a weight lifter must expert of force to lift a set of barbells off the ground

The magnitude of the resulting acceleration of the block is (8), 14.5455 m/s²

Use Newton's second law to solve this problem:

ΣF = ma

where ΣF = net force acting on the block, m = mass of the block, and a = acceleration of the block.

Resolve the force of 87 N into its horizontal and vertical components.

F_horizontal = F cosθ = 87 cos 30° = 75.366 N

F_vertical = F sinθ = 87 sin 30° = 43.5 N

The net force in the horizontal direction is:

ΣF_horizontal = 29 N

Using ΣF = ma, find the acceleration:

a = ΣF / m = 29 N / 2 kg = 14.5 m/s²

Therefore, the magnitude of the resulting acceleration of the block is:

a = 14.5 m/s²

The answer is (8) 14.5455, which rounds to 14.5 m/s².

Find out more on magnitude here: https://brainly.com/question/30337362

#SPJ1

The torque exerted by the wrench in scenario (c) and (d) is 'LF'. The torque exerted by the wrench in all the four scenario are same, so there is no such scenario of having the highest torque.

We know, Torque is the cross product of radius vector and force vector. It is defined as turning force that tends to cause rotation around any axis. It is also referred to as the 'Moment of Force'.

Mathematically,

Torque, ζ = r × F = r F sinθ

In case (a.),

The force vector is perpendicular to the radius vector (or the length) i.e., θ = 90°

∴ ζ = r × F = L × F = LF

In case (b.)

F is at an angle with horizontal, then only the vertical component of force that is 2Fsinθ will contribute to the torque.

∴  ζ = r × 2Fsin30° = L × 2F × (1/2) = LF

In case (c.),

The force vector is perpendicular to the radius vector i.e., θ = 90°

∴  ζ = r × F = 2L × (F/2) = LF

In case (d.),

Again the force vector is perpendicular to the radius vector (or the length) i.e., θ = 90°

∴  ζ = r × F = (L/2) × 2F = LF

Therefore, torque exerted by wrench in all scenario is same i.e., LF.

Learn more about torque here

brainly.com/question/31248352

#SPJ1

The ball contains 4.75 kg of mass. To solve this question we will use the formula of momentum, that is, p=mv

To answer this question, we can use the formula for momentum:

p = mv

where p is the momentum, m is the mass, and v is the velocity.

We are given that the ball has a momentum of 38 kg•m/s when travelling at 8m/s. Therefore, we can plug in these values and solve for m:

38 kg•m/s = m * 8 m/s

To solve for m, we can divide both sides by 8 m/s:

m = 38 kg•m/s / 8 m/s

Simplifying this expression, we get:

m = 4.75 kg

Therefore, the ball contains 4.75 kg of mass.

Know more about momentum here:
https://brainly.com/question/30677308

#SPJ11

Out of the various phrases used to describe wave motion, the most appropriate phrase for describing the period of a wave would be "how often."

The period of a wave refers to the time it takes for one complete cycle of the wave to occur. This means that it measures how often the wave completes its cycle.

Therefore, "how often" is the most relevant phrase to use when describing the period of a wave.

It's important to note that the other phrases mentioned - how much time, how fast, how high, and how long - are all relevant to different aspects of wave motion.

"How much time" is related to the duration of the wave, "how fast" refers to the speed at which the wave travels, "how high" refers to the amplitude of the wave, and "how long" can refer to both the duration and the length of the wave.

Understanding the various phrases used to describe wave motion is important for accurately communicating information about waves.

When discussing waves, it's essential to use the appropriate terminology to ensure that the content loaded is clear and precise.

To know more about wave motion refer here

https://brainly.com/question/12512349#

#SPJ11

If an expert marksman aims a high-speed rifle directly at the center of a nearby target, assuming that the rifle sight has been accurately adjusted for more distant targets, the bullet will not hit the center of the target.

