a. The equilibrium constant expression for the reaction is:
K = [I2(org)] / [I-(aq)]^2
Substituting the given values:
K = (0.00077 M) / (0.0716 M)^2
K ≈ 0.0015
b. To calculate the percent error, we need to compare the non-corrected equilibrium constant (at 307.25 K) with the corrected equilibrium constant (at 298.15 K). Using the Van 't Hoff equation, we can relate the two equilibrium constants:
ln(K2/K1) = -ΔH°/R [(1/T2) - (1/T1)]
where K1 is the equilibrium constant at temperature T1, K2 is the equilibrium constant at temperature T2, ΔH° is the standard enthalpy change for the reaction, R is the gas constant, and ln denotes the natural logarithm.
Assuming that ΔH° is approximately constant over the temperature range, we can use the experimentally determined partition coefficient at 301.56 K to estimate the enthalpy change:
ln(K2/K1) = -ΔH°/R [(1/T2) - (1/T1)]
ln(0.046/0.0015) = -ΔH°/R [(1/298.15 K) - (1/301.56 K)]
ΔH° ≈ -118 kJ/mol
Using this value of ΔH°, we can calculate the corrected equilibrium constant at 298.15 K:
ln(K2/K1) = -ΔH°/R [(1/T2) - (1/T1)]
ln(K2/0.0015) = (-118000 J/mol) / (8.314 J/mol*K) [(1/298.15 K) - (1/307.25 K)]
K2 ≈ 0.00058
The percent error is:
% Error = |(K2 - K1)/K2| x 100%
% Error = |(0.00058 - 0.0015)/0.00058| x 100%
% Error ≈ 61.5%
Therefore, using the non-corrected equilibrium constant leads to an error of approximately 61.5%.
To know more about equilibrium refer here
https://brainly.com/question/30694482#
#SPJ11
A solution is 0.010 m in ba2+ and 0.020 m in ca2+
required:
a. if sodium sulfate is used to selectively precipitate one of the cations while leaving the other cation in solution, which cation will precipitate first? what minimum concentration of na2so4 will trigger the precipitation of the cation that precipitates first?
b. what is the remaining concentration of the cation that precipitates first, when the other cation begins to precipitate?
a. In a solution that is 0.010 M in Ba²⁺ and 0.020 M in Ca²⁺, when sodium sulfate (Na₂SO₄) is used to selectively precipitate one of the cations, the cation that will precipitate first is Ba²⁺. The minimum concentration of Na₂SO₄ that trigger the precipitation of the cation that precipitates first is 5.5 x 10^-9 M Na₂SO₄.
b. The remaining concentration of the cation that precipitates first, when the other cation begins to precipitate is 2.0 x 10^-2 M.
Let us discuss this in detail.
a. To determine which cation will precipitate first, we need to compare the solubility product constants (Ksp) of their respective sulfates. The Ksp for BaSO₄ is 1.1 x 10^-10 and the Ksp for CaSO₄ is 2.4 x 10^-5. Since the Ksp for CaSO₄ is much larger, it means that CaSO₄ is more soluble than BaSO₄. Therefore, Ba²⁺ will precipitate first.
To calculate the minimum concentration of Na₂SO₄ needed to trigger the precipitation of Ba²⁺, we need to use the common ion effect. This means that we need to add enough sulfate ions to the solution to exceed the solubility product constant of BaSO₄. The equation for the dissociation of Na₂SO₄ is:
Na₂SO₄(s) → 2 Na⁺(aq) + SO₄²⁻(aq)
Since we have 0.010 M Ba²⁺ in the solution, we need to add enough SO₄²⁻ ions to exceed the Ksp of BaSO₄. This can be calculated using the equation:
Ksp = [Ba²⁺][SO₄²⁻]
1.1 x 10^-10 = (0.010 M)(x)
x = 1.1 x 10^-8 M
This means that we need to add at least 1.1 x 10^-8 M SO₄²⁻ ions to trigger the precipitation of Ba²⁺. Since Na₂SO₄ dissociates to give 2 SO₄²⁻ ions for every formula unit, we need to add:
(1.1 x 10^-8 M) / 2 = 5.5 x 10^-9 M Na₂SO₄
b. Once Ba²⁺ starts to precipitate, the concentration of Ba²⁺ ions in the solution will decrease until it reaches a new equilibrium. At this point, the concentration of Ca²⁺ will still be 0.020 M. To calculate the new concentration of Ba²⁺ at this equilibrium, we need to use the equation:
Ksp = [Ba²⁺][SO₄²⁻]
1.1 x 10^-10 = (x)(5.5 x 10^-9 M)
x = 2.0 x 10^-2 M
Therefore, the remaining concentration of Ba²⁺ at equilibrium will be 2.0 x 10^-2 M.
