Food insecurity and nutritional insecurity of the third world countries have many background features. Food insecurity refers to the lack of sufficient, safe, and nutritious food for an active and healthy life.
The following are the background features of food insecurity and nutritional insecurity in third world countries:1. High poverty levels, poor economic growth, and income inequality2. Political instability, civil wars, and conflicts3. Poor governance and corruption in the administration of food resources4. Limited access to credit, education, and health care5. Climate change and extreme weather events6. Over-reliance on food imports and unsustainable agricultural practicesAvian flu is a highly infectious viral disease that affects birds, particularly domestic poultry. Avian flu can also infect humans, with a high risk of mortality in severe cases. The scientific name of mad cow disease is bovine spongiform encephalopathy (BSE). The basic reason behind mad cow disease is the consumption of contaminated feed by cattle. The feed was contaminated with infectious prions that caused the disease. When infected cattle were consumed by humans, a new variant of Creutzfeldt-Jakob disease (vCJD) was developed that is fatal.
For more information on nutritional visit:
brainly.com/question/31555800
#SPJ11
Do you think Environmental laws are implemented properly in your Local Government? • If YES, please cite situations in which it is properly implemented and cite which section/s which it is compliant • If NO, discuss a program to make sure your community complies with a section in an environmental law. Cite the RA and the specific section
Environmental laws are implemented at both national and local levels to ensure the protection and preservation of our environment. In my opinion, while there are instances where these laws are implemented correctly, there is still room for improvement in some local governments where non-compliance is an issue.
For instance, some cities may fail to comply with the mandated disposal and segregation of waste materials. In order to improve compliance with environmental laws in these cases, there is a need to develop an environmental program that educates and encourages community members to act in accordance with environmental laws.
One such program is the “Ecological Solid Waste Management Act of 2000” or Republic Act No. 9003. This law mandates that all local governments should establish a solid waste management program and provides guidelines for waste segregation, transportation, and disposal.
To ensure compliance with this law, local governments should put in place a solid waste management plan that is designed to educate and encourage citizens to adopt a zero-waste lifestyle. They should also establish recycling and composting centers, and put in place strict guidelines for the collection and disposal of waste.
In conclusion, while environmental laws are implemented at both national and local levels to ensure the protection and preservation of our environment, non-compliance is still an issue in some local governments. Therefore, there is a need for the establishment of programs that encourage compliance with environmental laws to achieve sustainable development.
To know more about Environmental laws visit:
brainly.com/question/30107873
#SPJ11
1. How are common reflective optical telescopes similar from the Hubble Space Telescope (HST) and the James Webb Space Telescope (JWST)? Give 3 similarities for each.
2. How are common reflective optical telescopes different from the Hubble Space Telescope (HST) and the James Webb Space Telescope (JWST)? Give 3 differences for each.
3. Why do we need to put HST and JWST into space? How did it improve the images we get from these telescopes?
1. Similarities between common reflective optical telescopes and HST and JWST:Reflective telescopes use mirrors to reflect and focus incoming light.Both HST and JWST use reflective mirrors to capture images.The telescopes have an ability to capture high resolution images of objects in space.
2. Differences between common reflective optical telescopes and HST and JWST:Common reflective telescopes are often situated on the Earth's surface, whereas HST and JWST are positioned in space.HST and JWST are more sophisticated than common reflective telescopes, with better mirrors and more advanced technology for capturing images.HST and JWST have a better ability to observe objects in ultraviolet and infrared wavelengths than common reflective telescopes.3. HST and JWST were placed in space to improve the quality of images we get from telescopes. By placing the telescopes in space, they can avoid the distortion caused by the Earth's atmosphere. HST was a major improvement over previous telescopes, with higher resolution images and the ability to observe in ultraviolet light. JWST is the successor to HST and is designed to capture images in infrared light, which will allow scientists to see even further into the universe.
For more information on optical telescopes visit:
brainly.com/question/18300677
#SPJ11
what portion of the ball reflects the light explain
The portion of the ball that reflects light is the surface of the ball. When light falls on an object, it interacts with the surface of the object. The surface of the ball reflects some of the light that falls on it, while the rest is absorbed by the ball.
The surface of the ball is what we see when we look at it. When light falls on the surface of the ball, it is reflected in different directions. This reflection is what makes the ball visible to us. The amount of light reflected by the surface of the ball depends on the material that the ball is made of. A shiny ball will reflect more light than a dull ball. This is because the surface of the shiny ball is smoother, which allows the light to reflect more easily. On the other hand, the surface of a dull ball is rougher, which makes it harder for the light to reflect.
In addition to the material that the ball is made of, the angle at which the light falls on the ball also affects the amount of light that is reflected. When the light falls on the ball at a steep angle, less light is reflected. However, when the light falls on the ball at a shallow angle, more light is reflected.
Know more about reflection here:
https://brainly.com/question/26655381
#SPJ8
A pseudo-colour image ... a Uses colour to represent some property such as height, vegetation density, soil moisture, etc. b Is a combination of three images, where each image contains reflectance in a certain wavelength band. c Is a combination of three images, containing reflectance in the red, green, and blue wavelength bands. d Is a combination of three images, containing reflectance in the near infrared, red, and green wavelength bands.
c) Is a combination of three images, containing reflectance in the red, green, and blue wavelength bands.
