The angle of minimum deviation for parallel beam of light passing through the prism is 20°.
Apex angle of the prism, A = 72°
Refractive index of the glass prism, μ₁ = 1.66
Refractive index of the liquid, μ₂ = 1.33
μ = μ₁/μ₂
μ = 1.66/1.33
μ = 1.24
The expression for the prism formula is given by,
μ = sin[(A + D)/2]/sin(A/2)
1.24 = sin[(72 + D)/2]/sin(72/2)
1.24 = sin[(A + D)/2]/sin36
1.24 = sin[(A + D)/2]/0.58
So,
sin[(A + D)/2] = 1.24 x 0.58
sin[(A + D)/2] = 0.7192
(A + D)/2 = sin⁻¹(0.7192)
(A + D)/2 = 45.99°
A + D = 45.99 x 2 = 91.98
Therefore, the angle of minimum deviation for parallel beam of light passing through the prism is,
D = 91.98 - A
D = 91.98 - 72
D = 19.98 ≈ 20°
To learn more about angle of minimum deviation, click:
https://brainly.com/question/32435533
#SPJ1
When a charged capacitor is disconnected from a battery and the area of the plates is decreasing; describe what is happening to the electric field in the capacitor and explain why.
When a charged capacitor is disconnected from a battery and the area of the plates is decreasing, the electric field in the capacitor is increasing.
This can be explained by considering the relationship between the electric field, the charge on the plates, and the area of the plates.The electric field in a capacitor is given by the formula E = Q / (ε₀A), where E represents the electric field, Q is the charge on the plates, ε₀ is the permittivity of free space, and A is the area of the plates. When the capacitor is disconnected from the battery, the charge on the plates remains constant. However, as the area of the plates decreases, the denominator in the formula for the electric field (ε₀A) decreases. Since the charge remains the same, this reduction in the denominator results in an increase in the electric field E.
In simpler terms, the electric field in a capacitor is inversely proportional to the area of the plates. As the area decreases, the electric field strengthens. This occurs because the same amount of charge is now concentrated on a smaller surface area, leading to a higher electric field intensity between the plates. Therefore, when a charged capacitor is disconnected from a battery and the area of the plates is decreasing, the electric field in the capacitor increases due to the concentration of charge on a smaller surface area.
Learn more about electric field here:
https://brainly.com/question/30544719
#SPJ11
A girl on a swing may increase the amplitude of the swing's oscillations if she moves her legs at the natural frequency of the swing. This is an example of: ________
A girl on a swing may increase the amplitude of the swing's oscillations if she moves her legs at the natural frequency of the swing. This is an example of: This phenomenon is an example of resonance.
Resonance occurs when an external force is applied to a system at its natural frequency, resulting in a significant increase in the system's amplitude. In the case of the girl on a swing, the natural frequency of the swing is determined by its length and the force of gravity. When the girl moves her legs at the natural frequency of the swing, she applies periodic impulses to the swing, synchronizing her motion with the natural oscillations of the swing. As a result, the amplitude of the swing's oscillations increases. This happens because the energy transferred to the swing with each leg movement is added constructively to the existing oscillations, leading to a cumulative effect. Resonance can be observed in various systems, from musical instruments to bridges, and it is often desirable in specific applications. Understanding the concept of resonance allows us to manipulate and control systems by applying forces at their natural frequencies to achieve desired outcomes.
Learn more about Resonance here:
https://brainly.com/question/15337338
#SPJ11
what is the angular distance (in degrees) from the north celestial pole to the point on the sky called the summer solstice?
The angular distance from the North Celestial Pole to the point on the sky known as the summer solstice is approximately 23.5 degrees.
The summer solstice marks the point in the Earth's orbit around the Sun when the Northern Hemisphere experiences its longest day and shortest night. During this time, the North Pole is tilted towards the Sun at its maximum angle of 23.5 degrees. As a result, the Sun appears to reach its highest point in the sky for observers in the Northern Hemisphere. The North Celestial Pole, also known as the North Star or Polaris, is the point in the sky directly above the Earth's North Pole. It serves as a fixed reference point for celestial navigation. The summer solstice occurs when the Sun's declination reaches its maximum positive value of +23.5 degrees. This angle represents the tilt of the Earth's axis in relation to its orbit around the Sun. Therefore, the angular distance from the North Celestial Pole to the summer solstice point is approximately 23.5 degrees.
Learn more about North Pole here:
https://brainly.com/question/13495177
#SPJ11
A mug 3cm in height is placed 12cm in front of a mirror. An
upright image is 9cm tall is produced. What kind
of mirror is being used? What is the radius of curvature? Draw the
ray diagram.
The mirror being used is a convex mirror.
The radius of curvature cannot be determined without specific values for image distance and object distance.
A ray diagram can be drawn using the rules of reflection for a convex mirror. Based on the given information, we can determine that a concave mirror is being used.
To find the radius of curvature, we can use the mirror formula:
1/f = 1/v - 1/u
Where:
f is the focal length of the mirror
v is the image distance from the mirror
u is the object distance from the mirror
Given that the object distance (u) is -12 cm (negative since it is in front of the mirror) and the image distance (v) is +9 cm (positive since the image is upright), we can substitute these values into the formula:
1/f = 1/9 - 1/-12
Simplifying the equation, we get:
1/f = 4/36 + 3/36
1/f = 7/36
Cross-multiplying, we find:
f = 36/7 cm
Therefore, the radius of curvature of the concave mirror is approximately 5.14 cm (rounded to two decimal places).
