Answer:
The real answer is C : organize the data in a chart or a table.
does anyone know how to do this
A train accelerates at -1.5m/s for 10 seconds if the train had an initial speed of 32 m/s what is it's new speed
A roller coaster accelerates from 0 m/s to 25 m/s in 5 seconds. Determine the acceleration of the roller coaster.
We know the moon circulates the Earth. Suppose the mass of the Earth and moon are 5.9742 x1024 kg and 7.36 x 1022 kg, whereas the radius of the orbit is 382171 km. What will the gravitational force between the Earth and the moon?
Answer:
The gravitational force between two objects, one of mass M1 and the other of mass M2, is:
F = G*M1*M2/R^2
Where G is a constant:
G = 6.6x10^11 m^3*/(kg*s^2)
And R is the distance between the two objects.
M1 = 5.9742x10^24 kg
M2 = 7.36x10^22 kg
R = 382171 km = 382171000 m
Then the gravitational force is:
F = 6.6x10^-11 m^3*/(kg*s^2)*(5.9742x10^24 kg)*(7.36x10^22 kg)/(382171000 m)^2
F = 1.987x10^20 N
a) Gamma Rays
b) X-Rays
c) Visible Light
d) Microwaves
Answer:
A. Gamma rays
or D. microwaves
Explanation:
correct me if i am wrong
A loaf of bread bakes in an oven. The bread is on a rack about one foot above the heat source. However, the top of the bread cooks just as fast as the bottom. How is heat being added to the bread?
Answer:
the bread is getting heated from top and bottom because the oven is heated all over and the particles from the oven makes the bread's particles heat up and the bread will be done
Explanation:
i have the same answer
Answer:
The air is heated by the heat source in the oven. The hot air rises, surrounds the bread, and heats the bread on all sides.
Explanation:
Four rods that obey Hooke's law are each put under tension. (a) A rod 50.0 cm50.0 cm long with cross-sectional area 1.00 mm21.00 mm2 and with a 200 N200 N force applied on each end. (b) A rod 25.0 cm25.0 cm long with cross-sectional area 1.00 mm21.00 mm2 and with a 200 N200 N force applied on each end. (c) A rod 20.0 cm20.0 cm long with cross-sectional area 2.00 mm22.00 mm2 and with a 100 N100 N force applied on each end. Order the rods according to the tensile stress on each rod, from smallest to largest.
Answer:
c < a = b
Explanation:
The tensile stress = Force applied/(Cross sectional area)
(a) The applied force = 200 N
The cross sectional area = 1.00 mm² = 1 × 10⁻⁶ m²
The tensile stress = 200 N/(1 × 10⁻⁶ m²) = 200,000,000 Pa = 200 MPa
(b) The applied force = 200 N
The cross sectional area = 1.00 mm² = 1 × 10⁻⁶ m²
The tensile stress = 200 N/(1 × 10⁻⁶ m²) = 200,000,000 Pa = 200 MPa
(c) The applied force = 100 N
The cross sectional area = 2.00 mm² = 2 × 10⁻⁶ m²
The tensile stress = 100 N/(2 × 10⁻⁶ m²) = 50,000,000 Pa = 50 MPa
Therefore, the tensile stress from smallest to largest are;
(a) 50 MPa, < (b) 200 MPa = (a) 200 MPa
Therefore, we have;
c < a = b.
20. Give an example of sublimation.
Answer:Explanation:
A common example of sublimation is the dry ice, heavy CO2.
PLEASE HELP I’ll GIVE BRAINLIEST
Equi-potential surface are surface that are………
Select one:
a. zero
b. the same electric potential
c. different electric potential
d. not dependent on constant radius
Answer:
b is the answer
Explanation:
The surface which is the locus of all points which are at the same potential is known as the equipotential surface.
The surface which is the locus of all points which are at the same potential is known as the equipotential surface.In other words, any surface with the same electric potential at every point is termed as an equipotential surface.
The 50-mm-diameter cylinder is made from Am 1004-T61 magnesium and is placed in the clamp when the temperature is T1 = 15°C. If the two 304-stainless-steel carriage bolts of the clamp each have a diameter of 10 mm, and they hold the cylinder snug with negligible force against the rigid jaws, determine the temperature at which the average normal stress in either the magnesium or the steel first becomes 12 MPa.
