cameron drives his car 15 km north. He stops for lunch and then drives 12 km south. What is his displacement?

Answer:

[tex]tan^{-1}[/tex] ( 24.19 / 10.06 )

Explanation:

starting speed = 20m/s

direction = 41 degrees from due east

after 20 seconds

bus speed = 45m/s

direction = 56 degrees from due east

calculate the angle of the vector that represents the change in the velocity of the bus

change in velocity : ΔV = Vf - Vi

Vf = Vf ( cos βi + sinβj )

   = 45m/s ( cos 56 i + sin56 j )

   = 25.16 i  +  37.31 j

Vi = Vi ( cos ∝ i + sin ∝ j )

   = 20 m/s ( cos 41 i  + sin 41 i )

   = 15.10 i   +  13.12j

Hence the change in velocity ΔV (  Vf - Vi )

=  10.06 i  +  24.19 j

the angle in degrees ( ∅ ) = [tex]tan^{-1}[/tex] ( 24.19 / 10.06 )

Answer:

10389.6 J

Explanation:

Power is the rate of doing work with respect to time, its S.I unit is in watts but it can also be expressed in J/s. Power is calculated using the formula:

[tex]Power=\frac{energy}{time}[/tex]

Power is also the rate at which energy is used per second.

Energy is the capacity to do work and it is measured in joules (J).

Power = current × voltage = 7.4 A × 3 V = 22.2 W

[tex]Energy=power*time\\\\time=7.8\ min=7.8*60\ s=468\ s\\\\Energy=22.2*468\\\\Energy=10389.6\ J[/tex]

Complete question is;

a. Two equal sized and shaped spheres are dropped from a tall building. Sphere 1 is hollow and has a mass of 1.0 kg. Sphere 2 is filled with lead and has a mass of 9.0 kg. If the terminal speed of Sphere 1 is 6.0 m/s, the terminal speed of Sphere 2 will be?

b. The cross sectional area of Sphere 2 is increased to 3 times the cross sectional area of Sphere 1. The masses remain 1.0 kg and 9.0 kg, The terminal speed (in m/s) of Sphere 2 will now be

Answer:

A) V_t = 18 m/s

B) V_t = 10.39 m/s

Explanation:

Formula for terminal speed is given by;

V_t = √(2mg/(DρA))

Where;

m is mass

g is acceleration due to gravity

D is drag coefficient

ρ is density

A is Area of object

A) Now, for sphere 1,we have;

m = 1 kg

V_t = 6 m/s

g = 9.81 m/s²

Now, making D the subject, we have;

D = 2mg/((V_t)²ρA))

D = (2 × 1 × 9.81)/(6² × ρA)

D = 0.545/(ρA)

For sphere 2, we have mass = 9 kg

Thus;

V_t = √[2 × 9 × 9.81/(0.545/(ρA) × ρA))]

V_t = 18 m/s

B) We are told that The cross sectional area of Sphere 2 is increased to 3 times the cross sectional area of Sphere 1.

Thus;

Area of sphere 2 = 3A

Thus;

V_t = √[2 × 9 × 9.81/(0.545/(ρA) × ρ × 3A))]

V_t = 10.39 m/s

I think it is D. Force

Answer:

Explanation:

Do you mean tire tracks?

If you do then the tracks show that there must have been a lot of heat involved. When the tires skid, the friction produced must be awfully hot to stop and 800 kg vehical (which is pretty small). The tire tracks that you see are bits of melted rubber taken from the tire.

Force is involved, but heat is the better answer.

gravity is necessary for friction to take place. If you were out in space, you could not get enough friction to leave tire tracks. (Force is awfully small).

Lubrication is there to give you a 4th choice. The exact opposite is what takes place. Lubrication reduces friction.

Answer:

V = 331.59m/s

Explanation:

First we need to calculate the time taken for the shell fire to hit the ground using the equation of motion.

