A downward force of magnitude 5 n is exerted on the book by the force of.

Answer:

the answer is C

Explanation:

i did this

Answer:

1/2

Explanation:

Europa = 3.5 days

Ganymede = 7.1 days

E/U = 3.5 / 7.1 ~~   1/2

Answer:

B. Use oxygen to convert a fuel to heat and light energy.

What is combustion?

Combustion is a chemical process in which a substance reacts rapidly with oxygen and gives off heat. The original substance is called the fuel, and the source of oxygen is called the oxidizer.

The fuel can be a solid, liquid, or gas, although for airplane propulsion the fuel is usually a liquid.

For example, charcoal is combining with oxygen.

Combustion is commonly called burning, and the substance that burns is usually referred to as fuel.

To summarize,

For combustion to occur three things must be present:

As a result of combustion, exhausts are created and heat is released. You can control or stop the combustion process by controlling the amount of the fuel available, the amount of oxygen available, or the source of heat.

Therefore,

Combustion is when you use oxygen to convert a fuel to heat and light energy.

Learn more information about Combustion: https://brainly.com/question/15117038

#SPJ1

Answer:

1,800kg

Explanation:

Force = Mass x Acceleration

F = m x a

15840N = m x 8.8

8.8 x m = 15840

m = 15840/8.8

= 1,800kg

Answer:

[tex]\displaystyle 1800\:kg.[/tex]

Explanation:

[tex]\displaystyle am = F_{net} \\ \\ \frac{15840}{8,8} = \frac{8,8m}{8,8} \\ \\ \boxed{1800 = m}[/tex]

I am joyous to assist you at any time.

The beta decay equation for the transmutation of a radioactive isotope of Rutherfordium has been explained above will be,[tex]\rm Re_{104}^{287} + \beta_0^{-1} \rightarrow Re_{104}^{286}[/tex]  

The reduction in the number of radionuclides per unit time is the rate of decay.

The beta decay equation for the transmutation of a radioactive isotope of Rutherfordium has 104 protons and 183 neutrons.

Atomic weight = 104+183 = 287

Atomic number  = 104

The beta decay equation is;

[tex]\rm Re_{104}^{287} + \beta_0^{-1} \rightarrow Re_{104}^{286}[/tex]

Hence the beta decay equation for the transmutation of a radioactive isotope of Rutherfordium has been explained above.

To learn more about the rate of decay refer to the link;

https://brainly.com/question/14486631

#SPJ1

The smallest time interval in which the magnetic field can be turned on or off to induced the emf is 47.5 s.

The emf induced in the coil is calculated as follows;

emf = dФ/dt

where;

0.12 = 5.7/dt

dt = 5.7/0.12

dt = 47.5 s

Thus, the smallest time interval in which the magnetic field can be turned on or off to induced the emf is 47.5 s.

Learn more about emf here: https://brainly.com/question/13744192

#SPJ11

Momentum is the rate of increase in speed or decrease in speed after application of force

The formula is given by

p is momentum

m is mass

v is velocity

.Internal energy is the total potential and kinetic energies in a substance, and thermal energy is the part of internal energy that can be transferred to another substance. Thus, option "C" is correct.

Thermal energy, is internal energy present in a system in a form of thermodynamic equilibrium probity by its temperature.

Thermal energy cannot be transformed to useful work as easily as the energy of systems that are not in conditions of thermodynamic equilibrium.

Thus, option "C" is correct

To learn more about  thermal energy click here:

https://brainly.com/question/3022807

#SPJ1

Answer:

48 kilometers per hour

Explanation:

144/3 = 48 km/h

Answer:

your answer would 50 m/s I do believe

The correct answer for the speed of the ball upon resting to it's starting point is [tex]50[/tex] m/s.

Given:

Initial speed: [tex]u = 50[/tex] m/s

To calculate the speed upon resting position, Calculate the time requires to reach starting position:

Time required to reach starting point  = 2 * (Time require to reach the maximum height)

Time required to reach the maximum height:

[tex]v = u+(-a )t[/tex]

Final velocity([tex]v[/tex]) is  [tex]0[/tex] m/s.

