Explanation:
arctan ( -7.55/7.14) = - 46.6 degrees ( or 313.4 degrees)
The 2001 World Trade Center attacks fall under which category of terrorism?
foreign-sponsored terrorism on U.S. soil
domestic-sponsored terrorism on U.S. soil
cyberwarfare and domestic terrorism
terrorism abroad that affects U.S. citizens
The 2001 World Trade Center attacks fall under which category of terrorism (a).foreign-sponsored terrorism on U.S. soil is correct option.
The 2001 World Trade Center attacks are generally considered to be an example of foreign-sponsored terrorism on U.S. soil. The attacks were carried out by a terrorist organization based in Afghanistan called Al-Qaeda, which was led by Osama bin Laden. The attackers were primarily from Saudi Arabia, but they received training and support from Al-Qaeda operatives based in Afghanistan.
Therefore, the correct option is (a).
To know more about terrorism
https://brainly.com/question/29830276
#SPJ1
A 1.3 kg mass is attached to the left end of a meter stick. The meter stick is then balanced on a fulcrum as shown. If the mass of the meter stick is 0.2 kg and its center of mass is located at its geometric center, how far to the left of the stick's center of mass (‘d' in the figure) should the fulcrum be placed to balance the meter stick? Provide your answer in centimeters.
The fulcrum to balance the meter stick should be placed 8.33 cm to the left of the center of mass of the meter stick, under the condition that the mass of the meter stick is 0.2 kg and its center of mass is located at its geometric center.
In order to balance the meter stick with the 1.3 kg mass placed to the left end, we have to evaluate the distance ‘d' from the center of mass of the meter stick to the fulcrum.
The given center of mass of the meter stick is found at its geometric center which is at 50 cm from either end of the stick. Then the mass of the meter stick is 0.2 kg.
We can apply the principle of moments to evaluate this problem. The principle of moments says that for an object in equilibrium, the summation of the clockwise moments about any point must be equivalent to the sum of the anticlockwise moments about that point.
Let us consider that moments about the fulcrum. The clockwise moment because of the weight of the 1.3 kg mass and is stated by (1.3 kg) x (d cm). The anticlockwise moment is because of the weight of the meter stick and is given by (0.2 kg) x (50 - d cm). Since the meter stick is balanced, these two moments should be equal.
(1.3 kg) x (d cm)
= (0.2 kg) x (50 - d cm)
Evaluating for‘d’,
d = 8.33 cm
Hence, the fulcrum should be placed 8.33 cm to the left of the center of mass of the meter stick.
To learn more about principle of moments
https://brainly.com/question/26117248
#SPJ1
graph
shows a variety of moving objects and how their distance is related to time what do these objects have in common
What is common among all the graphs is that they all show an object that is moving.
What is a graph?In the distance time graph, we have the distance on the vertical axis and we have the time on the horizontal axis and the shape of the plots may differ depending on the nature of the motion of the objects.
Graphs of distance vs time help us to examine motion by showing how an object has moved over time. All objects shown on a distance vs. time graph are shifting positions over time, regardless of the graph's specific shape or slope, and the graph reveals information about the direction and speed of their motion.
Learn more about graphs:https://brainly.com/question/848468
#SPJ1
What is a hydrogen displacement?
A chemical process known as hydrogen displacement occurs when hydrogen gas is replaced or displaced by another element or molecule.
It results from a number of reactions, most of which involve a reactive metal or substance. A metal reacting with an acid can displace hydrogen atoms of the acid, resulting in the formation of a salt and the release of hydrogen gas as an example.
Another example is the interaction of a metal with water molecules, which displaces hydrogen atoms and results in the formation of metal hydroxide and hydrogen gas. Chemistry studies hydrogen displacement reactions in great detail because they are important for understanding the reactivity of various compounds. They shed light on the behavior of elements, how well they can replace hydrogen, and how new compounds are formed.
Learn more about hydrogen displacement, here:
https://brainly.com/question/20344192
#SPJ5
A blue train of mass 50 kg moves at 4 m/s toward a green train of 30 kg initially at rest. The trains collide. After the collision the green train moves with a speed of 3 m/s. What is the final momentum of the blue train?