S = ut + 1/2at²

Given height of the cliff S = 80m

initial velocity u = 0m/s²

a = g = 9.81m/s²

Substitute

80 = 0+1/2(9.81)t²

80 = 4.905t²

t² = 80/4.905

t² = 16.31

t = √16.31

t = 4.04s

Next is to get the vertical velocity

Vy = u + gt

Vy = 0+(9.81)(4.04)

Vy = 39.6324

Also calculate the horizontal velocity

Vx = 1330/4.04

Vx = 329.21m/s

Find the magnitude of the velocity to calculate speed of the shell as it hits the ground.

V² = Vx²+Vy²

V² = 329.21²+39.63²

V² = 329.21²+39.63²

V² = 108,379.2241+1,570.5369

V² = 109,949.761

V = √ 109,949.761

V = 331.59m/s

Hence the speed of the shell as it hits the ground is 331.59m/s

Answer:

C

Explanation:

It seems right.

answer

Think of it this way. Osmosis occurs when water flows to a different side given its a membrane or not. This is because it flows to a less dense area to reach equilibrium between the two sides. Heat is very similar. It will try to spread to places where there is not as much heat. Keeping the laws of heat travels up, the heat from the coils will reach the ends. We call this "Thermal Equilibrium"

Answer:

4 bobux

Explanation:

one bobux

two bobux

three bobux

four bobux

Answer:

hello your question is incomplete attached below is the complete question

21) The current at points B and C would be the same ( identical bulbs) while the current at Point A will be greater than the currents at point B and C. i.e. twice the current at either point B or point C

22) The potential difference across the bulbs will be the same and this is because the bulbs are connected in parallel to the the power source ( battery)

hence the voltage in the battery will be equal to the voltage across each bulb

Explanation:

The current at points B and C would be the same ( identical bulbs) while the current at Point A will be greater than the currents at point B and C. i.e. twice the current at either point B or point C

The potential difference across the bulbs will be the same and this is because the bulbs are connected in parallel to the the power source ( battery)

hence the voltage in the battery will be equal to the voltage across each bulb

Answer:

Electromagnetic waves differ from mechanical waves in that they do not require a medium to propagate. This means that electromagnetic waves can travel not only through air and solid materials, but also through the vacuum of space.

Explanation:

Since electromagnetic waves do not require a medium to pass through, they are faster in matter that has fewer particles. ... ~ Sound cannot travel in a vacuum because mechanical waves, such as sound waves, require a medium to propagate through.

Answer:

meter

Explanation:

Answer: The International System of Units is a system of measurement based on 7 base units

Explanation: the metre, kilogram, second, ampere, Kelvin, mole, and candela. These base units can be used in combination with each other.

Answer:

Explanation:

Formula for calculating normal force is expressed as:

[tex]F = ma\\since \ a = \frac{v^2}{r} \\F = \frac{mv^2}{r}[/tex]

m is the mass of the body = 50kg

v is the velocity of the Ferris wheel = 8m/s

r is the radius of the Ferris wheel

Substitute into the formula:

[tex]F = \frac{50 \times 8}{10}\\ F = \frac{400}{10}\\ F = 40N\\[/tex]

Hence the normal force of the seat is 40N

Answer:

3 in the back so it can shove it off the sand bar

Explanation:

Answer:

Explanation:

In an experimental research, the control group is the group that serves as the neutral group that is not given any form of treatment and serves as the group in which the experimental groups are firstly compared to. Thus, the control group in the question described is the Third group.

While experimental groups are the groups that receive treatments required to make an inference from the experiment. From this description, it can be deduced that the First and the Second group are the experimental groups.

The magnitude of the acceleration of  the crate is 1.033 m/s².

The given parameters;

The mass of the crate is calculated as;

W = mg

[tex]m = \frac{W}{g} \\\\m = \frac{925}{9.8} \\\\m = 94.388 \ kg[/tex]

The normal force on the crate is calculated as;

Fₙ = 925 - 325 x sin(25)

Fₙ = 925 - 137.35

Fₙ = 787.65 N

The frictional force on the object is calculated as follows;

[tex]F_k = \mu F_n\\\\F_k = 0.25 \times 787.65\\\\F_k = 196.91 \ N[/tex]

The magnitude of the crates acceleration is calculated from the net horizontal force on the crate;

[tex]\Sigma F_x = 0\\\\Fcos (\theta) - F_k = ma\\\\325\times cos(25) \ - \ 196.91 = ma\\\\97.54 = ma[/tex]

[tex]a = \frac{97.54}{94.388} \\\\a = 1.033 \ m/s^2[/tex]

Thus, the magnitude of the acceleration of  the crate is 1.033 m/s².

