A force of 5.25 newtons acts on an object of a mass 25.5 kilograms. How far is the object from the center of Earth? (The value of G is 6.673 × 10-11 newton meter2/kilogram2. The mass of Earth is 5.98 × 1024 kilograms.)

Answer:

a

Explanation:

Answer:

See below....the question is unclear....pick the answer you think they want

Explanation:

Car goes from 30 m/s    to   24 m/s   in 10 seconds

acceleration = change in velocity/change in time

                     =   -6 m/s   / 10 s   =  - 3/5   m/s^2  

The wording of the question is not very good.....perhaps they meant to say that after the 5 seconds the velocity is now 24 m/s ?

a1 *10   +   a2 *5   = -6 m/s  

            ( 6 m/s is the change in velocity from 30 to 24 m/s)    

    a1/a2 = 1.5    so   a2 = a1/1.5   (substitute this in)

10 a1   + 5 ( a1/1.5)  =-6

15 a1 + 5 a1  = -9

a1 =  - .45 m/s^2

The velocity of the car at the end of the initial ten-second interval, given that the car further slows down for the next five seconds, is 25.5 m/s

From the first statement, we have:

v₁ = u₁ + a₁t₁

v₁ = 30 + (a₁ × 10)

v₁ = 30 + 10a₁ ......(1)

From the second statement, we have:

v₂ = u₂ + a₂t₂

24 = u₂ + (a₂ × 5)

24 = u₂ + 5a₂   .......(2)

But,

u₂ = v₁ = 30 + 10a₁

Thus, we have:

24 = 30 + 10a₁ + 5a₂

But,

a₁/a₂ = 1.5

a₁ = 1.5a₂ ..... (3)

Thus, we have:

24 = 30 + 10a₁ + 5a₂

24 = 30 + 10(1.5a₂) + 5a₂

24 = 30 + 15a₂ + 5a₂

24 = 30 + 20a₂

Collect like terms

24 - 30 = 20a₂

-6 = 20a₂

Divide both sides by 20

a₂ = -6 / 20

= -0.3 m/s²

Substituting the value of a₂ into equation 3, we have

a₁ = 1.5a₂

= 1.5 × -0.3

= -0.45 m/s²

Substitute the value of a₁ into equation 1 to obtain the velocity, v₁ at the end of the initial to 10 s

v₁ = 30 + 10a₁

= 30 + (10 × -0.45)

= 30 - 4.5

= 25.5 m/s

Thus, velocity of the car at the end of the initial ten-second interval is 25.5 m/s

Learn more about velocity:

https://brainly.com/question/21010554

#SPJ2

Answer:

a force of acts on a body of mass 50 kg for 10 sec when the first of acting on the body the body covers 80 and in the next 10 second

Answer:

a = 0.4 ms⁻²

Explanation:

• First calculate the resultant force on the body:

If we consider upwards to be the positive direction and downwards to be the negative direction, then the resultant force will be:

F = +100 + (-80)

  = +20 N

The resultant force is positive, so it will act upwards.

• Next calculate the acceleration:
F = ma

a = F/m

a = 20/ 50

a = 0.4 ms⁻²

As the force is acting upwards, the acceleration will also be upwards.

The stress on the wire is determined as  6.37 x 10⁶ N/m².

The stress on the wire is calculated as follows;

σ = F/A

where;

Let the diameter of the wire = 2 mm

Area = πr²

Area = π(1 x 10⁻³)²

Area = 3.142 x 10⁻⁶ m²

Stress = 20/(3.142 x 10⁻⁶)

Stress = 6.37 x 10⁶ N/m²

Learn more about stress here: https://brainly.com/question/11819849

#SPJ1

Answer:

a = (V2 - V1) / t      equation  for constant acceleration

if t the independent variable is placed on the abcissa or x-axis and V the dependent variable is placed on the ordinate or y-axis then the acceleration would be the slope at the point considered.

The magnitude of the reaction force of the air pushing the balloon would be equal and opposite.

A push or a pull that an object experiences as a result of interacting with another item is known as a  reaction force.

Newton's third law is officially expressed as follows: There is an equal and opposite reaction to every action. The implication of the statement is that there are always two forces acting on the two interacting objects. The force acting on the first object is equal in size to the force acting on the second. The force acting on the first object is acting in the opposite direction to the force acting on the second object. Force pairs—equal and opposing action-reaction force pairs—always exist in pairs.

Knowing that everything has an equal and opposite reaction according to Newton's second law. The preasured air that a balloon had to push out into the free air acts as the reaction force.

