Answer:
The percent dissociation would increase
Explanation:
Percent dissociation is the ratio of amount dissociated to the initial concentration.
Decreasing the concentration of the solution leads to an increase in percent dissociation.
A tank contains 10 liters of pure water. A solution of an unknown, but constant concentration of salt is flowing in at 0.5 liters per minute. The water is mixed well and drained at 1 liter per minute. After 20 minutes there are 10 grams of salt in the tank. (i) Give an adequate mathematical model for this scenario. Explain what each of your variables means. (ii) What is the concentration of the incoming salt solution
Answer:
i) ∴∫[tex]\frac{dA}{A}[/tex] = ∫ [tex]\frac{-1}{10} dt[/tex] ------ ( 1 )
ii) C = 4.303
Explanation:
Given data:
water in tank = 10 liters
concentration of salt flowing in = 0.5 liters/min
10 grams of salt is left in tank after 20 minutes
mixed water is drained at 1 liter per minute
i) Adequate mathematical model for the scenario
lets assume ; A( t ) amount of salt after t minute
A( t ) = 10grams where t = 20 minutes
differentiate A(t)
dA / dt = ( rate in ) - ( rate out )
= 0.5 * 0 - A/10
∴∫[tex]\frac{dA}{A}[/tex] = ∫ [tex]\frac{-1}{10} dt[/tex] ------ ( 1 )
ii) hence; In A = [tex]\frac{-1}{10} t + C[/tex] ----- ( 2 )
at t = 20 , A = 10grams
find C = In 10 + 2
= 2.303 + 2 = 4.303
back to ( 2 )
In A = [tex]\frac{-t}{10} + 4.303[/tex]
∴ A = e [tex]\frac{-t}{10} + 4.303[/tex]
The yield for a particular well is 280 gallons per minute (gpm). Of the drawdown for this well is 23 feet, what is the specific yield in gpm/ft?
Answer:
[tex]Y=12.2 \frac{gpm}{ft}[/tex]
Explanation:
Hello!
In this case, since we can find that the well produces 280 gpm, and the given drawdown is 23 ft, we need to divide 280 by 23 to obtain the yield in gmp/ft as shown below:
[tex]Y=\frac{280gpm}{23ft} \\\\Y=12.2 \frac{gpm}{ft}[/tex]
Best regards!
Write the line notation for a cell in which the cell reaction is as follow
H2 + I2 = 2 HI
Answer:
I2(g)/I^-(aq)//H2 (g)/H^+(aq)
Explanation:
Let us remember that in every redox reaction, a specie is oxidized and a specie is reduced.
This means that one specie looses electrons while the other species gains electrons.
Considering the overall reaction; H2 + I2 = 2 HI
Oxidation half equation;
H2 (g) ------> 2H^+(aq) + 2e
Reduction half equation;
I2(g) + 2e ------> 2I^-(aq)
Line notation;
I2(g)/I^-(aq)//H2 (g)/H^+(aq)
What happens to algae when the temperature in the ocean becomes too hot?
O The algae are susceptible to infection.
O The algae become pale.
O The algae photosynthesize faster.
O The algae lose their ability to photosynthesize
Answer:
The algae lose their ability to photosynthesize.
Explanation:
Because the algae turn the energy from the sunlight into chemicals.
Hoped this helped!
I'LL MARK YOU BRAINLIEST! Please help me balance these chemical reactions. (I'M NOT IN COLLEGE, I'M IN 10TH GRADE) Please help me
Answer:
1. H2 + Cl2 => 2HCl
2. Na2S + 2HCl => 2NaCl + H2S
3. 6HCl + 2Al => 2AlCl3 + 3H2
4. C3H8 + 5O2 => 3CO2 + 4H2O
5. C6H12O6 + 6O2 => 6CO2 + 6H2O
6. 4C12H23O11 + 49O2 => 48CO2 + 46H2O
7. 4NH3 + 7O2 => 4NO2 + 6H2O
8. 2Mg + 02 => 2MgO
hope it helps
La fórmula molecular del pentano y del nonano son
Nose jajajajajaj si mr ayudas te ayudo
Please help me I need this really quick
Answer:
The answer is (a)
.
.
......................................................................
. Which state of matter has a defined volume but no defined shape?
HELPPPP PLEASE FAST
Answer:
liquid
Explanation:
it's not plasma, solid, or gas
so I think liquid
Which of the following are true about an atom? Choose all that apply.
Answer:
Explanation:
Atoms are the building blocks of matter.
They are the smallest particles of an element that still have the element's properties.
All atoms are very small, but atoms of different elements vary in size.