Learn more about cations at https://brainly.com/question/14309645
#SPJ11
HELP ALMOST DONE WILL MARK BRAINLIEST!!!!!!
8.
What is true concerning the concentrations of H3O+ and OH- ions in the acidic solutions?
There are more H3O+
There are fewer H3O+
They are in equal amounts
There are more hydroxide ions
9.
What is true concerning the concentrations of H3O+ and OH- ions in the basic solutions?
There are more H3O+
There are fewer H3O+
They are in equal amounts
There are more hydronium ions
Benzene at 20°C has a viscosity of 0. 000651 Pa. S. What shear stress is required to deform this fluid at a velocity gradient of 4900 s-1 ?
To calculate the shear stress required to deform benzene at a velocity gradient of 4900 s-1, we can use the equation:
Shear stress = viscosity x velocity gradient
Plugging in the given values, we get:
Shear stress = 0.000651 Pa. S x 4900 s-1
Shear stress = 3.19 Pa
Therefore, a shear stress of 3.19 Pa is required to deform benzene at a velocity gradient of 4900 s-1.
What is Shear stress?
Shear stress is a type of stress that occurs when a force is applied parallel to a surface or along a plane within a material. It is the result of the force causing the material to deform or change shape, with one part of the material sliding or shearing over another part.
Shear stress is often described in terms of the shear force per unit area, or shear strength, that is required to cause the material to shear or deform. The unit of measurement for shear stress is typically in pascals (Pa) or pounds per square inch (psi).
To know more about Shear stress:
https://brainly.com/question/12910262
#SPJ11
Calculate the average rate of reaction for the time interval from 180s to 300s
The average rate of reaction for the time interval from 180s to 300s is 0.00083 M/s.
To calculate the average rate of reaction for a given time interval, we need to know the change in the concentration of a reactant or product over that time period. Let's assume that we have that information.
The average rate of reaction from 180s to 300s can be calculated using the following formula:
average rate = (change in concentration)/(change in time)
Let's say that the concentration of a product increased from 0.05 M to 0.15 M over the time interval from 180s to 300s. The change in concentration is:
change in concentration = final concentration - initial concentration
change in concentration = 0.15 M - 0.05 M
change in concentration = 0.10 M
The change in time is:
change in time = final time - initial time
change in time = 300 s - 180 s
change in time = 120 s
Now we can substitute these values into the formula to find the average rate of reaction:
average rate = (change in concentration)/(change in time)
average rate = (0.10 M)/(120 s)
average rate = 0.00083 M/s
Therefore, the average rate of reaction for the time interval from 180s to 300s is 0.00083 M/s.
Learn more about Average rate at
brainly.com/question/12395856
#SPJ4
A student measured out 10. 0 mL of a 8. 0M sodium sulfide stock solution. The student then diluted the stock solution adding 20. 0 mL of distilled water. What is the concentration of the diluted solution?
The concentration of the diluted solution is 2.67 M. The student diluted the stock solution by adding 20 mL of distilled water to the 10 mL of 8.0 M sodium sulfide solution.
To find the concentration of the diluted solution, we can use the equation:
M1V1 = M2V2
Where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.
Substituting the values given, we get:
M1 = 8.0 M
V1 = 10.0 mL
V2 = 10.0 mL + 20.0 mL = 30.0 mL
M2 = ?
Using the equation and solving for M2, we get:
M2 = (M1V1) / V2
M2 = (8.0 M x 10.0 mL) / 30.0 mL
M2 = 2.67 M
Therefore, the concentration of the diluted solution is 2.67 M.
To know more about the stock solution refer here :
https://brainly.com/question/25256765#
#SPJ11
A large balloon contain 1. 00 mol of helium in a volume of 22. 4 L at 0. 00 C. What pressure will the helium exert on its container?