To learn more about reaction force refer to:

https://brainly.com/question/14360695

#SPJ10

Answer:

eˣ-8.

Explanation:

(eˣ-8x+7)'=eˣ-8.

The magnitude of the average force exerted on the ball by the wall is 225.469 N.

The change in momentum is equal to the product of impact force applied while colliding and time for that impact.

Impulse F. t = m (Vf -Vi)

where, Vf is the final velocity and Vi is the initial velocity.

Given is a 3.42 kg steel ball strikes a massive wall at 14.3 m/s at an angle of α = 61.5° with respect to the plane of the wall. It bounces off with the same speed and angle. The ball is in contact with the wall for 0.207 s

Substitute the values into the expression, we get

Impulse = 2 x mvcosθ

Impulse= 2 x 3.42 x 14.3 x cos 61.5°

Impulse = 46.672 kg.m/s

The impact force can be written as

F.t = I

Put the given values, we have

F = 46.672 /  0.207

F = 225.469 N

Thus, the magnitude of force exerted by the wall is 225.469 N

Learn more about impulse.

https://brainly.com/question/16980676

#SPJ1

The atomic bomb explosion, depends on the energy released, W, the elapsed time, t, and the air density which altogether lead to the vaporisation of the contents within the mushroom cloud created.

An atomic bomb is type of nuclear weapon that releases a vast amount of energy upon explosion in the form of fission reaction.

During an explosion of atomic bomb, a cloud of mushroom fire is formed which vaporises anything found within it. The extent of destruction depends on:

Therefore, the atomic bomb explosion, depends on the energy released, W, the elapsed time, t, and the air density which altogether lead to the vaporisation of the contents within the mushroom cloud created.

Learn more about nuclear energy here:

https://brainly.com/question/24295936

#SPJ1

Answer:

8.4335 x 10^-²¹, 1.78204 x 10²⁶

Explanation:

p = mv

p = (5.05 x 10⁶)(1.67 x 10^-²⁷)

p = 8.4335 x 10^-²¹

p = mv

p = (5.98 x 10²⁴)(2.98 x 10)

p = 1.78204 x 10²⁶

Answer:

a) 0.2m/s

b) 5m/s

Explanation:

a) acceleration=∆v/∆t

v=10

t=50

10/50=1/5

=0.2m/s

b) time= d/s

d=50m

s=10

50/10

=5m/s

Answer:

See below

Explanation:

Average speed =  (0+ 10)/2 = 5 m/s

  then to cover 50 m     will take    50 m / 5 m/s  = 10 seconds

      change in velocity/ change in time = acceleration = 10/10 = 1 m/s^2

[tex]q = -21 * 10^{-6} C[/tex]

The acceleration is constant and equal to the gravitational acceleration g which is 9.8 m/s at sea level on the Earth.

As we know that charge and its sign that remains in equilibrium is under gravity must be such that it will balance the gravitational force by electric force,

mg =qE

[tex]1.45 * 10^{-3}(9.80)=q(600)\\\\q = 21 *10^{6} C\\\\[/tex]

and its sign must be negative so that it will have upward electric force

so it is

[tex]q = -21 * 10^{-6} C[/tex]

The charge of a particle of mass is [tex]-21 * 10^{-6} C[/tex]

Learn more about Free-fall acceleration: https://brainly.com/question/2165771

#SPJ1

Answer:

Explanation:

missing info .....

According to the pavlovian perspective, people who suffer from PTSD are classically conditioned.

This is referred to as post traumatic stress disorder which is a mental disorder from a terrifying incident.

The pavlovian perspective however view this disorder as being a type of classical conditioned one.

Read more about Post traumatic stress disorder here https://brainly.com/question/943079

#SPJ1

Answer:

Approximately [tex]9.39 \; {\rm m\cdot s^{-1}}[/tex] after the sphere has travelled a distance of [tex]5\; {\rm m}[/tex].

Approximately [tex]16.3\; {\rm m\cdot s^{-1}}[/tex] right before touching the ground (a distance of [tex]15\; {\rm m}[/tex].)

Assumption: [tex]g = 9.81\; {\rm N\cdot kg^{-1}}[/tex].

Explanation:

Weight of the sphere: [tex]m\, g = 9.81\; {\rm N \cdot kg^{-1}} \times 10\; {\rm kg} = 98.1\; {\rm N}[/tex], downwards.

Drag on the sphere: [tex]10.0\; {\rm N}[/tex] upwards.

Net force on the sphere: [tex]98.1\; {\rm N} - 10\; {\rm N} = 88.1\; {\rm N}[/tex] downwards.

