A rectangle has a width of 2x - 3 and a length of 3x + 1. a) Write its area as a simplified polynomial. b) Write expressions for the dimensions if the width is doubled and the length is increased by 2. c) Write the new area as a simplified polynomial.

The probability that the marathon runners finish in less than 150 minutes is approximately 0.1587.

The given distribution is a normal distribution with a mean of 180 minutes and a standard deviation of 30 minutes.

Let x be a random variable representing the finishing times of a marathon.

Thus, x ~ N (180, 30²).

To find the probability that the marathon runners finish in less than 150 minutes, we need to find P(x < 150).

Here's how we can find it:

z = (x - μ) / σ,

where μ = 180,

σ = 30.z

= (150 - 180) / 30

= -1.p(z < -1)

= 0.1587, using a standard normal distribution table.

Thus,P(x < 150) = P(z < -1) = 0.1587 (approx).

Therefore, the probability that the marathon runners finish in less than 150 minutes is approximately 0.1587.

Know more about probability  here:

https://brainly.com/question/251701

#SPJ11

The approximate value of log base b (45 × 3) is 1.670.

To approximate the value of log base b of 45 times 3, we can use the logarithmic properties to rewrite the expression as the sum of two logarithms:

log base b (45 × 3) = log base b 45 + log base b 3

Now, using the given approximations for log base b of 20.327, log base b of 3, and log base b of 5:

log base b 45 ≈ log base b 20.327 + log base b 5

≈ 0.503 + 0.835

≈ 1.338

log base b 3 ≈ log base b 5 - log base b 2

≈ 0.835 - 0.503

≈ 0.332

Finally, we can substitute these values back into the original expression:

log base b (45 × 3) ≈ 1.338 + 0.332

≈ 1.670

Therefore, the approximate value of log base b (45 × 3) is 1.670.

To know more about logarithm , visit:

https://brainly.com/question/29504234

#SPJ11

The coefficient of determination is 0.05.Answer: a. Mean square error = 0.25. b. Coefficient of determination (R²) = 0.05.

a. Mean square error is used to measure the goodness of fit of the linear regression model. Mean square error (MSE) is the average squared differences between the predicted value and the actual value. MSE can be calculated using the formula MSE = SSE / (n - k - 1) where SSE is the sum of squared errors, n is the number of observations and k is the number of independent variables.

The given data for two variables x and y are as follows: xi 2yi7Applying the values in the regression equation, we get:ŷ = 1.2 + 2.4x Substituting xi = 2, we get: ŷ = 1.2 + 2.4(2) = 6Therefore, the SSE can be calculated as follows: SSE = ∑(yi - ŷ)² = (7 - 6)² = 1Now, n = 5 and k = 1 (since there is only one independent variable),

Therefore, MSE = SSE / (n - k - 1)= 1 / (5 - 1 - 1)= 0.25Therefore, the mean square error is 0.25.b. The coefficient of determination (R²) is the proportion of the total variation in the dependent variable (y) that can be explained by the variation in the independent variable(s) (x).

It ranges from 0 to 1, where 0 means that the independent variable(s) does not explain any of the variation in the dependent variable, and 1 means that the independent variable(s) perfectly explain the variation in the dependent variable.R² is calculated as the ratio of the explained variation to the total variation.

It can be calculated as follows: R² = SSE / SST, where SSE is the sum of squared errors and SST is the total sum of squares. SST is calculated as follows: SST = ∑(y i - ȳ)²where ȳ is the mean of yi

Substituting the given values, we get: SST = ∑(yi - ȳ)²= (7 - 5)² + (7 - 5)² + (7 - 5)² + (7 - 5)² + (7 - 5)²= 2² + 2² + 2² + 2² + 2²= 20Now, SSE = 1 (calculated in part a)Therefore,R² = SSE / SST= 1 / 20= 0.05

Therefore, the coefficient of determination is 0.05.Answer: a. Mean square error = 0.25. b. Coefficient of determination (R²) = 0.05.

To know more about Mean visit :

https://brainly.com/question/31101410

#SPJ11

The first partial derivatives of z with respect to x and y in the equation x + sin(y + z) = 0 are ∂z/∂x = -1 and ∂z/∂y = -cos(y + z).