Learn more here:https://brainly.com/question/15742720

Answer:

this depends on religion

Explanation:

some people believe in the big bang and some people believe in Jesus Christ and other gods.

big bang- Gravity

God- spoke

Answer: IM 95%sure that the answer is B jus took the test got the answer right

Explanation:

Answer:

sorry I forgot I wish I could help

Answer: 549.9 km

Explanation: 84.6km every hour so 84.6*6.5= 549.9

Answer:

The charge pass through your hair dryer is 3000 C.

Explanation:

Given that,

Power = 1200 W

Voltage = 120 V

Flow time = 5 min

We need to calculate the current

Using formula of power

[tex]P=VI[/tex]

[tex]I=\dfrac{P}{V}[/tex]

Put the value into the formula

[tex]I=\dfrac{1200}{120}[/tex]

[tex]I=10\ A[/tex]

We need to calculate the charge pass through your hair dryer

Using formula of current

[tex]I=\dfrac{Q}{t}[/tex]

[tex]Q=It[/tex]

Put the value into the formula

[tex]Q=10\times5\times60[/tex]

[tex]Q=3000\ C[/tex]

Hence, The charge pass through your hair dryer is 3000 C.

Answer:

We must apply a force to keep the object moving at a constant velocity due to gravitational force or weight (in case of lifting), and due to frictional force (in case of pushing).

Explanation:

LIFTING:

When an object is lifted, we first need to overcome the force exerted on it by the field of gravity. Due to this force, which is also called the weight of object, we must apply a force on the object to keep it moving at constant speed, otherwise the gravity force will cause the object to slow down and eventually fall back on ground.

PUSHING:

When pushing an object the person must apply the force to first overcome the frictional force. The frictional force acts in opposite direction of motion. Thus, to move the object at constant speed we must apply force to it.

Hence, we must apply a force to keep the object moving at a constant velocity due to gravitational force or weight (in case of lifting), and due to frictional force (in case of pushing).

Answer:

A. Loses PE and gains KE

Explanation:

Statement is incomplete. Complete statement of problem is:

1. An object from a certain height falls freely. Which of the following happens to PE  and KE when the object is half on its way down?

A. Loses PE and gains KE

B. Gains PE and loses KE

C. Loses both PE and KE

D. Gains both PE and KE​

If we neglect the effects of any conservative force, the application of the Principle of Energy Conservation is reduced to a sum of gravitational potential ([tex]U_{g}[/tex]) and translational kinetic energies, measured in joules. That is:

[tex]U_{g,1}+K_{1} =U_{g,2}+K_{2}[/tex] (Eq. 1)

Let assume that an object falls from a height [tex]h[/tex] with a speed of zero. By definitions of gravitational potential and translational kinetic energies the previous is expanded. If final height is the half of initial value, then:

[tex]m\cdot g\cdot h = 0.5\cdot m\cdot g\cdot h +K_{2}[/tex] (Eq. 1b)

[tex]K_{2} = 0.5\cdot m\cdot g\cdot h[/tex]

[tex]K_{2} = 0.5\cdot U_{g,1}[/tex]

In a nutshell, translational kinetic energy is increased at the expense of diminishing gravitational potential energy. The correct answer is A.

400m

Explanation:

given,

v= 4m/s

t= 100s

d= ?

since, v = d / t

therefore, d = v * t (velocity multiplied by time)

=> d = 4 * 100

= 400m.

