4. An open cylinder is filled with water to a height of 0.5m. What is the absolute pressure on the base area? s ​

Answers

Answer 1

Explanation:

To find the absolute pressure on the base area of the cylinder, we need to use the formula for absolute pressure:

P(abs)​=P(atm​)+P(gauge)​

where P(abs)​ is the absolute pressure, P(atm​) is the atmospheric pressure, and P(gauge​) is the gauge pressure.

The gauge pressure is the pressure exerted by the water column on the base area. It depends on the height and density of the water column, and can be calculated using the formula:

P(gauge​)=ρgh

where ρ is the density of water, g is the acceleration due to gravity, and h is the height of the water column.

Given that the height of the water column is 0.5 m, and assuming that the density of water is 1000 kg/m^3 and the acceleration due to gravity is 9.8 m/s^2, we can find the gauge pressure as:

P(gauge​)=1000×9.8×0.5

P(gauge)​=4900 Pa

The atmospheric pressure at sea level is approximately 101325 Pa. Therefore, we can find the absolute pressure on the base area as:

P(abs​)=101325+4900

P(abs)​=106225 Pa

Hence, the absolute pressure on the base area of the cylinder is 106225 Pa.

Donate me if you want: https://www.buymeacoffee.com/imstillsid


Related Questions

Martha is decorating a tree in her backyard with plastic eggs in preparation for easter. she
hangs two eggs side by side so that their centers are 0.40 m apart. martha rubs the eggs
to shine them up and in doing so, places a charge on each egg. the egg on the left
acquires a charge of 6.0 x 106 c while the egg on the right is charged with 4.0 x 10°c.
what is the electric field at a point 0.15 m to the right of the egg on the left?

Answers

The electric field at a point 0.15 m to the right of the egg on the left is: 1.35 x 10⁷ N/C.

To find the electric field at a point 0.15 m to the right of the egg on the left, we can use Coulomb's  law. Coulomb's law states that the electric force between two charged objects is proportional to the product of their charges and inversely proportional to the square of the distance between them. The formula for Coulomb's law is:

F = k * (q1 * q2) / r²

Where F is the electric force, k is Coulomb's constant (9.0 x 10⁹ Nm²/C²), q1 and q2 are the charges of the two objects, and r is the distance between them.

In this case, we want to find the electric field at a point 0.15 m to the right of the egg on the left. To do this, we can first find the electric force between the two eggs, and then use that to find the electric field at the desired point.

The electric force between the two eggs can be found using Coulomb's law:

F = k * (q1 * q2) / r²
F = 9.0 x 10⁹ * (6.0 x 10⁻⁶) * (4.0 x 10^-6) / (0.4)²
F = 1.35 x 10⁻² N

Now that we have the electric force, we can find the electric field at the desired point using the formula:

E = F / q_test

Where E is the electric field and q_test is the test charge (assumed to be positive and very small). In this case, we can assume that the test charge is 1.0 x 10^-9 C.

E = F / q_test
E = 1.35 x 10⁻² / (1.0 x 10⁻⁹)
E = 1.35 x 10⁷ N/C

Therefore, the electric field at a point 0.15 m to the right of the egg on the left is 1.35 x 10⁷ N/C. This means that if we were to place a positive test charge of 1.0 x 10⁻⁹ C at that point, it would experience a force of 1.35 x 10⁻² N in the direction of the egg on the left.

To know more about electric field, refer here:

https://brainly.com/question/31216983#

#SPJ11

One form of energy that exists in every system but is difficult to quantify is heat. Think about how we formulated our spring resonance model. Did we account for the heat energy in the medium? why do we need to?.

Answers

No, our spring resonance model did not account for the heat energy in the medium. Heat energy is generated due to the friction between the spring and the medium during the oscillation of the spring.

This energy is dissipated into the medium in the form of thermal energy, causing the amplitude of the oscillation to decrease over time.

In order to develop an accurate and complete model of the spring resonance, we need to account for the heat energy generated during the oscillation.

This is important because the amount of heat generated depends on the mechanical properties of the medium and the frequency and amplitude of the oscillation, and can have a significant impact on the behavior of the system.

By accounting for heat energy, we can better understand the dynamics of the system and predict how it will behave over time.

This can be particularly important in practical applications, such as in engineering and design, where we need to know how a system will perform under different conditions and over long periods of time.

To know more about thermal energy refer here

brainly.com/question/30859008#

#SPJ11

in the diagram below are shown snapshots of the changing electric and magnetic field that make up a beam of light. each frame has a time stamp, given in terms of the period of oscillation of the fields. in what direction is the beam of light moving?

Answers

Answer:

yes

Explanation:

Un globo de helio se utiliza para elevar una carga de 110 N. El peso de la cubierta del globo

es de 50 N y su volumen cuando está totalmente hinchado es de 32 m3
. La temperatura del

aire es de 0 °C, y la presión atmosférica es de 1 atm. El globo se infla con el gas helio

suficiente para que la fuerza neta sobre él y su carga sea de 30 N. Despreciar los cambios de

temperatura con la altura.

A. Encuentre una expresión para la densidad de un gas ideal.

B. Usando la expresión anterior y la ecuación d

d

= −, encuentre una expresión para

la variación de la presión de la atmósfera considerando que toda la atmósfera tiene

una temperatura uniforme de 0 °C, y una masa molecular = 28,8×10-3

kg/mol.

