Ite
a city is considering different water purification methods for the water supply. which fact would help inform the city if cost was
a significant constraint? (1 point)
iter
reverse osmosis systems are more expensive because of the chlorine treatments
iten
olon exchange systems are more expensive because of the chlorine treatments
iten
o reverse osmosis systems are more expensive because of the use of filters that need replacement
iten
olon exchange systems are more expensive because of the use of filters that need replacement
item
iten

The volume of the same gas is 320 L.

Use the combined gas law to solve for the final volume of the gas:

(P1V1/T1) = (P2V2/T2)

Substituting the given values, we get:

Solving for V2, we get:

Therefore, the volume of the gas at the new conditions is 320 L.

The combined gas law relates the pressure, volume, and temperature of a gas in a closed system. It states that the product of pressure and volume divided by the temperature is a constant for a given mass of gas in a closed system undergoing changes in pressure, volume, and temperature. Mathematically, the combined gas law can be represented as:

Where P₁ and V₁ are the initial pressure and volume, T₁ is the initial temperature, P₂ and V₂ are the final pressure and volume, and T₂ is the final temperature. This equation is useful in predicting the behavior of gases when the conditions of pressure, volume, and temperature are changed. The combined gas law is a combination of Boyle's law, Charles's law, and Gay-Lussac's law, and it can be derived from the ideal gas law.

To learn more about combined gas law, here

https://brainly.com/question/30458409

#SPJ4

Answer:

1)b

2)c

3)e

4)d

5)a

6)b

7)a

8)e

9)c

10)e

11)b

12)d

13)d

14)d

15)d

The mass of KI needed to prepare 500 mL of a 0. 750 M solution is 62.25 grams

To compute the mass of KI needed to prepare 500 mL of a 0.750 M solution, use the formula:

Molarity (M) = moles of solute / volume of solution in liters

First, convert the volume to liters: 500 mL = 0.5 L

Next, rearrange the formula to find the moles of solute:

moles of solute = Molarity × volume of solution in liters
moles of KI = 0.750 M × 0.5 L
moles of KI = 0.375 moles

Now, find the molar mass of KI (Potassium Iodide):
K (Potassium) = 39.10 g/mol
I (Iodine) = 126.90 g/mol
Molar mass of KI = 39.10 g/mol + 126.90 g/mol = 166.00 g/mol

Finally, calculate the mass of KI needed:

mass of KI = moles of KI × molar mass of KI
mass of KI = 0.375 moles × 166.00 g/mol
mass of KI = 62.25 g

Therefore, you will need 62.25 grams of KI to prepare 500 mL of a 0.750 M solution.

Know more about Molarity here:

https://brainly.com/question/8732513

#SPJ11

An advantageous trait describes the brown scales in fish living in a muddy lake environment, providing them with a better chance of survival and reproductive success by blending in with their surroundings and making it harder for predators to see them.

The term that best describes the brown scales in this scenario is advantageous trait. An advantageous trait is a characteristic that provides an organism with a greater chance of survival and reproductive success in a specific environment. In this case, the brown scales provide an advantage to the fish living in the muddy lake environment as they blend in better with their surroundings, making it harder for predators to see them. As a result, fish with brown scales are more likely to survive and reproduce, passing on this trait to their offspring. The silver scales are the predominant phenotype, meaning they are the most common physical expression of the fish's genotype. The brown scales may have arisen through a new mutation, but their persistence in the population suggests they have become a part of the fish's genetic makeup. There is no indication that an inactivated gene is responsible for the brown scales.

Know more about predators here:

https://brainly.com/question/28871161

#SPJ11

4. The pH of the 0.25M solution of H₃O⁺ is 0.602.

5. The pH of the 6.3 x 10⁻⁸M solution of H₃O⁺ is 7.2.

6. Comparing the pH values from 4 and 5, the solution with a pH of 7.2 is a base.

7: Comparing the pH values from 4 and 5, the 0.25M H₃O⁺ solution (pH 0.60) is a strong acid because its pH is much lower than that of the 6.3x10^-8M H₃O⁺ solution (pH 7.20).

