(2.) Jerry first walks 5m to East, then 6m to N 60 E, then, she walks 16m to N30'W, 3 finally turns he face and moves 3V3m to south. What is her displacement and direction?​

Answer:

88.761

Explanation:

Answer:

the anser is b

Explanation:

If the force applied on the object is in the direction of its motion, the speed of the object increases. If the force is applied in the direction opposite to the direction of motion, then it results in a decrease in the speed of the object.

The gauge pressure at bottom of vaccine solution will be 16 kPa

Positive pressure is another name for gauge pressure. When a system's internal pressure exceeds that of its surroundings, it is said to be under positive pressure. Any leak that develops in the positively pressured system will therefore escape into the outside world. In contrast, a negative pressure chamber draws air into it.

Given As seen in the illustration, a syringe is held vertically. The container carries a 3 cm tall column of vaccine solution and has an open inner diameter of 1 cm. The needle contains a 2 cm column of vaccine solution and has an open inner diameter of 0.5 mm. At the needle's open end, the solution is exposed to the air. The vaccination solution has a density of 1200 kg/m3.

We have to find the gauge pressure at bottom of vaccine solution

Since the 5N force is applied to vaccine solution the pressure exerted will be much more

Hence the gauge pressure at bottom of vaccine solution will be 16 kPa

Learn more about gauge pressure here:

brainly.com/question/25736513

#SPJ10

Weight is compared with the gravitational force exerted on each of them by the Earth.

Newton's law of gravity states that each particle having mass in the universe attracts each other particle with a force known as the gravitational force.

The gravitational force is proportional to the product of the masses of the two bodies and inversely proportional to the square of their distance.

When mass increases and distance reduces, gravity rises. Gravity also lowers when the distance between two points grows and the mass decreases.

The gravitational force is balanced by weight;

[tex]\rm F = W \\\\ G\frac{mM}{r^2} =mg[/tex]

Hence, weight is compared with the gravitational force exerted on each of them by the Earth.

To learn more about Newton's law of gravitation, refer to the link.

https://brainly.com/question/9699135.

#SPJ1

Hi there!

The maximum deformation of the bumper will occur when the car is temporarily at rest after the collision. We can use the work-energy theorem to solve.

Initially, we only have kinetic energy:

[tex]KE = \frac{1}{2}mv^2[/tex]

KE = Kinetic Energy (J)
m = mass (1060 kg)
v = velocity (14.6 m/s)

Once the car is at rest and the bumper is deformed to the maximum, we only have spring-potential energy:

[tex]U_s = \frac{1}{2}kx^2[/tex]

k = Spring Constant (1.14 × 10⁷ N/m)

x = compressed distance of bumper (? m)

Since energy is conserved:

[tex]E_I = E_f\\\\KE = U_s\\\\\frac{1}{2}mv^2 = \frac{1}{2}kx^2[/tex]

We can simplify and solve for 'x'.

[tex]mv^2 = kx^2\\\\x = \sqrt{\frac{mv^2}{k}}[/tex]

Plug in the givens and solve.

[tex]x = \sqrt{\frac{(1060)(14.6^2)}{(1.14*10^7)}} = \boxed{0.0198 m}[/tex]

The height of stairs a 60 kg student would have to run in order to burn off 1 Calorie of food energy will be 7.1 meters.

The potential energy is due to the virtue of the position and the height. The unit for the potential energy is the joule.

Given data;

Mass of student,m = 60 kg

Energy,E = 4190 J

Height of stairs,h=?

The potential energy is mainly dependent upon the height of the object. The potential energy is found as;

Potential energy = mgh

E=mgh

h=E/mg

h= 4190 J / (60 kg× 9.81  m/s²)

h = 7.1 metre

Hence the height of the stairs will be 7.1 meters.

To learn more about the potential energy, refer to the link;

https://brainly.com/question/24284560

#SPJ1

Answer:

i don't know sorry

i know a good website that may help you

it's called https://skyandtelescope.org/observing/telescope-calculator/

Explanation:

10¹¹ is the approximate number of atoms in a bacterium.

The atomic mass of an element is the average mass of the atoms of an element measured in atomic mass unit (amu).

Given,

Mass of a bacterium atom = 10⁻¹⁵ kg.

Mass of a hydrogen atom  = 10⁻²⁷ kg.

From the above observation ,

The average mass of an atom of the bacterium is ten times the mass of a hydrogen atom.

Atomic mass 1 bacterium atom = 10 x mass of hydrogen atom

                                                  = 10 x 10⁻²⁷ kg.

                                                  = 10⁻²⁶ kg.