C. Encuentre el volumen del globo a una presión de 1 atm capaz de levantar el globo

con la una fuerza de 30 N. (aire = 1,293 kg/m3 y He = 0,179 kg/m3

).

D. Encuentre el número de moles de helio que debe contener el globo para flotar con las

condiciones del inciso c).

E. Explique que debe de pasar con el globo al comenzar a subir, si la temperatura gas se

mantiene constante e igual a la temperatura de la atmósfera.

F. Encuentre la presión y la altitud en la que el globo se encuentra totalmente hinchado.

G. Explique que debe de pasar con la densidad de un gas ideal al disminuir la presión.

Es posible que el globo se detenga a alguna altura o simplemente se va a escapar de

la atmósfera

Answers

The net force acting on the helium balloon is 3603.2 N.

Calculate the weight of the load and the balloon cover:

Weight = Mass x Gravity

Weight of load = 110 N

Weight of balloon cover = 50 N

Calculate the buoyant force:

Buoyant force = Density x Gravity x Volume

Since helium is lighter than air, it will displace a volume of air equal to its own volume. Therefore, we can use the density of air instead of helium.

Buoyant force = 1.2 kg/m3 x 9.8 m/s2 x 32 m3 = 3763.2 N

Calculate the net force:

Net force = Buoyant force - Weight

Net force = 3763.2 N - 110 N - 50 N = 3603.2 N

To know more about buoyant force, here

brainly.com/question/21990136

#SPJ4

--The completely accurate question is , What is the net force acting on the helium balloon if it is used to lift a load of 110 N and the weight of the balloon cover is 50 N, and its volume when fully inflated is 32 m3? --

Why is the microscopy slide shining with a blue light.

Answers

Fluorescence is a phenomenon where a substance absorbs light at one wavelength and then emits light at a longer wavelength. Some substances, such as certain dyes and proteins, have the ability to fluoresce when excited by light. This fluorescence emission is often in a different color than the original excitation light.

In microscopy, fluorescent dyes or proteins are often used to label or tag specific structures or molecules within a sample. When excited by a specific wavelength of light, they emit a fluorescence signal that can be detected and imaged.

In this case, if the sample on the microscopy slide has been labeled with a fluorescent dye or protein that emits blue light when excited, then the slide would appear to be shining with a blue light when viewed through the microscope.

To know more about Fluorescence refer here

https://brainly.com/question/24228588#

#SPJ11

In a laboratory, nakisha mixes a sodium hydroxide solution with an indicator called phenolphthalein. when combined, they create a pink solution. nakisha wonders if mixing other solutions with phenolphthalein will also create this pink color. how could nakisha use the scientific inquiry process to determine whether mixing other solutions with phenolphthalein will also create a pink color? check all that apply.

Answers

Nakisha can systematically investigate her question and determine the conditions under which: mixing phenolphthalein with other solutions will create a pink color

To determine whether mixing other solutions with phenolphthalein will also create a pink color, Nakisha could use the scientific inquiry process as follows:

1. Ask a question: Nakisha's question is whether mixing other solutions with phenolphthalein will create a pink color.

2. Conduct background research: Nakisha can research the properties of phenolphthalein and its reactions with different types of solutions, such as acids, bases, or neutral substances.

3. Form a hypothesis: Based on the background research, Nakisha can form a hypothesis about the possible outcomes when mixing phenolphthalein with various solutions. For example, she might hypothesize that phenolphthalein will only turn pink when mixed with basic solutions.

4. Design and perform an experiment: Nakisha can set up a controlled experiment where she tests different solutions with phenolphthalein. She can use a variety of solutions, such as hydrochloric acid, acetic acid, sodium hydroxide, ammonia, and distilled water, and observe their reactions with phenolphthalein.

5. Record and analyze data: Nakisha should carefully record the color changes that occur when mixing phenolphthalein with each solution. She can then analyze this data to determine which types of solutions cause a pink color change.

6. Draw conclusions: Based on her experimental results, Nakisha can draw a conclusion about which types of solutions create a pink color when mixed with phenolphthalein. If her hypothesis is supported, she can determine that only basic solutions create a pink color with phenolphthalein.

7. Communicate results: Finally, Nakisha can share her findings with others in the scientific community, either through a lab report, presentation, or published article.

By following the scientific inquiry process, Nakisha can systematically investigate her question and determine the conditions under which mixing phenolphthalein with other solutions will create a pink color.

To know more about phenolphthalein, refer here:

https://brainly.com/question/14037314#

#SPJ11

Two identical vessels are taken and painted white and black respectively. Then the same quantity of water is poured into each one of them. Both the vessels are left in the sun, and the temperature is noted regularly. The water is which vessel is likely to get hotter and why?​

Answers

Answer:

Both the vessels are likely to get heated up to the same temperature since they have the same quantity of water and are exposed to the same amount of sunlight. The color of the vessel (white or black) does not play a significant role in heating the water. However, it is worth noting that black absorbs more light and heat than white due to its higher emissivity and lower reflectivity, but the effect is negligible in this scenario because the water inside the vessels will absorb most of the sunlight regardless of the vessel's color.

Answer:

The black vessel will heat up faster.

Explanation:

When light falls on an object, it can either be absorbed, reflected, or refracted through the object. The color of an object is determined by the wavelengths of light that it absorbs and reflects. A black object appears black because it absorbs all wavelengths of visible light, whereas a white object appears white because it reflects all wavelengths of visible light.