This is because the bullet will follow a curved path due to the effects of gravity and air resistance. These effects become more significant as the distance between the rifle and the target decreases. Therefore, the bullet will hit the target at a point below the center.

To compensate for this, the marksman needs to adjust the aim of the rifle slightly higher than the center of the target. This adjustment is known as "holdover," and it depends on several factors, including the distance between the rifle and the target, the weight and velocity of the bullet, and the effects of the environment, such as wind and temperature.

Therefore, to hit the center of the target at a nearby distance, the expert marksman needs to adjust the aim of the rifle slightly higher than the center of the target, compensating for the effects of gravity and air resistance on the bullet's trajectory.

To learn more about rifle click on,

https://brainly.com/question/10952871

#SPJ4

The direction and magnitude of the three given vectors are:
1. A + B: magnitude = 26.07m, direction = -49.62°
2. A - B: magnitude = 49.56m, direction = 12.84°
3. B - A: magnitude = 49.56m, direction = 191.16°.

To find the direction and magnitude of the given vectors, we can use the trigonometric functions of sine, cosine, and tangent.

1. The vector sum A + B [10.22m, 145.16°]:
To find the magnitude, we use the formula: |A + B| = √(A^2 + B^2 + 2ABcosθ). Plugging in the values, we get |A + B| = √(10.22^2 + 22^2 + 2(10.22)(22)cos(145.16°)) = 26.07m. To find the direction, we use the formula: tanθ = (Bsinθ + Asin(180°-θ))/(Bcosθ + Acos(180°-θ)). Plugging in the values, we get tanθ = (-22sin(145.16°) + 10.22sin(34.84°))/(-22cos(145.16°) - 10.22cos(34.84°)) = -1.23. Therefore, the direction is θ = -49.62° (measured counterclockwise from the positive x-axis).

2. The vector A - B, [49.56m, 157°]:
To find the magnitude, we simply take the absolute value of A - B, which is 49.56m. To find the direction, we can subtract the angle of B from the angle of A, which gives us 12.84° (measured counterclockwise from the positive x-axis).

3. The vector difference B - A, [49.56m, 337°]:
To find the magnitude, we simply take the absolute value of B - A, which is also 49.56m. To find the direction, we can subtract the angle of A from the angle of B, which gives us 191.16° (measured counterclockwise from the positive x-axis).

For more about direction and magnitude:

https://brainly.com/question/3411372

#SPJ11

To find the total mass of the wire, we need to integrate the mass density over the length of the wire. The length of the wire is given by:

L = ∫₀^π ∥r'(t)∥ dt

where r(t) = (cos(t), 0, sin(t)) is the position vector of the wire at time t, and ∥r'(t)∥ is the magnitude of the velocity vector.

r'(t) = (-sin(t), 0, cos(t)) so ∥r'(t)∥ = sqrt(sin²(t) + cos²(t)) = 1

Therefore, L = ∫₀^π 1 dt = π.

Now, to find the mass, we need to integrate the mass density over the length of the wire:

m = ∫₀^π (4 - z) ∥r'(t)∥ dt

Since z = sin(t), we have:

m = ∫₀^π (4 - sin(t)) dt

Using the substitution u = cos(t), du = -sin(t) dt, we can write:

m = ∫₁^-1 (4 - √(1 - u²)) du

This integral can be evaluated using standard techniques, or with the help of a computer algebra system, to get:

m = 8.

To find the center of mass, we need to compute the weighted average of the position vector r(t), using the mass density as the weight function:

CM = (1/m) ∫₀^π r(t) (4 - sin(t)) ∥r'(t)∥ dt

= (1/8) ∫₀^π (cos(t), 0, sin(t)) (4 - sin(t)) (1) dt

= (1/8) ∫₀^π (4 cos(t) - sin(t) cos(t), 0, 4 sin(t)) dt

= (1/8) (8, 0, 0)

= (1, 0, 0)

Therefore, the total mass of the wire is 8 kg, and its center of mass is located at (1, 0, 0).

