2. 2 "However, we need to examine our environment, and ask problematic questions such as,


"whose law?" Obviously, it's the law of the dominant class in that society (Study Guide,


p. 7)


Which class does the South African law, including the constitution, serve? Explain fully. (3)

The fundamental frequency of the 1.90-m-long wire with a mass of 0.100 kg and tension of 21.0 N is approximately 5.24 Hz.

Given the information provided, we have a 1.90-m-long wire with a mass of 0.100 kg that is fixed at both ends and has a tension of 21.0 N.
To find the linear mass density (µ) of the wire, we can use the following formula:
µ = mass/length
Using the given values, we can calculate µ as follows:
µ = 0.100 kg / 1.90 m = 0.05263 kg/m
Now that we have the linear mass density, we can find the fundamental frequency (f) using the formula:
f = (1 / 2L) × √(T / µ)
Where:
f = fundamental frequency
L = length of the wire
T = tension
µ = linear mass density
Substituting the values we found earlier, we get:
f = (1 / 2 × 1.90 m) × √(21.0 N / 0.05263 kg/m)
f ≈ 0.263 × √(399.2) ≈ 5.24 Hz
So, the fundamental frequency of the 1.90-m-long wire with a mass of 0.100 kg and a tension of 21.0 N is approximately

5.24 Hz.

Learn more about frequency here:-

https://brainly.com/question/5102661

#SPJ11

a. The mechanical advantage is 2.

b. The length of the slope (input distance) is 5 meters.

a. To calculate the mechanical advantage (MA) in this scenario, we can use the formula:

MA = F_out / F_in

where F_out is the output force (the weight of the block) and F_in is the input force (the force applied to push the block).

In this case, the weight of the block is 500 N (newtons) and the force applied to push the block is 250 N.

MA = 500 N / 250 N

MA = 2

Therefore, the mechanical advantage is 2.

b. To calculate the velocity ratio (VR), we can use the formula:

VR = d_out / d_in

where d_out is the output distance (the height the block is lifted) and d_in is the input distance (the length of the slope).

In this case, the height of the slope is given as 10 m.

VR = 10 m / d_in

To find the input distance (d_in), we need to rearrange the formula:

d_in = d_out / VR

Since the mechanical advantage (MA) is equal to the velocity ratio (VR) in an ideal scenario without friction, we can substitute the MA value of 2 into the formula:

d_in = 10 m / 2

d_in = 5 m

Therefore, the length of the slope (input distance) is 5 meters.

To know more about mechanical refer here

https://brainly.com/question/20434227#

#SPJ11

The beat frequency produced when a 240 Hz tuning fork and a 246 Hz tuning fork are sounded together is 6 Hz. This corresponds to option d) 6 hertz.

When two tuning forks with slightly different frequencies are sounded together, they produce a beat frequency. The beat frequency is the result of the interference between the two waves produced by the tuning forks.

In this case, we have a 240 Hz tuning fork and a 246 Hz tuning fork. To find the beat frequency, we need to calculate the difference between the frequencies of these two tuning forks:

Beat frequency = |Frequency1 - Frequency2|
Beat frequency = |240 Hz - 246 Hz|
Beat frequency = |-6 Hz|

Since frequency cannot be negative, we take the absolute value of the result:

Beat frequency = 6 Hz

So, the beat frequency produced when a 240 Hz tuning fork and a 246 Hz tuning fork are sounded together is 6 Hz. This corresponds to option d) 6 hertz.

In summary, the beat frequency is the difference between the frequencies of two tuning forks sounded together. In this case, with a 240 Hz and a 246 Hz tuning fork, the beat frequency is 6 Hz.

The complete question is:

The beat frequency produced when a 240 hertz tuning fork and a 246 hertz tuning fork are sounded together is

a) 245 hertz

b) 240 hertz

c) 12 hertz

d) 6 hertz

e) none of the above

For more about frequency produced:

https://brainly.com/question/3928502

#SPJ11

Based on the given information, the diver with a mass of 450 N standing at a height of 20 feet has more gravitational potential energy.

Gravitational potential energy can be calculated using the formula: PE = mgh, where PE represents potential energy, m is the mass of the object, g is the acceleration due to gravity, and h is the height above a reference point.

