Calculate the pH of the buffer that results from mixing 60.0 mL of 0.25 M HCHO2(pKa= 3.74) and 15.0 mL of 0.500 M NaCHO

Answers

Answer 1

Answer:

[tex]pH=3.44[/tex]

Explanation:

Hello.

In this case, since the formic acid (HCHO2) is a weak acid and it is mixed with its conjugate base (CHO2⁻) in the form of NaCHO2, we can compute the pH via the Henderson-Hasselbach equation:

[tex]pH=pKa+log(\frac{[Base]}{[Acid]} )[/tex]

Whereas the concentration of both acid and base are computed considering final total volume of 75.0 mL after adding the volume of each solution as shown below:

[tex]n_{base}=0.500mol/L*0.0150L=7.50x10^{-3}mol\\\\n_{acid}=0.25mol/L*0.0600L=1.5x10^{-2}mol[/tex]

And the resulting concentrations upon the final volume:

[tex][Base]=\frac{7.50x10^{-3}mol}{0.0750L}=0.1M[/tex]

[tex][Acid]=\frac{1.5x10^{-2}mol}{0.0750L}=0.20M[/tex]

Thus, the pH is:

[tex]pH=3.74+log(\frac{0.10M}{0.20M} )\\\\pH=3.44[/tex]

Best regards.


Related Questions

Identify the possible issues if a sample in a spectrophotometer gives no reading. Select one or more: The wrong wavelength may be set. There may be an issue with the spectrophotometer. The sample may be placed impro

Answers

The question is incomplete; the complete question is;

Identify the possible issues if a sample in a spectrophotometer gives no reading. Select one or more:

The wrong wavelength may be set.

The sample may be placed improperly in the cuvette holder.

There may be an issue with the composition of the sample.

There may be an issue with the spectrophotometer

Answer:

The wrong wavelength may be set.

There may be an issue with the spectrophotometer

Explanation:

Substances do not absorb radiation at all wavelengths. The proper wavelength at which a substance absorbs must be used for a reading to be obtained from the spectrophotometer. If this is not done, no reading is obtained from the spectrophotometer.

Generally, if the spectrophotometer has an issue, it may display no reading until the machine is fixed.

The possible issues if a sample in a spectrophotometer gives no reading are:

The sample may be placed improperly in the cuvette holder. The wrong wavelength may be set.

According to the given question, we are asked to identify the possible reasons why a spectrophotometer would give no reading when a sample is used on it.

As a result of this, it is important to note that it is possible that the sample may not have been placed correctly on the cuvette holder or the wrong wavelength may be set which would cause the no reading error to show.

Read more here:

https://brainly.com/question/13998813

A magnet can be used to.
Bubble A. attract metal objects
Bubble B. measure the length of an object
Bubble C. measure the temperature of an object
Bubble D. measure the mass of an object

Answers

Answer:

D.measure the mass of an object

Answer: a attract metal objects

Explanation:

are you slow this is the easiest thing ever

How do you make a substance that glows in the dark? (for example glowsticks)

Answers

Answer:

Pour fluorescent dye and phenyl oxalate ester solution into the glass beaker with the hydrogen peroxide. Once the two solutions are combined, a chemical reaction will take place and cause the fluid to glow in the dark.

Which of the following metals will not react with sulfuric acid (H2SO4(aq)) by single displacement reaction?
Zinc, magnesium, iron, silver

Answers

Answer:

Silver

Explanation:

Silver (Ag) will not react with sulfuric acid (H2SO4(aq)) by single displacement reaction. This is because in the electrochemical series (activity series), silver is below hydrogen and it's less reactive.

The other elements stated (Zinc, Magnesium, Iron) are higher than hydrogen in the activity series and will definitely displace hydrogen in single displacement reaction.

A single-displacement reaction is known as a chemical reaction which occurs which one element is actually replaced or displaced by another in a compound. We represent it as:

B + D-C ➡️ B-C + D

This will readily take place if B is more reactive than D, and it will finally give a more stable product.