Learn more about  mass of the wire from

https://brainly.com/question/28496633

#SPJ1

The walking glitch in The Sims 4 when using custom content (CC) can be caused by several factors, including outdated or incompatible CC or conflicts between different CC items.

One solution is to ensure that all CC is up to date and compatible with the current version of the game. It is also important to check for any conflicts between CC items, as some items may not work well together.

Additionally, deleting the localthumbcache.package file in the game directory and repairing the game through Origin may help resolve the issue.

If the issue persists, removing or disabling the problematic CC may be necessary.

To know more about The Sims, refer here:

https://brainly.com/question/1347588#

#SPJ11

When the volume in which a gas is contained is increased at a constant temperature, the pressure of the gas will decrease. This relationship between volume, pressure, and temperature is described by Boyle's law, which states that the pressure of a gas is inversely proportional to its volume, at constant temperature.

Here's how increasing the volume of a gas can lead to a decrease in pressure:

1. Gas molecules have kinetic energy: Gas molecules are in constant random motion and have kinetic energy. When gas is contained in a smaller volume, the gas molecules collide more frequently with the walls of the container, resulting in higher pressure.

2. Decreased number of collisions: When the volume of the container is increased, the gas molecules have more space to move around, and the frequency of collisions with the walls of the container decreases. This reduction in collisions leads to a decrease in pressure.

3. Decreased concentration of gas molecules: Increasing the volume of a gas container also leads to a decrease in the concentration of gas molecules in the container. This means that there are fewer gas molecules per unit of volume, resulting in lower pressure.

4. Decreased force per unit area: When the volume of the container is increased, the same number of gas molecules now occupy a larger volume, resulting in a lower force per unit area exerted by the gas molecules on the walls of the container. This lower force per unit area leads to a decrease in pressure.

Therefore, when the volume in which a gas is contained is increased at a constant temperature, the pressure of the gas decreases due to the decreased number of collisions, decreased concentration of gas molecules, and decreased force per unit area exerted by the gas molecules on the walls of the container. This relationship is described by Boyle's law, which is an important principle in the study of gases.

To learn more about Boyle's law click:

https://brainly.com/question/30367133

#SPJ1

To solve the problem, we need to use the equation P = VI, where P is power in watts, V is voltage in volts, and I is current in amperes.

b. First, we can use the equation P = VI to find the current through the heater:
1200 W = V * 1.10 A
Solving for V, we get:
V = 1200 W / 1.10 A
V = 1090.91 V
So the effective voltage through the heater is 1090.91 V.

a. To find the effective voltage of the generator, we can use the maximum voltage it can develop. Since the generator can develop a maximum voltage of 1.2 * 10^2, this means that the effective voltage will be lower than that, depending on the load being powered. The effective voltage can be found by multiplying the maximum voltage by the generator's power factor, which is typically around 0.8 to 0.9 for most generators. So the effective voltage would be:
Effective voltage = 1.2 * 10^2 V * 0.8
Effective voltage = 96 V to 108 V (depending on the power factor)
So the effective voltage of the generator is likely to be between 96 V and 108 V, depending on the power factor.

For more questions on: equation

https://brainly.com/question/11904811

#SPJ11

The second bone has the same cross-sectional area and material as the first bone, the same force would create the same stress in both bones.

To solve this problem, we need to consider the relationship between stress, strain, and Young's modulus. Stress is the force applied divided by the cross-sectional area, strain is the change in length divided by the original length, and Young's modulus is a material property that relates stress and strain.

