a body starts moving from rest and attends the acceleration of 0.5m/s². calculate the velocity at the end of 3 minutes also find the distance travelled by it during that time
​

Human response times are eliminated from time measurement using light gates. if the stopwatch is damaged, the data logger terminates it.

Speed is defined as the rate of change of the distance or the height attained. it is a time-based quantity. it is denoted by u for the initial speed while u for the final speed. its si unit is m/sec.

To measure the speed of a toy automobile, it is preferable to utilize light gates and a computer as opposed to a stopwatch and a ruler.

Because Light gates eliminate the effects of human reaction delays for measuring time. is damaged,

The stopwatch is stopped by the data logger. With no reaction time, the uncertainty is substantially reduced.

The average speed may be determined by measuring the distance between the two light gates.

Hence, it is better to use light gates and a computer than to use a stopwatch and a ruler to measure the speed of a toy car.

To learn more about the speed refer to the link;

https://brainly.com/question/7359669

#SPJ1

Nothing happens to the brightness of the light bulbs in the parallel circuit if the power supply is capable of supplying the additional current.

Answer:

Sonam will jump further than wangchuck

[tex] \huge \bold \red {Aɴswᴇʀ}[/tex]

Magnetite is a Natural magnet

Answer:

first answer:He can promote healthier start in the children's life by trying to avoid what he encounter when he has no access to health care.

Answer:

Damp Proofing:

Explanation:

The presence of damp proofing is very necessary to maintain the health of a structure. DPC plays an important role in all types of buildings and it should be necessary to know about the importance, requirements, and properties of DPC. In many of the buildings all over the world, the rising damp may be due to a damaged damp-proof course, or sometimes, there may be not any damp proof course in a building.

The mobility and hall coefficient willl be 57.7 ×10⁻⁴ and 29.41 ×10⁻⁶ v.

Electric current is defined as the ratio of the charge flow in a given time interval. It is denoted by I. It has the unit is ampere.

Given data;

Electric current,I= 25 A

Thickness  = 0.1 mm

Length = 3 mm

Flux  = 1.4 w/m²

The charge density is found as;

[tex]\rm \rho =- \frac{1}{R_H} \\\\ \rho = 0.119 \times 10^{11} C/m^3[/tex]

The value of the hall voltage is;

[tex]\rm V_H = BVd \\\\ V_H = B \frac{I}{\rho dt} d \\\\ V_H = \frac{BI}{\rho t } \\\\ V_H = \frac{0.14 \times 25 }{0.119 \times 10^{11} \times 0.1 \times 10^{-3}} \\\\ V_H = \frac{3.5 }{0.119 \times 10^7} \\\\ V_H = 29.41 \times 10^{-6} \ v[/tex]

The mobility of electrons is;

[tex]\rm \mu_e = \frac{\rho}{n_e}\\\\ \mu_e = \frac{6.848 \times 10^7}{13.5 \times 10^{-30}\times 1.607 \times 10^{-19}} \\\\ \mu_e = 57.7 \times 10^{-4}[/tex]

Hence the mobility and hall coefficient willl be 57.7 ×10⁻⁴ and 29.41 ×10⁻⁶ v.

To learn more about the electric current refer to the link;

https://brainly.com/question/2264542

#SPJ1

Explanation:

Hello, nice to meet you.

this answer will help for you

The tension in the given string of 1.0 g and length of 0.64 m is closest to 2.84 N

The tension in the string at nth harmonic is calculated as follows;

[tex]f_n = \frac{n}{2l} \sqrt{\frac{T}{\mu} }[/tex]

where;

[tex]f_n = \frac{n}{2l} \sqrt{\frac{T}{\mu} }\\\\\frac{f_n(2l)}{n} = \sqrt{\frac{T}{\mu} }\\\\\frac{f_n^2(4l^2)}{n^2} = \frac{T}{\mu} \\\\T = \mu (\frac{f_n^2(4l^2)}{n^2})\\\\T = 0.00156(\frac{100^2 \times 4\times 0.64^2}{3^2} )\\\\T = 2.84 \ N[/tex]

Learn more about tension in string here: https://brainly.com/question/24994188

#SPJ1

Answer:

it have two answers a and c

Explanation:

please mark me as brainlyst

Answer: c)how far the object is from the light source
              d)the size of the screen

The size of the shadow depends on the distance of the source of light and on the angle at which the light rays fall on the object. If the source of light is closer to the object, a larger shadow is formed than when the source of light is far from the object.

The angle at which a light strikes an object affects the size and shape of its shadow. Shadows are longer when the light source is at a low angle (side on) and shorter when the light source is at a higher angle (overhead).