The gas laws are a set of fundamental principles that describe the behavior of gases under different conditions of pressure, volume, and temperature. We can use the ideal gas law to solve this problem:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the temperature from Celsius to Kelvin by adding 273.15:
T = 0.00 C + 273.15 = 273.15 K
Next, we can plug in the values we have:
P(22.4 L) = (1.00 mol)(0.0821 L·atm/mol·K)(273.15 K)
Simplifying:
P = (1.00 mol)(0.0821 L·atm/mol·K)(273.15 K)/(22.4 L)
P = 1.01 atm
Therefore, the helium will exert a pressure of 1.01 atm on its container.
For more question on gas laws
https://brainly.com/question/4147359
#SPJ11
Drag and drop the words that accurately complete the chart below. Example a lion and a cheetah mistletoe on a tree a coyote eating a rabbit a remora and a shark clownfish and anemone parasitism friendship competition Type of Symbiosis mutualism 1:10 predation relationship commensalism collaboration alliance
Answer:
Lion and cheetah - Competition
Mistletoe on a tree - Parasitism
Coyote eating rabbit- Predatation
Remora and Shark - Mutualism
Clownfish and Anemone - Relationship
Explanation:
During nuclear fission and fusion, matter that seems to disappear is actually converted intoa. massb. energyc. volumed. nuclei
Answer: B. Energy
Explanation: The matter is converted into energy, which is released in the form of radiation, this is due to the fact that the mass of the products of the reaction is less than the mass of the reactants, and this difference in mass is converted into energy. Aka ([tex]E=mc^{2}[/tex]).
A device plugged into a 110-volt line produces 0. 50 amperes of current. The device is left on for 8. 0 hours. Find the cost of electricity if the power company charges 8 cents per kWh
The cost of electricity for the device left on for 8.0 hours is 3.52 cents.
To find the cost of electricity for the device, first, we need to calculate the power consumption, then the total energy consumed, and finally the cost.
1. Calculate the power consumption:
Power (P) = Voltage (V) x Current (I)
P = 110 volts x 0.50 amperes = 55 watts
2. Calculate the total energy consumed:
Energy (E) = Power (P) x Time (t)
E = 55 watts x 8.0 hours = 440 watt-hours = 0.44 kilowatt-hours (kWh)
3. Calculate the cost:
Cost = Energy (E) x Rate
Cost = 0.44 kWh x 8 cents/kWh = 3.52 cents
The cost of electricity for the device left on for 8.0 hours is 3.52 cents.
To know more about cost of electricity refer here: https://brainly.com/question/28800300#
#SPJ11
Select the most ideal gas situation:
Hydrogen and steam.
When hydrogen and steam are both present in a gas at the same pressure and temperature, this is the ideal gas condition. This is so because according to the ideal gas law, an ideal gas's pressure, volume, and temperature are all precisely proportional to one another.
This indicates that when the two gases have the same temperature and pressure, the two gases will also have the same volume. As a result, the gases are in their ideal state, having the same volume and pressure but retaining their distinct chemical compositions.
This is perfect because it enables the two gases to interact with one another in a predictable way, allowing for the measurement and prediction of the gases' behaviour.
Learn more about gases at:
https://brainly.com/question/1369730
#SPJ1
Silver reacts with hydrogen sulphide gas, and oxygen according to the reaction: 4Ag(s) + 2H2S(g) + O2(g) → 2Ag2S(s)+ 2H2O(g) How many grams of silver sulphide are formed when 1. 90 g of silver reacts with 0. 280 g of hydrogen sulphide and 0. 160 g of oxygen?
When 90 g of silver reacts with 0.280 g of hydrogen sulphide and 0.160 g of oxygen, approximately 1.018 grams of silver sulphide are formed.
To determine how many grams of silver sulphide (Ag2S) are formed when 90 g of silver (Ag) reacts with 0.280 g of hydrogen sulphide (H2S) and 0.160 g of oxygen (O2), follow these steps:
1. Calculate the moles of each reactant using their molar masses:
- Silver (Ag): 90 g / (107.87 g/mol) ≈ 0.834 moles
- Hydrogen Sulphide (H2S): 0.280 g / (34.08 g/mol) ≈ 0.00821 moles
- Oxygen (O2): 0.160 g / (32.00 g/mol) ≈ 0.00500 moles
2. Determine the limiting reactant using the stoichiometry of the balanced chemical equation:
- Ag: 0.834 moles / 4 = 0.2085
- H2S: 0.00821 moles / 2 = 0.00411
- O2: 0.00500 moles / 1 = 0.00500
The smallest value is 0.00411, which corresponds to H2S, making it the limiting reactant.