A. 200 kgm/s
B. 20 kgm/s
C. 110 kgm/s
D. 90 kgm/s
Answer:
C. 110 kgm/s
Explanation:
Law of Conservation of Momentum states that total momentum before the collision must equal total momentum after the collision.
Momentum = p = mv
x = final velocity of the blue train
(50 kg)(4 m/s) + (30 kg)(0 m/s) = (50 kg)(x) + (30 kg)( 3 m/s)
200 kg·m/s + 0 = (50 kg)(x) + 90 kg·m/s
50 kg(x) = 110 kg·m/s
x = (110 kg·m/s)/(50 kg) = 2.2 m/s
p-final (blue train) = (50 kg)(2.2 m/s) = 110 kg·m/s
Answer:
According to the law of conservation of momentum, the total momentum of the system before and after the interaction must be equal.
The total initial momentum of the system is:
P_initial = 50 * 4 + 30* 0 = 200kgm/s
The total final momentum of the system
let the velocity of the blue train is=v
P_final = 30* 3 + 50* v = 200
after solving v=2.2m/sec
the momentum of blue train will be= 50* 2.2=110kgm/s
A moving object of mass 0.01 kg experiences a drag force proportional to its speed square. The proportionality constant is C. If the object has an initial speed v = 10 m/s and after time T has energy 1/8 m v^2, then find C.
The proportionality constant of the moving object experiencing a drag force is 0.01875 Ns²/m².
How to calculate proportionality constant?The work-energy principle states that the work done on an object is equal to its change in kinetic energy. So, the work done by the drag force can be found as follows:
W = (1/8)mv² - (1/2)mv₀²
where m = mass of the object, v = final speed, and v₀ = initial speed.
The work done by the drag force is also given by the formula:
W = ∫F(x)dx
where F(x) = force function and x = position of the object.
In this case, the force function is F(x) = -Cv², since the drag force is in the opposite direction of motion. So:
W = ∫-Cv²dx
Since the force is proportional to v², rewrite this as:
W = -C∫v²dx
Integrating both sides with respect to x:
W = -(1/3)Cv³
So, equating the two expressions for W:
(1/8)mv² - (1/2)mv₀² = -(1/3)Cv³
Substituting m = 0.01 kg, v₀ = 10 m/s, and solving for C:
C = -(3/8) × (m/v₀³) × (v² - v₀²) = -(3/8) × (0.01/10³) × (1/8 × 10² - 10²) = 0.01875 Ns²/m²
Therefore, the proportionality constant is C = 0.01875 Ns²/m².
Find out more on proportionality constant here: https://brainly.com/question/24868934
#SPJ1
Toy cars of different masses accelerate as they move down a ramp as shown in the figure. A motion sensor is used to measure the speed of each car. It is found that all of the cars have the same speed at the bottom of the ramp. This graph shows how the mass of the car affects the car’s kinetic energy at the bottom of the ramp. Based on the graph, describe the relationship between the mass and the kinetic energy of the car, and then predict, in joules the kinetic energy of a car with a mass of 80 grams.
The Kinetic energy of the car with a mass of 80 grams is 0.40 joules
How do i determine the kinetic energy?From the graph given, we can see that the as the mass increase, the kinetic energy also increase. Thus, we can say that the kinetic energy and mass of the car are in direct proportionality.
Now, we shall obtain the velocity of the car. Details below:
Kinetic energy (KE) = 0.1 JMass of (m) = 20 g = 20 / 1000 = 0.02 KgVelocity (v) = ?KE = ½mv²
0.1 = ½ × 0.02 × v²
0.1 = 0.01 × v²
Divide both side by 0.01
v² = 0.1 / 0.01
Take the square root of both side
v = √(0.1 / 0.01)
v = 3.16 m/s
Finally, we shall determine the kinetic energy of the car of mass 80 grams. Details below:
Mass (m) = 80 g = 80 / 1000 = 0.08 KgVelocity (v) = 3.16 m/sKinetic energy (KE) =?KE = ½mv²
KE = ½ × 0.08 × 3.16²
Kinetic energy = 0.40 joules
Learn more about kinetic energy:
https://brainly.com/question/25959744
#SPJ1
A satellite is in orbit around a planet. The orbital radius is 34 km and the gravitational acceleration at that height is 3.3 ms-2 . What is the satellite's orbital speed in m/s?