The position of the light source can change the size and shape of a shadow. A good example would be, when we are outside on a sunny day, we can see how our shadows change throughout the day. The Sun's position in the sky affects the length of the shadow.

∩_∩
(„• ֊ •„)♡
┏━∪∪━━━━┓
  hope it helped
┗━━━━━━━┛

The centripetal acceleration of the tip of the fan blade is 96.23 m/s²

The acceleration developed when a body is moving in circular way, directed towards the center of the circular path.

The tip of a fan blade is 0.61 m from the center of the fan. the fan turns at a constant speed and completes 2 rotations every 1.0 s

ac = ω²r

where ω = angular speed = 2πN/60, N = Rotation per minute

From the question, N = 2 x 60/1 = 120  RPM

So, the angular speed will be

ω = 2π x 120 /60

ω  = 12.56 rad/s

Then, the centripetal acceleration is

ac =  (12.56)² x   0.61 m

ac = 96.23 m/s²

Thus, centripetal acceleration of the tip of the fan blade is 96.23 m/s²

Learn more about centripetal acceleration

https://brainly.com/question/14465119

#SPJ1

Taking into account the definition of pH and pOH, the concentration of H⁺ ions at pH=8 is 1×10⁻⁸ M and the concentration of OH⁻ ions at pH=8 is 1×10⁻⁶ M.

pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.

The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:

pH= - log [H⁺]= - log [H₃O⁺]

Similarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:

pOH= - log [OH⁻]

The following relationship can be established between pH and pOH:

pOH + pH= 14

In this case, pH=8. Replacing in the definition of pH:

8= - log [H⁺]

Solving:

[H⁺]= 10⁻⁸= 1×10⁻⁸ M

Finally, the concentration of H⁺ ions at pH=8 is 1×10⁻⁸ M.

Being pH= 8, pOH is calculated as:

pOH + 8= 14

pOH= 14 - 8

pOH= 6

Replacing in the definition of pOH the concentration of OH⁻ ions is obtained:

- log [OH⁻]= 6

Solving

[OH⁻]= 10⁻⁶= 1×10⁻⁶ M

Finally, the concentration of OH⁻ ions at pH=8 is 1×10⁻⁶ M.

Learn more about pH and pOH:

brainly.com/question/16032912

brainly.com/question/13557815

#SPJ1

The speed of the car moving after 7 seconds will be 31.5 m/sec.

The change of distance with respect to time is defined as speed. Speed is a scalar quantity. It is a time-based component. Its unit is m/sec.

The given data in the problem is

m is the mass of the car = 1289  Kg.

u is the initial velocity  = 0 m/sec

a is the acceleration in m/sec²

v is the velocity after 7 seconds =?

The power developed is;

P =FV

F=ma

P=maV

183831=1289 kg × a × V

a = 142.61 / V

From Newton's second equation of motion;

V=u+at

V=0+at

V=(142.61/V)t

V²=142.61 × 7

V=31.5 m/sec

Hence, the speed of the car moving after 7 seconds will be 31.5 m/sec.

To learn more about the velocity, refer to the link: https://brainly.com/question/862972.

#SPJ1

The action that  humans can take to reduce wave erosion is to build breakwaters in the ocean.

The term erosion has to do with the washing away of top soil either by water or by wind. The control of erosion is a very important soil conservation effort.

Hence, the action that  humans can take to reduce wave erosion is to build breakwaters in the ocean.

Learn more about erosion:https://brainly.com/question/3852201?

#SPJ1

Answer: (C) build breakwaters in the ocean

Explanation: Got it on edge

Higher wind speeds would increase the amount of electricity generated by a wind turbine.

A power plant is an industrial structure that generates electricity. The majority of power plants are linked to the electrical grid.

Stronger winds produce greater power because they enable the blades to revolve more quickly. Greater mechanical and electrical power from the generator result from faster spinning.

Hence, higher wind speeds would increase the amount of electricity generated by a wind turbine.

To learn more about the power plant, refer to the link;

https://brainly.com/question/7670779

#SPJ1

The Oort cloud extends to the gravitational limits of the solar system would comets come from.

It is a hypothetical idea of a cloud of mostly frozen planetesimals that would orbit the Sun at distances between 2,000 and 200,000 AU.

The Oort cloud reaches the solar system's outer gravitational boundaries, where comets originate.

Hence cloud extending to the gravitational limits of the solar system will be oorto cloud.

To learn more about the oort cloud refer;

https://brainly.com/question/23368033

#SPJ1

The event in the life of a star that begins its expansion into a giant is that almost all the hydrogen in its core that was hot enough for fusion has been turned into helium.

