A vertical spring scale can measure weights up to 225 N . The scale extends by an amount of 12.5 cm from its equilibrium position at 0 N to the 225 N mark. A fish hanging from the bottom of the spring oscillates vertically at a frequency of 2.65 Hz. Ignoring the mass of the spring, what is the mass m of the fish?

Answer:

the distance is 315.3696 m

Explanation:

The computation of the distance is given below:

Given that

Sound intensity = 1.67 × 10^-6 W/m^2

And, the distance = 233 m

Now as we know that

Power = Intensity × surface area

1.67 × 10^-6 × 4π(233)^2 = 1.67 × 10^-6 ÷ 2× 4π × d^2

d^2 = 2 × (223)^2

= √2 × 223

= 315.3696 m

Hence, the distance is 315.3696 m

Answer:

I ATE APPLE PIE YESTERDAY

Explanation:

The complete options are;

A. The average kinetic energy of their particles is the same.

B. The total kinetic energy of their particles is equal.

C. Heat flows from the larger object to the smaller object.

D. Heat flows from the object with higher potential energy to the object with lower potential energy.

Answer:

Explanation:

From the relationship between average kinetic energy and temperature, we have the formula;

E_k = (3/2)kT

Where;

k is a constant known as boltzmann constant.

T is known as temperature

We can see that at the same temperature (T), kinetic energy will remain the same because from the formula, E_k depends km only the temperature.

Thus, average kinetic energy of their particles saying that.

Volumes can be transfered to liters only when their measurement units are dm³. a) Which means that: 0.45m³=450dm³ you move the decimal place three places to the right because m³ is larger measurement unit than dm³. 375 cm³ = 0.375 dm³; 75cl = 0.75l because of the prefix centi. 0.6dm³ = 0.6 dm³

So it will be 450l; 0.375l; 0.75l; 0.6l

b) 450l>0.75l>0.6l>0.375l

0.45m³>75cl>0.6dm³>375cm³

I hope i didn't make a mistake, but it would be good if somebody else answered too, so you can compare the answers and see if i made a mistake

The given volumes in liter will be 450 L, 0.375 L, 0.75 L, 0.6 L and the arrangement in descending order will be 450 L > 0.75 L > 0.6 L > 0.37 L .

Every three-dimensional item takes up space in some way. The volume of this area is what is used to describe it. The area covered within an entity's three-dimensional bounds is referred to as its volume. The object's size is another name for it.

As per the given information in the question,

a.

The given volume in a meter cube is 0.45.

Unit conversion:

1 m³ = 1000 L

So, 0.45 m³ = 0.45 × 1000

= 450 L

The given volume in a centimeter cube is 375.

Unit conversion:

1 cm³ = 0.001 L

375 cm³ = 0.001 × 375

= 0.375 L.

The given volume in a centiliter cube is 75.

Unit conversion:

1 cl³ = 0.01 L

75 cl³ = 75 × 100

= 0.75 L

The given volume in the decimeter cube is 0.6.

1 dm³ = 1 L

0.6 dm³  = 0.6 L

b.

So, the volumes in descending order will be,

450 L > 0.75 L > 0.6 L > 0.37 L or,

0.45 m³ > 75 cl³ > 0.6 dm³ > 375 cm³

To know more about Volume:

https://brainly.com/question/13338592

#SPJ2

Answer:

1.74

Explanation:

right on acellus

Answer:

1.74

Explanation:

acellus

The entire park area is considered to be a semi-arid desert, but distinct habitats are located at different elevations along the 8,000-foot elevation gradient. Near the Colorado River, riparian vegetation and sandy beaches prevail.

A). force

hope it helps and your day will be full of happiness

Answer:

(d) 0.15 N

Explanation:

mass of the fish, m₁ = 65 g = 0.065 kg

initial velocity of the fish, u₁ = 0

mass of water expelled by the fish, m₂ = 0.30 g = 0.0003 kg

time during which the water was expelled, t = 5.0 ms = 5.0 x 10⁻³ s

velocity of the water, v = 2.5 m/s

The magnitude of force of the exerted water is equal to the magnitude of force the fish exerted on the water.

