find the equation of the line. the line passes through the points (5, 2) and (- 4, - 4)

Work Shown:

x = first integer

x+1 = second consecutive integer just after x

x+2 = third consecutive integer just after x+1

x+3 = fourth consecutive integer just after x+2

Add up those expressions

(x)+(x+1)+(x+2)+(x+3) = 4x+6

That sum is "16 less than 6 times the first integer", so,

sum = 6*(first) - 16

4x + 6 = 6x - 16

4x-6x  = -16-6

-2x  = -22

x = -22/(-2)

x = 11 is the first integer

The four consecutive integers are 11, 12, 13, 14.

As a check, the sum is 11+12+13+14 = 50

Then notice how 6x-16 = 6*11-16 = 50 to help confirm we have the correct answer.

Answer:

Its speed should increase by 9.5km/hr

Step-by-step explanation:

speed is calculated by distance divided by time

we know that it took the tanker 10 hours to drive 380km (38km times 10 hours)

so if we divide the 380km by 8 hours we see that he should be driving at 47.5km/hr in order to travel the same distance in 8 hours

the question asks by how much speed should it INCREASE, so we subtract the 38km from the 47.5km to find the difference in speed, which is 9.5km

The estimated cardiac output for the time interval [0, 3] is -9 L/s. that a negative value may indicate an error in the calculation or a direction opposite to the Conventional flow of cardiac output.

The cardiac output using the dye dilution method, we need to calculate the integral of the dye concentration function over the specified time interval [0, 3]. The integral represents the total amount of dye that passes through the system, which is proportional to the cardiac output.

The dye concentration function is given by c(t) = 6t(5 - t), where c(t) represents the concentration in mg/L and t represents the time in seconds.

To find the cardiac output, we need to integrate the concentration function over the interval [0, 3]:

Cardiac Output = ∫[0,3] c(t) dt

Substituting the given function c(t) = 6t(5 - t) into the integral, we have:

Cardiac Output = ∫[0,3] 6t(5 - t) dt

Expanding the expression and integrating term by term, we get:

Cardiac Output = ∫[0,3] (30t - 6t^2) dt

Integrating each term separately, we have:

Cardiac Output = [15t^2 - 2t^3] evaluated from 0 to 3

Plugging in the upper and lower limits, we get:

Cardiac Output = [15(3)^2 - 2(3)^3] - [15(0)^2 - 2(0)^3]

Simplifying the expression, we have:

Cardiac Output = [45 - 54] - [0 - 0]

Cardiac Output = -9 L/s

Therefore, the estimated cardiac output for the time interval [0, 3] is -9 L/s. that a negative value may indicate an error in the calculation or a direction opposite to the conventional flow of cardiac output.

To learn more about Conventional .

https://brainly.com/question/30168776

#SPJ8

Answer:

Slope is 5

Step-by-step explanation:

Slope-intercept form for a linear equation is y=mx+b where m is the slope and b is the y-intercept.

In this equation, our slope is m=5, and the y-intercept would be b=1.

The probability that the third largest observation in the sample is less than 0.7 is  0.2401 =  24.01%.

The sample size n = 5,

Therefore the order statistics will be represented as X₁, X₂, X₃, X₄, and X₅.

Probability that X₃ is less than 0.7:

Since X₃ is the third largest observation =  (X₁ and X₂) < 0.7.

The probability that X₃ is less than 0.7 is (0.7)² = 0.49.

.

The probability that both X₁ and X₂ are less than or equal to 0.7 is (0.7)² = 0.49 because in a continuous uniform distribution, the probability of any single observation being less than 0.7 is 0.7 - 0 = 0.7.

We then get the product of both cases:

Probability = 0.49 * 0.49 = 0.2401

Learn more about Probability at:

https://brainly.com/question/24756209

#SPJ1

It should be noted that since the total volume of concrete figures is 5 cubic feet, the library should order 6 cubic feet of concrete to minimize leftover concrete.

We can also solve this problem by using the following equation:

Total volume of concrete figures = Number of figures * Volume of each figure

Plugging in the known values, we get:

Total volume of concrete figures = 5 figures * 1 cubic foot/figure = 5 cubic feet

Since the total volume of concrete figures is 5 cubic feet, the library should order 6 cubic feet of concrete to minimize leftover concrete.