In this case, the diver with a mass of 450 N at a height of 20 feet has a greater mass, resulting in a higher gravitational potential energy compared to the diver with a mass of 400 N at the same height.

To learn more about mass, refer below:

https://brainly.com/question/19694949

#SPJ11

The statement "Nerve impulses travel through your nervous system from neurons to other neurons or body structures" is true because they allow us to perceive and respond to the world around us.

Nerve impulses, also known as action potentials, travel through the nervous system from neurons to other neurons or body structures such as muscles and glands. This communication between neurons is what allows us to perceive, process, and respond to information from our environment.

The process of nerve impulse transmission begins when a neuron is stimulated by a change in its environment. This change can be chemical, mechanical, or electrical. Once the neuron is stimulated, it generates an electrical signal that travels down its axon, a long extension of the neuron.

The electrical signal, or nerve impulse, travels down the axon until it reaches the end of the neuron, known as the axon terminal. At the axon terminal, the impulse triggers the release of neurotransmitters, which are chemical messengers that carry the impulse across the synaptic gap to the next neuron or body structure.

In summary, nerve impulses travel through the nervous system from neurons to other neurons or body structures, allowing us to perceive and respond to the world around us.

To know more about nervous system refer here:

https://brainly.com/question/29355295#

#SPJ11

Complete Question:

Nerve impulses travel through your nervous system from neurons to other neurons or body structures. True or False.

The measure of angle BXC is 48°.

To find the measure of angle BXC. Let's elaborate on the process.

In the given scenario, we have angle AXB measuring 132° and angle AXC measuring 180°. To find the measure of angle BXC, we subtract the measure of angle AXB from angle AXC.

angle BXC = angle AXC - angle AXB

Substituting the given measures, we have:

angle BXC = 180° - 132°

Now, performing the subtraction:

angle BXC = 48°

Therefore, the measure of angle BXC is 48°.

This method relies on the fact that the sum of the angles in a triangle is always 180°. Since angle AXC is a straight angle (measuring 180°) and angle AXB is a known angle (measuring 132°), subtracting angle AXB from angle AXC gives us the measure of angle BXC.

By using this subtraction, we determine that angle BXC measures 48°.

It's important to remember that angle measures can be added or subtracted to find unknown angles or relationships between angles. In this case, subtracting the known angle AXB from the known angle AXC allowed us to find the measure of angle BXC.

To learn more about angle, refer below:

https://brainly.com/question/28451077

#SPJ11

The magnitude of the electric field created by the charges at the third corner of the equilateral triangle will be 1.8 x 10¹⁴N/C.

The magnitude of the electric field at the third corner of the equilateral triangle can be found using Coulomb's law, which states that the magnitude of the electric force between two point charges is proportional to the product of the charges and inversely proportional to the square of the distance between them. The electric field is defined as the force per unit charge.

Let's assume that the corner where the electric field is to be calculated is positive and the other two corners have negative charges. Let Q₁ = +4.0 PC and Q₂ = -6.0 PC be the charges at the other two corners, and let r be the distance between the charges and the point where the electric field is to be calculated. Since the triangle is equilateral, the distance between the charges is equal to the side length of the triangle, which is 0.10 m.

The magnitude of the electric field at the third corner can be calculated as follows:

= k * |Q₁ + Q₂| / r²

where k is the Coulomb constant, which is equal to 9.0 x 10⁹ N·m²/C².

Substituting the values, we get:

E = 9.0 x 10⁹ N·m²/C² * |4.0 PC - 6.0 PC| / (0.10 m)²

E = 9.0 x 10₉ N·m²/C² * 2.0 PC / 0.01 m²

E = 1.8 x 10¹⁴N/C

Therefore, the magnitude of the electric field created by the charges at the third corner of the equilateral triangle is 1.8 x 10¹⁴N/C.

To know more about magnitude

https://brainly.com/question/16815247

#SPJ4

The wave function is a mathematical function that describes the behavior of a particle in terms of its wave-like properties, and it satisfies the Schrödinger equation.

The wave function itself cannot be directly measured or observed, but rather it is used to calculate probabilities of different outcomes of measurements.

