The value of impedance Z of the circuit, when the rate at which electrical energy is dissipated in the resistor is 316 w, is 508 ohms.
What is impedance Z of the circuit?The impedance Z of the circuit is the ratio of voltage amplitude to the maximum current.
[tex]Z=\dfrac{V}{I}[/tex]
Here, V is voltage amplitude and I maximum current.
A resistor with R = 300 Ω and an inductor are connected in series across an ac source that has voltage amplitude 490V. The rate at which electrical energy is dissipated in the resistor is 316 W.
The rate at which electrical energy is dissipated in the resistor is the product of the resistance and the square of current. Thus,
[tex]316=340\times I^2\\I=\sqrt{\dfrac{316}{340}}\\I=0.964\rm\; A[/tex]
The impedance Z of the circuit is,
[tex]Z=\dfrac{V}{I}\\Z=\dfrac{490}{0.964}\\Z=508\rm\; ohm[/tex]
Thus, the value of impedance Z of the circuit, when the rate at which electrical energy is dissipated in the resistor is 316 w, is 508 ohms.
Learn more about the impedance Z of the circuit here:
https://brainly.com/question/24225360
#SPJ4
Hello please answer this I need it right now
Nonsense:report
Right answer:brainliest
Answer:
do you have an answer key
Explanation:
What needs to be done to balance this equation?
Question 4 options:
Do nothing (equation is balanced).
Change O 2 to O 4 on the left side of the equation.
Add coefficient 2 to O 2 on the left side of the equation.
Remove coefficient 2 in front of H 2O on the right side of the equation.
Answer:
Add the coefficient 2 to O2 on the left side of the equation. (O2 represents a molecule of oxygen gas)
The equation shows an equal number of H atoms and C atoms on either side, but the number of O atoms must also balance.
Which type of radiation occur during nuclear processes? (Select all that apply)
A. Gravitational radiation
B. Acoustic radiation
C. Electromagnetic radiation
D. Particle radiation
*don’t answer if you don’t know*
Answer:
Particle radiation
Explanation:
nuclear process is in atom nucleas maybe emit the electron ,neutrino or anti-neutrino
A flat, square surface with side length 4.35 cm is in the xy-plane at z=0.
Calculate the magnitude of the flux through this surface produced by a magnetic field
B⃗ = (0.200T)i^ + (0.250T)j^ + (0.550T)k^ .
The textbook isn't being helpful, I'll appreciate a good explanation!
Answer:
I X j = k (perpendicular to plane)
j X k = 0
i X k = 0 cross products for vectors i, j, k
Flux = B dot A and only B in the k direction is relevant
Flux = .550 T * .0435^2 m^2 = .00104 Webers-m^2
The magnitude of the flux through the given surface produced by the magnetic field B is 10.73 T cm².
What is magnetic flux?Magnetic flux is a measure of the amount of magnetic field passing through a given surface. It is defined as the product of the magnetic field B and the area A that it passes through, multiplied by the cosine of the angle between the magnetic field and the surface normal:
Φ = B ⋅ A ⋅ cos(θ)
Where Φ = is the magnetic flux,
B = is the magnetic field,
A = is the area of the surface,
θ = is the angle between the magnetic field and the surface normal.
In other words, magnetic flux is a measure of how much magnetic field passes through a surface, taking into account both the strength of the magnetic field and the orientation of the surface with respect to the field.
Magnetic flux is an important concept in electromagnetism and is used to describe the behavior of magnetic fields in a variety of applications, including generators, motors, and transformers. It is also used in the study of magnetism in materials, such as ferromagnetic materials, where the flux density is an important property.
Here in the question,
To calculate the flux through the given surface produced by the magnetic field B, we can use the formula:
Φ = ∫∫ B · dA
Where Φ = is the magnetic flux,
B = is the magnetic field,
dA = is an infinitesimal area vector pointing outward from the surface.
Since the surface is a flat square in the xy-plane, its normal vector is the unit vector k^. Therefore, the outward-pointing area vector dA can be expressed as:
dA = dx dy k^
Where dx and dy = are infinitesimal elements of length in the x and y directions, respectively.