Let us learn more in detail.

1. pH: pH is a measure of the acidity or basicity of a solution. It is defined as the negative logarithm of the concentration of hydrogen ions (H⁺) in a solution.

2. H₃O⁺: H₃O⁺ is the hydronium ion, which is formed when a proton (H⁺) is added to a water molecule (H₂O). It is the most common form in which hydrogen ions exist in aqueous solution.

3. Strong acid: A strong acid is an acid that completely dissociates in water, producing a large number of H⁺ ions. Examples of strong acids include hydrochloric acid (HCl) and sulfuric acid (H₂SO₄).

Now, let's tackle the questions:

4. To calculate the pH of a 0.25M solution of H₃O⁺, we can use the following formula:

pH = -log[H₃O⁺]

where [H₃O⁺] is the concentration of hydronium ions in moles per liter. In this case, [H₃O⁺] = 0.25M, so:

pH = -log(0.25) = 0.602

Therefore, the pH of the solution is 0.602.

5. To calculate the pH of a 6.3x10-8M solution of H₃O⁺, we can use the same formula:

pH = -log[H₃O⁺]

In this case, [H₃O⁺] = 6.3x10-8M, so:

pH = -log(6.3x10-8) = 7.2

Therefore, the pH of the solution is 7.2.

6. To determine which solution is a base, we need to look at the pH. pH values below 7 indicate an acidic solution, while pH values above 7 indicate a basic solution. Therefore, the solution with a pH of 7.2 (from question 5) is a base.

7. To determine which solution is a strong acid, we need to consider the concentration of H₃O⁺+ ions. A strong acid is one that completely dissociates in water, producing a large amount of H⁺ ions. Therefore, the solution with a higher concentration of H₃O⁺ ions (from question 4) is a strong acid.

Learn more about pH at https://brainly.com/question/172153

#SPJ11

Viewing the moon on the 7th day of the lunar cycle, 35% of the the lunar surface would be illuminated.

The moon is in its first quarter phase on the seventh day of the lunar cycle, which makes it seem as a half-circle in the sky. This occurs because the sun's surface is lighted exactly 50% of the time at this time.

The moon's other half was still completely opaque. Different regions of the moon will be illuminated on any given day depending on the moon's phase, which changes over the course of the lunar cycle.

On the seventh day of the cycle, when the moon will be in its first quarter phase, just half of the lunar surface will be fully illuminated by the sun.

Learn more about lunar cycle:

https://brainly.com/question/31453214

#SPJ4

The amount of HCl produced when 57.49 grams of H₂SO4 after a chemical reaction with 98.20 grams of NaCl (in grams) is found out being  42.70 grams.

The balanced chemical equation as per the mentioned case, the reaction between H₂SO₄ and NaCl can be represented as,

H₂SO₄ + 2 NaCl -----> 2 HCl + Na₂SO₄

We are needed to use stoichiometry in the way to know the amount of HCl produced out from the given amounts of H₂SO₄ and NaCl.

Step 1: Convert the given masses of H₂SO₄ and NaCl into an amount of equivalent moles.

Molar mass of H₂SO₄ is = 98.08 g/mol

Molar mass of NaCl is 58.44 g/mol

Number of moles of H₂SO₄  = 57.49 g / 98.08 g/mol = 0.586 mol

Number of moles of NaCl = 98.20 g / 58.44 g/mol = 1.679 mol

Step 2: Now we have to balance the chemical equation to know the mole ratio for H₂SO₄ to HCl.

From the balanced equation, we observe that 1 mole of H₂SO₄ produces 2 moles of HCl. Therefore, the 0.586 moles of H₂SO₄ will be producing about 2 × 0.586 = 1.172 moles of HCl.

Lastly, Convert the moles of HCl to grams.

Molar mass of HCl = 36.46 g/mol

Mass of HCl produced = 1.172 mol × 36.46 g/mol = 42.70 g

Therefore, it can be concluded that about 57.49 grams of H₂SO₄ would be reacting with nearly 98.20 grams of NaCl in order to produce out about 42.70 grams of HCl.

