Determine the number of shared and unshared electrons in the structure. shared (bonding) electrons: unshared (lone, nonbonding) electrons: Determine the number of shared and unshared pairs of electrons in the structure. shared (bonding) pairs of electrons: unshared (lone, nonbonding) pairs of electro
Answers
Answer:
Shared (bonding) electrons : 8
Unshared (lone, non-bonding) electrons : 16
Explanation:
The Lewis dot stricture of the molecule attached to this answer shows us all the valence electrons present in the molecule.
Altogether, we have a total number of 24 valence electrons in SO3.
There are eight electrons shared between atoms of elements, these are the bonding electrons.
There are sixteen electrons that are not shared between atoms of elements, These are the lone or non-bonding electrons.
Hence, there are four shared pairs of electrons and eight pairs of unshared electrons.
Related Questions
What is the mass of 5.55 moles of carbon monoxide
Answers
Answer:
[tex]\boxed {\boxed {\sf 155 \ g\ CO}}[/tex]
Explanation:
To convert from moles to mass, the molar mass must be used.
First, write the chemical formula for carbon monoxide. Since the carbon (C) comes first without a prefix, there is 1 carbon atom. The prefix mono- before oxide means 1, so there is also 1 oxygen (O) atom. The formula is CO.
Next, look up their molar masses on the Periodic Table.
C: 12.011 g/mol O: 15.999 g/molSince there is 1 atom of each, the molar masses can be added.
CO: 12.011 g/mol + 15.999 g/mol = 28.01 g/molUse this molar mass as a ratio.
[tex]\frac {28.01 \ g \ CO} {1 \ mol \ CO}[/tex]
Multiply by the given number of moles:5.55
[tex]5.55 \ mol \ CO *\frac {28.01 \ g \ CO} {1 \ mol \ CO}[/tex]
The moles of carbon monoxide cancel.
[tex]5.55 * \frac {28.01 \ g \ CO} {1 }[/tex]
Multiply.
[tex]155.4555 \ g \ CO[/tex]
The original measurement of moles has 3 significant figures, so our answer must have the same. For the number we calculated, it is the ones place. The 4 in the tenths place tells us to leave the 5.
[tex]155 \ g\ CO[/tex]
5.55 moles of carbon monoxide is about 155 grams.
What is the chemical name for OBr2?
Answers
Answer:
The answer is oxygen difluoride
Explanation:
Hope this helped Mark BRAINLEST!!!!
In the given question, the chemical name for [tex]\rm OBr_2[/tex] is oxygen dibromide.
A chemical name is a unique name given to a chemical compound that accurately describes its chemical composition.
The suffix "di-" means two, and "bromo" refers to the presence of two bromine atoms in the compound. The prefix"-oxygen" indicates that the compound contains oxygen.
Therefore, oxygen dibromide is the chemical name for [tex]\rm OBr_2[/tex]. It is a covalent compound and has oxygen as a central atom.
Learn more about chemical name here:
https://brainly.com/question/30633673
#SPJ6
Scoring: Your score will be based on the number of correct matches minus the number of incorrect matches. There is no penalty for missing matches.
Use the References to access important values if needed for this question.
Match the gas sample on the left with a description on the right.
You may use the same answer more than once.
Clear All
0.115 moles of Xe in a 4.87 L container at a temperature of 446K
0.599 moles of Xe in a 5.78 L container at a temperature of 306K
0.444 moles of Xe in a 2.39 L container at a temperature of 408K
0.556 moles of Xe in a 2.11 L container at a temperature of 446K
has the highest average molecular speed
has the lowest average molecular speed
has an average molecular speed between the highest and the lowest
Answers
Answer:
Container 2 has the lowest average molecular speed
Container 4 has the highest average molecular speed
Explanation:
Step 1: Data given
Atomic mass of Xe = 131.29 g/mol
Container 1: Number of moles Xe = 0.115 moles; volume = 4.87 L; temperature= 446K
Container 2: Number of moles Xe = 0.599 moles; Volume = 5.78 L; temperature= 306K
Container 3: Number of moles Xe = 0.444 moles; Volume = 2.39L; Temperature = 408K
Container 4: Number of moles Xe = 0.556 moles; Volume=2.11L; Temperature =446K
Step 2: Calculate average molecular speed
Average molecular speed V = √(8RT/πM)
→With R = he gas constant expressed in units of J/mol-K
→with T = the temperature in Kelvin
→with M = the molar mass of the gas
Average molecular speed depends on T and M
Since it's all Xenon, M is the samefor the 4 containers
Container 1:
V1 = √(8*8.314*446K/π*131.29)
V1 = 8.48
has an average molecular speed between the highest and the lowest
V2= √(8*8.314*306K/π*131.29)
V2= 7.03
has the lowest average molecular speed
V3 = √(8*8.314*408K/π*131.29)
V3 = 8.11
has an average molecular speed between the highest and the lowest
V4 = √(8*8.314*446K/π*131.29)
V4 = 8.48
Since the volume is smaller than in container 1 the average molecular speed will be a higher
has the highest average molecular speed
Take your time please.
