The Transportation and Logistics career cluster serves
government and national security.
the military and the secret service.
airplane passengers and grocery stores.
lawmakers and electricity providers.
Answer:
C - airplane and grocery store
Explanation:
i hope this helps
Look around your house. What do you own that you think might be manufactured?
Answer:
Almost anything! clothing, such as cotton... cars, computers etc.
Explanation:
anything that is made with big machinery in factories is manufactured
Which line in the passage indicates the use of sensors?
Paul, an electrician by profession, has a smart robot that accompanies him on his trips to various locations. A: the robot carries his heavy bag of
tools. B: It drills holes for electric sockets with the right amount of pressure, C: When his work is finished, the robot clears the floor of all electric
parts. The robot does not take breaks during work,
Answer:
B: It drills holes for electric sockets with the right amount of pressure
Explanation:
Pressure sensor.
A person is interested in becoming an electrician. What are some appropriate types of preparation that this individual can consider? (Select all that apply.)
apprenticeship
associate’s degree
four-year college degree
employment
technical school
Answer:
Four-year college degree I think
Answer:
apprenticeship
technical school
Explanation:
James is a good team player, helps team members, and has the courage to make firm decisions. Which two qualities does James possess?
O
arrogance
confidence
cooperativeness
O
tolerance
O optimism
Answer:
Confidence and cooperativeness.
Explanation:
As stated in the question, James seems like a nice guy. Not only is he a team player and would help others out, but he also has the courage to take firm decisions.
We can infer from the statement that James is confident, for he is not afraid to make firm decisions. Moreover, his act of helping others and his being a good team player suggests that he is cooperative.
Thus, the two qualities of James are cooperativeness and confidence.
A civil engineer is performing a tensile test on a brick using a tension machine. Immediately after he adds the first weight, the brick splits into two parts. Why does this happen? A. high elastic modulus of brick B. low tensile strength of brick C. compressive stress on the brick D. shear stress on the brick E. torsion stress on the brick
Answer:
B. A brick has low tensile strength.
Explanation:
what equipments are needed for wind power electrical generation?
Answer:
the equipment are needed for wind power electrical generation are:-gabage,
water and
D. M water
. What are the benefits of synthetic motor oil compared to conventional oil?
A) Provides maximum deposit protection in high temperatures
B) Provides maximum sludge protection at low temperatures
C) More resistant to oil breakdown
D) Maximum wear protection
E) All of the above
Explanation:
the answet is E. all of the above
This disease affects our throat. IDHPHTREAI assemble
Answer:
Diphtheria.
Explanation:
Diphtheria can be defined as an acute or highly contagious (infectious) disease of the upper respiratory tract and the nose. It is characterized by the inflammation of the mucous membrane, as well as causing hindrances to proper breath and ingestion through the formation of a false membrane in the throat of living organisms.
Diphtheria is a bacterial disease caused by bacillus Corynebacterium diphtheria excreting a potent toxins in the blood that spreads easily. Therefore, if not treated on time, it could lead to a fatal heart attack, nerve damage or paralysis and death in some cases. Some of the symptoms of diphtheria are fever, sore throat and breathing disorder.
Hence, diphtheria is a disease which affects the throat of living organisms such as humans.
Additionally, diphtheria can be prevented through the use of vaccines or immunization.
The "Big Dig" was the nickname of the civil engineering project that redesigned the highway Infrastructure for the city of
Boston. What type of engineer designed the tunnels for the "Big Dig?"
transportation engineer
construction engineer
environmental engineer
geotechnical engineer
d. The particles of powder are given an
electric charge while spraying them
to form the powder coating.
Answer:
While coating, the powder particles are given a negative electric charge to create an electrostatic force of attraction between the particles and the positively charged metallic object. This electrostatic force of attraction helps the powder particles to adhere to the metallic object strongly.
Explanation:
hope it's help you
The medieval scientist Galileo thought up the firs porotype for the helicopter.
True Or False?
In your opinion...
Do you think a product that measures distance could be included in a game or activity for you or others? If so, how?
Answer:no
TTHANLS FOR FREE POINTS
Explanation:
What is the one thing that Zeus loathes the most? What did he do when he caught humans committing this act? What parallels to another culture’s destruction story can you find?
Answer:
ares
Explanation:
He refer ares as the God that he hate the most
Part of the basic procedures is the vehicle check. What dose that mean?
A. Bringing it to a mechanic for a tune-up
B.checking to make sure it is in working order
C.Making sure you are entering your vehicle
D. Giving the tries a good kick to cheat traction
Create a set of questions a company designing a new motorcycle for a younger audience might want to ask external customers to make sure it has fully researched the market opportunity.
Answer:
Who would pay for my product or service?
Who has already bought from me?
Am I overestimating my reach?.
What does my network think?.
Am I making assumptions based on my personal knowledge and experience?
What's my revenue model
How will I sell my product or service?
How did my competitors get started?
How will I find my customers?
Is there room to expand my target market?
COMPLETE
QUESTION:
Which part of an HCS label provides information on protective measures?