Integrating over the surface, we have:
Φ = ∫∫ B · dA
= ∫∫ (0.200T i^ + 0.250T j^ + 0.550T k^) · (dx dy k^)
= ∫∫ 0.550T dx dy
= 0.550T ∫∫ dx dy
= 0.550T (4.35 cm)²
Φ = 10.73 T cm²
Therefore, the magnitude of the flux through the given surface produced by the magnetic field B is 10.73 T cm².
To learn more about magnetic flux click:
https://brainly.com/question/30858765
#SPJ2
How long would the measured lifetime be if the neutron were moving at 0. 936c?
The lifetime of the neutron will be t=40 minutes when the neutron is moving at a speed of 936 c.
What will be life of neutron?when neutrons are free and floating alone outside of an atom, they start to decay into protons and other particles.The formula for the life of the neutron will be given by:
[tex]t=\dfrac{\Delta t_o}{\sqrt{1-\dfrac{v^2}{c^2}}}[/tex]
Here
t= Lifetime
to=Average life
v= velocity
c=speed of light
Since the average life of the neutron is about 14 minutes or 840 seconds.
Velocity =0.936c
By putting the values in the question
[tex]t=\dfrac{840}{\sqrt{1-\dfrac{(0.936c)^2}{c^2}}}[/tex]
[tex]t=\dfrac{840}{\sqrt{0.123}}[/tex]
[tex]t=\dfrac{840}{0.35}=2400\ \ sec\\\\[/tex]
Hence the lifetime of the neutron will be t=40 minutes when the neutron is moving at a speed of 936 c.
To know more about neutron follow
https://brainly.com/question/26952570
#SPJ4
What breathe in oxygen (O2) and breathe out Carbon dioxide (CO2)??
Answer:
The answer is Human beings
Answer:
Respiration
Explanation:
because the role of the respiratory system is to inhale oxygen and exhale carbon dioxide were by the cells of the body use oxygen to perform certain functions that keeps us alive and the waste products created by our body cells after they've performed these functions is regarded as carbon dioxide.
Which of the following statements is correct?
Question 5 options:
Lithium is a metal, Titanium is a nonmetal
Magnesium and Helium are gases.
Copper and Argon conduct electricity,
Calcium is malleable, Sulfur is not malleable.
Option A
Lithium present in group 1 so it's a alkali metal Titanium is outside d block elements hence it's a non metal .Answer:
d) Calcium is malleable, Sulfur is not malleable.
Explanation:
Calcium is a metal and shows property of malleability. Sulfur is a non metal and it does not shows property of malleability. Hence, option (d) is the correct answer.
Jonathan and Cody’s older brother Josh, who is pictured in the Figure below, is standing at the top of a half-pipe at Newton’s Skate Park. Gravity is exerting a downward force on the skateboard as seen in the picture. Why doesn’t it tip over the edge and start rolling down the side of the half-pipe?
In order to begin moving a Mass (Accelaration) will solve for the force required to move the skateboard. Mass(9.8) will give you the force needed to move the skateboard originally
What is acceleration ?Acceleration can be defined as the rate of change of velocity with respect to time, is a vector quantity associated with both magnitude and direction.
Acceleration can be up two types such as Uniform and Non-uniform acceleration, in a circle where speed remains constant but the direction is changing followed by velocity changes, and the body is said to be accelerated.
The average acceleration can be defined as the total change in velocity in the given interval period of time means the total time taken for the change. For a given interval of time, it is represented as ā.
Instantaneous acceleration can be defined as the ratio of change in velocity in a given time interval such that the time interval goes to zero.
For more details acceleration, visit
brainly.com/question/107797
#SPJ2
The kinetic energy, k, of an object varies jointly with the mass of the object and the square of the velocity of the object. a 50-kg object moving at a velocity of 20 meters per second has 10,000 joules of kinetic energy. how many joules of kinetic energy does a 25-kg object moving at a velocity of 10 meters per second have? 250 joules 1,250 joules 2,500 joules 3,125 joules
Answer:
KE = 1/2 M V^2 = 1/2 * 25 * 10^2 = 1250 J
Check
M2 = 1/2 M1
V2 = V1 / 2
E2 = 1/2 * 1/4 E1 = E1 / 8 = 10000 / 8 = 1250 J
Answer:
B. 1,250 joules
Explanation:
Mike understands the formula for temperature conversion, but is having difficulty imagining what various temperatures feel like. which of these would be a good example to tell mike what 37°c feels like? a. room temperature b. a hot pan c. body temperature d. a chilly autumn evening
A good example that will help to to tell mike what 37°c feels like is body temperature.