A pseudo-colour image is created by combining three separate images, each capturing reflectance in specific wavelength bands. These bands correspond to the red, green, and blue regions of the electromagnetic spectrum. By combining these images, different colors are assigned to represent various properties or features of interest. This technique enhances the visual interpretation of data by simulating natural color and allowing us to observe and analyze specific characteristics such as vegetation density, soil moisture, and other variables associated with the captured reflectance data.
Learn more about electromagnetic spectrum here:
https://brainly.com/question/23727978
#SPJ11
Organizations that work in advocacy, community development, and national/global policies with respect to food systems work on the following issues: (choose all that apply, partial credit)
O Reducing Impacts on the environment and making food systems more efficient in their use of resources.
O Increasing the equality of access to food.
O Increasing the quality of diets across the food system.
O Allowing the farming sector to be financially successful as they adapt to sustainable production methods.
Organizations that work in advocacy, community development, and national/global policies with respect to food systems work on reducing impacts on the environment and making food systems more efficient in their use of resources, increasing the equality of access to food, and increasing the quality of diets across the food system.
Agricultural and food systems face an increasing number of sustainability challenges. The landscape is complex and solutions require involvement and collaboration of all stakeholders. Organizations that work in advocacy, community development, and national/global policies with respect to food systems are key in addressing these challenges.Some of the key issues these organizations work on include:Reducing impacts on the environment and making food systems more efficient in their use of resources.Increasing the equality of access to food.Increasing the quality of diets across the food system.Allowing the farming sector to be financially successful as they adapt to sustainable production methods. These issues are interdependent and require a holistic approach that includes policy, investment, and action across the entire food system.
For more information on sustainability challenges visit:
brainly.com/question/15384907
#SPJ11
Catalina Schist which formed some 30 miles in the ground now sits on top of the Palos Verdes peninsula.
O True O False
The statement "Catalina Schist, which formed some 30 miles in the ground, now sits on top of the Palos Verdes peninsula" is true. Schist is a type of rock that was formed from shale, mudstone, or other clay-rich rocks, as well as other minerals and elements that were subjected to high temperatures and pressure over time. It's named after the word "schiste" in French, which means "split."
It has a tendency to break into thin, flat slabs, making it ideal for use in construction. Catalina schist is a particular type of schist that is found on Santa Catalina Island as well as in other parts of California. This rock is approximately 500 million years old and was formed from metamorphic processes that occurred deep beneath the Earth's surface, up to 30 miles below the surface of the planet.
Today, Catalina schist can be found on the Palos Verdes Peninsula, which is located in southwestern Los Angeles County, California, on the coast of the Pacific Ocean. The peninsula is a prominent geological feature that juts out into the ocean with steep cliffs and rocky beaches.
The Catalina schist that is present on the peninsula was brought to the surface by tectonic processes and erosion over time. This rock is an important part of the geological history of the area and provides insight into the processes that have shaped the land over millions of years.
To learn more about the peninsula, visit:
https://brainly.com/question/18922018
#SPJ11
The best explanation for why some striped bass have high PCB levels is that
1) they take in water containing PCB’s
2) they directly absorb PCB’s from bottom sediments
3) PCB moves up the food chain
4) the fish are exposed to atmospheric PCB 9. A condition that might contribute to the greenhouse effect is 1) an increase in the rate of photosynthesis 2) a decrease in the rate of photosynthesis 3) an increase in reforestation 4) a decline in the use of fossil fuels.
The best explanation for why some striped bass have high PCB levels is that PCB moves up the food chain. The use of PCBs has been banned in the United States since 1979. However, the remnants of these chemicals are still present in the environment. PCBs are not easily biodegradable, and they are stored in the sediments of waterways.
Striped bass and other fish in these environments absorb PCBs as they feed on smaller fish.The answer is 3) PCB moves up the food chain.An increase in the rate of photosynthesis would help to decrease the greenhouse effect by consuming more carbon dioxide, which would result in lower atmospheric levels of carbon dioxide. A decrease in the rate of photosynthesis would increase atmospheric levels of carbon dioxide, contributing to the greenhouse effect. Reforestation is an effective method of reducing the greenhouse effect because trees absorb carbon dioxide during photosynthesis. Finally, a decrease in the use of fossil fuels would also reduce the greenhouse effect because burning fossil fuels releases carbon dioxide into the atmosphere. Therefore, the answer to the second question is 2) a decrease in the rate of photosynthesis.
For more information on food chain visit:
brainly.com/question/20647595
#SPJ11
Calculate the wind velocity of the wake (wind that passes the turbine) when annual wind power per m^2 is 332.6MW.
Here, friction and other factors that decrease wind energy during passing are assumed to be negligible except for energy conversion by the turbine.
Assuming that wind blows during a year at constant wind velocity, which is 3.5m/s, and temperature and pressure are 0 C and 1 atm, respectively.
The rotor power coefficient is 0.4.
The wind velocity of the wake is 6.7 m/s. Wind energy is a form of renewable energy that is generated by wind turbines.
These turbines capture the energy of wind and convert it into electricity. A wind turbine consists of rotor blades, a rotor hub, a nacelle, and a tower. The rotor blades are responsible for capturing the kinetic energy of the wind. The rotor hub is where the blades are attached. The nacelle contains the gear box and the generator. The tower supports the entire turbine. Wind turbines are typically installed in areas with high wind speeds.
In order to calculate the wind velocity of the wake (wind that passes the turbine) when annual wind power per m² is 332.6 MW, we need to use the following formula: Annual wind power = (1/2) x air density x swept area x wind velocity³ x power coefficient.