To draw the ray diagram, we start by drawing the principal axis (a horizontal line passing through the mirror's center of curvature and the focal point). Then, draw the mirror with its curved surface facing inward. Place an arrow to represent the object at a distance of 12 cm in front of the mirror. Draw three rays: one parallel to the principal axis that reflects through the focal point, one passing through the focal point that reflects parallel to the principal axis, and one passing through the center of curvature that reflects back on itself. The point where these rays intersect is the location of the upright image.
learn more about "concave ":- https://brainly.com/question/29115160
#SPJ11
Write the complete decay equation for the given nuclide in the complete X notation. Refer to the periodic table for values of Z. (a) Write the complete decay equation for 239 Np. (Use B to signify the
The complete decay equation for 239Np is: ^{239}{93}Np -> ^{235}{92}U + ^{4}_{2}He . the superscripts indicate the atomic mass and the subscripts represent the atomic number of the respective nuclides.
The given nuclide is 239Np, where the superscripts represent the atomic mass and the subscripts represent the atomic number. Np stands for neptunium.
The decay process of 239Np involves the emission of an alpha particle, which consists of two protons and two neutrons. An alpha particle is represented by the symbol ^4_2He.
During the decay of 239Np, it transforms into a different nuclide. In this case, it decays into 235U, which is uranium. Uranium has an atomic number of 92, represented by the subscript 92.
Therefore, the complete decay equation for 239Np is:
^{239}{93}Np -> ^{235}{92}U + ^{4}_{2}He
The decay of 239Np results in the formation of 235U and the emission of an alpha particle (^4_2He). The complete decay equation is represented as ^{239}{93}Np -> ^{235}{92}U + ^{4}_{2}He, where the superscripts indicate the atomic mass and the subscripts represent the atomic number of the respective nuclides.
To know more about atomic mass ,visit:
https://brainly.com/question/3187640
#SPJ11
Write your answer as: base^exponent*base^exponent
The exponential form of the given number is (-7)⁴. 6⁵.
Exponent is the term used to describe a way to represent huge numbers using powers. In other words, the exponent describes how many times a number has been multiplied by itself.
A number that appears as a superscript over another number is the exponent. In other words, it means that the base has been elevated to a particular level of power. Other names for the exponent are index and power. mn indicates that m has been multiplied by itself n times if m is a positive number and n is its exponent which can be said as the m raised to n.
The given numbers are,
(-7) . (-7) . (-7) . (-7) . 6. 6 . 6 . 6 . 6
So, 7 is multiplied by itself 4 times and 6 is multiplied by itself 5 times.
Therefore, it can be written in the exponential form as,
(-7)⁴. 6⁵
To learn more about exponential form, click:
https://brainly.com/question/29166310
#SPJ1
A coal seem is located 170 m underground. If the average density of the overlying rocks is 2600 kg/m3, answer the followings:
Hints:
* The vertical stress is calculated as follows: g*depth*density of the overlying rocks (g is ground acceleration and equal to 9.8).
* For part c Excel can be used to quickly reach the answer.
a) The vertical pressure applied on each square meter of the coal seem (the vertical stress).
b) If we extract the coal by room and pillar method by following pattern: 4.3m by 4.3m pillars and the rooms or entries between pillars are 4.7 meters wide on both dimensions. Then, how much would be the vertical stress on the remining coal.
c) There is another coal seam in the same region, but it is located 300 m underground. If the maximum vertical stress bearing capacity of the coal is 20 MPa, then how the rooms and pillars should be designed for the maximum recovery. In other words, how much would be the dimensions of pillars and the entries between them? (consider a 9 m2 grid as part b).
d) What are the other factors that should be taken into account for designing the pillars and can affect their load bearing capacity?
The vertical pressure applied on each square meter of the coal seam can be calculated using the formula g * depth * density. If the coal is extracted using a room and pillar method, the vertical stress on the remaining coal can be determined based on the given dimensions.
a) To calculate the vertical pressure on each square meter of the coal seam, we use the formula: vertical stress = g * depth * density. Given that the depth is 170 m and the density of the overlying rocks is [tex]2600 kg/m^3[/tex], the vertical stress can be calculated as follows: vertical stress = [tex]9.8 m/s^2[/tex] * [tex]170 m * 2600 kg/m^3[/tex]. By performing the calculation, the answer can be obtained.
b) Extracting the coal using the room and pillar method with 4.3 m by 4.3 m pillars and 4.7-meter-wide rooms or entries between the pillars will result in vertical stress on the remaining coal. The vertical stress can be calculated using the same formula as in part A but with the new dimensions provided. Using Excel can simplify the calculation process and provide the answer quickly.
c) Considering another coal seam located 300 m underground with a maximum vertical stress-bearing capacity of 20 MPa, the dimensions of the pillars and entries should be determined for maximum recovery. To calculate the dimensions, we need to consider a [tex]9 m^2[/tex] grid, as mentioned in part b. By using the formula from part b, the vertical stress on the remaining coal can be calculated, and the dimensions can be determined accordingly.
d) When designing the pillars, several factors should be taken into account that can affect their load-bearing capacity. Some of these factors include the geological characteristics of the rock and coal formations, the presence of natural fractures or faults, the stability of the surrounding strata, the stress redistribution during mining, and the potential for roof collapse or pillar failure. Proper consideration and analysis of these factors are crucial to ensure the safe and efficient design of pillars in underground mining operations.
Learn more about density here:
https://brainly.com/question/952755
#SPJ11
Which particle referenced on table o besides gamma ray cannot be accelerated by a particle accelerator?
Gamma rays are forms of electromagnetic radiation that are produced from the decay of atomic nuclei. These waves have the shortest wavelength and the highest frequency in the electromagnetic spectrum. Gamma rays are highly penetrating and can easily pass through thick layers of material. Gamma rays are also used in various applications like radiotherapy, industrial radiography, nuclear medicine, and radiation sterilization.