A 1.90-g sample of an oxide of bromine is converted to 3.188 g of AgBr. Calculate the empirical formula of the oxide. (molar mass for AgBr =187.78 g/mol)

a. BrO
b. Br2O
c. BrO
d. BrO3
e. None of these

Answers

Answer:

e. None of these

Explanation:

The oxide of Bromine (BrₐOₓ) produce "a" moles of Br that are equal to "a" moles of AgBr. The moles of AgBr are:

Moles AgBr:

3.188g AgBr * (1mol / 187.78g) = 0.01698 moles of AgBr = Moles of Br

These moles of Br weighs (Molar mass: 79.9g/mol):

0.01698 moles of Br * (79.9g / mol) = 1.36g of Br

Mass of Oxygen must be:

1.90g - 1.36g Br = 0.54g oxygen. In moles:

0.54g O * (1mol / 16g) = 0.03375 moles of O

Empirical formula is the simplest ratio of atoms in the molecule. Dividing in the moles of Br:

Br:  0.01698 moles of Br / 0.01698 moles = 1

O: 0.03375 moles of O / 0.01698 moles = 1.99 ≅ 2

That means empirical formula is:

BrO₂

And right option is:

e. None of these

The empirical formula of the oxide would be [tex]BrO_2[/tex]

1.90 g of the oxide of bromine produces 3.188 g of AgBr

moles of 3.188 g AgBr = 3.188/187.78

                                        = 0.017 moles

AgBr ---> Ag+ + Br-

Thus, mole of Br in AgBr = 0.017 moles

Mass of 0.017 Br = mole x molar mass

                           = 0.017 x 79.904

                              = 1.357 g

Mass of oxygen in the oxide of bromine = 1.90 - 1.357

                                                                    = 0.543 g

mole of 0.543 oxygen = 0.543/16

                                       = 0.0339 moles

mole of 1.357 g Br = 0.017

Dividing by the smallest:

Br = 0.017/0.017 = 1

O = 0.0339/0.017 = 1.99

Empirical formula = BrO2

More on empirical formula can be found here: https://brainly.com/question/1247523?referrer=searchResults

______ play an important role in transport, they make movements possible and they help repair and build your body's tissues.
1. Lipids
2. Carbohydrates
3. Nucleic Acids
4. Proteins​

Answers

The answer is Proteins

How many atoms are in 0.000045 grams of carbon?

Answers

Answer:

2.25E18

Explanation:

0.000045 g of Carbon x (1 mol C/ 12.01 g C) x (6.02 x 10E23 atoms / 1 mol C)

Start with the mass, then multiply it by the molar mass but put moles on the top and grams on the bottom to cancel out the grams. Then multiply it by Avogadros Constant to get atoms

A sample of hydrogen sulfide has a mass of 73.00 g. Calculate the number of hydrogen sulfide molecules in the sample.

Answers

Answer:

1.29×10²⁴ molecules.

Explanation:

From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.02×10²³ molecules. Thus, 1 mole of Hydrogen sulfide (H2S) contains 6.02×10²³ molecules.

Next, we shall determine the mass of 1 mole of H2S. This is illustrated below:

1 mole of H2S = (2×1) + 32 = 34 g

Finally, we shall determine the number of molecules in 73 g of H2S as follow:

34 g of H2S contains 6.02×10²³ molecules.

Therefore, 73 g of H2S will contain =

(73 × 6.02×10²³) /34 = 1.29×10²⁴ molecules.

Thus, 73 g of H2S will contain 1.29×10²⁴ molecules.

what is a way that scientists communicate their
results to others?
HELP PLS!

Answers

Answer:

The main ways that scientists communicate research results is by publishing the results in journals. ... Some journals are peer-reviewed, meaning they only publish articles that pass a certain standard of quality -- peer-reviewed journals are usually for a specific audience, such as other scientists.

Explanation:

The pH of a solution after a base and an acid have neutralized each other is ___.
Group of answer choices

A) 6

B) 8

C) 7

D) 0

Answers

Answer: B

Explanation:

What happens to gas molecules if you take away heat?

Answers

Answer:

Taking energy away from a gas cooling it down may cause it to turn into a liquid or condense

Answer:

sold,liquidator gas

Explanation:

pressure| practicelmodel of matter| siyavula

The concentration of H3O+ in human sweat can be as low as 2.5 × 10-6. The concentration of OH- in the sweat is ________, and this solution is ________ (acidic, basic, neutral).