From the given values, we know that:
Annual wind power = 332.6 MW
Air density = 1.225 kg/m³(at 0 C and 1 atm)
Swept area = πr² (where r is the rotor radius)
Wind velocity = 3.5 m/s
Power coefficient = 0.4
Now we can substitute these values into the formula and solve for wind velocity: 332.6 x 10⁶ = (1/2) x 1.225 x πr² x 3.53 x 0.4
Wind velocity³ = 332.6 x 10⁶ / (1/2) x 1.225 x πr² x 3.53 x 0.4
Wind velocity = 6.7 m/s
Therefore, the wind velocity of the wake is 6.7 m/s.
Learn more about wind velocity here:
https://brainly.com/question/13302829
#SPJ11
"Over the years, the Jamaican government has done a tremendous job in managing the resources and protecting our marine ecosystem. The government has banned plastic bags and created several fish sanctuaries".
Do you agree with the statement given above? If yes justify, if no justify.
subject: Marine Pollution
Jamaica's government has demonstrated commendable efforts in preserving the country's marine ecosystem.
Measures such as the ban on plastic bags and creation of multiple fish sanctuaries are indicative of the pro-active approach the government has taken towards environmental conservation. The plastic bag ban, for instance, has curbed the number of non-biodegradable materials deposited in the ocean.
Additionally, the creation of fish sanctuaries facilitates the regeneration of fish populations and promotes sustainable fishing practices. Overall, these policies demonstrate the commitment of Jamaica's government towards the preservation of its rich natural heritage.
To know more about marine ecosystem visit:
https://brainly.com/question/28722666
#SPJ4
What is "Natural resources, environmental policy and climate
change" professional goals for the next five years?
Natural resources, environmental policy, and climate change is a broad field. Therefore, the professional goals for the next five years depend on the specific area of expertise. However, some common professional goals include reducing the carbon footprint, implementing sustainable development practices, and mitigating climate change impacts. Additionally, policies and regulations that address natural resources conservation, biodiversity, and environmental management will be a priority.
Natural resources, environmental policy, and climate change are interconnected fields that require a multi-faceted approach. The professional goals for the next five years include adopting sustainable development practices, reducing greenhouse gas emissions, mitigating the impacts of climate change, and promoting environmental stewardship. To achieve these goals, policymakers will have to work collaboratively with various stakeholders, including industries, communities, and governments, to ensure the implementation of effective policies and regulations that address these issues. Furthermore, education and awareness campaigns on the importance of natural resources and environmental conservation will be essential.
In conclusion, the professional goals for natural resources, environmental policy, and climate change over the next five years include reducing greenhouse gas emissions, adopting sustainable development practices, promoting environmental stewardship, and mitigating climate change impacts. Achieving these goals will require a multi-faceted approach that includes education and awareness campaigns, effective policy implementation, and collaborative efforts between stakeholders.
To know more about greenhouse gas visit:
https://brainly.com/question/30674591
#SPJ11
What are the changes you might have observed in the demographic
environment in Bangladesh for
the last ten years? Describe with examples.
Changes observed in the demographic environment of Bangladesh over the last ten years include population growth, urbanization, increased literacy rates, and changes in age structure.
For example, the population of Bangladesh has continued to increase, reaching approximately 170 million people in 2021. Rapid urbanization has been observed, with a significant rise in the number of people living in cities and towns. The literacy rate has improved, particularly among women, contributing to higher educational attainment. Additionally, there have been shifts in the age structure, with a growing youth population and a declining fertility rate. These changes have implications for social, economic, and healthcare systems in Bangladesh.
Learn more about demographic environment here;
https://brainly.com/question/18966495
#SPJ11
A scientist pours 1 liter of pure water into the ocean at a site near Greenland.
(a) How long (approximately) might be required for this water to become uniformly distributed over the entire global ocean, from the ocean surface to the seafloor? Would this be the same as the residence time? Explain in a few sentences.
(b) After the water has become uniformly distributed, another scientist collects 1 liter of water from the ocean at a point near Hawaii. How many molecules of water from the original liter (Greenland) would be present in the liter of water collected near Hawaii? [Useful fact: the volume of the world ocean is about 1.3109 km3]
Please answer both of the questions
(a) How long (approximately) might be required for this water to become uniformly distributed over the entire global ocean, from the ocean surface to the seafloor? Would this be the same as the residence time? Explain in a few sentences. Once pure water is poured into the ocean, it is distributed uniformly within a very short period of time, say a few hours.
However, the entire process of the movement of water through the ocean currents and mixing may take about 1000 years to complete the entire ocean basin. The time it takes for a substance to complete a cycle in the ocean is known as the residence time. The water cycle involves mixing and stratification, with stratification slowing down the mixing process. For this reason, residence times are calculated based on the area of the ocean being studied and vary depending on water depth. Therefore, the time taken for water to become uniformly distributed across the world's oceans is not the same as the residence time.
