Answer and Explanation:
When using simulations, it is important that the researcher knows some limitations. This is because the simulations do not behave exactly like what they represent, in addition to not presenting very important details for analysis and without approximations of what really happens with what they are representing. When modeling the synthesis of Ammonia, for example, these limitations can cause inaccuracies that will compromise the entire analysis.
When using simulations, it is important that the researcher knows some limitations. This is because the simulations do not behave exactly like what they represent, in addition to not presenting very important details for analysis and without approximations of what really happens with what they are representing. When modeling the synthesis of Ammonia, for example, these limitations can cause inaccuracies that will compromise the entire analysis.
Move the red warning icon to focus of the earthquake.
Move the green location icon to the epicenter of the earthquake.
Move the blue star icon to the fault.
Answer:
Red goes in the spiky yellow box. Green goes where the red circles are. Blue goes in the small yellow box that is pointing to the line.
Explanation:
The focus of an earthquake is where it starts in the earth. The epicenter is the part directly above the focus on the surface. The fault is the part where the earth's crust splits.
Every orbital in a sub level is singly occupied before any orbital is doubly occupied is the statement of
Answer:
Hund's rule of maximum multiplicity
the ph of a naoh solution is 12.05. what is the concentration of [oh-] of the naoh solution? express your answer in standard notation
Answer:
0.01 M
Explanation:
NaOH (sodium hydroxide) is a strong base, so it is completely dissociated into ions in aqueous solution:
NaOH ⇄ Na⁺ + OH⁻
So, we have OH⁻ ions in solution.
From the problem, we have the pH value. The pH is calculated as:
pH = -log [H⁺]
As NaOH is a base, we can also calculate the pOH:
pOH = -log [OH⁻]
Thus. we can use the relation between pH and pOH to calculate the pOH and then use it to calculate [OH⁻]:
pH + pOH = 14 ⇒ pOH = 14 - pH = 14 - 12.05 = 1.95
pOH = -log [OH⁻] ⇒ [OH⁻] = [tex]10^{-pOH}[/tex]= [tex]10^{1.95}[/tex]= 0.0112 M ≅ 0.01 M
Answer:
0.0112
Explanation:
They said that was the answer.
the Rockies and the Appalachians are two major mountain ranges in the United States. Which type of plate movement caused these mountain ranges to form
Answer:
Convergent
Explanation:
I don't know whether this is one of your answers but It is convergent because convergent boundaries are when two plates collide against each other which can create mountains and volcanos.
Describe how naturally
acidic rainwater can affect a
mountain of limestone.
Answer:
The naturally acidic rain will gradually wear the mountain of limestone away.
Hope it helps!
which is the command center of the body
Answer:
nervous system
or u can say brain too
Explanation:
hope this is what u want
Answer:
Your nervous system is your body's command center.
Explanation:
since it is originated from your brain, it controls your movements, thoughts and automatic responses to the world around you.
A computer randomly puts a point inside the rectangle. What is the probability
that the point does not land in triangle T?
8
4
4
S
LO
T
2
7
O A.
O B. 13
C. }
CON 002
D.
3
Answer:
c
Explanation:
If you were to mass the reactants before the reaction and then mass the products after the reaction,what would you expect to find? Why? How is this related to balancing your equations?
Explanation:
What would you expect to find?
- The masses of the reactants would be equal to the masses of the product.
Why?
- This is due to the law of conservation of matter which states that matter is neither created nor destroyed in an isolated system but converted from one form to the other.
How is this related to balancing your equations?
- This is why during balancing of equations, we must ensure that the number of atoms in the reactant side must be equal to the number of atoms in the product side.
Rocks are classified on the basis of
Answer:
Rocks are classified according to characteristics such as mineral and chemical composition, permeability, texture of the constituent particles, and particle size. This transformation produces three general classes of rock: igneous, sedimentary and metamorphic. Those three classes are subdivided into many groups.
Explanation:
Is hot lava a mineral?
Answer: No.
