A ray of light is incident on a block of diamond. n= 3/2 at an
angle of 45 degree with the normal.
a) Find the angle of refraction at the boundary at A
b) Find the critical angle for the diamond
c) On

When slowly increasing the angle of incidence while observing the refracted ray on the viewing screen, the colors start to separate when the angle of refraction reaches a certain value. This angle is known as the critical angle. At this critical angle, the separation of colors is maximized.

The specific angle at which the colors start to separate and the angle at which the separation is a maximum depend on the materials involved. This phenomenon is known as dispersion, where different wavelengths of light refract differently, causing the colors to separate. In a typical scenario with air and a glass medium, the critical angle for noticeable color separation is around 42 degrees, and the maximum separation occurs at approximately 90 degrees. The colors that are observed and their order of increasing angle of refraction can be described by the acronym ROYGBIV, which stands for red, orange, yellow, green, blue, indigo, and violet. As the angle of refraction increases, the separation between these colors becomes more pronounced.

Learn more about here:

https://brainly.com/question/13856239

#SPJ11

In accounting, it is important to keep track of every check number to ensure that there are no errors in transactions. Suppose there are missing check numbers or double-counted checks. In that case, certain types of texting should be used to resolve these accounting issues

Therefore, here's the type of texting that can be used to find missing check numbers and double-counted checks:1. Finding missing check numbers:

To locate the missing check numbers, you can use an enquiry letter to the bank to inquire about the missing check. A letter of enquiry can be mailed to the bank, requesting a copy of the missing check or to verify if the check was cashed. This type of texting is ideal for tracking down missing checks.

2. Double-counted check: A double-counted check occurs when a check is entered twice in the cash book. One way to verify that a check has been entered twice is to review the cash book or bank statement. Reconciling the cash book with the bank statement is a method that can be used to verify that the check was double-counted. This type of texting is ideal for tracking down double-counted checks.

In conclusion, while texting methods are not widely used in accounting, letters of enquiry to the bank are useful in finding missing check numbers. The process of reconciling the cash book with the bank statement is ideal for tracking down double-counted checks.

To learn more about accounting visit;

https://brainly.com/question/5640110

#SPJ11

The occupations which are listed and involved some form of work are Orange picker, Delivery driver,  Lumberjack, Moving man and  Truck driver.

In physics, the concept of "work" has a specific definition that relates to the transfer of energy. Occupations that involve physical tasks and the transfer of energy can be considered as producing work in the context of physics. Here are some occupations from the list that can be associated with work in physics:

1. Orange picker: This occupation involves physical labor to pick oranges, which requires exerting force and doing mechanical work against gravity.

2. Delivery driver: Delivery drivers perform work when they lift and carry packages, loading and unloading them from vehicles, which involves applying force over a distance.

3. Lumberjack: Lumberjacks engage in physically demanding work, such as cutting down trees and splitting wood, which requires the application of force and energy.

4. Moving man: Moving professionals lift and transport heavy furniture and boxes, which involves doing work against gravity and overcoming the resistance of objects.

5. Truck driver: While driving itself may not involve work in the physics sense, truck drivers may perform physical tasks like loading and unloading cargo, which can involve exerting force and doing work.

for more questions on work
https://brainly.com/question/25573309
#SPJ8

The strength of the electric field of a point charge of magnitude is A, 3.6 × 10⁴ N/C.

The strength of the electric field of a point charge is given by the formula:

E = kq/r²

Where:

k = Coulomb constant, 9.00 × 10⁹ N⋅m²/C²

q = charge, 6.4 × 10⁻¹⁹ C

r = distance, 4.0 × 10⁻³ m

Plugging in the values:

E = [(9.00 × 10⁹ N⋅m²/C²)(6.4 × 10⁻¹⁹ C)] / (4.0×10⁻³ m)²

= 3.6 × 10⁴ N/C

Therefore, the strength of the electric field is 3.6 × 10⁴ N/C.

Find out more on electric field strength here: https://brainly.com/question/26199225

#SPJ1

The dimensions and SI units for A, t, and C in the equation v = Av²t + B are:

- A has dimensions of [1]/[L] and its SI unit is 1/meter (1/m).

- t has dimensions of [T] and its SI unit is seconds (s).

To obtain the dimensions and SI units for the variables A, t, and C in the equation v = Av²t + B, we can analyze the equation using dimensional analysis.

The equation is:

v = Av²t + B

Let's assign dimensions and units to each term:

- v has dimensions of velocity, [L]/[T] (length per time), and its SI unit is meter per second (m/s).

