A 545 N sled is pulled a distance of 385 m. The task is done by pulling on a rope with a force of 1225 N at an angle of 19° with the horizontal. How much work is done in pulling the sled? What is the acceleration in the x direction, assuming that friction is negligible? Assuming the sled started at rest, how long does it take to pull the sled 185 m?

(a) The equation for the work done in stretching the spring from x1 to x2 is ¹/₂K₂Δx².

(b) The work done, in stretching the spring from x1 to x2 is 11.25 J.

(c) The work, necessary to stretch the spring from x = 0 to x3 is 64.28 J.

The work done in stretching the spring is calculated as follows;

W = ¹/₂kx²

W(1 to 2) = ¹/₂K₂Δx²

where;

W(1 to 2)  =  ¹/₂(250)(0.65 - 0.35)²

W(1 to 2)  = 11.25 J

W(0  to 3) = ¹/₂k₁x₁² + ¹/₂k₂x₂² + ¹/₂F₃x₃

where;

W(0  to 3) = ¹/₂(660)(0.35)² + ¹/₂(250)(0.65 - 0.35)² + ¹/₂(105)(0.89 - 0.65)

W(0  to 3) = 64.28 J

Learn more about work done here: https://brainly.com/question/25573309

#SPJ1

The work done by the force on the box 588 Joule.

It is the energy that is stored in an object due to its position relative to some zero position.

According to the question,

Given mass of the box (m)  = 6.0 kg

Given displacement of the box =  10.00 m

Hence , the height of the box  (h) = 10.00 m

Acceleration due to gravity (g)  =  9.8 m/s²

Since ,

The upward force was applied to the box, the box moves up to the height.

Therefore, the work done by the ball is the potential energy gained by the ball.

By using the formula of potential energy

P.E. = mgh

= 6 × 9.8 × 10 Joule  = 588 Joule

As we know .

Work done (W) = Potential energy (P.E.)

Work done (W) = 588 Joule

Thus,  588 Joule is the work done by the force on the box.

Learn more about Potential energy here:

https://brainly.com/question/24284560

#SPJ1

(a)The value of W for the given condition will be 237.3 N.

(b)The distance must the fulcrum be moved to restore balance will be 0.070 m.

A location is established in relation to an object or set of objects in the center of mass. It is the system's average position across all of its components.

Given data;

Weight is applied to the right end of the rod, W₁= 225 N

Rod's weight,W₂ = 255

W₃ is the Weight at "x" distance from the left end.

x1  is the location of W₁ with respect to the left end, where L = 1.80 m

m is the location of the rod's center of mass from the left end.

The position of W from the left end; x₃ = 50 cm = 0.50 m

Xcm is the position of the center of gravity of the rod at the fulcrum from the left end;

Given that the fulcrum is balanced in this situation, the rod's center of gravity will be there.

Xcm= L - 75 cm

Xcm=1.80 m - 0.75 m

Xcm= 1.05 m

The value of x₂

x₂= 1.80 m/2 = 0.90 m

Currently, the horizontal center of gravity is determined by

[tex]\rm X_{cm} =\frac{ (W_1x_1 + W_2x_2 + W_3*x_3)}{(W_1 + W_2 + W_3)}[/tex]

Substitute the values we get;

[tex]\rm 1.05 = \fraca{ (225 \times 1.80 + 255\times 0.90 + W\times 0.50)}{(225 + 255 + W)}\\\\ W = \frac{ (225\times 1.80 + 255\times 0.90 - 480 \times 1.05)}{(1.05 - 0.50)}\\\\ W = 237.3 \ N[/tex]

After moving the fulcrum 20.0 cm to the right,

The location of the W from the left end;

x₃ = .50 cm + 20 cm

x₃  = 70 cm

x₃  = 0.70 m

W₁, W₂, W, x₁, and x₂ have fixed values. Therefore, based on these values, the new center of gravity will be:

[tex]\rm X_{cm} =\frac{ (W_1x_1 + W_2x_2 + W_3*x_3)}{(W_1 + W_2 + W_3)}[/tex]

[tex]\rm X_{cm} = \frac{(225\times 1.80 + 255\times 0.90 + 237.3\times 0.70)}{(225 + 255 + 237.3)}\\\\ X_{cm} = 1.12 m[/tex]

Fulcrum must be shifted by;

Y = (1.12 - 1.05)

Y= 0.070 meters.

W has been moved in the appropriate direction, thus the fulcrum should likewise be moved in the appropriate direction.

Hence, the value of W for the given condition will be 237.3 N. and the distance must the fulcrum be moved to restore balance will be 0.070 m.

