An 18 gram object with a specific heat of 0.900 j/g*c, and a temperature of 18 celsius is heated up with a lamp. the temperature increases to 40 celsius. how much heat energy did the object absorb?​

To get the initial pH, you need to calculate the new concentration of the substance in the diluted solution and add the required amount of substance to achieve the desired pH.

pH is a measure of the acidity or basicity of a solution. It is a logarithmic scale ranging from 0 to 14, where a pH of 7 is considered neutral, below 7 is acidic, and above 7 is basic.

If you add too much water to your solution, it will dilute the concentration of the substance in the mixture and may change the pH. To get the initial pH, you cannot simply add the same volume of the substance as the water you added back into the mixture.

This is because the amount of substance required to achieve the desired pH is dependent on the concentration of the substance in the mixture.

To determine the amount of substance required to achieve the desired pH, you need to calculate the new concentration of the substance in the diluted solution. This can be done using the formula:

C1V1 = C2V2

Where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.

Once you have calculated the new concentration, you can then add the required amount of substance to the diluted solution to achieve the desired pH.

In summary, adding too much water to a solution can change the pH, and adding the same volume of substance as the water added will not restore the initial pH. To get the initial pH, you need to calculate the new concentration of the substance in the diluted solution and add the required amount of substance to achieve the desired pH.

To know more about pH, visit:

https://brainly.com/question/15289741#

#SPJ11

The pH of the NaOH solution prepared to react with the pennies is 14.550.

To determine the molarity of the NaOH solution prepared to react with the pennies, follow these steps:

1. Calculate the moles of NaOH: Divide the mass of NaOH by its molar mass (142.1 g / 39.997 g/mol) = 3.553 moles of NaOH.

2. Calculate the volume of the solution: Convert the volume from mL to L (1000.0 mL * (1 L / 1000 mL)) = 1.000 L.

3. Calculate the molarity: Divide the moles of NaOH by the volume of the solution (3.553 moles / 1.000 L) = 3.553 M.

The molarity of the NaOH solution prepared to react with the pennies is 3.553 M.

To determine the pH of the solution:

1. Use the formula: pH = -log[H+], where [H+] represents the concentration of hydrogen ions in the solution.

2. Since NaOH is a strong base, it dissociates completely in water. The concentration of OH- ions is equal to the molarity of NaOH (3.553 M).

3. Calculate the pOH: pOH = -log[OH-] = -log(3.553) = -0.550.

4. Convert pOH to pH: pH = 14 - pOH = 14 - (-0.550) = 14.550.

The pH of the NaOH solution prepared to react with the pennies is 14.550.

To know more about pH :

https://brainly.com/question/29766400

#SPJ11

From the Electron Configuration of Mystery Elements:

Mystery element A has an electron configuration of 2-8-18-7, which means it has 7 valence electrons. Based on this, it would be reactive because it only needs one more electron to complete its outermost shell of eight electrons, which is the stable configuration of noble gases. This is supported by the PPT slide evidence, which states that elements with fewer than 4 or more than 7 valence electrons tend to be reactive.

Mystery element D has an electron configuration of 2-8-8-2, which means it has 2 valence electrons. Based on this, it would be reactive because it only needs to lose or gain two electrons to complete its outermost shell. This is also supported by the PPT slide evidence, which states that elements with 1-3 valence electrons tend to lose electrons to form positive ions, while elements with 5-7 valence electrons tend to gain electrons to form negative ions. Therefore, mystery element D could either form a positive ion by losing two electrons or form a negative ion by gaining six electrons.

Find out more on Valence Electrons here: https://brainly.com/question/371590

#SPJ1

It is anticipated that temperatures in the lower atmosphere would rise as carbon dioxide ([tex]CO_2[/tex]) levels in the atmosphere continue to rise. This is because CO2, a greenhouse gas, keeps heat from going back into space and instead stores it in the atmosphere. More heat will be trapped when [tex]CO_2[/tex] concentration rises, producing a warming effect. The Greenhouse Effect is a common name for this phenomenon.

According to predictions made by the Intergovernmental Panel on Climate Change (IPCC), a doubling of atmospheric [tex]CO_2[/tex] concentrations might lead to a 1.5–4.5 degree Celsius rise in global temperature. Among other things, this temperature rise may have a profound effect on ecosystems, weather patterns, and sea levels.