- Av²t has dimensions of [A][L]²[T], where [A] represents an unknown dimension and [L] and [T] are length and time dimensions, respectively. The SI unit will depend on the dimensions of A and t.

- B has dimensions of velocity, [L]/[T] (length per time), and its SI unit is also meter per second (m/s).

Equating the dimensions on both sides of the equation, we have:

[L]/[T] = [A][L]²[T] + [L]/[T]

To balance the dimensions, the dimensions of [A] must be [1]/[L] and the dimensions of [t] must be [T].

Therefore, the dimensions and SI units for A, t, and C in the equation v = Av²t + B are:

- A has dimensions of [1]/[L] and its SI unit is 1/meter (1/m).

- t has dimensions of [T] and its SI unit is seconds (s).

- C does not appear in the given equation, so we cannot determine its dimensions or SI units based on the given information.

To know more about dimensional analysis, refer to the link below:

https://brainly.com/question/30303546#

#SPJ11

The density of the given substance is 8.9 g/cm³. The given substance has a volume of 10.0 cm³ and a mass of 89 grams.

We are to find the density of the given substance. The formula for density is:density = mass/volumeWe can now substitute the given values into the formula and get: density = mass/volume=>density = 89 g/10.0 cm³We simplify this expression as shown below: density = 8.9 g/cm³

Therefore, the density of the substance is 8.9 g/cm³.The response to this question has used only 100 words. To give a more detailed response, we can provide the following explanation:Explanation:When we want to find the density of a substance, we need to know its mass and volume. Density is the ratio of the mass of a substance to its volume, and it is expressed in grams per cubic centimeter (g/cm³).

The formula for density is: density = mass/volume Where density is in g/cm³, mass is in grams (g), and volume is in cubic centimeters (cm³).To find the density of the given substance, we have been given its mass and volume. We simply substitute these values into the formula and simplify to get the density. Therefore, the density of the given substance is 8.9 g/cm³.

To learn more about volume visit;

https://brainly.com/question/28058531

#SPJ11

Ohm's law is a fundamental principle in physics and electrical engineering that relates the current flowing through a conductor to the voltage applied across it. It states that the current (I) passing through a conductor is directly proportional to the voltage (V) across the conductor, and inversely proportional to the resistance (R) of the conductor.

The current along 20 ohms in a circuit with two resistors, 20 ohms and 30 ohms, which are connected in parallel, and this combination is connected in a series to an 8 ohms resistor and a battery of e.m.f. 12 volts can be calculated as follows: The equivalent resistance for the two resistors connected in parallel by using the formula 1/Rt = 1/R1 + 1/R2, where R1 and R2 are the resistors in parallel.1/Rt = 1/20 + 1/30 = 3/60 + 2/60 = 5/60Rt = 60/5 = 12 ohms.

The equivalent resistance of the two parallel resistors is 12 ohms.

Now, calculate the total resistance of the circuit by adding the equivalent resistance of the parallel resistors and the 8 ohms resistor.

Rtotal = 12 + 8 = 20 ohmsThe total resistance of the circuit is 20 ohms.

Finally, calculate the current along the 20 ohms resistor using Ohm's law, which states that I = V/R, where V is the voltage of the battery and R is the resistance. I = V/R = 12/20 = 0.6 A.

The current along the 20 ohms resistor is 0.6 A.

Learn more about resistor here ;

https://brainly.com/question/30672175

#SPJ11

The answer to the question is liquid.

The earth has various layers, and the outer core is the second layer from the earth's center, located between the mantle and the earth's inner core. The outer core is a liquid layer made up of molten iron and nickel, and it is responsible for producing the earth's magnetic field.

According to scientists, the earth's outer core is a liquid layer made up of molten iron and nickel, and it is responsible for producing the earth's magnetic field.

The outer core is about 2,300 kilometers thick and is located between the earth's mantle and the inner core. The temperature in the outer core ranges from 4,000 to 5,000 degrees Celsius, and the pressure is about 1.3 million times that of the earth's surface.

The outer core is liquid due to the high temperatures and pressure that exist there. The liquid outer core moves as it produces the earth's magnetic field, which is essential to life on earth.

Learn more about pressure

brainly.com/question/30673967

#SPJ11

Option a is correct.

F=GMm/R²

where F is the gravitational force or weight

G is the universal constant of gravitation

M is the mass of Earth

m is the mass of the object

R is the distance between the center of the earth and the object

Given,

initial distance R =4000miles

weight at surface of the earth F=400lb

Let the force be F' for a distance R' from earth's center.