To learn more about the center of mass refer;

https://brainly.com/question/8662931

#SPJ1

The displacement is determined to be 5.11 m after every direction is plotted on the page.

Displacement is defined as the shortest distance between the two points.

The steps in which Jerry walks;

5m to East

6m to N 60' E,

16m to N30'W,

Turn

3√3 m to the south.

Each and every direction is plotted on the page and obtained that the displacement is found as 5.11 m.

To learn more about displacement refer to the link;

https://brainly.com/question/10919017

#SPJ1

Answer:  Solar Photovoltaic (PV) cells generate electricity by absorbing sunlight and using that light energy to create an electrical current. There are many PV cells within a single solar panel, and the current created by all of the cells together adds up to enough electricity to help power your school, home and businesses.

                              --Cited from Solar Schools

the answer is in the picture ok

good luck don't worry it's a correct

#carry on learning

Answer:

i think the answer is 20.......

A. The average velocity of the particle in the time interval t₁=2sec and t₂=3sec is 4 i m/s.

B. The velocity and acceleration at any time t is  4t i +1 j and 4i.

C. The average acceleration in the time interval given in part (a) is 4

Acceleration can be defined as the rate change of velocity with time.

acceleration a = (Δv) / (Δt)

Given the following equation shows the position of a particle in time t, x=at² i + bt j

where t is in second and x is in meter. a=2m/s², b=1m/s.

A. Velocity is time rate of change of displacement.

V = dx/dt

V = d/dt (2t² i + 1t j)

V = 4t i +1 j

Velocity in time interval,

At  t₁=2sec , V₂= 4x2 i + 1 j = 8 i + 1 j

At  t₂=3sec, V₃ = 4x3 i + 1 j = 12 i + 1 j

Average velocity in time interval t₁=2sec and t₂=3sec is

, V₃ - V₂ = (12 i + 1 j) - ( 8 i + 1 j )

Average velocity =  4 i

B. Velocity at time t, is

V(t) = V = 4t i +1 j

Acceleration a = dV/dt

a(t) = d/dt (4t i +1 j)

a(t) = 4 i +0 j

C. Average acceleration in time interval t₁=2sec and t₂=3sec is

a = 4 m/s²

Learn more about acceleration.

https://brainly.com/question/12550364

#SPJ1

(a) The equilibrant C for force of vector A and B is 3.43 N.

(b) The equilibrant C for fx of vector A and B is 2.1 N.

(c) The equilibrant  C, for fy of vector A and B is 2.12 N.

An equilibrant force is a single force that will bring other bodies into equilibrium.

Vector A: mass = 0.2 kg, θ = 20⁰

Vector B: mass = 0.15 kg, θ = 80⁰

Fx = mg cosθ

Fy = mg sinθ

where;

Force of A due to its weight

F(A) = mg

F(A) = 0.2 x 9.8 = 1.96 N

Fx = (0.2 x 9.8) cos(20) = 1.84 N

Fy = (0.2 x 9.8) sin(20) = 0.67 N

R = √(0.67² + 1.84²)

R = 1.96 N

Force of B due to its weight

F(B) = mg

F(B) = 0.15 x 9.8

F(B) = 1.47 N

Fx = (0.15 x 9.8) cos(80) = 0.26 N

Fy = (0.15 x 9.8) sin(80) = 1.45 N

R = √(0.26² + 1.45²)

R= 1.47 N

Equilibrant force:

Force, C = 1.96 N + 1.47 N

Force, C = 3.43 N

Equilibrant FX:

Fx, C = Fx(A) + Fx(B)

Fx, C = 1.84 N + 0.26 N = 2.1 N

Equilibrant FY:

Fy, C = Fy(A) + Fy(B)

Fy, C =0.67 N + 1.45 N = 2.12 N

Learn more about equilibrant force here: https://brainly.com/question/8045102

#SPJ1

Answer:(note that values will be on top in small)

cobalt :- 60Co

potassium :- 40K

neon :- 24Ne

lead :- 208Pb

The term for a pair of forces described by Newton's third law is action-reaction pair. Details about Newton's law can be found below.

Newton's third law of motion states that for every action, there is an equal and opposite reaction.

This law proposed that when an object 1 acts on object 2 with a force of a particular magnitude, object 2 also acts on object 1 with an opposite force of same magnitude.

Therefore, it can be said that the term for a pair of forces described by Newton's third law is action-reaction pair.

Learn more about Newton's third law at: https://brainly.com/question/23772134

#SPJ1

Answer:

337k

Explanation:

First, let us find the difference between the given two temperatures.