Thus,

The number of atoms in a bacterium

=  [tex]\frac{Total mass}{Atomicmass of 1 bacterium}[/tex]

= [tex]\frac{10^{-15} }{10^{-26} }[/tex]

=  [tex]10^{11}[/tex]

The approximate number of atoms in a bacterium  is [tex]10^{11}[/tex].

Learn more about bacterium here:

https://brainly.com/question/12958132

#SPJ1

The centripetal force is obtained by its formulas is,[tex]\rm F_C= \frac{mv^2}{r}[/tex]

The acceleration needed to move a body in a curved way is understood as centripetal acceleration.

The direction of centripetal acceleration is always in the path of the center of the course. The total acceleration is the result of tangential and centripetal acceleration.

The formula for the centripetal force is ;

[tex]\rm F_C= \frac{mv^2}{r}[/tex]

Where,

r is the radius

v is the linear speed

m is the mass of an object

Hence, the centripetal force obtained by its formulas as,[tex]\rm F_C= \frac{mv^2}{r}[/tex]

To learn more about centripetal acceleration, refer to the link;

https://brainly.com/question/17689540

#SPJ1

The coefficient of friction between the block and the surface is determines as 0.1.

Apply the principle of conservation of linear momentum;

0.05(400) = v(0.05 + 25)

20 = 25.05v

v = 0.8 m/s

Apply the principle of conservation of energy

P.E  - K.E = Ux

μmgx - ¹/₂mv²  = ¹/₂kx²

μ(25.05)(9.8)(0.12) - 0.5(25.05)(0.8)² = 0.5(180)(0.12)

29.459μ - 8.016   = 10.8

29.459μ = 2.784

μ = 0.1

Learn more about coefficient of friction here: https://brainly.com/question/20241845

#SPJ1

The term temperature has to do with the  measure of an object's "hotness".

The term temperature has to do with how hot or cold a body is. In other words, the word temperature brings us to call to mind the degree of hotness or coldness of a body.

Succinctly put, the term temperature has to do with the  measure of an object's "hotness".

Learn more about temperature:https://brainly.com/question/7510619

#SPJ1

The distance covered by an accelerating object starting from rest is

D = (1/2 of acceleration) x (time²).

In this question,

D = 100 m

time = 3.8 s

100 = (1/2 acceleration) x (3.8s²)

100 = (1/2 a) x (14.44)

100/14.44  =  1/2 a

200/14.44  =  a

a = 13.85 m/s²

Answer:

D. 20m

Explanation:

this answer is 20 m.

wavelength = velocity / frequency

Answer:horse

Explanation:

Answer:

1.1299 x 10^-8   second    

Explanation:

Period = 1 / f = 1 / (8.85 * 10^7) = 1.1299 x 01^-8  sec

The friction force is 1.5N

Now, using the third equation of motion-

[tex]v^{2}= u^{2} +2as[/tex]

v=final velocity

u=initial velocity

a=acceleration

s=distance

substitute the values in the above equation

1.2=0+ 2a×20

a=1.2/40

a=0.03

friction force=mass ×acceleration

                    =50×0.03

                    =1.5N

hence, The friction force is 1.5N

learn more about frictional force here:

https://brainly.com/question/14955072

#SPJ10

Answer:

As electrical power is measured in Watts (W), therefore it must be also be measured in Joules per Second. So we can correctly say that: 1 watt = 1 joule per second (J/s).

Explanation:

The high salt concentration make sea water significantly less resistive than pure water due to presence of charged ions in the sea water.

The resistivity of a substance is the opposition to the flow of charges offered by the substance.

The greater the resistivity of a substance, the lesser its conductivity.

A high salt concentration make sea water highly conductive due to presence of charged ions in the water. The greater conductivity reduces the resistivity of the sea water.

A pure water has no charged ions in the water, thereby decreasing its conductivity and increasing its resistivity.

Learn more about resistivity here: https://brainly.com/question/17563681

#SPJ1

Answer:

inertia of motion

Explanation:

it's because when a passenger is jumping from a bus his/her body is in motion after falling in a road he/she remains or tends to remain in the state of motion that is the reason

Physical science explains the physical world and not supernatural events and an idea is considered true by science if it can be observed, explained and reproduced by others.

Physical science is a systematic study of the of the physical world and phenomena based on observation and experiments.

The scientific method involves:

Science explains the physical world and not supernatural events.

Science studies physical phenomena such as the stars, the planets, living things, etc.

Science do not study about angels or demons or supernatural events.

An idea is considered true by science if it can be observed, explained and reproduced by others.