What is room temprrature?The average room temperature is typically around 20°C, or 68 degrees Fahrenheit.
What is body temperature?The average body temperature is 98.6 Fahrenheit or 37 degrees Celsius.
Thus, a good example that will help to to tell mike what 37°c feels like is body temperature.
Learn more about body temperature here: https://brainly.com/question/5295345
#SPJ4
Sulfur dioxide, SO2, is a chemical preservative and antioxidant put in food and beverages in the US. It is stored in cool, dry warehouses in 5-liter containers, which hold a mass of 14.6 kg of SO2 gas. On Friday, May 27, ErCOT experiences a brown-out and the warehouse loses power, which causes it to heat up. If the warehouse is typically kept at 20°C and it heats up to 85°C, how much thermal energy does one container of sulfur dioxide absorb, in kilojoules? [The specific heat capacity of sulfur dioxide at 20°C is 1.37 J/g°C.]
Q=mcΔt
Q=14.6 x 10³ x 1.37 x (85-20)
Q=1.3 x 10⁶ J = 1.3 x 10³ kJ
A bullet of mass 50 g is fired from below into a suspended object of mass 450 g. The object rises through a height of 1.8 m with bullet remaining inside the object. Find the speed of the bullet. Take g = 10 ms².
Hello!
We can begin by using the Work-Energy theorem. The initial energy is the kinetic energy of the combined mass of the bullet and suspended object, while the final energy is the GPE of the combined objects.
In equations:
[tex]E_i = \frac{1}{2}mv^2\\\\E_f = mgh[/tex]
m = combined mass of the bullet and suspended object (0.5 kg)
v = velocity of block system after struck (? m/s)
g = acceleration due to gravity (10 m/s²)
h = final height of combined objects (1.8 m)
Set the two equal (Conservation of Energy) and solve for velocity.[tex]\frac{1}{2}mv^2 = mgh \\\\\frac{1}{2}v^2 = gh \\\\v^2 = 2gh \\\\v = \sqrt{2gh}\\\\v = \sqrt{2(10)(1.8)} = 6 \frac{m}{s}[/tex]
Now, we can use the conservation of linear momentum to solve.
Recall that:
[tex]p_i = p_f[/tex]
For an inelastic collision (objects stick together):
[tex]m_1v_1 + m_2v_2 = (m_1 + m_2) v_f[/tex]
Let m1 represent the bullet and m2 represent the suspended object.
Initially, the suspended object has no velocity, so v2 = 0. Therefore:
[tex]m_1v_1 = (m_1 + m_2)v_f\\\\v_1 = \frac{(m_1 +m_2)v_f}{m_1}\\\\v_1 = \frac{(0.5)(6)}{0.05} = \boxed{60 \frac{m}{s}}[/tex]
Which legal measure allowed whites in southern states to keep blacks from voting after reconstruction ended?.
Jim Crow laws was the legal measure which allowed whites in southern states to keep blacks from voting after reconstruction ended.
What was JIm Crow law?These were the state and local laws which enforced racial segregation in the Southern part of the United States.
Due to this laws, whites in southern states kept blacks from voting after reconstruction ended.
Read more about JIm Crow law here https://brainly.com/question/24845174
#SPJ1
3. A shuffleboard player applies a horizontal force of 10.0 N to the shuffleboard puck (400 g). If the puck accelerates at 24.5 m/s/s as the player continues to push it, what is the frictional force on the puck?
Answer:
Friction = 2 N
Explanation:
F = ma
= .4 * 24.5 = 9.8 N net force 10 N by stick means Ffriction = 2 N
The frictional force acting on the shuffleboard puck is 6.08 N.
What is meant by frictional force ?Frictional force is defined as the resistive force that prevents the relative motion between two surfaces that are in contact with each other.
Here,
Horizontal force applied on the shuffleboard puck, F = 10 N
Mass of the shuffleboard puck, m = 400 g = 0.4 kg
Acceleration of the shuffleboard puck, a = 24.5 m/s²
According to Newton's third law,
F - f = ma
where f is the frictional force acting on the shuffleboard puck.