Learn more about volume on

https://brainly.com/question/27710307

#SPJ1

Answer:

  (D)  (6 -z) + (z -5)

Step-by-step explanation:

You want the equivalent of the absolute value expression for the domain z < 5:

  |z -6| -|z -5|

The expression |z -6| is defined as -(z -6) for z < 6.

The expression |z -5| is defined as -(z -5) for z < 5.

The difference of the two expressions for z < 5 is ...

  (-(z -6)) -(-(z -5))

  = (6 -z) +(z -5) . . . . . . matches choice D

__

Additional comment

The absolute value function negates its argument when that argument is negative. For the given domain, z < 5, both arguments are negative, so both are negated.

<95141404393>

The solution set of y (0, 3) and (0, 9)

For x there is no point is given.

The Cartesian System is the system that we use to name points in a plane. The number line gives rise to the cartesian form.

To comprehend the cartesian coordinate system, we must first master the number line. We have the following parameters defined in this system:

⇒ The X-axis and Y-axis are two perpendicular lines.

⇒ The plane is known as the Cartesian, or coordinate plane, and the two lines X and Y, when combined, are known as the system's coordinate axes.

⇒ The plane is divided into four quadrants by the two coordinate axes.

⇒ The intersection of the axes is the Cartesian System's zero. This point will be designated by the letter O. The origin's coordinates are indicated as (0, 0).

⇒ To describe the location of any point P in the plane, we measure the distance x along X, followed by the distance y parallel to Y, to go from O to P. Distances can be detrimental.

Then,

For the X axis all the points on the x axis be the solutions of x.

Since,

There are no points of x axis is given.

For the Y axis all the points on the y axis be the solutions of y.

Since,

Here,

(0, 3) and (0, 9) are the solution set of  for y.

Learn more about the coordinate visit:

https://brainly.com/question/24394007

#SPJ1

The scale factor that was used to create triangle D' include the following: C. Scale factor of 1/2

In Mathematics and Geometry, the scale factor of a geometric figure can be calculated by dividing the dimension of the image (new figure) by the dimension of the pre-image (original figure):

Scale factor = Dimension of image (new figure)/Dimension of pre-image (original figure)

By substituting the given dimensions into the formula for scale factor, we have the following;

Scale factor = Dimension of image/Dimension of pre-image

Scale factor = 8/16 = 6/12 = 10/20

Scale factor = 1/2.

Read more on scale factor here: brainly.com/question/29967135

#SPJ1

Answer:

x=10,y=120

Step-by-step explanation:

3x-30=60 CDA

3x=30

x=10

again,

y+60=180 straight line

y = 120

By following these guidelines given below, teens can support the development of a healthy and resilient brain as they transition into adulthood.

A teen's decision-making can have a significant impact on their brain development. During adolescence, the brain undergoes structural and functional changes, particularly in the prefrontal cortex, which is responsible for decision-making, impulse control, and reasoning. The brain's reward center, the limbic system, also plays a prominent role during this period. When teens make choices, especially those related to risk-taking behaviors, it can affect the development and wiring of these brain regions.

To help teens strengthen their brains as they mature into adults, here is some advice:

Engage in balanced and healthy activities: Encourage teens to participate in a range of activities that promote physical, mental, and emotional well-being, such as exercise, reading, hobbies, and creative outlets.

Foster critical thinking skills: Encourage teens to question information, think critically, and consider the consequences of their decisions. Engaging in debates, discussing ethical dilemmas, and seeking multiple perspectives can help develop critical thinking abilities.

Practice self-regulation: Encourage teens to develop self-control and impulse management skills. This can involve techniques like deep breathing, mindfulness, and taking a pause before making impulsive decisions.

Seek positive role models and peer groups: Encourage teens to surround themselves with positive influences and supportive friends who engage in responsible behaviors and make sound decisions.

Prioritize sleep and stress management: Emphasize the importance of adequate sleep and stress reduction techniques, as these factors greatly impact brain health and cognitive function.

By following these guidelines, teens can support the development of a healthy and resilient brain as they transition into adulthood.

For more questions on adulthood

https://brainly.com/question/3522507

#SPJ8

Answer:

Step-by-step explanation:

The correct equation that shows a step in the process of completing the square on the given quadratic y = x^2 + 8x – 3 is y = x^2 + 8x + 16 – 3 – 16. Completing the square involves adding and subtracting a constant term in order to create a perfect square trinomial. In this case, the constant term added is (8/2)^2 = 16, which is half the coefficient of the x-term squared. This step transforms the quadratic into the form (x + a)^2 + b, where a represents half of the x-term coefficient and b represents the constant term.