Explanation:
:)
Answer:
Lava is made up of many different molten minerals and other things such as silicon, oxygen, aluminum, iron, magnesium, calcium, sodium, potassium, phosphorus, and titanium.
Explanation:
Please brainlist me
2.)what is the place value of 7 in 970 123 885
3.)in 292.145,what number is in the thousands place?
4.)what is the place value of 9 in 6547.965?
5.)in 476.8976,what is the
value of underline digi?...si number 7 po naka underline.
Answer:
2.place value is 70 000 00
9. The role of an organism in an ecosystemis called alan
O A. habitat
O B. niche
O C. evolution
D. community
Given this balanced equation:
1 Cu + 1 H2SO4 -> 1 CuSO4 + 1 H2
If you have 22.45 moles of H2SO4 , how many mole of CuSO4 can you make?
Answer value
Molten zinc chloride can be electrolysed.
Describe how this experiment can be carried out in a laboratory, explaining how the products of this electrolysis are formed.
(6) marks
Answer: The products of electrolysis are Zn(l) and [tex]Cl_2[/tex] gas
Explanation:
Electrolysis of a subastance is breaking it into its constituents by the action of electrical current.
In the electrolysis of molten zinc chloride, zinc metal is produced at the cathode which is a negative electrode and chlorine gas produces as the anode which is a positive electrode.
[tex]ZnCl_2(l)\rightarrow Zn^{2+}+2Cl^-[/tex]
At anode : [tex]2Cl^-(l)\rightarrow 2e^-+Cl_2(g)[/tex]
At cathode : [tex]Zn^{2+}(l)+2e^-\rightarrow Zn(l)[/tex]
Two moles of phosphoric acid (H3PO4) contain, respectively: "x" moles of hydrogen atoms, "y" moles of phosphorous atoms, "z" moles of oxygen atoms.
Options:
a)9,3,12
b)2,2,2
c)3,1,4
d)6,2,8
Answer:
d)
Explanation:
in one mole of phosphoric acid you have 3 mol hydrogen, 2 mol phosphorus, and 4 mol oxygen. just multiply everything by 2 and you get 2 mol of phosphoric acid
In the carbon cycle, carbon is transferred from animals to plants by which of the following?
A. carbon dioxide
B. oxygen
C. sugars
D. water
Answer:
A carbon dioxide
its how carbon is transferred
Carbon cycle is the process of balancing the amount of carbon in the atmosphere and what is present in plants and animals. In carbon cycle, carbon is transferred in the form of carbon dioxide from animals to plants.
What is carbon cycle?Carbon cycle is a geochemical cyclic process by which the carbon gas is exchanged between the atmosphere and biosphere. Carbon is the main content of all biological materials as well as living.
These events in carbon cycle balance the amount of carbon in atmosphere and biosphere to sustain life. Thus the wasted carbon from animals are recycled back to the atmosphere in the form of carbon dioxide.
We intake oxygen and release carbon dioxide. The released carbon dioxide is uptaken by plants and used for photosynthesis. By the process of photosynthesis, plants are making glucose and energy.
Therefore, In the carbon cycle, carbon is transferred from animals to plants in the form of A. carbon dioxide.
To find more about carbon cycle, refer the link below;
https://brainly.com/question/1627609
#SPJ6
DNA forms two strands. One of the strands of a piece of a DNA molecule has the bases ATA.
Which bases does the other strand have?
Select one:
A: CAC.
B: TAT.
C: GTG.
D: ATA.
Answer:
b
Explanation:
Combinations between two strands:
T - A
A - T
C - G
G - C
(so if one strand has A for example, then the other strand must have T in the same spot)
Bases which are present on the other strand of DNA are TAT.
What is DNA?DNA or deoxyribonucleic acid is a hereditary material present in humans as well as all living beings. Almost every cell present in the body has DNA. Most DNA are located inside the cell , that is in the nucleus of the cell. But a small portion of DNA can be found in the mitochondria of the cell as well.
The information in DNA is stored as a code which is composed of four chemical bases 1) adenine 2)guanine 3) cytosine 4) thymine . The human DNA consists of 3 billion bases . The order of of these bases determine information which is used for building and maintaining an organism.