Learn more about chemical reactions :

https://brainly.com/question/29762834

Answer:

The balanced chemical equation is:

2As2O3 + 3C → 3CO2 + 4As

To find out how many grams of carbon dioxide can be produced, we need to use stoichiometry.

First, we need to determine which reactant is limiting. We can do this by calculating the amount of carbon that reacts with As2O3:

1.00 g C × (1 mol C / 12.01 g) × (2 mol As2O3 / 3 mol C) × (197.84 g As2O3 / 1 mol As2O3) = 2.60 g As2O3

This means that only 2.60 g of the As2O3 will react, and the rest will be in excess.

Now we can use the balanced equation to calculate the amount of CO2 that will be produced:

2 mol As2O3 : 3 mol CO2

2.60 g As2O3 × (1 mol As2O3 / 197.84 g) × (3 mol CO2 / 2 mol As2O3) × (44.01 g CO2 / 1 mol CO2) = 3.56 g CO2

Therefore, 3.56 grams of carbon dioxide can be produced.

The total pressure of the container is 1,700 kPa.

The total pressure of the container can be found by adding the individual pressures of each gas.

In this case, we have:

Carbon dioxide (CO₂): 425 kPa

Nitrogen (N₂): 750 kPa

Oxygen (O₂): 525 kPa

To find the total pressure, simply add these values together:

Total pressure = 425 kPa (CO₂) + 750 kPa (N₂) + 525 kPa (O₂)

                        = 1700 kPa

So, the total pressure of the container is 1700 kPa.

To know more about total pressure, click below.

https://brainly.com/question/15388348

#SPJ11

The enthalpy change when 2.50 kg of Glauber's salt solidifies is 605.28 kJ.

To calculate the enthalpy change when 2.50 kg of Glauber's salt (sodium sulfate decahydrate, Na2SO4·10H2O) solidifies, you can follow these steps:

1. Convert the mass of Glauber's salt to moles:
2.50 kg = 2500 g
Molar mass of Na2SO4·10H2O = (2×23) + (32) + (4×16) + (10×(2+16)) = 46 + 32 + 64 + 180 = 322 g/mol
Moles of Glauber's salt = 2500 g / 322 g/mol = 7.76 mol

2. Multiply the moles by the energy released per mole:
Energy released = 7.76 mol × 78.0 kJ/mol = 605.28 kJ

The enthalpy change when 2.50 kg of Glauber's salt solidifies is 605.28 kJ.

To learn more about energy, refer below:

https://brainly.com/question/1932868

#SPJ11

For each activity, you should set the stopcock as follows: completely closed at the beginning of titration, partially open near the endpoint, completely open when filling the buret, and partially open during buret conditioning.

To determine the stopcock position for each activity, we'll go through them one by one:

1. At the beginning of a titration: The stopcock should be completely closed. This ensures that no titrant is released from the buret until you are ready to begin the titration process.

2. Close to the calculated endpoint of a titration: The stopcock should be partially open. As you approach the endpoint, you'll want to slow down the titrant flow to ensure a more accurate and precise reading of the endpoint.

3. Filling the buret with titrant: The stopcock should be completely open. This allows for quick and efficient filling of the buret with the titrant.

4. Conditioning the buret with titrant: The stopcock should be completely open initially to fill the buret, then partially open to release some titrant and wet the inner walls of the buret. This ensures that the buret is properly coated with the titrant for accurate measurements during titration.

In summary, for each activity, you should set the stopcock as follows: completely closed at the beginning of titration, partially open near the endpoint, completely open when filling the buret, and partially open during buret conditioning.

To know more about titration process :

https://brainly.com/question/10025728

#SPJ11

The concentration of the reactant after precisely two days is 4.62 M.

For a zero-order reaction, the rate is independent of the concentration and is given by the expression:

rate = k

where k is the rate constant.

The integrated rate law for a zero-order reaction is:

[A] = -kt + [A]₀

where [A] is the concentration of the reactant at time t, [A]₀ is the initial concentration of the reactant, k is the rate constant, and t is time.

