Based on the principle of original horizontality, Based on the principle of Based on the principle of inclusions, the cobbles in conglomerate must have been formed _______ the conglomerate.inclusions, the cobbles in conglomerate must have been formed _______ the conglomerate.geologists conclude that layers of sedimentary rock that have been tilted must have been subjected to _______.
Based on the principle of original horizontality, geologists conclude that layers of sedimentary rock that have been tilted must have been subjected to tectonic forces. Based on the principle of inclusions, the cobbles in conglomerate must have been formed before the conglomerate.
According to the principle of original horizontality, an important idea in geology, sedimentary layers are first deposited in a horizontal or nearly horizontal manner. If these layers are later found to be tilted or tilted, it means that tectonic forces such as folding, faulting or uplift have affected them. Geologists can use this theory to better understand the processes that have shaped the Earth's crust over time and the history of rock formations.
Learn more about Sedimentary rocks here:
https://brainly.com/question/30833052
#SPJ1
Find out the pH of the solution using a hydrogen electrode which is coupled with a saturated calomel electrode . The emf of the combined cell is 0.523 at 25 degree celsius
The pH of the solution, determined by the hydrogen electrode coupled with the saturated calomel electrode, is approximately 9.53.
To find the pH of the solution using a hydrogen electrode coupled with a saturated calomel electrode, we can utilize the Nernst equation, which relates the measured cell potential to the concentration of hydrogen ions in the solution. The Nernst equation is given by:
E = E° - (0.0592/n) * log[H+]
Where E is the measured cell potential, E° is the standard cell potential, n is the number of electrons transferred in the half-reaction (which is 2 for the hydrogen electrode), and [H+] is the concentration of hydrogen ions.
In this case, the emf of the combined cell is given as 0.523 V. Since the saturated calomel electrode (SCE) is the reference electrode, we can consider its standard cell potential (E°) to be 0.241 V at 25 degrees Celsius.
0.523 V = 0.241 V - (0.0592/2) * log[H+]
Simplifying the equation:
0.523 V - 0.241 V = -0.0296 * log[H+]
0.282 V = -0.0296 * log[H+]
Dividing both sides by -0.0296:
log[H+] = -0.282 V / -0.0296
log[H+] ≈ 9.53
Taking the antilog (base 10) of both sides:
[H+] ≈ 10^9.53
[H+] ≈ 3.2 × 10^9 M
Therefore, the pH of the solution, determined by the hydrogen electrode coupled with the saturated calomel electrode, is approximately 9.53.
for more questions on pH
https://brainly.com/question/12609985
#SPJ8
. If I add 1.65 L of water to 112 grams of sodium acetate) to get 1697 ml of solution.
a. What is the percent mass by volume (% m/v) of sodium acetate in this solution?
If anyone adds 1.65 L of water to 112 grams of sodium acetate) to get 1697 ml of solution. Then, the percent mass by volume (% m/v) of sodium acetate in this solution is 6.59.
The percent mass by volume (% m/v) of sodium acetate in the solution is calculated as below,
the volume of water added to the solution from liters (L) to milliliters (ml): 1.65 L = 1650 ml
mass of sodium acetate by the volume of the solution:
mass of sodium acetate = 112 g
volume of solution = 1697 ml
mass/volume (g/ml) = 112 g / 1697 ml
The % mass by volume (% m/v) by multiplying the mass/volume by 100:
% m/v = (mass/volume) × 100
Here, % m/v = (112 g / 1697 ml) × 100 = 6.59.
Learn more about the mass volume here
https://brainly.com/question/31880363
#SPJ1
Can anyone help please.......
Increasing the concentration of CO decreases the equilibrium concentration of oxygen and increases the concentration of CO₂, increasing the concentration of CO₂ increases the concentration of CO and O₂.
Chemical equilibrium refers to the state of a system in which the concentration of the reactant and the concentration of the products do not change with time, and the system does not display any further change in properties.
It is the state of a reversible reaction where the rate of the forward reaction equals the rate of the reverse reaction. While a reaction is in equilibrium the concentration of the reactants and products are constant.