To find the first partial derivatives of z with respect to x and y, we need to differentiate the given implicit equation with respect to x and y while treating z as a function of x and y.

Differentiating the equation with respect to x:

∂/∂x (x + sin(y + z)) = 1 + ∂z/∂x

Differentiating the equation with respect to y:

∂/∂y (x + sin(y + z)) = cos(y + z) (1 + ∂z/∂y)

The term ∂z/∂x represents the partial derivative of z with respect to x, and ∂z/∂y represents the partial derivative of z with respect to y.

So, the first partial derivatives of z are:

∂z/∂x = -1

∂z/∂y = -cos(y + z)

These derivatives indicate how the variable z changes with respect to changes in x and y in the given equation x + sin(y + z) = 0. The value of -1 for ∂z/∂x means that for every unit increase in x, z decreases by 1. The value of -cos(y + z) for ∂z/∂y indicates how z changes with respect to changes in y, with the specific relationship determined by the trigonometric function cos(y + z).

Learn more about partial derivatives here:

https://brainly.com/question/32554860

#SPJ11

According to the Central Limit Theorem, the distribution of the sample means will be approximately normal.

In particular, if we take random samples of size n from a distribution with mean μ and variance σ², then as the sample size n increases, the distribution of the sample means approaches a normal distribution with mean μ and variance σ²/n.What is the CLT?The central limit theorem (CLT) describes the behavior of the sample means from any population (not necessarily normal) as the sample size increases.

When the sample size is large enough, the distribution of the sample means is approximately normal, regardless of the shape of the original population distribution.I n summary, according to the Central Limit Theorem, the distribution of the sample means from a random sample of size 25 drawn from a distribution with mean 5 and variance 16 is approximately normal with a mean of 5 and a variance of 16/25.

To know more about Central Limit Theorem visit:

https://brainly.com/question/898534

#SPJ11

The value of k that makes the vectors à and b⁻ orthogonal is k = 10/3. For two vectors to be orthogonal, their dot product must be zero.

We need to find the value of k such that the dot product of the vectors à and b⁻ will be zero. The dot product of two vectors à = [a1, a2] and b⁻ = [b1, b2] is given by: à · b⁻ = a1b1 + a2b2

Given that à = [5, -3] and b⁻ = [2, k], their dot product is: à · b⁻ = (5)(2) + (-3)(k) = 10 - 3k

For à and b⁻ to be orthogonal, their dot product must be zero. Thus, we need to solve the equation: 10 - 3k = 0

Solving for k, we get: k = 10 / 3

Therefore, the value of k that makes the vectors à and b⁻ orthogonal is k = 10/3.

know more about orthogonal vectors here: brainly.com/question/28503609

#SPJ11

The complex power is 1920 ∠ (-45°) VA, the average power is approximately 1357.1 W, and the reactive power is approximately -1357.1 VAR.

To find the complex power, average power, and reactive power, we need to calculate the complex power S, which is the product of the voltage and current phasors.

Given:

v(t) = 160 cos(377t) V

i(t) = 12 cos(377t + 45) A

The complex power is given by:

S = V * I*

where V is the phasor representing the voltage and I* is the complex conjugate of the phasor representing the current.

In phasor form:

V = 160 ∠ 0° V

I = 12 ∠ 45° A

Taking the complex conjugate of I:

I* = 12 ∠ (-45°) A

Now, we can calculate the complex power:

S = V * I*

S = (160 ∠ 0° V) * (12 ∠ (-45°) A)

Multiplying the magnitudes and adding the angles:

S = (160 * 12) ∠ (0° - 45°) VA

S = 1920 ∠ (-45°) VA

Therefore, the complex power is 1920 ∠ (-45°) VA.

To find the average power, we take the real part of the complex power:

Average Power = Re(S) = Re(1920 ∠ (-45°) VA)

Average Power = 1920 * cos(-45°) W

Average Power ≈ 1357.1 W

The reactive power can be found by taking the imaginary part of the complex power:

Reactive Power = Im(S) = Im(1920 ∠ (-45°) VA)

Reactive Power = 1920 * sin(-45°) VAR

Reactive Power ≈ -1357.1 VAR (Note: The reactive power is negative in this case.)