Difference = 85°C - 21°C

                  = 64°C

And now we have to write the temperature in kelvins.

To convert Celcius to Kelvins you can add 273 to the temperature in Celcius.

Let us find it now.

64°C + 273 = 337k

Therefore,

64°C ⇒ 337k

R=√20²+40²+2.20.40 cos 50

R=55 N

R/sin β = F/sin α

55/sin 50 = 40/sin α

α = 33°

Answer:

0.6192

Explanation:

1.44 x 0.430=0.6192

It is important to remember "association", instead of "causation" when discussing correlations because associations can be used to make predictions.

The associations among variables have a fundamental value in science because they can determine how such variables behave in hypothetical situations.

Moreover, correlation only indicates a type of association between variables and therefore it is less informative.

In conclusion, it is important to remember "association", instead of "causation" when discussing correlations because associations can be used to make predictions.

Learn more about associations in science here:

https://brainly.com/question/26998752

#SPJ1

Answer:

kg

Explanation:

the highr and jebad to kilogram mizans

Answer:

w=m×g

Explanation:

w is given and take g as 9.8m/s^2

Answer:

liquid turns into vapor when the liquid molecules achieves the energy to break down the form or when gets highly excited. The temp required for this is called latent heat of vaporization. As the liquid molecules attain this energy through heat it suddenly changes form into vapor , and when the heat is continued , molecule after molecule receives this energy and changes to vapor .So if you continue heating the liquid all the liquid will change form to vapor state leaving residue , ie the dissolved particles .

liquid turns into vapor when the liquid molecules achieves the energy to break down the form or when gets highly excited. The temp required for this is called latent heat of vaporization. As the liquid molecules attain this energy through heat it suddenly changes form into vapor , and when the heat is continued , molecule after molecule receives this energy and changes to vapor .So if you continue heating the liquid all the liquid will change form to vapor state leaving residue , ie the dissolved particles .I’m no expert but this is what i think happens …

Answer:

cost=$15

Explanation:

given;

P= 2100 W

t= 12'= 720 sec=0.2h

V= 120 V

required;

Energy?

cost?

solution;

Energy(kWh) = power*time(in hour)

E=2100*0.2= 420 kWh

cost= 420 kWh* $0.25/kWh

cost= $15

since blow dryer use 120-V

The average force exerted on the ball by the glove will be 129 N.

Force is defined as the push or pulls applied to the body. Sometimes it is used to change the shape, size, and direction of the body. Force is defined as the product of mass and acceleration. Its unit is Newton.

Given data;

Mass,(m)=0.15-kilogram

Initial speed,u=43 meters per second

Time period,t= 0.050 seconds

Average force exerted,F=?

The average force exerted on the ball by the glove is;

[tex]\rm F = m\frac{v-u}{t} \\\\ F=0.15( \frac{43-0}{0.050} )\\\\ F=129 N[/tex]

Hence, the average force exerted on the ball by the glove will be 129 N.

To learn more about the force refer to the link;

https://brainly.com/question/26115859

#SPJ1

The amount of current in the blood sample is determined as 0.12 A.

The current in the blood is calculated by applying Ohm's law as shown below;

V = IR

where;

From resistivity chart corresponding to 0.98 g/L, resistance, R = 7.4

I = V/R

I = 0.9 /7.4

I = 0.12 A

Learn more about current here: https://brainly.com/question/25537936

#SPJ1

The drag coefficient (C) is determined from terminal velocity, density of the medium, projected area and mass of the object.

Terminal velocity is the constant speed of a freely falling object when the resistance of the medium through which it is falling prevents further acceleration.

The magnitude of terminal velocity is calculated as;

[tex]V_T = \sqrt{\frac{2mg}{\rho A C} }[/tex]

where;

Thus, the drag coefficient (C) is determined from terminal velocity, density of the medium, projected area and mass of the object.

Learn more about terminal velocity here: https://brainly.com/question/13655133

#SPJ1

Answer:

Case 1: Balancing length when cell is shunted l1 = 150 cm = 1.5 m, Value of shunt = R = 5 ohm. Case 2: Balancing length when cell is shunted l1 = 175 cm = 1.75 m, Value of shunt = R = 10 ohm. Example 06: A cell balances against a length of 250 cm on potentiometer wire when it is shunted by a resistance of 10 ohms

The initial speed of the object with mass "m" is 4.79 m/s and the initial speed of the object with mass "2m" is 1.81 m/s.