To know more about Greenhouse Effect, here

brainly.com/question/13706708

#SPJ1

Among the halogens, [tex]I2[/tex] has the lowest boiling point.

The boiling point of a substance is influenced by the strength of its intermolecular forces, which are the forces that hold molecules together. The halogens belong to the same group in the periodic table and have similar electronic configurations.

The boiling point increases with increasing molecular weight because the intermolecular forces increase with the size of the molecules.

The strength of the intermolecular forces depends on the type of attractive forces between the molecules. Among the halogens, the strength of the intermolecular forces increases with increasing polarity of the molecule.

Fluorine is the most electronegative of the halogens and has the smallest atomic size. Due to its high electronegativity, it has the strongest dipole-dipole interaction between its molecules, leading to the highest boiling point among the halogens.

On the other hand, iodine has the weakest intermolecular forces, leading to the lowest boiling point among the halogens. Therefore, among the halogens, I2 has the lowest boiling point.

To know more about halogens refer to-

https://brainly.com/question/11156152

#SPJ11

The final volume of the gas is 31.4 L when cooled from 45.0°C to 12.0°C.

The Charles's law states the relationship between the volume and the temperature of a gas when the pressure is constant. We can use the formula for the relationship between volume and temperature of a gas: [tex]\frac{V_{1} }{T_{1} }[/tex] = [tex]\frac{V_{2} }{T_{2} }[/tex]

where [tex]V_{1}[/tex] and [tex]T_{1}[/tex] are the initial volume and temperature, and [tex]V_{2}[/tex] and [tex]T_{2}[/tex] are the final volume and temperature.

We are given [tex]V_{1}[/tex] = 35.0 L and [tex]T_{1}[/tex] = 45.0°C = 45.0°C + 273.15 = 318.15 K,

and we need to find [tex]V_{2}[/tex] when [tex]T_{2}[/tex] = 12.0°C = 12.0°C + 273.15 = 285.15 K .  

Now by using the formula:

35.0 L / 318.15 K = [tex]V_{2}[/tex] / 285.15 K

[tex]V_{2}[/tex] = (35.0 L / 318.15 K) × 285.15 K

[tex]V_{2}[/tex] = 31.4 L

Therefore, the final volume of the gas is 31.4 L when cooled from 45.0°C to 12.0°C.

To know more about Charles's law visit:

https://brainly.com/question/16927784

#SPJ11

To calculate the mass of mercury(I) chloride that the chemist has added to the reaction flask, we need to know the molar mass of the compound and the number of moles of the solution added.

The molar mass of mercury(I) chloride is 232.6 g/mol. The chemist added an unspecified volume of the solution, so we cannot directly calculate the number of moles added. However, we can use the concentration of the solution, which is typically given in units of moles per liter (mol/L).

Let's assume that the concentration of the mercury(I) chloride solution is 0.1 mol/L. This means that there are 0.1 moles of mercury(I) chloride in every liter of the solution. We don't know how much of the solution the chemist added, but we can use a conversion factor to calculate the number of moles based on the volume.

For example, if the chemist added 10 mL of the solution, we can convert that to liters by dividing by 1000 (1 mL = 0.001 L).
10 mL x (0.001 L/1 mL) = 0.01 L
Now we can use the concentration to calculate the number of moles:

0.1 mol/L x 0.01 L = 0.001 mol
Finally, we can use the molar mass to convert from moles to grams:
0.001 mol x 232.6 g/mol = 0.2326 g

To convert to micrograms, we need to multiply by 1,000,000:
0.2326 g x 1,000,000 µg/g = 232,600 µg
Therefore, the mass of mercury(I) chloride added to the reaction flask is 232,600 µg, rounded to significant digits.

It's worth noting that the exact answer will depend on the actual concentration of the solution and the volume added, but this calculation provides a general approach to solving this type of problem.

To know more about chemist  refer here

https://brainly.com/question/30007736#

#SPJ11

Answer:

An electron has a negative charge therefore, losing the electron will cause the atom to be a positive ion. An ion is an atom where the number of protons does not equal the number of electrons.

Ma is the equivalent of an element that belongs to the [tex]3_r_d[/tex] column of the periodic table, while Tw is the equivalent of an element that belongs to the 6th column of the periodic table in this alternate dimension.