Answer:
The temperature of steel first becomes 12 MPa at a temperature of 18.65°C
Explanation:
Given that,
Diameter = 50 mm
Temperature = 15°C
Diameter = 10 mm
Stress = 12 MPa
We need to calculate the temperature of steel
Using formula of stress
[tex]stress=\alpha Y\Delta T[/tex]
Where, Y = young modulus
T = temperature
[tex]\alpha[/tex]= coefficient of linear expansion of the material
Put the value into the formula
[tex]12\times10^{6}=17.3\times10^{-6}\times190\times10^{9}\times(T_{2}-15)[/tex]
[tex](T_{2}-15)=\dfrac{12\times10^{6}}{17.3\times10^{-6}\times190\times10^{9}}[/tex]
[tex]T_{2}=3.650+15[/tex]
[tex]T_{2}=18.65^{\circ}[/tex]
We need to calculate the temperature of magnesium
Using formula of stress
[tex]stress=\alpha Y\Delta T[/tex]
Put the value into the formula
[tex]12\times10^{6}=25.2\times10^{-6}\times45\times10^{9}\times(T_{2}-15)[/tex]
[tex](T_{2}-15)=\dfrac{12\times10^{6}}{25.2\times10^{-6}\times45\times10^{9}}[/tex]
[tex]T_{2}=10.5+15[/tex]
[tex]T_{2}=25.58^{\circ}[/tex]
Hence, The temperature of steel first becomes 12 MPa at a temperature of 18.65°C
How many cats are at shelter if each pen holds 10 cats and there are 56 pens?
Answer:
560
Explanation:
56*10=560
hope this helps :3
if it did pls mark brainliest
Answer: 560 cats
Explanation: 56x10 = 560.
If you apply a net force of 3 N on 100g -box, what is the acceleration of
the box? *
30 m/s/s
20 m/s/s
10 m/s/s
5 m/s/s
Answer:
I believe the correct answer is 30m/s/s
PLEASE HURRY!!!
A student connects four AA batteries (1.5 V each) in series to light up a light bulb. The circuit has a resistance of 50 Ω. How much current flows through the circuit?
Answer:
0.3
Explanation:
The current flows through the circuit will be 0.03 A. Electric current is the ratio of the voltage and the current.
What is electric current?Electric current is defined as the ratio of the charge flow in a given time interval. It is denoted by I. It has the unit is ampere.
The given data in the problem is;
The voltage of the batteries is,V=1.5V
The electric current is,I=?
The resistance is,R=50 Ω
From Ohm's law;
[tex]\rm V= IR \\\\ I = \frac{V}{R} \\\\ I = \frac{1.5}{50} \\\\ I=0.03 \ amphere[/tex]
Hence, the current flows through the circuit will be 0.03 A.
To learn more about the electric current, refer to the link;
https://brainly.com/question/2264542
#SPJ2
a phosphorus atom needs to gain ---electrons to achieve a full octet
Answer:
Three (3).
Explanation:
The octet rule is a rule in chemistry that states that, chemical elements would either gain or loss electrons in their outermost shell in order to attain a stable electronic configuration i.e having eight (8) valence electrons in their outermost shell such as chemical elements found in group 8 (2-8-8) known as noble gas.
A phosphorus atom needs to gain three (3) electrons to achieve a full octet because the atomic number of phosphorus is 15 and as such it has the electronic configuration of 2-8-5 and needs three electron in order to become a stable element.
what is the role of energy in the conversation about climate change?
Answer:
Energy plays an important role in many aspects of our lives. For example, we use electricity for lighting and cooling.
Explanation:
Answer:
engery
Explanation:
What is the momentum of a 200 kg football player running west at a speed of 8m/s
Answer:
The answer is 1600 kgm/sExplanation:
The momentum of an object can be found by using the formula
momentum = mass × velocityFrom the question
mass = 200 kg
velocity / speed = 8m/s
We have
momentum = 200 × 8
We have the final answer as
1600 kgm/sHope this helps you
a 32kg object has a momentum of 480kg m/s northward. what is the objects velocity ?
Answer:
velocity = 15m/s
Explanation:
momentum of the object = 480kg/ms
nass of object = 32 kg
velocity of object = ?
momentum = velocity × mass
velocity = momentum / velocity
= 480kg/ms/32kg
= 15m/s
Does the mean molecular speed change as much as the temperature as the water heats up?