So, the frictional force,
f = F - ma
f = 10 - (0.4 x 9.8)
f = 10 - 3.92
f = 6.08 N
Hence,
The frictional force acting on the shuffleboard puck is 6.08 N.
To learn more about frictional force, click:
https://brainly.com/question/1714663
#SPJ3
Can someone please answer this, ill give you brainliest Would be very appreciated.
Answer:
Fuel switching
Explanation:
Adaptation
It denotes to be changed according to the change happening in surroundingsIt also denotes not to run away from danger rather than adapting to live with the fear.We know fuel will be finished one day so we are shifting to new fuel sources.
I need severe help
a cat ran west for 30 meters and it took them 5 seconds, what was the average speed of the cat? Don’t forget units!
In one or two sentences, explain design modifications which were implemented after the tacoma bridge disaster
The modifications that are implemented after Tacoma bridge disaster are added trusses and openings below road decks to decrease oscillations.
Why Tacoma Bridge disaster occurred?While marching, the natural frequency of the vibrations of marching soldiers matched up with the resonant frequency of the bridge. This resulted in the collapsing of the bridge in seconds.
Because of the disaster of the Tacoma Narrows Bridge, the bridge was strengthened by adding trusses as well as openings below road decks so as to decrease vibrations caused by running vehicles on the bridge.
Thus, the modifications that are implemented after Tacoma bridge disaster are added trusses and openings below road decks to decrease oscillations
Learn more about Tacoma Bridge disaster.
https://brainly.com/question/17924109
#SPJ1
if a body is moving with constant linear positive acceleration
a) It moves with constant velocity
b) It remains at rest.
c) It decreases its velocity at constant rate.
d) It increases its velocity.
Answer:
D
Explanation:
It says constant positive linear acceleration, which means that the velocity increases at a constant rate.
What is the initial velocity of the object represented by
the graph?
m/s
Velocity vs Time
1
2.
3
4
ch
5
Time (s)
Answer:
at t=0 , V = 5 so it's 5 m/s
Explanation:
it is 5. 5 is the answer.
If 4. 0 j of work are performed in stretching an ideal spring with a spring constant (force constant) of 2500 n/m, by what distance is the spring stretched?
The distance by which the spring is stretched when 4. 0 j of work are performed in stretching it with a spring constant (force constant) of 2500 n/m is 5.7 cm.
How to calculate the work done required stretching the spring?Work done of spring is the product of average force and the displacement. It can be given as,
[tex]W=\dfrac{1}{2}kx^2[/tex]
Here, k is the spring constant and x is the displacement.
The 4. 0 j of work are performed in stretching an ideal spring with a spring constant (force constant) of 2500 n/m. Thus,
[tex]W=4\text{ J}\\k=25000\text{ N/m}\\[/tex]
Put the values in the formula.
[tex]4=\dfrac{1}{2}(2500)(x)^2\\x^2=\dfrac{4\times2}{2500}\\x=\sqrt{0.0032}\\x=0.057 \text{m}\\x=5.7 \text{cm}[/tex]
Thus, the distance by which the spring is stretched when 4. 0 j of work are performed in stretching it with a spring constant (force constant) of 2500 n/m is 5.7 cm.
Learn more about the work done of spring here;
https://brainly.com/question/3317535
#SPJ4
PLS HELP ME Which object has the greatest kinetic energy?
A: a truck with a mass of 3,500 kg moving at 30 m/s
B: a person with a mass of 73 kg running 6 m/s
C: a locomotive engine with a mass of 205,000 kg moving 5 m/s
D: a fast pitched baseball with a mass of .5 kg moving at 46.9 m/s
A locomotive engine with a mad of 205000kg moving with 5m/s
Explanation:
[tex]from \: the \: options \: substitute \: the \: formulars \: for \: kinetic \: energy \\ for \: opton \: a \: ke = \frac{1}{2} mv {}^{2} = \frac{1}{2} \times 3500 \times 30 {}^{2} = 1575000 \\ for \: option \: b \: ke = \frac{1}{2} mv {}^{2} = \frac{1}{2} \times 73 \times 6 {}^{2} = 1314 \\ for \: option \: \: c = \frac{1}{2}mv {}^{2} = \frac{1}{2} \times 205000 \times 5 {}^{2} = 2562500 \\ for \: option \: d \: = \frac{1}{2}mv {}^{2} = \frac{1}{2} \times 0.5 \times(46.9) {}^{2} = 549.9025 \\ from \: the \: analysis \: above \: the \: options \: that \: has \: the \: highest \: kinetic \: energy \: is \: a \: locomotive \: engine \: with \: a \: mass \: of \: 205000kg \: moving \: with \: a \: velocity \: of \: 5 \frac{m}{s} [/tex]
Describe how our knowledge of science changes over time
Answer:
Explanation:
Science has come a long way in the last 150 years. We now have more powerful data analysis techniques, more sophisticated equipment for making observations and running experiments, and a much greater breadth and depth of scientific knowledge.