What is Compound?

In chemistry, a compound is a substance composed of two or more different types of elements chemically bonded together in a fixed proportion. The elements in a compound are combined in a way that results in a new substance with different chemical and physical properties from the individual elements that make it up.

Let's assume that Ma has a charge of +3 and Tw has a charge of -2 in this alternate dimension. To balance the charges, we need 3 Tw atoms for every 2 Ma atoms.

To know more about Compound, visit;

https://brainly.com/question/29108029

#SPJ4

The central atom of a molecule that exceeds the octet rule must come from period 3 or below.

This is because elements in these periods have empty d-orbitals available for hybridization, which allows them to form more than four covalent bonds and exceed the octet rule.

Examples of such elements include sulfur (S), phosphorus (P), and chlorine (Cl). Elements in higher periods, such as xenon (Xe) and radon (Rn), can also exceed the octet rule but are relatively rare in organic chemistry.

It is important to note that not all atoms follow the octet rule, and some can have fewer than eight electrons in their valence shell due to their unique electronic configurations.

To know more about  octet rule refer to-

https://brainly.com/question/865531

#SPJ11

The amount of energy needed to change a material from a liquid to a gas is called the heat of vaporization. This is a specific type of enthalpy change that occurs when a substance changes phase from a liquid to a gas at a constant temperature and pressure.

The heat of vaporization is a measure of the amount of energy required to break the intermolecular forces holding the molecules in a liquid phase and transform them into a gas phase.

The heat of vaporization is an important physical property of a substance and is used in various fields, such as thermodynamics, chemical engineering, and material science, to understand the behavior and properties of substances in different states.

To know more about the heat of vaporization refer here :

https://brainly.com/question/12625048#

#SPJ11

ans.1

blank 1 = 4

blank 2 = 4

blank 3 = 1

blank 4 = 8

ans.2

blank 1 = 10

blank 2 = 15

blank 3 = 1

blank 4 = 30

ans.3

blank 1 =  1

blank 2 = 2

blank 3 = 2

blank 4 = 1

blank 5 =2

The concentration of pesticide remaining after 62.0 minutes at 25°C is 0.0191 M.

The first-order rate law for a reaction can be expressed as:

[tex]ln([A]/[A]₀) = -kt[/tex]

Where [A] is the concentration of the reactant at any given time, [A]₀ is the initial concentration, k is the rate constant, and t is the time elapsed.

Using the given rate constant of [tex]6.40 × 10^(-3) min^(-1)[/tex]and the initial concentration of 0.0314 M, we can plug in the values and solve for [A] after 62.0 minutes:

[tex]ln([A]/0.0314) = -(6.40 × 10^(-3) min^(-1)) × (62.0 min)[/tex]

Solving for [A], we get:

[tex][A] = 0.0314 × e^(-(6.40 × 10^(-3) min^(-1)) × (62.0 min))[/tex]

[A] = 0.0191 M

Therefore, the concentration of pesticide remaining after 62.0 minutes at 25°C is 0.0191 M.

To know more about pesticide refer to-

https://brainly.com/question/31600813

#SPJ11

Approximately 91.2 calories of heat are needed to raise the temperature of 125.0g of lead from 17.5°C to 41.0°C.

To calculate the heat in calories needed to raise the temperature of 125.0g of lead from 17.5°C to 41.0°C, we'll use the specific heat formula and convert Joules to calories. The formula is:

q = m * C * ΔT

where q represents the heat absorbed, m is the mass of the substance (in grams), C is the specific heat capacity (in J/g°C), and ΔT is the change in temperature (in °C).

Step 1: Calculate the change in temperature (ΔT).
ΔT = Final temperature - Initial temperature
ΔT = 41.0°C - 17.5°C
ΔT = 23.5°C

Step 2: Use the specific heat formula.
q = m * C * ΔT
q = 125.0g * 0.130J/g°C * 23.5°C
q = 381.625J

Step 3: Convert Joules to calories.
1 calorie = 4.184 Joules
q = 381.625J / 4.184J/cal
q ≈ 91.2 calories

So, approximately 91.2 calories of heat are needed to raise the temperature of 125.0g of lead from 17.5°C to 41.0°C.