The DNA bases can pair with each other .Adenine pairs with thymine and guanine with cytosine to form units which are called as base pairs.Each base apart from other complementary base it also attaches itself to a sugar and a phosphate molecule.
Learn more about DNA ,here:
https://brainly.com/question/22499464
#SPJ6
The breakdown of a certain pollutant X in sunlight is known to follow first-order kinetics. An atmospheric scientist studying the process fills a 20.0Lreaction flask with a sample of urban air and finds that the partial pressure of X in the flask decreases from 0.473atm to 0.376atm over 5.6hours.
Calculate the initial rate of decomposition of X, that is, the rate at which Xwas disappearing at the start of the experiment.
Round your answer to 2 significant digits.
Answer:
0.019 atm / hr
Explanation:
Initial Concentration (Pressure) [A]o = 0.473 atm
Final Concentration (Pressure) [A] = 0.376 atm
Time = 5.6 hours
The breakdown follows first order kinetics.
The integrated rate law for a first order reaction is given as;
ln[A] = ln[A]o - kt
ln(0.376) = ln(0.473) - k (5.6)
ln(0.376) - ln(0.473) = - 5.6 k
5.6 k = 0.23
k = 0.0411 hr⁻¹
The rate of decomposition is given as;
Rate = k [X]
Where [X] represents Concentration (Pressure) = 0.473 atm
Rate = 0.0411 * 0.473 = 0.019 atm / hr
QUESTION 3
Which statement is WRONG about electromagnetic waves?
A. Electric field is perpendicular to magnetic field.
B. Vibration of electric fields is perpendicular to propagation direction.
C. Different visible waves show different colors.
D. Different waves propagate in different speed.
Answer:
Different visible waves show different colors
In the electromagnetic spectrum, different visible waves show different colors.
What is electromagnetic spectrum?The electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.
The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.
In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.
Learn more about electromagnetic spectrum,here:
https://brainly.com/question/23727978
#SPJ2
PLEASE HURRY. This is a project please help me as soon as possible.
1. What do you think would have happened if the light pollution had been a permanent condition
on planet Oopsa?
2. What do you think would have happened if the light pollution were green instead of red?
Please help asap. Will give brainliest.
Answer:
Light pollution is excessive, misdirected or inappropriate outdoor lighting. Too much light pollution washes out the view of the Universe, increasing energy consumption, interferes with astronomical research, disrupts ecosystems, and affects the health and safety of humans and wildlife.
Explanation:
Light pollution radically alters their nighttime environment by turning night into day. ... “Predators use light to hunt, and prey species use darkness as cover,” Kyba explains “Near cities, cloudy skies are now hundreds, or even thousands of times brighter than they were 200 years ago.
Why parafin oil use in melting
Answer:
Paraffin oil is used for determination of boiling point and melting point for the following reasons: It has a very high boiling point and so it can be used to maintain high temperatures in the boiling and melting point apparatus without loss of the substance.
What is the product of the first beta decay in this series?
A)
AC-227
B)
Ac 228
Ra-227
D
Rn 224
Answer:
B)
Explanation:
In beta decay the nucleus loses a neutron and gains a proton. The mass therefore remains constant but the atomic number increases by one.
Which statement best describes a heart attack?
A. Certain blood vessels expand
B. Certain blood vessels shrinks
C. Blood vessels are normal
D. Certain blood vessels are blocked by fatty acids
Answer:
I think number D is correct
Answer:
D. Certain blood vessels are blocked by fatty acids
Explanation:
A heart attack occurs when the flow of blood to the heart is blocked. The blockage is most often a buildup of fat, cholesterol and other substances, which form a plaque in the arteries that feed the heart (coronary arteries). Sometimes, a plaque can rupture and form a clot that blocks blood flow.
The hybridisation of the central atom in ICL-2
a) sp.
b) sp2
c) sp3d d)sp3
Explanation:
For ICl²-, the central iodine atom is bonded to the 2 chlorine atoms and has 3 lone electron pairs.