Three main types of particles that make up all atoms are protons, neutrons, and electrons.
A sample of 0.600 mol of a metal M reacts completely with excess fluorine to form 46.8 g of MF2.?
a) How many moles of F are in the sample of MF2 that forms? (1.20 mol F)
b) How many grams of M are in this sample of MF2?
c) What element is represented by the symbol M? (Ca)
Answer:
See Explanation
Explanation:
Given:
moles M = 0.600 mole
moles F = excess (for rxn stoichiometry)
Formula Weight (F.Wt.) of F = 19 grams/mole (from Periodic Table)
Yield in grams = 46.8 grams (assuming theoritical yield)
Rxn: M + F₂ => MF₂
0.600mol Excess 0.600mol (1:1 rxn ratio for M:MF₂)
a. moles of F in MF₂ = 2(0.600) moles F = 1.2 moles F
b. mole weight MF₂ = 46.8g/0.600mol = 78g/mole
F.Wt. MF₂ = F.Wt. M + 2(F.Wt. F)
=> mass M = F.Wt. M = [F.Wt. MF₂ - 2(F.Wt. F)] = 78g/mol. - 2(19g/mol.)
= (78 - 38) grams/mole = 40 grams/mole
c. Calcium (Ca) has F.Wt. = 40 grams/mole (compared to Calcium on Periodic Table.
From the question, the metal is the limiting reactant and must be used to obtain the required results which are;
a) There are 1.20 mol F in MF2.
b) There are 40g of M in MF2.
c) M is calcium.
From the reaction equation;
M + F2 ----> MF2
Since the reaction is 1:1, 0.600 mol of MF2 is formed
Note that 1 mole of MF2 contains two moles of F and one mole of M
Hence, number of moles of F in MF2 = 2 * 0.600 mol = 1.20 mol F
Since 1 mole of M is contained in MF2, there are 0.600 moles of M in MF2.
If 1 mol of M forms 1 mole of MF2
And, 0.600 mol of M form 0.600 mol of MF2
Number of moles of MF2 = mass/molar mass
Number of moles of MF2 = 0.600 mol
Mass of MF2 formed = 46.8 g
Molar mass of MF2 = mass/Number of moles of MF2
Molar mass of MF2 = 46.8 g/0.600 mol
Molar mass of MF2 = 78 g/mol
Molar mass = Sum of Relative atomic mass of component atoms.
Hence;
78 = M + 2(19)
M = 78 - 2(19)
M = 40 g
The element must be calcium
Learn more: https://brainly.com/question/17275626
help! help! plz give 4 different between orbit and orbital
Answer:
Differences between Orbit and Orbitals
Orbit
An orbit is the simple planar representation of an electron.
It can be simply defined as the path that gets established in a circular motion by revolving the electron around the nucleus
The shape of molecules cannot be explained by an orbit as they are non-directional by nature.
An orbit that is well-defined goes against the Heisenberg principle.
Orbital
An orbital refers to the dimensional motion of an electron around the nucleus in a three-dimensional motion.
An orbital can simply be defined as the space or the region where the electron is likely to be found the most.
The shapes of the molecules can be found out as they are directional by nature.
An ideal orbital agrees with the theory of Heisenberg’s Principles.
50 POINTS
Which of the following correctly describes a compound?
A. The atoms are bonded together, and the compound has different physical and chemical properties than the individual elements.
B. The atoms have no set ratio for how the atoms can combine, and they are not chemically bonded together.
C. The atoms can only combine in fixed ratios, and they retain their individual chemical and physical properties.
D. The atoms retain their individual chemical properties, and they can only be separated from each other by a chemical change.
Answer: A chemical compound can be described as substance composed of atoms from more than one element held together by chemical bonds in a fixed stoichiometric proportion. A compound has different physical and chemical properties from its constituent elements.
For example : compound water is made up of H and O bonded together and it has different properties from O and H.
Thus, among the given options, the one coreectly describing a compound is
a) The atoms are bonded together, and the compound has different physical and chemical properties than the individual elements.
Determine the empirical and molecular formulas of the mandelic acid
Answer:
Both empirical and molecular are C₈H₈O₃.
Explanation:
Hello!
In this case, according the attached picture, it is possible to figure out the molecular formula of the mandelic acid by counting each carbon, hydrogen and oxygen in the molecule.
In such a way, we can see the presence of eight carbon atoms, eight hydrogen atoms and three carbon atoms; thus, the molecular formula is:
C₈H₈O₃
Furthermore, since the empirical formula is the smallest representation of the molecular formula when we are able to simplify it, we evidence no simplification is possible, consequently, the empirical formula equals the molecular one.
