Answer:
[tex]\boxed {\boxed {\sf 8 \ m/s}}[/tex]
Explanation:
Speed is equal to distance over time.
[tex]s=\frac{d}{t}[/tex]
The distance is 400 meters and the time is 50 seconds.
[tex]d= 400 \ m \\t= 50 \ s[/tex]
Substitute the values into the formula.
[tex]s=\frac { 400 \ m }{ 50 \ s}[/tex]
Divide.
[tex]s= 8 \ m/s[/tex]
The speed of the car is 8 meters per second.
If a sample of an unknown material with a mass of 0.68 g and a volume of 0.8 cm3 is dropped
into maple syrup, will it sink or float? maple syrup has a density of 1.33 g/cm3
how to prevent air resistance or what reduces air resistance?
Answer:
reducing the area in contact with air and being more streamlined
Explanation:
The amount of air resistance an object experiences depends on its speed, its cross-sectional area, its shape and the density of the air
what is a benefit of fossil fuel consumption?
Answer:
increased greenhouse gases
Explanation:
I think this is the right answer...
A compact car, mass 664 kg, is moving at 19 km/h toward the east. What is the car's momentum in kg x m/s?
Answer:
3504.4 kgm/s
Explanation:
First, convert km/hr to m/s:
19 km/hr x 1000m/1km x 1/60min x 1/60s = 5.28 m/s
p = mv
p = (664 kg)(5.28 m/s) = 3504.4 kgm/s
If you walk at an average speed of 5 km/h for 30 minutes,
how far will you walk?
Answer:
150
Explanation:
30 times 5 = 150 i think
The diagrams below in which arrows indicate the direction of movement represent charged particles placed near one another. The diagram that correctly represents the motion of the charged particles
Answer: Diagrams 3 and 4.
Explanation:
The force that one charge q1 experiences when is at a distance R of another charge q2 is:
F = k*(q1*q2)/R^2
Where k is a constant.
If this force is positive, the chares move away from each other, so if both charges are positives or both charges are negatives, then the charges move away from each other, meaning that the force is repulsive.
If the force is negative, the force is towards the other particle, then the force is attractive. This happens when one charge is positive and the other is negative.
Then the correct options are 3 and 4.
What is motion? Short sentence
Riley measured the distance her friend Blakely ran on a straight track every 2 seconds. What was Blakely's average speed? What was her acceleration?
Answer:
Average speed = 25m/s
Acceleration = 12.5m/s^2
Explanation
Let the distance covered by Riley be 50m
Average speed = Distance/Time
Average speed = 50/2
Average speed = 25m/s
Acceleration = Speed/time
Acceleration = 25/2
Acceleration = 12.5m/s^2
Note that the value of the distance was assumed
The diagram shows the speed-time graph of a car travelling between two sets of traffic lights.
Calculate the distance travelled by the car in the first 5 seconds of its journey.
The light is in one direction after passing through a polarizer
True or false
Answer:
Light propagating in a plane that makes a 0 degree angle with the polarizer will pass through and all other planes will only pass the component of the vector that is in line with the polarizer. What the image suggests, and other images like the second one, is that the light is now all propagating parallel to a single plane
Explanation:
hope this helps
Answer:
true
Explanation:
a polarizer allows only light of a specific wavelength to pass through
A force of 100N stretches an elastic string to a total length of 20cm. if an additional force of 100N stretches the spring 5 cm further, find the natural length of the spring if the elastic limit is not exceeded. Pls help ASAP
Answer:
8cm
Explanation:
The general formula to find this is F/X where in this case the f is the total of the two forces (100+100) and x is the sum of the length ( 20+5) which together comes 200&25respectively then divide 200 with 25 which comes 8cm.
Many battery-powered devices come with cords that allow them to be
plugged into electrical outlets. What change has to take place inside
the power cord in order for the device to function properly?
Answer:
The change that has to take place inside the power cord in order for the device to function properly include;
The changing of the alternating current (AC) from the electrical outlet to the direct current having a specific voltage and current value with which the device can be powered
Explanation:
A battery powered device makes use of direct current (DC) electric power from a battery, while the power normally given out at an electrical outlet comes as an alternating current (AC) electric power source.