Know more about average power here:

https://brainly.com/question/31040796

#SPJ11

The integral of the two terms as shown below:[tex]∫(1 - x²)^(1/2)dx = 1/2(θ + 1/2sin(2θ)[/tex] + C)where C is the constant of integration.

To integrate (1-x²)^(1/2) using substitution method, we use the following steps:

Step 1: We let x

= sin(θ)dx = cos(θ)dθ1-x²

= cos²(θ)

Step 2: We substitute the expression derived from Step 1 into the original function to obtain∫(1 - x²)^(1/2)dx=∫cos²(θ)dθ

Step 3: We then apply the double angle formula to obtain:cos²(θ) = (1 + cos(2θ))/2Step 4: We substitute this expression back into the integral to obtain:

∫(1 - x²)^(1/2)dx = ∫(1 + cos(2θ))/2dθ∫(1 - x²)^(1/2)dx

= 1/2 ∫(1 + cos(2θ))dθ

Step 5: Evaluate the integral of the two terms as shown below:∫(1 - x²)^(1/2)dx = 1/2(θ + 1/2sin(2θ) + C)where C is the constant of integration.

Finally, we substitute x = sin(θ) back into the expression above to obtain the final solution.

To know more about integral visit:-

https://brainly.com/question/31433890

#SPJ11

1. The probability that the 4th surviving patients is the 6th patient is 0.9. ; 2.  The probability that the 1st surviving patient is the 4th patient is 0.9 * 0.9 * 0.9 * 0.1 ; 3.   The probability of taking 2 out of 4 selected patients 0.33, ; 4. The probability that the clinic will have 4 patients 0.168.

1. The probability that the 4th surviving patients is the 6th patient is 0.9, as the probability of a patient recovering from the delicate heart operation is given as 0.9.

2. The probability that the 1st surviving patient is the 4th patient is 0.9 * 0.9 * 0.9 * 0.1, since the patient should recover for the first three times and fail to recover on the fourth attempt, which has a probability of 0.1.

3. The probability of taking 2 out of 4 selected patients that have heart disease when there are 5 patients with the disease is given by:

C(5,2) * C(10,2) / C(15,4) = (10 * 45) / 1365 = 0.33, where C stands for combinations.

4. The probability that the clinic will have 4 patients in the next hour is given by:

P(X = 4) = (e^-3 * 3^4) / 4! = 0.168, where e is the mathematical constant e and the Poisson distribution formula is used to calculate the probability that an event will occur a certain number of times during a specified time period.

Know more about the Poisson distribution

https://brainly.com/question/30388228

#SPJ11

A continuous random variable is a variable that can take on any value within a certain range. A continuous random variable is defined as a random variable whose value is a real number. It has a range of possible values. Since the variables can take on a continuum of possible values, they cannot be counted.

Continuous random variables are numerical variables that may take on any value between two points. An example of a continuous random variable is the time it takes for a leaf to fall from a tree. The time it takes for a leaf to fall can take on any value between zero and infinity. The probability distribution of a continuous random variable is described using a probability density function (pdf).Continuous random variables are typically measured using an infinite number of decimal points. This is in contrast to discrete random variables, which are typically measured using whole numbers. Since continuous random variables can take on an infinite number of values, the probability of any one value occurring is typically zero. Instead, we describe the probability distribution using a probability density function (pdf).

Continuous random variables are numerical variables that may take on any value between two points. An example of a continuous random variable is the time it takes for a leaf to fall from a tree. The time it takes for a leaf to fall can take on any value between zero and infinity. The probability distribution of a continuous random variable is described using a probability density function (pdf).A probability density function is a mathematical function that describes the likelihood of a continuous random variable falling within a particular range of values. The pdf is often represented graphically as a curve. The total area under the curve is equal to one. The probability of a continuous random variable falling within a particular range of values is equal to the area under the curve that corresponds to that range of values.The expected value of a continuous random variable is calculated using an integral. The integral is the sum of the product of each possible value of the random variable and its probability density. The variance of a continuous random variable is calculated using a similar formula, but the sum is squared.This is in contrast to discrete random variables, which are typically measured using whole numbers. Since continuous random variables can take on an infinite number of values, the probability of any one value occurring is typically zero. Instead, we describe the probability distribution using a probability density function (pdf).