The orbital speed of the satellite orbiting around a planet of radius 34 Km is found to be 2.59 km/s.
To find the orbital speed (v) of the satellite, we can use the formula,
v = √(GM/r), gravitational constant (6.674 x 10⁻¹¹ N(m/kg)²) is G, mass of the planet is M, and orbital radius of the satellite is r. To calculate M, we can use the formula,
g = GM/r², rearranging this formula, we get,
M = gr²/G
Substituting the values, we get,
M = 3.3(34,000)²/(6.674 x 10⁻¹¹)
M = 6.06 x 10²⁰ kg
Now, substituting the values of G, M, and r into the formula for orbital speed, we get,
v = √((6.674 x 10⁻¹¹)(6.06 x 10²⁰)/(34,000))
v = 2.59 x 10³ m/s
Therefore, the satellite's orbital speed is approximately 2.59 km/s.
To know more about orbital speed, visit,
https://brainly.com/question/7260440
#SPJ1
The softest sound a human ear can hear is at 0 dB (Io = 10-12 W/m2). Sounds above 130 dB cause pain. A particular student's eardrum has an area of A = 51 mm2. What is the most power, in watts, the ear can receive before the listener feels pain?
Im so confused on how to even start with this problem, my main question is how sound and power are related.
Answer:
Sound and power are related through intensity, which is the amount of power per unit area. The intensity of a sound wave is proportional to the square of its amplitude, which is a measure of how far the wave oscillates from its equilibrium position.
To solve this problem, you can use the formula for sound intensity:
I = P/A
where I is the intensity of the sound wave in watts per square meter (W/m^2), P is the power of the sound wave in watts (W), and A is the area of the eardrum in square meters (m^2).
You are given that the softest sound a human ear can hear is 0 dB, which corresponds to an intensity of 10^-12 W/m^2. You are also given that sounds above 130 dB cause pain. To find the maximum power the ear can receive before the listener feels pain, you can rearrange the formula for intensity to solve for power:
P = AI
where A is the area of the eardrum in square meters.
Substituting the given values, you get:
P = (51 x 10^-6 m^2)(10^-12 W/m^2 x 10^(130/10))
Simplifying this expression, you get:
P = 1.8 x 10^-3 W
Therefore, the most power the ear can receive before the listener feels pain is 1.8 x 10^-3 watts.
A proton, moving with a velocity of viî, collides elastically with another proton that is initially at rest. If the speed of the initially moving proton is 1.90 times the speed of the initially at rest proton, find the following.
(a) the speed of each proton after the collision in terms of vi
(b) the direction of the velocity vectors after the collision
Answer:
We can approach this problem using the conservation of momentum and the conservation of kinetic energy.
Conservation of momentum:
The momentum before the collision is given by:
p1 = m1v1 = m1viî
where m1 is the mass of each proton (which we assume to be the same) and v1 is the velocity of the initially moving proton.
The momentum after the collision is given by:
p2 = m1v1' + m1v2'
where v1' and v2' are the velocities of the two protons after the collision.
Since the collision is elastic, the total momentum is conserved:
p1 = p2
m1viî = m1v1' + m1v2'
We can simplify this equation by dividing both sides by m1:
viî = v1' + v2'
Conservation of kinetic energy:
The kinetic energy before the collision is given by:
K1 = (1/2)m1 We need the value of the velocity v1, which is not given in the problem statement.
A vehicle is being planned that is driven by a flywheel engine. It has to run for at least 30 minutes and develop a steady power of 500 W.
Answer:
To meet the requirements of running for at least 30 minutes and developing a steady power of 500W, the flywheel engine needs to have sufficient energy storage capacity and be capable of delivering a steady power output.
Assuming that the flywheel engine is 100% efficient (i.e., no energy losses due to friction, air resistance, or other factors), the energy storage capacity required can be calculated as follows:
Energy storage capacity = Power x Time
= 500W x 30min
= 15,000 watt-minutes or 250 watt-hours
This means that the flywheel engine needs to be capable of storing at least 250 watt-hours of mechanical energy.