3. Calculate the moles of Ag2S produced using the stoichiometry from the balanced chemical equation:
- Moles of Ag2S = 0.00411 moles H2S × (2 moles Ag2S / 2 moles H2S) = 0.00411 moles Ag2S
4. Convert the moles of Ag2S to grams using its molar mass (247.87 g/mol):
- Grams of Ag2S = 0.00411 moles Ag2S × 247.87 g/mol = 1.018 g Ag2S
So, when 90 g of silver reacts with 0.280 g of hydrogen sulphide and 0.160 g of oxygen, approximately 1.018 grams of silver sulphide are formed.
To know more about silver sulphide refer here: https://brainly.com/question/12753006#
#SPJ11
How many grams of sodium sulfate will be formed if you start with 175. 0 grams of sodium hydroxide and you have an excess of sulfuric acid?
310.56 grams of sodium sulfate will be formed if you start with 175.0 grams of sodium hydroxide and have an excess of sulfuric acid.
To determine how many grams of sodium sulfate will be formed starting with 175.0 grams of sodium hydroxide and an excess of sulfuric acid, follow these steps:
1. Write the balanced chemical equation: 2 NaOH + H2SO4 → Na2SO4 + 2 H2O
2. Calculate the molar mass of sodium hydroxide (NaOH): (22.99 g/mol for Na) + (15.99 g/mol for O) + (1.01 g/mol for H) = 40.00 g/mol
3. Calculate the moles of sodium hydroxide (NaOH): 175.0 g / 40.00 g/mol = 4.375 moles
4. Determine the mole ratio between sodium hydroxide (NaOH) and sodium sulfate (Na2SO4): From the balanced equation, 2 moles of NaOH react to produce 1 mole of Na2SO4.
5. Calculate the moles of sodium sulfate (Na2SO4) produced: (4.375 moles NaOH) x (1 mole Na2SO4 / 2 moles NaOH) = 2.1875 moles Na2SO4
6. Calculate the molar mass of sodium sulfate (Na2SO4): (2 x 22.99 g/mol for Na) + (32.07 g/mol for S) + (4 x 16.00 g/mol for O) = 142.04 g/mol
7. Calculate the mass of sodium sulfate (Na2SO4) formed: (2.1875 moles Na2SO4) x (142.04 g/mol) = 310.56 grams
Therefore, 310.56 grams of sodium sulfate will be formed if you start with 175.0 grams of sodium hydroxide and have an excess of sulfuric acid.
To know more about sodium sulfate refer here: https://brainly.com/question/14464099#
#SPJ11
Explain use the tyndall effect to explain why it is more difficult to drive through
fog using high beams than using low beams.
The Tyndall effect is the scattering of light by colloidal particles or suspensions, causing the particles to become visible.
In fog, water droplets act as colloidal particles and scatter light, making it difficult to see clearly. High beams produce a greater amount of light, which causes more scattering and reflection in the fog, resulting in decreased visibility. This is because the water droplets in the fog are closer together and more concentrated in the path of the high beams, causing more light to be reflected back towards the driver's eyes.
Using low beams, on the other hand, produces less light and reduces the amount of scattering and reflection in the fog, resulting in better visibility. Therefore, it is recommended to use low beams when driving in foggy conditions to avoid glare and improve visibility.
To learn more about Tyndall effect, here
https://brainly.com/question/14431922
#SPJ4
Determine the number of moles present in each compound. 6.50 g ZnSO4.
The number of moles present in 6.50g of ZnSO4 is 0.0403 moles.
How to calculate no of moles?The number of moles in a substance can be calculated by dividing the mass of the substance by its molar mass as follows:
no of moles = mass ÷ molar mass
According to this question, 6.50 grams of zinc sulphate is given. The number of moles in the substance can be calculated as follows:
molar mass of zinc sulphate = 161.47 g/mol
no of moles = 6.50g ÷ 161.47 g/mol
no of moles = 0.0403 moles
Learn more about moles at: https://brainly.com/question/20928252
#SPJ1
How does latitude affect climate?
A
The closer to the poles, the warmer it gets.
B
The closer to the equator, the warmer it gets.