Substituting the given values into the equation, we get:

[A] = -kt + [A]₀

[A] = -0.0119 M/hr * (224 hr) + 5.19 M

[A] = -0.5712 M + 5.19 M

[A] = 4.6188 M

Rounding off to three significant figures and two decimal places, we get the final concentration as 4.62 M.

To know more about rate constant, here

brainly.com/question/30787205

#SPJ4

The pressure of a gas is directly proportional to the number of moles of gas present, and inversely proportional to the volume of the container. Therefore, given the temperature of the gas in the tire remains constant, the pressure of the gas can be calculated using the ideal gas law:

PV = nRT

Where P is pressure, V is volume, n is number of moles, R is the ideal gas constant, and T is temperature.

In this case, the number of moles is 0.448 mol, the temperature is 28°C (or 301 K), and the volume is 7.32 l.

Plugging in all the values, we get:

P = (0.448 mol) × (8.314 L·atm·K−1·mol−1) × (301 K) / (7.32 l)

P = 4.20 atm

Therefore, the pressure of the gas in the tire is 4.20 atm.

Know more about Ideal gas law here

https://brainly.com/question/28257995#

#SPJ11

The first step is to calculate the molar flow rate of fuel, oxidizer, and product. This is done by dividing the mass flow rate (0.5 kg/s) by the molecular weight of each species (29 kg/kmol).

Molecular is a term used to describe the smallest units of matter. Molecules are made up of atoms and are held together by a chemical bond, which involves the sharing of electrons between atoms.

This gives us the following molar flow rates:

Fuel: 0.017 kmol/s

Oxidizer: 0.027 kmol/s

Product: 0.046 kmol/s

Next, we need to calculate the enthalpy change for the reaction. Since we are dealing with a single product species, the enthalpy change can be calculated using the following equation:

ΔH = (hf f o , + hf ox o , - hf o , pr) * n

Where:

hf f o , = Enthalpy of formation of fuel

hf ox o , = Enthalpy of formation of oxidizer

hf o , pr = Enthalpy of formation of product

n = Molar flow rate of product

Substituting the given values, we get the following:

ΔH = (-2000 + 0 - (-4000)) * 0.046 = 920 kJ/s

Now we can calculate the heat of reaction by multiplying the enthalpy change with the molar flow rate of the reactants. This gives us the following result:

Heat of reaction = (0.017 kmol/s * 920 kJ/s) + (0.027 kmol/s * 920 kJ/s) = 24.12 kJ/s

We can then calculate the temperature of the reactor by subtracting the heat loss (2000 W) from the heat of reaction and dividing by the total mass flow rate of the reactants (0.5 kg/s) multiplied by the specific heat capacity (1100 J/kg-K). This gives us the following result:

T = (24.12 kJ/s - 2000 W) / (0.5 kg/s * 1100 J/kg-K) = 436 K

Finally, we can calculate the residence time by dividing the volume of the reactor (0.003 m3) by the total mass flow rate of the reactants (0.5 kg/s). This gives us the following result:

Residence time = 0.003 m3 / 0.5 kg/s = 0.006 s

To learn more about molecular

https://brainly.com/question/26388921

#SPJ4

The temperature in the reactor is approximately 10.74 K. and 0.006 s.  

The temperature in the reactor and the residence time, we need to solve the following set of equations:

dU = w + Q / m

Next, we need to find the rate of change of mass flow rate, which is given by:

dm = Fv - D

here Fv is the volume flow rate of reactants and D is the diffusion rate of the product.

Finally, we can use the above equations to find the temperature in the reactor and the residence time as follows:

Temperature in the reactor:

T = (dU / Q) / (m / cP)

here cP is the specific heat at constant pressure.

Residence time:

t = (m / D)

We can assume that the reactants have a volume flow rate of 0.5 kg/s and the product species has a volume flow rate of 0.001 kg/s. Therefore, the mass flow rate of the reactants is:

m = 0.5 kg/s * 0.002 m3/kg = 0.001 kg/s

The diffusion rate of the product can be calculated as:

D = k * (yox - yf) / (yf + yox)

here k is the reaction rate constant and (yox - yf) / (yf + yox) is the molar fraction of the product species.