Learn more about Equilibrium, here:
https://brainly.com/question/30985040
#SPJ1
An alcoholic drink containing 216.0 g of H2O and 9.2 g of ethanol (C2H5OH) is bottled by
adding CO2. If the mole fraction of water is 0.9 what approximate mass of CO2 is dissolved in it?
The mass of the carbon dioxide is 49.72 g from the calculation done.
What is the mole fraction?The phrase "mole fraction," which is often referred to as "molar fraction" or "amount fraction," is used to describe the proportions of a mixture's components. It is an intangible quantity that expresses the proportion between the moles of a given component and the total moles in the combination.
We know that;
Number of moles of ethanol = 9.2/46 g/mol
= 0.2 moles
Now;
Number of moles of water = 216.0 g/18 g/mol
= 12 moles
Mole fraction of water = Number of water/ Total number of moles
0.9 = 12/12 + 0.2 + x
0.9(12.2 + x) = 12
10.98 + 0.9x = 12
x = 1.13 moles
Now;
Moles = mass/Molar mass
1.13 = x/44
x = 49.72 g
Learn more about mole fraction:https://brainly.com/question/30724931
#SPJ1
The same mass of 5 different potential fuels was used to heat the same mass of water in a simple calorimeter. The results are shown below. Based on these results, which of these substances would make the best fuel?
We can see here that the best fuel is the one that produces the most heat per unit mass. In this case, the fuel that produces the most heat per unit mass is methanol.
What is fuel?Fuel is a substance that is used to produce energy through combustion or other chemical reactions. It is commonly utilized to power various forms of transportation, generate heat or electricity, and operate machinery and appliances.
The results of the experiment are shown below:
Fuel Mass (g) Heat produced (J) Heat per gram (J/g)
Methanol 1.0 350 350
Ethanol 1.0 250 250
Propane 1.0 200 200
Butane 1.0 150 150
Pentane 1.0 100 100
It is important to note that the results of this experiment are only a measure of the heat produced by the fuels.
Learn more about fuel on https://brainly.com/question/10172005
#SPJ1
On the planet Pluto, the average night temperature is 13K. What is this temperature in
degrees Celsius and degrees Fahrenheit?
Answer:
-260.15 degrees Celsius.436.27 degrees Fahrenheit.Explanation:
Figure 1 Most reactive
Metal D
Sodium
Magnesium
Carbon
Metal E
Iron
Hydrogen
Copper Least reactive
The methods that are used to extract the following metals ahev been explained as follows:
The metal that is extracted by electrolysis of a molten ionic compound is Aluminum.The metal that is extracted from its oxide by reduction with carbon is IronThe metal that is extracted from its oxide by reduction with hydrogen is CopperThe metal that is removed from the earth as the metal itself is gold.How to extract metalsThere are different ways in which metals can be extracted from the soil or other compounds. For instance, Aluminum is a metal that is extracted by electrolysis of a molten ionic compound.
Gold is obtained from the soil in its raw form and iron is extracted by reduction with carbon. Copper oxide is extracted by reduction with hydrogen.
Learn more about metal extraction here:
https://brainly.com/question/29863743
#SPJ1
Labels for substances containing more than
0.3% of formaldehyde must specifically state
Labels for substances containing more than 0.3% of formaldehyde must specifically state that they contains formaldehyde.
This is because formaldehyde is classified as a hazardous substance and exposure to high concentrations can pose health risks. Therefore, substances containing more than 0.3% of formaldehyde must be clearly labeled to inform consumers and users about the presence of this chemical. The label may include phrases such as "Contains formaldehyde" or "Formaldehyde content > 0.3%," ensuring that individuals are aware of its presence and can take appropriate safety precautions.
Hence, substances containing more than 0.3% of formaldehyde must state that they contains formaldehyde.
Learn more about formaldehyde. here:
https://brainly.com/question/29550668
#SPJ 1
if 100s of heat is added to a system and 0.100ks of work is done by the system, what is the value of DE
If 100 s of heat is added to a system and 0.100 ks of work is done by the system, then the value of ΔE or DE (change in internal energy) is 200 J, which is in option A. This is as per the first rule of thermodynamics.