C
The higher you go up a mountain, the colder it gets.
D
The higher you go up a mountain, the warmer it gets.
Latitude affect climate because the closer to the equator, the warmer it gets. The correct answer is B.
How distance from equator affects climateThe temperature rises as one goes nearer to the equator. One of the key elements that influences climate is latitude. The amount of solar radiation received per unit area rises as you get towards the equator. This raises the temperature and increases evaporation, which causes an increase in precipitation. As a result, the equator's vicinity is typically characterized by a tropical or subtropical climate, marked by warm temperatures and high humidity.
The amount of solar energy received per unit area drops as you move further from the equator, resulting in colder temperatures and less evaporation, which in turn causes less precipitation. As a result, the climate is often colder, with lower temperatures and less humidity, in regions close to the poles.
Learn more on the equator here https://brainly.com/question/1264608
#SPJ1
Manipulate seven additional data sets and place these values in your Ocean Interactions
Worksheet.
Biodiversity
Arctic Ice
Technology Impact
Life Sustainability
1,000
3. 7
100
1,850
To manipulate seven additional data sets and place these values in your Ocean Interactions, follow these steps:
Step 1: Obtain the data sets
First, acquire the seven additional data sets that you want to include in your Ocean Interactions analysis. These data sets could be related to variables such as temperature, salinity, ocean currents, or marine life distributions.
Step 2: Organize the data
Next, organize the data sets by sorting, filtering, or aggregating them as needed to make them more manageable for analysis. This process may involve cleaning the data to remove any inconsistencies or errors, as well as converting the data into a compatible format for further manipulation.
Step 3: Manipulate the data
Using various data manipulation techniques, transform the additional data sets to create new variables or features that can help provide a deeper understanding of the Ocean Interactions. This manipulation could include calculations, statistical analysis, or creating visual representations to identify patterns or trends within the data.
Step 4: Integrate the data
Combine the manipulated additional data sets with the existing Ocean Interactions data to create a comprehensive analysis. This integration process may involve merging or joining data sets based on common variables or geographical locations, ensuring that the resulting data accurately reflects the interactions between various ocean-related factors.
Step 5: Analyze the data
With the additional data sets now integrated into your Ocean Interactions analysis, examine the relationships between the different variables to gain insights into the complex dynamics at play. This analysis could involve statistical tests, correlations, or predictive modeling techniques to better understand the underlying patterns and trends in the data.
Step 6: Interpret the results
Based on the analysis, draw conclusions about the role of the additional data sets in the overall Ocean Interactions. This interpretation should consider the potential implications of these findings for the broader understanding of ocean processes and the management of marine ecosystems.
By following these steps, you will successfully manipulate seven additional data sets and place these values in your Ocean Interactions analysis, enhancing your understanding of the complex dynamics involved in the marine environment.
To know more about Ocean Interactions refer here
https://brainly.com/question/30919252#
#SPJ11
Write a balanced equation for the
reaction between baking soda (NaHCO3) and HCl.
Answer:
NaHCO3 + HCl → NaCl + H2O + CO2
Explanation:
how can you determine the number of valence electrons in a atom of a representative element?
Answer:To determine the number of valence electrons in an atom of a representative element, you can look at its position on the periodic table. Representative elements are also known as the main group elements and are located in groups 1-2 and 13-18 of the periodic table.
The number of valence electrons in an atom of a representative element is equal to the group number. For example, the elements in group 1 (also known as the alkali metals) have 1 valence electron, while the elements in group 2 (the alkaline earth metals) have 2 valence electrons. The elements in group 13 (the boron group) have 3 valence electrons, and so on, up to group 18 (the noble gases), which have a full set of 8 valence electrons (except for helium, which has only 2).
For example, let's consider the element sodium (Na), which is in group 1. Sodium has 1 valence electron because it is in group 1. Similarly, the element carbon (C), which is in group 14, has 4 valence electrons because it is in group 14.
Knowing the number of valence electrons in an atom is important because it helps to determine the chemical properties and reactivity of the element. Atoms with the same number of valence electrons tend to have similar chemical properties and can form similar types of chemical bonds.
Explanation:
Three students are asked to discuss whether Gibbs Free Energy was positive or
negative for each dissolution. Select the student that employs correct
scientific reasoning.
. Student 1: The Gibbs Free Energy was negative for both reactions because the reactions were
spontaneous, the reactions happened.