To know more about random variable visit :-

https://brainly.com/question/30789758

#SPJ11

The three main assumptions of the residuals in a linear statistical model are constant variance, independence, and normality i.e., the correct option is A.

In a linear statistical model, the residuals represent the differences between the observed values and the predicted values. The assumptions regarding the residuals play a crucial role in the validity of the model and the interpretation of its results.

The first assumption is constant variance, also known as homoscedasticity.

It states that the variability of the residuals should be consistent across all levels of the predictor variables.

In other words, the spread of the residuals should not systematically change as the values of the predictors change.

The second assumption is independence. It assumes that the residuals are not correlated with each other, meaning that the error term for one observation should not be influenced by the error term of another observation.

Independence ensures that each observation contributes unique information to the model.

The third assumption is normality. It states that the residuals follow a normal distribution.

Normality assumption allows for the use of inferential statistics, such as hypothesis testing and confidence intervals, which rely on the assumption of normality.

These three assumptions are important for the accuracy and reliability of the model's estimates and inferences.

Violations of these assumptions can lead to biased estimates, inefficient inference, and incorrect conclusions.

Therefore, it is crucial to assess the residuals for constant variance, independence, and normality to ensure the validity of the linear statistical model.

Learn more about variance here:

https://brainly.com/question/16032058

#SPJ11

Answer:

C. 39/48 = 81%

Step-by-step explanation:

To determine the percentage of females who only said they like cats using the given two-way table, we need to find the number of females who selected "cats" only and divide it by the total number of females surveyed. We can then multiply the result by 100 to get the percentage.

According to the provided two-way table:

Number of females who only said they like cats = 39

Total number of females surveyed = 48

To calculate the percentage:

Percentage of females who only said they like cats = (Number of females who only like cats / Total number of females surveyed) * 100

Percentage of females who only said they like cats = (39 / 48) * 100 ≈ 81.25%

Therefore, the correct option is:

C. 39/48 = 81%

a) The percentage of steers weighing over 1150 pounds is 31.46%

b) The percentage of steers weighing under 900 pounds is  1.43%

c) The percentage of steers weighing between 1200 and 1250 pounds is 5.82%.

The given problem is about the normal distribution of the weights of steers, with mean µ = 1104 pounds and standard deviation σ = 94 pounds.

This problem is solvable using the normal distribution table and the z-score formula. The z-score of a random variable x is given by:z = (x - µ) / σ where x is the observed value of the variable.

The z-score measures the number of standard deviations away from the mean that a value is located. Let's solve the problem part by part:

a) To find the percentage of steers weighing over 1150 pounds, we need to calculate the area under the normal distribution curve to the right of 1150.

The z-score for this value is given by:z = (x - µ) / σ = (1150 - 1104) / 94 = 0.489

The area to the right of this z-score can be found from the normal distribution table.Using the table, we find that the area to the right of z = 0.49 is 0.3146.

So, the percentage of steers weighing over 1150 pounds is:P(x > 1150) = 31.46%

b) To find the percentage of steers weighing under 900 pounds, we need to calculate the area under the normal distribution curve to the left of 900.

The z-score for this value is given by:z = (x - µ) / σ = (900 - 1104) / 94 = -2.170

The area to the left of this z-score can be found from the normal distribution table.

Using the table, we find that the area to the left of z = -2.17 is 0.0143.

So, the percentage of steers weighing under 900 pounds is:P(x < 900) = 1.43%

c) To find the percentage of steers weighing between 1200 and 1250 pounds, we need to calculate the area under the normal distribution curve between these two values.

We need to find the z-scores for these values first.

z1 = (x1 - µ) / σ = (1200 - 1104) / 94 = 1.02z2 = (x2 - µ) / σ = (1250 - 1104) / 94 = 1.54

The area between these z-scores can be found from the normal distribution table.

Using the table, we find that the area between z = 1.02 and z = 1.54 is 0.0582.

So, the percentage of steers weighing between 1200 and 1250 pounds is:P(1200 < x < 1250) = 5.82%

Know more about the normal distribution

https://brainly.com/question/23418254

#SPJ11

True mean systolic blood pressure for women aged 18-24 falls within the range of 111.3545 to 118.4545 mmHg. The margin of error (ME) of approximately 3.5455 indicates the maximum amount of error we expect in estimating the true population mean based on our sample.