In the case of the two vessels, the black vessel absorbs more of the light and heat from the sun than the white vessel. This is because the black pigment in the paint absorbs a wider range of wavelengths of visible and non-visible light. As a result, more of the energy from the sun is converted into heat, raising the temperature of the water inside the vessel.

In contrast, the white vessel reflects most of the light and heat from the sun, resulting in less energy being absorbed by the water inside the vessel. This is because the white pigment in the paint reflects a wide range of wavelengths of visible light, including the higher energy wavelengths in the ultraviolet and infrared range that contribute to the heating of the vessel.

To read more about the principles of absorption and reflection of light, click the below links:

https://brainly.com/question/3883323

https://brainly.com/question/30935871

At which temperature does the motion of atoms and molecules stop(A) 0 degrease C (B) 0 C (C) 0 degrease K (D) 0 K

Answers

At a temperature of absolute zero, which is 0 Kelvin (K), the motion of atoms and molecules reaches its minimum possible energy state.

Here's why:

1. Temperature is a measure of the average kinetic energy of the particles in a substance. As the temperature decreases, the kinetic energy of the particles also decreases.

2. At extremely low temperatures, the atoms and molecules in a substance will have very low kinetic energy and will move much more slowly.

3. At 0 Kelvin (which is equivalent to -273.15 degrees Celsius), the particles in a substance will have zero kinetic energy and will be in their lowest possible energy state.

4. At this temperature, the particles will still exhibit some motion due to their quantum mechanical nature, but their motion will be highly constrained and they will be effectively motionless.

5. However, it is not currently possible to reach 0 Kelvin in a laboratory setting, as the process of cooling a substance to such a low temperature would require the removal of all energy from the system.

Therefore, the correct answer to the question is (D) 0 K, although it is important to note that the complete cessation of motion is not actually possible.

To know more about kinetic energy refer here

https://brainly.com/question/26472013#

#SPJ11

What is the probability of each possible sample if (a) a random sample of size n=4 is to be drawn from a finite population of size N=12; (b) a random sample of size n=5 is to be drawn from a finite population of size N=22?

Answers

The probability of each possible sample is (sample) = 1/495. The probability of each possible sample is P(sample) = 1/28,544.

(a) The probability of each possible sample of size n=4 being drawn from a finite population of size N=12 can be calculated using the formula:

P(sample) = (number of ways to choose the sample) / (total number of possible samples)

The number of ways to choose a sample of size 4 from a population of size 12 is:

C(12,4) = 12! / (4! * 8!) = 495

The total number of possible samples of size 4 from a population of size 12 is:

C(12,4) = 495

Therefore, the probability of each possible sample is:

P(sample) = 1/495

(b) The probability of each possible sample of size n=5 being drawn from a finite population of size N=22 can be calculated using the same formula:

P(sample) = (number of ways to choose the sample) / (total number of possible samples)

The number of ways to choose a sample of size 5 from a population of size 22 is:

C(22,5) = 22! / (5! * 17!) = 28,544

The total number of possible samples of size 5 from a population of size 22 is:

C(22,5) = 28,544

Therefore, the probability of each possible sample is:

P(sample) = 1/28,544

Learn more about probability here:-

https://brainly.com/question/30034780

#SPJ11

In which spectral class does a white dwarf with a temperature of 10,000 K belong?

Answers

Answer: A white dwarf with a temperature of 10,000 K belongs to the spectral class DA.

White dwarfs are classified based on their atmospheric composition and temperature. The DA spectral class refers to white dwarfs that have a hydrogen-dominated atmosphere. Their spectra exhibit strong hydrogen absorption lines.

The temperature of a white dwarf is a measure of its surface temperature and is related to its age and mass. A white dwarf with a temperature of 10,000 K is relatively hot, indicating that it is likely a young and massive white dwarf.

Explanation:

The system is released from rest with the cable taut, and the homogeneous cylinder does not slip on the rough incline. Determine the angular acceleration of the cylinder and the minimum coefficient of friction for which the cylinder will not slip. The angular acceleration is positive if counterclockwise, negative if clockwise

Answers

The angular acceleration of the cylinder is given by the equation α = g(sinθ-μcosθ)/R. The minimum coefficient of friction for which the cylinder will not slip is equal to the tangent of the angle of the incline, μ = tanθ.

What is Friction?

Friction is a force that opposes relative motion between two surfaces in contact. It arises due to the irregularities in the surfaces of objects that come into contact with each other.

The frictional force acting on the cylinder opposes the motion and can be calculated using the equation f = μN, where N is the normal force and μ is the coefficient of friction. The normal force is given by N = mg cosθ. For the cylinder to remain stationary, the frictional force must be equal to the component of the weight of the cylinder that is parallel to the incline, which is equal to mg sinθ. Therefore, we have μN = mg sinθ, which gives μ = tanθ.

To find the angular acceleration, we need to take into account the frictional force. The net torque acting on the cylinder is given by τ = mg sinθ R - μmg cosθ R, where R is the radius of the cylinder. Substituting the values of τ and I into the equation for angular acceleration, we get α = (mg sinθ - μmg cosθ)/((1/2)m[tex]r^{2}[/tex]). Simplifying this expression, we get α = g(sinθ-μcosθ)/R.