Answers
Answer:
1. Observing
2. Classifying
3. Predicting
4. Making a hypothesis
5. Experimenting
6. Measuring
7. Communicating
8. Making an inference
9. Constant
10. Interpreting data
Explanation:
Hope this helps!!
hope it is helpful to you
In which way does asexual reproduction differ from sexual reproduction?
Answers
Answer:
MOUTHWASH lol lol lol lol. im just kidding heres the answer Asexual reproduction involves one parent and produces offspring that are genetically identical to each other and to the parent. Sexual reproduction involves two parents and produces offspring that are genetically unique.
Answer:
Sexual Reproduction has to include 2 parents and it can cause different genetic variety. While asexual reproduction is the parent (1) making copies of itself which has no genetic variety (mainly single celled organisms like protists and such)
Explanation:
My explanation is your answer
can someone help with this please. i will give brainliest
Answers
Answer:
Electromagnetic wave is defined as the wave which is associated with both electrical and magnetic component associated with them. They can travel in vacuum as well and travel with the speed of light.
The electromagnetic radiations consist of radio waves, microwaves, infrared ,Visible , ultraviolet, X rays and gamma rays arranged in order of increasing frequency and decreasing wavelengths.
The visible reagion contains Violet , Indigo , Blue , Green , Yellow , Orange and Red in order of increasimg wavelength and decreasing frequency.
give an example of biotic living conditions.
Answers
Answer:
plants and animals
Explanation:
Answer:
water, light, wind, soil, humidity, minerals, gases
Explanation:
i just know
aluminium containers are used to store and transport nitric acid(HNO3) but not NAOH why?
Answers
Answer:
(i) Concentrated HNO3 can be stored and transported in aluminium containers as it reacts with aluminium to form a thin protective oxide layer on the aluminium surface. This oxide layer renders aluminium passive. (ii) Sodium hydroxide and aluminium react to form sodium tetrahydroxoaluminate(III) and hydrogen gas.
what is the difference between zinc and magnesium
Answers
6. The drawing shows Samir riding his mountain bike.
i) Draw a circle around the places on the drawing where there
should be a lot of friction.
ii) Explain why there should be a lot of friction in these places.
Answers
Answer:
You Need To Upload The Photo Then I Will Help You :)
Explanation:
label the sun. which layer of the sun is #4?
Answers
Answer:
is D I guess; photosphere
3.15 mol of an unknown solid is placed into enough water to make 150.0 mL of solution. The solution's temperature increases by 19.21°C. Calculate ∆H, in kJ/mol, for the dissolution of the unknown solid. (The specific heat of the solution is 4.184 J/g･°C and the density of the solution is 1.20 g/mL).
Answers
Hope this helps!!!! :)
PLEASE ANSWER True or False: When adding reactions together to get a desired reaction you must also add their enthalpies to get the enthalpy of that desired reaction.
Answers
Answer:
true
Explanation:
How many atoms are present in one formula unit of barium acetate, Ba(C2H302)2?
Answers
Answer:
i think 15
Explanation:
Answer: About Barium Acetate
All metallic acetates are inorganic salts containing a metal cation and the acetate anion, a univalent (-1 charge) polyatomic ion composed of two carbon atoms ionically bound to three hydrogen and two oxygen atoms (Symbol: CH3COO) for a total formula weight of 59.05. Hopefully i helped
Explanation:
Is this statement true or false?