Learn more about physical science at: https://brainly.com/question/4431224

#SPJ1

It then can be stated:

[tex]\large\red\hookrightarrow \rm \large \: \:X_m \: = \: \frac{X_1 \: + \: \: X_2 }{2} \: \: \: \: \: \: \: \:... (1) \\ [/tex]

[tex]\large\red\hookrightarrow \rm \large \: \:Y_m \: = \: \frac{Y_1 \: + \: \: Y_2 }{2} \: \: \: \: \: \: \: \:... (2)\\ [/tex]

Since, Xm = -1 and X1 = 1 we can write equation (1) as

[tex]\large\purple\longrightarrow \rm \large \: \:-1 \: = \: \frac{1 \: + \: \: X_2 }{2} \: \: \: \: \: \: \: \:... (1) \\ [/tex]

[tex]\large\purple\longrightarrow \rm \large \: \:-2 \: = \:1 \: + \: X_2[/tex]

[tex]\large\purple\longrightarrow \rm \large \: \: - 2 \: - 1 \: = \: X_2[/tex]

[tex]\large\purple\longrightarrow \rm \large \: \: - 3 \: = \: X_2[/tex]

Since , Ym = 4 and Y1 = 2 we can write the equation (2) as

[tex]\large\purple\longrightarrow \rm \large \: \:4 \: = \: \frac{2 \: + \: \: Y_2 }{2} \: \: \: \: \: \: \: \:... (2)\\ [/tex]

[tex]\large\purple\longrightarrow \rm \large \: \:8 \: = \: 2 \: + \: Y_2[/tex]

[tex]\large\purple\longrightarrow \rm \large \: \:8 \: - \: 2 \: = \: Y_2[/tex]

[tex]\large\purple\longrightarrow \rm \large \: \:6 \: = \: Y_2[/tex]

Therefore the other endpoint of the line (X2, Y2) is (-3 , 6)

The distance x equal to 0.87 cm when the intensity of the light decreases by 9 times.

The intensity of light is given as power emitted by the light by unit area.

I = P/A

I = P/L²

I₁L₁² = I₂L₂²

L₂² = I₁L₁²/I₂

L₂² = (3 x 1.5²)/(9)

L₂² = 0.75

L₂ = 0.87 cm

Thus, the distance x equal to 0.87 cm when the intensity of the light decreases by 9 times.

Learn more about intensity here: https://brainly.com/question/14924672

#SPJ1

Answer:

shown below

Explanation:

2 x 10⁷ as a number is 20,000,000

20,000,000 - 10 = 19,999,990

It went 19,999,990 m/h

in km/h:

19,999,990 / 1000 = 19,999.99 km/h

in km/s

19,999,990 / 3,600,000 = ~5.56 km/s

in m/s

19,999,990 / 3600 = ~5555.56 m/s

Answer:

Explanation:

Half-life problems are modeled as exponential equations.  The half-life formula is [tex]P=P_o\left (\dfrac{1}{2} \right)^{\frac{t}{k}}[/tex] where [tex]P_o[/tex] is the initial amount, [tex]k[/tex] is the length of the half-life, [tex]t[/tex] is the amount of time that has elapsed since the initial measurement was taken, and [tex]P[/tex] is the amount that remains at time [tex]t[/tex].

[tex]P=14.2\left (\dfrac{1}{2} \right)^{\frac{t}{8.0252}}[/tex]

Deriving the half-life formula

If one forgets the half-life formula, one can derive an equivalent equation by recalling the basic an exponential equation, [tex]y=a b^{t}[/tex], where [tex]t[/tex] is still the amount of time, and [tex]y[/tex] is the amount remaining at time [tex]t[/tex].  The constants a and b can be solved for as follows:

Knowing that amount initially is 14.2g, we let this be time zero:

[tex]y=a b^{t}[/tex]

[tex](14.2)=ab^{(0)}[/tex]

[tex]14.2=a *1[/tex]

[tex]14.2=a[/tex]

So, [tex]a=14.2[/tex], which represents out initial amount of the substance, and our equation becomes: [tex]y=14.2 b^{t}[/tex]

Knowing that the "half-life" is 8.0252 days (note that the unit here is "days", so times for all future uses of this equation must be in "days"), we know that the amount remaining after that time will be one-half of what we started with:

[tex]\left(\frac{1}{2} *14.2 \right)=14.2 b^{(8.0252)}[/tex]

[tex]\dfrac{7.1}{14.2}=\dfrac{14.2 b^{8.0252}}{14.2}[/tex]

[tex]0.5=b^{8.0252}[/tex]

[tex]\sqrt[8.0252]{\frac{1}{2}}=\sqrt[8.0252]{b^{8.0252}}[/tex]

[tex]\sqrt[8.0252]{\frac{1}{2}}=b[/tex]

Recalling exponent properties, one could find that  [tex]\left ( \frac{1}{2} \right )^{\frac{1}{8.0252}}=b[/tex], which will give the equation identical to the half-life formula.  However, recalling this trivia about exponent properties is not necessary to solve this problem.  One can just evaluate the radical in a calculator:

[tex]b=0.9172535661...[/tex]

Using this decimal approximation has advantages (don't have to remember the half-life formula & don't have to remember as many exponent properties), but one minor disadvantage (need to keep more decimal places to reduce rounding error).