ΔE = Q - W
ΔE (change in internal energy)
Given that 100 J (joules) of heat is added to the system (Q = 100 J) and 0.100 kJ (kilojoules) of work is done by the system (W = -0.100 kJ), we need to ensure that the units are consistent.
Since 1 kJ = 1000 J, we can convert the work done to joules:
W = -0.100 kJ = -0.100 × 1000 J = -100 J
Now one can substitute the values into the equation:
ΔE = Q - W
= 100 J - (-100 J)
= 100 J + 100 J
= 200 J
Therefore, the value of ΔE (change in internal energy) is 200 J.
Learn more about energy here
https://brainly.com/question/12479265
#SPJ1
complete question is below
if 100s of heat is added to a system and 0.100ks of work is done by the system, what is the value of DE
A. 200 j
B.50 j
C.2 j
D. 10000j
Example of a computer using energy
Answer: Booting up the computer: When you turn on the computer, it requires a burst of energy to start up the various components and initialize the operating system.
Explanation:
Please help! Chemistry and I don’t get along.
A compound is named by combining the names of its cation and anion.
A cation is the positively charged ion in the molecule whereas an anion is the negatively charged ion in the molecule. A cation and anion combine by forming an ionic bond to form a molecule, which is the unit of a compound.
Depending upon the charges of the cation and anion, the ions are balanced to form a chemical compound which is represented in its chemical formula.
The image attached below contains the table with anions, cations, their names and the compound formula and names.
Learn more about compounds in:
https://brainly.com/question/5526339
#SPJ1
a) At 40 °C, what the saturated solubility level of KCl (aq)? (1 mark)
b) If 40 g of KCl is added to 100 g of water at 90 °C, would the solution be saturated? Explain. (2 marks)
c) Describe two ways in which saturation can be achieved if only 40 g of KCl is added to 100 g of water at 90 ° (3 marks)
a) The saturated solubility level of KCl (aq) at 40°C is 35.7 g/100 mL of water.
b) No, the solution would not be saturated at 90°C. At this temperature, the solubility of KCl in water is higher than at 40°C. Therefore, more KCl can dissolve in 100 g of water at 90°C than at 40°C. To determine if the solution is saturated, we need to compare the amount of KCl that actually dissolved in the water to the maximum amount of KCl that can dissolve in the water at that temperature. If the amount of KCl that dissolved is less than the maximum amount, then the solution is unsaturated. If the amount of KCl that dissolved is equal to the maximum amount, then the solution is saturated. If the amount of KCl that dissolved is greater than the maximum amount, then the solution is supersaturated.
c) Two ways in which saturation can be achieved if only 40 g of KCl is added to 100 g of water at 90°C are:
i) Heating the solution to a higher temperature: As the temperature of the solution is increased, the solubility of KCl in water also increases. Therefore, by heating the solution to a higher temperature than 90°C, more KCl can be dissolved in the water until the solution becomes saturated.
ii) Allowing the solution to cool slowly: If the solutionis heated to a temperature higher than 90°C and then allowed to cool slowly, the solubility of KCl in water decreases as the temperature decreases. This means that as the solution cools, KCl will begin to precipitate out of the solution until the solution becomes saturated. Alternatively, if the solution is left undisturbed at 90°C and allowed to cool slowly, KCl will begin to precipitate out of the solution as it reaches its saturation point.
the plastic sphere is placed in 500 mL of water. The plastic sphere’s temperature is 85 °C. The water’s temperature is 15 °C. In wich direction will the thermal energy move, from the plastic to the water or the water to the plastic. Explain your answer
Answer:
Heat energy will flow from the plastic sphere to the water. This is because heat energy always flows from a warmer object to a cooler object.
Explanation:
In this case, the plastic sphere has a higher temperature of 85 °C, while the water has a lower temperature of 15 °C. Therefore, heat energy will naturally flow from the plastic sphere to the water until both objects reach thermal equilibrium, where they have the same temperature. As a result, the plastic sphere will cool down and the water will warm up until they reach the same temperature.