Particle accelerators are devices that use electromagnetic fields to accelerate charged particles to high energies. The energy gained by the charged particle is used for various purposes like nuclear research, medical applications, etc. There are several types of particle accelerators, including linear accelerators (linacs), cyclotrons, synchrotrons, etc. The particles that can be accelerated include protons, electrons, and ions, among others. Based on the above information, the particle that is referenced in Table O besides gamma ray, which cannot be accelerated by a particle accelerator, is not provided. Therefore, it is impossible to determine the particle that cannot be accelerated by a particle accelerator from the given data in question.
Learn more about cyclotrons here ;
https://brainly.com/question/14555284
#SPJ11
Light falls on a double slit with slit separation of 2.02 × 10^−6 m, and the first bright fringe is seen at an angle of 16.5° relative to the
central maximum. Find the wavelength of the light.
Answer:
approximately 5.76 × 10^−7 meters, or 576 nanometers
Explanation:
The location of bright fringes in a double slit experiment is given by the formula:
d * sin(θ) = m * λ
where:
d is the slit separation,
θ is the angle at which the fringe occurs,
m is the order of the fringe (m = 0 for the central maximum, m = 1 for the first bright fringe, m = 2 for the second bright fringe, and so on), and
λ is the wavelength of the light.
We're looking for the wavelength of the light, and we're given that d = 2.02 × 10^−6 m, θ = 16.5°, and m = 1 (since we're looking at the first bright fringe).
Rearranging the formula to solve for λ gives us:
λ = d * sin(θ) / m
We need to make sure that we're working in radians, as that's what the trigonometric functions in most programming and calculation tools expect. There are π radians in 180 degrees, so to convert from degrees to radians, we multiply by π/180. This gives us θ = 16.5° * π/180 = 0.2873 radians.
Substituting the given values into the formula gives us:
λ = (2.02 × 10^−6 m) * sin(0.2873) / 1
λ ≈ 5.76 * 10^-7 m
So the wavelength of the light is approximately 5.76 × 10^−7 meters, or 576 nanometers (since 1 m = 10^9 nm).
a 100 a current circulates around a 2.00-mm -diameter superconducting ring. what is the ring's magnetic dipole moment?
The magnetic dipole moment of the superconducting ring is 3.14 × 10⁻⁴Am².
When a current circulates around a superconducting ring with a 2.00-mm diameter, the ring's magnetic dipole moment can be calculated by applying Ampere's Law.
The equation for calculating the magnetic dipole moment is given as:
M = IA
where M is the magnetic dipole moment of the ring, I is the current flowing through the ring and A is the area of the ring.
Since the ring is superconducting, it implies that there is no resistance to the flow of current. Therefore, the current is said to flow without any dissipation or energy loss. The question states that a current of 100 A circulates around the ring. Therefore, the current value that is given is the current flowing through the ring.
The area of the ring can be calculated by applying the formula for the area of a circle:
A = πr²
where A is the area of the circle, and r is the radius of the circle. Since the diameter of the ring is 2.00 mm, it implies that the radius of the ring is
1.00 mm=1.00×10⁻³m
The area of the ring is given as:
A = πr²A = π(1.00 × 10⁻³)²A = 3.14 × 10⁻⁶m²
Substituting the given values into the formula for calculating the magnetic dipole moment:
M = IA
where I = 100
A = 3.14 × 10⁻⁶m²M = (100 A) (3.14 × 10⁻⁶m²)M = 3.14 × 10⁻⁴Am².
To know more about Ampere's Law visit:
https://brainly.com/question/32676356
#SPJ11
A toy car of mass 9.5 kg is moving in a circular path (16 m in radius) at a tangential velocity of 15 m/s. What is the centripetal acceleration exerted on the car?
Centripetal acceleration is the acceleration experienced by an object moving in a circular path. It is directed towards the centre of the circle and constantly changes the direction of the object's velocity, keeping it in a curved path.
The mass of the toy car, m = 9.5 kg, Radius of the circular path, r = 16 m, Tangential velocity of the car, v = 15 m/s.
The formula to calculate the centripetal acceleration is given by; Centripetal acceleration, a = v²/r.
The formula for centripetal acceleration can be given as; `a = v²/r`, Here,`v = 15 m/s`and`r = 16 m`.
So, the centripetal acceleration exerted on the car can be calculated as; `a = v²/r``a = (15 m/s)²/16 m``a = 225/16``a = 14.06 m/s²`.
Hence, the centripetal acceleration exerted on the toy car is 14.06 m/s².
Learn more about centripetal acceleration here ;
https://brainly.com/question/29359850
#SPJ11
the kinetic energy of a car is 8 ´ 106 j as it travels along a horizontal road. how much work is required to stop the car in 10 s?
Answer:
required power to stop the car is 8 × 10^5W
Explanation:
Power is the rate at which energy is transferred. You need to transfer 8 million joules of kinetic energy into 8 million joules of heat in the car's brakes in 10 seconds.
Power = Change in Energy/Time
P = E/t = 8 × 10^6 J/10s = 8 × 105W
Answer: required power to stop the car is 8 × 10^5W.
NB*- There is no answer present on brainly for this question so i am unable to upload its answer's any link here.
The work required to stop a car traveling along a horizontal road with a kinetic energy of [tex]8 \times 10^6 J[/tex] in 10 seconds is [tex]4 \times 10^6 J[/tex].
The work done on an object is equal to the change in its kinetic energy. In this case, the car has an initial kinetic energy of [tex]8 \times 10^6 J[/tex]. To stop the car, we need to bring its kinetic energy to zero. This means the work done on the car is equal to its initial kinetic energy. Therefore, the work required to stop the car is [tex]8 \times 10^6 J[/tex].
It is important to note that work is a scalar quantity and can be positive or negative depending on the direction of the force and displacement. In this case, since we are stopping the car, the work done is negative because the force applied opposes the car's motion. However, the magnitude of the work remains the same. Therefore, the work required to stop the car in 10 seconds is [tex]8 \times 10^6 J[/tex], or [tex]4 \times 10^6 J[/tex] in magnitude.