To learn more about Friction, visit;

https://brainly.com/question/24338873

#SPJ4

How can you use ohms law in the form of y=mx+c to calculate the average resistance of an ohmic conductor

Answers

To use Ohm's Law in the form of y=mx+c to calculate the average resistance of an ohmic conductor, you need to understand that Ohm's Law is V=IR, where V is voltage, I is current, and R is resistance.

In this case, y represents voltage (V), m represents resistance (R), x represents current (I), and c is the constant (0 for an ohmic conductor).

Now, you can rewrite Ohm's Law as y=mx+c or V=IR+0. To find the average resistance, you'll need to collect data on voltage (V) and current (I) at various points.

Then, plot these points on a graph with voltage (y-axis) against current (x-axis). The slope (m) of the best-fit line through these points will give you the average resistance (R) of the ohmic conductor.

To learn more about current, refer below:

https://brainly.com/question/13076734

#SPJ11

Which statements best describe magnetic fields? select three options.

Answers

To graphically determine the acceleration due to gravity near Earth's surface using a sphere in simple harmonic motion, the students can follow these steps:

1. Set up the Experiment:

  - Attach the sphere to one end of the string.

  - Attach the other end of the string to the ring stand, allowing the sphere to hang freely.

  - Ensure that the sphere is not touching any other objects and has enough clearance to swing back and forth.

2. Measure the Period:

  - Use a stopwatch or a timer to measure the time it takes for the sphere to complete one full oscillation (swing back and forth).

  - Repeat this measurement multiple times to get accurate and consistent results.

3. Measure the Length:

  - Measure the length of the string from the point of suspension (ring stand) to the center of the sphere.

  - Ensure that the measurement is taken from the resting position of the sphere, not when it is swinging.

4. Calculate the Acceleration due to Gravity:

  - The period of simple harmonic motion (T) is related to the acceleration due to gravity (g) and the length of the pendulum (L) through the formula: T = 2π√(L/g).

  - Rearrange the formula to solve for g: g = (4π²L) / T².

  - Substitute the measured values of the period (T) and length (L) into the formula to calculate the acceleration due to gravity (g).

5. Repeat for Different Lengths (Optional):

  - If time and resources permit, the students can repeat the experiment with different lengths of the string.

  - By measuring the period (T) and length (L) for different setups, they can collect multiple data points to create a graph and further analyze the relationship between period and length.

6. Graphical Analysis:

  - Plot the period (T) on the x-axis and the corresponding calculated acceleration due to gravity (g) on the y-axis.

  - Use the data points obtained from the experiment to create a graph.

  - The slope of the graph represents the square of the reciprocal of the acceleration due to gravity (1/g²), allowing the students to determine the acceleration due to gravity near Earth's surface.

To know more about acceleration refer here

https://brainly.com/question/9415862#

#SPJ11

Base your answer to the following question on the
information below.
A 2.00 × 106

-hertz radio signal is sent a distance of

7.30 × 1010

meters from Earth to a spaceship

orbiting Mars.



Approximately how much time does it take the radio
signal to travel from Earth to the spaceship?

Answers

The time it will take the radio signal to travel from Earth to the spaceship is 36,500 seconds.

What is the time of motion?

The time it will take the radio signal to travel from Earth to the spaceship is calculated as follows;

t = d/v

where;

d is the distance of the signalv is the velocity of the signalt is the time of motion of the signal

The time taken for the signal to travel is calculated as follows;

t = (7.3 x 10¹⁰ m ) / (2 x 10⁶ m/s )

t = 36,500 seconds

Learn more about time of motion of signals here: https://brainly.com/question/21235005

#SPJ1

Calculate the specific heat
of copper is 385 j/kg . °c.
find the change in thermal
energy for a copper pipe
with a mass of 8 kg when it
is heated from 12°c to 21°c.
show your work.

Answers

The change in thermal energy for the copper pipe is 27,720 J.

The formula to calculate the change in thermal energy is:

Q = mcΔT

where Q is the change in thermal energy, m is the mass of the object, c is the specific heat capacity of the material, and ΔT is the change in temperature.

Given:

c (specific heat of copper) = 385 J/kg.°C

m (mass of copper pipe) = 8 kg

ΔT (change in temperature) = 21°C - 12°C = 9°C

Substituting the values in the formula:

Q = mcΔT

Q = (8 kg)(385 J/kg.°C)(9°C)

Q = 27,720 J

To know more about thermal energy refer here

https://brainly.com/question/18989562#

#SPJ11

What are the advantages and disadvantages of series circuits and parallel circuits? Cite examples from the readings to support your answer. Also cite what you may already know about the topic in your answer

Answers

Advantages of Series Circuits is Simple Design: Series circuits are simple and easy to design as they require only a single path for current flow.

Disadvantages of Series Circuits is Single Point of Failure: If any component in a series circuit fails, the entire circuit fails.

Advantages of Parallel Circuits is that there is Independent Operation: Components in a parallel circuit operate independently, meaning that the failure of one component does not affect the operation of others.

Disadvantages of Parallel Circuits is that Complex Design: Parallel circuits are more complex and require more wiring than series circuits.

What is series circuits and parallel circuits?

A series circuit is a circuit in which the components are connected in a single path or loop, so that the same current flows through each component in sequence. The components are connected end-to-end, with the output of one component connected to the input of the next component. In a series circuit, the voltage is shared between the components, and the total resistance is equal to the sum of the individual resistances of each component.