The square of the wave function, on the other hand, gives a measurable quantity - the probability density - which can be used to calculate the likelihood of finding a particle in a particular location.

In quantum mechanics, the square of the wave function, denoted as

|Ψ[tex](x)|^2[/tex], gives the probability density of finding a particle at a particular location in space. The probability density is proportional to the probability of finding the particle at a specific position.

The wave function itself, denoted as Ψ(x), gives the complete description of the quantum state of the particle, including its energy, momentum, and other properties.

To know more about wave function refer here

https://brainly.com/question/17484291#

#SPJ11

The Ares 4 MAV (Mars Ascent Vehicle) has been designed to be as light as possible to make it easier to get into a high Martian orbit.

The main body of the vehicle is constructed out of lightweight materials such as aluminium and titanium. This helps reduce the overall weight of the MAV, making it easier to launch into orbit.

Additionally, the MAV is powered by an advanced propulsion system that is designed to provide maximum efficiency with minimal fuel use. This ensures that the MAV is able to reach its destination with minimal fuel, helping to keep the weight of the craft to a minimum.

Finally, the MAV is equipped with a range of advanced navigation and guidance systems that help to keep the craft on its desired trajectory.

These systems help to ensure the MAV is able to reach its destination with minimal fuel, keeping the craft light and helping it to reach its desired orbit.

Know more about Craft light here

https://brainly.com/question/31200758#

#SPJ11

If Dylan were to triple his distance from the center of the Earth by flying in a spacecraft, his weight on the surface of the Earth would decrease to one-ninth of his original weight, which is approximately 69 N.

According to the law of universal gravitation, the weight of an object is directly proportional to the mass of the planet and inversely proportional to the square of the distance from the center of the planet.

Therefore, if Dylan triples his distance from the center of the Earth by flying in a spacecraft, his weight on the surface of the Earth would be one-ninth of his original weight. This is because the distance has been tripled, and the inverse square of three is nine.

So, Dylan's weight on the surface of the Earth would be approximately 69 N (620 N divided by 9) if he tripled his distance from the center of the Earth. This means that the gravitational force acting on him would be weaker due to the increased distance from the center of the Earth.

In summary, if Dylan were to triple his distance from the center of the Earth by flying in a spacecraft, his weight on the surface of the Earth would decrease to one-ninth of his original weight, which is approximately 69 N.

To know more about distance refer here:

https://brainly.com/question/21470320#

#SPJ11

The right side of the heart is the circuit that pumps oxygen-poor blood to the lungs.

Here are some points to explain this further:

- The heart is a muscular organ located in the chest that pumps blood throughout the body.

- The heart has four chambers, two on the right side and two on the left side.

- The right side of the heart is responsible for pumping blood to the lungs, where it can receive oxygen.

- When oxygen-poor blood from the body enters the right atrium of the heart, it is pumped into the right ventricle.

- The right ventricle then pumps the oxygen-poor blood through the pulmonary artery to the lungs, where it can be oxygenated.

- After the blood is oxygenated in the lungs, it returns to the left side of the heart via the pulmonary veins.

- The left side of the heart then pumps the oxygen-rich blood out to the rest of the body through the aorta.

- This process is known as the pulmonary circulation, and it is responsible for delivering oxygen to the body's tissues and organs.

To know more about muscular organ refer here

https://brainly.com/question/16505843#

#SPJ11

When three resistances (2 ohms, 6 ohms, 8 ohms) are connected in parallel their equivalent resistance is 24/13 ohms, and when a wire of resistance 12 ohms is cut into 3 equal pieces its equivalent resistance is 4/3 ohms.

(1) To find the equivalent resistance of three resistances (2 ohms, 6 ohms, 8 ohms) connected in parallel, we can use the formula 1/Rp = 1/R1 + 1/R2 + 1/R3.

1/Rp = 1/2 + 1/6 + 1/8
1/Rp = 6/24 + 4/24 + 3/24
1/Rp = 13/24

To find Rp, take the reciprocal:
Rp = 24/13
So, the equivalent resistance is 24/13 ohms.