To learn more about kinetic energy refer:
https://brainly.com/question/25959744
#SPJ11
circle the final answers please
Let the angle be the angle that the vector A makes with the +x-axis, measured counterclockwise from that axis. Find the angle for a vector that has the following components. Part A A₂ = 4.00 m, Ay =
The angle that the vector makes with the +x-axis, measured counterclockwise from that axis, for a vector with A₂ = 4.00 m, Ay = -6.00 m is -56.31°.
Given, A₂ = 4.00 m, Ay = -6.00 m.
From the given, we can find the Ax as follows:
Let the angle which vector A makes with the +x-axis be θ.
Hence, tanθ = [tex]A_y/A_x⇒ A_x = A_y/tanθ[/tex]
We have, c[tex]A₂ = 4.00 m, Ay = -6.00 m is -56.31°.[/tex]
So, [tex]A₂ = √(A_x² + A_y²)⇒ 16 = A_x² + 36⇒ A_x = ± √(16 - 36)⇒ A_x = ± √(-20)[/tex]
A_x must be negative as θ is also negative (in the 3rd quadrant)⇒ A_x = -2√5
So, [tex]tanθ = A_y/A_x = -6/(-2√5) = 3/√5[/tex]
We know, tanθ = sinθ/cosθ
Therefore, we can find the value of sinθ and cosθ as follows: sinθ = [tex]A_y/A₂ = -6/10 = -3/5cosθ = A_x/A₂ = (-2√5)/10 = -√5/5[/tex]
Hence, θ = tan⁻¹(3/√5) = 56.31°
Negative sign is used for angle as it is measured in counterclockwise direction from x-axis.
Therefore, the angle that the vector makes with the +x-axis, measured counterclockwise from that axis, for a vector with [tex]A₂ = 4.00 m, Ay = -6.00 m is -56.31°.[/tex]
A quantity or phenomenon with two distinct properties is known as a vector. magnitude and course. The mathematical or geometrical representation of such a quantity is also referred to by this term. In nature, velocity, momentum, force, electromagnetic fields, and weight are all examples of vectors.
Know more about vector, here:
https://brainly.com/question/30958460
#SPJ11
Variations in the resistivity of blood can give valuable clues about changes in various properties of the blood. Suppose a medical device attaches two electrodes into a 1.2-mm-diameter vein at positions 5.5cm apart. What is the blood resistivity if a 9.0 V potential difference causes a 280?A current through the blood in the vein? (omega*m)
Given:
Length of the vein, L = 5.5 cm
Diameter of the vein, d = 1.2 mm = 0.0012 m
Potential difference, V = 9 V
Current flowing through the blood in the vein,
I = 280 µA = 280 × 10⁻⁶A
The electrical resistivity of blood, ρ = ?
We have the formula to find the electrical resistivity of a substance,
ρ = (πd²I)/(4VL) × V/I
Substitute the given values,
ρ = (π × 0.0012² × 280 × 10⁻⁶) / (4 × π × (5.5 × 10⁻²) × (9))= 1.83 × 10⁻⁴ Ωm
Hence, the blood resistivity is 1.83 × 10⁻⁴ Ωm.
learn more about resistivity here
https://brainly.com/question/13735984
#SPJ11
Using Newton's revision of Kepler's third law, calculate the mass (in solar masses) of a star where an Earth-like planet orbits it with a semi-major axis of 2 AU and a period of 1.73 Earth-years. Recall that for an Earth-like planet, its mass is negligible compared to that of the star.
Kepler's third law states that the square of the period of a planet's orbit around the Sun is proportional to the cube of the semi-major axis of its orbit. Newton's revision of Kepler's third law states that the sum of the masses of two objects in orbit around each other is proportional to the cube of the semi-major axis of their orbit and inversely proportional to the square of their orbital period.
Using Newton's revision of Kepler's third law, the mass of a star can be calculated as follows:
1. Convert the semi-major axis of the Earth-like planet's orbit from AU to meters.1 AU = 149,597,870,700 meters2 AU = 2 × 149,597,870,700 meters = 299,195,741,400 meters.
2. Convert the period of the Earth-like planet's orbit from Earth years to seconds.1 year = 31,557,600 seconds1.73 Earth-years = 1.73 × 31,557,600 seconds = 54,592,128 seconds
3. Substitute the values into Newton's revision of Kepler's third law and solve for the mass of the star.(m1 + m2) = (4π²a³)/(G T²), where m1 is the mass of the star, m2 is the mass of the Earth-like planet (which is negligible), a is the semi-major axis of the planet's orbit, T is the period of the planet's orbit, and G is the gravitational constant. G = 6.674 × 10⁻¹¹ N m²/kg²(m1 + 0) = (4π² × 299,195,741,400³)/(6.674 × 10⁻¹¹ × 54,592,128²)(m1 + 0) = 2.476 × 10³⁰ kg.
The mass of the star is 2.476 × 10³⁰ kg, which is approximately 1.24 solar masses since the mass of the Sun is 1.99 × 10³⁰ kg.
Learn more about Kepler's third law here ;
https://brainly.com/question/30404084
#SPJ11
A freight train has a mass of 1.5 x 10^7 kg. If the locomotive can exert a constant pull of 7.5 x 10^5 N, how long does it take to increase the speed of the train from rest to 85 km/h?
The time taken to increase the speed of the train from rest to 85 km/h is 2125/9 s
A freight train has a mass of 1.5 x 107 kg.
If the locomotive can exert a constant pull of 7.5 x 105 N, how long does it take to increase the speed of the train from rest to 85 km/h?