(b) After the water has become uniformly distributed, another scientist collects 1 liter of water from the ocean at a point near Hawaii. How many molecules of water from the original liter (Greenland) would be present in the liter of water collected near Hawaii? [Useful fact: the volume of the world ocean is about 1.3109 km3]The volume of the world ocean is 1.3 x 10^9 km^3. The volume of the ocean with a depth greater than 1 km (seafloor) is 3.1 x 10^8 km^3.The volume of the ocean surface layer is approximately 10% of the ocean’s volume, or about 1.3 x 10^8 km^3.1 L of water equals 0.001 km^3. Therefore, the fraction of Greenland's original water found in 1 L of water from Hawaii's surface waters is:Fraction = Volume of the water poured in Greenland that ended up in 1 L of water collected from Hawaii / Volume of the world oceanFraction = (0.001 km^3 / 1.3 x 10^8 km^3) = 7.7 x 10^-12
For more information on global ocean visit:
brainly.com/question/1178094
#SPJ11
In the spring, deer and elk browse on new shoots of certain tree species and avoid other species entirely. In some cases the browsers remove all individual trees of preferred species under a certain size class, stopping the regeneration of those species. This is a case of "selectivity" that no doubt influences succession.
(a) Describe two ways you can mitigate for browsers at a restored site.
(b) Come up with two other cases of selectivity that would be a factor in planning a restoration project.
Mitigation for browsers at a restored site: Two ways to mitigate browsers at a restored site include the use of exclusion fences and the use of deterrents. A fence can be installed around the perimeter of the site to keep deer and elk out, or smaller enclosures can be built around specific plants or trees to protect them from browsing. Deterrents are also used to discourage browsers from feeding on restored sites.
These may include scents, sounds, or motion-activated sprinklers. Other cases of selectivity in planning a restoration project: Two other cases of selectivity that would be factored in planning a restoration project are habitat and water availability. Selective herbivores may alter the habitat, and the presence of particular species, as well as water availability, have been demonstrated to influence the distribution and establishment of many species.
Selectivity by wildlife can lead to long-lasting effects; therefore, it is important to consider the ecological impacts of selectivity when planning restoration projects.
To know more about mitigation, visit:
https://brainly.com/question/30769457
#SPJ11
Re-write the following latitude and longitude coordinate so that the location would be east of the Prime Meridian: 41°22′30″N, 77°50′00″W.
To locate a coordinate east of the Prime Meridian, the latitude and longitude values need to be swapped. The revised coordinate for 41°22′30″N, 77°50′00″W would be 77°50′00″N, 41°22′30″W.
In the original coordinate, the latitude of 41°22′30″N indicates the distance north of the equator, while the longitude of 77°50′00″W represents the distance west of the Prime Meridian. By swapping the latitude and longitude values, the revised coordinate now shows a latitude of 77°50′00″N, indicating the distance north of the equator, and a longitude of 41°22′30″W, representing the distance west of the Prime Meridian. This places the location in the western hemisphere, specifically west of the Prime Meridian.
Learn more about Prime Meridian, here;
https://brainly.com/question/30538050
#SPJ11
Case Study 1:
Saijo Steps Up!
Saijo City, Japan includes education of twelve year olds in Disaster Risk Reduction since
2006. In 2011, the city government decided to expand the program to include high
school students in DRR education. In October 14, 2011, a lecture program on Disaster
Risk Reduction was given to young high school students as part of their International
Day for Disaster Risk Reduction celebrations. The objective of the lecture program is to
further the mutual help from the different stakeholders in Saijo City.
Saijo city believes that children are not bystanders but rather, are active participants in
disaster management. This point of view is from the city’s experience with previous
disasters which proved that during post-disaster events, children are not passive victims
of situations that have gone beyond their control.
The DRR program for the training of high schoolers is education on the kinds of
disasters that their city can experience, where it happens, the significance of social
networks, and what different members of the community can do. The education
program is rooted on the lessons gained from the previous disasters that Saijo City
survived such as floods and landslides.
Case Study 2:
Children as Contributors to Disaster Risk Reduction
The Center for Disaster Preparedness (CDP) located at CSWD, UP Diliman, developed a
toolkit to allow children to play an active role in disaster risk reduction. Children have
specific vulnerabilities and capacities that may not be addressed. The tools in the CDP’s
Child-Oriented Participatory Risk Assessment and Planning (COPRAP) enables children to
identify their needs, vulnerabilities, and capacities.The CORPAP was used in an action research in a flood-prone community. The methods used in the CORPAP includes drawing, role-playing, and interactive discussions that were able to draw out thoughts and views of children. Workshops were also held to for children to determine disaster-related factors relevant to their specific area such as elements at risk, safe and unsafe locations, appropriate responses before, during, and after a disaster, and other issues that threatens them. The inputs drawn from the children through CORPAP was then contributed to the Community-based Disaster Risk Reduction and Management. The community developed measures that are beneficial to the children and all the other members of the community. The CORPAP paved the way for local-level initiatives towards an integrated and sustainable approach to development.
Case Study 3:
Volunteer Responders, Helpers in Community Preparedness
The Federal Emergency Management Agency (FEMA) under the US Department of
Homeland Security has a program called Community Emergency Response Team
(CERT). The CERT program educates citizen volunteers about the hazards that they are
exposed to in their locality. The volunteers are also given trainings on basic emergency
response skills needed as rescuers. The skills gained by volunteers would be of great
assistance so that professional responders can prioritize on more complex tasks in case
there is a need for manpower during emergency response situations. The CERT
program is an opportunity for individuals and communities to strengthen their capacity
to cope and recover from disasters. Community Emergency Response Team as a program, has enough flexibility for specific communities to build their own teams and preparedness strategies. In fact, FEMA also provides a Community Preparedness Toolkit, a guide to starting a community-based disaster preparedness program based that is suited to their specific needs.