Here R' = radius+ height of the tower = R+4000 miles = 4000 + 4000 = 8000 miles.

Since the other terms in the formula remain constant, the new weight F' can be calculated as follows:

F'/F = R²/R'(otherwise the inverse square law in gravitation)

F'/400=(4000)²/(8000)²

F' = 100 lb

Thus option a is correct.

For more information about the inverse square law in , visit

https://brainly.com/question/30556863?referrer=searchResults

The weight of the body on a 4000-mile high tower would still be 400 lbs.

The weight of an object depends on the gravitational acceleration at its location. On the surface of the Earth, the gravitational acceleration is approximately 32 ft/s2. Therefore, a 400 lb body on the Earth's surface would weigh 400 lbs. If the body were placed on a 4000-mile high tower, it would be much farther from the center of the Earth and experience a weaker gravitational pull. The weight of the body would decrease as the square of the ratio of the radii of the tower and the Earth. So, the weight on the tower would be:

Weight on the tower = (400 lb) * (4000 mi/4000 mi)2 = 400 lb * 1 = 400 lb

https://brainly.com/question/35699425

#SPJ6

4. Red light with a wavelength of 725 nm enters glass with index of refraction 1.52.Located within the glass block is a single slit.and a screen is placed 1.25 m away.If the width of the slit is 18.5m (a)The width of the central maximum is approximately 0.275°.(b)The width of the central maximum is approximately 6.052 × 10^(-6) cm.(5)In this case, the wavelength falls within the range of green light, so the soap bubble will appear green from the other side

(4) To calculate the width of the central maximum, we can use the formula:

Width of central maximum = (wavelength * distance to screen) / (slit width * index of refraction)

Given:

Wavelength of red light (λ) = 725 nm = 725 × 10^(-9) m

Distance to screen (D) = 1.25 m

Slit width (w) = 18.5 μm = 18.5 × 10^(-6) m

Index of refraction (n) = 1.52

(a) Width of central maximum in degrees:

To convert the width to degrees, we can use the small angle approximation:

Width in degrees ≈ (Width of central maximum / Distance to screen) * (180° / π)

Substituting the values into the formula:

Width of central maximum = (725 × 10^(-9) m * 1.25 m) / (18.5 × 10^(-6) m * 1.52) ≈ 6.052 × 10^(-4) m

Width in degrees ≈ (6.052 × 10^(-4) m / 1.25 m) * (180° / π) ≈ 0.275°

So, the width of the central maximum is approximately 0.275°.

(b) Width of central maximum in centimeters:

To convert the width to centimeters, we can simply divide by 100:

Width in centimeters = (Width of central maximum) / 100 ≈ 6.052 × 10^(-4) m / 100 ≈ 6.052 × 10^(-6) cm

So, the width of the central maximum is approximately 6.052 × 10^(-6) cm.

(5)  To determine the color of light transmitted through the soap film, we need to consider the interference of light waves. When light reflects off the top and bottom surfaces of the film, interference occurs. Depending on the thickness of the film and the wavelength of light, certain colors will be enhanced or canceled out.

Given:

Thickness of soap film (d) = 175 nm = 175 × 10^(-9) m

Index of refraction of soap film (n) = 1.35

To find the color of light transmitted, we can use the equation:

2 * n * d = m * λ

where:

m is the order of the interference (m = 1 for the first-order maximum)

λ is the wavelength of light

Rearranging the equation to solve for λ:

λ = (2 * n * d) / m

Substituting the values:

λ = (2 * 1.35 * 175 × 10^(-9) m) / 1

λ ≈ 4.73 × 10^(-7) m

The wavelength of light transmitted is approximately 4.73 × 10^(-7) m.

By comparing the wavelength to the visible light spectrum, we can determine the corresponding color. In this case, the wavelength falls within the range of green light, so the soap bubble will appear green from the other side.

To learn more about Width of central maximum visit: https://brainly.com/question/28555914

#SPJ11

A thin layer of liquid methylene lodide (n=1.756) is sandwiched between two flat, parallel plates of glass (n=1.50).To ensure strong reflection, the light must be incident at an angle greater than 53.63 degrees with respect to the normal to the interface between the liquid and the glass. Therefore, the thickness of the liquid layer should be chosen such that the angle of incidence exceeds this critical angle.

To achieve strong reflection, we can utilize the phenomenon of total internal reflection. This occurs when light travels from a medium with a higher refractive index to a medium with a lower refractive index and the angle of incidence exceeds the critical angle.

