DESPERATE WILL GIVE BRAILIST
Which of the following is NOT an agent of change in the rock cycle?
A. Cooling and crystallization
B. Weathering and erosion
C. Cementation and compaction
D. Drying and decaying

Answers

Answer 1

Answer:

A

Explanation: I don't think I ever heard of Crystalization being apart of the rock Cycle but I could be wrong hope this helps


Related Questions

A student kicks a football vertically upwards, causing the football to reach a maximum height of 40.0m before falling back to the ground. Determine all unknowns and answer the following questions. Neglect drag and the initial height and horizontal motion of the football.
A) With what speed was the football kicked?
B) What was the football's total flight time?

Answers

Answer:

A. 28 m/s

B. 5.72 s

Explanation:

The following data were obtained from the question:

Maximum height (h) = 40 m

Acceleration due to gravity (g) = 9.8 m/s²

A. Determination of the initial velocity.

Maximum height (h) = 40 m

Acceleration due to gravity (g) = 9.8 m/s²

Velocity at maximum height (v) = 0 m/s

Initial velocity (u) =.?

v² = u² – 2gh (Ball is going against gravity)

0² = u² – (2 × 9.8 × 40)

0 = u² – 784

Collect like terms

0 + 784 = u²

784 = u²

Take the square root of both side

u = √784

u = 28 m/s

Thus, the ball was kicked with a velocity of 28 m/s

B. Determination of the time of flight.

We'll begin by calculating the time taken to reach the maximum height. This can be obtained as follow:

Velocity at maximum height (v) = 0 m/s

Initial velocity (u) = 28 m/s

Time taken to reach the maximum height (t) =?

v = u – gt (Ball is going against gravity)

0 = 28 – 9.8t

Rearrange

0 + 9.8t = 28

9.8t = 28

Divide both side by 9.8

t = 28/9.8

t = 2.86 s

Finally, we shall determine the the time of flight as follow:

Time taken to reach the maximum height (t) = 2.86 s

Time of flight (T) =?

T = 2t

T = 2 × 2.86

T = 5.72 s

Therefore, the time of flight for the ball is 5.72 s

Tell me a model that scientist have revised? Explain how it was changed.

Answers

An example can be any kind of yew technology. Provide information and how it was changed from any older sort.

While hiking in the mountains, you see a mountain lion. If you were to react as the Cannon–Bard theory of emotions proposes, which sequence of events would characterize your response? Group of answer choices You would experience physiological changes and a feeling of fear simultaneously. You would feel fear followed by physiological changes. You would experience physiological changes followed by fear. You would experience physiological changes and context appraisal followed by fear

Answers

Answer:

You would experience physiological changes and a feeling of fear simultaneously.

Explanation:

Cannon–Bard theory of emotions can as well be regarded as Thalamic theory of emotion, whenever the body experience a stimuli, a message will be sent to the brain by the Thalamus then there will be emotions as a result of this a physiological reaction such as trembling, sweating and others would follows. The theory stressed that physical reaction doesn't depends on emotional reaction.

In the case of hiking in the mountains, and one see a mountain lion. If one were to react as the Cannon–Bard theory of emotions proposes, the sequence of events that would characterize One's response is one would experience physiological changes and a feeling of fear, because a message is send to the brain by the Thalamus, then emotion set in and physiological reaction, which explains Cannon–Bard theory.

we know we have exerted a force even when we have no work done​

Answers

This is a true statement......

On release 1, a student releases a cart from the top of a ramp, such that the cart travels 190cm before hitting the stopper. The cart increases speed steadily and reaches the bottom of the ramp in 4.00s. What was the magnitude of the cart's acceleration on release 1?

Answers

Answer:

0.2375m/s²

Explanation:

Given

S = 190cm = 1.9m

initial velocity u = 0m/s

Time t = 4.00s

Required

acceleration

Using the equation of motion

S = ut + 1/2at²

Substitute

1.9 = 0+1/2a(4)²

1.9 = 8a

a = 1.9/8

a = 0.2375m/s²

The magnitude of the cart's acceleration is 0.2375m/s²

What shape must you make with a wire in a circut to have that current generate a magnetic field that is identical to the magnetic field produced by a normal bar magnet?
a
A straight line
b
An oval
c
A square
d
A coil

Answers

Answer:

The correct option is;

d. A coil

Explanation:

When a wire, which is an electric conductor is formed into the shape of a coil, and current is allowed to flow through the wire coil, a magnetic field is generated

The magnetic field generated by the electromagnetic coil has direction that consists of flux emanating from one end of the coil and entering the coil from the other end, similar to that of the magnetic field produced by a normal bar magnet.