Using the values of k, m, and (yox - yf) / (yf + yox) from the problem statement, we can calculate the diffusion rate of the product as:

D = 1 * (0.003 - 0.2) / (0.2 + 0.003)

= 0.00006 / 0.003

= 0.1833

Therefore, the residence time of the reactor is:

t = (0.001 kg/s / 0.1833 kg/mol) = 0.051 s

The temperature in the reactor is given by:

T = (dU / Q) / (m / cP)

here cP is the specific heat at constant pressure of the reactants, which is 1100 J/kg-K.

T = (w + Q / m) / (0.001 kg/s / 1100 J/kg-K) / (0.001 kg/s / 0.003 m3/kg)

= 10.74 K

Residence time = 0.003 m3 / 0.5 kg/s = 0.006 s

Therefore, the temperature in the reactor is approximately 10.74 K and 0.006 s.  

Learn more about reactor visit: brainly.com/question/27823859

#SPJ4

There are several definitions of acids and bases, and each definition provides a unique perspective on their properties and behaviors.

Arrhenius Definition:

According to the Arrhenius definition, an acid is a substance that dissociates in water to form hydrogen ions (H+), while a base is a substance that dissociates in water to form hydroxide ions (OH-).

For example, hydrochloric acid (HCl) dissociates in water to form H+ and Cl- ions:

HCl → H+ + Cl-

On the other hand, sodium hydroxide (NaOH) dissociates in water to form Na+ and OH- ions:

NaOH → Na+ + OH-

Characteristics for identification:

Acids typically have a sour taste and can cause a burning sensation on the skin. Bases have a bitter taste and can feel slippery to the touch. They also typically have a higher pH value (greater than 7) in aqueous solutions.

Bronsted-Lowry Definition:

According to the Bronsted-Lowry definition, an acid is a substance that donates a proton (H+) to another molecule or ion, while a base is a substance that accepts a proton (H+) from another molecule or ion.

In this reaction, acetic acid is the acid because it donates a proton, while water is the base because it accepts a proton.

Characteristics for identification:

Acids and bases in the Bronsted-Lowry sense are identified by the presence or absence of a hydrogen ion. An acid must contain a hydrogen ion that can be donated to a base, while a base must have an available lone pair of electrons to accept a hydrogen ion.

Lewis Definition:

According to the Lewis definition, an acid is a substance that accepts a pair of electrons, while a base is a substance that donates a pair of electrons.

In this reaction, boron trifluoride is the acid because it accepts a pair of electrons, while ammonia is the base because it donates a pair of electrons.

Characteristics for identification:

Acids and bases in the Lewis sense are identified by their electron-pair accepting or donating abilities. An acid must be able to accept a pair of electrons, while a base must be able to donate a pair of electrons.

Learn more about acid Visit: brainly.com/question/2927542

#SPJ4

Correct Question:

Explain the different definitions of acid and base. Give an example of each and the characteristics of your identification.

[tex]CS_2[/tex]  is the limiting reactant in the reaction.

The balanced chemical equation for the reaction is:

3 [tex]CS_2[/tex] + 6 [tex]NaOH[/tex] → 2 [tex]Na_2CS_3[/tex] + [tex]Na_2CS_3[/tex] + 3 [tex]H_2O[/tex]

To determine the limiting reactant, we need to calculate the amount of product that each reactant can produce and compare it to the actual amount of product that is formed.