Homes with multiple bathrooms have outlets connected in series with a red reset button in the system
Homes with multiple bathrooms have outlets connected in series with a red reset button in the system. The reason for this circuit design is to prevent electrocution.
What is red reset button?The water heater's reset switch provided on the upper thermostat of an electric water heater. If the button is on, the switch would have tripped and the reset is required.
To prevent any kind of injury or killing of a person by electric shock is called as the electrocution. This can be prevented only by outlets connected in series with a red reset button.
Thus, the reason for this circuit design is to prevent electrocution.
Learn more about red reset button.
https://brainly.com/question/7643711
#SPJ1
The strength of the force of friction depends on which two factors?
O A. The objects' sizes and weights
O B. How hard the surfaces push together and the size of the object
C. How hard the surfaces push together and the types of surfaces
involved
о
D. The heat generated by the friction and the types of surfaces
involved
Options A and D are correct. The strength of the force of friction depends on the objects' sizes and weights and the heat generated by the friction and the types of surfaces involved.
What is the friction force?It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. its unit is Newton (N).
Mathematically, it is defined as the product of the coefficient of friction and normal reaction.
On resolving the given force and acceleration in the different components and balancing the equation gets. Components in the x-direction.
The strength of the force of friction depends on the two factors, as;
A. The objects' sizes and weights.
D. The heat generated by the friction and the types of surfaces involved.
Hence, options A and D are correct.
To learn more about the friction force, refer to the link;
https://brainly.com/question/1714663
#SPJ1
Which equation is valid in the x axis for any projectile?
Answer:
Vx = u*cos θ
Explanation:
where ,
θ = angle of projection with X - axis(horizontal)
u = initial velocity of projectile
Vx = velocity of projectile with respect to x-axis
If Weight=mg and Force=ma, and the only force acting on an object is gravity, then the masses cancel each other out and you are left with g=a. Therefore, that must mean everything on earth must fall at the same rate. Is this true Why or why not?
The correct answer to question:
Explanation:
When g=a, that means everything on earth fall at the same rate.
Why does everything fall to the earth at the same rate?As such, all objects free fall at the same rate regardless of their mass. Because the 9.8 N/kg gravitational field at Earth's surface causes a 9.8 m/s/s acceleration of any object placed there, we often call this ratio the acceleration of gravity.
Why is gravity equal to acceleration?When objects fall to the ground, gravity causes them to accelerate. Acceleration is a change in velocity, and velocity, in turn, is a measure of the speed and direction of motion. Gravity causes an object to fall toward the ground at a faster and faster velocity the longer the object falls.
Know more about gravity here
https://brainly.com/question/4014727
#SPJ2
How long does it take jupiter to rotate on its axis.
Answer:
10 hours
Explanation:
1. Answer the following questions. a. Which one of the following is not a pure substance? i. Air ii. Sugar iii. Salt iv. Gold
Answer:
A.
Explanation:
The awnser is A because air is made of a combination of compounds making it not a pure substance. The rest are pure substances.
A ringing bell is located in a chamber. when the air is removed from the chamber, why can the bell be seen vibrating but not be heard?
Answer:
sound requires a medium to be propagated
Explanation:
sound is a mechanical wave and thus requires a medium to be propagated. Air this case is a medium of travel for the ringing bell in the chamber that is why sound can be heard. When air in the chamber it becomes a vacuum that is why sound is not heard
Click on the ray diagram that shows the proper positioning of an image formed by a concave lens.
I don't think so
Answer:
h
Explanation:
beautiful answer