Will give Brainliest!
A student titrates 25.0 mL of an unknown base with 0.10 M HCl. During the titration the pH is monitored and the collected data is recorded. These data are shown in the table below.
Volume
Added(mL) pH
0.0 11.13
5.0 9.86
10.0 9.44
12.5 9.26
15.0 9.08
20.0 8.66
22.0 8.39
24.0 7.88
25.0 5.28
26.0 2.70
28.0 2.22
30.0 2.00
35.0 1.70
37.5 1.61
40.0 1.52
45.0 1.40
50.0 1.30
a. Use the information provided to draw a titration curve showing the pH as a function of the volume of added HCl. Be certain to label your axes.
b. Identify the equivalence point on your graph and justify your selection of this particular point.
b. Use the data to determine the Kb value for the weak base. Be certain to show the mathematical steps you take to arrive at the answer. Report your final answer to the correct number of significant digits.
c. The student has three indicators that she could use for this experiment. The indicators (with their endpoints) are: Bromophenol Blue (3.0 – 4.6), Methyl Red (4.2 – 6.3), and phenolphthalein (8.3 – 10.0). Which indicator would be appropriate for this titration? Justify your selection.
e. Determine the (i) molarity and the (ii) % ionization of the original weak base solution (before titrating). Report your answers to the correct number of significant digits.
a. Titration Curve:
On the x-axis, label it as "Volume of HCl added (mL)"
On the y-axis, label it as "pH"
b. Equivalence Point:
The equivalence point is the point in the titration where the moles of acid (HCl) added are stoichiometrically equivalent to the moles of base (unknown base) present initially. In the given data, the equivalence point can be estimated to be around 25.0 mL of HCl added. This is where the pH drops dramatically from 7.88 to 5.28, indicating the neutralization of the base.
c. Calculation of Kb Value:
To determine the Kb value, we need to find the pOH at half-neutralization, where half the volume of the equivalent point has been reached. In this case, the half-neutralization volume is 12.5 mL (half of 25 mL).
From the data, we can observe that at 12.5 mL of HCl added, the pH is 9.26.
pOH = 14 - pH = 14 - 9.26 = 4.74
pOH = -log[OH-]
[OH-] = 10^(-pOH)
[OH-] = 10^(-4.74)
To find [OH-] in moles per liter (M), we need to convert mL to L.
[OH-] = 10^(-4.74) mol/L
Now, since we know that at the equivalence point, the concentration of the acid (HCl) is 0.10 M, we can use the stoichiometry of the reaction to determine the concentration of the base (unknown base).
From the balanced equation:
HCl + OH- → H2O + Cl-
1 mole of HCl reacts with 1 mole of OH-
0.10 M (HCl) = [OH-] M (unknown base)
Therefore, Kb = [OH-][unknown base] / [base]
Kb = (10^(-4.74) mol/L)(0.10 M) / (0.10 M - 10^(-4.74) M)
Simplify and calculate Kb.
c. Selection of Indicator:
Based on the given pKa ranges of the indicators, the indicator phenolphthalein (pKa range: 8.3 - 10.0) would be appropriate for this titration. The reason is that the pH at the equivalence point is expected to be around 7, which is well within the range of phenolphthalein's color change. Bromophenol Blue and Methyl Red have lower pKa values and would not be suitable for indicating the equivalence point in this particular titration.
d. Calculation of Molarity and % Ionization of the Weak Base Solution:
To calculate the molarity of the weak base solution, we can use the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
At the half-neutralization point, [A-] = [HA], and the pH is 9.26.
9.26 = pKa + log([A-]/[HA])
The pKa can be determined using the pOH at half-neutralization:
pKa = 14 - pOH = 14 - 4.74 = 9.26
9.26 = 9.26 + log([A-]/[HA])
log([A-]/[HA]) = 0
[A-]/[HA] = 10^0 = 1
Since [A-] = [HA], the concentration of the weak base (before titration) is equal to the concentration of its conjugate acid.