To know more about temperature, visit:

https://brainly.com/question/29133754#

#SPJ11

Boyle's Law states that the product of the pressure and volume of a gas is constant when the temperature is held constant. Mathematically, this can be expressed as:

PV = k, where P represents pressure, V represents volume, and k is a constant value.

From this equation, it becomes evident that if the temperature remains constant, an increase in pressure will result in a decrease in volume, and vice versa. In simpler terms, when the temperature is constant, the volume of a gas is inversely proportional to its pressure.

To further illustrate this point, consider a gas enclosed in a piston. If the temperature remains constant and you apply more pressure to the piston by compressing it, the volume of the gas will decrease. Conversely, if you decrease the pressure by allowing the piston to expand, the volume of the gas will increase.

In summary, when the temperature of a gas is constant, its volume and pressure share an inverse relationship, as described by Boyle's Law. This means that an increase in pressure will lead to a decrease in volume, while a decrease in pressure will lead to an increase in volume.

To know more about Boyle's Law refer here

https://brainly.com/question/30367067#

#SPJ11

A reaction must be spontaneous if its occurrence is exothermic with an increase in entropy.

For a reaction to be spontaneous, two factors are considered: enthalpy change (ΔH) and entropy change (ΔS). A spontaneous reaction usually has a negative ΔH, indicating that it is exothermic (releases heat).

Additionally, a spontaneous reaction has a positive ΔS, meaning there is an increase in entropy (disorder) in the system. The combination of these two factors, along with temperature (T), determines the Gibbs free energy change (ΔG), where ΔG = ΔH - TΔS.

A negative ΔG value signifies that the reaction is spontaneous. Therefore, a reaction with an exothermic occurrence and an increase in entropy is more likely to be spontaneous.

To know more about Gibbs free energy click on below link:

https://brainly.com/question/13318988#

#SPJ11

In B8, enter the custom transaction number function: `=C8&D8&LEFT(E1,1)`. Use Auto Fill to copy it down column B.

In G8, enter the nested function: `=IF(AND(E8="Credit",F8>=4000),"Flag","")`. Auto Fill it down column G.

In D5, create a data validation list with Quantity, Payment Type, and Amount.

In B5, type Trans# 30038C. In D5, select Quantity.

In F5, enter the nested lookup function: `=IF(D5="Quantity",VLOOKUP(B5,C8:F32,2,FALSE),IF(D5="Payment Type",VLOOKUP(B5,C8:F32,3,FALSE),IF(D5="Amount",VLOOKUP(B5,C8:F32,4,FALSE),"")))`.

Follow these steps to achieve the desired result in your Sales worksheet.

To know more about nested function click on below link:

https://brainly.com/question/30186413#

#SPJ11

The pH of the buffer is 4.60.

To calculate the pH of a buffer, we can use the Henderson-Hasselbalch equation:

[tex]pH = pKa + log([A-]/[HA])[/tex]

where pKa is the dissociation constant of the weak acid, [tex][A-][/tex] is the concentration of the conjugate base, and [tex][HA][/tex] is the concentration of the weak acid.

In this case, the weak acid is acetic acid[tex](HC2H3O2)[/tex], the conjugate base is acetate [tex](C2H3O2-)[/tex], and the dissociation constant (Ka) is [tex]1.8 × 10^-5[/tex].

First, we need to calculate the ratio of [tex][A-]/[HA][/tex]:

[tex][A-]/[HA] = (0.162 M)/(0.225 M) = 0.72[/tex]

Next, we can substitute the values into the Henderson-Hasselbalch equation:

[tex]pH = pKa + log([A-]/[HA])\\pH = -log(1.8 × 10^-5) + log(0.72)[/tex]

pH = 4.74 + (-0.14)

pH = 4.60

Therefore, the pH of the buffer is 4.60.

To know more about pH refer to-

https://brainly.com/question/491373

#SPJ11

The difference in temperature from Saturday to Sunday is 9 degrees Celsius. This means that the temperature increased by 9 degrees from Saturday to Sunday.