• Student 2: The Gibbs Free Energy was positive for the first reaction because it got colder and
negative for the second reaction because it got hotter.
• Student 3: The Gibbs Free Energy was positive for both reactions because it is always positive for
dissolutions.
Student 3
Student 2
Student 1
In the next three problems, use the CER format to answer this guiding
Based on scientific reasoning, the correct student is Student 1.
The Gibbs Free Energy is negative for both reactions because they are spontaneous, meaning they occur naturally without the need for external input. This indicates that the reactions release energy and are thermodynamically favorable.
Student 2's reasoning is incorrect because the temperature change alone does not determine the Gibbs Free Energy.
Student 3's reasoning is also incorrect because the Gibbs Free Energy can be both positive and negative depending on the reaction conditions. Therefore, Student 1's explanation aligns with the laws of thermodynamics and is scientifically accurate.
To know more about Gibbs Free Energy click on below link:
https://brainly.com/question/13318988#
#SPJ11
A decomposition of hydrogen peroxide into water and oxygen gas is an exothermic reaction. If the temperature is initially 28˚ C, what would you expect to see happen to the final temperature? Explain what is happening in terms of energy of the system and the surroundings.
If the decomposition of hydrogen peroxide into water and oxygen gas is an exothermic reaction, we would expect the final temperature to be lower than the initial temperature of 28˚C.
This is due to the fact that energy is released from the system during an exothermic reaction in the form of heat into the surroundings. In other words, the energy of the reactants is more than that of the products, and the excess energy is released into the environment.
As a result, the environment's temperature will rise, while the system's temperature will fall. This indicates that the reaction's final temperature will be lower than its 28° C starting point.
To learn more about an exothermic reaction, follow the link:
https://brainly.com/question/10373907
#SPJ1
An analytical chemist is titrating 68.3ml of a 0.3400m solution of aniline c6h5nh2 with a 0.6100m solution of hio3. the pkb of aniline is 9.37. calculate the ph of the base solution after the chemist has added 42.1ml of the hio3 solution to it.
First, let's determine the moles of aniline in the initial 68.3 mL of 0.3400 M solution:
moles of aniline = 0.3400 mol/L × 0.0683 L = 0.02326 mol
Next, let's determine the moles of HIO3 added to the solution:
moles of HIO3 = 0.6100 mol/L × 0.0421 L = 0.02568 mol
Since HIO3 is a strong acid, it will completely react with aniline to form its conjugate acid, C6H5NH3+, and iodate ion, IO3-. This reaction can be represented as:
C6H5NH2 + HIO3 → C6H5NH3+ + IO3-
The moles of aniline that have reacted with HIO3 can be calculated as the difference between the initial moles of aniline and the moles of HIO3 added:
moles of aniline reacted = 0.02326 mol - 0.02568 mol = -0.00242 mol
Since the reaction goes to completion, the moles of C6H5NH3+ formed will be equal to the moles of HIO3 added, which is 0.02568 mol.
To calculate the concentration of C6H5NH3+ in the final solution, we need to divide the moles of C6H5NH3+ by the total volume of the solution:
final volume = 68.3 mL + 42.1 mL = 110.4 mL = 0.1104 L
[C6H5NH3+] = moles of C6H5NH3+ / final volume
[C6H5NH3+] = 0.02568 mol / 0.1104 L = 0.2329 M
To calculate the pH of the final solution, we need to first calculate the pKa of the C6H5NH3+ / C6H5NH2 conjugate acid-base pair:
pKa = pKb + log([H3O+]/[C6H5NH2])
At equilibrium, the concentration of C6H5NH3+ will be equal to the concentration of C6H5NH2, so we can simplify the equation:
pKa = pKb + log([H3O+]/[C6H5NH3+])
pKb = 9.37 (given)
Since the solution is acidic, we can assume that [H3O+] << [C6H5NH3+], so we can neglect the contribution of [H3O+] to the pH:
pH = pKa + log([C6H5NH2]/[C6H5NH3+])
pH = 9.37 + log(0.2329/0.02568)
pH = 9.37 + 1.662
pH = 11.03
Therefore, the pH of the final solution is 11.03.
To know more about aniline refer here
https://brainly.com/question/31081529#
#SPJ11
A sample of iron with a mass of 250.0 grams underwent a change in thermal energy of 5250
joules. Determine the change in temperature of the iron that occurred during this process.