(2) When a wire of resistance 12 ohms is cut into 3 equal pieces, each piece will have a resistance of 12/3 = 4 ohms. If these pieces are connected in parallel, we can use the same formula as before:

1/Rp = 1/4 + 1/4 + 1/4
1/Rp = 3/4

Taking the reciprocal:
Rp = 4/3 ohms
So, the equivalent resistance is 4/3 ohms.

Know more about equivalent resistance here:

https://brainly.com/question/21082756

#SPJ11

Elliptical are redder and rounder than spiral galaxies. Option a is correct.

Elliptical galaxies are redder and rounder than spiral galaxies. Elliptical galaxies are so named because they have a shape that ranges from nearly spherical to highly elongated. They are generally redder than spiral galaxies, as they contain an older population of stars that are cooler and emit less blue light.

Spiral galaxies, on the other hand, are typically bluer due to their younger, hotter stars that emit more blue light. Elliptical galaxies also lack the distinctive spiral arms and central bulge of spiral galaxies, making them appear rounder in shape. The correct answer is (a).

To know more about galaxies, here

brainly.com/question/31361315

#SPJ4

The force required to move the 200-newton rock using the lever is 300 N.

We can use the principle of mechanical advantage to determine the force required to move the rock using the lever. Mechanical advantage is the ratio of the output force (the force required to move the rock) to the input force (the force applied by the person). It is given by the formula:

mechanical advantage = output force / input force

In this case, the input force is 60 N and the output force is the force required to move the rock, which we can calculate as follows:

output force = input force x mechanical advantage

The mechanical advantage of a lever is determined by the ratio of the distance from the input force to the fulcrum (the pivot point) to the distance from the output force to the fulcrum. This is known as the lever arm ratio.

In this question, we are told that the person moves the lever 1 m and the rock moves 0.2 m. Therefore, the lever arm ratio is:

lever arm ratio = output distance / input distance

= 0.2 m / 1 m

= 0.2

The mechanical advantage is the inverse of the lever arm ratio:

mechanical advantage = 1 / lever arm ratio

= 1 / 0.2

= 5

Substituting this value in the formula for output force, we get:

output force = input force x mechanical advantage

= 60 N x 5

= 300 N

To know more about lever, here

https://brainly.com/question/3977835

#SPJ4

Satellite mass is 1.69 x 10²² kg; Distance to Corus is 6,760 km; Gravitational acceleration is 3.77 m/s²; Gravitational force is 1.26 x 10¹⁰ N; Minimum orbit speed is 3.25 km/s.

To estimate the mass of the satellite, we can use the formula for the period of a satellite's orbit, which is given by [tex]T=2\pi \sqrt(r^{3} /GM)[/tex], where T is the period, r is the distance between the satellite and the center of Corus, G is the gravitational constant, and M is the mass of Corus.

We know that the period of the satellite is 15 Earth days, which is approximately 1.296 x 106 seconds. We also know that the distance between Corus and the satellite is the sum of the radius of Corus and the altitude of the satellite.

Assuming the altitude of the satellite is 500 km, which is similar to the altitude of the International Space Station, we can estimate the distance to be 6,760 km.

To calculate the satellite's mass, we can rearrange the formula to solve for M, which gives [tex]M=(4\pi ^{2} r^{3} )/(GT^{2} )[/tex]. Substituting the known values, we get M = 1.69 x 1022 kg.

Using the formula for gravitational acceleration,[tex]g = G (M/r^{2} )[/tex], we can calculate the gravitational acceleration towards the core of Corus. Substituting the known values, we get g=3.77 m/s².

To calculate the gravitational force between the satellite and Corus, we can use the formula for gravitational force, [tex]F=G(Mm/r^{2} )[/tex] , where m is the mass of the satellite. Substituting the known values, we get F = 1.26 x 1010 N.

Finally, to calculate the minimum speed of the satellite to orbit Corus, we can use the formula for circular velocity, [tex]v=\sqrt(GM/r)[/tex]. Substituting the known values, we get v = 3.25 km/s.

In summary, a suitable mass for the satellite is approximately 1.69 x 1022 kg, the distance between the satellite and Corus's surface is approximately 6,760 km, the gravitational acceleration towards the core of Corus is approximately 3.77 m/s².

The gravitational force between the satellite and Corus is approximately 1.26 x 1010 N, and the minimum speed of the satellite to orbit Corus is approximately 3.25 km/s.