POSSIBLE ANSWERS:
O Precautionary statement
O Signal word
O Pictogram
O Supplemental information
Submit Answer
Skip Question
Answer:
Signal word,pictogram and precautionary statement
Explanation:
Because the HCS requires chemical manufacturers,importers or distributors to ensure that each container of hazardous chemicals leaving the workplace is labeled with the following information called product identifier
In the long run, if the firm decides to keep output at its initial level, what will it likely do? Stay on SRATC3 but decrease to the point touching LRATC Shift to operate on SRATC4 Shut down Shift to operate on SRATC2 True or False: The minimum efficient scale is achieved at the minimum point on each average total cost curve. False True
Answer:
Stay on SRATC3 but decrease to the point touching LRATC.
False
Explanation:
The long run average total cost is the total cost for the firm to continue its operations. In the given scenario the firm decides to keep its level of out =put at initial level then it should stay in short run average total cost and then gradually moving towards long run average total cost.
We have a tube with a diameter of 5 inches that is 1 foot long. The tube then reduces the diameter to 3 inches. According to the Venturi effect, what will happen to the velocity of the fluid flowing through this section? What will happen to the pressure?
The Chinese had a toy helicopter some 1000 years ago. True Or False ?
Answer:
f
Explanation:
for the lazy people
Which of the following characteristics would not give animals an advantage in the ocean?
A.Long body hair
B.A smooth body
C.Structures that sense movement
D.A strong sense of smell
Three-dimensional measuring references all of these except
Answer: Table of contents
Explanation:
The options are:
radius.
length.
width.
height
Table of Contents
A three-dimensional shapes simply refers to a shape with three dimensions which include the length, the width and the height e.g. cube and cuboid.
Three-dimensional measuring references the length, width, height and radius. The radius can be found in a sphere. It should be noted that the table of contents isn't a three dimensional measuring reference.
QUESTION:
Which of the following statements is true about bulk metal?
POSSIBLE ANSWERS:
O A billet is smaller than a bloom.
OA slab is no greater than 0.25 in. thick.
OA bloom is smaller than a bar.
In regards to bridges, what innovation took place in the 60's ?
Answer:
Starting in the 1960s, bridge and road crews began using asphalt containing recycled rubber from discarded vehicle tires. It improved the quality and durability of the asphalt, while also lowering costs and cutting landfill waste.
Explanation:
:)
Kyla has obtained a bachelor's degree in electronics engineering. In her search for a job, she comes across an advertisement that states testing
of robots as the main responsibility. An eye for detail and good communication skills are required for this job. For what job is the advertisement?
ОА
robotics technician
ОВ.
software quality specialist
OC. robotics engineer
OD
automation engineer
Answer:
robotics engineer
Explanation:
A robotics engineer designs prototypes, builds and tests machines.
Lois is in high school and enjoys studying math and science subjects. She aspires to get into the robotics industry after completing her
education. How can she further her interest while still in high school?
ОА
enroll in an undergraduate program
OB. enroll in a graduate program
OC. take a technical certificate course
OD. participate in a robotics club
Answer:
d.partivipate in a robotic club
hope helps
mark me please
The annual average of solar photovoltaic energy in Phoenix is 6,720
Wh/m^2/day. You have an area of 500 m^2 on the roof of your home to put
solar panels. The solar panels you chose will convert 15% of its energy into
electricity. The cost of electricity is $0.12/kWh. How much electricity will
be generated in a year? How much money will be saved? *
Answer:
The amount of money saved is $22,075.2
Explanation:
The solar voltaic energy in Phoenix, S[tex]_E[/tex] = 6,720 Wh/m²/day
The area on the roof available for solar panels, A = 500 m²
The percentage of the energy received by the solar panels converted into electricity, η = 15% = 0.15
The cost of electricity, C = $0.12/kWh
The number of days in a year, t = 365 days
Therefore, the maximum area covered by the solar panel = A = 500 m²
The total solar photovoltaic energy received by the solar panels, 'E', in a year is given as follows;
E = S[tex]_E[/tex] × A × t
By plugging in the values of the variables, we get;
E = 6,720 Wh/m²/day × 500 m² × 365 days = 1,226,400,000 Wh
The electrical energy generated, [tex]E_e[/tex] = η × E
∴ [tex]E_e[/tex] = 0.15 × 1,226,400,000 Wh = 183960000 Wh = 183,960 kWh
The amount of money saved = The cost of electricity generated = C × [tex]E_e[/tex]
C × [tex]E_e[/tex] = $0.12/kWh × 183,960 kWh = $22,075.2
∴ The amount of money saved = C × [tex]E_e[/tex] = $22,075.2
Why is there an Engineering Process?
Answer:
well if there wasnt a process tony starks suit wouldn’t work properly, and it would probably fall apart. it is to make sure everything works exactly as they planned, our civilization has gotten this far because we created rules on how to build stuff.
Explanation:
the most common units of length in SI, or the International System of Units are
Answer:
meter (m) and kilometer (km)
Answer:
millimeters
Explanation:
just did the test
How does manufacturing affect the economy and society?
Explanation:
Because manufacturing has so many substantial links with so many other sectors throughout the economy, its output stimulates more economic activity across society than any other sector. That's a major reason manufacturers play such a critical role in growth.
Answer:
Manufacturing helps raise living standards more than any other sector. Manufacturing generates more economic activity than other sectors. For every dollar of domestic manufacturing value-added, another $3.60 of economic activity is generated elsewhere across the economy.
hope this helped