ESSENTIAL QUESTION: Based on the texts above, answer the following.
How can one mitigate the effects of a natural hazard?
The effects of a natural hazard can be mitigated through several methods. Below are some methods that can be used to mitigate the effects of natural hazards:1. Education and training: Education and training in disaster risk reduction (DRR) is a critical component of preparedness and response to natural hazards.
By educating citizens, especially children, on the risks associated with natural hazards, people can learn how to prepare and respond when a natural hazard strikes.2. Community-based disaster preparedness programs: Community-based disaster preparedness programs like the Community Emergency Response Team (CERT) program can help citizens to better prepare and respond to natural hazards. These programs provide training and resources to citizens, enabling them to respond more effectively during a disaster.3. Child-Oriented Participatory Risk Assessment and Planning (COPRAP): COPRAP is a toolkit developed by the Center for Disaster Preparedness (CDP) to help children identify their needs, vulnerabilities, and capacities in disaster risk reduction. Through drawing, role-playing, and interactive discussions, children can provide valuable insights into disaster-related factors that are relevant to their specific area.4. Social networks: Social networks are essential in mitigating the effects of natural hazards. They provide a means of communication and coordination between citizens and emergency responders during a disaster. By strengthening social networks, citizens can better prepare and respond to natural hazards.5. Flexible preparedness strategies: Community Emergency Response Team (CERT) program provides enough flexibility for specific communities to build their own teams and preparedness strategies. In fact, FEMA also provides a Community Preparedness Toolkit, a guide to starting a community-based disaster preparedness program based that is suited to their specific needs.
For more information on natural hazard visit:
brainly.com/question/13976318
#SPJ11
What are the issues to consider in the Depth of workings in
mines when comes to;
Bumps (why? Remedy? Case study?
A coal mine bump, also known as a bump, a mine bump, a mountain bump, or a rock explosion, is a seismic shock caused by the catastrophic collapse of one or more support pillars inside an underground mine.
An underground earthquake known as a coal mine bump causes significant earth movement. A coal mine's pillars, roofs, and walls could all come tumbling down, floors could be raised into the air, and people and equipment might be thrown around, all of which may result in death and disaster.
Rock and coal around a mine excavation can fail violently and quickly, causing coal mine bumps. Face and rib bumps are common in deep coal mines with powerful roof and floor rocks and significant levels of stress. The issue with the bumps is becoming worse as mining depth grows, attempts to reduce excessive stress are made before mining.
Major risks associated with underground coal mining exist in many places of the world due to coal bounces, bumps, and eruptions. These occurrences have the potential to seriously hurt mine workers. Production is always interrupted, and mine closure may be necessary. The intensity and frequency of bumps rise with depth, as is common knowledge. The weight of the layers above and the increased tension in the rock strata with depth are typically cited as the causes of this rise.
Learn more about Coal Mine here:
https://brainly.com/question/25245664
#SPJ4
Sun-synchronous orbits maintain the same sun angle over time.
O True
O False
False. Sun-synchronous orbits do not maintain the same sun angle over time.
A sun-synchronous orbit is a type of orbit used by satellites that allows them to pass over the same point on the Earth's surface at the same local time each day. These orbits are specifically designed so that the satellite maintains a consistent angle with respect to the sun, rather than the same sun angle over time. By adjusting the inclination and altitude of the orbit, satellites can achieve a desired sun angle, which is typically chosen to optimize the collection of data for specific purposes such as remote sensing or imaging. This synchronized alignment with the sun allows for consistent lighting conditions and facilitates the accurate observation and monitoring of the Earth's surface over extended periods of time. However, as the Earth's position in its orbit around the sun changes throughout the year, the sun angle in a sun-synchronous orbit will vary accordingly.
Learn more about sun-synchronous here
brainly.com/question/31954571
#SPJ11
Give one example (there may be more than one) of electromagnetic radiation that meets the following requirements: (a) Light that has a higher frequency than microwaves and a lower energy than x- rays. (b) A color that has a shorter wavelength than orange light and a lower frequency than blue light. (c) Light that has more energy than ultraviolet light but longer wavelengths than gamma rays.
Violet light is an example of electromagnetic radiation that meets the three requirements given.
The electromagnetic spectrum is composed of many forms of electromagnetic radiation. Electromagnetic radiation is characterized by its frequency and wavelength. The characteristics of light that has a higher frequency than microwaves and a lower energy than x-rays, a color that has a shorter wavelength than orange light, and a lower frequency than blue light, and light that has more energy than ultraviolet light but longer wavelengths than gamma rays are unique. One example of electromagnetic radiation that meets these requirements is the visible light spectrum.Violet light is an example of electromagnetic radiation that meets the three requirements given. Violet light is light with a wavelength of approximately 400–450 nm, which is shorter than orange light. It also has a higher frequency than microwaves but a lower energy than x-rays. Violet light has more energy than ultraviolet light but longer wavelengths than gamma rays.
To know more about electromagnetic visit:
brainly.com/question/23727978
#SPJ11
Which area leads the world in fracking recovery of oil and natural gas?
South America
Europe
Canada
Middle East
United States
The United States leads the world in fracking recovery of oil and natural gas. The development of hydraulic fracturing, commonly known as fracking, has revolutionized the energy industry in the United States, leading to a significant increase in domestic oil and natural gas production. This technique involves injecting high-pressure fluid into shale formations to extract hydrocarbons trapped in the rock.