Best regards!
Describe how moving the mountain lions could affect the ecosystem
Answer:
If Mountain lions are removed from a habitat/ecosystem, their prey will overpopulate, which may lead to extinctions on the pray of the secondary consumers. ex. A mountain lion would eat rabbits who eat berries, if there are no mountain lions to kill the rabbits, then the berries may be scarce
Explanation:
bc i know everthing
You and your family are on vacation in the mountains. You are trying to locate the campsite where you will be staying but you cannot get a signal. What is one reason why your GPS is not responding.
Answer:
A satellite may be malfunctioning.
Line of sight may be blocked.
low batteries in your GPS.
An aqueous solution of nitric acid is standardized by titration with a 0.174 M solution of barium hydroxide. If 13.9 mL of base are required to neutralize 28.7 mL of the acid, what is the molarity of the nitric acid solution?
Answer:
Explanation:
2HNO₃ + Ba( OH)₂ = Ba( NO₃ )₂ + 2H₂O .
2 mole 1 mole
13.9 mL of .174M barium hydroxide contains .0139 x .174 moles
= 2.42 x 10⁻³ moles .
1 mole of barium hydroxide reacts with 2 moles of nitric acid
2.42 x 10⁻³ moles of barium hydroxide will react with 2 x 2.42 x 10⁻³ moles of nitric acid
= 4.84 x 10⁻³ moles
4.84 x 10⁻³ moles of nitric acid is contained in 28.7 mL
molarity of nitric acid = 4.84 x 10⁻³ / 28.7 x 10⁻³
= .169 M .
Prokaryotic cell division is a___________process involving onc chromosom.
A. simple
B. complex
C. unusual
Answer:
It’s is a simple
Explanation:the prokaryotic cell involves a simple process which intern involves one chromosom
A hydrogen atom is removed from the first carbon atom of a butane molecule and is replaced by a hydroxyl group.
Required:
Draw the new molecule formed.
Answer:
See answer below
Explanation:
In this case, let's draw the butane molecule:
CH₃ - CH₂ - CH₂ - CH₃
According to what the exercise states, we removed an atom of hydrogen from the frist carbon. This could be any of the terminals. I'll grab the first from left to right.
CH₂⁺ - CH₂ - CH₂ - CH₃
When this happens, the atom of carbon is lacking one space and it forms a carbocation.
Followed this step, an hydroxile group replace the atom of hydrogen. The hydroxile is the OH, and when we have an alkane with an OH group in the molecule, we are actually converting this molecule into an alcohol, therefore the molecule formed is:
OH - CH₂ - CH₂ - CH₂ - CH₃Hope this helps
can someone please help me asap ill mark u brainlest
Answer:It is the ground state of NA
A small, rocky island is home to a community of organisms. They include birds,
insects, lichen, moss, shrubs, and small plants. Flooding during a storm damages the
ecosystem, except for the lichen and moss.
Two students observe the changes to the island community during and after the
storm. Chandra classifies the changes as primary succession, whereas Brenda
classifies them as secondary succession. Which argument is supported by the
evidence?
Brenda argument is supported.
Here moss and lichens are still there after the flood which will recolonize the colony once there.
What is primary successionPrimary succession is ecological succession that begins in essentially lifeless areas, such as regions in which there is no soil or where the soil is incapable of sustaining life.
What is secondary succession?It is a type of ecological succession in which plants and animals recolonize a habitat after a major disturbance such as a devastating flood, wildfire, landslide, lava flow, flood or human activity.
To know more about ecological succession here
https://brainly.com/question/12325701
#SPJ2
Ethane is a hydrocarbon with a formula of C2H6 . How many Carbon and Hydrogen atoms are contained within 3 molecules of ethane ?
Answer:
Within three molecules of Ethane, it would have 6 carbon, and 18 hydrogen atoms in it.
Explanation:
Name the compound AgF
Answer: Silver (I) fluoride molecule · AgF
Classification: Inorganic compound (Could be salt)
Ionic compound (Silver is a metal)
Valence of F (F must form an octet): 7
Valence of Ag: 11
Total valence electrons: 18
Molar mass: 126.87 g/mol
Explanation:
On the basis of the information above, a buffer with a pH = 9 can best be made by using
A pure NaH2PO4
B H3PO4 + H2PO4–
C H2PO4– + PO42–
D H2PO4– + HPO42–
E HPO42– + PO43
Answer:
D H2PO4– + HPO42–
Explanation:
The acid dissociation constant for [tex]\mathbf{H_3PO_4 , H_2PO^{-}_4 , HPO_4^{2-}}[/tex] are [tex]\mathbf{7\times 10^{-3}, \ \ 8\times 10^{-8} ,\ \ 5\times 10^{-13}}[/tex] respectively.