Negative sign indicates negative acceleration:

[tex]t= \dfrac{50}{9.8}\\\\ = 5.10[/tex]seconds

Time for start point  = [tex]2 * 5.8[/tex]

[tex]=10.6[/tex] seconds

From equation of motion:

[tex]v= u+at[/tex]

[tex]= 50 -9.8* 10.2[/tex]

[tex]= -50.2[/tex] m/s

Negative sign indicates downward direction.

Speed when ball return is  is [tex]50[/tex] m/s.

Learn more about Equations of motion here:

https://brainly.com/question/33951478

#SPJ7

Answer:

.5102 s

Explanation:

Net force acting to accelerate the body is 5000- 100 = 4900 N

F = ma

4900 N = 50 kg * a       then a = 98 m/s^2

v= at

50 m/s  =  98 m/s^2  t        then t =  50/98 =.5102 s

Answer:The velocity of the object will be 5[tex]\sqrt7[/tex]m/s or 13.23m/s

Explanation:

force exerted by the object= 30N

distance displayed by the object by the action of force=6.0m

mass of object=10kg

velocity gained by the object=?

[tex]\frac{1}{2}mv^{2}= forcexdisplacement\\\frac{1}{2}10v^{2} = 30x6\\ 5v^{2}=180\\ v^{2}= 180-5\\ v^{2} =175\\v=\sqrt{175} \\v=5\sqrt{7} or 13.23[/tex]

Answer:

Moving electrons

Explanation:

The magnetic force is a force that is perpendicular to the direction of a moving charge. When two charges are not moving, the electrostatic force is along the line joining them (or the relative spacing). The effects of the static (Coulomb) force change direction due to the finite speed c, giving birth to a 'component' normal to the direction of the relative motion of the two charges (very much like the rain changing direction when you run or drive). When the speed of light c is reached, all electrostatic force becomes magnetic. When the relative separation distance is equal to zero, all forces become electrostatic. This is akin to linear acceleration (and the forces associated with it) shifting direction from being along the motion to normal to the motion as the route becomes totally round, giving birth to centrifugal forces. The magnetic force may be calculated in its general and relativistic forms using just the delayed potential form of the static Coulomb force. R3tarded potential Whereas two non-moving electrons repel electrostatically, two moving electrons can either repel or attract magnetically depending on their motion direction. When the speed of two electrons approaches c, they will generally attract with minimal likelihood of repulsion. It is also stated here that for some combinations of relative velocity and separation distances, the repulsion force can equate the attraction force, resulting in an asymptotic freedom condition in which the electrons are free from these two opposing forces. The electron possesses an inherent magnetic field, which may be mathematically represented as the outcome of a moving charge. The value and radius of the motion (the loop area) to form the magnetic dipole moment p=i a = (e v) an are not known as separate values, but only as a product p(the magnetic dipole moment), where e,v,a are the electron charge, speed, and motion loop area, respectively. The total of the magnetic field's effects equals zero for two electrons at rest with opposing polarity, known as paired electrons. This state is stable in matter because the total energy is lower. The magnetic field of a permanent magnet is the consequence of the chemical composition locking all of the lone electrons in a permanent magnetic material in their place. In a typical magnetic material, such as iron, such electrons only unify their pole orientation due to the action of an applied magnetic field. That is why adding an iron core to a coil produces a larger magnetic field. In diamagnetic materials, such alignment occurs (also governed by the chemical composition), resulting in repulsion and levitation rather than typical attraction. The velocity of electrons in wire currents is very modest, as is the generated magnetic force, because the phenomena is of second order (depends on the change of the separation distance rather than the distance itself as in the electrostatic case). However, due to the massive number of electrons involved (Avogadro number size), the magnetic force can become quite strong. The impact is amplified if you use many loops. This is used to power a large engine, for example. It is important to note that gravity is far less than magnetism, yet it may be extremely big owing to the number of particles involved—especially because gravity is always naturally orientated for attraction alone, and there is no cancellation of the gravity field by altering orientation.

Explanation:

Hope this helps .

Good luck ✅.