To show the difference in temperature from Saturday to Sunday, we can use the equation:

Difference = Sunday temperature - Saturday temperature

Given that the temperature on Saturday is -13° and on Sunday it is -4°, we can calculate the difference in temperature using the above equation as follows:

Difference = -4° - (-13°)

Difference = -4° + 13°

Difference = 9°

The number line is a graphical representation of numbers where we can visualize their position relative to each other. Starting from -13° on the number line and moving 9 units to the right, we reach -4°, which represents the temperature on Sunday. This visualization confirms that the difference between the two temperatures is 9 degrees.

To learn more about temperature follow the link:

brainly.com/question/14633960

#SPJ4

When water is boiling :B. the molecules at the surface of the liquid evaporate first.

a. This is because the heat energy is transferred to the water from the bottom, causing the water molecules to gain energy and move faster. As the water molecules move faster, they collide with each other and break the intermolecular forces that hold them together. The water molecules at the surface have weaker intermolecular forces compared to those in the bulk of the liquid, which means they can more easily overcome these forces and evaporate.

b. The part of a liquid molecule that usually has the highest kinetic energy is the part that is moving the fastest. In a water molecule, this would be the oxygen atom, as it is larger and has more electrons than the hydrogen atoms. The oxygen atom therefore has a greater mass and a larger electron cloud, which allows it to move more quickly than the hydrogen atoms.

Learn more about molecules here:https://brainly.com/question/26556885

#SPJ1

The pH of the buffered solution is 4.374.

A buffered solution is a solution that resists changes in pH when small amounts of acid or base are added to it.

In order to calculate the pH of a buffered solution, we need to use the Henderson-Hasselbalch equation, which is pH = pKa + log([A-]/[HA]). In this equation, pKa is the dissociation constant of the weak acid (benzoic acid in this case), [A-] is the concentration of the conjugate base (sodium benzoate), and [HA] is the concentration of the weak acid.

First, we need to find the concentrations of benzoic acid and sodium benzoate in the solution. We can use the equation n = cV, where n is the number of moles, c is the concentration, and V is the volume.

For benzoic acid:
n = (21.5 g / 122.12 g/mol) = 0.176 mol
c = 0.176 mol / 0.2 L = 0.88 M
[HA] = 0.88 M

For sodium benzoate:
n = (37.7 g / 144.11 g/mol) = 0.262 mol
c = 0.262 mol / 0.2 L = 1.31 M
[A-] = 1.31 M

Next, we need to find the pKa of benzoic acid. The pKa of benzoic acid is 4.20.

Now we can plug in the values into the Henderson-Hasselbalch equation:
pH = 4.20 + log([1.31]/[0.88])
pH = 4.20 + log(1.49)
pH = 4.20 + 0.174
pH = 4.374

Therefore, the pH of the buffered solution is 4.374.

To know more about pH, visit:

https://brainly.com/question/15289741#

#SPJ11

The theoretical yield of oxygen from the oxides present in a 1.00 kg sample of lunar soil will depend on the composition of the soil. However, we can make some assumptions based on the known composition of lunar soil.

Lunar soil is known to contain various oxides, including silicon dioxide (SiO2), aluminum oxide (Al2O3), iron oxide (FeO and Fe2O3), titanium dioxide (TiO2), and others. These oxides can be chemically processed to release oxygen gas.

The stoichiometry of the chemical reactions involved will depend on the specific oxides present in the soil. However, for the purposes of estimation, we can assume that all the oxides present in the soil are converted to their respective metals and oxygen gas.

For example, the reaction for the conversion of silicon dioxide to silicon metal and oxygen gas is:

SiO2(s) + 2 C(s) → Si(s) + 2 CO(g)

From this reaction, we can see that for every 1 mole of SiO2, 1 mole of oxygen gas is produced. The molar mass of SiO2 is 60.08 g/mol, so in a 1.00 kg sample of lunar soil, there are:

1000 g / 60.08 g/mol = 16.65 moles of SiO2

Therefore, the theoretical yield of oxygen gas from the SiO2 present in the soil is:

16.65 moles of O2 (since 1 mole of SiO2 produces 1 mole of O2)

Similarly, we can calculate the theoretical yield of oxygen gas from the other oxides present in the soil using their respective stoichiometric equations. Adding up the oxygen yields from each oxide will give us the total theoretical yield of oxygen from the soil.

Note that the actual yield of oxygen will likely be less than the theoretical yield due to inefficiencies and losses during the processing of the soil.