The United States has abundant shale resources, particularly in regions such as the Bakken Formation in North Dakota, the Marcellus Formation in the northeastern states, and the Permian Basin in Texas and New Mexico. These shale formations hold vast reserves of oil and natural gas, and the application of fracking technology has enabled their extraction on a large scale.
The U.S. fracking industry has experienced significant growth over the past decade, contributing to the country's energy independence and driving down energy prices. The extraction of shale oil and gas through fracking has transformed the global energy landscape and has had a substantial impact on international markets.
While other countries, such as Canada and certain regions in Europe, have also pursued fracking to extract oil and natural gas, the United States has been at the forefront of this technology's development and application. The combination of favorable geology, advanced drilling techniques, and a well-established oil and gas infrastructure has positioned the United States as the leader in fracking recovery of oil and natural gas worldwide.
To know more about Industry visit-
brainly.com/question/23961745
#SPJ11
1- Discuss briefly types of stresses surrounding an
Anticline
2-Discuss briefly types of stresses surrounding inverse
(compression) fault
1- Types of stresses surrounding an Anticline. The geological structure that results from the upward folding of rock layers is referred to as an anticline. The anticline structure is formed when rock layers bend upwards into a crest. This structure is subjected to various types of stresses. These stresses are as follows:
Compression stress- It's the stress that causes the folding of rock layers in the first place. This stress is caused by the Earth's internal forces.
Tensile stress- The upper surface of the anticline is subject to tensile stress. Tensile stress is caused by the stretching of the rock.
Shear stress- When two adjacent rock layers are moving in opposite directions, the shear stress is applied. This stress causes the horizontal movement of the rock layers.
2- Types of stresses surrounding inverse (compression) fault Inverse faulting, also known as reverse faulting, is a type of faulting in which rocks break and slide against each other, resulting in the vertical displacement of the ground surface. The following types of stresses surround inverse/compression fault:Compression stress- It's the stress that causes the rocks to be broken and the rock layers to be pushed upwards. This stress is caused by the Earth's internal forces.Tensile stress- The rock layers above the fault plane are subject to tensile stress. This stress is caused by the stretching of the rock.Shearing stress- Shearing stress is created when the footwall slides horizontally beneath the hanging wall. This stress causes the horizontal movement of the rock layers.
1- The Anticline structure is subjected to three types of stresses, namely Compression, Tensile, and Shear.
2- The inverse (compression) fault is subjected to Compression, Tensile, and Shearing stresses.
The Anticline structure is a geological structure that results from the upward folding of rock layers. It is subject to Compression, Tensile, and Shear stresses. Compression stress is responsible for the formation of the anticline structure. Tensile stress affects the upper surface of the anticline structure. Shear stress causes horizontal movement of the rock layers. Inverse (compression) fault, on the other hand, is caused by rocks breaking and sliding against each other, resulting in vertical displacement of the ground surface. The fault is subject to Compression, Tensile, and Shearing stresses. Compression stress causes rocks to break and the rock layers to be pushed upwards. Tensile stress affects the rock layers above the fault plane, and shearing stress causes horizontal movement of the rock layers.
Anticline structures and inverse faults are both geological structures that are subject to different types of stresses. Compression, Tensile, and Shear stresses are the three types of stresses that affect the Anticline structure, while Compression, Tensile, and Shearing stresses are the three types of stresses that affect the inverse fault.
To know more about tensile stress visit:
https://brainly.com/question/32563204
#SPJ11
the atmospheric homosphere consists of the . a. ionosphere, troposphere, and exosphere b. mesosphere, thermosphere, and exosphere c. troposphere, stratosphere, and mesosphere d. all of the above e. none of the above
The atmospheric homosphere consists of the troposphere, stratosphere, and mesosphere. Therefore, the correct option among the given alternatives is c. troposphere, stratosphere, and mesosphere.
The homosphere is the layer of the Earth's atmosphere that extends from the surface to roughly 50 to 80 kilometers (31 to 50 miles) in altitude. It's also known as the lower atmosphere. The Homosphere, which is composed of the troposphere, stratosphere, and mesosphere, is an area of the atmosphere where the composition of gases is constant throughout the height of the layer. These layers are distinguished by variations in temperature that cause the chemical composition to change
The layer of the atmosphere closest to Earth's surface is known as the troposphere. It extends up to 10-15 kilometers (6-10 miles) above the Earth's surface and is primarily composed of nitrogen (78 percent) and oxygen (21 percent). Other gases, such as carbon dioxide, helium, argon, and neon, make up the remaining 1% of the atmosphere. Almost all of the Earth's weather happens in the troposphere
Ozone, which absorbs ultraviolet radiation from the Sun, is abundant in the stratosphere. The temperature in this layer rises as altitude increases.
The mesosphere is the coldest layer of the Earth's atmosphere, lying above the stratosphere and extending up to about 85 kilometers (53 miles) above the Earth's surface. The temperature in the mesosphere decreases with altitude. The mesosphere is located above the stratosphere and below the thermosphere. The mesosphere is the layer of the atmosphere where meteors burn up when they enter the Earth's atmosphere.
to know more about Ozone visit :
https://brainly.com/question/29795386
#SPJ11
The time dilation, length contraction and mass-energy are addressed in
O Special Relativity.
O Olbers's paradox.
O the Cosmological principle.
O General Relativity.
O Steady State Physics.