Acceleration of the sphere: [tex]a = F_\text{net} / m = 88.1\; {\rm N} / (10\; {\rm kg}) = 8.81\; {\rm m\cdot s^{-2}}[/tex].

Apply the SUVAT equation [tex]v^{2} - u^{2} = 2\, a\, x[/tex], where [tex]v[/tex] is the final velocity, [tex]u[/tex] is the initial velocity ([tex]0[/tex] in this case, as the sphere was released from rest,) and [tex]x[/tex] is the distance (displacement) that the sphere has travelled so far.

Rearrange this equation to obtain an expression for [tex]v[/tex]:

[tex]\displaystyle v = \sqrt{2\, a\, x + u^{2}}[/tex].

For example, after the ball travelled a distance of [tex]5.00\; {\rm m}[/tex], [tex]x = 5.00 \; {\rm m}[/tex]:

[tex]\begin{aligned} v &= \sqrt{2\, a\, x + u^{2}} \\ &= \sqrt{2 \times 8.81\; {\rm m\cdot s^{-2}} \times 5.0\; {\rm m} + 0} \\ &\approx 9.39\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

Similarly, [tex]x = 15.0\; {\rm m}[/tex] right before landing, such that:

[tex]\begin{aligned} v &= \sqrt{2\, a\, x + u^{2}} \\ &= \sqrt{2 \times 8.81\; {\rm m\cdot s^{-2}} \times 15.0\; {\rm m} + 0} \\ &\approx 16.3\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

Answer:

Approximately [tex]3.14\; {\rm rad \cdot s^{-1}}[/tex].

Explanation:

Fact: the angular velocity [tex]\omega[/tex] of a simple harmonic oscillator is the ratio between the maximum velocity [tex]v_{\text{max}}[/tex] and the maximum displacement [tex]x_\text{max}[/tex] of this oscillator. In other words:

[tex]\begin{aligned} \omega &= \frac{v_{\text{max}}}{x_{\text{max}}}\end{aligned}[/tex].

Derivation of the previous equation:

Let [tex]A[/tex] denote the amplitude of this oscillation, and let [tex]\omega[/tex] denote the angular velocity.

The displacement of the oscillator at time [tex]t[/tex] would be:

[tex]x(t) = A\, \sin(\omega\, t)[/tex].

The maximum displacement of this oscillator would be [tex]x_\text{max} = A[/tex].

The velocity of this oscillator at time [tex]t[/tex] is the derivative of displacement with respect to time:

[tex]\begin{aligned} v(t) &= \frac{d}{d t}\, [x(t)] \\ &= \frac{d}{d t} [A\, \sin(\omega\, t)] \\ &= A\, \omega\, \cos(\omega\, t)\end{aligned}[/tex].

The maximum velocity of this oscillator would be [tex]v_\text{max} = A\, \omega[/tex].

Notice that dividing [tex]v_\text{max} = A\, \omega[/tex] by [tex]x_\text{max} = A[/tex] would give:

[tex]\displaystyle \frac{v_\text{max}}{x_\text{max}} = \frac{A\, \omega}{A} = \omega[/tex].

It is given that [tex]v_\text{max} = 2.76\; {\rm m\cdot s^{-1}}[/tex] while [tex]x_\text{max} = 0.0880\; {\rm m}[/tex]. Therefore:

[tex]\begin{aligned} \omega &= \frac{v_{\text{max}}}{x_{\text{max}}} \\ &= \frac{2.76\; {\rm m\cdot s^{-1}}}{0.0880\; {\rm m}} \\ &\approx 3.14\; {\rm s^{-1}}\end{aligned}[/tex].

(Radians per second.)

Answer:

V = 6.53 × 10^14

h = 6.626 × 10^-34

E = hV

E = (6.626 × 10^-34) (6.53 × 10^14)

E = 4.33 × 10^-19

The amount of time it will take to have 125 grams of erbium-165 left

in the sample is; C: 31.2 hours

The formula for amount of substance after decay is;

N(t) = N₀(¹/₂)^(t/t_¹/₂)

We are given;

Half life; t_¹/₂ = 10.4 hours

Initial amount; N₀ = 1000 g

Amount left; N(t) = 125 g

Thus;

125 = 1000 * (¹/₂)^(t/10.4)

125/1000 = (¹/₂)^(t/10.4)

In 0.125 = (t/10.4) In 0.5

-2.08 = -0.693(t/10.4)

t/10.4 = -2.08/-0.693

t = 10.4 * 3

t = 31.2 hours

Read more about decay time at; https://brainly.com/question/11117468

#SPJ1

(a) The kind of frictional force acts on the ring upon contact with the surface is kinetic friction before rolling and afterwards it is static friction.

