
α is the coefficient of linear expansion = 1.2 x 10^-5 °C
Substitute into the formula
ΔL = [tex]1.2 * 10^-5 * 10 * 40[/tex]
ΔL = [tex]4.8 * 10 ^-3[/tex] cm
Therefore, the steel would expand by 4. 8 * 10^-3 cm
Learn more about linear expansion here:
https://brainly.com/question/14325928
#SPJ1
find the velocity and acceleration if x=t³ +2t²+4 at a time 2s
Answer:
[tex]\textsf {v = 20 m/s}[/tex]
[tex]\mathsf {a = 16 m/s^2}[/tex]
Explanation:
[tex]\textsf {To find velocity, let's differentatiate x :}[/tex] [tex]\implies \mathsf {v = \frac{dx}{dt} }[/tex]
⇒ [tex]\mathsf {v = \frac{d}{dx}(t^{3}+2t^{2}+4) }[/tex]
⇒ [tex]\mathsf {v = 3t^{2} +4t +0 }[/tex] [tex]\textsf {(By applying law of differentiation)}[/tex]
[tex]\textsf {Substitute t = 2 :}[/tex]
⇒ [tex]\mathsf {v = 3(2)^{2} + 4(2) }[/tex]
⇒ [tex]\textsf {v = 12 + 8}[/tex]
⇒ [tex]\textsf {v = 20 m/s}[/tex]
[tex]\textsf {To find acceleration, let's differentatiate v :}[/tex] [tex]\implies \mathsf {a = \frac{dv}{dt} }[/tex]
⇒ [tex]\mathsf {a = \frac{d}{dx}(3t^{2}+4t) }[/tex]
⇒ [tex]\textsf {a = 6t + 4}[/tex]
[tex]\textsf {Substitute t = 2 :}[/tex]
⇒ [tex]\textsf {a = 6(2) + 4}[/tex]
⇒ [tex]\textsf {a = 12 + 4}[/tex]
⇒ [tex]\mathsf {a = 16 m/s^2}[/tex]
What will be the temperature reading in Fahrenheit scale whe eading is 310 k?
The temperature reading in Fahrenheit scale when reading 310 K is 98.6F
What is temperature?
Temperature is the degree of hotness or coldness of the object.
Given is a temperature in Kelvin scale = 310 K
Temperature on centigrade scale = 310 -273 = 37°C
Temperature conversion from Centigrade to Fahrenheit is
C/5 = F -32/9
Plug the value, we get
37/5 = F-32/9
66.6 = F -32
F = 32+66.6 =
F = 98.6
Thus, the temperature of 310 K in Fahrenheit is 98.6F.
Learn more about temperature.
https://brainly.com/question/11464844
#SPJ1
What is matter ?
.......................
Answer:
Something which occupies space and have mass.
An athlete is running at a constant velocity with a javelin held in his right hand. The force he is applying on the javelin to carry it is 5.0 newtons. If he covers a distance of 10 meters, what work has he done on the javelin?
Answer:
50J
Explanation:
Work done=Fd
=5×10
=50J
Calculate the estimated density of each ball. Use the formula
D = m/V
where D is the density, m is the mass, and V is the volume. Record your calculations in Table A of your Student Guide.
Given that the density of water is 1.0 g/cm3, make a prediction about whether each ball will float in water. Record your prediction in Table A.
What is the estimated density of the table tennis ball? Record your answer to the nearest hundredth.
0.07
g/cm3
What is the estimated density of the golf ball? Record your answer to the nearest hundreth.
The estimated density of the golf ball is 700 kg/m³
What is density?Density is defined as Mass per unit Volume.
In displacement method,
First , we measuring the volume of water displaced by an object which tell us the volume of the object then we will use the physical balance to determine its mass.
Then calculate the density by dividing the mass by the volume.
i.e. D = m/V
Given, Density of water is 1.0 g/cm³
Using displacement method , The estimated volume of golf ball is 100 cm³ and estimated mass is 7g
Then ,
Density = 10 cm³ / 7 g= 0.07 g/ cm³ = 700 kg/m³
So the estimated density of golf ball is 700 kg/m³
For more density related question visit :
https://brainly.com/question/15164682
#SPJ1
Psychology is a combination of the Greek words psyche, which means “soul” or “mind,” and logos, which means “the study of.”