Special Relativity describes time dilation, length contraction, and mass-energy. Einstein introduced special relativity in 1905, and it contains two primary postulates.1. The laws of physics are the same in all inertial reference frames.2. The speed of light in a vacuum is constant, independent of the observer's motion or the source's motion.
The effects of time dilation, length contraction, and mass-energy have been experimentally verified many times since their discovery. Time dilation occurs when an object moves at a high speed, and time passes more slowly for that object than it does for stationary objects. The faster an object moves, the slower time passes for it.Length contraction is a similar effect, which occurs when an object moves at a high speed. It appears to be shorter than it would if it were stationary. As a result, an object appears to be elongated in the direction of motion.Mass-energy equivalence is another essential concept in special relativity. E=mc² is the most well-known formula, and it states that mass and energy are equivalent. It indicates that mass and energy are two manifestations of the same thing. Energy can be converted into mass, and mass can be converted into energy.Thus, Special Relativity describes time dilation, length contraction, and mass-energy.
For more information on Einstein visit:
brainly.com/question/12962864
#SPJ11
The region in our eye with a high concentration of cone cells is called ... a Fovea b Cornea c Blind spot d Vitreous humor
The region in our eye with a high concentration of cone cells is called the "Fovea." The fovea is a small, central pit located in the retina of the eye.
It is responsible for providing the sharpest and most detailed vision. The fovea contains a high density of cone cells, which are specialized photoreceptor cells responsible for color vision and high visual acuity. The cones in the fovea are densely packed and enable us to see fine details and perceive colors accurately. Surrounding the fovea, there are fewer cones and a higher proportion of rod cells, which are more sensitive to low light levels but less effective at discerning fine details. The fovea plays a critical role in our central vision and is responsible for our ability to read, recognize faces, and focus on specific objects.
Learn more about Fovea here;
https://brainly.com/question/12192699
#SPJ11
the vast majority of all seismic energy occurs in what type of plate boundary
Seismic energy is the amount of energy released by an earthquake that radiates from the earthquake source in the form of waves. The vast majority of all seismic energy occurs in a type of plate boundary called the divergent plate boundary.
A divergent plate boundary is where two tectonic plates move apart, resulting in the formation of a new oceanic crust. As the two plates separate, a gap is created, and magma from the mantle rises to fill the void. This magma cools and solidifies, forming new oceanic crust.
Divergent boundaries can be found on the ocean floor and can cause submarine volcanic eruptions.When there is movement or displacement of the two plates, seismic waves are produced and the energy generated travels through the crust and can be detected on the surface by sensitive instruments known as seismographs.
Therefore, it can be concluded that the vast majority of all seismic energy occurs in the divergent plate boundary.
To know more about earthquake visit :
brainly.com/question/31641696
#SPJ11
approximately how far below the earth's surface is the interface between the mantle and outer core
Approximately 2,900 kilometers far below the earth's surface is the interface between the mantle and outer core.
The interface between the mantle and outer core is located at an approximate depth of 2,900 kilometers below the Earth's surface. The Earth's interior is divided into several layers, including the crust, mantle, outer core, and inner core. The mantle is the layer beneath the crust, and it extends down to a depth of about 2,900 kilometers. Below the mantle is the outer core, which marks the boundary between the solid mantle and the liquid outer core. The precise depth can vary slightly depending on location, but 2,900 kilometers provides a general estimate for the depth of this interface.
learn more about:- earth's surface here
https://brainly.com/question/30573187
#SPJ11
Briefly compare and contrast the arts of two of the major
indigenous American civilizations.
The art forms of the Indigenous American Civilizations are of significant value as it showcases their way of life and societal values. This answer will briefly compare and contrast the arts of two major Indigenous American Civilizations which are the Maya and Aztec civilization. Maya Civilization The Maya Civilization was developed in South America, and it is regarded as one of the most cultured pre-Colombian societies in the Americas.
It is known for its highly skilled artistic creation, architecture, advanced writing systems, astronomical knowledge, and mathematical system. The artwork of the Maya civilization is a fusion of religion, mythology, and history, which was expressed through painting, sculpture, and architecture. The Maya Civilization produced some of the most impressive pyramids and temples in the world. The art of the Maya civilization is distinctive because it focused on mythology and religion, such as sacred rituals, religious ceremonies, and other important events. Their artwork emphasized the importance of symbols such as snakes, jaguars, and eagles, and the use of various colors to depict the different shades of day and night.
Aztec CivilizationThe Aztec Civilization was situated in Central America, and it was one of the greatest civilizations in the Americas. The Aztecs are known for their artistic designs, sculptures, architecture, and pottery. Their artwork was closely associated with their religious beliefs, mythology, and daily life. The Aztec Civilization produced the Tenochtitlan, which was the capital of their empire, a city filled with temples, palaces, and marketplaces. The art of the Aztec Civilization was unique because it portrayed religious themes and deities. Their artwork focused on themes such as human sacrifice, warfare, and the natural world.
To know more about Aztec Civilization visit:
https://brainly.com/question/13733870
#SPJ11
What is the maximum specific humidity for an air parcel with a temperature of 15 degrees Celsius?
a. 1.8 g/kg
b. 5.4 g/kg
c. 10.6 g/kg
d. 20.0 g/kg
The maximum specific humidity for an air parcel with a temperature of 15 degrees Celsius is 10.6 g/kg.
What is specific humidity?