Answer:

The maximum speed an object can fall in the presence of air resistance

Newton's third law

A coil

A crate is being pushed with a force of 75 N, if the resulting acceleration of the crate is 3 m/s? what is the
mass of the crate?

Answers

Answer:

The answer is 15 kg

Explanation:

The mass of the crate can be found by using the formula

[tex]m = \frac{f}{a} \\ [/tex]

f is the force

a is the acceleration

From the question we have

[tex]m = \frac{75}{3} \\ [/tex]

We have the final answer as

15 kg

Hope this helps you

what are these things called​

Answers

Wavelength and crest

Hope I helped

4 facts about light waves

Answers

ray of light travels very fast. The speed of light in space is approximately 300 million metres per second. Light is a kind of energy that can move in waves and it is made up of a flow of small particles of energy called photons. A ray of light travels very fast.

Is the moon accelerating?

Answers

Answer:

The Earth's gravity keeps the Moon orbiting us. ... This means gravity makes the Moon accelerate all the time, even though its speed remains constant.

Yes it is always accelerating due to gravity

a sample o aluminum is put in 10.5 mL of water. if the water rises to 13.5 mL when the aluminum is added, what is the density of the aluminum if it has a mass of 8.1 g

Answers

Answer:

The answer is 2.7 g/mL

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\ [/tex]

volume = final volume of water - initial volume of water

volume = 13.5 - 10.5 = 3 mL

From the question we have

[tex]density = \frac{8.1}{3} \\ [/tex]

We have the final answer as

2.7 g/mL

Hope this helps you

If the coefficient of sliding friction between a 25 kg crate and the floor is 0.45, how much force is required to move the crate at a constant velocity across the floor?

Answers

At constant velocity, the crate would be in equilibrium, so that Newton's second law tells us

p + (-f ) = 0

where p and f denote the magnitudes of the added pushing force and friction force, respectively.

The friction force is proportional to the normal force by a factor of µ, the coefficient of friction. There's no vertical movement going on, so Newton's second law says

n + (-w) = 0

where n and w are the magnitude of the normal force and the weight of the crate, respectively.

Compute n :

n = w = (25 kg) (9.80 m/s²) = 245 N

Use this and µ = 0.45 to compute f :

f = µ n = 0.45 (245 N) = 110.25 N

Solve for p :

p + (-110.25 N) = 0

p = 110.25 N ≈ 110 N

The force i.e required to move the crate at a constant velocity across the floor is 110 N.

At the same velocity, the crate should be in equilibrium, so as per Newton's second law, the following formula should be used:

p + (-f ) = 0

p means the magnitudes of the added pushing force

f means the friction force

Calculation of the force:

n = w = (25 kg) (9.80 m/s²) = 245 N

Now

force should be

= µ n

= 0.45 (245 N)

= 110.25 N

Learn more about the force here: https://brainly.com/question/24848856

Science is the study of the natural world through blank and blank

Answers

Answer:

biology. hope this helps

Newton's First Law of
Motion

Answers

Answer:

Newton's first law states that every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force

Answer:

An object in motion will stay in motion unless acted on by an unbalanced force.

An object at rest will stay at rest unless acted on by an unbalanced force.

An object in motion will stay in motion, and an object at rest will stay at rest unless acted on by an unbalanced force

(There are three parts to Newton’s First Law of Motion)

does anybody know?? Please help

Answers

Step 1;
Resolve or break the motion into horizontal and vertical components along the x- and y- axes.

Step 2;
Treat the motion as two independent one-dimensional motions, one horizontal and the other vertical

Step 3;
Solve for the unknowns in two separate motions—one horizontal and one vertical

Step 4; Recombine the two motions to find the total displacements and velocity v.

You are writing a story on a table. What physical properties would you want your table to have?

Answers

Answer:The Table should be smooth, hard, and large

Explanation:

If the deflection of a spring is doubled, then how much does the force change?

Answers

Answer:

The force is doubled as well.

Explanation:

If you double the spring then the force doubles as well.

If the deflection of the spring is doubled, the force exerted by the spring will also be doubled.

What is the Hooke's Law?

The relationship between the deflection of a spring and the force it exerts is described by Hooke's Law, which states that the force exerted by a spring is directly proportional to its deflection. Mathematically, this can be expressed as:

F = kx

where F is the force exerted by the spring, x is the deflection of the spring, and k is the spring constant, which represents the stiffness of the spring.