By adding 16 to the equation to create a perfect square trinomial, we need to subtract 16 afterward to maintain the equation’s balance. Thus, the equation becomes:

y = x^2 + 8x + 16 - 3 - 16

Simplifying further:

y = (x + 4)^2 - 19

Therefore, the correct equation is:

y = (x + 4)^2 - 19

11t = 8(t + 1) - 0.5

11t = 8t + 8 - 0.5

3t = 7.5

t = 7.5 / 3

t = 2.5

2.5 + 1

3.5 hours

Jack took approximately 3.5 hours to cycle from home to the park.

To calculate the variance for a population, the sum of squares (SS) is divided by the total number of observations in the population (N), not N-1. False.

The formula for population variance is:

Variance = SS/N

Where SS is the sum of squares, calculated by summing the squared differences between each observation and the population mean.

Dividing by N in the formula gives the population variance, which represents the average squared deviation from the population mean. This formula provides an unbiased estimate of the true variance of the entire population.

On the other hand, when calculating the variance for a sample (a subset of the population), we divide the sum of squares by N-1.

This correction factor of N-1 is used to account for the degrees of freedom lost when estimating the population variance from a sample.

By dividing by N-1, we obtain an unbiased estimate of the variance of the larger population from which the sample was drawn.

Therefore, for calculating the variance of a population, SS is divided by N, not N-1.

For similar question on variance.

https://brainly.com/question/25639778  

#SPJ8

Answer:

11.5

Step-by-step explanation:

Given:

Left side = 8

Bottom = a

Right side = 14

Using the Pythagorean theorem:

[tex]ax^{2}[/tex] + [tex]8x^{2}[/tex] = [tex]14x^{2}[/tex]

Simplifying the equation:

[tex]ax^{2}[/tex] + 64 = 196

Subtracting 64 from both sides:

[tex]ax^{2}[/tex]  = 132

Taking the square root of both sides:

a = [tex]\sqrt{132}[/tex]

Calculating the approximate value of "a":

a ≈ 11.5 (rounded to the nearest tenth)

Therefore, the value of "a" in the given right triangle is approximately 11.5.

Answer:

D. Exactly 1 solution

Step-by-step explanation:

The system of equations has exactly one solution because when we solved the equations, we found a unique set of values for the variables x and y that satisfy both equations simultaneously.

In this case, we determined that x = 1 and y = 6 satisfy both equations:

For the equation y = 4x + 2, when we substitute x = 1, we get y = 4(1) + 2 = 6.

For the equation y - 2x = 4, when we substitute x = 1 and y = 6, we have 6 - 2(1) = 6 - 2 = 4.

Therefore, the values x = 1 and y = 6 make both equations true, and there are no other values of x and y that satisfy the system. Hence, the system of equations has exactly one solution.

Answer: Put an arrow from -3 to the space that is to the left of -5.

It shows the equation -3 - 2 1/3.

Using the standard normal table the probability P(-0.6 < Z < 1.1) assuming a standard normal distribution is approximately 0.5900 or 59%.

To locate the possibility P(-zero.6 < Z < 1.1) the usage of the usual ordinary distribution, we need to find the place beneath the usual ordinary curve between the z-ratings -0.6 and 1.1.

Using a well known normale table or a calculator, we are able to discover the corresponding cumulative chances for these z-scores.

For z = -0.6, the cumulative probability is 0.2743.

For z = 1.1, the cumulative probability is 0.8643.

To discover the probability between those  z-ratings, we subtract the cumulative probability of -0.6 from the cumulative chance of 1.1:

P(-0.6 < Z < 1.1) = 0.8643 - 0.2743 = 0.5900

Thus, the probability P(-0.6 < Z < 1.1) assuming a standard normal distribution is approximately 0.5900 or 59%.

For more details regarding probability, visit:

https://brainly.com/question/31828911

#SPJ1

The amount of three shares are; 26 , 78,  and 130.

We know that ratio is described as the comparison of two quantities to determine how many times one obtains the other. The proportion can be expressed as a fraction or as a sign between two integers.

The sum of the ratio = 1/2+1/3+ 1/4 = 6 + 4 + 3 /12

=  13/12

Then first share = 1/9 × 234

=26 $

Then second share = 3/9×234

=78 $

Then third share = 5/9 × 234

=130 $

Learn more about the ratio here:

brainly.com/question/13419413

#SPJ1

The area of the surface generated when f(x) = x^2 is rotated about the y-axis is (π/6)(9^(3/2)-5^(3/2)).