(b) If the ring begins to roll smoothly to the right with speed v = 10 m/s after 5 seconds of contact (the After state), the coefficient of friction corresponding to the frictional force is 0.612

(c) The increase in the thermal energy of the ring/surface system from right before the ring contacts the surface, to when the ring starts to roll smoothly is 7500 J.

(d) The horizontal distance, from the end of the ramp, at which the ring lands is 7.78 m

When an object is moving on a rough surface, it experiences opposition. This opposing force is called the friction force.

Given is a uniform solid ring of mass M = 10 kg and radius R = 2 m is initially rotating in mid-air with angular speed 20 rad/s [the Before state in figure (I) below]. It is then placed in contact with a surface (assume that the surface immediately feels the full weight of the ring).

(a) The kind of frictional force acts on the ring upon contact with the surface is kinetic friction before rolling and afterwards it is static friction.

(b) angular frequency = velocity / radius

ωf = 10/2 = 5 rad/s and ωi = 20 rad/s

Angular acceleration, α = ωf - ωi /t

Put the values, we get

α = -15/5 = -3 rad/s²

Coefficient of friction, μ = a/g = rα/g

Plug the values, we get

μ = 0.612

Thus, the coefficient of friction corresponding to the frictional force is 0.612.

(c) The energy lost = heat generated

 energy lost = 1/2 Iω² + 1/2 Mv²

 energy lost = 1/2 MR²ω² + 1/2 Mv²

Plug the values, we get

 energy lost = 7500 J

Thus, the  increase in the thermal energy is 7500 J.

(d) The horizontal distance, from the end of the ramp, at which the ring lands

s= (v- 2gH) sin2θ /g

s = (10 - 2x (-9.81)x5 ) sin (2x π/6) / 9.81

s = 7.78m

Thus, the horizontal distance is  7.78 m

Learn more about friction force.

https://brainly.com/question/1714663

#SPJ1

d. is wrong...the temperature cannot be measured due to physical changes

(a) Let [tex]v[/tex] be the maximum linear speed with which the ball can move in a circle without breaking the cord. Its centripetal/radial acceleration has magnitude

[tex]a_{\rm rad} = \dfrac{v^2}R[/tex]

where [tex]R[/tex] is the radius of the circle.

The tension in the cord is what makes the ball move in its plane. By Newton's second law, the maximum net force on it is

[tex]F = (1.500\,\mathrm{kg}) a_{\rm rad}[/tex]

so that

[tex](1.500\,\mathrm{kg}) \dfrac{v^2}{1.50\,\rm m} = 64.0\,\mathrm N[/tex]

Solve for [tex]v[/tex] :

[tex]v^2 = \dfrac{(64.0\,\mathrm N)(1.50\,\mathrm m)}{1.500\,\rm kg} \\\\ \implies \boxed{v = 8.00 \dfrac{\rm m}{\rm s}}[/tex]

(b) The net force equation in part (a) leads us to the relation

[tex]F = \dfrac{mv^2}R \implies v = \sqrt{\dfrac{FR}m}[/tex]

so that [tex]v[/tex] is directly proportional to the square root of [tex]R[/tex]. As the radius [tex]R[/tex] increases, the maximum linear speed [tex]v[/tex] will also increase, so the cord is less likely to break if we keep up the same speed.

We will use the design process to meet the requirements of the competition by the given explained in the main answer.

The initiative was taken by two or more parties operating independently to win the business of a third party by competing to hire contractors on the best terms possible.

The complete question is

"A local businessperson placed an advert in the local newspaper for a competition for girls only from different schools to participate in the competition. The competition is about drawing ideas for a shopping complex for the local community. Girls from the different schools are excited about the competition. you are a group of boys in the local schools who saw the advert and feel it is unfair for you to be excluded from the competition.

consider yourself as one of the learners in the local schools.

Explain why the project should be given to boys also who have better skills for this project than the girls do.

1.2 think about the design process skills, investigates, design, make, evaluate and communicate."

Explain how you will use the design process to meet the requirements of the competition.

[ 1.1 ]Boys should also be given the project because some of them have more artistic talent than girls do when it comes to sketching designs for local shopping centers.

Boys can also present a clear picture of how local communities can expand their shopping options.

For instance, they can encourage local merchants to offer seasonal items because doing so will benefit their businesses.

They can also suggest that retailers encourage customers to bring a friend to participate in competitions, which will be highly regarded.