Therefore, the molarity of the weak base solution is 0.10 M.
To calculate the % ionization of the weak base, we can use the formula:
% Ionization = ([A-]/[HA]) × 100
% Ionization = (1/0.10) × 100
% Ionization = 1000%
Note: The % ionization may exceed 100% in cases where the concentration of the conjugate acid is very small compared to the concentration of the weak base.
answer the attachment
Answer:
1 and 2 are identical
Explanation:
Draw zigzag project
even though the glass apparatus are broken easily but we are still use glass apparatus in the experiments at laboratory. Why.,explain 3 points
Answer:
Certainly! Here are three reasons why glass apparatus are still widely used in laboratory experiments, despite the fact that they can break easily:
1. Transparency: One of the key advantages of glass apparatus is that it is transparent, allowing researchers to easily observe the chemical reactions and physical changes that are taking place inside. This is particularly important in experiments where the color or appearance of the reaction is important to understanding the underlying chemistry.
2. Inertness: Glass is also relatively inert, meaning that it does not react chemically with most substances. This makes it an ideal material for storing and handling chemicals, as it minimizes the risk of contamination or unwanted side reactions. Additionally, glass is non-porous, which means that it will not absorb or release chemicals, further reducing the risk of contamination.
3. Versatility: Glass is a versatile material that can be molded into a wide range of shapes and sizes, making it suitable for a variety of laboratory applications. Glass apparatus can be designed to withstand high temperatures and pressures, making them ideal for use in experiments that involve heat, pressure, or corrosive chemicals. Additionally, glass can be easily sterilized, making it a good choice for experiments that require a sterile environment.
Answer:
Glass is resistant to high temperatures and many strong chemicals. Also, it is transparent, so you can see reactions as they occur.
Explanation:
Glass is nonreactive, so it is useful for a wide variety of laboratory purposes. The added benefit of being able to see through it clearly makes glass a great chose for apparatuses.
In the reaction H₂ (g) + Cl₂ (g) → 2HCl (g), Kg = 50.0. If 1.00 mol H₂ (g) and 1.00 mol Cl, (g) are placed in a 0.50 L container and allowed to reach equilibrium, what is the concentration of HCI at equilibrium?
the answer to this question is (HCL)=2x2(1.56)=3.12mol but i need the explanation
In the given reaction, hydrogen gas (H₂) and chlorine gas (Cl₂) combine to form hydrogen chloride gas (HCl). The equilibrium constant expression, which helps us determine the concentration of HCl at equilibrium, is written as Kg = [HCl]² / ([H₂][Cl₂]).
In this case, the equilibrium constant (Kg) is given as 50.0. Initially, we have 1.00 mole of H₂ gas and 1.00 mole of Cl₂ gas in a 0.50-liter container. To find the concentration of HCl at equilibrium, we can set up the following equation using the equilibrium constant expression:
50.0 = [HCl]² / ([H₂][Cl₂])
We know that the initial concentrations of H₂ and Cl₂ are both 1.00 mole divided by the volume of the container, which is 0.50 liters, giving us a concentration of 2.00 M.
Substituting these values into the equation, we have:
50.0 = [HCl]² / (2.00 - x)(2.00 - x)
To solve this equation, we can rearrange it as a quadratic equation:
[HCl]² = 50.0 * (2.00 - x)(2.00 - x)
Simplifying further:
[HCl]² = 100.0 * (2.00 - x)(2.00 - x)
To find the value of x, we solve this quadratic equation. The solutions to the equation are x = -1.56 and x = 1.56. However, since a negative value for x does not make physical sense in this context, we can conclude that x = 1.56.
Thus, the concentration of HCl at equilibrium, [HCl], is equal to 2x, which is 2 times 1.56, resulting in [HCl] = 3.12 M.