If we double the deflection of the spring, then x becomes 2x, and the force exerted by the spring becomes:

F = k(2x) = 2kx

Thus, if the deflection of the spring is doubled, the force exerted by the spring will also be doubled (assuming the spring constant remains constant).

Learn more about the deflection here:

https://brainly.com/question/28334742

#SPJ6

How does the sun works

Answers

Answer:

The sun works by nuclear fission, because there is so much pressure, it makes it vErY hOt. ( About 10,340 degrees Fahrenheit to be exact, or 5,726 degrees Celsius* )

Explanation:

Hope this helps! <3

Discuss the significance of the Tropic of Cancer, the Equator, and the
Tropic of Capricorn as they relate to the seasons.

Answers

Answer:

im a capricorn may i?

Explanation:

If a car moves with a constant acceleration, can you conclude that there are no forces acting on it?

Answers

There are forces acting on it

An object is moving to the left. In which direction would a force need to be exerted to make this object slow down?

Answers

Answer:

left

Explanation:

When a force is applied in the opposite direction of motion, it opposes the motion of the object, causing its speed to decrease.

What is force?

A force is an influence in physics that can change the motion of an object. A force can cause a mass object to change its velocity, or accelerate.

Intuitively, force can be described as a push or a pull. A force is basically a vector quantity as it has both magnitude and direction.

The term "force" has a specific meaning in science. At this level, it is perfectly acceptable to refer to a force as a push or a pull.

Another object applies a force to another. The concept of a force is not restricted to living or non-living things.

To slow a moving object, apply force in the opposite direction to the direction of motion.

Thus, the force should be applied from left to slow down the object.

For more details regarding force, visit:

https://brainly.com/question/13191643

#SPJ2

What is the difference between EMS waves and mechanical waves? Select all that apply. * Mechanical wave require a medium to travel on. EMS waves do NOT require a medium to travel on. EMS waves do NOT require a medium to travel on but, they can use a medium to travel on.

Answers

Answer:

EMS waves require no material medium to travel

Explanation:

Here, we want to consider the difference between mechanical waves and EMS waves

When we talk of EMS waves, we mean electromagnetic radiation waves .

Example of EMS waves include radio waves , x-rays etc

These kind of waves require no material medium to travel and this is the main difference they have with mechanical waves

How many peanut butter cups does Benny have if he has 2 times as many as Karen. Karen has 80 peanut butter cups.

Answers

Answer:

160 peanut butter cups

Explanation:

80 * 2 = 160

Answer:

160

Explanation:

if benny has 2x more than karen and karen has 80 you would multiply 80 by 2 to get 160. therefore benny has 160. hope that helps

Michael is training to join the Army and runs to the left with a constant
velocity of 2 m/s. If he starts at Om, what is his position after 5 seconds?
Don't forget units and directions if appropriate.
Your answer

Answers

Answer:

[tex]10 \: m.[/tex]

Explanation:

[tex]his \: position \:is \: his \: distance \: from \: the \: \\ point \: of \: motion \: and \: is \: given \: by : \\ v = \frac{s}{t} \\ s = vt =2 \times 5 \\ s = 10 \: m.[/tex]

El elevador hidráulico de un garaje funciona mediante una prensa hidráulica conectada a una toma de agua de la red urbana que llega a la máquina con una presión de 5x10 5 N/m 2 . Si el radio del émbolo es de 20 cm y el rendimiento es de un 90% ¿Cuál es el valor en toneladas de la carga que como máximo puede levantar el elevador.

Answers

Answer:

El elevador puede levantar 5.76 toneladas de carga máxima.

Explanation:

De acuerdo a la ley de Pascal:

[tex] p_{1} = p_{2} [/tex]          

[tex] \frac{F_{1}}{A_{1}} = \frac{F_{2}}{A_{2}} [/tex]   (1)

En donde:

F: es la fuerza

P: es la presión

A: es el área

Sabiend que p₁ = 5x10⁵ N/m², tenemos que F₂ es:                              

[tex] F_{2} = p_{1}A_{2} [/tex]       (2)

El área del embolo viene dada por el área de una circunferencia:  

[tex] A_{2} = \pi r^{2} [/tex]    (3)

Introduciendo la ecuación (3) en la ecuación (2) tenemos:

[tex] F_{2} = p_{1}\pi r^{2} = 5 \cdot 10^{5} N/m^{2} \pi (0.20 m)^{2} = 62832 N [/tex]