So, our general equation derived from the basic exponential function is:

[tex]y=14.2* (0.9172535661)^t[/tex]  or [tex]y=14.2*(0.5)^{\frac{t}{8.0252}}[/tex] where y represents the amount remaining at time t.

Solving for the amount remaining

With the equation set up, substitute the amount of time it takes to cross the Pacific to solve for the amount remaining:

[tex]y=14.2* (0.9172535661)^{(31.8)}[/tex]          [tex]y=14.2*(0.5)^{\frac{(31.8)}{8.0252}}[/tex]

[tex]y=14.2* 0.0641450581[/tex]                    [tex]y=14.2*(0.5)^{3.962518068}[/tex]

[tex]y=0.9108598257[/tex]                              [tex]y=14.2* 0.0641450581[/tex]

                                                        [tex]y=0.9108598257[/tex]

Since both the initial amount of Iodine, and the amount of time were given to 3 significant figures, the amount remaining after 31.8days is 0.911g.

This is a uniform rectilinear motion (MRU) exercise.

To start solving this exercise, we obtain the following data:

To calculate distance, speed is multiplied by time.

We apply the following formula: d = v * t.

We substitute the data in the formula: the speed is equal to 4.6 m/s, the time is equal to 10 s, which is left as follows:

[tex]\bf{d=4.6\dfrac{m}{\not{s}}*10\not{s} }[/tex]

[tex]\bf{d=46 \ m}[/tex]

Therefore, the speed at 10 seconds is 46 meters.

[tex]\huge \red{\boxed{\green{\boxed{\boldsymbol{\purple{Pisces04}}}}}}[/tex]

Answer:

20 Newtons

Explanation:

10× 2

Answer: A.

2.5 newtons

Explanation: edmentum

The Brundtland Commission spotted as a matter of urgency, the interconnection between natural resource use and the economy.

The Brundtland Commission was set up with the intention to achieve sustainable development. The tenure of the commission lasted from 1984 to 1987.

The commission identified the pillars of sustainable growth as economic growth, environmental protection, and social equality. The committee opined that environmental problem emanates from poverty in the southern region and reckless consumption of resources in the northern region.

The Brundtland Commission spotted as a matter of urgency, the interconnection between natural resource use and the economy.

Learn more about the Brundtland Commission:https://brainly.com/question/8285049?

#SPJ1

a. Ball P

Density is define as mass per unit volume or the quantity per unit volume, unit area, or unit length.

If [tex]m_{1}[/tex] is mass ,  [tex]V_{1}[/tex] is volume and [tex]D_{1}[/tex]  is density of ball P

[tex]m_{2}[/tex]  is mass ,  [tex]V_{2}[/tex] is volume and [tex]D_{2}[/tex] is density  of ball Q

It is given that  ,

[tex]V_{1}[/tex] = [tex]V_{2}[/tex];

But  [tex]m_{1}[/tex]= [tex]2m_{2}[/tex]

Based on above equation we have:

[tex]\frac{D_{1} }{D_{2} } = (\frac{m_{1} }{V_{1} } )* (\frac{m_{2} }{V_{2} } )\\ \\= (\frac{2m_{2} }{V_{2} })*(\frac{V_{2} }{m_{2} }) \\\\= 2[/tex]

Thus, density of ball P is twice that of Q.

Therefore ,

Ball  P will have a greater density than Q

Learn more about density here:https://brainly.com/question/15164682

#SPJ1

When Angel hits a ball with the ball. As the action is a ball as it is hitted. The reaction force is the force exerted on another ball.

Newton’s third law of motion describes the two forces, action and reaction forces. This states that for every action force, there is an equal and opposite reaction force.

As Angel hits a ball with another ball, the action is the ball as it is hit. The ball exerts a force on the ball. This is the action force. The ball exerts an equal and opposite force on the bat, which is known as the reaction force.

Learn more about Newton's Law of motion:

https://brainly.com/question/10454047

#SPJ10