The magnitude of force of the exerted water is calculated as follows;

[tex]F = ma = m\frac{v}{t} \\\\F = \frac{mv}{t} \\\\F = \frac{m_2 \ \times \ v}{t} \\\\F = \frac{0.0003 \ \times \ 2.5}{5 \times 10^{-3}} \\\\F = 0.15 \ N[/tex]

The correct option is D.

Therefore, the average force the fish exerts on the drop of water is 0.15 N.

Answer:

Ice is the solid state of water, a normally liquid substance that freezes to the solid state at temperatures of 0 °C (32 °F) or lower and expands to the gaseous state at temperatures of 100 °C (212 °F) or higher.

Explanation:

Answer:

I think is is

Explanation:

B and C why because i have a gut feeling

Answer:

D.Conduction, because the metal wire was in direct contact with water in both containers

Conduction, because the metal wire was in direct contact with water in both containers.​ Option D is correct.

Given that,
Students filled two cups with water. One cup contains 100mL of cold water while the other has 100 mL of hot water. A metal heat wire is placed inside the water of both cups and thermometers are attached to each cup.
It is to be identified, the system contains which type of heat transfer between the cups

Heat transfer is the process, in a thermodynamic system, when an object at a higher temperature is placed with an object at has a lower temperature, after some time the system attains equilibrium because heat flows from higher temperature to lower temperature.

In the given question,
Cups, that are connected through a metal wire, one is hot and the other is cold, Principal of conduction state that when there is a system of connected bodies the heat flows throughout the connected system till the thermal equilibrium attain. Implies heat flow from hot cup to cold cup through the wire through conduction heat transfer.

Thus, Conduction, because the metal wire was in direct contact with water in both containers.​ Option D is correct.

Learn more about heat transfer here:
https://brainly.com/question/20699475

#SPJ2

Answer: D. The object would have an acceleration of 6 m/s/s to the right.

Explanation:

I got it right on USA test prep

Complete question

To reduce the drag coefficient and thus to improve the fuel efficiency, the frontal area of a car is to be reduced. Determine the amount of fuel and money saved per year as a result of reducing the frontal area from 18 to 14 ft2. Assume the car is driven 12,000 mi a year at an average speed of 55 mi/h. Take the density and price of gasoline to be 50 lbm/ft3 and $3.10/gal, respectively; the density of air to be 0.075 lbm/ft3, the heating value of gasoline to be 20,000 Btu/lbm; and the overall efficiency of the engine to be 30 percent. Take the drag coefficient as CD=0.3 for a passenger car.

Answer:

22.22%

$57

Explanation:

From the question we are told that

Initial area of frontal area [tex]a_1=18ft^2[/tex]

Final area of frontal area [tex]a_2=14ft^2[/tex]

Distance covered a year [tex]D=12000mile[/tex]

Average speed a year [tex]V_{avg}=55mile/h[/tex]

Density [tex]\rho=50 lbm/ft3[/tex]

Price [tex]P= $3.10/gal[/tex]

Density of air [tex]\rho_{air} 0.075 lbm/ft3[/tex]

Heating value of gasoline [tex]Q=20,000 Btu/lbm[/tex]

Efficiency [tex]\eta=30\%[/tex]

Drag coefficient [tex]CD=0.3[/tex]

[tex]\triangle A=18-14ft^2=4ft^2[/tex]

Generally the equation for drag force [tex]C_D[/tex] is mathematically given as

[tex]F_D=\frac{C_DAPV^2}{2}[/tex]

[tex]F_D=\frac{0.3*18*0.075*(80.685^2)*A}{2}[/tex]

[tex]F_D=73.24Alb[/tex]

where [tex]v=55mil/h*1.467=80.685ft/s[/tex]

Generally the equation for work done W is mathematically given as[tex]W=F_D*L[/tex]

where [tex]L=12000mile*5280[/tex]

[tex]L=63360000[/tex]

[tex]W=73.24A*63360000[/tex]

[tex]W=4.6*10^9A[/tex]