The initial speed of the two masses is calculated by applying the principle of conservation of linear momentum as follows;

m₁u₁ + m₂u₂ = v(m₁ + m₂)

[tex]m_1u_1sin(\theta_1) + m_2u_2sin(\theta_2) = (m_1 + m_2)vsin(\theta_3)\\\\mu_1sin(0) + 2mu_2sin(90) = (m + 2m)(2)sin(37)\\\\2mu_2 = 3.61m\\\\u_2 = \frac{3.61 m}{2m} \\\\u_2 = 1.81 \ m/s[/tex]

[tex]m_1u_1sin(\theta_1) + m_2u_2sin(\theta_2) = (m_1 + m_2)vsin(\theta_3)\\\\mu_1cos(0) + 2mu_2cos(90) = (m + 2m)(2)cos(37)\\\\mu_1 = 4.79 m\\\\u_1 = 4.79 \ m/s[/tex]

Thus, the initial speed of the object with mass "m" is 4.79 m/s and the initial speed of the object with mass "2m" is 1.81 m/s.

Learn more about initial speed here: https://brainly.com/question/24493758

#SPJ1

hi brainly user! ૮₍ ˃ ⤙ ˂ ₎ა

⊱┈────────────────────────┈⊰

[tex]\large \bold {ANSWER}[/tex]

Considering that the pulley is fixed, the force applied should be equal to the weight of the object - of 400N.

[tex]\large \bold {EXPLANATION}[/tex]

Pulleys or pulleys are mechanical tools used to assist in the movement of objects and bodies. There are two types of pulleys: fixed and movable. While the fixed pulley changes the direction of force, the moving pulley helps to decrease the force needed to move the object or body in question.

As the statement only tells us a pulley, we must consider that it is fixed, because generally when it is mobile, this information is highlighted in the question.

In this way, a fixed pulley only changes the direction of the applied force. Thus, the force must have the same magnitude as the weight of the object to be moved. If the bucket weighs 400N, the force applied to the pulley must be 400N.

Therefore, having a fixed pulley, the force applied must be equal to the weight of the object, and will be 400N.

Answer:

V = ?

C = 3 × 10^8

wavelength = 2.10 × 10^-7

wavelength = C/V

V = C/wavelength

V = 3 × 10^8/2.10 × 10^-7

V = 1.43 × 10^ 15

The rod is stretched due to the force of gravitational attraction.

The magnitude of the deformation force on the rod is  -GMm×((1/r² + 1/(L+r)²)

The force of attraction felt by a person which is directed at the center of a planet or Earth is called as the gravity.

The force of attraction is directly proportional to the product of masses of the object and inversely proportional to the square of distance between them.

F = GMm/R²

Given are two small (green) objects, each of mass m, are separated by a solid, massless rod of length L. They are located so that one of the objects is located at a distance of r away from the center of a uniform spherical planet with mass M.  Assume that m is very small so that you can ignore the gravitational force between the two small (green) objects.

Let the mass closer to the planet is A and the other is B

FA = Force on planet A = -GMm/r²

FB = Force on planet B = -GMm/(L+r)²

Net Force on the rod is given by the addition of the individual forces.

Fnet= FA + FB = -GMm/r² -GMm/(L+r)²

Fnet = -GMm×((1/r² + 1/(L+r)²)

Thus,  the magnitude of the deformation force on the rod is derived above.

A experience more force than B, so A will stretch out from B. Hence the force is stretching the rod.

Learn more about gravity.

brainly.com/question/4014727

#SPJ1

Hello!

Recall the period of an orbit is how long it takes the satellite to make a complete orbit around the earth. Essentially, this is the same as 'time' in the distance = speed * time equation. For an orbit, we can define these quantities:

[tex]d = 2\pi r[/tex] ← The circumference of the orbit

speed = orbital speed, we will solve for this later

time = period

Therefore:

[tex]T = \frac{2\pi r}{v}[/tex]

Where 'r' is the orbital radius of the satellite.

First, let's solve for 'v' assuming a uniform orbit using the equation:
[tex]v = \sqrt{\frac{Gm}{r}}[/tex]

G = Gravitational Constant (6.67 × 10⁻¹¹ Nm²/kg²)

m = mass of the earth (5.98 × 10²⁴ kg)

r = radius of orbit (1.276 × 10⁷ m)

Plug in the givens:
[tex]v = \sqrt{\frac{(6.67*10^{-11})(5.98*10^{24})}{(1.276*10^7)}} = 5590.983 m/s[/tex]

Now, we can solve for the period:

[tex]T = \frac{2\pi (1.276*10^7)}{5590.983} =\boxed{ 14339.776 s}[/tex]