A parallel circuit, on the other hand, is a circuit in which the components are connected in multiple paths, so that the current divides and flows through each component independently. The components are connected side-by-side, with each component having its own path for current flow. In a parallel circuit, the voltage across each component is the same, and the total resistance is less than the individual resistance of each component.

Learn more about Parallel Circuits at:

https://brainly.com/question/80537

#SPJ1

14.Figure shows a magnetic field associated with a rectangular coil directed into the plane of the

paper.

(a) What would be the effect if the coil moves towards right? 1 mark

(b) Name the phenomenon responsible for the above observation. 1 mark

(c)(i) State the rule that is used to determine the direction of current produced in the phenomenon.

Answers

When a rectangular coil moves towards the right in a magnetic field directed would be: the generation of an electromotive force (EMF)

When a rectangular coil moves towards the right in a magnetic field directed into the plane of the paper:

(a) The effect of the coil moving towards the right would be the generation of an electromotive force (EMF) within the coil due to the changing magnetic field. This would result in the production of an electric current within the coil.

(b) The phenomenon responsible for this observation is called electromagnetic induction.

(c)The rule used to determine the direction of the current produced in electromagnetic induction is Fleming's Right Hand Rule. This rule states that if you extend your thumb, index finger, and middle finger of your right hand such that they are perpendicular to each other, then the thumb points in the direction of the motion of the conductor, the index finger points in the direction of the magnetic field, and the middle finger points in the direction of the induced current.

To know more about electromotive force, refer here:

https://brainly.com/question/24182555#

#SPJ11

complete question:

Figure shows a magnetic field associated with a rectangular coil directed into the plane of the paper.

(a) What would be the effect if the coil moves towards right? 1 mark

(b) Name the phenomenon responsible for the above observation. 1 mark

(c)( State the rule that is used to determine the direction of current produced in the phenomenon.

suppose a yo-yo has a center shaft that has a 0.21 cm radius and that its string is being pulled. if the string is stationary and the yo-yo accelerates away from it at a rate of 1.7 m/s2, what is the angular acceleration of the yo-yo in rad/s2?

Answers

Plugging these values into the formula, we get: angular acceleration = (1.7 m/s2) / (0.0021 m) = 809.52 rad/s2

The angular acceleration of the yo-yo is 809.52 rad/s2.

Hello! I'd be happy to help you with your question. To find the angular acceleration of the yo-yo, we'll need to use the following relationship: linear acceleration = radius × angular acceleration.

Given that the yo-yo has a center shaft radius of 0.21 cm (0.0021 m) and a linear acceleration of 1.7 m/s², we can rearrange the formula to find the angular acceleration:

angular acceleration = linear acceleration / radius

Angular acceleration = (1.7 m/s²) / (0.0021 m)

By calculating this, we get:

Angular acceleration ≈ 809.52 rad/s²

So, the angular acceleration of the yo-yo is approximately 809.52 rad/s².

To learn more about : acceleration

https://brainly.com/question/26408808

#SPJ11

(g) two masses mand m2(mı > m2) slide down a rough inclined surface of the same


length and inclination. which of the masses would be the first to get to the bottom? give


reasons for your answer.

Answers

The first mass with a smaller mass would reach the bottom first due to its greater acceleration and less resistance from friction.

According to Newton's second law of motion, the acceleration of an object is directly proportional to the force applied on it and inversely proportional to its mass. Therefore, the object with the smaller mass would experience a greater acceleration than the object with the larger mass. In the scenario presented in the question, both masses are sliding down the same inclined surface with the same length and inclination. However, since the first object has a smaller mass, it would experience a greater acceleration and would therefore reach the bottom first.

Moreover, since the inclined surface is described as rough, there would be friction acting against the motion of the masses, slowing them down. However, the frictional force is also directly proportional to the normal force acting on the object. The normal force is the force exerted by the surface perpendicular to the object's surface. Therefore, the larger object would experience a greater normal force and consequently a greater frictional force, further slowing it down.

For more about acceleration:

https://brainly.com/question/12550364


#SPJ11

Why does an increase in P. D of a thermistor decrease the resistance and increase the temperature???

Answers

An increase in potential difference (P.D.) across a thermistor leads to an: increase in current flow, which generates heat and raises the temperature of the thermistor.

A thermistor is a temperature-sensitive resistor whose resistance varies with temperature changes. When the potential difference (P.D.) across a thermistor increases, more electric current flows through it. As the electric current increases, the electrons in the thermistor gain more kinetic energy and collide more frequently with the lattice structure of the material, which generates heat.

The increased heat raises the temperature of the thermistor. In a negative temperature coefficient (NTC) thermistor, the resistance decreases as the temperature rises. This is because, as the thermistor heats up, the lattice structure of the material expands, allowing more electrons to move more freely and conduct electricity more efficiently. Consequently, the resistance decreases with an increase in temperature.

So, to summarize, an increase in potential difference (P.D.) across a thermistor leads to an increase in current flow, which generates heat and raises the temperature of the thermistor. In an NTC thermistor, this increased temperature causes a decrease in resistance due to the expansion of the lattice structure, which allows electrons to move more freely and conduct electricity more efficiently.