Answer:

HELIOS- The god of the sun in

HAZMAT-Hazardous materials

NIRSpec- Near Infrared Spectrograph

Explanation:

The acronyms will be:

HAZMAT is an abbreviation for “hazardous material that is the substances in quantities or forms that may pose a reasonable risk to health, property, or the environment.

Near-infrared spectroscopy (NIRS) is a brain imaging method that measures light absorbance to calculate oxy-hemoglobin (oxy-HB) and deoxy-hemoglobin.

Learn more about acronym on:

https://brainly.com/question/246998

#SPJ9

Answer:

337.5m

Explanation:

Kinematics

Under constant acceleration, the kinematic equation holds:

[tex]s=\frac{1}{2}at^2+v_ot+s_o[/tex], where "s" is the position at time "t", "a" is the constant acceleration, "[tex]v_o[/tex]" is the initial velocity, and [tex]s_o[/tex] is the initial position.

Defining Displacement

Displacement is the difference in positions: [tex]s-s_o[/tex] or [tex]\Delta s[/tex]
[tex]s=\frac{1}{2}at^2+v_ot+s_o[/tex]

[tex]s-s_o=\frac{1}{2}at^2+v_ot[/tex]

[tex]\Delta s=\frac{1}{2}at^2+v_ot[/tex]

Using known information

Given that the initial velocity is zero ("skier stands at rest"), and zero times anything is zero, and zero plus anything remains unchanged, the equation simplifies further to the following:

[tex]\Delta s=\frac{1}{2}at^2+v_ot[/tex]

[tex]\Delta s=\frac{1}{2}at^2+(0)*t[/tex]

[tex]\Delta s=\frac{1}{2}at^2+0[/tex]

[tex]\Delta s=\frac{1}{2}at^2[/tex]

So, to find the displacement after 15 seconds, with a constant acceleration of 3.0 m/s², substitute the known values, and simplify:

[tex]\Delta s=\frac{1}{2}at^2[/tex]

[tex]\Delta s=\frac{1}{2}(3.0[\frac{m}{s^2}])(15.0[s])^2[/tex]

[tex]\Delta s=337.5[m][/tex]

Answer:

I'm not a scholar of hydroelectric power in Nepal, so consider my answers carefully, below.

Explanation:

High Potential:  Hydroelectric power comes from the potential energy stored in a mass that is above Earth's surface.  As the word "hydro" implies, the mass in this case is water.  Water from snow and glacier melt, and from normal precipitation (rain) in mountainous regions eventually cascades down the mountains in fast-flowing rivers or waterfalls.  Often, there are lakes or man-made reservoirs to collect and store the water before it flows down.  Mt. Everest is 8848 meters tall (about 29,000 feet).    If a lake forms at just 2,000 meters, one can calculate the amount of energy in each kilogram of water stored in the lake that represents the potential energy available at that altitude.  1 kg of water at 2,000 meters has potential energy, PE, according to the equation:  PE = mgh, where m is the mass in kg, g is Earth's acceleration due to gravity (9.8 m/sec^2), and h is height, in meters.  

PE = mGH

PE = (1 kg)*(9.8 m/sec^2)*(2,000 meters) = 19,000 kg*m/sec^2

1 kg*m/sec^2 is the SI unit for 1 Joule, a measure of energy.

This potential energy can be converted into electrical energy by releasing the water so that it can flow down to a water-powered turbine that spins magnets and coils of wire that produce electricity.  The 19,000 Joules of water potential energy can be converted to electrical power, less any inefficiency in the system, such as friction.

Nepal has the natural advantage in that it has many high mountain ranges with water flows that can be used for generating electrical power.  The result is low operating costs (the fuel is the flowing water) and no greenhouse gas emissions

The difficulty in developing hydroelectric power in Nepal is due to the same factor that gives it an advantage:  it is difficult constructing large hydroelectric plants in such rough terrain, and the power lines that are needed to transport the power to its destination are expensive and difficult to maintain and repair.

Modern observations have shown that the geometry of the universe is flat and the universe mist be infinite.