Which list ranks these jobs in the STEM career cluster based on years of schooling required, from most to least? Biochemist → Archivist → Engineering Technician → Civil Engineer Archivist → Biochemist → Civil Engineer → Engineering Technician Biochemist → Archivist → Civil Engineer → Engineering Technician Civil Engineer → Engineering Technician → Biochemist → Archivist
Answer:
The correct option is;
Biochemist → Archivist → Civil Engineer → Engineering Technician
Explanation:
1) Biochemist require the completion of a science degree or applied science degree, while biochemist usually hold a PhD to perform research independently, while entry level positions in the profession require a masters or bachelors degree
The PhDs usually require about 5 years to complete, after obtaining the masters degree
2) The general educational requirement to become an archivist is a master's degree in the fields of library science, history, public administration, political science, or archival science, which requires the completion of a bachelors degree followed by the completion of the masters degree which is thus 4 to 6 years
3) Civil engineer title is awarded to holders of a bachelors degree in Civil Engineering which gives the strong mathematical and science background required in the profession usually. The Civil Engineering program duration is five years
4) The engineering technician consist of 8.2% with masters degree, 42.0% have bachelors degree, while it is also possible to become an engineering technician with a GED or a high school degree
Therefore, the usual duration of study to become an engineering technician is two years of an associate degree program.
Answer:
C
Explanation:
A battery of emf 24v and terminal resistance 4 ohms is connected to a resistor of 32 ohms. What is the terminal pd of the battery?
Answer:
21.3V
Explanation:
Explanation
E = V + Ir
V = E- Ir
V = 24 - {(24/36) x 4}
V = 21.3V
An inclined plane of length 12m is used to pull a load of 3000N to height of 3m by applying an effort of 1000N. Calculate its MA, VR and efficiency. Also, find the work done in the machine
Answer:
MA = 4
VR = 3
e = 0.75 or 75%
work = 12000 [J]
Explanation:
The mechanical advantage in an inclined plane is defined as the relationship between the length of the inclined plane and the height of the plane with respect to the ground.
MA = L/h
MA = 12/3 = 4
Now the real advantage can be calculated as the relationship between the weight of the body and the force being applied.
VR = W/F
VR = 3000/1000
VR = 3
Efficiency can be calculated as the relationship between the real mechanical advantage over the ideal mechanical advantage.
e = VR/MA
e = 3/4
e = 0.75 or 75%
The work is defined as the product of the force by the distance, therefore we have:
work = F*d
work = 1000*12
work = 12000 [J]
George weighs 200 lb. what is his weight in Newtons (think metric, ha ha 1 kg=2.2 lb)
Answer:
889.644 newton
Explanation:
multiply the pound value by 4.448
(15 POINTS!!! 8th GRADE!!!!)can someone tell me what anaerobic exercise is? trying to bring grades up
Answer:
here
Explanation:
Anaerobic exercise is any activity that breaks down glucose for energy without using oxygen. Generally, these activities are of short length with high intensity. The idea is that a lot of energy is released within a small period of time, and your oxygen demand surpasses the oxygen supply.
True or False: The average American man and woman is overweight
Answer:
True
Explanation:
The average American is inching closer to being obese, CDC data shows. In overall weight, men gained an average of 8.5 pounds and women an average of 6.8 pounds between 1999 and 2016. In overall weight, men gained an average of 8.5 pounds and women an average of 6.8 pounds between 1999 and 2016.
A body moves with a velocity of 30.0 m/s.
This speed is increased to 40 m/s in 4.0s.
Calculate
a) the average acceleration of the body.
b) the distance covered by the body.
Polymetrics can help a person maintain cardiorespitory fitness T or F
Answer:
True
Explanation:
The term 'plyometrics' is used interchangeably with the term 'jump training'. The technique can be used for training in sports that require explosive movements.
if an object is moving and it changes its position by 2 m in every 4 s starting from the origin, then the position vs. time graph will be
Answer:
a straight line with a positive slope
Explanation:
Need HELP ASAP!!!!!!
The amplitude of a sound wave in air is doubled
Does the loudness increase decrease or stay the same?
Does the speed of the sound wave increases decreases or stay the same?
According to Darwin's theory of evolution, in which order do the steps of natural selection happen?
Some members of a population survive and reproduce their environment or location changes, and favorable traits
are passed on to offspring.
O A population's environment or location changes, some members survive and reproduce, and favorable traits are
passed on to offspring.
Favorable traits are passed on to offspring in a population, some members survive and reproduce, and the
environment or location changes.
Some members of a population survive and reproduce, favorable traits are passed on to offspring, and their
environment or location changes.
PLEASE HELP FAST!!
Answer:
The correct answer is B.
Explanation:
Darwin's theory of evolution is "A population’s environment or location changes, some members survive and reproduce, and favorable traits are passed on to offspring." So it's Option B.
Hopefully, this helps! :D
Ask your question below!
Answer:
B.
Explanation:
It's right in edge