To determine the surface area of a curve when it is rotated about an axis, we can use the formula S= 2π∫a^b xf(x)√(1+(f′(x))^2)dx, where a and b are the limits of integration.

This formula provides the area of the surface formed when a curve is rotated about an axis.Let's suppose we have a curve f(x) = x^2.

To find the area of the surface generated when the curve is rotated about the y-axis, we will have to use the formula S = 2π∫0^1 x√(1+(2x)^2)dx.

When we calculate this integral,

we get S= 2π∫0^1 x√(1+4x^2)dx.

Using a u-substitution,

let u=1+4x^2, du=8xdx.

This simplifies the integral to S = (π/2)∫5^9 u^(1/2)du.

This integral evaluates to (π/6)(9^(3/2)-5^(3/2)).

To learn more about : area

https://brainly.com/question/25292087

#SPJ8

The total number of coins that were in Kay's bank are 137 coins.

In order to determine the number of dimes and nickels, we would assign a variables to the unknown numbers and then translate the word problem into algebraic equation as follows:

Since she has 11 less dimes than nickels, an equation which models this situation is given by;

n = d + 11     ....equation 1.

Note: 1 nickel is equal to 0.05 dollar and 1 dime is equal to 0.1 dollar.

Additionally, the coins are worth 10 dollars;

0.1d + 0.05n = 10 ....equation 2.

By solving both equations simultaneously, we have:

0.1d + 0.05(d + 11) = 10

0.1d + 0.05d + 0.55 = 10

0.15d = 9.45

d = 63 dimes.

For nickels, we have:

n = d + 11

n = 63 + 11

n = 74

Now, we can determine the total number of coins;

Total number of coins = n + d

Total number of coins = 74 + 63

Total number of coins = 137 coins.

Read more on equations here: brainly.com/question/1511173

#SPJ1

The number 5 represents the 5 dogs that are more than 8 years old, and the Number 2 represents the 2 cats that are more than 8 years old.

Based on the given data, we can create a Venn diagram to illustrate the number of animals that are dogs and are more than 8 years old.

Let's label two intersecting circles representing dogs and cats respectively. In the region where the circles overlap, we will place the animals that are both dogs and more than 8 years old.

First, let's count the number of dogs that are more than 8 years old. Based on the data, we have the following dogs that fit this criterion:

- Dog: 8 (not more than 8 years old)

- Dog: 9

- Dog: 12

- Dog: 9

- Dog: 11

So, there are a total of 5 dogs that are more than 8 years old.

Now, let's count the number of cats that are more than 8 years old. Based on the data, we have the following cats that fit this criterion:

- Cat: 9

- Cat: 13

So, there are a total of 2 cats that are more than 8 years old.

To create the Venn diagram, we will place the number 5 inside the region representing dogs, and the number 2 inside the region representing cats. The region where the circles overlap will be left empty since there are no animals that are both dogs and cats in this dataset.

The Venn diagram representing the number of animals that are dogs and are more than 8 years old would look as follows:

         Dogs

       ___________

      |      |      |

      |  5   |      |

      |______|______|

         Cats

       ___________

      |      |      |

      |      |  2   |

      |______|______|

In the Venn diagram, the number 5 represents the 5 dogs that are more than 8 years old, and the number 2 represents the 2 cats that are more than 8 years old.

To know more about Number .

https://brainly.com/question/26460978

#SPJ8

The weight of the empty glass is 5.5 ounces. [True]

The glass is filled with water 1.5 inches from the top. [True]

One cubic inch of water weighs 0.6 ounce. [True]

The weight of the water in the glass is approximately 11.88 ounces. [True]

Let's analyze the given information and determine which statements are true:

The weight of the empty glass is 5.5 ounces.

Water is poured into the glass until it is 1.5 inches from the top.

0.6 ounces equal one cubic inch of water in weight.

