The total length of the wire required is 63 m.
What is current?The current is the stream of charges which flow inside the conductors when connected across the end of voltage.
Given is a solenoid is configured to produce a magnetic field of 0.027T at its center. it has radius 1.4 cm and length 40cm and the wire can carry a maximum current of 12.0 A.
Radius, r = 1.4cm = 0.014 m
Length l = 40 cm = 0.4 m
If the current is I, then the magnetic field in solenoid is given by
B = μ₀ n I
By substituting the values, we get
0.027 = 4π x 10⁻⁷ x n x 0.4
n = 1792 turns/unit length
Total length of wire = circumference x Turns
L = 2πr x N
where N = nl
Plug the values, we get
L = 2π x 0.014 x1792 x 0.4
L = 63 m
Thus, the total length of the wire is 63 m.
Learn more about current.
brainly.com/question/10677063
#SPJ1
Examples of kinetic theory of convection
Answer:
example of kinetic theory include brownian motion the random movement of the particles because the consolation with the air molecules and how gas is behave boiling and j l also this cyclone explain how temperature affects the
6. Yeast needs oxygen to create a chemical reaction in which of the following?
A. Aerobic reactions and anaerobic reactions.
B. Anaerobic reactions only.
C. Fermentation
D. Aerobic reactions only.
Answer:
D
Explanation:
Anaerobic Respiration only
(a) that the acceleration (A) will have no components that are identically zero. (B) may have some components that are identically zero. (C) will have only a z component that is identically zero. (D) will have an identically zero z component, and maybe an identically zero component in the x or y directio
Answer:
D.
Explanation:
acceleration in the z component = velocity in z component / time. The question states velocity in z component is zero. Therefore, acceleration in z component = 0/time = 0.
Now the question does not specify whether the other velocity vectors (x or y) is zero or not. So its D.
Which observations most likely led to Jenna’s conclusion?
a change of odor
a decrease in temperature
a change in moisture content
a decrease in mass
The findings that most likely contributed to Jenna's conclusion were a change in smell. Option A is correct.
What is odor?A fragrance, usually an unpleasant one: The smell of sweaty feet was palpable throughout the space. Our body odor has a big impact on the kinds of scents we enjoy.
The complete question is;
"Jenna pulled out an open bowl of leftover mashed potatoes from the fridge and smelled something different. She discovered that since the potatoes were initially placed there, chemical changes had taken place. Which facts most likely supported Jenna's judgment?
a change of odor
a decrease in temperature
a change in moisture content
a decrease in mass"
The observation that most likely inspired Jenna to draw her conclusion was a change in odor.
Hence, option A is correct.
To learn more about the odor refer;
https://brainly.com/question/5396055
#SPJ1
Answer:
A change in odor
Explanation:
The diagram shows changes of state between solid, liquid, and gas. The atoms of a substance lose energy during a change of state. Before the change, the atoms are close together but are able to slide past one another.
A diagram has a triangle at center with gas on top, liquid on bottom right, solid on bottom left. An arrow from gas to liquid is labeled O, and an arrow from liquid to gas is labeled N. An arrow from solid to liquid is labeled P, and an arrow from liquid to solid is labeled Q. An arrow from solid to gas is labeled L, and an arrow from gas to solid is labeled M.
Which arrow represents the change of state described above?
M N P Q
Answer:
its Q
Explanation:
How to add two on/off switches that can change the brightness of the light in circuit a without turning it off
Answer:
ressistor
Explanation:
a transverse wave passes through a slinky
Last one!
Perpendicular to the wave's energy
Hope this helps!
B
Which actions most likely cause the domains within a material to lose their alignment and become more
randomized? Check all that apply.
heating the material
Orubbing the material against a magnet
O passing electricity around the material
O placing the material in a magnetic field of opposite polarity
O placing the material near a strong magnet
O hitting the material
Mark this and return
Next
Submit
Answer: 2, 3, and 5
Explanation:
The pendulum below swings in periodic motion between point A and point B. At which point does the pendulum have the least potential energy?