[1.2] In order to fulfill the needs of the competition, I would make sure to explore how a shopping center for the neighborhood functions, for instance, by making sure I am aware of the strategies one may use to enhance his or her firm in the neighborhood.

In order to win the competition, I would make sure that I was confident in what I was saying and that I was audible enough to be heard during the competition.

Finally, I would make sure I met the competition's conditions by staying on-topic and solely addressing the issues raised in the advertisement

Hence will use the design process to meet the requirements of the competition.

To learn more about the competition refer;

https://brainly.com/question/13686157

#SPJ1

Answer:

D. s=3x+4y

Explanation:

The line is at the 3rd column in the 4th row.

The speed at which the medicine leaves the needle is  2.462 m/s

When an incompressible, ideal fluid is flowing through a tube or pipe, the total energy remains constant.

p₁ /ρg + v₁²/2g +z₁ = p₂ /ρg + v₂²/2g +z₂

Where, p/ρg = pressure energy

            v²/2g = kinetic energy

                   z = potential energy

Given is during an injection, pressure in the barrel of syringe is 1.03  atm while pressure in the needle section is 1.00 atm. Assuming the syringe lays horizontally and mass density of the liquid medicine ρ =1000 kg/m³.

The fluid is initially at rest.

Using the Bernoulli's equation, we have

v₁² -  v₂²= 2 x (p₂ -p₁) / ρ

Substituting the values, we get

0 -  v₂² = 2 x (1.00 -1.03) x 1.01 x 10⁵ /1000

v₂² = 6.06

v₂ = 2.462 m/s

Thus, the speed at which the medicine leaves the needle is 2.462 m/s

Learn more about Bernoulli's theorem

https://brainly.com/question/24232842

#SPJ1

Statement B  is true about the energy level of gas, Gases have more energy than liquids and solids.

A gas is a sample of matter that adopts the shape of the container in which it is housed and develops a uniform density inside the container.

Liquid molecules are more energetic than solid molecules. Further heating will cause the molecules to move so quickly that they won't stick together at all. The gas molecules have the highest energy content.

Gases have more energy than liquids and solids.

Hence statement B  is true about the energy level of gas.

To learn more about the gas refer;

https://brainly.com/question/3637358

#SPJ1

The initial velocity of the arrow and the height of the building will be 29.05 m/s² and 781 m respectively.

The change of distance with respect to time is defined as speed. Speed is a scalar quantity. It is a time-based component. Its unit is m/sec.

The given data in the problem is;

u is the initial velocity of fall = ?  m/sec

h is the distance of fall = 200 m

g is the acceleration of free fall = 9.81 m/sec²

H is the height of the building

t is the time period = 10 second

According to Newton's second equation of motion,

[tex]\rm h= ut+\frac{1}{2} gt^2 \\\\\ h-\frac{1}{2} gt^2 =ut \\\\ 200 - 0.5 \times(9.81) \times 10^2 = 10 u \\\\ u = - 29.05 \ m/sec[/tex]

- ve shows the direction is downward.The magnitude of the initial velocity is found as;

u = 29.05 m/sec

The height of the building

[tex]\rm H= ut+\frac{1}{2} gt^2 \\\\\ H = 29.05 \times 10 + 0.5 \times 9.81 \times 10^2 \\\\ H = 781 \ m[/tex]

Hence the initial velocity of the arrow and the height of the building will be 29.05 m/s² and 781 m respectively.

To learn more about the velocity, refer to the link: https://brainly.com/question/862972

SPJ1

Answer:

Since 1 cal = 4.19 J     the heat Q received by the metal is

Q = 13,500 J * 1 C / 4.19 J = 3,222 calories

S = ΔQ / (ΔT * ΔM)  = 3222 cal / (45 deg C / 750 gm)

S = .095 cal / gm deg C

Note that specific heat capacity for Cu is .093 cal / gm deg C

If the displacement is tripled then the spring force also is tripled.

The amount of force required to stretch or compress the spring is known as the spring force. Its unit is Newton(N).

Froom the hooks law;

F = kx

Where,

F is the applied force

x is the displacement in case 1

Case 2;

x'=3x

F'=kx'

F'=3KX

F'=3x'

Where,

x' is the displacement when the force is tripled

F' is the force in the case2

Hence, if the displacement is tripled then the spring force also be tripled.

To learn more about Hooke's law refer;

https://brainly.com/question/13348278

#SPJ1

Answer:

a (2m)

Explanation:

according to wavelenght = speed / frequency,

the wavelength is 2 m