3-Calculate the total electric current of this circuit:
( ) 10.2 A
( ) 3.45 A
( ) 5.5 A
( ) 7.5 A
Answer :
7.5 A is the required electric currentStep-by-step explanation:
We are given with 4 resistors which are connected in parallel.
Let
R_1 =10Ω
R_2 = 12Ω
R_3 = 15Ω
R_4 = 20 Ω
First let's calculate the total resistance.
Since the resistors are connected in parallel, Total resistance will be,
[tex]{\boxed{ \implies {\sf {\dfrac{1}{R_{(total)} }= \dfrac{1}{R_1} + \dfrac{1}{R_2} + \dfrac{1}{R_3} + \dfrac{1}{R_4}}}}} \\ [/tex]
Plugging in the required values,
[tex]\implies \sf \dfrac{1}{R_{(total)}} = \dfrac{1}{10} + \dfrac{1}{12} + \dfrac{1}{15} + \dfrac{1}{20} \\ \\\implies \sf \dfrac{1}{R_{(total)}} = \dfrac{6 + 5 + 4 + 3}{60} \\ \\ \implies \sf \dfrac{1}{R_{(total)}} = \frac{18}{60} \\ \\ \implies \sf R_{(total)} = \frac{60}{18} \\ \\ \implies \sf R_{(total)} = 3.33 [/tex]
Hence, The total resistance is 3.33 Ω
Now,
[tex] \implies \sf I = \dfrac{V}{R}[/tex]
Where,
I is currentR is resistanceV is voltagePlugging the required values
[tex] \implies[/tex] I = 25/3.33
[tex] \implies[/tex] I = 7.5 A
Therefore, The total current in the circuit is 7.5 A
Answer:10.2
Explanation:
state in terms of m, u and v ,the change of momentum of the object
The change in momentum of the object in terms of its mass, initial velocity, and final velocity is 5 kg m/s.
The change in momentum of an object can be calculated using the formula:
Δp = m * (v - u)
In this case, the mass of the object is 0.5 kg, the initial velocity (u) is 0 m/s, and the final velocity (v) is 10 m/s after 3 seconds of uniform acceleration.
Substituting these values into the formula gives:
Δp = 0.5 kg * (10 m/s - 0 m/s)
Δp = 5 kg m/s
Therefore, the change in momentum of the object in terms of its mass, initial velocity, and final velocity is 5 kg m/s.
To know more about momentum, here
brainly.com/question/30487676
#SPJ1
--The complete Question is, A 0.5 kg object is initially at rest. It then accelerates uniformly for 3 seconds and reaches a velocity of 10 m/s. Calculate the change in momentum of the object in terms of its mass (m), initial velocity (u), and final velocity (v).--
Two children setup a “telephone” by placing a long, slender aluminum (Y = 6.9 × 1010 N/m2) rod that has a length of 6.1-m between their two houses. To communicate, a child taps a coded message on one end. How long do the sound waves take to reach the other end? Note: the density of aluminum is 2700 kg/m3.
The time takes is 1.19 ms for the sound waves to travel the length of the aluminum rod between the two houses.
The speed of sound in aluminum can be determined utilizing the condition
v = sqrt(Y/ρ),
where Y is the Youthful's modulus and ρ is the thickness of the material. Connecting the qualities for aluminum, we get
v = [tex]sqrt(6.9x10^10 N/m^2/2700 kg/m^3) = 5110 m/s[/tex].
The time it takes for the sound waves to venture to every part of the length of the aluminum pole can be determined utilizing the condition
t = d/v,
where d is the distance and v is the speed of sound. Connecting the qualities, we get
t = 6.1 m/5110 m/s = 0.00119 s or 1.19 ms.
Subsequently, it takes 1.19 ms for the sound waves to venture to every part of the length of the aluminum bar between the two houses.
To learn more about time of sound wave, refer:
https://brainly.com/question/14615403
#SPJ1
Simple machines make work easier. You must left a move this load of Saul for your parents. It is heavy you’re using to simple machines when you use this wheel barrow wight simple machine included in the wheelbarrow makes it easier to move the song from one place to another.
The use of the wheel barrow in this case makes it a simple machine
What is the simple machine?A wheelbarrow is an illustration of a straightforward device that can simplify labour by lowering the force needed to move a large load. The wheel and axle and the lever are two basic machines that are used.