The pendulum have the least potential energy at the point C between point A and B because it is lower in height as compared to other points.
What is potential energy?Potential energy is the energy held by an object because of its position. If the object is present at a certain height, it has more potential energy as compared to object which is lower in height.
So we can conclude that the pendulum have the least potential energy at C point that is between point A and B.
Learn more about energy here: https://brainly.com/question/13881533
#SPJ1
PLEASE HELP ASAP!!!
Describe the two forces that form mid-ocean ridges and ocean trenches
Ridge push refers to the pressure exerted by the excess height of the mid-ocean ridge, while Slab pull refers to the force exerted by the weight of the subducted slab on the plate it is attached to.
Two forces that form mid-ocean ridgesThe two forces that form mid-ocean ridges are ridge-push and slab pull.
What is Ridge push?Ridge push refers to the pressure exerted by the excess height of the mid-ocean ridge.
What is Slab pull?Slab pull refers to the force exerted by the weight of the subducted slab on the plate it is attached to.
Learn more about mid-ocean ridges here: https://brainly.com/question/24450451
#SPJ1
2) A skier stands at rest and begins to ski downhill with an acceleration of 3.0 m/s² {downhill). What is
her displacement after 15.0 seconds?
Answer:
her displacement s=337.5m
Explanation:
check out the above attachment ☝️
Displacement after 15.0 seconds s= 337.5 m
What is acceleration?
The rate of change of velocity is called acceleration.
Acceleration. speed is the charge of the exchange of displacement. Acceleration is the charge of the exchange of speed. velocity is a vector quantity because it consists of each significance and direction. Acceleration is also a vector quantity as it's far just the fee of alternate of pace.
Acceleration of 3.0 m/s²
Time= 15.0 seconds
S= ut + 1/2 at²
S = 0+0.5*3*15*15
=337.5 m
Learn more about acceleration here:-https://brainly.com/question/460763
#SPJ2
A projectile is launched at an angle of 29 degrees above the horizontal with an initial velocity of 36.6 at an unknown height.
The magnitude of the vertical velocity upon returning to its original, unknown height is _____ m/s.
The magnitude of the unknown height of the projectile is determined as 16.1 m.
Magnitude of the height
The magnitude of the height of the projectile is calculated as follows;
H = u²sin²θ/2g
H = (36.6² x (sin 29)²)/(2 x 9.8)
H = 16.1 m
Thus, the magnitude of the unknown height of the projectile is determined as 16.1 m.
Learn more about height here: https://brainly.com/question/1739912
#SPJ1
when a boy jumps into a pool
Answer:
energy only
Explanation:
Water waves transfer energy via oscillations of the water molecules, but the the water molecules themselves do not move along the wave.
This is why when the boy jumps into the water, his kinetic energy is transferred by the water molecules across the pool, but neither the boy nor the water particles move along with the wave.
A boy throws a ball vertically up it returns the ground after 10 seconds find the maximum height reached by the ball
Answer:
Approximately [tex]122.625\; {\rm m}[/tex] (assuming that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex], the ball was launched from ground level, and that the drag on the ball is negligible.)
Explanation:
Let [tex]v_{0}[/tex] denote the velocity at which the ball was thrown upward.
If the drag (air friction) on the ball is negligible, the ball would land with a velocity of exactly [tex](-v_{0})[/tex]. The velocity of the ball would be changed from [tex]v[/tex] to [tex](-v_{0})\![/tex] (such that [tex]\Delta v = (-v_{0}) - v_{0} = (-2\, v_{0})[/tex]) within [tex]t = 10\; {\rm s}[/tex].
Also because the drag on the ball is negligible, the acceleration of the ball would be [tex]a = -g = -9.81\; {\rm m\cdot s^{-2}}[/tex]. Thus:
[tex]\Delta v = a\, t = 10\; {\rm s} \times (-9.81\; {\rm m\cdot s^{-2}}) = -98.1\; {\rm m\cdot s^{-1}}[/tex].
Since [tex]\Delta v = (-2\, v_{0})[/tex]:
[tex]-2\, v_{0} = \Delta v = -98.1\; {\rm m\cdot s^{-1}[/tex].