In this case, we have a layer of liquid methylene iodide (n = 1.756) sandwiched between two glass plates (n = 1.50). To maximize reflection, we want to ensure that the light is incident at an angle greater than the critical angle for total internal reflection at the liquid-glass interface.

The critical angle can be calculated using the formula:

Critical angle = arcsin(n2/n1)

Where n1 is the refractive index of the medium from which light is coming (in this case, the liquid) and n2 is the refractive index of the medium in which light is entering (in this case, the glass).

In this scenario:

n1 = 1.756 (methylene iodide)

n2 = 1.50 (glass)

Critical angle = arcsin(1.50/1.756)

Critical angle ≈ 53.63 degrees

To ensure strong reflection, the light must be incident at an angle greater than 53.63 degrees with respect to the normal to the interface between the liquid and the glass. Therefore, the thickness of the liquid layer should be chosen such that the angle of incidence exceeds this critical angle.

To learn more about Critical angle visit: https://brainly.com/question/28406910

#SPJ11

Therefore, the angle of the camera should be turning at a speed of approximately 0.4 rad/s (radian per second) when the jet flies right above the crew.

In order to closely track the plane, how fast (radian per second) should the angle of the camera be turning when the jet flies right above the crew?

The angular speed (ω) can be calculated by using the formula;ω = v/r

Where, v is the linear speed of the object and r is the radius of the circular path.ω = 400/r

For the camera to track the plane, the angular speed should be the same as the angular speed of the plane. When the plane flies right above the crew, the angle covered is equal to 2π radians or 360 degrees. So, the angular speed (ω) can be calculated as;ω = (2π rad)/(time)

Where time is the time taken to complete 1 revolution.ω = 2π/time

Since the time is not given, we cannot find the exact value of ω. However, we can find the value of time using the formula;

distance = speed x time

Distance covered by the plane in 1 revolution = 2πr

Where r is the radius of the circular path.

In this case, r = 1000m.Distance = 2π x 1000 = 6283.19m

The time taken to cover this distance at a speed of 400 m/s can be calculated as;

time = distance/speed= 6283.19/400= 15.71 seconds

Therefore, the angular speed of the camera should be;ω = 2π/15.71≈ 0.4 rad/s

to know more about angular speed visit:

https://brainly.com/question/29058152

#SPJ11

To ensure that the image of the bridge covers the entire detector, the camera's lens should have a focal length equal to the diagonal of the detector.

This is known as the focal length of the diagonal.

To ensure that the image of the bridge covers the entire detector, the camera's lens should have a focal length equal to the diagonal of the detector.

This is known as the focal length of the diagonal.

To ensure that the image of the bridge covers the entire detector, the camera's lens should have a focal length equal to the diagonal of the detector.

This is known as the focal length of the diagonal.

Learn more about focal length

brainly.com/question/31755962

#SPJ11

2.00 radians  is  angle in radians is subtended by an arc.

We are given the radius, r = 1.50 mand the length of the arc, l = 3.00 m.

We are required to find the angle in radians that is subtended by an arc with length l on the circumference of a circle whose radius is r.

Let us first find the angle subtended in degrees.

The formula used to find

                               the angle isθ = (l/r) × (180/π)                   where, θ = angle subtended in degrees      l = length of the arcr = radius of the circle

                   π = 22/7θ = (3/1.5) × (180/22/7)θ = 114.59°

To find the angle in radians, we know that 360° = 2π radians

Therefore,θ in radians = (114.59/180) × π= 2.00 radians (approximately)

Hence, the angle in radians that is subtended by an arc 3.00 m in length on the circumference of a circle whose radius is 1.50 m is 2.00 radians (approximately). Therefore, the detail ans is 2.00 radians.

Learn more about circumference of a circle

brainly.com/question/17130827

#SPJ11

A ratio can be expressed in different formats such as in the form of fraction, decimal, or percentage. If the ratio is in fraction form, we can simplify it by dividing the numerator and denominator by their highest common factor.

Given that the ratio of distance d to 100ft is the same as the ratio of 30ft to 50ft. The ratio of distance to 100ft = 30/50.

Simplifying 30/50, we get 3/5.So, we have d/100 = 3/5Multiplying both sides by 100, we getd = 100 x 3/5d = 60.

Therefore, the distance d is 60 feet.

Learn more about distance here ;

https://brainly.com/question/13034462

#SPJ11

Final velocity of the electron, v = 5.4 × 10⁶ m/s.