The drinking water in Saplingville was found to contain 13 ppb (parts per billion) of lead. What is the concentration of lead in molarity?
Concentration of lead in Saplingville's drinking water: 6.28 x 10^-11 mol/L.
To calculate the concentration of lead in molarity, we need to follow these steps:
1. Convert ppb (parts per billion) to grams per liter (g/L)
2. Determine the molar mass of lead (Pb)
3. Calculate molarity using the formula: Molarity = (mass in grams / molar mass) / volume in liters
1. Conversion from ppb to g/L:
13 ppb = 13 micrograms/L (µg/L), since 1 ppb = 1 µg/L
13 µg/L = 13 x 10^-9 g/L (since 1 µg = 10^-9 g)
2. Molar mass of lead (Pb) is approximately 207.2 g/mol.
3. Calculate molarity:
Molarity = (13 x 10^-9 g/L) / (207.2 g/mol)
Molarity ≈ 6.28 x 10^-11 mol/L
The concentration of lead in Saplingville's drinking water is approximately 6.28 x 10^-11 mol/L.
To know more about ppb calculations:
https://brainly.com/question/31055662
#SPJ11
Find the mass of a sample of water if its temperature dropped 24. 8°C
when it lost 870 J of heat. Hint. Which formula are you going to use? See
interactive PPT. Don't forget the unit. Show your work.
How much heat is required to warm a 135g cup of water from 15 °C to
35°C? Hint: the water is in a cup so what state of matter and specific heat?
Show your work.
1. The mass of the water sample is approximately 8.77 grams.
2. Approximately 11,322 Joules of heat are required to warm a 135g cup of water from 15°C to 35°C.
We're given the values:
Q = -870 J (lost heat, so negative value)
ΔT = -24.8°C (temperature dropped)
c = 4.18 J/(g°C) (specific heat capacity of water)
Rearrange the formula to solve for mass:
m = Q / (cΔT)
Plug in the values:
m = -870 / (4.18 × -24.8)
m ≈ 8.77 g
The mass of the water sample is 8.77 grams.
We're given the values:
m = 135 g
ΔT = 35°C - 15°C = 20°C
c = 4.18 J/(g°C) (specific heat capacity of water)
Now, use the formula Q = mcΔT to find the heat required:
Q = 135 × 4.18 × 20
Q ≈ 11322 J
Approximately 11,322 Joules of heat are required to warm a 135g cup of water from 15°C to 35°C.
To know more about specific heat capacity click on below link:
https://brainly.com/question/29766819#
#SPJ11
write the net ionic equation for the equilibrium that is established when sodium cyanide is dissolved in water. This solutions is: (acid, base, neutral)
The net ionic equation for the equilibrium that is established when sodium cyanide (NaCN) is dissolved in water is:
NaCN + H2O ⇌ CN- + Na+ + H2O
In this equation, the cyanide ion (CN-) is produced by the dissociation of NaCN in water. The sodium ion (Na+) and water (H2O) are spectator ions and do not participate in the reaction. Therefore, they are not included in the net ionic equation.
This solution is basic because the cyanide ion is a weak base and can hydrolyze water to produce hydroxide ions (OH-) according to the following reaction:
CN- + H2O ⇌ HCN + OH-
The equilibrium constant for this reaction is relatively small, but it is enough to make the solution basic.
Visit here to learn more about ionic equation brainly.com/question/29299745
#SPJ11
1. Albertans experience extreme temperature ranges from summer months to winter months.
The air pressure inside a car tire in summer at 25.0 °C is 310 kPa. If the volume remains
fixed, what is the pressure in the winter at -30.0 °C?
Assuming ideal gas behavior, the pressure in the winter at -30.0 °C would be approximately 166.3 kPa.
The pressure of a gas is directly proportional to its temperature, according to the ideal gas law.
Therefore, if the temperature of the gas inside a car tire changes, the pressure will change as well, assuming the volume remains constant.
To solve this problem, we can use the combined gas law, which relates the pressure, temperature, and volume of a gas. The formula is:
[tex]P1/T1 = P2/T2[/tex]
where P1 and T1 are the initial pressure and temperature, respectively, and P2 and T2 are the final pressure and temperature.