To find the 99% confidence interval (CI) and margin of error (ME) for systolic blood pressures for women aged 18-24, we can use the following information:

Sample size (n): 92

Sample mean (X): 114.9

Sample standard deviation (σ): 13.2

First, let's calculate the standard error (SE) of the mean:

SE = σ / √n

SE = 13.2 / √92 ≈ 1.3762 (rounded to 4 decimal places)

Next, we can calculate the margin of error (ME) using the formula:

ME = z * SE

For a 99% confidence level, the corresponding z-value can be found using a standard normal distribution table or a calculator. The z-value for a 99% confidence level is approximately 2.576.

ME = 2.576 * 1.3762 ≈ 3.5455 (rounded to 4 decimal places)

Now, let's calculate the confidence interval (CI) using the formula:

CI = X ± ME

CI = 114.9 ± 3.5455

The lower bound of the confidence interval is:

Lower bound = 114.9 - 3.5455 ≈ 111.3545 (rounded to 4 decimal places)

The upper bound of the confidence interval is:

Upper bound = 114.9 + 3.5455 ≈ 118.4545 (rounded to 4 decimal places

Learn more about standard deviation here:

https://brainly.com/question/23907081

#SPJ11

Therefore, the cross product is (7, 16, 7) in the same direction as the thumb in the right-hand rule.

To calculate the cross product of the vectors 2K(2, -1, 3) and (3, -1, 2), you can use the following formula where i, j, and k are the unit vectors in the x, y, and z directions respectively and a = 2K(2,-1, 3) and b = (3,-1,2) are the two vectors. The cross product can be calculated as: So, the cross product is (7, 16, 7) in the same direction as the thumb in the right-hand rule. Therefore, the main answer is: (7, 16, 7).

Therefore, the cross product is (7, 16, 7) in the same direction as the thumb in the right-hand rule.

To learn more about the fraction visit:

brainly.com/question/30154928

#SPJ11

Based on the provided expression, it seems you are trying to evaluate the limit:

lim(x→2) g(x)

where it is given that lim(x→2) g(x) = 9.

Using the given information, we can directly substitute the limit value into the expression:

lim(x→2) g(x) = 9

Therefore, the limit of g(x) as x approaches 2 is equal to 9.

To know more about expression visit-

brainly.com/question/31432995

#SPJ11

The volume of the rectangular box will be maximum when the length of the box is 7.14 cm and the height of the box is 238.10 cm³.

Let's consider the given sheet of metal.

Let the width of the rectangular box to be x.

So, the length of the box = 20 - 2x (as we have to remove width on both sides)

The height of the box = We have the formula of volume of a rectangular box as,

Volume of the rectangular box = length × width × heightV =

x(20 - 2x)yV = (20x - 2x²)yV = 20xy - 2x²y

We need to maximize the volume of the rectangular box by finding the values of x and y. We know that,

Area of metal sheet = Area of rectangular box + Area of waste metal sheet

50 × 20 = xy + 2xy + x(20 - 2x)50 × 20 =

3xy + 20x50 × 20 - 20x = 3xy50(20 - x)

= 3xySo, xy = 50(20 - x)/3Putting this value in the above equation, we get:V = 20x(50 - x)/3 - (2x²) maximizing V, dV/dx = 0dV/dx = 20(50 - 2x)/3 - 4x = 0(100 - 2x)/3 = 4x/3x = 100/14. ≈ 7.14 cm Putting this value in the above equation,  we get:y = 50(20 - 7.14)/3y ≈ 238.10 cm³

Therefore, the dimensions that will give the box with the largest volume are: x = 7.14 cm = 238.10 cm³

To know more about volume Visit:

https://brainly.com/question/13798973

#SPJ11

To construct a confidence interval for the mean amount spent on a child's last birthday gift, we can use the formula:

Confidence Interval = sample mean ± (critical value * standard error)

Given that we have a sample size of 10, a mean of $37, and a standard deviation of $4, we can calculate the standard error as:

Standard Error = standard deviation / sqrt(sample size)

Standard Error = $4 / sqrt(10)

Standard Error ≈ $1.27

Next, we need to determine the critical value corresponding to a 95% confidence level. Since the sample size is small (n < 30), we use a t-distribution instead of a z-distribution. With 10-1 = 9 degrees of freedom, the critical value for a 95% confidence level is approximately 2.262.