Potential difference, ΔV = 2500 V;

Charge on an electron, q = 1.6 × 10⁻¹⁹ C;

Mass of an electron, m = 9.1 × 10⁻³¹ kg

the final velocity of an electron using the formula, v = √((2qΔV) / m)Where, v = final velocity of an electron after traveling over a potential difference ΔVq = charge on the electron , m = mass of the electron.

Substituting the given values in the above equation,

we getv = √((2 × 1.6 × 10⁻¹⁹ C × 2500 V) / 9.1 × 10⁻³¹ kg)

Therefore, the final velocity of the electron is 5.4 × 10⁶ m/s.

An electron of mass 9.1 × 10⁻³¹ kg is released from rest and travels over a potential difference of 2500 V.

We can calculate the final velocity using the formula for kinetic energy, K = (1/2) mv²

Where, K = Kinetic energy of the electron , m = mass of the electron , v = final velocity of the electron.

The initial kinetic energy of the electron is zero, as it is released from rest.

Hence, the total energy gained by the electron is equal to its final kinetic energy.

The potential difference ΔV between the two points is given as 2500 V.

Hence, the work done by the electric field in moving an electron of charge q from one point to another with a potential difference ΔV is given by W = qΔV

We know that the work done is equal to the change in kinetic energy, as per the work-energy theorem.

So, the work done by the electric field in accelerating an electron is given byqΔV = (1/2) mv²Solving for v,v = √((2qΔV) / m)

On substituting the values given in the question,

we get v = √((2 × 1.6 × 10⁻¹⁹ C × 2500 V) / 9.1 × 10⁻³¹ kg)

Final velocity of the electron, v = 5.4 × 10⁶ m/s.

Learn more about velocity of the electron

brainly.com/question/31601296

#SPJ11

A resting electron is liberated, and it moves over a 2500 volt potential difference. Therefore, the final velocity of the electron after traveling over a potential difference of 2500 V is approximately 5.93 x 10⁶ m/s.

The idea of energy conservation can be used to determine an electron's final velocity after it crosses a 2500 V potential difference. The change in the electron's potential energy caused by the electric potential difference can be transformed into kinetic energy.

The potential energy (PE) gained by the electron is given by:

PE = q × V

Where:

q is the charge of the electron (1.6 x 10⁻¹⁹ C),

V is the potential difference (2500 V).

The change in potential energy is equal to the change in kinetic energy:

ΔPE = ΔKE

Therefore, we have:

q × V = (1/2) × m × v²

Where:

m is the mass of the electron (9.1 x 10⁻³¹ kg),

v is the final velocity of the electron.

Rearranging the equation, we can solve for v:

v² = (2 × q × V) / m

v = √((2 × q × V) / m)

Plugging in the values, we have:

v = √((2 × (1.6 x 10⁻¹⁹ C) × (2500 V)) / (9.1 x 10⁻³¹ kg))

v = 5.93 x 10⁶ m/s

To know more about velocity

https://brainly.com/question/80295

#SPJ4

The frequency of the vibration is approximately 50 Hz, calculated using the formula v = fλ, where v is the wave speed and λ is the wavelength determined by the length of the string and the number of loops.

In a standing wave, the length of the string can be related to the wavelength of the wave by the equation:

λ = 2L/n,

where λ is the wavelength, L is the length of the string, and n is the number of loops.

In this case, the length of the string L is given as 2.7 m, and the number of loops n is 3. Plugging in these values, we can solve for the wavelength:

λ = 2(2.7 m)/3

λ = 1.8 m.

The wave speed v is given as 90 m/s. The frequency f can be calculated using the formula:

v = fλ.

Rearranging the equation, we have:

f = v/λ = 90 m/s / 1.8 m

f = 50 Hz.

Therefore, the frequency of the vibration is approximately 50 Hz.

The frequency of the vibration is approximately 50 Hz, calculated using the formula v = fλ, where v is the wave speed and λ is the wavelength determined by the length of the string and the number of loops.

To know more about frequency visit:

https://brainly.com/question/29213586

#SPJ11

Answer: false

Explanation: Similar poles always repel and only different poles attract (south pole and north pole attract) but (north pole and north pole/ south pole and south pole repel).

The volume of 1.0 mol of an ideal gas starting at 1.0 atm and 77°F is 24.4 L.