Generally the equation for overall efficiency [tex]\eta[/tex] is mathematically given as

where

[tex]W_{req}=required\ gasoline\ power\ efficiency[/tex]

[tex]\eta=\frac{W}{W_{req}}[/tex]

[tex]W_{req}=\frac{W}{\eta}[/tex]

[tex]W_{req}=\frac{4.6*10^9}{0.3}[/tex]

[tex]W_{req}=1.55*10^{10}A[/tex]

Generally the equation for reduction fee with change in frontal area [tex]\triangle M[/tex] is mathematically given as

[tex]\triangle M =\triangle Vgasoline*cost[/tex]

Where

[tex]\triangle Vgasoline= volume\ reduction\ of\ gasoline[/tex]

[tex]\triangle Vgasoline=\frac{E_{req}}{H*P}[/tex]

[tex]\triangle Vgasoline=\frac{1.55*10^{10}A}{20000*778.169*32.2*50}[/tex]

if

[tex]20000btu/ibm=20000*778.169*32.2(1bm.ft^2/s)[/tex]

[tex]\triangle Vgasoline=\frac{1.55*10^{10}A}{20000*778.169*32.2*50}[/tex]

[tex]\triangle Vgasoline=0.61859A[/tex]

Therefore

[tex]\triangle M =0.61859A*3.10[/tex]

if [tex]1ft^2=7.48gal[/tex]

[tex]\triangle M =0.61859(4)*3.10*7.48[/tex]

[tex]\triangle M = \$ 57.671[/tex]

Generally the equation for reduction of fuel [tex]F_r[/tex]is mathematically given as

[tex]F_r=\frac{\triangle A}{\triangle i}*100[/tex]

where

[tex]\triangle i=18ft^2[/tex]

[tex]F_r=\frac{4}{18}*100[/tex]

Fuel reduction price by reducing front area is 22.22%

Money saved per year is $57

Answer:

Fs = 17.66 N

Explanation:

The force of static friction is given by the following formula:

[tex]F_s = \mu R = \mu W\\[/tex]

where,

Fs = The force of static friction = ?

μ = coefficient of static friction = 0.9

W = weight of sneakers = mg

m = mass of sneakers = 2 kg

g = acceleration due to gravity = 9.81 m/s²

Therefore,

[tex]F_s = \mu mg\\F_s = (0.9)(2\ kg)(9.81\ m/s^2)\\[/tex]

Fs = 17.66 N

Answer:

put it in a volcano

Explanation:

The magnitude of the angular acceleration of the pendulum at the moment of release is; α = 18.45 rad/s²

We are given;

Mass of rod; m = 1 kg

Length of rod; L = 49.8 cm = 0.498 m

Mass of Disk; M = 4 kg

Radius of disk; r = 24.9 cm = 0.249 m

Let us first calculate the torque acting from the formula;

τ = mg(L/2) + MgL

Thus;

τ = (1 × 9.8 × (0.498/2)) + (4 × 9.8 × 0.498)

τ = 21.96 N.m

Using parallel axis theorem, we can find the moment of inertia about the given axis as;

I = (mL²/3) + ½MR² + ML²

Plugging in the relevant values gives;

I = (1 * 0.498²/3) + ½(4 * 0.249²) + (4 * 0.498²)

I = 1.19 kg.m²

The angular acceleration is given by the formula;

α = I/τ

α = 21.96/1.19

α = 18.45 rad/s²

Read more at; https://brainly.com/question/23321366

Answer:

The answer is "0.91238 and 744.8"

Explanation:

In this scenario it is easier to take a person to the water-pool than to transport the people in the air, as the person's strength is increased by water upwards:

[tex]f_b \to m \to mg =person \\\\F_B \ in\ air = v\ & air\ g \\\\[/tex]

               [tex]=0.076 \times 1.225 \times 9.8 \\\\ =0.91238 \ N\\\\[/tex]

[tex]F_B \ in \ water = v \& water \ g \\\\[/tex]

                    [tex]=0.076 \times 1000 \times 9.8\\\\= 744.8 \ N\\[/tex]

Answer:

Option C, the current is constant through the wire.