Using this formula, we can solve for the final pressure as follows:
[tex]P2 = (P1*T2)/T1[/tex]
Plugging in the values given in the problem, we get:
[tex]P2 = (310 kPa * (-30.0 + 273.15) K) / (25.0 + 273.15) K[/tex]
P2 = 166.3 kPa
Therefore, the pressure inside the car tire in winter at -30.0 °C is 166.3 kPa. This represents a decrease in pressure compared to the summer pressure of 310 kPa.
It is important to note that the ideal gas law assumes that the volume remains constant, which may not be the case in real-world situations where the volume of a tire can change due to various factors such as wear and tear.
For more such questions on pressure, click on:
https://brainly.com/question/24719118
#SPJ11
Part D
Press the yellow reset button at the bottom of the simulation screen. Under Constant Parameter, select Volume. Again,
pump the pump handle once to introduce 40 to 50 gas molecules. Record the pressure in the data table.
Use the heat control to heat the gas to each of the other temperatures in the data table, and record the new pressure.
Answer from Edmentum :)
The instruction is to use the PhET simulation to perform an experiment where the constant parameter is set to volume, and then to pump 40 to 50 gas molecules into the simulation.
The pressure of the gas is recorded in a data table. Next, the heat control is used to heat the gas to each of the other temperatures in the data table, and the corresponding new pressure values are recorded in the data table. This experiment demonstrates the relationship between pressure and temperature, which is known as the ideal gas law.
By holding the volume constant and changing the temperature, we can observe how the pressure of the gas changes. This experiment is useful in understanding real-world phenomena such as how temperature affects the pressure of gas inside a container, such as a tire or a balloon.
To know more about the Pressure, here
https://brainly.com/question/15813117
#SPJ4
What are the units and symbols used to describe atomic mass?
What element was used to calculate this unit?
What device can be used to determine the elements found in an unknown substance?
(73 points)
Atomic mass unit (amu) is used to describe atomic mass, with the symbols "u" or "Da" used to represent it. Carbon-12 was used as the reference element to define the atomic mass unit. A spectrometer can be used to determine the elements found in an unknown substance.
How do people tend to use land as the human population increases?
A. Developed land is converted to wetlands.
B. More land becomes available for wildlife habitats.
C. Urban land becomes cropland.
D. Grasslands are used for cropland
D. Grasslands are converted to cropland
As the human population grows, individuals use land in a variety of ways to suit their requirements, including housing, agriculture, industry, and transportation.
This usually results in more urbanization and the change of natural habitats to human-dominated environments. Some examples of common land-use shifts are:
D. Grasslands are converted to cropland: As food need grows, grasslands are frequently converted to cropland for agricultural production. This can result in soil degradation, biodiversity loss, and other environmental consequences.
As the human population expands, so does the need for resources and space, resulting in a variety of changes in land usage. The conversion of natural habitats such as forests and grasslands into human-dominated landscapes is one of the major land-use shifts.
This process, referred to as urbanization, frequently includes the creation of buildings, roads, and other infrastructure to support human activity. Furthermore, as the demand for food and other agricultural products grows, more land is converted to agriculture.
These land-use changes can have serious environmental consequences, such as habitat loss, soil degradation, and biodiversity loss. As a result, it is critical to think about the potential repercussions of land usage and design sustainable practices that balance human demands with environmental conservation.
learn more about the population here
https://brainly.com/question/29367909
#SPJ1
A gas sample occupies a volume of 155 mL at a temperature of 316 K and a pressure of 0. 989 atm. How many moles of gas are there?
2Points
Show your work
There are approximately 0.00614 moles of gas in the sample.
To find the number of moles of gas in the sample, we will use the Ideal Gas Law formula: PV = nRT.
Given:
Volume (V) = 155 mL = 0.155 L (converted to liters)
Temperature (T) = 316 K
Pressure (P) = 0.989 atm
Gas constant (R) = 0.0821 L atm / K mol
We need to find the number of moles (n).
Rearranging the formula for n: n = PV / RT
1. Convert the volume to liters: 155 mL = 0.155 L
2. Plug in the given values into the formula: n = (0.989 atm) x (0.155 L) / (0.0821 L atm / K mol) x (316 K)
3. Simplify the equation and solve for n: n ≈ 0.00614 mol
To know more about Ideal Gas Law click on below link:
https://brainly.com/question/28257995#
#SPJ11