The volume of 1.0 mol of an ideal gas starting at 1.0 atm and 77°F can be calculated using the ideal gas law equation: PV = nRT where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

Using the given values of P = 1.0 atm, T = 77°F = 298.15 K, and n = 1.0 mol, we can rearrange the equation to solve for V:V = nRT/P = (1.0 mol)(0.08206 L·atm/(mol·K))(298.15 K)/(1.0 atm) = 24.4 L

So the volume of 1.0 mol of an ideal gas starting at 1.0 atm and 77°F is 24.4 L.

Know more about ideal gas law here:

https://brainly.com/question/12624936

#SPJ11

Given data Initial velocity, u = 300 m/s Angle of projection, θ = 54.5°Time of flight, t = 42 s For projectile motion, we have the following kinematic equation s:u_x = u cos θu_y = u sin θx = u_x t + (1/2) a_x t^2y = u_y t + (1/2) a_y t^2u_x is the horizontal component of the initial velocity of the projectile, and u_y is the vertical component of the initial velocity of the projectile. a_x is the horizontal component of the acceleration of the projectile, and a_y is the vertical component of the acceleration of the projectile.

We can find u_x and u_y using trigonometric ratios. u_x = u cos θ = (300 m/s) cos 54.5° = 172.7 m/su_y = u sin θ = (300 m/s) sin 54.5° = 247.7 m/sa_x = 0 (assuming no air resistance) a_y = - g = - 9.81 m/s^2 (taking downward direction as positive) From the equation of motion in y direction, we have y = u_y t + (1/2) a_y t^2 ⇒ y = 247.7 m/s × 42 s + (1/2) (- 9.81 m/s^2) (42 s)^2⇒ y = 10470.6 m

The maximum height reached by the projectile = H = u_y^2 / (2 a_y) = (247.7 m/s)^2 / (2 × 9.81 m/s^2) = 3139.4 mWe can also find the horizontal distance traveled by the projectile using the equation of motion in x direction:x = u_x t = 172.7 m/s × 42 s = 7253.4 m Therefore, the x-coordinate of the impact point is 7253.4 m, and the y-coordinate of the impact point is 10470.6 m. Thus, the coordinates of the impact point are:X = 7253.4 mY = 10470.6 m.

Know more about initial velocity:

https://brainly.com/question/28395671

#SPJ11

To find the x- and y-coordinates of the cannonball's impact point, we need to break down the initial velocity into its x and y components. The x-coordinate is found using the equation Vx = V * cos(θ), and the y-coordinate is found using the equation y = Vy * t + (1/2) * a * t^2. Plugging in the given values, the x-coordinate is 7587.9 m and the y-coordinate is 10049.4 m, relative to the firing point.

To find the x- and y-coordinates of the cannonball's impact point, we need to break down the initial velocity into its x and y components. The component in the x-direction is given by the equation Vx = V * cos(θ), where V is the initial velocity and θ is the angle of firing. Plugging in the given values, we get Vx = 300 * cos(54.5°) = 300 * 0.60182 = 180.546 m/s.

Next, we need to find the time it takes for the cannonball to reach the impact point. Since the cannonball was fired horizontally in the x-direction, the time of flight can be found using the equation t = d / Vx, where d is the horizontal displacement. Rearranging this equation to solve for d, we have d = t * Vx. Plugging in the given values, we get d = 42.0 s * 180.546 m/s = 7587.9 m.

The y-component of the velocity is given by the equation Vy = V * sin(θ), so Vy = 300 * sin(54.5°) = 300 * 0.79862 = 239.586 m/s. The vertical displacement can be found using the equation y = Vy * t + (1/2) * a * t^2, where a is the acceleration due to gravity (-9.8 m/s^2) and t is the time of flight. Plugging in the given values, we get y = 239.586 m/s * 42.0 s + (1/2) * (-9.8 m/s^2) * (42.0 s)^2 = 10049.4 m.

Therefore, the x-coordinate of the impact point is 7587.9 m and the y-coordinate is 10049.4 m, relative to the firing point.

https://brainly.com/question/20627626

#SPJ2

Answer:amplitude

Explanation:

A surfer is drifting west at 2 m/s. He catches a wave, and it accelerates him north at 6 m/s² for 3 seconds.(i)The final velocity of the surfer after the acceleration is 16 m/s northward.(II) The surfer will have traveled 21 meters northward when he stops accelerating.

i. To find the final velocity of the surfer after the acceleration, we can use the formula:

v = u + at

where:

Given:

Initial velocity (u) = 2 m/s (westward)

Acceleration (a) = 6 m/s² (northward)

Time (t) = 3 seconds

The initial velocity is in the westward direction, so we can consider it as negative. Let's calculate the final velocity (v):

v = u + at

v = -2 m/s + (6 m/s² * 3 s)

v = -2 m/s + 18 m/s

v = 16 m/s (northward)

Therefore, the final velocity of the surfer after the acceleration is 16 m/s northward.

ii. To find the distance traveled northward during the acceleration, we can use the equation:

s = ut + (1/2)at²

where:

s is the distance traveled,

u is the initial velocity,

a is the acceleration, and

t is the time.