Given, Mass of freight train, m = 1.5 × 107 kg
Locomotive can exert a constant pull, F = 7.5 × 105 N
Initial velocity, u = 0
Final velocity, v = 85 km/h
= 85 × (5/18) m/s
= 425/18 m/s
Time, t = ?
We know that,F = ma
Where,F = 7.5 × 105 N
m = 1.5 × 107 kg∴
a = F/m= 7.5 × 105 / 1.5 × 107
= 5 / 100 m/s²
We know that,
v = u + at⇒ t
= (v - u) / a
= (425/18 - 0) / (5/100)
= (42500/18) / 5
= 2125/9 s
Therefore, the time taken to increase the speed of the train from rest to 85 km/h is 2125/9 s.
Note: The numerical value of g has not been given. If required, the value of acceleration due to gravity g is 9.8 m/s².
To learn more about speed visit;
https://brainly.com/question/17661499
#SPJ11
Constellations that do not set and are always above our horizon are called ________ constellations
Constellations that do not set and are always above our horizon are called circumpolar constellations. A constellation is a cluster of stars that form a recognizable shape or pattern when viewed from Earth. They are named after mythical beings, animals, and inanimate objects.
One of the earliest ways of studying the sky was to group stars into constellations, but today they are mainly used for reference and orientation. The horizon is the line where the sky appears to meet the earth's surface. The celestial sphere is the view of the universe as seen from Earth. The point where the sky and the earth seem to meet is known as the horizon. The horizon is defined as a horizontal plane in astronomy or one that is perpendicular to the local vertical plumb line. It is determined by the observer's height and the height of objects on the surface of the Earth.
Learn more about Constellations here ;
https://brainly.com/question/13048348
#SPJ11
calculate the ideal efficiency of an engine in which fuel is heated to 2100 k and the surrounding air is 200 k. express your answer using two significant figures. group of answer choices 25 % 20 % 90 % 80 % none of these.
The ideal efficiency of an engine can be calculated using the Carnot efficiency formula. Given that the fuel is heated to 2100 K and the ideal efficiency is approximately 80%. Option D is correct.
The ideal efficiency of the engine can be calculated using the Carnot efficiency formula. The answer, expressed with two significant figures
The Carnot efficiency formula is given by:
[tex]Efficiency = 1 - (Tc/Th)[/tex]
where Tc is the temperature of the colder reservoir generator (surrounding air) and Th is the temperature of the hotter reservoir (heated fuel).
Plugging in the values:
Tc = 200 K
Th = 2100 K
Efficiency = 1 - (200/2100) = 1 - 0.0952 ≈ 0.804 ≈ 80%
Therefore, the ideal efficiency of the engine, when the fuel is heated to 2100 K and the surrounding air is 200 K, is approximately 80%. This means that the engine can convert 80% of the heat energy into useful work, with the remaining 20% being lost as waste heat.
Learn more about generator here
https://brainly.com/question/31271736
#SPJ11
The complete question is
calculate the ideal efficiency of an engine in which fuel is heated to 2100 k and the surrounding air is 200 k. express your answer using two significant figures. group of answer choices
A. 25 %
B. 20 %
C. 90 %
D. 80 %
E. none of these.
Answer the following question about planets.
1. What are the two types of planets we find in our solar system? Name the planets in each of
these two types and describe the main differences between the types? [5 marks]
2. Name two of the other types of planets we see orbiting other stars? [2 marks]
3. Name 3 other types of, non-planet, objects in our solar system and for each one explain
why they are not planets [3 marks]
1. The two types of planets we find in our solar system are terrestrial planets and gas giant planets.
a) Terrestrial Planets:
MercuryVenusEarthMarsb) Gas Giant Planets:
JupiterSaturnUranusNeptune2. Two types of planets orbiting other stars are:
Super-EarthsHot Jupiters3. Three other types of non-planet objects in our solar system are:
Dwarf PlanetsAsteroidsCometslowing information to answer Numerical Response question 10. Nuclear fusion within the sun emits a radiation that is the primary energy used during photosynthesis, providing food for all life on Earth. Fusion Reaction in the Sun H+H-Y+He Numerical Response 10. To balance the equation above, the values of a, b, c, and d are d 7. Which of the following sequences of energy conversions is used in a wind energ! power plant? A. Chemical potential -> kinetic electrical B. Solar →→ kinetic → electrical -> - electrical - C. Gravitational potential → kinetic → - electrical D. Nuclear →→→ kinetic - The CANDU reactor uses ai reaction to provide energy. In this type of reac The statement above is completed correctly by the information in row Row i ii fusion nuclei are joined together A. B. fusion nuclei are split apart C. fission nuclei are joined together nuclei are split apart D. fission Energy and GDP in Various Countries Energy Use (EJ) GDP (Trillions of US$) Kenya 0.200 0.010 Sweden 2.22 0.300 Bangladesh 0.582 0.690 Canada 13.80 0.753 36. Which country in the data will have the lowest energy intensity, measured in EJ/ trillions of US$? A. Kenya B. Sweden C. Bangladesh D. Canada Country
Numerical Response 10. To balance the equation above, the values of a, b, c, and d are d = 7. The balanced nuclear fusion reaction within the sun is shown as follows:
H + H ⟶ He + γ.
However, the nuclear fusion process within the sun emits a radiation that is the primary energy used during photosynthesis, providing food for all life on Earth. Photosynthesis requires energy to form glucose from carbon dioxide and water.
The energy is received by the plants from sunlight, and it is transformed into chemical energy, which the plants use to make glucose and release oxygen. Therefore, nuclear fusion within the sun is essential for the existence of life on Earth.
7. The following sequence of energy conversions is used in a wind energy power plant - Gravitational potential → kinetic → electrical.
Wind energy is converted into electrical energy in a wind energy power plant. The kinetic energy of the wind causes the rotor blades of a wind turbine to rotate.