The wheelbarrow's wheel is made of an axle and wheel. The friction between the wheel and the ground is decreased by the wheel's rotation around the axle. It can also be seen as one of the classes of the lever.
Learn more about simple machine:https://brainly.com/question/10075890
#SPJ1
You are a visitor aboard the New International Space Station, which is in a circular orbit around the Earth with an orbital speed of o=2.45 km/s
. The station is equipped with a high velocity projectile launcher, which can be used to launch small projectiles in various directions at high speeds. Most of the time, the projectiles either enter new orbits around the Earth or eventually fall down and hit the Earth. However, as you know from your physics courses at the Academy, projectiles launched with a sufficiently great initial speed can travel away from the Earth indefinitely, always slowing down but never falling back to Earth.
With what minimum total speed, relative to the Earth, would projectiles need to be launched from the station in order to "escape" in this way? For reference, recall that the radius of the Earth is E=6370000 m
, the mass of the Earth is E=5.98×1024 kg
, the acceleration due to gravity on the surface of the Earth is =9.81 m/s2
and the universal gravitational constant is =6.67×10−11 N·m2/kg2
.
Answer:
To calculate the minimum total speed required for the projectile to escape the Earth's gravitational pull, we can use the equation for escape velocity:
v_escape = sqrt(2GM/R)
where G is the gravitational constant, M is the mass of the Earth, and R is the radius of the Earth.
Plugging in the given values, we get:
v_escape = sqrt(26.67e-115.98e24/6370000)
v_escape = 11186.4 m/s
This is the minimum total speed required for the projectile to escape the Earth's gravitational pull. In order to achieve this speed, the projectile would need to be launched with a velocity of 11186.4 m/s relative to the Earth.
Explanation:
78. A rocket takes off from Earth and reaches a speed of 100 m/s in 10.0 s. If the exhaust
speed is 1500 m/s and the mass of fuel burned is 100 kg, what was the initial mass of the rocket?
Answer:
5866.9 kg
Explanation:
We can use the conservation of momentum to solve this problem. The momentum of the rocket and fuel system is conserved, so:
Initial momentum = Final momentum
The initial momentum of the system is zero since the rocket is at rest initially. The final momentum is the momentum of the rocket after burning the fuel. We can find the final momentum using the rocket equation:
Δv = ve * ln(m0 / mf)
where Δv is the change in velocity (100 m/s), ve is the exhaust speed (1500 m/s), m0 is the initial mass of the rocket and fuel system (what we want to find), and mf is the final mass of the rocket and fuel system (m0 - 100 kg).
Solving for m0, we get:
m0 = mf * exp(Δv / ve) = (m0 - 100 kg) * exp(100 / 1500)
Simplifying this equation, we get:
m0 = 100 kg / (1 - exp(100 / 1500))
m0 = 5866.9 kg (rounded to four significant figures)
Therefore, the initial mass of the rocket and fuel system was approximately 5866.9 kg.
estimate the work you do to mow a lawn 10m by 20m with a 50 cm wide mower. Assume you push with a force of about 15 N.
Answer:
W = 6000 Joule
Explanation:
Work is defined as force times distance
W = F * d
We know that F = 15N, we just need the distance (d)
Imagine you have a square lawn with length of 10 m and width of 20m. So, we want to know the the distance you have to travel to cover every square meter of the lawn.
The width of the mower is only 50 cm = 0.5 m.
This means that you have to go back and forth 40 times to cover 20m (lawn width), with a distance of 10 m (lawn length). So,
d = 10 (meter) * 40 (times) = 400 meter
Therefore:
W = (15) * (400) = 6000 J
3.
Engineers use
O electrical conductors
resistance
to prevent electricity from flowing to the wrong place.
electrical insulators
semiconductors
Engineers use electrical insulators to prevent electricity from flowing to the wrong place.
What are electrical insulators?Insulators are materials that do not conduct electricity easily and are used to separate electrical conductors to prevent current leakage or short circuits. Common insulating materials include rubber, plastic, glass, and ceramic. By using insulators, engineers can ensure that electrical energy is directed along the intended path and that electrical equipment operates safely and efficiently.