Now we can calculate the confidence interval:

Confidence Interval = $37 ± (2.262 * $1.27)

Confidence Interval ≈ $37 ± $2.88

Confidence Interval ≈ ($34.12, $39.88)

Therefore, at a 95% confidence level, the confidence interval for the mean amount spent on a child's last birthday gift is approximately $34.12 to $39.88.

To know more about Formula visit-

brainly.com/question/31062578

#SPJ11

The range of values that represent the middle 68% of the distribution is from 75 to 95.

In a normal distribution, the middle 68% of the data falls within one standard deviation from the mean. To find the range of values that represent the middle 68% of the distribution, we can calculate the upper and lower bounds.

Given:

Mean (μ) = 85

Standard Deviation (σ) = 10

To find the upper bound:

Upper Bound = Mean + Standard Deviation

Upper Bound = 85 + 10

Upper Bound = 95

To find the lower bound:

Lower Bound = Mean - Standard Deviation

Lower Bound = 85 - 10

Lower Bound = 75

Know more about range here:

https://brainly.com/question/29204101

#SPJ11

Forecast accuracy measures how accurately the forecast aligns with the actual outcome of a future event. It is an essential measure in production planning and control (PPC) to analyze the forecasting performance of the system.

PPC or production planning and control is a tool that helps in managing resources in the production process. It includes a set of functions that assists in maintaining inventory levels, scheduling of production, and managing workloads in the manufacturing process.Forecasting is one of the primary functions of PPC, which helps to estimate the future demand for a product or service.

Accurate forecasting is essential in PPC as it helps in avoiding overproduction, underproduction, and stockouts. Therefore, it is crucial to measure the accuracy of the forecast to determine the effectiveness of the PPC system in place.There are various methods to measure the forecast accuracy, such as Mean Absolute Deviation (MAD), Mean Squared Error (MSE), Mean Absolute Percentage Error (MAPE), Symmetric Mean Absolute Percentage Error (SMAPE), and Tracking Signal. All these methods give a value to the difference between the forecasted demand and the actual demand.Therefore, forecast accuracy the measurement of forecast accuracy is an essential tool in PPC to estimate the effectiveness of the forecasting system.

To know more about Forecast accuracy visit :-

https://brainly.com/question/32671007

#SPJ11

Answer:

This is a geometric sequence with common ratio 1/4.

The correct answer is d.

The values of x in the diagram is as follows:

14. x = 49 degrees

15. x = 58 degrees

Complementary angles are angles that sum up to 90 degrees while supplementary angles are angles that sum up to 180 degrees.

Therefore, let's use the angle relationships to find the angle x in the diagram as follows:

Hence,

14.

x + x - 8 = 90

2x - 8 = 90

2x = 90 + 8

2x = 98

divide both side of the equation by 2

x = 98 / 2

x = 49 degrees

15.

2x + 6 + x = 180

3x + 6 = 180

3x = 180 - 6

3x = 174

divide both sides by 3

x = 174 / 3

x = 58 degrees

learn more on angles here: https://brainly.com/question/29167267

#SPJ1

In total there is a whole 89.44% chance that a randomly selected value from the normally distributed variable X will be less than or equal to 14.

The probability of X ≤ 14 can be calculated by standardizing the variable X using the formula z = (X - μ) / σ, where z is the standardized value. In this case, z = (14 - 11.5) / 2 = 1.25.

Next, we look up the cumulative probability corresponding to the standardized value of 1.25 in the standard normal distribution table or use statistical software/tools. The cumulative probability for z = 1.25 is approximately 0.8944.

Therefore, the probability of X ≤ 14 is 0.8944, or approximately 89.44%.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

The length of side BC is approximately 8.72 km.

To find the length of side BC using the cosine rule, we can use the following formula:

BC² = AB² + AC² - 2 AB AC Cos(A)

where BC represents the length of side BC, AB represents the length of side AB, AC represents the length of side AC, and A represents the angle opposite to side BC.