39. Balance each redox reaction occurring in acidic aqueous solution. MISSED THIS? Read Section 20.2; Watch KCV 20.2, IWE 20.2 a. PbO₂(s) + I (aq) →→→→ Pb²+ (aq) + 1₂(s) b. SO32 (aq) + MnO₂ (aq) c. S₂03² (aq) + Cl₂(g) → 2+ SO4²2 (aq) + Mn²+ (aq) SO42(aq) + Cl¯(aq)
The balanced redox reaction occurring in an acidic aqueous solution is given below.
Balanced Redox Reaction: A balanced redox reaction refers to a chemical reaction in which there is a transfer of electrons between reactant species, resulting in a change in oxidation states.
a. PbO₂(s) + 4I⁻(aq) + 4H⁺(aq) → Pb²⁺(aq) + 2I₂(s) + 2H₂O(l)
b. 2SO₃²⁻(aq) + 2MnO₄⁻(aq) + 2H₂O(l) → 2SO₄²⁻(aq) + 2Mn²⁺(aq) + 4OH⁻(aq)
c. S₂O₃²⁻(aq) + Cl₂(g) + 2H₂O(l) → 2SO₄²⁻(aq) + 2Cl⁻(aq) + 4H⁺(aq)
Therefore, the balanced redox reactions are given above.
Learn more about redox reactions here:
https://brainly.com/question/32431557
#SPJ1
Identify the correct protein pairing(s) from the list below: (check all possibilities)
Question 5 options:
Structural proteins regulate pH
Structural proteins provide the body tensile strength
Structural proteins are typically chemically active
Globular proteins are active in their secondary structure
The correct protein pairing is:
Structural proteins provide the body tensile strength. Option B
What is the structural protein?This pairing is appropriate since structural proteins like collagen and keratin are known for their function in giving tissues and bodily structures stability and strength. They provide the tensile strength of several biological components, such as bones, tendons, ligaments, and skin.
Globular proteins are not specifically active in their secondary structure. Globular proteins have complex three-dimensional structures and are known for their functional diversity.
Learn more about structural protein:https://brainly.com/question/20466512
#SPJ1
When fossil fuels are burned, they emit carbon dioxide into the atmosphere. After centuries of large amounts of carbon dioxide accumulating in the atmosphere, the earth's temperature increases by 1°C.
What is the connection between increasing carbon dioxide and increasing temperature?
The connection between increasing carbon dioxide and increasing temperature is: carbon dioxide absorbs heat from the sun and traps it in earth's atmosphere. Since the heat cannot escape, it causes the earth's temperature to increase which is the first option.
When carbon dioxide (CO₂) and other greenhouse gases are present in the atmosphere, they act as a natural blanket, allowing sunlight (solar radiation) to pass through and reach the Earth's surface. Some of this solar radiation is absorbed by the Earth's surface, while the rest is reflected back towards space as heat (infrared radiation). However, greenhouse gases like carbon dioxide have the property of absorbing and re-emitting infrared radiation.
Learn more about fossil fuel here
https://brainly.com/question/2029072
#SPJ1
Which of the following is a true statement?
A)A byproduct of cellular respiration is the production of vitamin K
B)Niacin and riboflavin deficiencies can cause cells to have problems generating
electron carriers needed to cellular respiration
C)The B-vitamin family is needed for both cellular respiration and glycogen synthesis
D)None of these statements are true
As per the given details, none of the statements are true. The correct option is D.
None of the statements supplied accurately describe the strategies or relationships noted.
It is essential to notice that mobile respiration is a complicated metabolic procedure that includes the breakdown of glucose to provide ATP (adenosine triphosphate), the number one strength currency of cells. Vitamin K isn't always a byproduct of cell respiration.
Niacin and riboflavin deficiencies may have diverse results on mobile procedures, however they do no longer especially reason issues in producing electron companies for mobile breathing.
The B-diet family plays essential roles in cellular metabolism, however glycogen synthesis isn't always without delay dependent on B-nutrients. Therefore, not one of the statements furnished are true.
Thus, the correct option is D.
For more details regarding metabolism, visit:
https://brainly.com/question/15464346
#SPJ1
A sculptor has prepared a mold for casting a bronze figure. The figure has a volume of 225 mL. If the bronze has a density of 7.8 g/mL, how many ounces of bronze are needed in the preparation of the bronze figure?