. Insulators are commonly used in a variety of applications, including electrical wiring, power transmission and distribution systems, electronic devices, and high-voltage equipment. Common insulating materials include rubber, plastic, glass, ceramic, and air. The choice of insulating material depends on various factors such as the required level of insulation, the operating temperature, and the environment in which the insulator will be used.
Learn more about insulators at:
https://brainly.com/question/11845176
#SPJ1
A boy of mass 60 kg and a girl of mass 40 kg are together and at rest on a frozen pond and push each other apart. The girl moves in a negative direction with a speed of 3 m/s. What must be the total final momentum of the boy and girl combined?
A. 0 kgm/s
B. -120 kgm/s
C. 120 kgm/s
D. -100 kgm/s
Answer:
Explanation:
The total initial momentum of the system is zero since the boy and girl are at rest initially. According to the law of conservation of momentum, the total final momentum of the system must also be zero.
If the girl moves in a negative direction with a speed of 3 m/s, then she gains a momentum of -3 x 40 = -120 kgm/s in the negative direction. To conserve momentum, the boy must gain a momentum of +120 kgm/s in the positive direction, so that the total momentum of the system remains zero.
Therefore, the total final momentum of the boy and girl combined is 120 kgm/s in the positive direction. The answer is C. 120 kgm/s.
Answer:
The girl acquires a velocity of -3 x 40 = -120 kgm/s in the negative direction if she goes with a speed of 3 m/s in the opposite direction. The boy must acquire a momentum of +120 kgm/s in the positive direction to preserve and keep the system's overall momentum at zero.
Explanation:
The answer is option D
Brainliest please :)
6.1 Instantaneous communication. In your own words, explain why you
cannot send a message instantaneously using the mechanism of ex-
periment 6.1. If quantum mechanics were deterministic rather than
probabilistic, yet the distant atoms still always left from opposite
exits of a stern gerlach analyzer, would you then be able to send a message instantaneously?
What if the operator of the left-hand Stern-Gerlach analyzer were
somehow able to force his atom to come out of the + exit?
In Experiment 6.1, two entangled atoms are delivered to several Stern-Gerlach analyzers where the spins are detected in various orientations. Each atom's measurement result is probabilistic and arbitrary. Because there is no way to influence how the measurement on the distant atom turns out, it is impossible to use this process to convey a message instantly.
What is quantum mechanics?A fundamental area of physics called quantum mechanics examines how matter and energy behave at the atomic and subatomic scales. The behavior of particles like electrons, protons, and photons as well as their interactions are understood and described mathematically.
The idea of entanglement, which describes how two or more particles can come to be connected in such a way that their states are correlated even though they are separated by a considerable distance, is also introduced by quantum mechanics.
Learn more about quantum mechanics on https://brainly.com/question/26095165
#SPJ1
In a hydraulic lift, if the radius of the smaller piston is 2.0 cm and the radius of the larger piston is 20.0 cm.
a) What is the increase in pressure caused by the 250 N force on the small piston.
ANSWER: 2 x 10E5 Pa
^^^^^^^^^^^^^^^^^^^^^^^
b) If the larger piston moves 5 cm, how far does the smaller piston move?
ANSWER: 5m
^^^^^^^^^^^^^^^^^^
OR: F= 250* (20^2/2^2) =25000 N
P= 250/(area of small piston) = 7.85*10^7 Pa
h= 5*(20^2/2^2)= 500 cm
The pressure exerted on the fluid by the force applied on the small piston can be calculated using the formula:
P = F/A
where P is the pressure, F is the force, and A is the area on which the force is applied. Since the force is applied on the smaller piston, we need to use its area:
A_small = πr_small^2
where r_small is the radius of the smaller piston. Thus,
A_small = π(0.02 m)^2 = 1.2566 x 10^-3 m^2
The force applied on the small piston is 250 N. Thus,
P = F/A_small = 250 N / 1.2566 x 10^-3 m^2 = 1.989 x 10^5 Pa
Therefore, the increase in pressure caused by the 250 N force on the small piston is 1.989 x 10^5 Pa, which is approximately equal to 2 x 10^5 Pa (to two significant figures).