A fusion reaction is defined as the type of nuclear reaction whereby two or more atomic nuclei combine to form a heavier nucleus.

The stars are being transformed into giants through fusion reaction.

A higher amount of hydrogen is found in the core of the star which is being use up in the fusion reaction to form helium.

When the hydrogen in the centre of a star runs out, the star begins to use hydrogen further out from its core. This causes the outer layers of the star to expand and cool.

Therefore, the event in the life of a star that begins its expansion into a giant is that almost all the hydrogen in its core that was hot enough for fusion has been turned into helium.

Learn more about helium here:

https://brainly.com/question/26226232

#SPJ1

Alpha particles have highest mass.

Alpha particles are most ionising.

Gamma particles are the most penetrating.

Beta particles are negatively charged.

Gamma particles have the highest speed.

learn more about gamma rays here:

https://brainly.com/question/2399890

#SPJ10

The equivalent resistance of the circuit will be option (D) 80.0 Ω

According to Ohm's law, the voltage across two places is precisely proportional to the current flowing through a conductor between them.

The obstruction to current flow in an electrical circuit is measured by resistance. The Greek letter omega (Ω) represents the unit of measurement for resistance, known as ohms. Georg Simon Ohm is the name given to ohms.

Since in the given figure the resistance are in series so there equivalent resistance will be sum of the two resistance. If they were in parellal connection then we will add reciprocal of their resistance.

Let R1 = 60 Ω and R2 = 20 Ω. So their equivalent resistance will be as follow:

R = R1 + R2

R = 60 + 20

R = 80 Ω

Hence the equivalent resistance of the circuit will be 80 Ω

Learn more about resistance here:

https://brainly.com/question/14883923

#SPJ10

If Kevin swims one 25.0-m stretch in 9.22 seconds, his average speed is approximately 2.71m/s.

Speed is expressed as distance over time.

Speed = Distance / time

Given the data in the question

Average speed = 25.0m / 9.22s

Average speed = 2.71m/s

If Kevin swims one 25.0-m stretch in 9.22 seconds, his average speed is approximately 2.71m/s.

Learn more about average speed here: https://brainly.com/question/27571996

#SPJ11

Answer:

C

Explanation:

you need to be able to see through a colour filter, which means youd need transparent or translucent

Transparent materials passes light and they reflect also. The color filters are made by transparent or translucent materials. Thus option c is correct.

The ability of a material to pass light through it is called transparency. Some transparent materials can reflect the light. For example mirror, glasses etc. The materials which passes light but are not transparent is called translucent materials.

The material which does not pass light inside is called opaque. Wood, plastics etc. are opaque materials. Transparent covers, glasses make their inside visible.

Colour filters are made by transparent or translucent materials. They are used to filter or choose a particular colour from a group of reflected lights.

Color filters are used in spectrometers and other optical devices. They filter the incoming wavelengths to select the desired one. Hence, option c is correct.

To find more about color filters, refer the link below:

https://brainly.com/question/28455847

#SPJ2

The energy of a wave is directly proportional to the square of the amplitude of the wave.

There is direct relationship between energy of the wave and the amplitude of the wave. The energy transported by a wave is directly proportional to the square of the amplitude of the wave. This means if energy is increase the amplitude of wave becomes double and vice versa.

Energy = (amplitude)2

So we can conclude that the energy of a wave is directly proportional to the square of the amplitude of the wave.

Learn more about energy here: https://brainly.com/question/13881533

#SPJ1

[tex]Energy = (amplitude)^{2}[/tex]

Energy is define as the capacity for doing work.

Amplitude is the maximum displacement or distance moved by a point on a vibrating body or wave measured from its equilibrium position.

So , the relationship between energy of the wave and the amplitude of the wave is described as the energy transported by a wave is directly proportional to the square of the amplitude of the wave.

Here , If energy is increase the amplitude of wave becomes double.

[tex]Energy = (amplitude)^{2}[/tex]

Hence , the energy of a wave is directly proportional to the square of the amplitude of the wave.

By using the above equation if the amplitude is 6 Units then :

Energy = [tex](6)^{2}[/tex] = 36 units

learn more about amplitude :

https://brainly.com/question/8662436

#SPJ1

Given that a ball is thrown into the air and its height in feet after t seconds is given by y = 45t - 15t²,  the instantaneous velocity when t=4 is -75ft/s.

Given that;

First, we determine the derivative of y = 45t - 15t²

y' = (1)45 - (2)15t

y' = 45 - 30t

We substitute in t = 4

y' = 45 - 30t

y' = 45 - 30(4)

y' = 45 - 120

y' = -75ft/s

Given that a ball is thrown into the air and its height in feet after t seconds is given by y = 45t - 15t²,  the instantaneous velocity when t=4 is -75ft/s.