[tex]\begin{aligned}v_{0} &= \frac{-98.1\; {\rm m\cdot s^{-1}}}{-2}= 49.05\; {\rm m \cdot s^{-1}}\end{aligned}[/tex].
The ball reaches maximum height when its velocity is [tex]v_{1} = 0\; {\rm m\cdot s^{-1}}[/tex]. Apply the SUVAT equation [tex]x = ({v_{1}}^{2} - {v_{0}}^{2}) / (2\, a)[/tex] to find the displacement [tex]x[/tex] between the original position (ground level, where [tex]v_{0} = 49.05\; {\rm m\cdot s^{-1}}[/tex]) and the max-height position of the ball (where [tex]v_{1} = 0\; {\rm m\cdot s^{-1}}[/tex].)
[tex]\begin{aligned}x &= \frac{(0\; {\rm m\cdot s^{-1}})^{2} - (49.05\; {\rm m\cdot s^{-1}})^{2}}{2 \times (-9.81\; {\rm m\cdot s^{-2}})} \\ &\approx 122.625\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
any three methods to increase efficiency of a simple machine?
Answer:
lubricant (decrease friction).
control production speed.
use only when required.
A firework with a mass of 1.5 kg shoots up into the air with a velocity of 25 m/s. It then explodes. Use this information to work out the total momentum of all the pieces after the firework explodes
Answer:
37.5 kg⋅m/s
Explanation:
p = mv
p = (1.5)(25) = 37.5 kg⋅m/s
Momentum is conserved in all collisions and explosions!
Which planet in our solar system, discovered in 1781, was named after the greek god of the sky?.
Answer:
i think the planet is Uranus
An astronomer wants to observe a cloud of dust in a relatively close part of the Galaxy. Unfortunately, this dust cloud is not located in the direction of a crowded region of stars. What instrument would be the most help in finding this cloud. Group of answer choices a visible-light telescope (like the Keck) with a camera or CCD detector a spectroscope that can search for the line radiation from highly ionized atoms an x-ray telescope in orbit around the Earth a sensitive infra-red telescope in orbit around the Earth
The instrument that would be the most help in finding this cloud is D. a sensitive infra-red telescope in orbit around the Earth.
What is an astronomer?It should be noted that an astronomer is a scientist who focuses on the study of the Earth.
In this case, the instrument that would be the most help in finding this cloud is a sensitive infra-red telescope in orbit around the Earth.
Learn more about astronomy on:
brainly.com/question/1141458
#SPJ12
If the current in each wire is the same, which wire produces the strongest magnetic field?.
When the sun runs out of hydrogen in its core, it will become larger and more luminous because:.
Answer:
Because the size of the star has expanded, the surface cools down and goes from white-hot to red-hot. Because the star is brighter, redder and physically larger than before, we dub these stars "red giants"
Gerry is looking at salt under a powerful microscope and notices a crystalline structure. What can be known about the salt sample that Gerry is looking at?
The atoms have spread out from each other.
The atoms are sliding past each other.
The atoms have no particular pattern.
The atoms are vibrating in place.
i know it is c
here is the answer
Select the definition that best describes the term “ultimate tensile strength.”
Ultimate tensile strength is the maximum stress that a material can withstand just before fracture.
What is stress?
Stress is defined as the force acting per unit area. It is denoted by Sigma(σ)
When a body is undergoing stretch by applying a pull force, it stretches more and more until it reaches its elastic limit. A point comes when the body no more stretches and breaks or fractures at bottle neck formation. This strength of any material is known as Ultimate breaking Stress or Ultimate tensile strength.
Thus, Ultimate tensile strength is the maximum stress that a material can withstand just before fracture.
Learn more about Stress.
https://brainly.com/question/12871096
#SPJ1
Assuming a current is flowing, what increases the strength of the magnetic field of a coiled electrical wire?.