Answers

Answer:

[OH⁻] = 4.0 × 10⁻⁹ M

Acidic

Explanation:

Step 1: Given data

Concentration of H₃O⁺: 2.5 × 10⁻⁶ M

Step 2: Calculate the concentration of OH⁻

We will use the following expression.

[H₃O⁺].[OH⁻] = Kw = 1.0 × 10⁻¹⁴

[OH⁻] = 1.0 × 10⁻¹⁴/[H₃O⁺] = 1.0 × 10⁻¹⁴/2.5 × 10⁻⁶ = 4.0 × 10⁻⁹ M

Step 3: Calculate the pH

We will use the following expression.

pH = -log [H₃O⁺] = -log 2.5 × 10⁻⁶ = 5.6

Since the pH < 7, the solution is acidic.

2AgNO3The following chemical reaction takes place in aqueous solution: (aq)(aq)(s)(aq) Write the net ionic equation for this reaction.

Answers

Answer:

[tex]2Ag^+(aq)+CO_3^{2-}(aq)\rightarrow Ag_2CO_3(s)[/tex]

Explanation:

Hello.

In this case, since the reaction is not given but a typical precipitation of silver from silver nitrate could be represented by its reaction with a soluble metallic sulfide or carbonate since silver carbonate and silver sulfide are insoluble, we can use for instance sodium carbonate to obtain:

[tex]2AgNO_3(aq)+Na_2CO_3(aq)\rightarrow Ag_2CO_3(s)+2NaNO_3(aq)[/tex]

Thus, since, silver nitrate, sodium carbonate and sodium nitrate are fully ionized by silver carbonate remains solid, the complete ionic equation is:

[tex]2Ag^+(aq)+2NO_3^-(aq)+2Na^+(aq)+CO_3^{2-}(aq)\rightarrow Ag_2CO_3(s)+2Na^+(aq)+2NO_3^-(aq)[/tex]

Then, since nitrate and sodium ions are the spectator ions since they are at both reactants and products, the net ionic equation turns out:

[tex]2Ag^+(aq)+CO_3^{2-}(aq)\rightarrow Ag_2CO_3(s)[/tex]

Best regards!

When we measure the heat of combustion of glucose, C6H12O6, in a bomb calorimeter, what products are formed in the reaction

Answers

Answer:

H for the combustion reaction:

C6H12O6(s) + 6O2(g) => 6CO2(g) +6H2O(g)

The answer is -2.81 x 103kJ

Explanation:

The equation for the combustion of glucose is[tex]C_6H_1_2 O_6 + 6 O_2 ----- > 6 CO_2 + 6 H_2 O[/tex]

The products formed in this reaction are Carbon dioxide and Water.

What is Combustion?

Combustion is a type of chemical reaction that takes place between substances that involves oxygen and produces heat and light in the form of a flame at which the rate of reactant combination is very high as the chemical reaction is in nature due to which more energy is released as a result of which the temperature of the reactant increases and accelerates the reaction even more.

It is a type of exothermic redox chemical reaction occur between a fuel that is a reductant and an oxidant.  Burning is an another word for combustion.

Examples of combustion include a burning matchstick – when the matchstick is struck against a matchbox, the friction heats the head of the matchbox to a temperature at which the chemical reacts and produces more heat, which then goes out into the air and gets burnt in the flame.

For above statement, The products formed in heat of combustion of glucose are Carbon dioxide and Water

Thus, the equation for the combustion of glucose is[tex]C_6H_1_2 O_6 + 6 O_2 ----- > 6 CO_2 + 6 H_2 O[/tex]

The products formed in this reaction are Carbon dioxide and Water.

Learn more about Combustion, here:

https://brainly.com/question/15117038

#SPJ5

Alkali metals tend to be more reactive than alkaline earth metals because ________. Alkali metals tend to be more reactive than alkaline earth metals because ________. alkali metals have lower melting points alkali metals have lower densities alkali metals have greater electron affinities alkali metals have lower ionization energies Alkali metals are not more reactive than alkaline earth metals.

Answers

Answer:alkali metals have lower ionization energies

Explanation:

----Alkali metals tend to be more reactive than alkaline earth metals because alkali metals have lower ionization energies

Alkali metals are metals found in group 1 and examples are Lithium, Sodium and potassium having 1 electron in their outermost shell, Alkali earth metals on the other hand are found in group 2 of the periodic table  and examp-les of which are  Beryllium, magnesium, Calcium  having 2 electrons in their outermost shells

Alkali metals are more reactive  than the alkali earth metal due to the former having a lower ionization energy  as we know , Ionization energy is the lowest energy it takes to remove a mole of electron from a mole of atom in gaseous sate, We can now see that it will take a very small amount to remove  1 valence electron than two valence electrons  and the ability to easily loose electron makes an element more reactive.