To know more about acceleration refer here:

https://brainly.com/question/30413854#

#SPJ11

Complete Question:

A new planet called "Corus" was discovered by a team of astronomers that is 60 x 106 km away from Earth: A satellite was launched by a rocket from Earth to reach Corus. At a specific distance from Corus, the rocket releases the satellite to the orbit of the planet The satellite makes one complete revolution around Corus in 15 Earth days. If Corus has a similar mass to Mars, propose a suitable mass of the satellite and estimate:

i. Distance between the satellite and the Corus's surface

ii. Satellite's gravitational acceleration towards the core of Corus

iii. Gravitational force between the satellite and the Corus

iv. Minimum speed of the satellite to orbit Corus

The cantilever beam has a stiffness of 2074.4 N/m, meaning it needs 2074.4 N of force to produce a unit of deflection. The beam's mass is assumed to be insignificant compared to the machine's mass, which is valid for calculating its stiffness.

The stiffness of a beam is defined as the amount of force required to produce a unit of deflection. In this case, we need to find the stiffness of the cantilever beam given the machine's mass, the beam's length, elastic modulus, and area moment of inertia.

To determine the stiffness, we can use the equation:

Stiffness (k) = [tex](3 \times E \times I) / L^3[/tex]

Where E is the elastic modulus, I is the area moment of inertia, and L is the length of the beam. Substituting the given values, we get:

[tex]k = (3 \times 200 \times 10^9 N/m^2 \times 1.8 \times 10^{-6} m^4) / (2.5 m)^3[/tex]

Simplifying this equation gives:

k = 2074.4 N/m

Therefore, the stiffness of the cantilever beam is 2074.4 N/m, which means that it requires a force of 2074.4 N to produce a unit of deflection. It is important to note that the mass of the beam was assumed to be negligible compared to the mass of the machine, which is a valid assumption for the calculation of the beam's stiffness.

To know more about force refer here:

https://brainly.com/question/26115859#

#SPJ11

The spring constant for this particular spring is 60,000 N/m.

To calculate the spring constant (k) for a spring, you can use Hooke's Law, which states that the force (F) required to stretch or compress a spring by a certain distance (x) is proportional to that distance. The formula for Hooke's Law is:

F = k * x

In your question, the spring is stretched 0.50 m (x) and the force applied is 30,000 N (F). We need to find the spring constant (k). To do this, we can rearrange the formula:

k = F / x

Now, we can plug in the given values:

k = 30,000 N / 0.50 m

k = 60,000 N/m

So, the spring constant for this particular spring is 60,000 N/m. This value represents the stiffness of the spring, meaning that it takes 60,000 Newtons of force to stretch the spring by one meter. A higher spring constant indicates a stiffer spring, whereas a lower spring constant means the spring is more easily stretched or compressed. In this case, the spring is relatively stiff, requiring a substantial amount of force to change its length.

For more about spring constant:

https://brainly.com/question/20388857

#SPJ11

The torque needed to keep the stick steady, ranked from largest to smallest, would be: highest when the suspended mass is at the far end of the stick, lower when the suspended mass is closer to the pivot point, and lowest when the suspended mass is at the pivot point itself.

To rank the torque needed to keep the stick steady from largest to smallest, we need to consider the factors that affect torque.

Torque is the rotational equivalent of force, and it depends on the distance between the pivot point (the end of the meter stick you are holding) and the point where the force is applied (the suspended mass), as well as the magnitude of the force.

In this scenario, the torque needed to keep the stick steady will be highest when the suspended mass is at the far end of the stick, i.e. as far away from the pivot point as possible.

This is because the greater the distance between the pivot point and the force, the more torque is required to counteract the force's rotational effect. Therefore, the torque needed to keep the stick steady will be highest when the suspended mass is at the end of the meter stick farthest away from the pivot point.

Conversely, the torque needed to keep the stick steady will be lowest when the suspended mass is at the pivot point itself, as there is no rotational effect to counteract in this scenario.

Therefore, the torque needed to keep the stick steady will be lowest when the suspended mass is at the end of the meter stick closest to the pivot point.

To know more about torque refer here

https://brainly.com/question/25708791#

#SPJ11

Based on information the statement that is true is A. The sun's gravity makes the planets orbit around it.