Answer:The amount of current flowing
Explanation:this derives from amperes law of maxwell’s equations. It’s easiest to see in differential form. The curl of the magnetic field is proportional to the current plus the change (time derivative) in electric field
If a volume of air is warmed, it expands and tends to
if a volume of air is warmed it expands due to increased translational kinetic energy as it expands it will start to cool.
When does temperature increase volume?We can then conclude that at constant pressure, temperature and volume are directly proportional: temperature increases, volume increases; decrease temperature, decrease volume.
In this case, the higher the temperature, the greater the kinetic energy that acts on the molecules of this gas, so when the gas expands, these molecules find more space and collide less, which will cause the gas to cool.
See more about volume at brainly.com/question/1578538
#SPJ12
When you see a quantity like 20 m/s N, how do you know that it's a vector quantity and not a scalar quantity?
We know that 20 m/s N is a vector quantity because N in the expression signifies the direction
What is a vector quantity?This is a which have both magnitude and direction. Example include:
VelocityDisplacementForceAccelerationMomentWeightHow to determine whether 20 m/s N is a vector quantity20 m/s indicates just the speed i.e magnitude20 m/s N indicates the speed i.e magnitude why the N indicates the direction.Thus, we can conclude that 20 m/s N is a vector quantity because it has both magnitude and direction.
Learn more about scalar and vector quantity:
brainly.com/question/774036
#SPJ12
calculate the heat energy required to increase the temperature of 10 kg of water from 25 degrees Celsius to 115 degrees Celsius
Answer:
3 767 400 joules
Explanation:
4.186 J/g-C is the specific heat of water
25 to 115 is 90 degrees C change
10 000 g is 10 kg of water
10 000 * 90 * 4.186 = 3 767 400 Joules
If you push a 200 kg box with a horizontal force of 1,172 N and kinetic friction resists the motion with a force of 962 N, what is the resultant acceleration in m/s2
Answer:
a = 1.05m.s²
Explanation:
Fnet = m×a
Fapplied - friction = m×a
1172 - 962 = 200 × a
210 = 200a
a = 1.05
Because of wave refraction, erosion along an irregular coastline is:
Because of wave refraction, erosion along an irregular coastline is greatest in headlands.
What is Refraction?This is referred to as the bending of light as it passes from one medium to another with its speed being changed.
Refraction causes erosion along an irregular coastline to be greatest in headlands which is the area of land projected out toward the sea.
Read more about Refraction here https://brainly.com/question/1360744
#SPJ12
how does radiation differ from conduction and convection for the transference of heat
?
Answer:
look below! :)
Explanation:
Radiation transfers heat through electromagnetic waves
conduction transfers heat through direct contact of things
convection transfers heat through movement of air or water
What is the main difference between a longitudinal wave and a transverse wave? a longitudinal wave always travels faster than a transverse wave. a longitudinal wave does not need a medium to travel through. a transverse wave is made of particles that move perpendicular to the motion of the wave. a transverse wave always carries more energy so that it can travel through empty space.
In a longitudinal wave, the propagation of energy is in the direction of the motion, while in a transverse wave the propagation of energy is perpendicular to the direction of motion.
What is longitudinal wave and Transverse wave?Longitudinal wave is a wave which moves in the direction from where it was started. It has a compression (increased intensity) of the medium particles and a rarefaction ( reduced intensity).
Transverse wave is wave that travels perpendicular or at right angles to the direction from where it was started.
The main differences between longitudinal wave and Transverse wave are:
Transverse wave, the medium moves vertically up and down while in the longitudinal wave, the medium moves left to right.Transverse wave has a crest and a trough while the longitudinal waves have a compression and rarefaction.Transverse waves don't have a pressure variation , longitudinal waves have a pressure variation.Transverse waves can only be propagated in solids and on the surfaces of liquids, Longitudinal waves can be propagated in solids, liquids and gases.Transverse waves don't change in density throughout the medium, longitudinal waves have a change in density throughout the medium.Therefore,
The propagation of energy is in the direction of the motion, while in a transverse wave the propagation of energy is perpendicular to the direction of motion.
Learn more about longitudinal wave and Transverse wave here:
https://brainly.com/question/3513157
#SPJ1