Given:

Initial velocity (u) = 2 m/s (westward)

Acceleration (a) = 6 m/s² (northward)

Time (t) = 3 seconds

Since the initial velocity is westward, we can consider it as negative. Let's calculate the distance traveled (s):

s = ut + (1/2)at²

s = -2 m/s * 3 s + (1/2) * 6 m/s² * (3 s)²

s = -6 m + (1/2) * 6 m/s² * 9 s²

s = -6 m + 27 m

s = 21 m (northward)

Therefore, the surfer will have traveled 21 meters northward when he stops accelerating.

To learn more about velocity  visit: https://brainly.com/question/80295

#SPJ11

A color television tube also generates some x rays when its electron beam strikes the screen.he shortest wavelength of the X-rays produced by the color television tube, when a 30.0-kV potential is used to accelerate the electrons, is approximately 2.26 angstroms (Å).

The shortest wavelength of X-rays produced by a color television tube can be determined using the formula for calculating the wavelength of X-rays generated by an accelerating voltage. The formula is given by:

Λ = (12.4 Å)/(√V)

Where:

Λ is the wavelength of the X-rays in angstroms (Å)

V is the accelerating voltage in kilovolts (kV)

Given that the accelerating voltage is 30.0 kV, we can substitute this value into the formula:

Λ = (12.4 Å)/(√30.0 kV)

Calculating the square root of 30.0 kV:

√30.0 kV ≈ 5.48 kV

Substituting this value into the formula:

Λ ≈ (12.4 Å)/(5.48 kV)

Calculating the wavelength:

Λ ≈ 2.26 Å

Therefore, the shortest wavelength of the X-rays produced by the color television tube, when a 30.0-kV potential is used to accelerate the electrons, is approximately 2.26 angstroms (Å).

Learn more about X-rays here:

https://brainly.com/question/2833441

#SPJ11

The length of the pendulum is 0.44338 m.

Acceleration due to gravity, g = 9.80 m/s2, Number of oscillations, n = 16, Time taken, t = 7.05 s.

Let l be the length of the pendulum. Now, one complete oscillation means when the pendulum starts from its extreme position (i.e., extreme position A), moves to the other extreme position (i.e., extreme position B), and returns back to position A.

Let’s calculate the time taken by the pendulum to complete one oscillation, i.e., the time period of the pendulum.t1 = time taken for 1 oscillation.

t1 = t/n = 7.05/16.0=0.44125 s

Now, the time period is given by, T=2π √(l/g) Where T is the time period of the pendulum. π = 3.1415 (approx)

Putting the given values of g and T in the above equation,

T = 2π √(l/g) = 2 x 3.1415 √(l/9.80)

Now, substituting T1 in the above equation, we get:

0.44125 = 2 x 3.1415 √(l/9.80)√(l/9.80)

= 0.44125/(2π)

= 0.07010049l

= (√(0.07010049 × 9.80))2l = 0.44338 m

To know more about pendulum visit:

https://brainly.com/question/29268528

#SPJ11

(a) The rotational speed of the Earth, in rotations per minute (rpm), is approximately 0.042 rpm. (b) The rotational speed of the Earth can also be expressed as approximately 2.5 degrees per minute.

To calculate the rotational speed, we need to convert the given time of 24 hours into minutes. There are 60 minutes in an hour, so multiplying 24 hours by 60 minutes gives us 1,440 minutes. The Earth completes one rotation in this time. Therefore, the rotational speed is calculated by dividing 1 rotation by 1,440 minutes, resulting in approximately 0.000694 rotations per minute. To convert this value to rpm, we multiply it by 60 to get approximately 0.042 rpm.