Now, let's consider some additional calculations to verify if other statements can be determined:

The glass is cylindrical, and we know its base radius is 1.4 inches and its height is 7.5 inches. To find the volume of the glass, we can use the formula for the volume of a cylinder:

Volume = π * radius^2 * height

Substituting the given values:

Volume = π * (1.4 inches)^2 * 7.5 inches

Volume ≈ 29.484 cubic inches

Since the glass is filled with water up to 1.5 inches from the top, we can calculate the volume of water in the glass:

Water volume = Total volume - Volume of empty space

Water volume = 29.484 cubic inches - (1.5 inches * π * (1.4 inches)^2)

Water volume ≈ 29.484 cubic inches - 9.678 cubic inches

Water volume ≈ 19.806 cubic inches

Now, we can find the weight of the water in the glass by multiplying the volume by the weight of one cubic inch of water:

Water weight = Water volume * Weight per cubic inch

Water weight ≈ 19.806 cubic inches * 0.6 ounces/cubic inch

Water weight ≈ 11.8836 ounces

for such more question on weight

https://brainly.com/question/18072905

#SPJ8

Answer:

x = 70 °

Step-by-step explanation:

Two sides (CB & CA) of an isosceles triangle are equal.

The two angles (CBA & CAB) surrounding the third side (BA) are also equal.

The interior angles of a triangle add up to 180°.

180 = 40 + x + x

180 = 40 + 2x

140 = 2x

x = 70

Answer: 70 °

Step-by-step explanation: I used a protractor and if there are 40 ° at the top and the side lengths are all the same then you get 70 ° for x.

Answer:

Make the -4 exponent in the denominator positive.

1) a. Maximum = 8

Minimum = 2

b. Mid-line => y = 5

c. Period = 40     ; Rate constant = 1/40

d. Formula => y = -3cos(πx/20) + 5

e. f. the graph is given below.

Here,

given that,

Marissa is watching a honeybee return from her flower garden to a beehive in a branch of a nearby tree. She notices that the bee's path resembles part of a trigonometric function (see below).

Suppose that the flower is 2 ft above the ground, the beehive is 8 ft above the ground, and the horizontal distance from the flower to the beehive is 20 ft. Model this path with a sine or cosine function.

we have,

from the given information, we get,

1) a. Maximum = 8

Minimum = 2

b. Mid-line => y = 5

c. Period = 40     ; Rate constant = 1/40

d. Formula => y = -3cos(πx/20) + 5

e. f. the graph is given below.

To learn more on graph click:

brainly.com/question/17267403

#SPJ1

6 kiloliters are approximately equal to 202,884.14 fluid ounces.

We have,

To convert 6 kiloliters (kL) to fluid ounces (fl oz), we need to use the conversion factor between these two units.

The conversion factor states that 1 kiloliter is equal to 33814.0227 fluid ounces.

This means that for every kiloliter, there are 33814.0227 fluid ounces.

To convert 6 kiloliters to fluid ounces, we multiply the given value (6 kL) by the conversion factor (33814.0227 fl oz/kL).

= 6 kL x 33814.0227 fl oz/kL

= 202884.1362 fl oz

Therefore,

6 kiloliters are approximately equal to 202,884.14 fluid ounces.

Learn more about unit conversion here:

https://brainly.com/question/13899873

#SPJ1

The constant k that makes f(x) = k * e^(x - 1) a probability density function on the interval [0,1] is k = e / (e - 1).

To determine the constant k that makes the function f(x) = k * e^(x - 1) a probability density function on the interval [0,1], we need to ensure that the following conditions are satisfied:

The function is non-negative: f(x) ≥ 0 for all x in [0,1].

The integral of the function over the interval [0,1] is equal to 1: ∫[0,1] f(x) dx = 1.

Let's analyze each condition step by step:

Non-negativity:

For f(x) to be non-negative on [0,1], we need k * e^(x - 1) ≥ 0.

Since k is a constant, it is always positive or zero. So, k ≥ 0.

Integral equal to 1:

To find the value of k that makes ∫[0,1] f(x) dx equal to 1, we integrate the function over the interval [0,1] and set it equal to 1:

∫[0,1] f(x) dx = ∫[0,1] k * e^(x - 1) dx

Using the properties of exponential functions, we can simplify the integral:

∫[0,1] k * e^(x - 1) dx = k * ∫[0,1] e^(x - 1) dx

= k * [e^(x - 1)] evaluated from 0 to 1

= k * (e^(1 - 1) - e^(0 - 1))

= k * (1 - 1/e)

We want this expression to equal 1:

k * (1 - 1/e) = 1

Solving for k:

k = 1 / (1 - 1/e)

k = e / (e - 1)

Therefore, the constant k that makes f(x) = k * e^(x - 1) a probability density function on the interval [0,1] is k = e / (e - 1).

for such more question on probability

https://brainly.com/question/13604758

#SPJ8

Answer:

B.  1.5832

Step-by-step explanation:

A Probability Density Function (PDF) is a function that provides the likelihood of a random variable falling within a particular range of values.