To know more about thermistor, refer here:

https://brainly.com/question/16729324#

#SPJ11

Car A and Car B are driving towards each other. Car A's speedometer shows that it is going 60 mph. Car B's speedometer shows that it is going 70 mph. How fast is Car A going relative to a passenger in Car B?

Answers

The speed of Car A going relative to a passenger in Car B is 10mph

Speed calculation.

The relative speed of Car A and Car B since they are driving towards each other is given by;

V = 60+70=130mph

In order to find the speed of Car A going relative to a passenger in Car B we need to subract speed of car B.

vA/vB= va-vB

60-70= -10mph

The negative sign indicate that car A is travelling in opposite direction relative to car B.

Therefore, The speed of Car A going relative to a passenger in Car B is 10mph

Learn more about speed below.

https://brainly.com/question/26046491

#SPJ1

Who wrote the principles of scientific management?.

Answers

The Principles of Scientific Management were written by the American engineer and management consultant Frederick Winslow Taylor in 1911.

Taylor sought to increase efficiency in the workplace by analyzing and streamlining the tasks required of each job. He believed that by breaking down each job into its component parts, studying the time it took to complete each task, and optimizing the steps involved, productivity could be significantly increased.

Taylor also argued that workers should be motivated through incentives and rewards rather than punishments. He suggested that employers should offer higher wages to employees who can produce more than the standard output, thus encouraging higher productivity.

Finally, Taylor proposed that managers should be trained in scientific methods of management so that they could understand and direct their workers effectively.

The Principles of Scientific Management laid the foundations for much of the modern management practices employed today.

Know more about Frederick Winslow Taylor in 1911 here

https://brainly.com/question/19091865#

#SPJ11

Final answer:

The Principles of Scientific Management were written by Frederick Winslow Taylor. He developed this management theory to improve labor productivity, defining four key areas: science, harmony, cooperation, and personnel development, which marked a significant influence on modern management.

Explanation:

The Principles of Scientific Management were written by Frederick Winslow Taylor in the early 20th century. He introduced this management theory to improve economic efficiency, particularly labor productivity. Taylor's principles of management dictated four key areas: Science, not rule-of-thumb; Harmony, not discord; Cooperation, not individualism; and Development of each and every person to his or her greatest efficiency and prosperity. His ideas greatly influenced the evolution of modern management as we understand it today.

Learn more about Principles of Scientific Management here:

https://brainly.com/question/31872536

#SPJ12

Toad and Toadette just had their first little toadstool! Toad's family is known to be purebred dominant for red spots on their white cap. Everyone was shocked when Little Toad was born with a white cap with white spots instead of red. Toadette is very upset as she thinks the Mushroom Kingdom Hospital accidentally switched babies. Is this true? Did the hospital really switch babies? Choose either "yes" or "no" and defend your answer.

Answers

No, the hospital did not switch babies.

Recessive genes

The reason for Little Toad's white cap with white spots is most likely due to a recessive gene that was inherited from both parents. This means that even though Toad is purebred dominant for red spots on white cap, he could still carry a recessive gene for white spots.

Similarly, Toadette may also carry the same recessive gene. If both parents carry the recessive gene and both pass it on to their offspring, then the offspring will display the recessive trait. Therefore, it is possible for Little Toad to inherit the recessive gene from both parents and display the white spots on the white cap.

In other words, the hospital did not switch babies as the white cap with white spots on Little Toad is most likely due to the inheritance of recessive genes from both parents.

More on the inheritance of recessive genes can be found here: https://brainly.com/question/15481938

#SPJ1

A honey bee's wings beat at 230 beats


per second. If the speed of sound in air


is 340 m/s, what is the wavelength of the


sound wave?


1 pt: knowns/unknown


1 pt: write the equation


1 pt: solve


1 pt: correct answer (you can round to


one decimal place)


please answer right away

Answers

The wavelength of the sound wave is approximately 1.5 meters.

1 pt: Knowns/Unknown:
- Frequency (f) = 230 beats per second (Hz)
- Speed of sound (v) = 340 m/s
- Wavelength (λ) = Unknown

1 pt: Write the equation:
The equation relating the speed of sound, frequency, and wavelength is: v = f * λ

1 pt: Solve:
To find the wavelength (λ), rearrange the equation: λ = v / f

1 pt: Correct answer (rounded to one decimal place):
λ = 340 m/s / 230 Hz ≈ 1.5 m

The wavelength of the sound wave is approximately 1.5 meters.

To learn more about sound, refer below:

https://brainly.com/question/29707602

#SPJ11

Primary and secondary succession comic strip using succession interactive

Answers

The comic strip shows how primary and secondary succession lead to the creation of a new ecosystem after a disturbance, emphasizing their significance in ecological resilience and ecosystem restoration.

Primary and secondary succession are ecological processes that occur when a disturbance, such as a fire or a volcanic eruption, clears an area of its existing vegetation.

Primary succession occurs when there is no soil or organic matter left, while secondary succession occurs when there is soil or organic matter remaining. To demonstrate these processes, a comic strip can be created using the "Succession Interactive" tool.

The comic strip can begin with a depiction of a landscape that has been cleared of all vegetation due to a disturbance, representing primary succession.

As time passes, lichens and mosses begin to colonize the area, breaking down the rock and creating soil. Over time, grasses, shrubs, and eventually trees begin to grow, and the ecosystem becomes more complex.