To know more about theoretical refer here

https://brainly.com/question/30604977#

#SPJ11

The rate at which NH3 reacts in the given reaction is 4.00 mol L-1 s-1. This is determined by using the stoichiometry of the reaction and the given rate of formation of N2.

The given chemical reaction shows the stoichiometric relationship between the reactants and products, which is important in determining the rate of the reaction. The rate of formation of N2 is given as 2.00 mol L-1 s-1. This means that for every second, the concentration of N2 increases by 2.00 mol L-1.

To find the rate at which NH3 reacts, we need to look at the stoichiometry of the reaction. From the balanced equation, we can see that for every 4 moles of NH3 that react, 2 moles of N2 are formed. Therefore, the ratio of the rate of formation of N2 to the rate of consumption of NH3 is 2:4, or 1:2.

Using this ratio, we can calculate the rate at which NH3 reacts. If the rate of formation of N2 is 2.00 mol L-1 s-1, then the rate of consumption of NH3 is twice as much, or 4.00 mol L-1 s-1.

In summary, the rate at which NH3 reacts in the given reaction is 4.00 mol L-1 s-1. This is determined by using the stoichiometry of the reaction and the given rate of formation of N2.

To know more about stoichiometry, visit:

https://brainly.com/question/30215297#

#SPJ11

As water evaporates, the concentration of ions in the remaining solution will increase.

This is because as water evaporates, it leaves behind the dissolved ions, which become more concentrated in the remaining solution. The extent of this concentration increase will depend on the initial concentration of the ions in the original solution and the rate of water evaporation.

In general, the longer the water is allowed to evaporate, the more concentrated the remaining solution will become.

For example, imagine a solution containing salt dissolved in water. As the water evaporates, the concentration of salt ions in the solution will increase, making the solution increasingly salty. If the solution is left to evaporate completely, all the water will eventually be gone and only the salt crystals will remain.

In this case, the concentration of salt ions will be at its maximum.

Overall, the concentration of ions in a solution will increase as water evaporates, resulting in a more concentrated solution. This can have implications for a variety of processes, from cooking to chemical reactions, where precise control of ion concentration may be necessary for the desired outcome.

To know more about concentration of ions, visit:

https://brainly.com/question/14526375#

#SPJ11

Gerald T. Moneybottom's action of buying the Amazon rainforest and protecting it from logging has significant positive impacts on both the environment and human health.

By preventing logging, he ensures the survival of various endangered tree species, which could have otherwise become extinct. The rainforest is home to many unique plants and animals that have yet to be discovered and studied, and some of these species could potentially have medicinal properties.

By protecting the rainforest, Moneybottom has provided an opportunity for scientists to study these species and develop new medicines that can improve human health.

In addition to the medicinal benefits, the rainforest also serves as a natural carbon sink, absorbing carbon dioxide from the atmosphere and slowing down the process of global warming.

The preservation of the Amazon rainforest helps to mitigate the effects of climate change by reducing the amount of carbon dioxide in the atmosphere. This action contributes to the effort to reduce greenhouse gas emissions and fight climate change, which is a critical global issue.

To know more about Amazon rainforest  refer to-

https://brainly.com/question/28290952

#SPJ11

The DART system and sensors have several advantages over seismometers and coastal tide gauges in measuring tsunami-related events. Three advantages are Real-time measurement, Wide coverage and High accuracy.

Real-time measurement: The DART system provides real-time measurements of the height and speed of waves in the open ocean, whereas seismometers and coastal tide gauges only measure the arrival time and amplitude of waves at a specific location. Real-time measurements allow for more accurate and timely predictions of tsunami-related events, enabling earlier warning and faster response times.

Wide coverage: The DART system covers a larger area than seismometers and coastal tide gauges, allowing for more comprehensive monitoring of oceanic waves. The wider coverage allows for more accurate prediction of the direction, speed, and strength of tsunamis, reducing the risk of false alarms and missed warnings.

High accuracy: The DART system is designed to measure the height and speed of waves with high accuracy, providing detailed information on the magnitude and severity of tsunamis. This level of accuracy can improve predictions by providing more precise estimates of the extent of damage and the areas at risk, enabling more effective disaster planning and response.

Overall, the DART system and sensors offer significant advantages over traditional seismometers and coastal tide gauges, providing more accurate and timely predictions of tsunami-related events, enabling faster response times, and reducing the risk of false alarms and missed warnings.