Plugging in the given values:

BC² = (25.3 km)² + (16.7 km)² - 2 (25.3 km) (16.7 km) Cos(68.5°)

BC² = 640.09 km² + 278.89 km² - 2 × 25.3 km × 16.7 km × cos(68.5°)

BC² = 919.98 km² - 843.91 km²

BC² = 76.07 km²

Taking the square root of both sides:

BC = √76.07 km

BC ≈ 8.72 km

Therefore, the length of side BC is approximately 8.72 km.

Learn more about Cosine law click;

https://brainly.com/question/30918098

#SPJ1

Using the given sin θ = 4/8, we can calculate the value of tan θ to determine the correct option. The correct option is option (d) .

To find the value of tan θ, we can use the identity tan θ = sin θ / cos θ. Given sin θ as 4/8, we need to find cos θ in order to calculate tan θ. Using the Pythagorean identity sin² θ + cos² θ = 1, we can solve for cos θ by substituting the value of sin θ: (4/8)² + cos² θ = 1.

Simplifying, we get 16/64 + cos² θ = 1, which further simplifies to 1/4 + cos² θ = 1. Solving for cos θ, we find cos θ = √3/2.

Now we can calculate tan θ using tan θ = sin θ / cos θ, which gives us (4/8) / (√3/2) = 4/(8√3/2) = 4√3/8 = √3/2. Therefore, option (d) is the correct answer.


Learn more about Trigonometry identities click here :brainly.com/question/29131702

#SPJ11

The equation of the word problem is N = 50 + n, where N represents the width of Jack's new TV, n represents the additional width of the new TV compared to the old TV, and 50 represents the width of Jack's old TV.

The equation representing the word problem can be derived as follows:

Let's assume the width of Jack's new TV is N inches. According to the information given, Jack's new TV is n inches wider than his old TV, which was 50 inches wide. This can be expressed as:

N = 50 + n

The equation above represents the relationship between the width of Jack's new TV (N), the width of his old TV (50 inches), and the additional width (n inches) of the new TV.

To further simplify, we can substitute the value of n with the specific number of inches wider Jack's new TV is compared to his old TV. Let's say Jack's new TV is 20 inches wider than his old TV. We can substitute n with 20 in the equation:

N = 50 + 20

Simplifying further, we find:

N = 70

This equation represents the specific case where Jack's new TV is 20 inches wider than his old TV, resulting in a width of 70 inches for the new TV.

In general, the equation can be modified to accommodate any value for n, representing the width difference between the new and old TV:

N = 50 + n

For more such questions on equation

https://brainly.com/question/29174899

#SPJ8

In language pertaining to the context of the problem, we can say:

Using methods that are correct 90% of the time, we estimate that the average weight of turkeys is between 14.0498 lbs and 16.6036 lbs.

To form a 90% confidence interval for the average weight of a turkey using the given data, we can use the following steps:

1. Calculate the sample mean:

Sum up all the turkey weights and divide by the total number of turkeys:

Mean = (19 + 21 + 15 + 14 + 12 + 20 + 10 + 18 + 12.5 + 15 + 13 + 12 + 15.4 + 18 + 16) / 15 ≈ 15.3267

2. Calculate the sample standard deviation:

Find the square root of the sum of squared deviations from the mean divided by (n-1):

Standard deviation = sqrt(((19-15.3267)^2 + (21-15.3267)^2 + ... + (16-15.3267)^2) / (15-1)) ≈ 2.9561

3. Calculate the margin of error:

The margin of error is determined by multiplying the critical value (z-score) by the standard deviation and dividing by the square root of the sample size. For a 90% confidence level, the critical value is approximately 1.645:

Margin of error = 1.645 * (2.9561 / sqrt(15)) ≈ 1.2769

4. Calculate the confidence interval:

The confidence interval is obtained by subtracting the margin of error from the sample mean and adding it to the sample mean:

Lower bound = Mean - Margin of error = 15.3267 - 1.2769 ≈ 14.0498

Upper bound = Mean + Margin of error = 15.3267 + 1.2769 ≈ 16.6036

with 90% confidence, we estimate that the mean weight of turkeys is between approximately 14.0498 lbs and 16.6036 lbs.