Since the Earth completes one rotation in 24 hours or 1,440 minutes, we can calculate the angular displacement per minute. Dividing a full rotation of 360 degrees by 1,440 minutes gives us approximately 0.25 degrees per minute. Therefore, the Earth's rotational speed can be stated as approximately 2.5 degrees per minute.

learn more about "rotations ":- https://brainly.com/question/26249005

#SPJ11

Answer:

3433.4m

Explanation:

Volume_submerged = (Density_mantle / Density_mountain) * Volume_exposed

Volume_submerged_meters = Volume_submerged / 1000000

Weight_submerged = Density_mantle * Volume_submerged_meters * g

Weight_submerged = Weight_exposed

Density_mantle * Volume_submerged_meters * g = Density_mountain * Volume_exposed * g

Volume_submerged_meters = (Density_mountain / Density_mantle) * Volume_exposed

Volume_submerged_meters = (3.2 g/cm^3 / 4.1 g/cm^3) * 4400 meters

Volume_submerged_meters = (0.7805) * 4400 meters

Therefore, the total height of the mountain is 3433.4 meters.

Mark me brainliest!

Explanation of how to solve a problem using the method of substitution. Please provide the problem that you need help with so that I can provide a detailed explanation.

Here is the general process for solving a problem using the method of substitution.

Step 1: Identify the function that can be expressed in terms of the other function.

Step 2: Express one of the variables in terms of the other by rearranging the equation.

Step 3: Substitute the expression for the variable in terms of the other variable into the other equation.

Step 4: Simplify the equation by combining like terms and solve for the remaining variable.

Step 5: Use the value of one of the variables to find the value of the other variable.

Learn more about variables here ;

https://brainly.com/question/15078630

#SPJ11

Two light rays are incident from air into an unknown liquid at the same point. If θ=25degree and β=37degree. The angle of refraction is 143°.

To find the angle of refraction (a) given the incident angle (β) and the refractive index of the unknown liquid, we can use Snell's Law:

n₁ * sin(β) = n₂ * sin(a)

where:

n₁ is the refractive index of air (approximately 1.00),

n₂ is the refractive index of the unknown liquid, and

β and a are the incident and refracted angles, respectively.

Given that β = 37° and θ = 25°, we can substitute these values into Snell's Law:

n₁ * sin(37°) = n₂ * sin(a)

Since the incident angle θ and the refracted angle a are related by the equation θ + a = 180° (or π radians), we can also write:

sin(θ) = sin(180° - a)

Now we can solve these equations simultaneously to find the angle of refraction a.

sin(37°) = sin(180° - a)

Taking the inverse sine of both sides:

37° = 180° - a

a = 180° - 37°

a = 143°

Therefore, the angle of refraction is 143°.

To learn more about refractive index visit: https://brainly.com/question/83184

#SPJ11

When the center of gravity (CG) of an aircraft is moved from the aft limit to beyond the forward limit, it will affect the cruising and stalling speed as follow

When the center of gravity (CG) is moved from the aft limit to beyond the forward limit, the aircraft will become more unstable. The weight of the aircraft is mostly at the forward end and the tail portion becomes lighter. As a result, it will cause the aircraft to pitch down and result in difficulty in controlling the airplane.  

                          This shift in CG to the forward limit will decrease the cruising speed of the aircraft as it requires more power to maintain the required altitude and speed. Also, the stalling speed of the aircraft will be lower, which means that the aircraft will stall at a lower speed.

                                 This is because the forward limit shifts the neutral point behind the center of gravity, making the aircraft more unstable and reducing the speed at which the airplane stalls. As the CG shifts forward, the margin between the stall speed and the maximum operating speed reduces, making it more difficult to recover from a stall.

Learn more about center of gravity (CG)

brainly.com/question/27182554

#SPJ11

A 750 g ball moving at 15 m/s will have the least momentum.

The momentum can be defined as the product of mass and velocity. It is a vector quantity that shows how difficult it is

to stop a moving object. The momentum of an object depends on two factors, mass and velocity. The least momentum

will have the object with the least mass and velocity. Therefore, a 750 g ball moving at 15 m/s will have the least

momentum. The momentum can be calculated as follows: p = m × v where, p is momentum, m is mass and v is

velocity. We have given that; a 2 kg ball moving at 8 m/s, p = 2 kg × 8 m/s = 16 kgm/s .A 750 g ball moving at 15 m/s, p =

0.75 kg × 15 m/s = 11.25 kgm/s. A 80 kg ball moving at 25m/s, p = 80 kg × 25 m/s = 2000 kgm/s .A 12 kg ball moving at

1 m/s, p = 12 kg × 1 m/s = 12 kgm/s. The momentum of the 750 g ball moving at 15 m/s is 11.25 kgm/s. Therefore, the

least momentum will be for a 750 g ball moving at 15 m/s.

Learn more about momentum:https://brainly.com/question/30337879

#SPJ11