The power cord for battery-powered device, also known as an AC/DC adapter, that allows them to be plugged into electrical outlets converts the AC electric current it obtains from the electrical outlets to DC electrical current of the appropriate voltage and amperage that the device can make use of for electric power to function and for charging the battery which is the power source for the device
Therefore, the change that has to take place in the power cord is the conversion of the electric outlet alternating current (AC) voltage and amperage values, into direct current (DC) of the required voltage and current for the device
What will most likely happen if a sound wave moves from the air through a solid?
O It will increase in frequency.
O It will decrease in speed.
O It will increase in speed,
O It will decrease in wavelength.
The most likely outcome when a sound wave moves from the air through a solid is : ( C ) It will increase in speed
Sound wavesA sound wave is disturbance pattern that goes through a medium such as air and any liquid or solid medium. when a sound wave moves from air medium through a solid medium the speed at which the sound waves moves will increase due to the change in medium.
Hence we can conclude that the most likely outcome when a sound wave moves from the air through a solid is it will increase in speed.
Learn more about sound waves : https://brainly.com/question/1199084
PLEASE HELP 20 POINTS
A car of mass 700 kg and moving at a speed of 30 m/s collides with a stationary truck of mass 1400 kg, and the two vehicles lock together on impact. The combined velocity of the car and truck after the collision is m/s.
Pedro picked up and held a cube of ice in his hand and noticed that he no longer felt a difference in temperature after the ice cube melted in his hand. Which of the following statement best explains what happened?
1.Heat was transferred from Pedro’s hand to the ice increasing the temperature of the ice.
2.Heat was released from the ice cube into the air increasing the temperature of the ice.
3.Cold was transferred to Pedro’s hand from the ice increasing the temperature of the ice.
4.Heat was released from Pedro’s hand into the air melting the ice increasing the temperature of the ice.
Answer:
the answers is 1.
Explanation:
this is because heat always travel's from the warmest object to the coldest. His hands thermal energy is transferred to the ice making the ice round to the same temperature of his hand. This can also be an example of equalibrum.
if a car, going 20 m/s with a mass of 1000kg hits a garbage can, what is the momentum of the can and the car afterwards?
Answer:
Momentum is the product of the mass and velocity of an object.
[tex]p = m \times v[/tex]
[tex]p = 1000kg \times 20 \frac{m}{s} = 20000kg \times \frac{m}{s} [/tex]
DO NOW: You are picking up a pendulum (Clay ball on a string) as you pull the pendulum up on one side and let it fall, what types of energy are being used?
Answer:
The energy used in the pendulum is the initial Potential (Mechanical) Energy, P.E. given to the Clay ball attached to the inclined and extended string by virtue of its elevated position in relation to the rest position (lower state)
The swinging of the pendulum is brought about by the dynamic equilibrium between the initial potential energy, P.E. and the Kinetic Energy, K.E., of the pendulum when it is in motion
The (total) Mechanical Energy, M.E. of the ideal pendulum is constant at all times during the motion of the pendulum and it is given by the following formula;
M.E. = P.E. + K.E.
At the top of the swing, P.E. is maximum and K.E. is zero
Similarly, at the mid (lowest) point in the swing, instantaneously, P.E. is zero and K.E. is maximum
Explanation:
Is this correct is so what is wrong I will give Brainlist
Answer:
yes
Explanation:
A .8 kg block is attached to the end of a spring whose spring constant is 85 N/m. The block is placed on a frictionless tabletop, give an initial displacement of 3.5 cm and then released. What is the magnitude of this energy?
Answer:
E = 0.052 J
Explanation:
We are given;
Spring constant; k = 85 N/m
Displacement; x = 3.5 cm = 0.035 m
Formula for the energy is;
E = ½kx²
E = ½ × 85 × 0.035²
E = 0.052 J
Can someone please help me with this
Answer:
i dont know about this
Explanation:
What is the difference between a bar magnet and an electromagnet? (check all that are
true)
A . A bar magnet is a permanent magnet that will keep its magnetism for a long time
B . An electromagnet is always stronger than a bar magnet.