Please select the best answer from the choices provided
T
F
Greek terms psyche, which means "soul" or "mind," and logos, which means "the study of," are combined to form the english word psychology. The assertion is true.
What is Psychology?Psychology is the name given to the scientific study of the mind and behavior. Psychologists are actively interested in researching and comprehending how the mind, the brain, and behavior work.
Psychology is a combination of the Greek words psyche, which means “soul” or “mind,” and logos, which means “the study of.”The given statement is corect.
Hence the best answer from the choices provided will be true.
To learn more about the psychology refer;
https://brainly.com/question/10980588
#SPJ1
If a 100 N block is resting on a steel table with a coefficient of
static friction μs = 0.68, then what minimum force is required to
move the block?
Answer:
6800
Explanation:
100 x 0.68=6800
Answer: 68
Explanation:
Which of the following measurement is most significant?
A. 66.000cm
B. 0.00066cm
C. 6.600cm
D. 6.6cm
Option C. The measurement with the most significant number is 6.600 cm.
What is significant number?
Significant numbers are numbers that have significance or meaning and give more precise details about the value of the entire numbers.
66.000 cm ------> 2 significant numbers0.00066 cm -------> 2 significant numbers6.600 cm ----------> 4 significant numbers6.6 cm ---------------> 2 significant numbersThus, the measurement with the most significant number is 6.600 cm.
Learn more about significant numbers here: https://brainly.com/question/24491627
#SPJ1
Mark is diving to the bottom of a pool to pick up a penny. Which of the
following describes the fluid pressure on his ears as he dives?
A. The fluid pressure increases as he dives.
B. After he dives, the fluid pressure increases and then decreases as
he dives deeper.
C. The fluid pressure on his ears doesn't change as he dives.
D. The fluid pressure decreases as he dives.
Answer:
A
Explanation:
As you go deeper, the pressure increases because the water is going farther away from the air and atmosphere
which of the following statements is true about the suns energy and earth
The correct statement about the sun and the earth is that only about half of the suns energy hits the earths surface.
What is the sun?The sun is the source through which energy reaches the earth. The sun is a large star that produces energy by the process of nuclear fusion.
Hence, the correct statement about the sun and the earth is that only about half of the suns energy hits the earths surface.
Learn more about the sun:https://brainly.com/question/17376727
#SPJ1
which of the following is NOT a type of scientist?
A. Geologist
B. Meteorologist
C. Botanist
D. Cryptologist
A cryptologist is not a type of scientist. The correct answer is a cryptologist and the correct option is (D).
Experts in the study of methods for secure communication and data security through encryption and decryption are known as cryptologists.
Even though they are considered scientists in the broadest sense, they are not typically classed with the other natural scientists (geologists, meteorologists, and botanists) stated in the alternatives.
Due to its emphasis on the methods and mathematical principles used in encryption and decryption, cryptology is more intimately related to computer science and mathematics.
Therefore, The correct answer is a cryptologist and the correct option is (D).
To know more about the cryptologist:
https://brainly.com/question/24165734
#SPJ3
A radioactive contaminant gives an unfortunate lab rat a dose of 1500 rem in just 1 minute. Assuming that the half life of the radioactive isotope in the contaminant is much longer than 1 minute.What would the activity of the contaminant be if the contaminant is 1.1MeV Beta Emitter?
The activity of the contaminant will be 3.5 ×10⁻¹⁰ Bq if the contaminant is 1.1MeV Beta Emitter.
Disclaimer, here the m is taken as 0.5kg.
Given, REM = 1500
Time, t= 1 minute =60 seconds
For beta particles,
RBE (Relative Biological Effectiveness) =2.
Absorbed dose, D =REM/RBE= 1500/2 = 750rad
As 100 rad=1 J/kg,
750 rad=7.5 J/kg
So, D=7.5 J/kg
D= total energy absorbed (E)/mass (m)
7.5 J/kg=E/m
E =7.5 ×0.5 = 3.75J
Therefore, the number of beta particles absorbed is 3.75 J.