Answer:

   a = 4.0 m / s²,     so the result of the exercise is correct

Explanation:

This is an exercise on Newton's Second Law

               F = m a

we create a reference system with the horizontal x axis and the vertical y axis

Axis y

             N -W = 0

X axis

              F -fr = m a

give us the applied force F = 40 N, the value of the friction outside fr = 24 N

               a = (F - fr) / m

let's calculate

              a = (40 - 24) / 4

              a = 4.0 m / s²

so the result of the exercise is correct

Complete question:

use the hubble's law to determine the distance to a quasar receding at 75% the speed of light. The speed of light is 300,000 km/sec. assume Hubble's constant is 2.2 x 10⁻⁵ km/s/Lyr

Answer:

The distance to the quasar is 1.02 x 10¹⁰ Lyr

Explanation:

Given;

speed of light, v = 300, 000 km/sec

Hubble's constant, H₀ = 2.2 x 10⁻⁵ km/s/Lyr

percentage of the quasar recession = 75% of speed of light

Hubble's Law is given by;

[tex]v =H_od\\\\d = \frac{v}{H_o}\\\\d= \frac{(0.75*300,000)}{2.2*10^{-5}}.Lyr\\\\d = 1.02*10^{10} \ Lyr[/tex]

Therefore, the distance to the quasar is 1.02 x 10¹⁰ Lyr

Complete Question

The complete question is shown on the first uploaded image

Answer:

The value is [tex]F_{spring} = - k * x_f[/tex]

Explanation:

Generally  the force exerted on the mass by the spring is mathematically represented as

         [tex]F_{spring} = - k * \Delta x[/tex]

Here the negative sign  shows that the force is acting in the negative x axis

        k is the spring constant

  and  [tex]\Delta x[/tex] is the distance through which the spring moves the mass which is mathematically evaluated as

      [tex]\Delta x = x_f -x_i[/tex]

=>   [tex]F_{spring} = - k * [ x_f -x_i][/tex]

Given that  [tex]x_i = 0 \ m[/tex]

   [tex]F_{spring} = - k * x_f[/tex]

Answer:

D) Slide an object of known mass across a rough surface, using a constant applied force that can be measured by a force sensor. Place a motion detector behind the object so that its speed can be measured as it slides across the surface. Repeat the experiment for different applied forces.

Explanation:

"The motion detector will provide information about the object’s speed as a function of time as it slides as a result of the applied force. The information about the object’s speed as a function of time can be used to determine the acceleration of the object. The force sensor measures the applied force exerted on the object, and the mass of the object is known. Therefore, this experiment can be used to determine how an object’s mass is related to the net force exerted on the object and the acceleration of the object."

It cannot be A because we need an acceleration will be determined by gravity.

It cannot be B because the term constant speed means that there is no net force, which is required by the initial question.

It cannot be C because the experiment is good for determining the coefficient of friction but not for determining how the mass relates to the acceleration.

It must be D because the object is moving and we have a motion detector, we can graph the acceleration vs time graph. So D allows you to have a lot of the different acceleration values which helps with determining the relationship between acceleration and the mass.

Answer:

The force is [tex]F_b =  216 \  N [/tex]

Explanation:

From the question we are told that

   The  mass of the bungee jumper is  m  = 80 kg

    The spring constant is  [tex]k = 20 \ N/ m[/tex]

    The extension of the rubber bungee cords is  x = 50 m

Generally the weight of the jumper is

      [tex]W =  m *  g[/tex]

=>   [tex]W =  80 *  9.8 [/tex]

=>   tex]W =  784  \  N  [/tex]

Generally  the returning force of the rubber bungee cords is mathematically represented as

      [tex]F  =  k  *  x[/tex]

=>     [tex]F  =  20   * 50 [/tex]

=>     [tex]F  =  1000 \  N [/tex]

The force to be applied by the bear is

    [tex]F_b =  F -  W[/tex]

=>    [tex]F_b =  100 -  784[/tex]

=>  [tex]F_b =  216 \  N [/tex]

Explanation: (Two liquids can have a very close boiling point) So it will be salt water. I think :C

Answer:

C

Explanation:

only if there is a net force of zero, the body will not move

some people may say B but that is wrong because maybe one force is greater than the other so the object would still move even though the forces are in opposite directions and parallel