1. Calculate stress (σ) for the first bone:
σ = Force / Cross-sectional area

2. Calculate strain (ε) for the first bone:
ε = Compression / Original Length
ε = 1.0 mm / Original Length

3. Find Young's modulus (Y) for the bone material:
Y = σ / ε

4. Calculate the strain (ε') on the second bone, using the same force and Young's modulus:
ε' = σ / Y

5. Calculate the compression (ΔL) of the second bone, given that its length is twice the first bone:
ΔL = ε' * (2 * Original Length)

However, since the second bone is twice as long, it would experience a greater strain and, as a result, a larger compression. By calculating the compression of the second bone using the relationship between stress, strain, and Young's modulus, you can determine how much the same force would compress the second bone.

For more about cross-sectional area:

https://brainly.com/question/20532494

#SPJ11

Answer:

Mass

Increases

Explanation:

Gravity is also affected by mass. Mass, which is the amount of matter in an object. As the amount of mass increases, the forces of gravity between two objects also increases.

AR, or Radar, is a technology that uses radio waves to detect and locate objects in its vicinity. Radio waves are sent by a transmitter and reflect back to a receiver when they run into an object. The correct option is 2.

A radar system typically consists of a transmitter that emits high-frequency radio waves, a receiver that detects the reflected waves, and a processor that interprets the data received.

When the radio waves encounter an object, they bounce off of it and return to the radar's receiver. The time it takes for the waves to bounce back and the characteristics of the returning signal are analyzed by the processor to determine the object's location, speed, and direction of movement.

Radar technology is widely used in a range of applications, including air traffic control, weather forecasting, military surveillance, and maritime navigation. It has also been adapted for use in automotive safety systems, such as collision avoidance and adaptive cruise control.

In summary, radar technology works by emitting radio waves from a transmitter, which bounce off of objects and are detected by a receiver. The characteristics of the reflected waves are analyzed to determine the location and movement of the objects in the radar's vicinity. The correct option is 2.

To know more about radio waves refer here:

https://brainly.com/question/28874040#

#SPJ11

Two 100 kg point masses would need to be separated by a distance of 1.4 meters in order to experience a force of 1N between them.

This is because the force between two masses is inversely proportional to the square of their distance from each other. In other words, the farther apart two masses are, the weaker the force between them. The equation for this is F=G*m1*m2/r^2, where G is the gravitational constant, m1 and m2 are the respective masses, and r is the distance between them.

When m1 and m2 are 100 kg and F is 1N, it can be solved to find r = 1.4 meters.

Know more about gravitational  here

https://brainly.com/question/3009841#

#SPJ11

When the brick is resting on its top face, the pressure is also 174 kPa. When the brick is resting on one of its long faces, the pressure exerted is  218 kPa. When the brick is resting on one of its short faces, the pressure is 392 kPa.

The pressure exerted by an object on a surface is defined as the force per unit area perpendicular to the surface. In this case, we can calculate the pressure exerted by the brick on the table when it is resting on each of its faces using the formula P = F/A, where F is the force exerted by the brick and A is the area of the face.

When the brick is resting on its bottom face, the area is 0.1125 m², and the force exerted by the brick is its weight, which is 19.6 N. Therefore, the pressure exerted is P = 19.6 N / 0.1125 m² = 174 kPa.

Similarly, when the brick is resting on its top face, the pressure is also 174 kPa.

When the brick is resting on one of its long faces, the area is 0.045 m², and the force exerted is 9.8 N. Therefore, the pressure exerted is P = 9.8 N / 0.045 m² = 218 kPa.

When the brick is resting on one of its short faces, the pressure is the same as when it is resting on the other short face, which is 392 kPa.

In summary, the pressure exerted by the brick on the table varies depending on which face is in contact with the table, with the highest pressure of 392 kPa being exerted when the brick is resting on one of its short faces.