Dado que el rendimiento es del 90%, la fuerza máxima es:

[tex] F_{2} = 62832 N*0.90 = 56549 N [/tex]

Ahora sabemos que la fuerza del elevador para levantar la carga máxima  es 56549 N y para encontrar el valor de toneladas de la carga máxima que puede levantar el elevador, debemos encontar la fuerza necesaria para levantar 1 tonelada:          

[tex] F = mg = 1000 kg*9.81 m/s^{2} = 9810 N [/tex]  

Finalmente, si para levantar 1 tonelada se debe aplicar una fuerza de 9810 N, y la fuerza total es igual a 56549 N, el numero de toneladas que puede levantar el elevador es:      

[tex] N = \frac{F_{2}* 1 ton}{F} = \frac{56549 N* 1 ton}{9810 N} = 5.76 ton [/tex]

Por lo tanto, el elevador puede levantar 5.76 toneladas de carga máxima.

Espero que te sea de utilidad!

PLEASE HELP!! ILL MARK BRAINLYEST!!

The Law of Conservation of Matter is a basic principle in studying chemical reactions.


True
False

Answers

Answer:it is false

Explanation:

help pls ill give points​

Answers

Answer:

The answer Is erosion!

Hope you do Great!

Explanation:

Answer:

weathering

Explanation:

PLEASE HELP ME!


Which statement about nuclear reactions is NOT true?
a.
Nuclear power plants use fission of uranium.
b.
In fission, the total mass of the reactants equals the total mass of the products.
c.
In fission, nuclei are split, and in fusion, nuclei are combined.
d.
Energy as heat and light in the sun are generated by hydrogen fusion reactions.

Answers

Answer:

b.  In fission, the total mass of the reactants equals the total mass of the products.

Explanation:

In a nuclear reaction, the total mass of the reactants does not equal to the total mass of the products.

This is because mass is converted to energy in a nuclear reaction.

It is true that nuclear power plants use fission. Uranium is the fuel in most reactors used to generate electricity. During nuclear fission, an unstable nucleus is split and in fusion, atoms are combined together. Heat and light is produced in the sun which are generated by hydrogen fusion reactions.

A pitcher throws a baseball horizontally with a speed of 42 m/s. If the pitcher throws the baseball from a height of 1.25 meters, what is the resultant velocity of the ball right before it hits the ground? Include direction (angle).

Answers

Answer:

v = 42.28 m/s

Explanation:

It is given that,

The horizontal speed of a baseball, [tex]u_x=42\ m/s[/tex]

The pitcher throws the baseball from a height of 1.25 meters, h = 1.25 m

Firstly finding t i.e. the stone takes to reach the ground. Using second equation of motion as follows :

[tex]d=ut+\dfrac{1}{2}at^2[/tex]

a = -g and u = 0

[tex]d=-\dfrac{1}{2}gt^2\\\\t=\sqrt{\dfrac{-2d}{g}} \\\\t=\sqrt{\dfrac{-2\times 1.25}{9.8}} \\\\t=0.5\ s[/tex]

Vertical component of the velocity is :

[tex]v_y=gt\\\\v_y=9.8\times 0.5\\\\v_y=4.9\ m/s[/tex]

Resultant velocity,

[tex]v=\sqrt{v_x^2+v_y^2} \\\\v=\sqrt{42^2+4.9^2} \\\\v=42.28\ m/s[/tex]

So, the resultant velocity of the ball before it hits the ground is 42.28 m/s.

Answer:

42.28 m/s

Explanation:

An elephant walks due east for a distance of 7.9 km, turns around and then goes due west for 1.9 km, and finally turns around again and heads 3.6 km due east. What is the displacement traveled by the elephant in meters?

Answers

Answer:

The displacement traveled by the elephant is 9600 east

Explanation:

Displacement is defined as an object's change in position which is given by the difference between final and initial location of the object

The displacement of the elephant are, taking east as positive direction of motion;

1) 7.9 km east = + 7.9 km

2) 1.9 km west = -1.9 km

3) 3.6 km east = 3.6 km

The net (sum) displacement of the elephant, ∑Δx is given as follows;

∑Δx = 7.9 km - 1.6 km + 3.6 km = 9.6 km

Given that the sum of the displacement is positive and that 9.6 km = 9600 m, we have;

The displacement traveled by the elephant = ∑Δx =  9600 east.