First, we need to convert the mass of [tex]CS_2[/tex] to moles:

118.3 g [tex]CS_2[/tex] × (1 mol [tex]CS_2[/tex] /76.14 g [tex]CS_2[/tex]) = 1.555 mol [tex]CS_2[/tex]

Next, we need to calculate the amount of product that can be formed from 1.555 mol of [tex]CS_2[/tex]. According to the balanced equation, 3 mol of [tex]CS_2[/tex] will produce 2 mol of [tex]Na_2CS_3[/tex]. Therefore, 1.555 mol of [tex]CS_2[/tex] will produce:

(2/3) × 1.555 mol = 1.037 mol [tex]Na_2CS_3[/tex]

Now, let's calculate the amount of product that can be formed from 3.12 mol of [tex]NaOH[/tex]. According to the balanced equation, 6 mol of [tex]NaOH[/tex] will produce 2 mol of [tex]Na_2CS_3[/tex]. Therefore, 3.12 mol of [tex]NaOH[/tex] will produce:

(2/6) × 3.12 mol = 1.04 mol [tex]Na_2CS_3[/tex]

Comparing the amount of product that can be formed from each reactant, we see that 1.037 mol of [tex]Na_2CS_3[/tex] can be produced from the 1.555 mol of [tex]CS_2[/tex], while 1.04 mol of [tex]Na_2CS_3[/tex] can be produced from the 3.12 mol of [tex]NaOH[/tex]. Therefore, the limiting reactant in the reaction is [tex]CS_2[/tex].

For more such questions on reactant, click on:

https://brainly.com/question/29109077

#SPJ11

To calculate the equilibrium concentrations, we first need to determine the initial concentrations of each gas.

The initial concentration of CO is 0.400 mol/5.00 L = 0.0800 M, Br2 is 0.300 mol/5.00 L = 0.0600 M, and COBr2 is 0.0200 mol/5.00 L = 0.00400 M.

The balanced equation for the reaction is:

CO(g) + Br2(g) ⇌ COBr2(g)

Let's assume that at equilibrium, the concentrations of COBr2 is x M. Therefore, the concentrations of CO and Br2 will be (0.0800 - x) M and (0.0600 - x) M, respectively.

The equilibrium constant expression (Kc) for this reaction is:

Kc = [COBr2] / ([CO] * [Br2])

Substituting the equilibrium concentrations into the Kc expression, we have:

Kc = (x) / ((0.0800 - x) * (0.0600 - x))

Solving for x using the given values and the equation above, we find x ≈ 0.0040 M.

Therefore, the equilibrium concentrations for the gases are:

[CO] ≈ 0.0760 M

[Br2] ≈ 0.0560 M

[COBr2] ≈ 0.0040 M

Know more about  equilibrium concentration here

https://brainly.com/question/16645766#

#SPJ11

In this sample there are 1.51 x 10^24 molecules of sucrose present in it.

To determine the number of molecules of sucrose present in the sample, we need to first calculate the number of moles of carbon present in the sample.

The molecular formula of sucrose (C12H22O11) contains 12 carbon atoms.

So, 3.6 x 10^24 atoms of carbon is equal to 3.6 x 1024/12 = 3 x 1023 moles of carbon.

Now, we can use the Avogadro's number (6.022 x 10^23 molecules per mole) to convert the number of moles of carbon to the number of molecules of sucrose:

Number of molecules of sucrose = 3 x 10^23 x (1 molecule of sucrose / 12 molecules of carbon) x (6.022 x 10^23 molecules per mole)

Number of molecules of sucrose = 1.51 x 10^24 molecules

Therefore, there are 1.51 x 10^24 molecules of sucrose present in the sample.

Know more about Avogadro's Number here:

https://brainly.com/question/23944317

#SPJ11

Alanine is also a non-polar amino acid and would have similar Protein structure of leucine. Thus, enzyme activity should be maintained because the polar basic should not undergo major change.

Alanine is an amino acid this is used to make proteins. It is used to interrupt down tryptophan and nutrition B-6. It is a supply of power for muscular tissues and the principal frightened gadget. It strengthens the immune gadget and allows the frame use sugars. Alanine is a nonacidic α-amino acid. Its aspect chain (a methyl group) is neither acidic (it isn't greater acidic than water) nor basic (it does now no longer have a nitrogen atom lone pair that isn't delocalized via way of means of resonance).

To learn more about amino acid check the link below-

https://brainly.com/question/14351754

#SPJ4

Answer:

A chemical formula tells us the number of atoms of each element in a compound.

Explanation:

Explanation:

formula shows

Measuring the volume of rinse water does not significantly impact the overall volume during titration.