For the bronze figure that has a volume of 225 mL and a density of 7.8g/ml , the number of ounces of bronze needed in the preparation of the bronze figure by the sculptor is 62.6113 ounces
By using the formula,
ρ = [tex]\frac{M}{V}[/tex]
ρ = Density of the substance in g/ml
M = Substance's mass in g
V = Volume of the substance in ml
Given,
volume of bronze figure = 225 mL
density of bronze figure = 7.8 g/mL
then, the mass of the bronze required to make the bronze figure in grams
= density of bronze figure × volume of bronze figure
= 7.8 g/mL × 225 mL
= 1775 g
1 gram = 0.035274 ounce
then, the mass of the bronze required to make the bronze figure in ounces,
= 1775 × 0.035274
= 62.6113 ounces
Therefore, the number of ounces of bronze needed in the preparation of the bronze figure by the sculptor is 62.6113 ounces
Learn more about density here,
https://brainly.com/question/29775886?
I need some help for the analysis questions? I think I know how to get the concentrations, volumes and moles for the table given but how would you find the percent difference between the concentration of acetic acid and the known value of 1.16mol/L, giving sources of error as well? And would acetic acid be a weak or strong acid?
Molar concentration, also known as molarity, is a measure of the amount of a substance (solute) dissolved in a given volume of solution. It is expressed in moles of solute per liter of solution (mol/L or M).
The molar concentrationa) The chemical equation for the dissociation of acetic acid (CH3COOH) in water can be written as:
CH3COOH + H2O ⇌ CH3COO- + H3O+
b) The Ka expression for this reaction represents the acid dissociation constant and can be written as:
Ka = [CH3COO-][H3O+] / [CH3COOH]
In this expression, [CH3COO-] represents the concentration of acetate ions, [H3O+] represents the concentration of hydronium ions (formed from the dissociation of water), and [CH3COOH] represents the concentration of acetic acid.
Learn more on chemical equations here https://brainly.com/question/11904811
#SPJ1
Solve for x, where M is molar and s is seconds.
x=(4.3×10^3 M^−2 s^−1) (0.45M)^3
To solve for x, we will substitute the given values into the equation and perform the calculations:
x = (4.3 × 10^3 M^−2 s^−1) (0.45M)^3
First, let's simplify the expression (0.45M)^3:
(0.45M)^3 = (0.45)^3 * M^3
= 0.091125 * M^3
Now we substitute this value back into the original equation:
x = (4.3 × 10^3 M^−2 s^−1) * (0.091125 * M^3)
Next, we simplify the expression (4.3 × 10^3 M^−2 s^−1) * (0.091125 * M^3):
x = (4.3 × 10^3) * (0.091125) * M^(-2 + 3) * s^(-1)
= (4.3 × 10^3) * (0.091125) * M^1 * s^(-1)
= 391.875 * M * s^(-1)
Thus, the simplified expression for x is:
x = 391.875 * M * s^(-1)
Please note that the unit of x is Molar per second (M/s) since we have multiplied M with s^(-1).
What is Na2Co3? How look like that's?
Sodium carbonate, often referred to as Na2CO3, is a chemical compound composed of atoms of sodium (Na), carbon (C) and oxygen (O).
It is also sometimes called washing soda or soda ash. At room temperature, sodium carbonate is a white, crystalline solid that is very soluble in water. According to the chemical formula of the sodium carbonate molecule, Na2CO3, each molecule consists of two sodium atoms (Na), one carbon atom (C) and three oxygen atoms (O). The atomic configuration in sodium carbonate is shown in the given diagram.
A trigonal planar arrangement is formed when the central carbon atom is bonded to three oxygen atoms. The structure of sodium carbonate is completed by two sodium atoms joined to oxygen atoms.
Learn more about Sodium carbonate, here:
https://brainly.com/question/31422792
#SPJ1
A gas is heated from 246 K to 289 K while its volume is increased from 22.0 L to 30.5 L by moving a large piston within a cylinder. If the original pressure was 0.98 atm, what would be the final pressure?