Gymnosperms reproduce using seeds, but angiosperms do not.
Answers
Answer:
FALSE!
Explanation:
Gymnosperms do use seeds but are exposed like the pine cones of pines. Angiosperms still have seeds, however, they flower or fruit.
Answer:
False
Explanation:
An atom or ion has 41 neutrons, 36 protons, and 36 electrons. Identify the clement symbol, and determine the mass
number and charge for this atom or ion.
Answers
The atom is krypton and its symbol is Kr.
the mass number is 41 + 36 = 77
its charge is 0 as it is a noble gas.
What is the vapor pressure of CH3COOH and 90*C?
Answers
Answer:
40.kPa hope this helps....
A solution containing 1.50 mM ethanol and 2.40 mM methanol gave peak areas of 1487 and 3544, respectively. Subsequently, 2.00 mL of 3.2 mM methanol was added to a 7.00 mL unknown ethanol and diluted to 10.00 mL. The final solution gave peak areas of 6235 and 4487 for ethanol and methanol, respectively. Calculate the concentration of ethanol in the original unknown.
Answers
Answer:
8.99mM is the concentration of ethanol in the original unknown.
Explanation:
In chromatography, the peak areas of compounds are proportional to its concentration. The ratio of Area/Concentration for ethanol and methanol is:
Ethanol = 1487 / 1.50mM = 991,33 mM⁻¹
Methanol = 3544 / 2.40mM = 1476.67mM⁻¹
The concentration of ethanol in the diluted solution is:
6235 / 991.33mM⁻¹ = 6.29mM
The original solution was diluted from 7mL to 10mL, the concentration of the original solution is:
6.29mM * (10mL / 7mL) =
8.99mMThe process of shedding an outgrown exoskeleton.
Answers
Answer:
Mouthing is the answer to your question
A 25.0 mL sample of an acetic acid solution is titrated with a 0.175 M NaOH solution. The equivalence point is reached when 37.5 mL of the base is added. The concentration of acetic acid in the sample was ________ M. A 25.0 mL sample of an acetic acid solution is titrated with a 0.175 M NaOH solution. The equivalence point is reached when 37.5 mL of the base is added. The concentration of acetic acid in the sample was ________ M. 0.175 0.119 0.365 0.263 none of the above
Answers
First of all, let's write the equation of the reaction.
CH₃COOH + NaOH ⇒ CH₃COONa + H₂O
The formula to be used here is CaVa/CbVb = na/nb
where Ca is the concentration of the acid (?)
Cb is the concentration of the base (0.175M)
Va is the volume of the acid (25 mL)
Vb is the volume of the base (37.5 mL)
na is the number of moles of acid (1)
nb is the number of moles of base (1)
Ca × 25/0.175 × 37.5 = 1/1
Ca = 0.175 × 37.5 × 1 /25 ×1
Ca = 0.263 M
The concentration of the acid in the sample was 0.263 M
Answer:
= 0.2625M ≅ 0.26M (2 sig figs)
Explanation:
HOAc + NaOH => NaOAc + H₂O
25ml (Molarity of HOAc) =\ 37.5ml(0.175M NaOH)
Molarity of HOAc = 37.5ml(0.175M NaOH)/25ml
= 0.2625M ≅ 0.26M (2 sig figs)
Methane is combusted with Oxygen to produce Carbon Dioxide and Water. How many grams of oxygen are required to react with 55 grams of
Methane?
A.55 g
B.110 g
C.165 g
D.220 g
Answers
Air movement can affect how quickly evaporation occurs.
O True
O False
Answers
It is device used to measure thee temperature of food/fish
Answers
At what temperature will 1.50 moles of nitrogen exert a pressure of 1.072 atm in a 20.0 L cylinder?
238 K
0.00574 K
337 K
174 K
Answers
Answer:
174 K
Explanation:
To answer this question we will use the PV=nRT formula, where:
P = 1.072 atmV = 20.0 Ln = 1.50 molR = 0.082atm·L·mol⁻¹·K⁻¹T = ?We input the data given by the problem:
1.072 atm * 20.0 L = 1.50 mol * 0.082atm·L·mol⁻¹·K⁻¹ * TAnd solve for T:
T = 174 KMeaning the correct answer is the fourth option, 174 K.