Geometry refer to a branch of mathematics that encapsulates measurements of lines, shapes, dimensions, points and shapes.

Therefore, Modern observations have shown that the geometry of the universe is flat and the universe mist be infinite.

Learn more about geometry below.

https://brainly.com/question/19241268

#SPJ11

Answer:

I think the answer is C.

Explanation:

A primary source is a first hand account of an event while a secondary source is a retelling or second hand account meaning as many details will be prevalent.

In permanent waving, the size of the curl should be determined based on the size of the rod.

Permanent waving can be defined as a hairstyle that is typically made by setting a person's hair in waves or curls while treating it with chemical solutions such as thio, so as to make it last for a long period of time.

In permanent waving, the size of the curl should be determined based on the size of the rod that would be used for the hairstyle.

Read more on hairstyle here: https://brainly.com/question/25247384

#SPJ12

If an object is neutrally buoyant (does not sink or float) in fresh water, the same object placed into salt water would float.

Buoyancy is the force through your fluids or total or submerged bodies. Also known as Archimedes' theorem. The fluid of the direction on the body produces a resultant force but with the direction of the weight, with the opposite direction, upwards.

In this case, we have salt water that is denser, allowing almost no objects to sink, so the buoyant force is greater that acts on the object.

See more about Buoyancy at brainly.com/question/19168433

#SPJ12

Answer:

Coolant absorbs thermal energy

Explanation:

Since the coolant is used to refrigerate the engine, it have to absorb the thermal energy

The mercury thermometer operates on the principle of dilation.

Like all liquids, mercury expands as it is heated, so it moves along the thermometer tube, determining the temperature. Its expansion rate is calibrated on the glass scale, expansion is linear and can be accurately calibrated.

Mercury allows it to be used in a thermometer by its liquid expansion fast enough to measure something so that it still maintains an accurate measurement.

See more about mercury thermometer at brainly.com/question/22237259

#SPJ12

The two most successful theories of light were the corpuscular (or particle) theory of Sir Isaac Newton and the wave theory of Christian Huygens. Newton's corpuscular theory stated that light consisted of particles that travelled in straight lines.

hope it helps

As the mass of the central star increases, the distance to the habitable zone increases and the size (width) of the habitable zone increases.

A star is a large luminous object found in space which produces heat and light energy as well as electromagnetic radiation.

The habitable zone of a star is the zone or area where liquid water can be found.

The distance habitable zone of a star increases with increase in mass of the star.

Therefore, as the mass of the central star increases, the distance to the habitable zone increases and the size (width) of the habitable zone increases.

Learn more about habitable zone at: https://brainly.com/question/2869486

#SPJ11

The volume in the pump when the pump piston is all the way down represents the end systolic volume.

End systolic volume is the volume of blood in a ventricle at the end of contraction, or systole, and the beginning of filling, or diastole.

End systolic volume is the lowest volume of blood in the ventricle at any point in the cardiac cycle.

Thus, the volume in the pump when the pump piston is all the way down represents the end systolic volume.

Learn more about volume here: https://brainly.com/question/1972490

#SPJ12

Anita has to pay attention to biometrics since even the most accomplished athletes may benefit from it.Option B is correct.

Biometrics is the measurement of physiological traits that may be used to identify a person, including but not limited to fingerprint, iris pattern, and face features.

Anita is aware that she is one of her team's top basketball players. She has drawn interest from several colleges.

One has offered her the chance to collaborate with a biometrics expert once she joins the company. Since she is already a very accomplished athlete.

Anita does not believe that this is truly essential. The best piece of advice I can give Anita is to pay attention to biometrics since even the most accomplished athletes may benefit from it.

Hence,option B is correct.

To learn more about the biometrics refer;

https://brainly.com/question/20318111

#SPJ1

Answer:

The food supply chain comprises all the stages that food products go through, from production to consumption

Explanation:

Answer:

3 meters

Explanation:

Velocity = displacement/time

Displacement=velocity×time

As, time from 7 to 8 is 1 sec. And velocity increases from 0 to 3 m/s

So, Displacement = 3×1

=3m

Please give me brainlist.