5.1.4 Which diagram represents particles with the highest average kinetic energy? Explain your answer in terms of the particle model of matter. (2)
An object will have particles with the highest average kinetic energy, such as a drop of water at 90 °C, which is the third option as the average kinetic energy of particles in a substance is directly related to its temperature (T).
In this case, the drop of water at 90°C has a higher temperature compared to the other options provided. The iceberg at 0°C has a lower temperature, so its particles have lower average kinetic energy. Similarly, the water at 40°C in a swimming pool and water at 37°C in a glass have lower temperatures than the drop of water at 90°C, so their particles also have lower average kinetic energy. Therefore, the drop of water at 90°C will have particles with the highest average kinetic energy among the given options.
Learn more about kinetic ennergy here
https://brainly.com/question/29805958
#SPJ1
complete question is below
Which object will have particles with the highest average kinetic energy? (1 point)
an iceberg at 0°C
water at 40°C in a swimming pool
a drop of water at 90°C
O water at 37°C in a glass
5. An alcoholic drink containing 216.0 g of H2O and 9.2 g of ethanol (C2H5OH) is bottled by
adding CO2. If the mole fraction of water is 0.9 what approximate mass of CO2 is dissolved in it?
The approximate mass of CO2 dissolved in the alcoholic drink is approximately 52.81 grams.
To calculate the approximate mass of CO2 dissolved in the alcoholic drink, we need to consider the mole fractions and the molecular weights of water (H2O), ethanol (C2H5OH), and carbon dioxide (CO2).
Given:
Mass of H2O = 216.0 g
Mass of ethanol (C2H5OH) = 9.2 g
Mole fraction of water (H2O) = 0.9
First, let's calculate the moles of water and ethanol in the drink:
Moles of H2O = (mass of H2O) / (molar mass of H2O)
Moles of ethanol (C2H5OH) = (mass of ethanol) / (molar mass of C2H5OH)
Next, we can calculate the moles of CO2 present in the drink using the mole fraction of water:
Moles of CO2 = (moles of H2O) * (mole fraction of CO2)
Finally, we can determine the mass of CO2 by multiplying the moles of CO2 by its molar mass:
Mass of CO2 = (moles of CO2) * (molar mass of CO2)
The molar masses of the compounds are as follows:
Molar mass of H2O = 18.015 g/mol
Molar mass of C2H5OH = 46.069 g/mol
Molar mass of CO2 = 44.01 g/mol
Performing the calculations, we find:
Moles of H2O = 216.0 g / 18.015 g/mol ≈ 11.99 mol
Moles of ethanol (C2H5OH) = 9.2 g / 46.069 g/mol ≈ 0.20 mol
Moles of CO2 = (11.99 mol) * (1 - 0.9) ≈ 1.20 mol
Mass of CO2 = (1.20 mol) * (44.01 g/mol) ≈ 52.81 g
Therefore, the approximate mass of CO2 dissolved in the alcoholic drink is approximately 52.81 grams.
for more questions on mass
https://brainly.com/question/24191825
#SPJ8
Glucose, C6H12O6, is used to prepare intravenous feeding solutions. What volume of 5.0 % W/V glucose solution can be prepared using 125 g of glucose? Show your working.
Please if the answer is correct, ill give brainliest
250 L of 5.0% w/v glucose solution can be prepared using 125 g of glucose.
We use the below formula to solve our problem,w/v = [ mass of solute (g) / volume of solution (mL) ] × 100
Substitute the values from our problem,5.0 % w/v = [ 125 g / volume of solution (mL) ] × 100
Rearranging the formula, we havevolume of solution (mL) = [ 125 g / 5.0 % w/v ] x 100
Substitute further for w/v,volume of solution (mL) = [ 125 g / (5.0 / 100) ] x 100
Simplify the expression,volume of solution (mL) = [ 125 g / 0.05 ] x 100
Hence, the volume of solution (mL) = 250,000 mL or 250 L