The second part of the comic strip can depict a landscape that has experienced a less severe disturbance, representing secondary succession.

In this case, the soil and organic matter are still present, and plants such as grasses and shrubs begin to regrow quickly. As the ecosystem becomes more established, larger plants like trees begin to grow, and the ecosystem becomes more diverse and complex.

Overall, the comic strip demonstrates how both primary and secondary succession result in the establishment of a new, thriving ecosystem following a disturbance. It highlights the importance of these processes in ecological resilience and the restoration of damaged ecosystems.

To know more about ecosystem refer here:

https://brainly.com/question/31459119#

#SPJ11

Complete Question:

Explain primary and secondary succession comic strip using succession interactive.

A cubic container is at rest on a rough horizontal warehouse floor. if the mass of the container is 60.6 kg and the coefficient of static friction is 0.570, determine the minimum horizontal force that must be applied to the top of the container to cause tipping.

Answers

To determine the minimum horizontal force that must be applied to the top of the container to cause tipping, we need to use the concept of torque. Torque is a force that causes rotation and is defined as the product of the force and the perpendicular distance from the point of rotation. In this case, the point of rotation is the edge of the container in contact with the floor.

Firstly, we need to find the weight of the container which is given by the mass times the acceleration due to gravity (9.8 m/s^2). Thus, the weight of the container is 593.88 N.

Next, we need to find the maximum force of static friction that the floor can exert on the container to prevent it from tipping. This is given by the coefficient of static friction (0.570) times the weight of the container (593.88 N). Thus, the maximum force of static friction is 338.73 N.

To cause tipping, a force must be applied to the container in such a way that it produces torque. This torque must overcome the torque produced by the force of static friction. The torque produced by the force of static friction is equal to the product of the maximum force of static friction and the distance from the point of rotation to the line of action of the force of static friction, which is half the height of the container (0.5 m).

Thus, the minimum horizontal force that must be applied to the top of the container to cause tipping is the force required to produce a torque equal to the torque produced by the force of static friction. This is given by the equation:

force x distance = maximum force of static friction x 0.5
Solving for force, we get:
force = (maximum force of static friction x 0.5) / distance

Substituting the values, we get:
force = (338.73 N x 0.5) / 0.6 m
force = 282.27 N

Therefore, the minimum horizontal force that must be applied to the top of the container to cause tipping is 282.27 N.

In conclusion, the minimum horizontal force required to tip the container depends on the coefficient of static friction and the distance between the point of rotation and the line of action of the force. In this case, the force required is 282.27 N, which must be applied at a distance of 0.6 m from the point of rotation.

To know more about horizontal force refer here

https://brainly.com/question/2037071#

#SPJ11

what happens to the core of a high-mass star after it runs out of hydrogen? what happens to the core of a high-mass star after it runs out of hydrogen? it shrinks and heats up. it shrinks and cools down. helium fusion begins right away.

Answers

The fate of the core depends on the mass of the star and the balance between gravity and the pressure created by the nuclear reactions.

When a high-mass star runs out of hydrogen fuel in its core, it starts to undergo significant changes. Initially, the core of the star shrinks and heats up, as the gravitational pull becomes stronger due to the decreased energy output from the nuclear fusion reactions. This increase in temperature and pressure allows for helium fusion to begin, which produces heavier elements such as carbon and oxygen.

The process of helium fusion is much faster than hydrogen fusion, and it causes the core to heat up even more. This can lead to further fusion reactions, creating elements up to iron. The star's outer layers, however, continue to expand and cool, causing it to become a red giant.

Ultimately, the core of a high-mass star will either continue to fuse heavier elements until it can no longer sustain nuclear reactions, leading to a supernova explosion, or it will collapse under its own weight to form a black hole or a neutron star.

To learn more about : mass

https://brainly.com/question/86444

#SPJ11

Pleasee help mee
a circular coil of 100 turns and cross-sectional area of 2. 0 cm² carrying a 50 mA current is placed in a magnetic field of 0. 5 T parallel to the plane of the coil. Calculate the torque acting on the coil?

Answers

A circular coil of 100 turns and a cross-sectional area of 2. 0 cm² carrying a 50 mA current is placed in a magnetic field of 0. 5 T parallel to the plane of the coil. The torque acting on the coil is 0.01 Nm.

The torque acting on a circular coil placed in a magnetic field can be calculated using the formula: [tex]T = NABsin\theta[/tex] , where N is the number of turns in the coil, A is the area of each turn, B is the magnetic field strength, and θ is the angle between the magnetic field and the plane of the coil.

Substituting the given values, we have

[tex]T = (100)(2.0 \times 10^{-4} m^2)(0.5 T)sin90^{\circ}[/tex]

T = 0.01 Nm.

Therefore, the torque acting on the coil is 0.01 Nm.

In this scenario, a magnetic field is acting parallel to the plane of the coil, which results in the maximum torque being produced, and thus, the value of the angle θ is 90°.

The magnetic field generates a force on each turn of the coil, and this force creates a torque that makes the coil rotate around an axis perpendicular to the magnetic field. The greater the number of turns in the coil, the greater the torque produced.

To know more about torque refer here:

https://brainly.com/question/28220969#

#SPJ11

Two electrons (-1.6 x 10-1°c) in an atom are separated by 3.4 x 10-11 m. what is the electrostatic force


between them? is it attractive or repulsive?