To know more about number visit:

brainly.com/question/3589540

#SPJ11

If f(x) + g(x), f(x) = g(x), f(x) · g(x), X f(x): x + 7 g(x) = x² (a) f(x) + g(x) (b) f(x) - g(x) (c) f(x) · g(x) . f(x) (d) g(x) (e) f(g(x)) (f) g(f(x)) = f(x) g(x) f(g(x)), and g(f(x)), if define then- he expression is: f(x) · g(x) = x³ + 7x²

To find the expressions requested, we will substitute the given functions into the respective equations. Let's solve each part one by one:

Given:

f(x) = x + 7

g(x) = x²

(a) f(x) + g(x):

Substituting the functions:

f(x) + g(x) = (x + 7) + (x²)

Combining like terms:

f(x) + g(x) = x + 7 + x²

(b) f(x) - g(x):

Substituting the functions:

f(x) - g(x) = (x + 7) - (x²)

Expanding the expression:

f(x) - g(x) = x + 7 - x²

(c) f(x) · g(x):

Substituting the functions:

f(x) · g(x) = (x + 7) · (x²)

Expanding the expression:

f(x) · g(x) = x³ + 7x²

(d) g(x):

Substituting the function:

g(x) = x²

(e) f(g(x)):

Substituting the functions:

f(g(x)) = f(x²)

Substituting f(x) = x + 7 into f(g(x)):

f(g(x)) = x² + 7

(f) g(f(x)):

Substituting the functions:

g(f(x)) = g(x + 7)

Substituting g(x) = x² into g(f(x)):

g(f(x)) = (x + 7)²

Expanding the expression:

g(f(x)) = x² + 14x + 49

(g) f(x) · g(x), if defined:

We already solved this in part (c), and the expression is:

f(x) · g(x) = x³ + 7x²

Learn more about  expressions   here-

https://brainly.com/question/26152499

#SPJ4

The bond's coupon rate is approximately 7.4043%.

To find the bond's coupon rate, we need to use the formula for calculating yield to maturity and solve for the coupon rate.

The yield to maturity formula for a bond is:

Price = (Coupon Payment / (1 + Yield)^1) + (Coupon Payment / (1 + Yield)^2) + ... + (Coupon Payment + Face Value) / (1 + Yield)^n,

where Price is the current price of the bond, Coupon Payment is the annual coupon payment, Yield is the yield to maturity, and n is the number of years until maturity.

In this case, the bond's price is $900.53, the yield to maturity is 6.3%, the coupon payment is unknown, and the bond has a maturity of five years.

Using the formula, we can set up the equation:

$900.53 = (Coupon Payment / (1 + 0.063)^1) + (Coupon Payment / (1 + 0.063)^2) + (Coupon Payment / (1 + 0.063)^3) + (Coupon Payment / (1 + 0.063)^4) + (Coupon Payment + $1,000) / (1 + 0.063)^5.

Now we need to solve this equation to find the coupon payment.

Using a financial calculator or software, we can find that the coupon payment is approximately $74.043.

To calculate the coupon rate, we divide the coupon payment by the face value of the bond and multiply by 100:

Coupon Rate = (Coupon Payment / Face Value) * 100 = ($74.043 / $1,000) * 100 = 7.4043%.

Learn more about coupon rate here :-

https://brainly.com/question/30079417

#SPJ11

Given that sin(θ) = -5/8, we can determine csc(θ) by finding the reciprocal of sin(θ). In this case, csc(θ) is equal to -8/5.

The sine function (sin) represents the ratio of the length of the side opposite to an angle in a right triangle to the hypotenuse.

In this problem, sin(θ) is given as -5/8. To find csc(θ), we need to calculate the reciprocal of sin(θ). The reciprocal of a number is obtained by dividing 1 by that number.

Since sin(θ) = -5/8, we can write csc(θ) as 1/sin(θ). By substituting the value of sin(θ) as -5/8, we get csc(θ) = 1/(-5/8).

To divide by a fraction, we invert the divisor and multiply. Therefore, csc(θ) = 1 * (8/-5) = -8/5.

In conclusion, if sin(θ) is given as -5/8, then csc(θ) is equal to -8/5. The cosecant function (csc) represents the reciprocal of the sine function, and by applying the appropriate calculations, we can determine the value of csc(θ) based on the given information.

Learn more about cosecant function :

https://brainly.com/question/29044147

#SPJ11