Titration is a commonly employed laboratory method that involves determining the concentration of an unknown solution by reacting it with a solution of known concentration, known as the titrant, until the chemical reaction between the two is fully completed. This process requires precision and accuracy to ensure reliable results are obtained.

To guarantee that all reactants are thoroughly mixed and avoid any skewing of results due to reactants left on the walls of the container, it is useful to rinse the sides of the beaker or flask with distilled water during titration. However, measuring the volume of rinse water used is not necessary as it does not significantly impact the overall volume of titrant used in titration. It is crucial to be mindful not to use an excessive amount of rinse water as this can dilute the sample and compromise result accuracy. Rest assured that accuracy will not be affected by the volume of rinse water used, but it's essential to maintain a balance between thorough rinsing and preserving sample concentration.

To know more about titration, click here

https://brainly.com/question/31271061

#SPJ1

A solution of potassium hydroxide reacts completely with a solution of nitric acid. Potassium nitrate will remain after the water dissolves in solid mixture.

What is a solid mixture?

This kind of mixture consists of two or more solids. Alloys are what are used when the solids are made of metals. Sand and sugar, stainless steel, etc. are a few examples of solid-solid combinations.

2KOH(aq) + HNO₃(aq) → KNO₃(aq) + 2H₂O(l)

When a solution of potassium hydroxide (KOH) reacts completely with a solution of nitric acid (HNO₃), potassium nitrate (KNO₃) is formed in aqueous form, along with water (H₂O). The solid mixture that will remain after the water evaporates is potassium nitrate (KNO₃).

To know more about solid mixture from the given link:

https://brainly.com/question/14331104

#SPJ4

Approximately 0.0769 liters (76.9 mL) of solution is required to create a 1.3 x [tex]10^-2[/tex] M concentration of calcium hydroxide using [tex]1.0 x 10^-3[/tex] moles of solute.

A solute is a material that a solvent can dissolve into a solution. A solute can take on various shapes. It might exist as a solid, a liquid, or a gas. Solvent refers to the component of a solution that is most prevalent. It is the fluid in which the solute has been dissolved.
Molarity (M) = moles of solute / volume of solution (L)
Here, you're given the desired molarity ([tex]1.3 x 10^-2[/tex] M) and the moles of solute ([tex]1.0 x 10^-3[/tex]moles). You need to find the volume of solution (in liters).

Volume (L) = moles of solute / Molarity (M)
Now, plug in the given values:
Volume (L) = [tex](1.0 x 10^-3[/tex] moles) / ([tex]1.3 x 10^-2[/tex]M)
Volume (L) ≈ 0.0769 L

For more such question on hydroxide
https://brainly.com/question/21393201

#SPJ11

The change in temperature of the 5.5 g piece of metal when heated with an energy transfer of 9624 J and a specific heat of 0.74 J/g°C is approximately 2364.84°C.

Given a 5.5 g piece of metal that is heated with an energy transfer of 9624 J. The specific heat of the metal is 0.74 J/g°C. To find the change in temperature, you can use the formula:
q = mcΔT

where q represents the amount of energy transferred (9624 J), m is the mass of the metal (5.5 g), c is the specific heat capacity (0.74 J/g°C), and ΔT is the change in temperature.

First, rearrange the formula to solve for ΔT:
ΔT = q / (mc)

Next, substitute the given values into the formula:
ΔT = 9624 J / (5.5 g × 0.74 J/g°C)

Now, calculate the change in temperature:
ΔT = 9624 J / (4.07 J/°C) = 2364.84°C

So, the change in temperature of the 5.5 g piece of metal when heated with an energy transfer of 9624 J and a specific heat of 0.74 J/g°C is approximately 2364.84°C.

To know more about how to find the change in temperature:

https://brainly.com/question/31279340

#SPJ11

Answer:

0.108L HCl

Explanation:

5.32 g zinc * 1 mol zinc/65.38g zinc * 2 mol HCl/1 mol zinc * L HCl/1.5 mol HCl = 0.108L HCl

The freezing point of the lithium bromide solution is approximately -1.06°C.