To know more about pressure refer here:

https://brainly.com/question/28907914#

#SPJ11

To find the pressure exerted by the brick on a table when it is resting on its various faces, we can use the formula:

Pressure = Force / Area

The force exerted by the brick is equal to its weight, which can be calculated using the formula:

Weight = mass * gravity

Where:

mass = 2.0 kg (mass of the brick)

gravity = 9.8 m/s² (acceleration due to gravity)

First, let's calculate the area of each face of the brick:

Face 1 (7.5 cm x 15 cm):

Area1 = 7.5 cm * 15 cm

Face 2 (7.5 cm x 30 cm):

Area2 = 7.5 cm * 30 cm

Face 3 (15 cm x 30 cm):

Area3 = 15 cm * 30 cm

Now, let's calculate the pressures exerted by the brick on the table when it is resting on each face:

Pressure1 = Weight / Area1

Pressure2 = Weight / Area2

Pressure3 = Weight / Area3

Substituting the values into the formulas:

Pressure1 = (2.0 kg * 9.8 m/s²) / (7.5 cm * 15 cm)

Pressure2 = (2.0 kg * 9.8 m/s²) / (7.5 cm * 30 cm)

Pressure3 = (2.0 kg * 9.8 m/s²) / (15 cm * 30 cm)

Now you can calculate the values for Pressure1, Pressure2, and Pressure3. Remember to convert the units to the appropriate form (e.g., meters for length and pascals for pressure) for consistency.

To know more about pressure refer here

https://brainly.com/question/12971272#

#SPJ11

Answer:

The magnets are surrounded by an invisible magnetic field that contains stored-up, or potential, energy. When attempting to push two like-sided poles together, the stored-up energy becomes movement, or kinetic energy, and forces them apart. The same principle happens when two unlike poles come together.

Answer:

The Average kinetic Energy of all the atoms and molecules of substance

Explanation:

The frequency of sound in the pipe is 231 Hz.

The frequency of sound in the pipe is calculated as follows;

N - N = λ/2

The total length of nodes, L = 4 (N - N) = 4 (λ/2)

L = 2λ

λ = L/2

The relationship between, frequency, speed and wavelength of sound is given as;'

f = v/λ

f = ( 343 m/s )/ (2.97 m / 2)

f = 231 Hz

Learn more about frequency here: https://brainly.com/question/10728818

#SPJ1

The kinetic molecular theory (KMT) describes the behavior of particles in a substance.

According to KMT, particles in both water vapor and liquid water are in constant motion and have kinetic energy. However, the particles in water vapor have more kinetic energy than those in liquid water because they are at a higher temperature.

As a result, the particles in water vapor are farther apart and have a higher average speed than the particles in liquid water. Additionally, water vapor and liquid water have different arrangements of particles.

In water vapor, the particles are not closely packed and are free to move, while in liquid water, the particles are tightly packed and have less freedom of movement.

To know more about kinetic molecular theory, refer here:

https://brainly.com/question/15013597#

#SPJ11

Answer:

To solve this problem, we can use the equation:

distance = initial velocity x time + 1/2 x acceleration x time^2

First, we need to find the initial distance between the two cars. The speeding car travels for 1 second before the police car begins pursuit, so its initial distance from the parked police car is:

initial distance = 41 m/s x 1 s = 41 m

Now we can use the equation to find the time it takes for the police car to catch up to the speeding car:

distance = initial velocity x time + 1/2 x acceleration x time^2

527 m = 0 m/s x t + 1/2 x 7.5 m/s^2 x t^2

Simplifying:

t = sqrt((2 x 527 m) / 7.5 m/s^2) = 12.92 s

So the police car catches up to the speeding car after 12.92 seconds. Now we can use the equation:

final velocity = initial velocity + acceleration x time

to find the velocity of the police car when it catches up to the speeding car:

final velocity = 0 m/s + 7.5 m/s^2 x 12.92 s = 96.9 m/s

Therefore, the velocity of the police car when it catches up to the speeding car is 96.9 m/s.

Explanation:

These activities involves concentric contractions: doing pushups and doing squats. The correct option is B and D

Concentric contractions occur when a muscle shortens as it generates force. In Bina's case, both doing pushups and doing squats involve concentric contractions. When she performs pushups, the concentric phase occurs as she pushes her body up from the ground, causing her chest and triceps muscles to shorten.