Answer:

Alkali metals tend to be more reactive than alkaline earth metals because-

Explanation:

The more easily an electron is lost, the more reactive it is. Alkalines have 2 valence electron (electrons on the outer shell) whereas, Alkalis have 1 valence electron. So Alkaline's bond is stronger. An increase in density also increases the attraction force between nucleus and electron. Therefore Alkali are more reactive.

help pls this is timed

Answers

Answer:

Explanation:

abything that is both mass and volume

Answer:

anything that has both mass and volume

When fertilizers enter surface water, they cause problems in the watershed by -




A. clogging narrow streams and preventing water from flowing properly.


B. increasing the amount of nutrients available to fish in lakes and streams.


C. causing rapid algal growth that decrease oxygen levels and choke aquatic life.


D. raising the water level in nearby rivers to levels leading to flooding.

Answers

C: Causing rapid algal growth that decreases oxygen levels and chokes aquatic life.

If this is incorrect, please, don't refrain to tell me. Thank you.

When fertilizers enter the water surface they cause brisk algal growth, which reduces the levels of oxygen and choke aquatic life.

What is eutrophication?

It is the phenomenon by which the entire water body, or some part of it becomes enriched with nutrients and minerals, mainly the phosphorus and nitrogen. This generally takes place when the fertilizers used in fields get washed in the water body.

A common effect of eutrophication is algal blooms. The emergence of algal blooms results in the depletion of oxygen of the water body resulting in  the choking of aquatic life.

Thus, the correct answer is option C.

Find out more information about eutrophication here:

https://brainly.com/question/2531736

what is unusual about the rotation of Venus

Answers

Answer:

Other planets rotate counterclockwise, but Venus rotates clockwise. Scientists believe this is due to an impact with a celestial body that occurred billions of years ago.

Explanation:

The rotation of Venus is unusual in a few ways like retrograde rotation,slow rotation.

1. Retrograde Rotation: Venus rotates in the opposite direction compared to most other planets in our solar system. While Earth and other planets rotate counterclockwise when viewed from the North Pole, Venus rotates clockwise. This retrograde rotation makes Venus unique among the planets in our solar system.

2. Slow Rotation: Venus rotates very slowly, taking around 243 Earth days to complete one rotation on its axis. This is longer than the time it takes for Venus to complete one orbit around the Sun, which is about 225 Earth days. As a result, a day on Venus (one complete rotation) is longer than its year (one orbit around the Sun).

Thus,these unique characteristics of Venus' rotation contribute to its distinct atmospheric conditions and extreme temperature variations between the day and night sides of the planet.

Learn more about Venus,here:

https://brainly.com/question/34012886

#SPJ6

(1.6): What volume of oxygen, at 18°C and 750 torr, can be
obtained from heating 100gm of potassium chlorate, KCIO,?

Answers

Answer:

Volume of oxygen obtained = 30 L

Explanation:

Given data:

Mass of KClO₃ = 100 g

Pressure  = 750 torr = 750/760 = 0.98 atm

Temperature  = 18°C = 18+273 = 291 K

Volume of oxygen obtained = ?

Solution:

Chemical equation:

2KClO₃    →     3O₂ + 2KCl

Number of moles of KClO₃:

Number of moles = mass/molar mass

Number of moles = 100 g/ 122.55 g/mol

Number of moles = 0.82 mol

Now we will compare the moles of KClO₃ with oxygen.

              KClO₃            :               O₂

                  2                :                 3

                0.82            :              3/2×0.82 = 1.23 mol

Volume of oxygen:

PV = nRT

0.98 atm × V = 1.23 mol ×0.0821 atm.L/mol.K × 291 K

0.98 atm × V = 29.4 atm.L

V = 29.4 atm.L /0.98 atm

V = 30 L

   

Why should you used distilled or deionized water instead of tap water when using AgNO3 as a test for anions?