Explanation:

Ok, so we know that as larger cross-section we have, smaller resistance, so makes sense to think that the current will be larger in the first piece of wire.

But now let's think in a simpler case.

Suppose that in the image we see pipes, and through these pipes, there is water flowing.

You would say that the water flow in WX is larger than the current in XY?

No, it can´t be, the volume of water that leaves WX in a lapse of time Δt, must be the exact same volume of water that enters XY in that lapse of time, then the water flow is constant.

The only thing that can happen is that the velocity at which the water moves in WX is smaller than the velocity at which the water moves in the other parts.

The same thing happens here, the current will be constant, and the thing that changes is the velocity at which the electrons flow in each part of the wire.

So if you actually had a wire like this, you would see that the thinner parts heat a lot more than the others, and this happens because the electrons in those parts have a lot more kinetic energy.

The correct graph is C.

Answer:

The train is traveling 18 meters per second.

Explanation:

540/30 = 18

To check your answer do 18 * 30 and it equals 540

Answer:

220.7

Explanation:

distance traveled is 1.5*5=7.5m

PE gain is MGH=3*9.81*7.5=220.7

Answer: High pass filters, and in particular LC high pass filters are used in many RF applications where they block the lower frequencies and allow through higher frequency signals. Typically LC filters are used for the higher radio frequencies where active filters are not so manageable, and inductors more appropriate.

Answer:

high pass filters and in particular LC high pass filter are used in many RF application where they block the lower frequencies and allow through higher frequency signals. Typically LC filters are used for the higher radio frequencies where active filters are not so manageable and indicators more appropriate

Answer:

are nearby and bright i hope this helps

Answer:

A fundamental theory that provides a description of the physical properties of nature at the scale of atoms and subatomic particles.

Explanation:

Answer:

Given,

Mass, m = 2kg

Height or distance, s = 20m

Initial velocity, u = 0m/s

Acceleration due to gravity, g = 10m/s (It is 9.8m/s but can be assumed 10m/s for simplifying calculations)

(Because the object is is just dropped)

Final velocity, v = ?

Solution

v^2 = u^2 + 2as (u^2 means u raised to power 2)

=> v^2 = 0^2 + 2*10*20

=> v^2 = 400

=> v = 20

Thus the velocity just before the body strikes the ground will be 20m/s.

Answer:

D

Explanation:

A disturbance that travels through a medium with a transfer of matter and without a transfer of energy best describes a wave. Option D  best describes a wave.

A wave is a phenomenon that flows across a material medium without leaving any lasting mark. Mechanical or electromagnetic waves can be used to classify it. Transverse and longitudinal are the two main forms.

Wave motion that is parallel to the wave direction is described as longitudinal wave.

A wave is a disturbance that moves across a medium with a transfer of matter , but not an energy transfer.

A disturbance that travels through a medium with a transfer of matter and without a transfer of energy best describes a wave.

Hence, option D  best describes a wave

To learn more about the wave, refer to the link;

brainly.com/question/3004869

#SPJ2

Answer:

Hello your question is incomplete hence I will give you a general answer as regards rotation of vector matrix assuming angle of rotation  = [tex]\frac{\pi }{4}[/tex]

answer :

angle of rotation = [tex]\frac{\pi }{4}[/tex]

vector matrix produced = attached below

Explanation:

lets assume the vector matrix [ 6, -2 ] is rotated clockwise by an angle of [tex]\frac{\pi }{4}[/tex]

The resultant matrix = attached below

Result of the rotation =  attached below

attached below is the detailed solution

Answer: I got it right on Edmentum

Explanation: Answers attached below

Answer:

The answer is C, I just guessed and got it right lol

Explanation:

a. 75 kg, The mass of an object is the amount of matter that constitutes that object and is independent of the acceleration of gravity and is constant under any circumstances.

_________________________________

b. Weight = mass × gravity acceleration

♡ On the Earth : Weight = 75 × 10

Weight = 750 N

♡ On the Venus : Weight = 75 × 8.87

Weight = 665.25 N