The rotor blades are connected to a shaft, which is connected to a generator. The rotation of the rotor blades causes the shaft to rotate and the generator produces electrical energy.
The CANDU reactor uses fusion reaction to provide energy. The statement above is completed correctly by the information in row ii - fusion nuclei are split apart. The CANDU reactor uses uranium as fuel. The uranium nuclei are split apart in a process called fission. During fission, a large amount of energy is released in the form of heat, which is used to produce steam. The steam drives the turbines, which produce electrical energy. Hence, the statement above is completed correctly by the information in row ii - fusion nuclei are split apart.
The country that will have the lowest energy intensity, measured in EJ/trillions of US$ is Sweden. The energy intensity is defined as the amount of energy used per unit of GDP. The energy intensity is calculated as the ratio of energy use (in EJ) to GDP (in trillions of US$).Sweden has an energy intensity of 7.4 EJ/trillion US$.
Know more about nuclear fusion, here:
https://brainly.com/question/14019172
#SPJ11
A
compass used in drafting for drawing perfect circles has two legs
that are each 100 cm long if you want to separate its legs by 15 cm
what is the angle of separation between its legs to the nearest
To get the angle of separation between the legs of a compass used in drafting, we can make use of trigonometry concepts. Let x be the angle of separation between the legs of a compass. Also, note that the legs are each 100 cm long. Then, we have: tan x = (1/2)(15/100)tan x = 0.075x ≈ tan⁻¹ (0.075) ≈ 4.304 degrees
Therefore, the angle of separation between the legs of the compass used in drafting for drawing perfect circles to the nearest degree is 4 degrees.
Geometry is the part of arithmetic worried about unambiguous elements of points and their application to computations. In trigonometry, there are six common functions for angles. Their names and shortened forms are sine (sin), cosine (cos), digression (tan), cotangent (bed), secant (sec), and cosecant (csc).
Know more about trigonometry concepts:
https://brainly.com/question/29288734
#SPJ11
The magnetic field at the center of a circular path in the plane of the paper produced by a proton rotating counterclockwise points to:
a. to the page
b. leaving the page
c. toward the left
d. to the
The correct option for the magnetic field at the center of a circular path in the plane of the paper produced by a proton rotating counterclockwise points to is towards the left.
Magnetic field of a current-carrying wire Right-hand grip rule can be applied to determine the direction of magnetic field about a current-carrying wire. It states that if we hold the wire in our right hand such that the thumb points towards the direction of current then the direction of fingers gives the direction of magnetic field. The same rule can be applied to determine the direction of magnetic field due to a moving charge. In case of a proton, when it rotates counterclockwise (anti-clockwise), it creates a magnetic field around itself. The direction of magnetic field can be determined using the right-hand grip rule which states that when we hold the wire in our right hand such that the thumb points towards the direction of motion of charges (in this case, the direction of rotation of proton), the direction of fingers curled around the wire gives the direction of magnetic field. Since in the given case, proton rotates counterclockwise, the direction of magnetic field due to it will be towards the left. Therefore, option c is correct.
Learn more about current:https://brainly.com/question/1100341
#SPJ11
please help with how to set up the question. thanks
3. A plane is traveling horizontally at velocity v at an altitude of h. The pilot opens the window and tries to take a selfie, but drops their phone. (a) How long does it take phone to fall and hit th
(a) The time it takes for the phone to fall and hit the ground is given by[tex]t = \sqrt{2h/g}[/tex]. It can be calculated using the laws of motion and assuming negligible air resistance.
(b) The distance from the point of dropping to where the phone lands is given by d = vt, where v is the horizontal velocity of the plane.
(a) Using the principles of motion and the assumption that there is no air resistance, it is possible to determine how long it takes the phone to fall and hit the ground. While the plane continues to fly horizontally, the phone will fall vertically owing to gravity. The duration of the phone's descent is equal to the duration of an object falling vertically from the same height. The formula [tex]t = \sqrt{2h/g}[/tex], where t is the time, h is the altitude, and g is the acceleration brought on by gravity, can be used to determine this.
(b) The horizontal velocity of the plane can be used to calculate the distance between the location where the pilot dropped the phone and where it landed. The phone will continue to move horizontally at the same speed as the plane because it is unaffected by the plane's horizontal motion. The formula d = vt, where d is the distance, v is the plane's horizontal velocity, and t is the previously determined time, can be used to determine how far the phone moves horizontally.
To know more about laws of motion here https://brainly.com/question/28171613
#SPJ4
The given question is incomplete, complete question is-"A plane is traveling horizontally at velocity v at an altitude of h. The pilot opens the window and tries to take a selfie, but drops their phone.
(a) How long does it take phone to fall and hit the ground?
(b) How far from the point at which the pilot dropped the phone will the phone land?"
Question) A car travels for 27 minutes at 44km/hr northwards, and then for 31 minutes at 53km/hr in a westerly. direction. Answer this question with the correct number of significant figures. For this
The total distance covered by the car is 43 km. The final answer is rounded to two significant figures to align with the given data's level of precision.
To calculate the total distance covered by the car, we need to consider the distance traveled in each direction and then calculate the resultant displacement using vector addition.
Distance traveled northwards:
Speed = 44 km/hr
Time = 27 minutes
= 27/60 hours (converted to hours)
Distance = Speed * Time
= 44 km/hr * (27/60) hr
= 19.8 km
Distance traveled westwards:
Speed = 53 km/hr
Time = 31 minutes
= 31/60 hours (converted to hours)
Distance = Speed * Time
= 53 km/hr * (31/60) hr
= 27.42 km
To calculate the resultant displacement, we can use the Pythagorean theorem as the two displacements (northwards and westwards) form a right triangle.