Answers

The electrostatic force between the electrons is approximately 2.31 x 10⁻²⁸ N, acting in a repulsive manner.

To find the electrostatic force between the two electrons, we will use Coulomb's Law, which states that the electrostatic force (F) between two charged particles is directly proportional to the product of their charges (q1 and q2) and inversely proportional to the square of the distance (r) between them. Mathematically, this is represented as:

F = (k * q1 * q2) / r²

Where k is Coulomb's constant, approximately equal to 8.99 x 10⁹ Nm²/C². In this problem, both electrons have a charge of -1.6 x 10⁻¹⁹ C, and they are separated by a distance of 3.4 x 10⁻¹¹ m. Plugging these values into the equation, we get:

F = (8.99 x 10⁹ Nm²/C² * (-1.6 x 10⁻¹⁹ C) * (-1.6 x 10⁻¹⁹ C)) / (3.4 x 10⁻¹¹ m)²

Calculating the force:

F ≈ 2.31 x 10⁻²⁸ N

Since both electrons have negative charges, the electrostatic force between them is repulsive. This is because like charges repel each other, while opposite charges attract. In this case, the two electrons have the same negative charge, which causes them to repel one another.

For more about electrostatic force:

https://brainly.com/question/9774180


#SPJ11

2. A ball of mass 240 g is moving through the air at 20.0 m/s with a gravitational potential energy of 70 J. With what speed will the ball hit the ground?

Answers

The speed at which the ball hit the ground is 31.36 m/s.

What is speed?

Speed is the rate of change of distance.

To calculate the speed at which the ball hit the ground, we use the formula below

Formula:

v² = u²+2E/m ................ Equation 1

Where:

v = Final speed of the ballu = Initial speed of the ballE = Energym = Mass of the ball

From the question,

Given:

u = 20 m/sm = 240 g = 0.24 kgE = 70 J

Substituite these values into equation 1

v² = 20²+(2×70)/0.24v² = 400+583.333v² = 400+583.333√v² = √983.33v = 31.36 m/s

Learn more about speed here: https://brainly.com/question/29110645

#SPJ1

Other Questions
A graph is shown.6987654321100 1 2 3 4 5 6 7 8 9 10Which ordered pair describes a point that should be removed from the graph so that the graph represents a function? Let functions f and g be defined over the real numbers as f(x)=x+3 and g(x) = 4x. It follows that f(g(x)) = ?F. 12xG. 4x+3H. 5x+3J. 4x +3K. 4x + 12x A compound has the formula X2Fe(CN)6 12H2O, where X is an unknown element. If the compound is 45.34% water by mass, what is the identity of element X? Has tobacco use increased/decreased among high school students?What are the effects of tobacco on physical health you have observed or come across? Pick an answer and explain why the others are incorrect. 1. What aspect of electricity did Ben Franklins experiment demonstrate?2. What evidence exists that he actually performed this experiment?3. Why do some scientists and historians doubt this story?4. Do you think that Franklin actually performed this experiment? Why or why not?5. Did anyone else try repeating this experiment? If so, identify the person and when they did so. Then, describe the experiments results. 6. Examine the postings of your classmates, and post any additional data/evidence that you found that might have been overlooked I dont know how to do this, can someone please tell me how with the steps. 44How does Trina's mood change from the beginning to the end of "Excerpt from Katerina'sWish"? Use two details from the story to support your response. While volunteering at a community soup kitchen, Drew sees that a popular department store has just donated a box of new winter coats to be distributed. Drew has a coat but there are some designer names on the coats in this box! If the coats are meant to be given away, is it ok for Drew to take one? Analyze the ethics involved in this situation. Then, make a recommendation as to how Drew should proceed What is the difference between turtles and tortoises. what are negative solutions to water pollution? Rent control keeps prices of housing below market rates. Which of these is an unintended consequence of rent control?. Please help! How do the words and phrases from question 3 impactthe overall meaning of the text?A The selected words demonstratethat being the first in your family toattend college is a greataccomplishment.B The selected words reveal that whilemany might applaud students whoare the first in their families to attendcollege, many of them spend theircollege years and beyond feeling likethey do not belong or deserve to bethere.C The selected words reveal that thereare some first-generation collegestudents who accept the challengesof being the first to attend collegeand go on to do great things insociety.D The selected words propose thathigh-achieving students should thinktwice before considering being the The mean of data set A is 42. The mean of data set B is 47. The mean absolute deviation (MAD) of both data sets is 2. 5. What is the difference of the means as a multiple of the MAD? The difference of the means is ______ times the MAD. What is the distance between the bakery (b) and the library (c)? explain using coordinate subtraction. Fareed is making a rectangular garden in his backyard. He wants the length of the garden to be 5 feet longer then the width. which type of function can Fareed write to model the possible areas of his garden? please help mea gift box is in the shape of a trapezoidal prism with base lengths of 7in by 5in by 4in the height of the gift box is 8in what is the volume????? Determine the TONE of the text and explain how specific words and phrases, and SETTING descriptions contribute to the tone.This is for the book Deck Z if anyone has read it..... 100 POINTS!!!!!! please answer will give brainliest If the length of each side of the right triangle shown on the grid is measured in cm; find the area of the triangle: 25 cm2 50 cm2 100 cm? 225 cm?' how to treat swollen lymph nodes in neck naturally