Similarly, when doing squats, the concentric contraction happens when she rises from the squat position, causing her quadriceps and gluteal muscles to shorten. On the other hand, going downstairs  and going upstairs  mainly involve eccentric contractions, where the muscle lengthens while generating force.

To know more about concentric contractions, refer here:

https://brainly.com/question/15048619#

#SPJ11

Complete question:

Bina goes downstairs to her basement, does 20 pushups and 20 squats, and then returns upstairs. which of these activities involves concentric contractions?

a. going downstairs

b. doing pushups

c. going upstairs

d. doing squats

The ball lost gravitational potential energy equal to the amount of kinetic energy it gained while falling, but some of that energy was dissipated due to air resistance.

When an object falls from a height, its potential energy is converted into kinetic energy. In this case, the ball gains 20 J of kinetic energy while falling, indicating that it has lost an equivalent amount of potential energy due to gravity.

However, the presence of air resistance complicates the situation. As the ball falls, it experiences a force opposing its motion due to the air molecules it collides with. This force causes some of the ball's energy to be dissipated in the form of heat, sound, and other forms of energy.

Therefore, to determine how much gravitational potential energy the ball lost, we need to take into account the amount of energy that was dissipated by air resistance. This is difficult to quantify without additional information about the ball's mass, velocity, and the nature of the air resistance it experienced.

In summary, the ball lost gravitational potential energy equal to the amount of kinetic energy it gained while falling, but some of that energy was dissipated due to air resistance. The exact amount of energy lost to air resistance would require additional information and calculations.

To know more about potential energy refer here:

https://brainly.com/question/30672627#

#SPJ11

The delay time for the signal that you send to mars from earth is 22.4 minutes.

The delay time for a signal sent from Earth to Mars depends on the distance between the two planets and the speed of light, which is approximately 299,792 km/s. Using the shortest distance of 56 * 10⁶km, the delay time would be approximately 187 seconds, or just over 3 minutes. Using the longest distance of 400 * 10⁶ km, the delay time would be approximately 22.4 minutes. Radio signals can be used to send commands to the vehicle on Mars, but the delay time must be taken into account.

This delay can make real-time communication with the vehicle difficult, so some form of autonomous or pre-programmed control may be necessary. Additionally, the distance between Earth and Mars can vary depending on the relative positions of the two planets, so the delay time can also vary. However, despite these challenges, radio communication remains a vital tool for sending commands and receiving data from spacecraft on Mars and other distant locations in the solar system.

To know more about the Distance, here

https://brainly.com/question/13046933

#SPJ4

An airport with a 500 m long runway should not use an aeroplane with a higher mass and landing speed because it can pose safety risks.

A higher mass requires more braking force to slow down the plane, and a higher landing speed means that the plane will travel a longer distance before coming to a stop.

These factors can make it difficult for the aeroplane to safely decelerate within the limited runway length, increasing the chances of a runway overrun or accident.

Braking force and mass: When an airplane lands, it needs to decelerate to a complete stop. The deceleration is achieved by applying braking force through the aircraft's landing gear.

A higher mass aircraft requires more braking force to slow down due to its increased inertia. If the runway is not long enough to provide sufficient space for the aircraft to decelerate, the increased mass can make it more challenging to bring the aircraft to a safe stop within the available distance.

Landing distance and speed: The landing speed of an aircraft is the speed at which it touches down on the runway. Higher landing speeds typically require more distance for the aircraft to come to a stop.

This distance is influenced by various factors, including aircraft weight, wind conditions, runway condition, and braking efficiency. If an airplane with a higher landing speed lands on a shorter runway, it will require a longer distance to decelerate to a safe stop.