Resultant Displacement = √[(Distance northwards)^2 + (Distance westwards)^2]
= √[(19.8 km)^2 + (27.42 km)^2]
= √(392.04 km^2 + 752.1764 km^2)
= √1144.2164 km^2
= 33.836 km
However, the result should have the correct number of significant figures based on the given data. Since the time measurements are given to two significant figures, the final answer should also have two significant figures.
Therefore, the total distance covered by the car is 43 km (rounded to two significant figures).
The car travels a total distance of 43 km, considering the distances traveled northwards and westwards. The calculation involves finding the distance traveled in each direction using speed and time and then using vector addition to calculate the resultant displacement. The final answer is rounded to two significant figures to align with the given data's level of precision.
To know more about distance ,visit:
https://brainly.com/question/26550516
#SPJ11
An artillery shell is fired with an initial velocity of 300 m/s at 62.5° above the horizontal. To clear an avalanche, it explodes on a mountainside 43.0 s after firing. What are the x- and y-coordinates of the shell where it explodes, relative to its firing point? X= m m y = Need Help? Read It
Given, Initial velocity of the artillery shell, u = 300 m/s Angle of projection, θ = 62.5°Time taken for the shell to explode after firing, t = 43 s Let, the x and y components of the velocity be Vx and Vy respectively. Then, the velocity vector V is given byV = Vx î + Vy ĵ ... (i)Also, we know that Vy = u sin θ - gt …(ii)Here, g = 9.8 m/s² is the acceleration due to gravity in the downward direction. Using equation (ii), we get Vy = 300 sin 62.5° - 9.8(43) ≈ 159.09 m/s
Thus, the y-component of the velocity is Vy = 159.09 m/s Now, let the horizontal distance travelled by the shell be x. Then, using equation (i), we get Vx = u cos θ …(iii)Using equation (iii), we get Vx = 300 cos 62.5° ≈ 135.56 m/s Thus, the x-component of the velocity is Vx = 135.56 m/s Now, the horizontal distance travelled by the shell can be calculated as follows: x = Vx t = 135.56 × 43 ≈ 5829.08 m ≈ 5.83 km Thus, the shell explodes 5.83 km away from the point of firing along the horizontal direction.
The vertical distance travelled by the shell can be calculated using equation (ii) as follows: y = ut sin θ - (1/2) gt² …(iv)Using equation (iv), we get y = 300 sin 62.5° (43) - (1/2) (9.8) (43)² ≈ 5465.56 m ≈ 5.47 km Thus, the shell explodes 5.47 km above the point of firing along the vertical direction. Hence, the x and y coordinates of the shell where it explodes, relative to its firing point are given by X = 5.83 km Y = 5.47 km.
Know more about initial velocity:
https://brainly.com/question/28395671
#SPJ11
A loop of conducting wire with length l and width w is entering a magnetic field b at velocity v. what direction will the induced current travel in? a. clockwise b. counterclockwise c. up d. down
Lenz's Law, formulated by the Russian physicist Heinrich Lenz in 1834, is a fundamental principle in electromagnetism that describes the direction of an induced current in a conductor in response to a changing magnetic field.
When a loop of conducting wire with length l and width w enters a magnetic field b at velocity v, the induced current will travel in a counterclockwise direction. This is due to Lenz's Law, which states that an induced current in a circuit will always flow in a direction that opposes the change in the magnetic field that caused it. Since the loop is entering the magnetic field, the induced current will flow in such a way as to create a magnetic field that opposes the direction of the original magnetic field, which is counterclockwise.
Learn more about magnetic field here ;
https://brainly.com/question/19542022
#SPJ11
Consider a car speeding up as it drives along a level road. what is an action-reaction pair (from newton’s third law)?
Newton's third law of motion states that for every action, there is an equal and opposite reaction. The action-reaction pair is used to describe the interaction between two objects. Therefore, when a car is speeding up as it drives along a level road, an action-reaction pair occurs.
An action-reaction pair is a pair of forces that are equal in strength and opposite in direction. When an object exerts a force on another object, the second object exerts an equal and opposite force on the first object. The action-reaction pair when a car speeds up as it drives along a level road can be explained as follows: Action force: The car exerts a force on the road in the forward direction. This is the action force. Reaction force: The road exerts a force on the car in the backward direction. This is the reaction force.
Learn more about Newton's third law of motion here ;
https://brainly.com/question/974124
#SPJ11
electrons oscillating with a frequency of 2.0 x 10^10 hertz produce electromamgteic waves. these waves would be classified as
Electromagnetic waves produced by electrons oscillating with a frequency of 2.0 x 10¹⁰ hertz would be classified as radio waves.
Electromagnetic waves are a form of energy that propagate through space in the form of oscillating electric and magnetic fields. These waves are generated by the acceleration or oscillation of charged particles, such as electrons.
The frequency of an electromagnetic wave refers to the number of oscillations or cycles it completes per unit of time. It is usually measured in hertz (Hz), which represents cycles per second. In the given scenario, the electrons are oscillating with a frequency of 2.0 x 10¹⁰ Hz.
Now, let's discuss the classification of electromagnetic waves based on their frequency and wavelength. The electromagnetic spectrum encompasses a wide range of waves, including radio waves, microwaves, infrared waves, visible light, ultraviolet waves, X-rays, and gamma rays.
Radio waves have the longest wavelengths and lowest frequencies among the electromagnetic waves. They typically range from a few centimeters to several kilometers in wavelength. These waves are commonly used for various forms of communication, such as radio and television broadcasting, as well as wireless communication technologies like Wi-Fi and cellular networks.
As the frequency of electromagnetic waves increases, we move through the spectrum, encountering microwaves, infrared waves, visible light, ultraviolet waves, X-rays, and gamma rays in that order. Each segment of the spectrum has distinct properties and applications.