How many joules are needed to heat 20.0 g of Au from 10°C to 50°C?
show work
Answers
Answer:
297 J
Explanation:
The key to this problem lies with aluminium's specific heat, which as you know tells you how much heat is needed in order to increase the temperature of 1 g of a given substance by 1∘C.
In your case, aluminium is said to have a specific heat of 0.90Jg∘C.
So, what does that tell you?
In order to increase the temperature of 1 g of aluminium by 1∘C, you need to provide it with 0.90 J of heat.
But remember, this is how much you need to provide for every gram of aluminium in order to increase its temperature by 1∘C. So if you wanted to increase the temperature of 10.0 g of aluminium by 1∘C, you'd have to provide it with
1 gram0.90 J+1 gram0.90 J+ ... +1 gram0.90 J10 times=10×0.90 J
However, you don't want to increase the temperature of the sample by 1∘C, you want to increase it by
ΔT=55∘C−22∘C=33∘C
This means that you're going to have to use that much heat for every degree Celsius you want the temperature to change. You can thus say that
1∘C10×0.90 J+1∘C10×0.90 J+ ... +
electronic configuration [Ne]3s2 3p6
Answers
Plz help Need Answer Quick
Answers
Answer:
The correct answer is - [tex]\frac{P}{4}[/tex].
Explanation:
By the ideal gas equation is PV=nRT, the relation between pressure and volume can be drive if the temperature remains constant:
At constant temperature, for a fixed amount of gas, P∝
so the pressure is inversely proportional to volume. Therefore, if the volume is increased in this condition the pressure will decrease in the same manner and A decrease in the volume will lead to an increase in pressure.
Volume increased here = four times = 4V
pressure is P will decrease four times = P/4
What is the phase label on CI?
A. aq
B.
C. e
D. g
E. s
Answers
Answer:
Pubic hair smells bad
Explanation:
A typical coal-fired electric generating plant will burn about 3 metric tons of coal per hour. Most of the coal burned in the United States contains 1 to 4 % by weight sulfur in the form of pyrite, which is oxidized as the coal burns: 4FeS2(s) 11 O2(g) 2 Fe2O3(s) 8 SO2(g) Once in the atmosphere, the SO2 is oxidized to SO3, which then reacts with water in the atmosphere to form sulfuric acid: SO3(g) H2O(l) H2SO4(aq) If 61.7 metric tons of coal that contains 1.20 % by weight S is burned and all of the sulfuric acid that is formed rains down into a pond of dimensions 397 m x 258 m x 5.64 m, what is the pH of the pond
Answers
Answer:
the pH of the pond is 4.0963
Explanation:
Given the data in the question;
4FeS₂(s) + 11O₂(g) ------> 2Fe₂O₃(s) + 8SO₂(g)
and oxidation of sulfur dioxide to trioxide
SO₃(g) + H₂O(l) --------> H₂SO₄(aq)
given that; coal = 61.7 metric tons = 61700 kg
1.20 % by weight S, therefore mass of sulfur in coal will be;
⇒ 61700 × 1.20% = 740.4 kg
moles of sulfur = (740.4 × 1000 g) / 32 g/mole = 23,137.5 moles
moles of so₂ produced
= same moles of so₃ and same moles of H₂SO₄ = 23,137.5 moles
volume of pond = 397 m x 258 m x 5.64 m = 577,682.64 m³ = 577682640 L
Molarity = moles / volume = 23,137.5 / 577682640 = 4.0052 × 10⁻⁵ M
now each mole of H₂SO₄ will give 2 moles of H⁺
[H⁺] = 2 × 4.0052 × 10⁻⁵ = 8.0104 × 10⁻⁵ M
pH = -log[H⁺]
pH = -log [ 8.0104 × 10⁻⁵ M ]
pH = 4.0963
Therefore, the pH of the pond is 4.0963
Which is NOT a goal of the United Nations?
A. Maintain World Peace
B. Fight
C. Discuss Issues
D. Cooperation
Answers
Answer:
B.Fight...............