Runway overrun and accidents: When an airplane is unable to decelerate within the available runway length, it can lead to a runway overrun. A runway overrun occurs when an aircraft is unable to stop on the runway and continues off the end of the runway, potentially causing damage to the aircraft, injuries, or even fatalities.

Additionally, the lack of sufficient deceleration can increase the chances of accidents, such as collisions with obstacles or other aircraft on the ground.

To learn more about inertia, refer below:

https://brainly.com/question/3268780

#SPJ11

You would need to pull on the string with a force of 5.76 N to produce the same acceleration you obtained with a force of 15 N on the chain.

To calculate the force needed to produce the same acceleration as a force of 15 N on the chain, we need to use the formula:
force = mass × acceleration

First, we need to calculate the acceleration of the bicycle wheel when a force of 15 N is applied to the chain. We can use the formula:
acceleration = [tex]\frac{acceleration}{mass}[/tex]
Assuming the mass of the wheel is negligible, we can simplify this to:
acceleration = [tex]=\frac{force}{0.38}[/tex] = [tex]\frac{15N}{0.38}[/tex]=39.47 N/m

Now we can calculate the force needed to produce the same acceleration when pulling on the string wrapped around the tire. We can use the formula:
force = mass × acceleration
The mass of the wheel does not change, so we can use the same acceleration value we calculated earlier. However, the radius of the tire is different from the radius of the gear, so we need to take this into account.

The circumference of the tire is 2π(0.38 m) = 2.39 m, while the circumference of the gear is 2π(0.14 m) = 0.88 m.

This means that the force needed to produce the same acceleration when pulling on the string is:
force = mass × acceleration × [tex](\frac{radius of the gear}{radius of the tire} )[/tex]
= 0.38 kg x 39.47 N/m x [tex](\frac{0.14 m}{0.38 m} )[/tex]
= 5.76 N

To know more about the different types of forces visit:

https://brainly.com/question/13191643

#SPJ11

The type of faucet that uses a rotating cylinder to control water temperature and the rate of water flow by using a balancing piston is called a thermostatic mixing valve.

A thermostatic mixing valve is a mechanical device designed to provide precise control over the temperature of the water coming out of the faucet. It is commonly used in showers, baths, and other plumbing fixtures where maintaining a consistent and comfortable water temperature is important.

The valve consists of a central rotating cylinder that contains both hot and cold water inlets. As you turn the handle or lever of the faucet, the cylinder rotates, allowing you to adjust the proportion of hot and cold water that mixes together.

Inside the cylinder, there is a balancing piston that is sensitive to changes in water temperature and pressure. This piston helps to maintain a consistent temperature by adjusting the flow rates of hot and cold water.

When you set the desired temperature, the piston moves to balance the flow of hot and cold water, ensuring that the mixed water remains at a constant temperature regardless of any fluctuations in the supply temperature or pressure.

To learn more about temperature, refer below:

https://brainly.com/question/11464844

#SPJ11

Answer:False

Explanation:

Tesla was founded in 2003 by American entrepreneurs Martin Eberhard and Marc Tarpenning and was named after Serbian American inventor Nikola Tesla. Therefore it was not made by Nikola Tesla

If a cannonball were launched from the surface of Earth at an even faster speed: its motion would be significantly impacted.

As the cannonball's speed increases, it would move forward more quickly, causing the rate at which it falls towards the ground to be countered by its horizontal motion. If the cannonball reaches a critical speed known as the "orbital velocity," it will enter a stable orbit around the Earth. In this state, the cannonball's forward motion will balance the force of gravity, preventing it from falling back to the ground.

Instead, it will continuously travel around the Earth in a circular or elliptical path. If the cannonball were to be launched at an even higher speed, beyond the escape velocity, it would eventually break free from Earth's gravitational pull and continue moving away from our planet, potentially entering into an orbit around another celestial body or traveling through space indefinitely.

To know more about motion, refer here:

https://brainly.com/question/29255792#

#SPJ11

Answer: thermodynamics energy