Answers

Answer:

Why you use deonized water rather than tap water in this experiment? Because deonized water is pure and without contaminants that can affect the result of the experiment.

Explanation:

When using AgNO3 as the test anion, we used distilled or deionized water instead of tap water because deionized water is purer and free of contaminants that could affect the result of the experiment.

What is Distillation?

Distillation is the process which involves the conversion of a liquid into  water vapour and it condensed back to liquid form. It is the process in which separation of components of a mixture is based on different boiling points.

It is used to separate liquids from nonvolatile solids and also involve in the separation of alcoholic liquors from fermented materials or in the separation of two or more liquids having different boiling points, as in the separation of gasoline, kerosene, and lubricating oil from crude oil.

A plant that performs distillation is called a distillery while the apparatus used to perform distillation is called a still.

Thus, when using AgNO3 as the test anion, we used distilled or deionized water instead of tap water because deionized water is purer and free of contaminants that could affect the result of the experiment.

Learn more about Distillation, here:

https://brainly.com/question/29037176

#SPJ5

Phosphorus-32 has a half life of 14 days. If we begin with 40 mg how much is left after 42 days?

Answers

Answer:

0 mg

Explanation:

after 24 days all of it would be gone.

Phosphorus only has a 24 day life span.

What is the number of atoms in 2.65g of CH 4

Answers

Answer:

9.936x10^22 atoms of CH4

Explanation:

grams ----> mol

2.65 g CH4 if 1 mol of CH4 = 16.04 g CH4

2.65/16.04 = 0.165 mol of CH4

mol ------> atoms

1 mol = 6.022 x 10^23 atoms

0.165 mol x 6.022x10^23 = 9.936x10^22 atoms of CH4

hen aqueous solutions of calcium bromide and sodium carbonate are combined, solid calcium carbonate and a solution of sodium bromide are formed. The net ionic equation for this reaction is:

Answers

Answer:

[tex]Ca^{2+}(aq)+CO_3^{2-}(aq)\rightarrow CaCO_3 (s)[/tex]

Explanation:

Hello.

In this case, we can first write the complete molecular equation as shown below:

[tex]CaBr_2(aq)+Na_2CO_3\rightarrow CaCO_3 (s) +2NaBr(aq)[/tex]

In such a way, since all the species but calcium carbonate remain in aqueous solution, they are successfully dissociated whereas the solid product remain undissociated:

[tex]Ca^{2+}(aq)+2Br^-(aq)+2Na^+(aq)+CO_3^{2-}(aq)\rightarrow CaCO_3 (s) +2Na^+(aq)+2Br^-(aq)[/tex]

Thus, we can cancel out bromide and sodium ions as spectator ions, in order to obtain the required net ionic equation:

[tex]Ca^{2+}(aq)+CO_3^{2-}(aq)\rightarrow CaCO_3 (s)[/tex]

Best regards!

Susan has just moved into a new house. For some reason, she cannot get the grass to grow in her yard. She decided to grow small amounts of grass inside her house as part of an experiment. The first group of grass is exposed to light intensity of 400. The second group is exposed to light intensity of 1200. The graph below shows the results of Susan's experiment. 11. According to the graph, which of the following should be expected from Susan's two groups of plants?

A. The plants at a light intensity of 1200 will produce more oxygen than the plants at 400.
B. The plants at a light intensity of 1200 will perform only stage 1 of photosynthesis.
C. The plants at light intensity of 400 will produce more glucose than the plants at 1200.
D. The plants at a light intensity of 400 will grow more quickly than the plants at 1200.

Please help guys this is due tomorrow

Answers

Answer:

A

Explanation:

What volume in mL of 0.300 M NaF would be required to make a 0.0715 M solution of NaF when diluted to 250.0 mL with water

Answers

Answer: The volume of 0.300 M NaF required is 59.6 ml

Explanation:

According to the dilution law,

[tex]C_1V_1=C_2V_2[/tex]

where,

[tex]C_1[/tex] = concentration of concentrated NaF solution = 0.300 M

[tex]V_1[/tex] = volume of pure concentrated Na F solution = ?