C . A bar magnet will only stay a magnet if it is in contact with something metal.
D . An electromagnet is a temporary magnet that is only magnetic when electricity is flowing through the wire.
Answer:
D and A
Explanation:
Hint The basic difference between them is that a bar magnet is a permanent magnet whereas an electromagnet is a temporary magnet. An electromagnet is formed when an electric current is passed through wires wound around soft metalcore. An electromagnet loses its magnetism once the current flow is stopped.
Short Answer
1. You have a glass of water at 55 degrees celsius. You add it to a full bathtub of water at 15 degrees celsius.
What would you predict the final temperature to be?
15 degrees because a glass of water won't do anything to a bath tub of 15 degree water
the mass of the earth is 6 × 10²² kg and that of the moon is 7.4× 10²² Kg if the distance between the earth and moon is 3.84 × 10⁵ km . calculate the force of the earth exerted by it on the moon . Take G = 6.67×10¹¹ Nm² / kg²
Answer:
Force = 20.08 x 10⁴⁷ N
Explanation:
Given:
M1 = 6 × 10²⁴ kg (rectified)
M2 = 7.4× 10²² Kg
Radius r = 3.84 × 10⁵ km
G = 6.67×10¹¹ Nm² / kg²
Find:
Force
Computation:
F = GM1M2 / r²
Force = [(6 × 10²⁴)(7.4× 10²²)(6.67×10¹¹ )] / (3.84 × 10⁵)²
Force = [296.148 × 10⁵⁷] / [14.7456 × 10¹⁰]
Force = 20.08 x 10⁴⁷ N
formula of average speed
Answer:
Hey mate....
Explanation:
This is ur answer.....
Hope it helps!
Mark me brainliest....
FOLLOW ME!!! :)
True or false? Humans use more water for washing at home than for any other use.
Which possesses the most gravitational potential energy?
A. a 4 kg object 0.25 m above the ground.
B. a 100 g object 20 m above the ground.
C. a 2kg object 0.75 m above the ground.
D. a 50 g object 30 m above the ground.
Answer:
uxjdkddoedlkfkkllllllllo
Mention theree disadvantages of friction
between
the parts of a
machine
How does. 1 . oiling
2 using ball bearing
3) Help recluce friction
pleaze help me to this question
Answer:
Please find the answer in the explanation.
Explanation:
Mention three disadvantages of friction between the parts of a machine
Three disadvantages of friction between the part of a machine are;
1. Friction causes wear and tear of machine parts.
2. Friction generates heat between the part of a machine.
3. Friction reduces the efficiency of a machine.
How does.
1 . oiling
2 using ball bearing
To reduce friction, you need to apply a lubricant. Oil and grease are examples of a lubricant. A lubricant helps to reduce friction by making the surface of the machine parts slippery thereby reducing tear and wear.
Also, friction can be reduced by using ball bearing which will allow the rolling of machine parts.
A toy car, as shown below, is moving forward with a force of six Newton's. If the wind blows from behind with a force of two Newton's, what will happen to its speed and position
Answer:
its speed will increase to 8 newtons allowing its position to dramatically change.
Copper and hydrogen con euch be formed by electrolysis,
At which electrodes are these stoments formed?
copper
hydrogen
A
anode
anode
B
anode
cathode
cathode
anode
D
cathode
cathode
ОА, А
Answer:
C.cathode, cathode
Explanation:
In electrolysis, a device called ELECTRODE, which electric current passes through is used. However, electrodes can either be anode or cathode depending on the charge. Anode is a positive electrode that attracts negative ions while cathode is a negative electrode that attracts positive ions.
According to this question, Copper (Cu) and hydrogen (H) which are both positive ions i.e. Cu2+ and H+ will move towards and form at the CATHODE. Hence, the answer is cathode, cathode for the respective element.
Why do you think the speed of sound is higher
in solids, than liquids and gases?
Answer:
Explanation:
Particles of a solid are closely packed, and when a solid is hit to produce a sound the kinetic energy present in the solid will cause the particles to vibrate vigorously in the intermolecular spaces in the solid, whereas the paticles of liquids and gases are rather further apart therefore having large intermolecular spaces between particles.