Learn more about velocity here: https://brainly.com/question/2263547

#SPJ12

The electric potential at the origin of the xy coordinate system is negative infinity

The electric field due to the 4.0 μC charge is E = kq/r² where

The electric field due to the -4.0 μC charge is E = kq'/r² where

Since both electric fields are equal in magnitude and directed along the negative x-axis, the net electric field at the origin is

E" = E + E'

= -2E

= -2kq/r²

So, the electric potential at the origin is V = -∫₂⁰E".dr

= -∫₂⁰-2kq/r².dr

Since E and dr = dx are parallel and r = x, we have

= -∫₂⁰-2kqdxcos0/x²

= 2kq∫₂⁰dx/x²

= 2kq[-1/x]₂⁰

= -2kq[1/x]₂⁰

= -2kq[1/0 - 1/2]

= -2kq[∞ - 1/2]

= -2kq[∞]

= -∞

So, the electric potential at the origin of the xy coordinate system is negative infinity

Learn more about electric potential here:

https://brainly.com/question/26978411

#SPJ11

Emotional health: expressing feelings is the phrases that belong together. The best answer from the choices provided willl be A.

The condition of complete physical, mental, and the absence of sickness and disability is called good health.

Which of the following phrases belong together?

A.

emotional health: expressing feelings

B.

physical well-being: regard for others

C.

Social health: obtaining enough sleep  

D

Mental health: living in harmony with the environment

The concepts "emotional wellness" and "expressing feelings" go hand in hand. The best response from the available options is going to be A.

Hence, the best answer from the choices provided willl be A.

To learn more about the good health, refer to the link;

https://brainly.com/question/949255

#SPJ1

The air space would be half the size it was at the surface.

It should be noted that airspace means the portion of the atmosphere controlled by a country that's above its territory.

Based on the information given, the The air space would be half the size it was at the surface.

Learn more about air on:

brainly.com/question/636295

#SPJ12

Answer:

[tex]\fbox {5 seconds}[/tex]

Explanation:

The formula which is used here :

[tex]\fbox {v = u + at}[/tex]

[tex]\longrightarrow \textsf {v : final velocity}[/tex]

[tex]\longrightarrow \textsf {u : initial velocity}[/tex]

[tex]\longrightarrow \textsf {a : acceleration}[/tex]

[tex]\longrightarrow \textsf {t : time taken}[/tex]

Solving :

v = u + at

0 = 50 + (-10)t

10t = 50

t = 5 seconds

Explanation:

Hello !

Contact force:-A contact force is any force that requires contact to occur. examples Applied force,

Normal force,

Frictional force,

Tension force,

Air resistance force,

Spring force.

Non-contact force:-is a force which acts on an object without coming physically in contact with it. types of non-contact forces are gravitational force, magnetic force, electrostatic and nuclear force.

frictional force:-is the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding against each other.

Normal reaction force:-A force acting perpendicular to two surfaces in contact with each other.

The tension force is defined as the force that is transmitted through a rope, string or wire when pulled by forces acting from opposite sides.

The force exerted by a spring on objects attached to its ends is proportional to the spring's change in length away from its equilibrium length and is always directed towards its equilibrium position. F = -kx. The proportional constant k is called the spring constant.

During the collision, each body exerts a force on the other. This force is called an impulsive force.

The gravitational force :-is a force that attracts any two objects with mass. We call the gravitational force attractive because it always tries to pull masses together, it never pushes them apart.

The electrostatic force is also known as the Coulomb force or Coulomb interaction. It's the attractive or repulsive force between two electrically charged objects.

magnetic force, attraction or repulsion that arises between electrically charged particles because of their motion.

(a) The force applied on the box is 98 N.

(b) When you stop pushing, the displacement of the box before coming to rest is 1.02 m.

The force exerted on the box is calculated from Newton's second law of motion.

F - Ff = ma

where;

at constant speed, a = 0

F - Ff = 0

F = Ff

Ff = μmg

Ff = 0.2 x 50 x 9.8

Ff = 98 N

F - Ff = ma

-Ff = ma

a = -Ff/m

a = -98/50

a = - 1.96 m/s²

v² = u² + 2as

when the box stops, v = 0

0 = u² + 2as

0 = (2)² + 2(-1.96)s

0 = 4 - 3.92s

3.92s = 4

s = 4/3.92

s = 1.02 m

When you stop pushing, the displacement of the box before coming to rest is 1.02 m.

Learn more about applied force here: https://brainly.com/question/14428983

#SPJ1