[tex]\mathbf{pka (H_3PO_4) = -log (7\times 10^{-3} )=2.2}[/tex]
[tex]\mathbf{pka (H_2PO_4^-) = -log (8\times 10^{-8} )=7.1}[/tex]
[tex]\mathbf{pka (HPO_4^{2-}) = -log (5\times 10^{-13} )=12.3}[/tex]
The reason while option D is the best answer is that, the value of pKa for both
[tex]\mathbf{H_2PO^{-}_4 ,\ \& \ HPO_4^{2-}}[/tex] lies on either side of the desired pH of the buffer. This implies that one is slightly over and the other is slightly under.
Using Henderson-Hasselbach equation:
[tex]\mathbf{pH = pKa + log \Big( \dfrac{HPO_4^{2-}}{H_2PO_4^-} \Big)}[/tex]
The compounds that are used for the formulation of the pH 9 buffer are [tex]\rm H_2PO_4^-\;and\;HPO_4^+[/tex]. Thus, option D is correct.
The buffers are the solutions of acids and base of appropriate pH, that are able to limit the change in pH in the reaction mixture.
Which compound is used for pH 9 buffer?The buffer pH is adjusted with the compounds that has been able to add base or acid to the solution.
For the formulation of buffer of specific pH, the acid and base solutions are required.
The compounds that are used for the formulation of the pH 9 buffer are [tex]\rm H_2PO_4^-\;and\;HPO_4^+[/tex], as they are able to provide acid and base to the solution.
Thus, option D is correct.
Learn more about buffers, here:
https://brainly.com/question/1423164
Write the word equation for
the reaction between sodium
hydrogen carbonate and
sulfuric acid.
Answer:
NaHCo3+Na2So4---Nna2So4+H2O+CO2
Answer:
sodium two sulphate+Carbondioxed gas +water
Scientists classify rocks mainly according to which feature?
their color
how they form
their hardness
where they are found
does warm air or cool air hold more humidity.
Answer:
warm
Explanation:
If 0.64 mol PCl5 is placed in a 1.0 L flask and allowed to reach equilibrium at a given temperature, what is the final concentration of Cl2 in the flask?
PCl5 (g)→ PCl3 (aq) + Cl2 (g) Kc= 0.47
Answer: The final concentration of [tex]Cl_2[/tex] at equilibrium is 0.36 M
Explanation:
Moles of [tex]PCl_5[/tex] = 0.64 mole
Volume of solution = 1.0 L
Initial concentration of [tex]PCl_5[/tex] = [tex]\frac{moles}{Volume}=\frac{0.64mol}{1.0L}=0.64 M[/tex]
The given balanced equilibrium reaction is,
[tex]PCl_5(g)\rightleftharpoons PCl_3(g)+Cl_2(g)[/tex]
Initial conc. 0.64 M 0M 0M
At eqm. conc. (0.64-x) M (x) M (x) M
The expression for equilibrium constant for this reaction will be,
[tex]K_c=\frac{[Cl_2]\times [PCl_3]}{[PCl_5]}[/tex]
Now put all the given values in this expression, we get
[tex]0.47=\frac{(x)\times (x)}{(0.64-x)}[/tex]
By solving the term 'x', we get :
x = 0.36
Thus, the final concentration of [tex]Cl_2[/tex] at equilibrium is x = 0.36 M
The concentration of Cl2 is 0.36M.
Number of moles of PCl5 = 0.64 mol
Volume = 1.0 L
Concentration of PCl5 = 0.64 mol/1.0 L = 0.64 M
The equation of the reaction is;
PCl5 (g)→ PCl3 (aq) + Cl2 (g)
I 0.64 0 0
C -x +x +x
E 0.64 - x x x
Kc = [PCl3] [Cl2]/[PCl5]
0.47 = x^2/0.64 - x
0.47(0.64 - x) = x^2
0.3 - 0.47x =x^2
x^2 + 0.47x - 0.3 = 0
x = 0.36 M
The concentration of Cl2 is 0.36M.
Learn more about concentration:https://brainly.com/question/1195122
A hormone can have different effects in different species?
A. True
B. False
C. Cannot be decided
Answer:
true
Explanation:
it is because hormone determines various factors
According to the graph, what is the instantaneous speed of the object at 5 seconds? *
Captionless Image
4 m/s
7 m/s
0.25 m/s
3 m/s
Answer:4m/s
Explanation:The reason why that the answer is because I am Smart.
Find the mass of 2.40 moles of CO. gas..