To determine the freezing point of the solution, we need to use the freezing point depression formula:

ΔTf = Kf * molality

where ΔTf is the freezing point depression, Kf is the freezing point depression constant (which depends on the solvent), and molality is the concentration of the solution in mol/kg.

First, we need to calculate the molality of the solution:

molality = moles of solute / mass of solvent (in kg)

The mass of 525 mL of water is:

mass = volume * density = 525 mL * 1 g/mL = 525 g

The number of moles of lithium bromide is:

moles of LiBr = 0.300 mol

Therefore, the molality of the solution is:

molality = 0.300 mol / 0.525 kg = 0.571 mol/kg

The freezing point depression constant for water is 1.86 °C/m. Therefore, the freezing point depression is:

ΔTf = 1.86 °C/m * 0.571 mol/kg = 1.06306 °C

Finally, to find the freezing point of the solution, we need to subtract the freezing point depression from the freezing point of pure water (0°C):

Freezing point = 0°C - 1.06306°C = -1.06306°C

Therefore, the freezing point of the lithium bromide solution is approximately -1.06°C.

To know more about freezing point refer to-

https://brainly.com/question/3121416

#SPJ11

The volume at standard pressure will be 293 mL.

To find the volume of gas at standard pressure, we need to use the ideal gas law, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is the temperature.

Since the temperature remains constant, we can rearrange the equation to solve for the volume at standard pressure:

(P₁V₁) / P₂ = V₂

Where P₁ is the initial pressure, V₁ is the initial volume, P₂ is the final pressure (standard pressure), and V₂ is the final volume (what we're solving for).

Plugging in the given values, we get:

(112 kPa)(259 mL) / (1 atm) = V₂

Simplifying and converting units of pressure and volume, we get:

(112000 Pa)(0.259 L) / (1.01325 × 10⁵ Pa) = V₂

Solving for V₂, we get:

V₂ = 0.293 L = 293 mL

Rounding to 3 significant figures, we get that the volume at standard pressure will be 293 mL.

To know more about standard pressure, refer here:

https://brainly.com/question/29129606#

#SPJ11

In the electrowinning process, the energy applied using 5 mol of IR photons with a wavelength of 32 nm is 1.863 MJ.

1. Convert wavelength to energy using the equation: E = (hc)/λ, where h is Planck's constant (6.626×10⁻³⁴ Js), c is the speed of light (3×10⁸ m/s), and λ is the wavelength (32 nm = 32×10⁻⁹ m).

2. Calculate the energy of one IR photon: E = (6.626×10⁻³⁴ Js × 3×10⁸ m/s) / (32×10⁻⁹ m) = 6.184×10⁻¹⁹ J.

3. Determine the energy for 5 moles of IR photons: Total energy = 6.184×10⁻¹⁹ J × 5 × 6.022×10²³ photons/mol = 1.863×10⁶ J.

4. Convert energy to megajoules: 1.863×10⁶ J = 1.863 MJ.

To know more about Planck's constant click on below link:

https://brainly.com/question/30763530#

#SPJ11

The new volume of the tire is 15.6 L if the temperature is increased from 22° C to 34°C if the previous volume was 15 L.

The relation between pressure and volume in a system is explained by Charles's Law. It states that the temperature is inversely proportional to the volume in the system. It is expressed as:

[tex]T_2V_1=T_1V_2[/tex]

where T is the temperature

V is the volume

with no change in pressure and a number of moles of gases.

Given in the question,

[tex]V_1[/tex] = 15 L

[tex]T_1[/tex] = 22°C = 295 K

[tex]T_2[/tex] = 34°C = 307 K

307 * 15 = 295 * [tex]V_2[/tex]

[tex]V_2[/tex] = 15.6 L

Learn more about Charle's Law:

https://brainly.com/question/16927784

#SPJ4

Answer:Starting with 51,300 grams of water, we can theoretically produce 45,592 grams of oxygen using electrolysis, based on the balanced equation 2H₂O → 2H₂ + O₂.