[tex]C_2[/tex] = concentration of diluted NaF solution= 0.0715 M

[tex]V_2[/tex] = volume of diluted NaF solution= 250.0 ml

[tex]0.300\times x=0.0715\times 250.0[/tex]

[tex]x=59.6ml[/tex]

Thus the volume of 0.300 M NaF required is 59.6 ml

Which is the attractive force of an ionic bond?
A. a charged atom to a similarly charged atom
B. a positively charged ion to an oppositely charged ion
C. one or more electrons to one or more protons
D. a charged atom to a neutral atom

Answers

B. Ionic bonding occurs when two atoms share electrons - lost by one element and gained by the other.

2. Foliated rocks are characterized by​

Answers

Layers and bands .......................................

guys please help me with this periodic table homework is really IMPORTANT FOR ME

Answers

Answer:

A, Chlorine, Cl

Explanation:

Ne belongs to what group. a. noble gases, b.alkali metals, c. halogens, d. alkaline earth metals​

Answers

The answer is A hope this helps

NaBH4 is typically used in excess. Since the rate law for reduction of an aldehyde is first order in both NaBH4 and in aldehyde, how will using excess NaBH4 affect the overall reaction rate

Answers

Answer:

As the amount of NaBH4 is increased, the overall reaction rate also increases

Explanation:

This question tells us that NaBH4 is typically used in excess.

the rate law for reduction of an aldehyde is first order in NaBH4 and also in aldehyde,

We have The rate of reaction to be the equation below;

Rate = k[aldehyde][NaBH4]

The Rate of the reaction is directly proportional to NaBH4 concentration.

Therefore since they are directly proportional, when the amount of NaBH4 is increased, we will also have the overall reaction rate increase.

Other Questions
Let A, B, and C be any sets with A C and B C. Show that A B = A (C B).Can you help me prove the proof holds true? Why is it difficult to stop the practice of tavy farming in Madagascar? (Site 1) Solve the problem involving systems of lineas equations1. Your mother bought 20 kilos of mangoes and apple combined. Mango P60.00 per kilo and apple is P40.00 per kilo. If she paid P 1000.00 for 20 kilos how many kilos of each kind mother bought?(a) If x is number of kilos of mango and number of kilos of apple, then the equation is:______(b) Equation for the cost of fruits_______(c) The system equations are ______ and _________(d) Solve by any method.(e) Check if your result will satisfy the problem. Find the slope and Y-intercept of parallel lines using only (-4,6) I need some help pleaseee.... Ben & Jerry's mission to make the world a better place is linked to various organizational and marketing strategies, one of which is:_______a. supporting farmers who agree to use sustainable farming practices, implementing fair working standards, and investing in local communities.b. the intent of making modest profits without sacrificing high product quality standards.c. ingredients that are all completely organic and are available only in Vermont to ensure freshness and contribute to the local economy.d. a commitment to donating a percentage of profits to Teach for America.e. ingredients that come exclusively from developed countries promoting Fair Trade practices. Who is in Beowulf's family tree? I dont know the answer, I clicked C random. Ill give brainiest to whoever answers correctly!! When activities are arranged in a line according to the sequence of operations for assembling a particular product the layout is said to be a: hElP aGaiN pWeAsE..? What is 1486.377 rounded to the nearest hundredth? Which of these is a risk of speeding?a) less time to react to other drivers behavior b) tire damage c) mechanical failure d) greater likelihood of being distracted In 1950, a country had a total fertility rate of 5.9. In 2010, the total fertility rate of the country was 2.3. Which of the following is most likely the reason for the change in total fertility rate?A.Women had increased educational opportunities and had children later in life.B.Families had limited access to family planning and contraceptives.C.There were lower infant mortality rates as a result of increased access to healthcare.D. The country shifted to a more agricultural-based economy and the need for child labor decreased. I NEED THUS ANSWER ASAP5. Replace the bolded subject in the sentence with a subject pronoun.Anne et Pierre aiment couter des CDa- llsb- TuNousd- Elles When a polynomial 2x^3+3x^2+ax+b is divided by (x-2) leaves remainder 2, and (x+2) leaves remainder -2.Find a and b. All animals have skeletons on the inside of their bodies true or false What were the accomplishments/ contributions of the Inca Native American tribe?(details plz) How have scientific advances contributed to agricultural production?for brainlliest if 2 people answer two sides of a triangle have lengths 11 and 16 what must be true about the length of the third side Kelly can ride her bike 3 miles in 15 minutes. At this rate, how many miles can she ride in 60 minutes?