In summary, the electromagnetic waves produced by electrons oscillating with a frequency of 2.0 x 10¹⁰ Hz would be classified as radio waves. These waves have longer wavelengths and lower frequencies compared to other regions of the electromagnetic spectrum and are widely used for communication purposes.
To know more about electromagnetic waves follow the link:
https://brainly.com/question/21106663
#SPJ4
The cathode in a photoelectric effect experiment can be made from potassium or gold featuring a work function of 2.3 eV and 5.1 eV, respectively. For both types of cathode:
1. Find the threshold frequency.
2. Find the threshold wavelength.
3. What is the maximum photoelectron ejection speed given that the light used has a wavelength of 220 nm?
The cathode in a photoelectric effect experiment can be made from potassium or gold featuring a work function of 2.3 eV and 5.1 eV, respectively. For both types of cathode the threshold frequency for gold is approximately 7.738 x 10^14 Hz. the threshold wavelength for gold is approximately 3.87 x 10^-7 meters (or 387 nm).
1. To find the threshold frequency, we can use the equation relating energy (E) to frequency (f) in the photoelectric effect: E = hf, where h is Planck's constant (approximately 6.626 x 10^-34 J·s). The threshold frequency is the minimum frequency required to eject electrons. Since the work function (Φ) is the minimum energy required to remove an electron, we have the equation: Φ = hf_threshold. Rearranging the equation, we get: f_threshold = Φ / h.
For potassium (Φ = 2.3 eV), the threshold frequency is:
f_threshold (potassium) = (2.3 eV) / (6.626 x 10^-34 J·s)
For gold (Φ = 5.1 eV), the threshold frequency is:
f_threshold (gold) = (5.1 eV) / (6.626 x 10^-34 J·s)
The calculation for the threshold frequency of gold is as follows:
(5.1 x 1.6 x 10^-19 J) / (6.626 x 10^-34 J·s) = 7.738 x 10^14 Hz
Therefore, the threshold frequency for gold is approximately 7.738 x 10^14 Hz.
2. To find the threshold wavelength, we can use the equation relating wavelength (λ) to frequency (f) in the electromagnetic spectrum: c = λf, where c is the speed of light (approximately 3.00 x 10^8 m/s). Rearranging the equation, we get: λ = c / f_threshold.
For potassium, the threshold wavelength is:
λ_threshold (potassium) = (3.00 x 10^8 m/s) / f_threshold (potassium)
For gold, the threshold wavelength is:
Using the threshold frequency value of approximately 7.738 x 10^14 Hz for gold, we can calculate the threshold wavelength for gold:
λ_threshold (gold) = (c) / (f_threshold (gold))
= (3.00 x 10^8 m/s) / (7.738 x 10^14 Hz)
Calculating the value:
λ_threshold (gold) ≈ 3.87 x 10^-7 meters
Therefore, the threshold wavelength for gold is approximately 3.87 x 10^-7 meters (or 387 nm).
3. To find the maximum photoelectron ejection speed, we can use the equation: E = (1/2)mv^2, where E is the energy of the ejected electron, m is the mass of the electron, and v is its velocity. The energy of the photon is given by E_photon = hf, where h is Planck's constant and f is the frequency. For a given wavelength (λ), we can calculate the frequency using the equation f = c / λ. Thus, the energy of the photon is E_photon = hc / λ.
Using the energy conservation principle, the maximum photoelectron ejection speed is given by:
(1/2)mv^2 = E_photon - Φ
where Φ is the work function. We can solve for v using the equation:
v = √[(2(E_photon - Φ)) / m]
For a wavelength of 220 nm, we can calculate the energy of the photon using E_photon = hc / λ, and then substitute the values of Φ and m (mass of the electron) to find the maximum photoelectron ejection speed.
Learn more about photoelectric effect here:
https://brainly.com/question/32675270
#SPJ11
what magnetic-field magnitude is required for this transition to be induced by photons with frequency 22.8 mhz m h z ?
The magnetic-field magnitude required for this transition to be induced by photons with frequency 22.8 MHz is 1.60 × 10⁻⁵ T.
The given frequency of the photons is 22.8 MHz.
The magnetic-field magnitude is required for this transition to be induced by these photons.
We know that the energy of a photon is given by the formula
E = h × ν Where h is Planck's constant (6.626 × 10⁻³⁴ J s) and ν is the frequency of the photon.
For an electron to undergo a transition between two energy levels, the energy of the photon must equal the difference in energy between the two levels.
Mathematically, it can be written as:
ΔE = E₂ - E₁= h × (ν₂ - ν₁)
The magnetic-field magnitude that will induce a transition can be calculated using the formula:
ΔE = μB × Δm where μB is the Bohr magneton, and Δm is the difference between the magnetic quantum numbers of the two energy levels.
The formula for the Bohr magneton is:μB = eh/4πmeμB = 9.274 × 10⁻²⁴ J T⁻¹
The difference in magnetic quantum numbers is Δm = 1.
Hence, the formula for the magnetic-field magnitude can be written as:
B = ΔE/μB
Therefore, B = h(ν₂ - ν₁)/μBThe frequency of the photon is 22.8 MHz, which is equal to 22.8 × 10⁶ Hz.
The two energy levels are given as: E₁ = -2.18 × 10⁻¹⁸ J and E₂ = -5.45 × 10⁻¹⁸ J.B = (6.626 × 10⁻³⁴ J s) (22.8 × 10⁶ Hz - 0)/ (9.274 × 10⁻²⁴ J T⁻¹)B = 1.60 × 10⁻⁵ T
Therefore, the magnetic-field magnitude required for this transition to be induced by photons with frequency 22.8 MHz is 1.60 × 10⁻⁵ T.
Learn more about magnetic-field magnitude
brainly.com/question/30640184
#SPJ11