The number of beta particles absorbed,
As 1 MeV= 1.6 ×10⁻¹³J
So, converting 1.1 MeV in J, 1.1×1.6 ×10⁻¹³J=1.76×10⁻¹³J
Numbers of beta particles,
n=3.75J/1.76×10⁻¹³J
n=2.13×10⁻¹²
Hence, the number of beta particles is 2.13×10⁻¹².
Activity, A= n/t
where n is the number of beta particles and t is the time.
A= n/t=(2.13×10⁻¹²)/60
A= 3.5 ×10⁻¹⁰ Bq
So, the activity is 3.5 ×10⁻¹⁰ Bq.
Learn more about radioactivity here:
https://brainly.com/question/11117468
#SPJ10
A penny is dropped so that it reaches a terminal velocity of 13.3m/s. If the momentum is measured to be 0.0332kgm/s, what is the mass of the penny
Answer:
2.5 grams
Explanation:
p = mv
m = p/v
m = 0.0332 / 13.3
m = 0.0025kg
0.0025 x 1000 = 2.5
m = 2.5g
a person walk at first constant speed 5 m/s then back alone the straight line from B to A at a constant speed 3 m/s a) what is his average speed over the entire trip b) what is his average velocity over the entire trip
Answer:
3.75 m/s
Explanation:
Comment
Let's deal with the second question first. The average velocity is 0 because the displacement (distance between the starting point and ending point) is 0.
The first question is a little harder. You don't seem to have enough information. When that happens, you can just make things up. Now there's an interesting solution. You could do it with algebra, but it is easier to see with numbers.
Givens
d = 150 m. between A and Br1 = rate from A to B = 5 m/sr2 = rate from B to A = 3 m/stime A to B = t1time B to A = t2Formulas
t1 = d / r1
t2 = d/r2
average rate = total distance / total time
Solution
t1 = 150 m / 5 m/s = 30 seconds
t2 = 150 m / 3 m/s = 50 seconds
Total distance = 150 m + 150 m = 300 m
Total time = 30 seconds + 50 seconds = 80 seconds
Average speed = 300 m / 80 s
Answer
Average speed = 3.75 m/s
If a cup of coffee is at 90°C and a person with a body temperature of 36°C touches it, how will heat flow between
them?
O from the hand to the cup
from the cup to the hand
from the cup to the surrounding air
from the hand to surrounding air
Mark this and return
Save and Exit
ext
Submit
Answer:
if you pick it up the heat will flow to the hand until the Temperature of both evens out
A metallic spoon is placed in a hot cup of coffee. If the coffee gives away 190 calories to the spoon to cool down by 0.75°C, what is the mass of the coffee? (Assume that ccoffee = 1.0 cal/gC°.)
According to the definition of calorimetry, the mass of the coffee is 253.33 g.
Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
Sensible heat is defined as the amount of heat that a body absorbs or releases without any changes in its physical state (phase change).
so, the equation that allows to calculate heat exchanges is:
Q = c× m× ΔT
where:
Q is the heat exchanged by a body of mass m.
c is the specific heat substance.
ΔT is the temperature variation.
Mass of coffee
In this case, Given is :
Q= 190 calories
c= 1
m= ?
ΔT= 0.75 C
Replacing in the equation that allows to calculate heat exchanges is:
190 cal = 1 × m× 0.75 C
Solving:
m= 190 cal÷ (1 × 0.75 C)
m=253.33 g
Finally, the mass of the coffee is 253.33 g.
Learn more about calorimeter here
https://brainly.com/question/6568414
#SPJ10
What is the weight of a 0.145kg baseball on the moon if the gravitational acceleration on the moon is approximately 1.625 m/s2
Answer:I would say that it would be about 2/3rds as fast as the moon and i have seen a similar question but it asked different info about it. I also believe that the basketball would have a lower weight due to it being in space. I feel bad saying this but i know that i got some info off this website when working with this and i hope it helps.
Explanation:
Note- I am new to Brainly so sorry if this isn't as helpful as you expected this to be.
What does the first law of thermodynamics state about energy?
The first law states that the internal energy change of that system is given by Q − W . Since added heat increases the internal energy of a system, Q is positive when added to the system and negative when removed from the system.