Specific humidity is defined as the mass of water vapor in a given mass of air. Specific humidity is expressed in terms of grams of water vapor per kilogram of air content loaded. It is one of the significant measures of humidity, along with relative humidity and absolute humidity.
How do I calculate the specific humidity of an air parcel?
Specific humidity is calculated as follows: SH = (mass of water vapor) / (total mass of air parcel)Specific humidity, or SH, is the ratio of the mass of water vapor (in grams) to the total mass of the air parcel (in kilograms). When the parcel of air is saturated,
What is its maximum specific humidity?
When a parcel of air is saturated, its maximum specific humidity is determined by its temperature. The maximum specific humidity for an air parcel with a temperature of 15 degrees Celsius is 10.6 g/kg,
which is an option (c).Explanation: We are given the temperature, which is 15 degrees Celsius. The maximum specific humidity for an air parcel with a temperature of 15 degrees Celsius is 10.6 g/kg.
Option (a) is incorrect because it is less than the maximum specific humidity of air at a temperature of 15 degrees Celsius.
Option (b) is incorrect because it is less than the maximum specific humidity of air at a temperature of 15 degrees Celsius.
Option (d) is incorrect because it is greater than the maximum specific humidity of air at a temperature of 15 degrees Celsius.
To know more about humidity visit :
https://brainly.com/question/22069910
#SPJ11
The Sun is considered to be a low-mass star. Why is a low-mass
star more favorable in hosting planets that are habitable?
Is the Sun as calm and quite as you expected or not? What are
some of the cons
The Sun is considered to be a low-mass star. A low-mass star is more favorable in hosting planets that are habitable because of the following reasons: Such stars last much longer than higher mass stars, meaning they are stable for a long time and therefore allow any life that exists in any orbiting planets the time to evolve and adapt.
Low-mass stars are less bright and luminous, so their habitable zones are much closer to them, and planets need to orbit them at a close range to have suitable temperatures for liquid water to exist. Planets in these orbits would be more likely to be tidally locked, meaning that one side would always face the star and the other side would always be in darkness, but that wouldn't necessarily make it inhospitable. What are some of the cons?The sun is not as calm and quiet as expected. It occasionally experiences solar storms that release coronal mass ejections (CMEs) which can impact Earth and other planets in the solar system, causing damage to satellites, communication systems, and power grids. These events are unpredictable, which makes it difficult to prepare for them. In addition, the sun's activity also causes changes in the Earth's magnetic field, which can have effects on weather patterns and climate.
For more information on Sun visit:
brainly.com/question/31998244
#SPJ11
1a. What happened to summer temperatures in the 1980’s?
1b. What then happened to summer temperatures in the 1990’s?
1c. What has happened to summer temperatures from 2005 to
now?
Summer temperatures in the 1980s experienced a significant increase. These rising temperatures had various impacts on ecosystems, weather patterns, and human health, emphasizing the need for proactive measures to mitigate climate change.
During the 1980s, summer temperatures witnessed a notable rise. This warming trend was a part of the overall global climate change phenomenon that has been observed over the past century. Several factors contributed to the temperature increase, including the release of greenhouse gases, such as carbon dioxide, from human activities like the burning of fossil fuels. The 1980s marked a period of accelerated industrialization and increased energy consumption, leading to higher emissions.
Throughout the 1980s, summer temperatures experienced an upward trajectory, reflecting the global warming trend. Scientific data indicates that the average global temperature increased by approximately 0.4°C (0.7°F) during that decade. This rise in temperature can be attributed to the enhanced greenhouse effect caused by human activities, primarily the burning of fossil fuels. The emission of greenhouse gases traps more heat in the atmosphere, leading to a gradual warming of the Earth's surface. The 1980s were marked by growing concerns about climate change, which prompted increased research and monitoring efforts to understand and address the issue. The observed temperature increase in the 1980s acted as a precursor to subsequent climate change discussions and initiatives in the following decades.
Learn more about global warming here
brainly.com/question/3553382
#SPJ11
explain how a seismic tsunami forms, what is required? what are characteristics of the wave in the open ocean and how does that change (in terms of speed and height) as it approached the shore .
A seismic tsunami is formed by the sudden movement of the Earth's crust, which triggers a series of large ocean waves. This movement can be caused by several different events, such as earthquakes, volcanic eruptions, or landslides.
The energy from these events is transferred to the water and causes the water to move, creating a tsunami.In order for a seismic tsunami to form, three main things are required:1. A disturbance in the Earth's crust2. The disturbance must be large enough to transfer energy to the water3.
The water must be deep enough to allow for the creation of large waves.The characteristics of a tsunami wave in the open ocean are that it has a very long wavelength and a relatively small wave height. This means that in the open ocean, the wave may not be easily seen or felt by ships or other vessels.
However, as the wave approaches the shore, its speed slows down due to the decrease in water depth, and the wave height increases.In terms of speed, the wave travels very quickly in the open ocean, often reaching speeds of over 500 miles per hour. As it approaches the shore, the wave slows down significantly due to the decrease in water depth. This decrease in speed can cause the wave height to increase dramatically, resulting in a much larger and more destructive wave.
As the wave approaches the shore, it begins to "feel" the bottom of the ocean, and the wave's shape becomes compressed. This causes the wave height to increase, sometimes to several meters or more. The wave then crashes onto the shore, causing widespread damage and destruction.Content loaded:
To know more about seismic tsunami visit:
https://brainly.com/question/2857778
#SPJ11