Altogether it has 5 electron domains, which means it is sp3d hybridized. (C)
When benzene is treated with 2-methylpropene and sulfuric acid, the product obtained is tert-butylbenzene. Propose a mechanism for this transformation. For the mechanism, draw the curved arrows as needed. Include lone pairs and charges in your answer.
Answer:
See explanation and image attached
Explanation:
This reaction begins when the pi bond in 2-methylpropene is attacked by a proton. A tertiary carbocation is formed which now may attack a benzene ring in an electrophilic reaction. A tertiary carbocation is very stable.
The electrophilic attack of the tertiary carbocation yields the final product tert-butylbenzene as shown in the image attached.
Skin color variations were caused by:
a). The change in melanin, the skin's brown pigment
b). The climate of where people migrated to
c)Diets that are rich in Vitamin D
d) All of the above
I'm certain the answer is D: All of the above, but please correct me if I'm wrong ^^
Mercury can be obtained by reacting mercury(II) sulfide with calcium oxide. How many grams of Mercury metal are produced when 2.11 g of calcium oxide reacts with excess mercury(II) sulfide?
4HgS+4CaO=4Hf+3CaS+CaSO4
a. 10.1 g
b. 1.80 g
c. 13.4 g
d. 7.56 g
Answer:
Option D. 7.56 g of Hg.
Explanation:
The balanced equation for the reaction is given below:
4HgS + 4CaO —> 4Hg + 3CaS + CaSO₄
Next, we shall determine the mass of CaO that reacted and the mass of Hg produced from the balanced equation. This is can be obtained as follow:
Molar mass of CaO = 40 + 16
= 56 g/mol
Mass of CaO from the balanced equation = 4 × 56 = 224 g
Molar mass of Hg = 200.59 g/mol
Mass of Hg from the balanced equation = 4 × 200.59 = 802.36 g
SUMMARY
From the balanced equation above,
224 g of CaO reacted to produce 802.36 g of Hg.
Finally, we shall determine the mass of Hg produced by the reaction of 2.11 g of CaO. This can be obtained as follow:
From the balanced equation above,
224 g of CaO reacted to produce 802.36 g of Hg.
Therefore, 2.11 g of CaO will react to produce = (2.11 × 802.36)/224 = 7.56 g of Hg.
Thus, 7.56 g of Hg were obtained from the reaction.
Am I correct?
As gravity/distance increases between two objects, the gravitational pull between them weakens/strengthens
Yes, As the gravity/distance increases between two objects, the gravitational pull between them weakens/strengthens.
Explanation:There is a gravitational force of attraction between every object in the universe. The size of the gravitational force is proportional to the masses of the objects and weakens as the distance between them increases.
A certain liquid X has a normal boiling point of 129.90°C and a boiling point elevation constant =Kb= 1.67°C·kgmol^−1. Calculate the boiling point of a solution made of 90.g of iron(III) chloride (FeCl3) dissolved in 650.g of X.
Answer:
Boiling T° of solution = 135.6°C
Explanation:
Formula for elevation boiling point is:
ΔT = Kb . m . i
ΔT = Boiling point of solution - Boiling point of pure solvent
Kb = Boiling point elevation constant
m = molality → moles of solute in 1kg of solvent
i = numbers of ions dissolved
FeCl₃ → Fe³⁺ + 3Cl⁻
In the dissociation of the ionic salt, we determined 4 moles of ions dissolved.
3 for chlorides and 1 for iron. Then i = 4
m → We convert the mass of solute to moles:
90 g . 1mol / 162.2g = 0.555 moles
650 g of solvent = 0.650 kg of solvent
m = 0.555 mol/0.650kg → 0.85
We replace data at formula
Boiling T° of solution - 129.90°C = 1.67°C . kg/mol . 0.85 mol/kg . 4
Boiling T° of solution = 1.67°C . kg/mol . 0.85 mol/kg . 4 + 129.90°C
Boiling T° of solution = 135.6°C
२
1. A ratio of the parts of a mixture are exact true or false.