How far can the smaller piston moves when the larger piston moves 5 cm?b) We can use the principle of conservation of volume to determine how far the smaller piston moves when the larger piston moves 5 cm. The volume of the fluid in the hydraulic lift remains constant, so we have:
A_small × h_small = A_large × h_large
where h_small and h_large are the heights of the fluid columns above the smaller and larger pistons, respectively. Since the lift is filled with an incompressible fluid, the pressure is the same throughout the fluid. Thus,
P = F/A_small = F/A_large
Multiplying both sides of this equation by the areas of the pistons, we get:
F × A_small = F × A_large
Substituting the given values, we get:
250 N × (π(0.02 m)^2) = F × (π(0.20 m)^2)
Solving for F, we get:
F = 250 N × (0.02 m/0.20 m)^2 = 25 N
Now, we can use the force applied on the larger piston and the area of the smaller piston to calculate the force on the smaller piston:
F_small = F × (A_small/A_large) = 25 N × (1.2566 x 10^-3 m^2 / (π(0.20 m)^2)) = 0.1989 N
Using the formula for pressure, we can calculate the height of the fluid column above the smaller piston:
P = F_small/A_small = h_small × ρ × g
where ρ is the density of the fluid and g is the acceleration due to gravity. Since the density of the fluid and the acceleration due to gravity are constants, we can simplify this equation to:
h_small = F_small/(A_small × ρ × g)
Substituting the given values, we get:
h_small = 0.1989 N / (1.2566 x 10^-3 m^2 × 1000 kg/m^3 × 9.81 m/s^2) = 0.0159 m
Therefore, the smaller piston moves 0.0159 m (or approximately 1.6 cm) when the larger piston moves 5 cm.
Learn more about piston from
https://brainly.com/question/16078945
#SPJ1
creation
Design a device to minimize impact from a collision.
Design a device to convert one form of energy to another.
In 2-3 paragraphs explain your design, the materials that would be used to construct it, its function, and the relative efficiency of your design compared to something that already exists and performs a similar function
The device I would design to minimize impact from a collision would be a shock absorber made from a combination of rubber and metal. The device would be installed between the two colliding objects, and its function would be to absorb and dissipate the energy of the collision, thereby reducing the impact forces on the objects.
CONSTRUCTION:
Compared to existing shock-absorbing devices such as airbags and crumple zones, this design would be more efficient in reducing the impact forces on the colliding objects. Unlike airbags and crumple zones, which are designed to absorb the impact forces by deforming, the shock absorber would absorb the impact energy through compression and dissipation of the energy as heat.
Designing a device to convert one form of energy to another:The device I would design to convert one form of energy to another would be a piezoelectric generator. The function of this device would be to convert mechanical energy into electrical energy through the use of piezoelectric materials.The piezoelectric generator would consist of a piezoelectric material such as quartz or lead zirconate titanate (PZT) sandwiched between two metal plates. When mechanical stress is applied to the piezoelectric material, it generates an electrical voltage across the metal plates.Compared to existing devices such as generators and batteries, the piezoelectric generator would be more efficient in converting mechanical energy into electrical energy. This is because the piezoelectric effect is a direct conversion of mechanical energy into electrical energy, without the need for any intermediate steps such as the conversion of mechanical energy into rotational energy in a generator. Additionally, the piezoelectric generator would be smaller and more lightweight than traditional generators, making it ideal for use in portable electronic devices.
An electric field of 2250 N/C is produced by a charge of 4.82 x 10^-11 C. For this field strength, what is the distance to the charge? (Kc = 8.99 x 10^9 NM^2 / C^2 )
Answer:
1.77 cm
Explanation:
The electric field strength produced by a point charge can be calculated using the equation:
E = k * Q / r^2
where E is the electric field strength, k is Coulomb's constant (k = 8.99 x 10^9 N m^2 / C^2), Q is the charge, and r is the distance between the charge and the point where the field is being measured.
Rearranging this equation to solve for r, we get:
r = sqrt(k * Q / E)
Substituting the given values, we get:
r = sqrt((8.99 x 10^9 N m^2 / C^2) * (4.82 x 10^-11 C) / (2250 N/C))
r = 0.0177 m or 1.77 cm
Therefore, the distance to the charge is 1.77 cm for this electric field strength.