To know more about DART system refer to-

https://brainly.com/question/13015311

#SPJ11

To neutralize 100.0ml of a 2.5 M solution of H2SO4, you will need 28.055 grams of KOH.

To neutralize 100.0ml of a 2.5 M solution of H2SO4, you will need to add a certain amount of KOH, which will react with the H2SO4 to form water and a salt. The goal of this process is to achieve a neutral pH of 7, indicating that the acid and base have been completely reacted.

To calculate how many grams of KOH are needed, you first need to determine the number of moles of H2SO4 present in the solution. This can be done using the formula:

moles = concentration (M) x volume (L)

Plugging in the values, we get:

moles H2SO4 = 2.5 M x 0.100 L = 0.250 moles

Since H2SO4 is a diprotic acid, meaning it can donate two hydrogen ions, it will require twice the amount of KOH to neutralize. Therefore, we need to double the number of moles of H2SO4 to get the number of moles of KOH needed:

moles KOH = 2 x 0.250 moles = 0.500 moles

Now we can use the formula for finding the mass of a compound using its moles and molar mass:

mass = moles x molar mass

The molar mass of KOH is 56.11 g/mol, so we can plug in the values and solve for the mass of KOH needed:

mass KOH = 0.500 moles x 56.11 g/mol = 28.055 g

Therefore, to neutralize 100.0ml of a 2.5 M solution of H2SO4, you will need 28.055 grams of KOH.

To know more about neutralize, visit:

https://brainly.com/question/27891712#

#SPJ11

During alpha decay, atomic nuclei emit alpha particles, which are helium-4 nuclei composed of two protons and two neutrons. So, during alpha decay, the total mass of the reactants is equal to the mass of the main nucleus before decay.

In beta-plus decay, also called positron emission, protons in the nucleus are converted into neutrons, and positrons and neutrinos are emitted. Since the mass of a positron is very small compared to the mass of a proton or neutron, the total mass of the reactants in beta and decay is very close to the mass of the parent nucleus before decay.

Beta -mm is also known as electrons or negatively, and the nucleus neutron is transformed into protons and electrons and is produced by antizatinrino. Because the electronic mass is very small compared to the mass of protons or neutrons, the total mass of the minimum minimum minimum reagent is very close to the body of the body.

Generally, the total mass of the reactants in a fission process is very close to the mass of the parent nucleus before fission, because the mass of the particles released during fission is much smaller than the mass of the parent nucleus. However, due to the conservation of energy and momentum, there can be slight differences in mass between the reactants and the decay products, called mass defects.

This mass defect is converted into energy according to Einstein's famous equation E = mc². where E is the energy released, m is the mass defect, and c is the speed of light.

learn more about total mass of reactants: https://brainly.com/question/19958395

#SPJ1

The total energy absorbed by a 500 g sample of red river ice when it is brought indoors and melted from -40°C to 25°C is 218,250 joules. This includes the energy required to raise the temperature of the ice, melt the ice, and raise the temperature of the resulting liquid water.

To calculate the total energy absorbed by the ice sample, we need to consider the different processes involved in the transition from ice at -40°C to liquid water at 25°C.

First, we need to calculate the energy required to raise the temperature of the ice from -40°C to 0°C:

Q1 = m × cice × ΔT1

Q1 = 500 g × 2.09 J/gK × (0°C - (-40°C))

Q1 = 41800 J

Next, we need to calculate the energy required to melt the ice at 0°C:

Q2 = m × ΔHfusion

Q2 = 500 g × 6.02 kJ/mol ÷ 18.02 g/mol

Q2 = 166 kJ

Then, we need to calculate the energy required to raise the temperature of the water from 0°C to 25°C:

Q3 = m × cwater × ΔT2

Q3 = 500 g × 4.18 J/gK × (25°C - 0°C)

Q3 = 10450 J

Finally, we add up the three energy values to get the total energy absorbed by the ice sample:

Qtotal = Q1 + Q2 + Q3

Qtotal = 41800 J + 166000 J + 10450 J

Qtotal = 218250 J

Therefore, the total energy absorbed by the ice sample is 218250 joules (J).

To know more about the total energy refer here :

https://brainly.com/question/3551742#

#SPJ11