Gravity is a fundamental force of nature that exists between all objects with mass or energy. The force of gravity depends on the mass of the objects and the distance between them. In the case of the solar system, the sun's gravity is the dominant force that controls the motion of the planets.

The planets are constantly pulled towards the sun by its gravitational force, causing them to orbit around it in elliptical paths. This is known as Kepler's laws of planetary motion.

Learn more about Gravity at:

https://brainly.com/question/557206

#SPJ1

The observed reduction in the volume of the salt solution after shaking suggests that the added water was able to dissolve the salt, resulting in a more compact solution.

A solution is a homogeneous mixture made up of two or more substances that are evenly distributed at a molecular or ionic level. The substance that is present in the largest amount is called the solvent, and the substances that are dissolved in it are called solutes. The solutes can be gases, liquids, or solids.

The process of forming a solution involves the solute particles being surrounded by the solvent particles, which causes the solute particles to become evenly distributed throughout the solvent. The attractive forces between the solvent and solute molecules or ions play a crucial role in determining the concentration of the solution.

Solutions can have a wide range of properties, such as color, density, boiling and melting points, and electrical conductivity, which depend on the identity of the solutes and the solvent. Solutions are an essential part of many chemical, biological, and industrial processes, and understanding their properties and behavior is crucial in many fields of science and technology.

Here in this Question, When salt is added to water, it dissolves to form a saltwater solution. However, the addition of more water than the solubility of salt causes some of the salt to remain undissolved at the bottom of the flask. When the flask is shaken, the salt particles that were initially undissolved become suspended in the solution due to the agitation, thereby reducing the volume of the solution. This is because the suspended particles take up space in the solution, which was initially occupied by the water molecules.

Therefore, The observed decrease in salt solution volume after shaking indicates that the salt was able to dissolve in the additional water, resulting in a more compact solution.

To learn more about the type of solution click:

https://brainly.com/question/30239692

#SPJ1

To make the concert F sound right to the audience, Sammy Hagar and the band should play the note at a frequency of 607 Hz.

The frequency that the audience will hear, denoted as f', is related to the frequency of the source, f, by the formula: f' = f (v + u) / (v - u)

where v is the speed of sound, u is the speed of the observer relative to the medium, and in this case, v = 343 m/s and u = -32 m/s.

When the stage is moving toward the audience, the relative speed of the sound waves is increased, so the frequency heard by the audience is higher. Using the above formula: f' = 540 Hz (343 + 32) / (343 - 32) = 607 Hz

Therefore, to make the concert F sound right to the audience, Sammy Hagar and the band should play the note at a frequency of 607 Hz.

To know more about frequency, refer here:

https://brainly.com/question/14316711#

#SPJ11

The average velocity of the 150 kg cart on the 75-meter roller coaster track is approximately 0.42 meters per second.

To find the average velocity of the cart, we need to use the formula:

Average velocity = Total displacement / Total time

In this case, the total displacement is 75 meters (the length of the track) and the total time is 3 minutes, which we need to convert to seconds (1 minute = 60 seconds, so 3 minutes = 180 seconds).

Average velocity = 75 meters / 180 seconds

Average velocity ≈ 0.42 meters per second

So, the average velocity of the 150 kg cart on the 75-meter roller coaster track is approximately 0.42 meters per second.

To learn more about velocity, refer below:

https://brainly.com/question/17127206

#SPJ11

The correct answer is C. Methane gas combines with oxygen to form carbon dioxide and water.

Methane gas combines with oxygen to form carbon dioxide and water. This is a chemical reaction where the atoms of the reactants (methane and oxygen) are rearranged to form the products (carbon dioxide and water). In the other reactions mentioned, either nuclear fusion or nuclear fission occurs, which involves changes in the nuclei of the atoms, but not a rearrangement of the atoms themselves.

Know more about Methane Gas here:

https://brainly.com/question/12645635

#SPJ11

Adding a loop after the tallest hill in order to maximize the kinetic energy of the car change to the model would allow the toy car to travel over all three hills. Therefore, the correct answer is option A.