Brainliest for answer!! How does the light spectrum measured for a nearby star compare to the light spectrum of a distant galaxy that is moving rapidly away from the observer? Explain what causes the differences between the two spectra. Answer in 3-5 sentences please.
Answer:
The light spectrum measured for a nearby star can be used as a benchmark for more distant stars because two stars with identical spectra have the same intrinsic luminosity. Spectroscopy can be applied to light from a distant galaxy, but the dark lines in the solar spectrum give a unique pattern that can be used to identify the elements present in the star. The light spectrum of a distant galaxy that is moving rapidly away from the observer will be shifted towards the red end of the spectrum due to the Doppler effect, which causes the wavelengths of light to stretch out as the object moves away from the observer.
13. List the general strengths and weaknesses of epidemiology for providing an answer to Mary Beth’s question.
14. List the specific strengths and weaknesses of this study.
15. List the general strengths and weaknesses of toxicology for providing an answer to Mary Beth’s question.
The general strengths of epidemiology for providing an answer to Mary Beth’s question.
epidemiology can study a large populationepidemiology can identify patterns and trends in health and diseaseepidemiology can be used to study different diseases and health conditionsThe general weaknesses of epidemiology for providing an answer to Mary Beth’s question:
epidemiology may not provide a definitive answer or explanationepidemiology results may be affected by biases and confounding variablesThe Specific strengths of a study:
Big sample sizeLengthy follow-up periodThe specific weaknesses of a study are :
Use of self-recorded data, which may be inaccurate or biasedBiased selection due to non-random samplingWhat is epidemiology?Epidemiology is described as the study and analysis of the distribution, patterns and determinants of health and disease conditions in a defined population.
The main objective of epidemiology has been said is to find out what causes different health outcomes in different groups of people.
Learn more about epidemiology at:
https://brainly.com/question/29609224
#SPJ1
A mango hanging on a tree possesses a potential energy of 150 J.If the mass of the mango is 5kg Calculate the height of the mango from the ground take (g = = 10 m/s²
Answer: 3 meters from the ground
Explanation:
gravitational potential energy= mass*height*acceleration of free fall(g)
150=5*h*10
h=150/50
h= 3 m
state the energy transfer that takes place as the ball changes shape during the contact between the racquet and the ball
When the ball hits the racquet, it gets squished, and it gains elastic energy, since it is compressed.
Which of the following is not among the uses of dimensional analysis? (a) determination of the Numerical constant (b) to convert one system of unit to another (c) to change the units of derived quantities (d) to test the correctness of an equation
To convert one system of unit to another of derived quantities is not a use of dimensional analysis.
What is dimensional analysis?Checking for consistency in the dimensions on both sides of an equation entails looking at the dimensions of the physical quantities involved in a problem, such as length, mass, time, electric charge, and temperature.
The core tenet of dimensional analysis is that physical quantities, such as length, mass, and time, may be described in terms of their basic dimensions.
Learn more about dimensions:https://brainly.com/question/1769579
#SPJ1
All of the options listed are included in the uses of dimensional analysis.
What is dimensional analysis?Dimensional analysis is a powerful tool used in physics to:
check the correctness of equations derive new equationsconvert units from one system to anotherdetermine numerical constants that relate physical quantities.The dimensional analysis involves analyzing the dimensions of physical quantities and using them to establish relationships between them.
By using the principles of dimensional analysis, we can simplify complex physical problems and gain insights into the behavior of physical systems.
More on dimensional analysis can be found here: https://brainly.com/question/13156854
#SPJ1
5) Find the electric current of this circuit:
( ) 5 A
( ) 8.5 A
( ) 3 A
( ) 10 A
The electric current in the circuit below is 3 A And the right option is C. 3A.
What is electric current?
Electric current is the rate of flow of charge in a circuit.
To calculate the electric current in the circuit below, we use the formula:
Formula:
I = V/R'.....................Equation 1Where:
I = Electric currentV = VoltageR' = Effective resistanceFrom the question,
Given:
V = 285 VR' = (20//20)+25+25+15R' = (20/2)+25+25+15+20R' = 10+25+25+15R' = 95 ohmsSubstitute these values into equation 1
I = 285/95I = 3 AHence, the right option is C. 3A
Learn more about electric current here: https://brainly.com/question/24858512
#SPJ1