Other Questions
YOU GET BRAINLY IF RIGHT PLUS 10 POINTS!!!!!!What are some of the social and psychological benefits of participating in team sports for kids? (Site 1)"By AOSSMSports participation in the United States has reached record levels, and high school-level sports participation continues to rise. In fact, the National Federation of State High School Associations estimates that more than 7.6 million high school students (over 55% of all students) played sports during the 2010-2011 academic year.As orthopaedic surgeons, we are all too familiar with injuries that can occur in sports. But the benefits far outweigh the potential for injury. Since we are wrapping up National Physical Fitness and Sports Month, the American Orthopaedic Society for Sports Medicine would like to focus on the many positive benefits of sports and encourage Americans to participate.The physical benefits of competitive sports are the most obvious. Much attention has been given to the role of sports and exercise in decreasing the rates of obesity in our nations youth. While lower body mass among athletes is certainly a desirable marker, it is not the only purported advantage of the regular exercise that comes with sports participation. Athletes experience lower rates of diabetes and high blood pressure, as well as improved cardiovascular and pulmonary function.However, the benefits of sports are not simply limited to physical health. Here are just a few reasons to consider playing sports or encouraging your children to play sports.Social BenefitsA study published in Pediatric and Adolescent Medicine reported that out of 14,000 high school athletes, the ones who regularly played sports were less likely to use drugs. Likewise, a survey performed by the National Household Survey of Drug Abuse showed that students who played sports were less likely to have smoked cigarettes or used drugs and were more likely to disapprove of others using them. Also, the Womens Sports Foundation has stated that female high school athletes are 80% less likely to become pregnant than non-athletes.Academic BenefitsStudies perfomed among students in multiple states including Wyoming, Iowa, and Colorado have shown that playing sports can actually increase success in the classroom. Various data demonstrate that athletes have higher grade point averages, higher standardized test scores, better attendance, lower dropout rates, and a better chance of going to college.Career BenefitsA survey of individuals at the level of executive Vice President of 75 Fortune 500 companies showed that 95% of them played sports in high school. While it might be hard to argue that sports participation could guarantee higher incomes, promotions, and better jobs, the leadership skills and development of teamwork, hard work, and determination might help prepare students to be leaders at work and in their communities later in life.While it is important for adults to be aware of the risks of injuries in various sports, both for themselves and for their kids, it is important to remember that there are many great reasons to play them as well! How are you encouraging your family and friends to get involved in sports?" What was one benefit of New Orleans location? Answered What is the mean for the set of data? 6, 7, 10, 12, 12, 13 what happened to the phanerozoic era Which detail supports the idea that robots will not take over medical jobs? Your instructor sees you buying games at a local store. What can she ask you? (2 points)Te gustar comer?Te gusta hablar?Te gusta leer?Te gusta jugar? Assuming that water is made of tiny little water molecules, would you say that water molecules are attracted to one another, repelled by one another, or are kind of neutral about each other? -attracted to one another-repelled by one another0kind of neutral about each other . Explain the difference between a discrete variable and a continuous variable. Choose the correct answer below. A. A discrete variable has observed values that are clustered in certain intervals, while a continuous variable has observed values that are evenly distributed throughout the distribution. B. A discrete variable has possible values that are separate numbers, while a continuous variable has possible values that form an interval. C. A discrete variable has infinitely many possible values, while a continuous variable is usually a count. D. A discrete variable has each observation belong to one of a set of distinct categories, while a continuous variable has observations that take numerical values that represent different magnitudes of the variable. If 15 is 25% of a value, what's that value An airline charges $150 for a ticket and $20 for each bag.Which equation shows the relationship between the number of bags, b, and the total cost, c, for flying with this airline?A. b = 20c + 150B. b = 20 + 150cC. c = 200 + 150D. c = 20+ 1500 Need some help with this please and thank youuuu What is The seventh manconnected to the prompt ? Karim wants to buy a shirt that normally sells for $46.50. It is on sale for One-third off. How much does Karim need to pay to buy the shirt on sale?A.) $15.50B.) $22.50C.) $31.00D.) $41.50PLEASE HELP ME ASAP Is .083 greater than .81 HELP NEED ANSWER ASAP!!!!!!!!! pls help you will get brainliest but you have to show steps If an object that is dropped from the roof of a building takes 12 seconds to hit the ground, howtall is the building? It's the inequalitlos Matching Gemel How many moles are in 2.5 * 10^20 iron atoms? Clare mixes 2 cups of water with cup of orange juice concentrate.Han mixes 1 cups of water with cup of orange juice concentrate.Whose orange juice mixture tastes stronger? Explain or show your reasoning.