The toy car stopping at point X indicates that it lacks sufficient energy to overcome the potential energy barriers of the subsequent hills. In order to allow the toy car to travel over all three hills, we need to provide it with more kinetic energy.

Therefore, adding a loop after the tallest hill could provide the car with enough kinetic energy to overcome the subsequent hills. Option B, which orders the hills from shortest to tallest, would not provide the car with enough potential energy to overcome the tallest hill, let alone the subsequent hills.

On the other hand, option C, which orders the hills from tallest to shortest, would provide too much potential energy to the car at the beginning, resulting in the car overshooting the first hill and losing energy in the process.

In conclusion, adding a loop after the tallest hill would be the most appropriate change to the model to allow the toy car to travel over all three hills. Therefore, the correct answer is option A.

To know more about kinetic energy refer here:

https://brainly.com/question/7674744#

#SPJ11

Ans. positive acceleration

When an object is speeding up, the acceleration is in the same direction as the velocity. Thus, this object has a positive acceleration.

1). The mass of 1 cm³ of mercury is 13.6 g.

2). The mass of 10 cm³ of mercury is 136 g.

1) The mass of 1 cm³ of mercury can be calculated using the density formula:

density = mass / volume

Rearranging the formula to solve for mass, we get:

mass = density x volume

Plugging in the values:

density = 13.6 g/cm³

volume = 1 cm³

mass = 13.6 g/cm³ x 1 cm³

mass = 13.6 g

b) Similarly, to find the mass of 10 cm³ of mercury, we can use the same formula:

mass = density x volume

Plugging in the values:

density = 13.6 g/cm³

volume = 10 cm³

mass = 13.6 g/cm³ x 10 cm³

mass = 136 g

To know more about mercury refer here

https://brainly.com/question/28422859#

#SPJ11

The tail of a comet points away from the sun due to the effect of solar wind. Solar wind is a stream of charged particles that flow outward from the sun at high speeds.

When these particles interact with the comet, they cause the material that makes up the coma and tail of the comet to be pushed away from the sun. This effect is called radiation pressure.

The radiation pressure is stronger on the side of the comet facing the sun, so the tail is pushed away from the sun. This is why the tail of a comet always points away from the sun.

Know more about radiation pressure here

https://brainly.com/question/18120262#

#SPJ11

The net torque on the Ferris wheel is approximately 1,500,000 N*m.

To find the net torque on the Ferris wheel, we'll need to use the following formula: τ = I * α, where τ represents torque, I is the moment of inertia, and α is the angular acceleration.

First, we need to find the angular acceleration (α). Since the Ferris wheel accelerates from rest (initial angular speed = 0) to an angular speed of 20 rad/s in 12 s, we can use the formula: α = (final angular speed - initial angular speed) / time.

α = (20 rad/s - 0 rad/s) / 12 s = 20/12 rad/s² = 5/3 rad/s²

Next, we'll find the moment of inertia (I) for a circular disk with a mass (m) of 2000 kg and a radius (r) of 30 m: I = (1/2) * m * r².

I = (1/2) * 2000 kg * (30 m)² = 1000 kg * 900 m² = 900,000 kg*m²

Now, we can find the net torque (τ) using the formula: τ = I * α.

τ = 900,000 kg*m² * 5/3 rad/s² ≈ 1,500,000 N*m

So, the net torque on the Ferris wheel is approximately 1,500,000 N*m.

To learn more about inertia, refer below:

https://brainly.com/question/3268780

#SPJ11

To produce a rainbow, the index of refraction needs to vary with wavelength, which causes the different colors of light to refract at slightly different angles.

This occurs when light enters a water droplet and is bent, or refracted, as it slows down due to the higher index of refraction of water compared to air. The different colors of light then reflect off the inner surface of the droplet and are refracted again as they exit the droplet, creating a spectrum of colors. This process is called dispersion and is what creates the beautiful colors of a rainbow.
To produce a rainbow, the index of refraction needs to vary with the wavelength of light. This phenomenon, called dispersion, causes different colors (wavelengths) of light to bend at slightly different angles when passing through a medium like water droplets in the atmosphere. The variation in the index of refraction leads to the separation of colors and the formation of a rainbow.

Learn more about refraction here:-

https://brainly.com/question/14760207

#SPJ11