The probability of X landing somewhere between a and b is:

[tex]\displaystyle P(a \leq X \leq b)=\int_{a}^{b} f_X(x)\; \text{d}x[/tex]

[tex]\textsf{where\;$f_X(x)$\;is\;the\;PDF.}[/tex]

For the given function f(x) to be a probability density function (pdf) on the interval [0, 1], the function must satisfy two conditions:

For function f(x) to be non-negative on [0, 1], k must be greater than or equal to 0.

To find the value of k, set the integral of the function to 1 and solve for k:

[tex]\begin{aligned}\displaystyle \int^{1}_{0} ke^{x-1}\; \text{d}x&=1\\\\k\int^{1}_{0} e^{x-1}\; \text{d}x&=1\\\\\int^{1}_{0} e^{x-1}\; \text{d}x&=\dfrac{1}{k}\\\\\left[\vphantom{\dfrac12}e^{x-1}\right]^1_0&=\dfrac{1}{k}\\\\e^{1-1}-e^{0-1}&=\dfrac{1}{k}\\\\e^0-e^{-1}&=\dfrac{1}{k}\\\\1-\dfrac{1}{e}&=\dfrac{1}{k}\\\\\dfrac{e-1}{e}&=\dfrac{1}{k}\\\\k&=\dfrac{e}{e-1}\\\\k&=1.58197670...\\\\k&=1.5820\; \sf(4\;d.p.)\end{aligned}[/tex]

Therefore, k = 1.5820, rounded to four decimal places.

The closest match from the given answer options is B) k = 1.5823.

However, please note that k = 1.5823 returns an area under the curve of 1.00020436023442, which is not exactly 1.

[tex]\hrulefill[/tex]

Differentiation rules used:

[tex]\boxed{\begin{minipage}{5.5 cm}\underline{Differentiating $e^{f(x)}$}\\\\If $y=e^{f(x)}$, then $\dfrac{\text{d}y}{\text{d}x}=f\:'(x)e^{f(x)}$\\\end{minipage}}[/tex]

[tex]\boxed{\begin{minipage}{4 cm}\underline{Differentiating $ax$}\\\\If $y=ax$, then $\dfrac{\text{d}y}{\text{d}x}=a$\\\end{minipage}}[/tex]

[tex]\boxed{\begin{minipage}{4cm}\underline{Differentiating a constant}\\\\If $y=a$, then $\dfrac{\text{d}y}{\text{d}x}=0$\\\end{minipage}}[/tex]

Height = 210 + 33(t - 2001)

b) The tree will be 2388 cm tall in 2067

c) The heights form an arithmetic progression.

We have,

a)

To model the growth of the tree using a linear equation, we can express it as:

Height = Initial Height + Growth Rate x Number of Years

In this case:

Initial Height = 210 cm

Growth Rate = 33 cm/year

Number of Years = (Current Year) - (Year when Renata moved in)

Let's denote the Current Year as "t." Since Renata moved into her house in 2001, the number of years can be represented as (t - 2001).

Putting it all together, the linear equation that models the height of the tree is:

Height = 210 + 33(t - 2001)

b)

To find the height of the tree in 2067, we substitute t = 2067 into the equation:

Height = 210 + 33(2067 - 2001)

Height = 210 + 33(66)

Height = 210 + 2178

Height = 2388 cm

Therefore, the tree will be 2388 cm tall in 2067.

c)

To check if the heights form an arithmetic progression, we need to determine if the differences between consecutive terms are constant.

In this case, the growth rate of the tree is 33 cm per year, which means the height increases by 33 cm each year.

Since the growth rate is constant, the heights form an arithmetic progression.

Thus,

a)

Height = 210 + 33(t - 2001)

b) The tree will be 2388 cm tall in 2067

c) The heights form an arithmetic progression.

Learn more about arithmetic sequence here:

https://brainly.com/question/10396151

#SPJ1

The complete question:

Since Renata moved into her house in 2001, she has been monitoring the height of the tree in front of her house. When it arrived, the tree was 210 cm tall and has been growing 33 cm per yeara) What is the linear equation that models this event? b) How big will the tree be in 2067? c) Area 3: Check it as an arithmetic progression.